Use of EDTA derivatization to characterize interactions between oligodeoxyribonucleoside methylphosphonates and nucleic acids

EDTA-derivatized oligonucleoside methylphosphonates were prepared and used to characterize hybridization between the oligomers and single-stranded DNA or RNA. The melting temperatures of duplexes formed between an oligodeoxyribonucleotide 35-mer and complementary methylphosphonate 12-mers were 4-12 degrees C higher than those of duplexes formed by oligodeoxyribonucleotide 12-mers as determined by spectrophotometric measurements. Derivatization of the methylphosphonate oligomers with EDTA reduced the melting temperature by 5 degrees C. Methylphosphonate oligomer-nucleic acid complexes were stabilized by base stacking interactions between the terminal bases of the two oligomers binding to adjacent binding sites on the target. In the presence of Fe2+ and DTT, the EDTA-derivatized oligomers produce hydroxyl radicals that cause degradation of the sugar-phosphate backbone of both targeted DNA and RNA. Degradation occurs specifically in the region of the oligomer binding site and is approximately 20-fold more efficient for single-stranded DNA than for RNA. In comparison to the presence of one oligomer, the extent of target degradation was increased considerably by additions of two oligomers that bind at adjacent sites on the target. For example, the extent of degradation of a single-stranded DNA 35-mer caused by two contiguously binding oligomers, one of which was derivatized by EDTA, was approximately 2 times greater than that caused by the EDTA-derivatized oligomer alone. Although EDTA-derivatized oligomers are stable for long periods of time in aqueous solution, they undergo rapid autodegradation in the presence of Fe2+ and DTT with half-lives of approximately 30 min. This autodegradation reaction renders the EDTA-derivatized oligomers unable to cause degradation of their complementary target nucleic acids.(ABSTRACT TRUNCATED AT 250 WORDS)     

Affinity purification of DNA and RNA from environmental samples with peptide nucleic acid clamps

Bispeptide nucleic acids (bis-PNAs; PNA clamps), PNA oligomers, and DNA oligonucleotides were evaluated as affinity purification reagents for subfemtomolar 16S ribosomal DNA (rDNA) and rRNA targets in soil, sediment, and industrial air filter nucleic acid extracts. Under low-salt hybridization conditions (10 mM NaPO(4), 5 mM disodium EDTA, and 0.025% sodium dodecyl sulfate [SDS]) a PNA clamp recovered significantly more target DNA than either PNA or DNA oligomers. The efficacy of PNA clamps and oligomers was generally enhanced in the presence of excess nontarget DNA and in a low-salt extraction-hybridization buffer. Under high-salt conditions (200 mM NaPO(4), 100 mM disodium EDTA, and 0.5% SDS), however, capture efficiencies with the DNA oligomer were significantly greater than with the PNA clamp and PNA oligomer. Recovery and detection efficiencies for target DNA concentrations of > or =100 pg were generally >20% but depended upon the specific probe, solution background, and salt condition. The DNA probe had a lower absolute detection limit of 100 fg of target (830 zM [1 zM = 10(-21) M]) in high-salt buffer. In the absence of exogenous DNA (e.g., soil background), neither the bis-PNA nor the PNA oligomer achieved the same absolute detection limit even under a more favorable low-salt hybridization condition. In the presence of a soil background, however, both PNA probes provided more sensitive absolute purification and detection (830 zM) than the DNA oligomer. In varied environmental samples, the rank order for capture probe performance in high-salt buffer was DNA > PNA > clamp. Recovery of 16S rRNA from environmental samples mirrored quantitative results for DNA target recovery, with the DNA oligomer generating more positive results than either the bis-PNA or PNA oligomer, but PNA probes provided a greater incidence of detection from environmental samples that also contained a higher concentration of nontarget DNA and RNA. Significant interactions between probe type and environmental sample indicate that the most efficacious capture system depends upon the particular sample type (and background nucleic acid concentration), target (DNA or RNA), and detection objective.     

Biotin derivatives of endothelin: utilization for affinity purification of endothelin receptor.

Three different types of biotinylated endothelin 1 (ET-1) derivatives, [Cys1]-biotinylated ET-1, [Lys9]-biotinylated ET-1, and [Cys1][Lys9]-dibiotinylated ET-1, were obtained when the biotinylation reaction was carried out with sulfosuccinimidyl-6-(biotinamido)hexanoate in an aqueous solvent. The binding of [Lys9]-biotinylated ET-1 to the ET receptor was as efficient as that of natural ET-1, whereas the binding of either [Cys1]-biotinylated ET-1 or [Cys1][Lys9]-dibiotinylated ET-1 was significantly reduced. When ET-1 was reacted with succinimidyl-6-(biotinamido)hexanoate in an organic solvent, ET-1 was exclusively modified at lysine 9. The ET receptor was then isolated from human placenta by affinity chromatography with [Lys9]-biotinylated ET-1 and avidin-agarose. The purified ET receptor was active in ET binding and was resolved by sodium dodecyl sulfate-polyacrylamide gel electrophoresis into two polypeptides with apparent molecular masses of 45 and 35 kDa. The NH2-terminal amino acid sequence indicated that the two polypeptides were from an identical subtype of the ET receptor (ETB, the ligand-nonselective type). A signal peptide from Met1 to Gly26 was missing from the 45-kDa ETB, whereas 64 amino acids at the NH2 terminus were missing from the 35-kDa ETB due to proteolytic cleavage which occurred between Arg64 and Ser65. Indeed, incubation of purified ETB with endopeptidase Arg-C resulted in degradation of the 45-kDa ETB, giving rise to the 35-kDa species by a specific cleavage at Arg64. The 35-kDa ETB was active in binding to ET-1, indicating that the NH2-terminal 64-amino-acid residues are not essential for ligand binding.(ABSTRACT TRUNCATED AT 250 WORDS)     

Oligonucleotide binding to the native and denatured conformers of yeast transfer RNA-3 Lea

The equilibrium binding patterns of complementary oligonucleotides to the native and denatured conformers of yeast transfer RNA₃^Leu have been determined. The pattern of binding to the native conformer follows that observed previously with other tRNAs. The results indicate that the anticodon loop and 3′ terminus are free in solution, and that all stems of the cloverleaf appear intact, although the dihydrouracil and “extra arm” stems are sufficiently weak to be subject to competitive binding by the probe oligomers. The T ΨC loop is also inaccessible to oligomer binding, while the dihydrouracil loop shows a low level of binding suggestive of oligomer competition with existing RNA structure. By contrast, in the denatured conformer the dihydrouracil loop and stem show strong oligomer binding characteristics of random RNA segments, whereas the anticodon loop no longer binds complementary oligomers. Binding to other regions remains unchanged, suggesting that the three major cloverleaf stems are intact. These observations are used as a basis for consideration of models for the two conformers.     

Affinity Purification of DNA and RNA from Environmental Samples with Peptide Nucleic Acid Clamps

Bispeptide nucleic acids (bis-PNAs; PNA clamps), PNA oligomers, and DNA oligonucleotides were evaluated as affinity purification reagents for subfemtomolar 16S ribosomal DNA (rDNA) and rRNA targets in soil, sediment, and industrial air filter nucleic acid extracts. Under low-salt hybridization conditions (10 mM NaPO₄, 5 mM disodium EDTA, and 0.025% sodium dodecyl sulfate [SDS]) a PNA clamp recovered significantly more target DNA than either PNA or DNA oligomers. The efficacy of PNA clamps and oligomers was generally enhanced in the presence of excess nontarget DNA and in a low-salt extraction-hybridization buffer. Under high-salt conditions (200 mM NaPO₄, 100 mM disodium EDTA, and 0.5% SDS), however, capture efficiencies with the DNA oligomer were significantly greater than with the PNA clamp and PNA oligomer. Recovery and detection efficiencies for target DNA concentrations of ≥100 pg were generally >20% but depended upon the specific probe, solution background, and salt condition. The DNA probe had a lower absolute detection limit of 100 fg of target (830 zM [1 zM = 10⁻²¹ M]) in high-salt buffer. In the absence of exogenous DNA (e.g., soil background), neither the bis-PNA nor the PNA oligomer achieved the same absolute detection limit even under a more favorable low-salt hybridization condition. In the presence of a soil background, however, both PNA probes provided more sensitive absolute purification and detection (830 zM) than the DNA oligomer. In varied environmental samples, the rank order for capture probe performance in high-salt buffer was DNA > PNA > clamp. Recovery of 16S rRNA from environmental samples mirrored quantitative results for DNA target recovery, with the DNA oligomer generating more positive results than either the bis-PNA or PNA oligomer, but PNA probes provided a greater incidence of detection from environmental samples that also contained a higher concentration of nontarget DNA and RNA. Significant interactions between probe type and environmental sample indicate that the most efficacious capture system depends upon the particular sample type (and background nucleic acid concentration), target (DNA or RNA), and detection objective.     

Detection of peptide nucleic acids in tissue extracts of treated animals by gel mobility shift assay

We have developed a sensitive and reproducible gel mobility shift assay to detect PNA oligomers in tissue of treated animals. PNA present in purified tissue extracts of treated animals is hybridized to a 33P-labelled DNA oligomer probe, and analyzed by polyacrylamide gel electrophoresis. The PNA-DNA hybrid migrates more slowly than the DNA probe alone and can be quantified relative to a standard curve. This detection method is useful for detecting PNAs in many different tissues, including brain, heart, kidney, liver, spleen, and serum, as well as cells in culture.     

Non-isotopic RNA probes. Comparison between different labels and detection systems

Several studies have shown the use of non-radioactive labelled DNA probes for in situ hybridisation, mainly to identify cellular DNA. In this study mRNA in situ hybridisation was performed on rat pituitary with biotinylated complementary (c) RNA probes for rat prolactin and growth hormone (GH), and compared with radioactive 35S-radiolabelled probes. Biotinylated cRNA probes were labelled with either biotin-11-UTP or with allylamine-UTP, the latter method being able to produce a higher yield of labelled RNA. Different detection systems were tested, and hybridisation signal was seen in cells of anterior pituitary with both types of biotinylated probes. The signals were detected using either avidin-biotin-complex with peroxidase (ABC), peroxidase-anti-peroxidase (PAP) or gold-silver methods. ABC peroxidase detected using glucose oxidase-diaminobenzidine (DAB)-nickel solution appeared to be the best method for detecting labelled RNA probes, with very strong signal and low background. The biotinylated probes were comparable in sensitivity to the radiolabelled probes in detecting prolactin and GH mRNAs in the anterior lobe of the rat pituitary. These results indicate an alternative methods of labelling and detection of biotinylated probes which could have a potential role in research and diagnostic techniques.     

Synthesis and Activity of Modified Cytidine 5′-Monophosphate Probes for T4 RNA Ligase 1

We describe the synthesis of a series of unique base modified ligation probes such as p(5′)C-4-ethylenediamino 3, p(5′)C-4-biotin 4, and pre-adenylated form A(5′)pp(5′)C-4-biotin 6 and tested their biological activity with T4 RNA ligase 1 using a standard pCp probe 1 as a control. The intermolecular ligation assay was developed using a 5′-FAM labeled 24 mer single-stranded (ss) RNA and the average ligation efficiencies for pCp 1, p(5′)C-4-ethylenediamino 3, p(5′)C-4-biotin 4, and pre-adenylated form A(5′)pp(5′)C-4-biotin 6 were found to be 44%, 81%, 39% and 16% respectively, as determined using a denaturing gel analysis. Furthermore, confirmation of the ligation activity of the biotinylated probes to the RNA substrate was confirmed by streptavidin conjugation and analysis by nondenaturing gel electrophoresis. These results strongly suggest that the new probes are valid substrates for T4 RNA ligase 1 and therefore could be useful for developing a miRNA detection system that includes rapid isolation, efficient labeling and detection of miRNAs on sensitivity-enhanced microarrays.     

Non-isotopic RNA probes

Summary Several studies have shown the use of non-radioactive labelled DNA probes for in situ hybridisation, mainly to identify cellular DNA. In this study mRNA in situ hybridisation was performed on rat pituitary with biotinylated complementary (c) RNA probes for rat prolactin and growth hormone (GH), and compared with radioactive ³⁵S-radiolabelled probes. Biotinylated cRNA probes were labelled with either biotin-11-UTP or with allylamine-UTP, the latter method being able to produce a higher yield of labelled RNA. Different detection systems were tested, and hybridisation signal was seen in cells of anterior pituitary with both types of biotinylated probes. The signals were detected using either avidin-biotin-complex with peroxidase (ABC), peroxidase-anti-peroxidase (PAP) or gold-silver methods. ABC peroxidase detected using glucose oxidase-diaminobenzidine (DAB)-nickel solution appeared to be the best method for detecting labelled RNA probes, with very strong signal and low background. The biotinylated probes were comparable in sensitivity to the radiolabelled probes in detecting prolactin and GH mRNAs in the anterior lobe of the rat pituitary. These results indicate an alternative methods of labelling and detection of biotinylated probes which could have a potential role in research and diagnostic techniques.     

Fluorescent probe and permeability to cells of isopoly (S-carboxymethyl-L-cysteine) derivative of nucleic acid bases.

Isopoly(S-carboxymethyl-L-cysteine) derivatives of nucleic acid bases were found to form stable complex with oligo-DNA in vitro. Fluorescent probed isopoly(S-carboxymethyl cysteine) derivatives of nucleic acid bases were prepared as antisense oligomers. The transfection of the oligomer into cells was carried out by HVJ-liposome method. Fluorescence was observed from the cells treated with HVJ-liposome including fluorescent probed oligomers.     

Identification of a rRNA/chloramphenicol interaction site within the peptidyltransferase center of the 50 S subunit of the Escherichia coli ribosome.

We have used oligodeoxyribonucleotide probes to investigate possible interactions between chloramphenicol and portions of the rRNA contained within the peptidyltransferase center of the Escherichia coli ribosome. Oligodeoxyribonucleotide probes complementary to bases 2448-2454, 2468-2482, and 2497-2505 of 23 S rRNA were hybridized to 50 S subunits in situ. Probe binding was qualitatively assessed by sucrose gradient centrifugation. Each probe was shown to bind specifically with its intended binding site through digestion of the rRNA within the RNA/DNA hetero-duplexes with RNase H and analysis of the digestion fragments using gel electrophoresis. Competitive binding experiments were conducted between each probe and the antibiotics chloramphenicol and erythromycin. The binding of a probe complementary to bases 2497-2505 was attenuated by 70% upon the binding of chloramphenicol. A probe complementary to bases 2468-2482 showed an increase in binding of 14% while binding of a probe complementary to bases 2448-2454 was not affected by chloramphenicol binding. Erythromycin did not affect the binding of any of these probes to 50 S subunits. These results suggest that bases within the 2497-2505 region of 23 S rRNA in E. coli may be involved in a chloramphenicol/rRNA interaction.     

Identification of the site of cross-linking in 16S rRNA of an aromatic azide photoaffinity probe attached to the 5'-anticodon base of A site bound tRNA

The site of Escherichia coli 16S ribosomal RNA cross-linked to the 5'-anticodon base of A site bound E. coli valyl-tRNA was identified. Cross-linking was via the affinity probe 6-[(2-nitro-4-azidophenyl)amino]caproate (NAK) or 3-[[2-[(2-nitro-4-azidophenyl)amino]ethyl]dithio]propionate (SNAP) attached to the carboxyl group of the 5'-anticodon base 5-(carboxyethoxy)uridine via an ethylenediamine spacer [Gornicki, P., Ciesiolka, J., & Ofengand, J. (1985) Biochemistry (preceding paper in this issue)]. With both probes, RNase T1 digestion of the isolated 16S RNA-tRNA covalent complex, 5'-32P postlabeling, and gel electrophoresis yielded two oligonucleotides larger than any fragments from non-cross-linked tRNA or rRNA. Appearance of the oligomers was dependent on the presence of the probe on the tRNA. Unmodified tRNA in the A and/or P sites did not yield any product. The presence of elongation factor Tu in the incubation mixture was also required. Dithiothreitol (DDT) treatment of the SNAP-induced covalent complex prior to electrophoresis also abolished the oligomers. Only the larger of the two oligomers (present in a 3:1 ratio) was sequenced. The SNAP dimer was cleaved with DTT, and the rRNA and tRNA oligomers were separated and sequenced as monomers. The NAK dimer was sequenced without cleavage by taking advantage of the differences in electrophoretic mobility among sequence and/or composition isomers of the same length. In both cases, the rRNA oligomer was identified as UACACACCG1401, and the nucleotide cross-linked was shown to be the C1400 residue. The expected tRNA modification site was also identified.(ABSTRACT TRUNCATED AT 250 WORDS)     

An alternative nonradioactive method for labeling DNA using biotin

An alternative nonradioactive labeling method and a highly sensitive technique for detecting specific DNA sequences are described. The labeling method requires the "Klenow" fragment of DNA polymerase I and random hexanucleotides (synthesized or naturally extracted) as a primer for the production of highly sensitive DNA probes. The system has three main steps: (i) labeling of DNA with biotinylated 11-dUTP; (ii) detection of biotinylated DNA by a one-step procedure with streptavidin-alkaline phosphatase complex; (iii) blocking of background with Tween 20. Twenty attograms (2 X 10(-17) g) of pBR322 plasmid DNA was detected by dot-blot hybridization. Upon Southern blot hybridization, 7.4 fg (7.4 X 10(-15) g) of pBR322 HindIII DNA was detected using the biotinylated pBR322 plasmid DNA probe; 40.8 ag and 7.4 fg of lambda HindIII DNA were detected with the biotinylated whole lambda DNA probe by dot and Southern blot hybridization, respectively. Specific bands were also detected with the biotinylated argininosuccinolyase probe upon Northern blotting of mouse poly(A+) RNA. Further applications for in situ hybridization are also described.     

A ribosomal DNA fragment of Listeria monocytogenes and its use as a genus-specific probe in an aqueous-phase hybridization assay.

cDNAs were prepared from the total RNA of Listeria monocytogenes ATCC 19118 and used as probes to screen a genomic library of the same strain. Four clones were identified which contained ribosomal DNA fragments. Recombinant DNA from one of them was fractionated and differentially hybridized with the cDNA probes to RNA of L. monocytogenes and Kurthia zopfii. The resulting hybridization pattern revealed an HpaII fragment of 0.8 kb that was specific for the L. monocytogenes strain. The nucleotide sequence of this fragment showed 159 bases of the 3' end of the 16S rRNA gene, 243 bases of the spacer region, and 382 bases of the 5' end of the 23S rRNA gene. In dot blot hybridization assays, the 32P-labeled 784-bp fragment was specific only for Listeria species. Dot blot assays revealed that the 32P-labeled fragment can easily detect > or = 10 pg of total nucleic acids from pure cultures of L. monocytogenes, which corresponds to approximately 300 bacteria. This fragment was also used as a probe in an assay named the heteroduplex nucleic acid (HNA) enzyme-linked immunosorbent assay. In this system, the biotinylated DNA probe is hybridized in the aqueous phase with target RNA molecules and then specific HNAs are captured by HNA-specific antibodies. Captured HNA molecules are revealed with an enzyme conjugate of streptavidin. In a preliminary HNA enzyme-linked immunosorbent assay, the 784-bp fragment maintained its specificity for Listeria spp. and could detect 5 x 10(2) cells in artificially contaminated meat homogenate.     

Advantages of 2'-O-methyl oligoribonucleotide probes for detecting RNA targets.

We have compared various kinetic and melting properties of oligoribonucleotide probes containing 2'-O-methylnucleotides or 2'-deoxynucleotides with regard to their use in assays for the detection of nucleic acid targets. 2'-O-Methyl oligoribonucleotide probes bound to RNA targets faster and with much higher melting temperatures (Tm values) than corresponding 2'-deoxy oligoribonucleotide probes at all lengths tested (8-26 bases). Tm values of both probes increased with length up to approximately 19 bases, with maximal differences in Tm between 2'-O-methyl and 2'-deoxy oligoribonucleotide probes observed at lengths of 16 bases or less. In contrast to RNA targets, 2'-O-methyl oligoribonucleotide probes bound more slowly and with the same Tm to DNA targets as corresponding 2'-deoxy oligoribonucleotide probes. Because of their greatly enhanced Tm when bound to RNA, 2'-O-methyl oligoribonucleotide probes can efficiently bind to double-stranded regions of structured RNA molecules. A 17 base 2'-O-methyl oligoribonucleotide probe was able to bind a double-stranded region of rRNA whereas the same 17 base 2'- deoxy oligoribonucleotide probe did not. Due to their enhanced Tm when bound to RNA targets, shorter 2'-O-methyl oligoribonucleotide probes can be used in assays in place of longer 2'-deoxy oligoribonucleotide probes, resulting in enhanced discrimination between matched and mismatched RNA targets. A 12 base 2'-O-methyl oligoribonucleotide probe had the same Tm as a 19 base 2'-deoxy oligoribonucleotide probe when bound to a matched RNA target but exhibited a much larger decrease in Tm than the 2'-deoxy oligoribonucleotide probe when bound to an RNA target containing either 1 or 2 mismatched bases. The increased Tm, faster kinetics of hybridization, ability to bind to structured targets and increased specificity of 2'-O-methyl oligoribonucleotide probes render them superior to corresponding 2'-deoxy oligoribonucleotides for use in assays that detect RNA targets.     

Microbial identification by immunohybridization assay of artificial RNA labels

Ribosomal RNA (rRNA) and engineered stable artificial RNAs (aRNAs) are frequently used to monitor bacteria in complex ecosystems. In this work, we describe a solid-phase immunocapture hybridization assay that can be used with low molecular weight RNA targets. A biotinylated DNA probe is efficiently hybridized in solution with the target RNA, and the DNA-RNA hybrids are captured on streptavidin-coated plates and quantified using a DNA-RNA heteroduplex-specific antibody conjugated to alkaline phosphatase. The assay was shown to be specific for both 5S rRNA and low molecular weight (LMW) artificial RNAs and highly sensitive, allowing detection of as little as 5.2 ng (0.15 pmol) in the case of 5S rRNA. Target RNAs were readily detected even in the presence of excess nontarget RNA. Detection using DNA probes as small as 17 bases targeting a repetitive artificial RNA sequence in an engineered RNA was more efficient than the detection of a unique sequence.