Supercapacitor Electrodes Obtained by Directly Bonding 2D MoS2 on Reduced Graphene Oxide

Layered molybdenum disulfide (MoS₂) is deposited by microwave heating on a reduced graphene oxide (RGO). Three concentrations of MoS₂ are loaded on RGO, and the structure and morphology are characterized. The first layers of MoS₂ are detected as being directly bonded with the oxygen of the RGO by covalent chemical bonds (Mo‐O‐C). Electrochemical characterizations indicate that this electroactive material can be cycled reversibly between 0.25 and 0.8 V in 1 m HClO₄ solution for hybrids with low concentrations of MoS₂ layers (LCMoS₂/RGO) and between 0.25 and 0.65 V for medium (MCMoS₂/RGO) and high concentrations (HCMoS₂/RGO) of MoS₂ layers on graphene. The specific capacitance measured values at 10 mV s^?1 are 128, 265, and 148 Fg^?1 for the MoS₂/RGO with low, medium, and high concentrations of MoS₂, respectively, and the calculated energy density is 63 W h kg^?1 for the LCMoS₂/RGO hybrid. This supercapacitor electrode also exhibits superior cyclic stability with 92% of the specific capacitance retained after 1000 cycles.     

A Study of Metal@Graphene Core–Shell Spherical Nano-Geometry to Enhance the SPR Tunability: Influence of Graphene Monolayer Shell Thickness

Graphene, new generation advance material of two dimensional hexagonal lattice having extraordinary optical signatures, is used as coating material to enhance the surface plasmon resonance (SPR) effect of core@shell metal nanospheres. In a core@shell nanosphere, we have chosen metal as a core and graphene monolayer (GML) as a shell. We have analysed optical signature of coated and non-coated nanospheres in terms of extinction efficiency (Q _ext) and tunabilty of surface plasmon resonances using electrostatic model, where particle size is much smaller than the wavelength of incident light. We analysed this model over different metals (silver, gold and aluminium) core, coated with different thickness of GML (d?=?0.1 to 0.5 nm). These core@shell nanospheres are embedded in refractive index media of air (n _em?=?1), SiO₂ (n _em?=?1.47) and TiO₂ (n _em?=?2.79). The Q _ext has been calculated by varying both the core radii as well as the GML shell thickness. Graphene-coated metal nanosphere exhibits SPRs that have wide range tunability from 300 to 1500 nm. In the presenting work, we also analysed that extinction efficiency for metal@GML is higher in TiO₂ than others. The optimum value of GML shell thickness is 0.4 nm for TiO₂, the magnitude of extinction efficiency is maximum for the optimum thickness. The tunability of these plasmonic resonances is highly dependent on the core@shell material, thickness of Graphene shell and surrounding environment while non-coated metal nano-spheres do not show appropriate SPR tunability.     

Modulation of Visible and Near-Infrared Surface Plasmon Resonance of Au Nanoparticles Based on Highly Doped Graphene

We study an active modulation of surface plasmon resonance (SPR) of Au nanoparticles based on highly doped graphene in visible and near-infrared regions. We find that compared to the traditional metal SPR, the SPR of Au nanoparticles based on graphene causes a remarkable blue shift. The field intensity in the gap is redistributed to standing wave. The field intensity of standing wave is about one order of magnitude higher than the traditional model. Moreover, the SPR of Au nanoparticles can be actively modulated by varying the graphene Fermi energy. We find the maximum modulation of field intensity of absorption spectra is more than 21.6 % at λ?=?822?nm and the amount of blue shift is 17.4 nm, which is about 2.14 % of the initial wavelength λ ₀?=?813.4?nm, with increasing monolayer graphene Fermi energy from 1.0 to 1.5 ev. We find that the SPR sensitivity to the refractive index n of the environment is about 642 nm per refractive index unit (RIU). The SPR wavelengths have a big blue shift, which is about 33 nm, with increasing number of graphene layers from 1 to 3, and some shoulders on the absorption spectra are observed in the models with multilayer graphene. Finally, we study the Au nanorod array based on monolayer graphene. We find that the blue shift caused by the graphene increases from 14 to 24 nm, with increasing gap g _y from 10 to 20 nm. Then, it decreases from 24 to 14 nm, with increasing gap g _y from 20 to 50 nm. This study provides a new way for actively modulating the optical and optoelectronic devices.     

MoS2/Graphene Nanosheets from Commercial Bulky MoS2 and Graphite as Anode Materials for High Rate Sodium‐Ion Batteries

Tuning heterointerfaces between hybrid phases is a very promising strategy for designing advanced energy storage materials. Herein, a low‐cost, high‐yield, and scalable two‐step approach is reported to prepare a new type of hybrid material containing MoS₂/graphene nanosheets prepared from ball‐milling and exfoliation of commercial bulky MoS₂ and graphite. When tested as an anode material for a sodium‐ion battery, the as‐prepared MoS₂/graphene nanosheets exhibit remarkably high rate capability (284 mA h g^?1 at 20 A g^?1 (≈30C) and 201 mA h g^?1 at 50 A g^?1 (≈75C)) and excellent cycling stability (capacity retention of 95% after 250 cycles at 0.3 A g^?1). Detailed experimental measurements and density functional theory calculation reveal that the functional groups in 2D MoS₂/graphene heterostructures can be well tuned. The impressive rate capacity of the as‐prepared MoS₂/graphene hybrids should be attributed to the heterostructures with a low degree of defects and residual oxygen containing groups in graphene, which subsequently improve the electronic conductivity of graphene and decrease the Na⁺ diffusion barrier at the MoS₂/graphene interfaces in comparison with the acid treated one.     

Synthesis, spectroscopic, thermal and X-ray structure characterization of 1,3-propanediammonium tetrathiomolybdate and N,N,N′,N′-tetramethylethylenediammonium tetrathiomolybdate

The title compounds 1,3-propanediammonium tetrathiomolybdate, (1,3-pnH₂)[MoS₄], 1 and, N,N,N′,N′-tetramethylethylenediammonium tetrathiomolybdate, (tmenH₂)[MoS₄], 2, were prepared by reacting the ammonium salt of [MoS₄]²⁻ with the corresponding organic diamine. In 1 and 2 the organic diamines 1,3-propanediamine (1,3-pn) and N,N,N′,N′-tetramethylethylenediamine (tmen) are present in their diprotonated form. The reaction of 1 or 2 with [Ni(en)₃]Cl₂ · 2H₂O (en is ethylenediamine) results in the formation of the highly insoluble complex tris(ethylenediamine)Ni(II) tetrathiomolybdate, [Ni(en)₃][MoS₄], in quantitative yields. 1 and 2 have been characterized by chemical analysis, vibrational, UV-Vis and NMR spectroscopy, TG-DTA-MS and single crystal X-ray crystallography. Compound 1 is thermally more stable compared to 2. Both complexes decompose in a single step forming amorphous molybdenum sulfide. The structure of the title complexes can be described as consisting of tetrahedral [MoS₄]²⁻ dianions which accept a complex series of H-bonds from the organic dications. The strength and number of these hydrogen bonds affect the Mo-S bond lengths.     

Retracted: Single layer molybdenum disulfide as an optical nanoprobe for 2 photon luminescence and second harmonic generation cell imaging

More recently, tremendous progress has been achieved in the development of two‐dimensional semiconductor materials applied in catalyst, energy application, sensor device and bioengineering since the birth of graphene isolated from graphite. Layered molybdenum disulfide (MoS₂) as an indirect gap semiconductor can efficiently emit photoluminescence (PL) excited by visible light, which shows a great potential in adaptive biological imaging. However, 1 photon PL of MoS₂ for cell imaging purposes suffers from strong autofluorescence and ion‐induced PL quenching. Herein, we report single layer small chitosan decorated MoS₂ nanosheets as a nonbleaching, nonblinking optical nanoprobe under near infrared femtosecond laser excitation and their applications for strong 2 photon luminescence (TPL) and strong second harmonic generation (SHG) bioimaging. Furthermore, the TPL can resist the ion‐induced quenching on the cellular membrane. The proposed TPL and SHG of single‐layer MoS₂ show great potential for real‐time, deep, multiphoton and three‐dimensional bioimaging under low‐power laser excitation.      

Few‐Layer MoS2 Flakes as Active Buffer Layer for Stable Perovskite Solar Cells

Solution‐processed few‐layer MoS₂ flakes are exploited as an active buffer layer in hybrid lead–halide perovskite solar cells (PSCs). Glass/FTO/compact‐TiO₂/mesoporous‐TiO₂/CH₃NH₃PbI₃/MoS₂/Spiro‐OMeTAD/Au solar cells are realized with the MoS₂ flakes having a twofold function, acting both as a protective layer, by preventing the formation of shunt contacts between the perovskite and the Au electrode, and as a hole transport layer from the perovskite to the Spiro‐OMeTAD. As prepared PSC demonstrates a power conversion efficiency (η) of 13.3%, along with a higher lifetime stability over 550 h with respect to reference PSC without MoS₂ (Δη/η = ?7% vs. Δη/η = ?34%). Large‐area PSCs (1.05 cm² active area) are also fabricated to demonstrate the scalability of this approach, achieving η of 11.5%. Our results pave the way toward the implementation of MoS₂ as a material able to boost the shelf life of large‐area perovskite solar cells in view of their commercialization.     

Photo/Electrochemical Applications of Metal Sulfide/TiO2 Heterostructures

Developing efficient and affordable catalysts is of great significance for energy and environmental sustainability. Heterostructure photocatalysts exhibit a better performance than either of the parent phases as it changes the band bending at the interfaces and provides a driving force for carrier separation, thus mitigating the effects of carrier recombination and back‐reaction. Herein, the photo/electrochemical applications of a variety of metal sulfides (MS_x) (MoS₂, CdS, CuS, PbS, SnS₂, ZnS, Ag₂S, Bi₂S₃, and In₂S₃)/TiO₂ heterojunctions are summarized, including organic degradation, water splitting, and CO₂ reduction conversion. First, a general introduction on each MS_x material (especially bandgap structures) will be given. Then the photo/electrochemical applications based on MS_x/TiO₂ heterostructures are reviewed from the perspective of light harvesting ability, charge carrier separation and transportation, and surface chemical reactions. Special focus is given to CdS/TiO₂ and PbS/TiO₂‐based quantum dot sensitized solar cells. Ternary composites by taking advantages of positive synergetic effects are also well summarized. Finally, conclusions are made regarding approaches for structure design, and the authors' perspective on future architectural design and electrode construction is given. This work will make up the gap for TiO₂ nanocomposites and shed light on the fabrication of more efficient MS_x‐metal oxide junctions in photo/electrochemical applications.     

Glucose biosensor based on the room-temperature phosphorescence of TiO2/SiO2 nanocomposite

The direct immobilization of glucose oxidase (GOD) on TiO₂/SiO₂ nanocomposite and its application as glucose biosensor were investigated. The room-temperature phosphorescence of TiO₂/SiO₂ nanocomposite can be quenched by hydrogen peroxide (H₂O₂). The detection of glucose may be accomplished by monitoring the formation of hydrogen peroxide which generated in the oxidation process of glucose with the catalysis of GOD. To our surprise, by using a 96-hole polyporous plate accessory of fluorescence spectrophotometer, the biosensor exhibits excellent linear response to glucose concentrations ranging from 1.0 × 10⁻⁹ to 1.0 × 10⁻² M with a detection limit of 1.2 × 10⁻¹⁰ M. The TiO₂/SiO₂ nanocomposite can be used as both supporting material and signal transducer. The phosphorescence intensity and color of the biosensor change obviously and even could be observed with naked eyes by continuous addition of glucose. Based on the room-temperature phosphorescence of TiO₂/SiO₂ nanocomposite, a new method of solid substrate-room-temperature phosphorimetry (SS-RTP) for glucose determination is proposed. A glucose biosensor was fabricated with wide determination concentration range, low detection limit, high sensitivity, and fast response time. And the biosensor has been successfully applied to the determination of glucose in human blood serum. The coacervation of GOD enzyme and its interaction with TiO₂/SiO₂ nanocomposite enlarge the surface area and enhance the chemical stability of GOD. The nice biocompatibility, large surface area, good chemical stability and nontoxicity of the TiO₂/SiO₂ nanocomposite have made this material suitable for functioning as biosensor.     

Artificial photosynthesis based on dye-sensitized nanocrystalline TiO2 solar cells

A new series of amphiphilic heteroleptic ruthenium(II) sensitizers [Ru(H₂dcbpy)(dhbpy)(NCS)₂] (C1), [Ru(H₂dcbpy)(bccbpy)(NCS)₂] (C2), [Ru(H₂dcbpy)(mpubpy)(NCS)₂] (C3), [Ru(H₂dcbpy)(bhcbpy)(NCS)₂] (C4) have been synthesized and fully characterized by UV-Vis, emission, NMR and cyclic voltammetric studies (where dhbpy = 4,4′-dihexyl-2,2′-bipyridine, bccbpy = 4,4′-bis(cholesteroxycarbonyl)-2,2′-bipyridine, mpubpy = 4-methyl-4′-perfluoro-1H,1H,2H,2H,3H,3H-undecyl-2,2′-bipyridine, bhcbpy = 4,4′-Bis(hexylcarboxamido)-2,2′-bipyridine). The amphiphilic amide heteroleptic ruthenium(II) sensitizers, self-assembled on TiO₂ surface from ethanol solution, reveal efficient sensitization in the visible window range yielding ≈80% incident photon-to-current efficiencies (IPCE). Under standard AM 1.5 sunlight, the C4 sensitizer gave 15 mA/cm² short circuit photocurrent density, 0.66 fill factor and an open circuit voltage of 0.75 V, corresponding to an overall conversion efficiency of 7.4%.     

The Improvement of Spinach Growth by Nano-anatase TiO<Subscript>2</Subscript> Treatment Is Related to Nitrogen Photoreduction

The improvement of spinach growth is proved to relate to N₂ fixation by nano-anatase TiO₂ in this study. The results show that all spinach leaves kept green by nano-anatase TiO₂ treatment and all old leaves of control turned yellow white under culture with N-deficient solution. And the fresh weight, dry weight, and contents of total nitrogen, , chlorophyll, and protein of spinach by nano-anatase TiO₂ treatment presented obvious enhancement compared with control. Whereas the improvements of yield of spinach were not as good as nano-anatase TiO₂ treatment under N-deficient condition, confirming that nano-anatase TiO₂ on exposure to sunlight could chemisorb N₂ directly or reduce N₂ to NH₃ in the spinach leaves, transforming into organic nitrogen and improving the growth of spinach. Bulk TiO₂ effect, however, was not as significant as nano-anatase TiO₂. A possible metabolism of the function of nano-anatase TiO₂ reducing N₂ to NH₃ was discussed.     

Bactericidal Performance of Visible-Light Responsive Titania Photocatalyst with Silver Nanostructures

Background

Titania dioxide (TiO₂) photocatalyst is primarily induced by ultraviolet light irradiation. Visible-light responsive anion-doped TiO₂ photocatalysts contain higher quantum efficiency under sunlight and can be used safely in indoor settings without exposing to biohazardous ultraviolet light. The antibacterial efficiency, however, remains to be further improved.

Methodology/Principal Findings

Using thermal reduction method, here we synthesized silver-nanostructures coated TiO₂ thin films that contain a high visible-light responsive antibacterial property. Among our tested titania substrates including TiO₂, carbon-doped TiO₂ [TiO₂ (C)] and nitrogen-doped TiO₂ [TiO₂ (N)], TiO₂ (N) showed the best performance after silver coating. The synergistic antibacterial effect results approximately 5 log reductions of surviving bacteria of Escherichia coli, Streptococcus pyogenes, Staphylococcus aureus and Acinetobacter baumannii. Scanning electron microscope analysis indicated that crystalline silver formed unique wire-like nanostructures on TiO₂ (N) substrates, while formed relatively straight and thicker rod-shaped precipitates on the other two titania materials.

Conclusion/Significance

Our results suggested that proper forms of silver on various titania materials could further influence the bactericidal property.     

H2‐Directing Strategy on In Situ Synthesis of Co‐MoS2 with Highly Expanded Interlayer for Elegant HER Activity and its Mechanism

MoS₂ has drawn great attention as a promising Pt‐substituting catalyst for the hydrogen evolution reaction (HER). This work utilizes H₂ as the structure directing agent (SDA) to in situ synthesize a range of Co‐MoS₂‐n (n = 0, 0.5, 1.0, 1.4, 2.0) with expanded interlayer spacings (d = 9.2 – 11.1 Å), which significantly boost their HER activities. The Co‐MoS₂‐1.4 with an interlayer spacing of 10.3 Å presents an extremely low overpotential of 56 mV (at 10 mA cm^?2) and a Tafel slope of 32 mV dec^?1, which is superior than most reported MoS₂‐based catalysts. Density function theory calculations are used to gain insights that i) the H₂ can be dissociatively adsorbed on MoS₂ and greatly affect the related surface free energy by regulating the interlayer spacing; ii) the expanded interlayer spacing can significantly decrease the absolute value of ΔG_H, thereby leading to greatly promoted HER activity. Additionally, the large amounts of 1T phase (73.9–79.2%) and Co‐Mo‐S active sites (40.9–91.3%) also contribute to the enhanced HER activity of the synthesized samples. Overall, a simple new strategy for in situ synthesis of Co‐MoS₂ with an expanded interlayer spacing is proposed, which sheds light on other 2D energy material designs.     

Surface Plasmon Resonance kinetic analysis of the interaction between G-quadruplex nucleic acids and an anti-G-quadruplex monoclonal antibody

Background

G-quadruplexes (G4s) are nucleic acids secondary structures formed in guanine-rich sequences. Anti-G4 antibodies represent a tool for the direct investigation of G4s in cells. Surface Plasmon Resonance (SPR) is a highly sensitive technology, suitable for assessing the affinity between biomolecules. We here aimed at improving the orientation of an anti-G4 antibody on the SPR sensor chip to optimize detection of binding antigens.

Rational Design of Core@shell Structured CoSx@Cu2MoS4 Hybridized MoS2/N,S‐Codoped Graphene as Advanced Electrocatalyst for Water Splitting and Zn‐Air Battery

A novel hybrid of small core@shell structured CoS_x@Cu₂MoS₄ uniformly hybridizing with a molybdenum dichalcogenide/N,S‐codoped graphene hetero‐network (CoS_x@Cu₂MoS₄‐MoS₂/NSG) is prepared by a facile route. It shows excellent performance toward the oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and hydrogen evolution reaction (HER) in alkaline medium. The hybrid exhibits rapid kinetics for ORR with high electron transfer number of ≈3.97 and exciting durability superior to commercial Pt/C. It also demonstrates great potential with remarkable stability for HER and OER, requiring low overpotential of 118.1 and 351.4 mV, respectively, to reach a current density of 10 mA cm^?2. An electrolyzer based on CoS_x@Cu₂MoS₄‐MoS₂/NSG produces low cell voltage of 1.60 V and long‐term stability, surpassing a device of Pt/C + RuO₂/C. In addition, a Zn‐air battery using cathodic CoS_x@Cu₂MoS₄‐MoS₂/NSG catalyst delivers a high cell voltage of ≈1.44 V and a power density of 40 mW cm^?2 at 58 mA cm^?2, better than the state‐of‐the‐art Pt/C catalyst. These achievements are due to the rational combination of highly active core@shell CoS_x@Cu₂MoS₄ with large‐area and high‐porosity MoS₂/NSG to produce unique physicochemical properties with multi‐integrated active centers and synergistic effects. The outperformances of such catalyst suggest an advanced candidate for multielectrocatalysis applications in metal‐air batteries and hydrogen production.     

Transition from Diffusion‐Controlled Intercalation into Extrinsically Pseudocapacitive Charge Storage of MoS2 by Nanoscale Heterostructuring

2D nanomaterials have been found to show surface‐dominant phenomena and understanding this behavior is crucial for establishing a relationship between a material's structure and its properties. Here, the transition of molybdenum disulfide (MoS₂) from a diffusion‐controlled intercalation to an emergent surface redox capacitive behavior is demonstrated. The ultrafast pseudocapacitive behavior of MoS₂ becomes more prominent when the layered MoS₂ is downscaled into nanometric sheets and hybridized with reduced graphene oxide (RGO). This extrinsic behavior of the 2D hybrid is promoted by the fast Faradaic charge‐transfer kinetics at the interface. The heterostructure of the 2D hybrid, as observed via high‐angle annular dark field–scanning transmission electron microscopy and Raman mapping, with a 1T MoS₂ phase at the interface and a 2H phase in the bulk is associated with the synergizing capacitive performance. This 1T phase is stabilized by the interactions with the RGO. These results provide fundamental insights into the surface effects of 2D hetero‐nanosheets on emergent electrochemical properties.     

Fast Li Storage in MoS2‐Graphene‐Carbon Nanotube Nanocomposites: Advantageous Functional Integration of 0D, 1D,and 2D Nanostructures

A 3D porous composite consisting of nano‐0D MoS₂, nano‐1D carbon nanotubes (CNTs), and nano‐2D graphene is successful prepared using an electrostatic spray deposition (ESD) technique. Depending on the preparation procedure either nanodots of amorphous MoS₂ (0.5–5 nm) or nanocrystalline few‐layered MoS₂ (5–10 nm) bonded to graphene‐carbon nanotubes backbone are obtained. These functionalized carbon nanotubes adhere to a porous graphene‐based network. Such composites can be directly ­deposited on the current collectors without any binder or conductive additives to assemble a battery that shows superior rate performance and cycling ­stability. For nanodots, nucleation and diffusion issues usually connected with ­conversion are largely mitigated if not totally nullified. The use of mechanically and diffusionally isolated but electrochemically well connected electroactive nanodots offer an effective solution to render conversion reaction reversible. The use of nano‐1D and nano‐2D carbon structures offer additional electrical and mechanical advantages that are discussed. Furthermore, this technique, which is easily extendable to other electrode materials, seems to be of a great potential, especially for thin‐film batteries, flexible batteries, and future ­paintable batteries.     

Vertically Oriented MoS2 with Spatially Controlled Geometry on Nitrogenous Graphene Sheets for High‐Performance Sodium‐Ion Batteries

Inspired by the great success of graphite in lithium‐ion batteries, anode materials that undergo an intercalation mechanism are considered to provide stable and reversible electrochemical sodium‐ion storage for sodium‐ion battery (SIB) applications. Though MoS₂ is a promising 2D material for SIBs, it suffers from deformation of its layered structure during repeated intercalation of Na⁺, resulting in undesirable electrochemical behaviors. In this study, vertically oriented MoS₂ on nitrogenous reduced graphene oxide sheets (VO‐MoS₂/N‐RGO) is presented with designed spatial geometries, including sheet density and height, which can deliver a remarkably high reversible capacity of 255 mA h g^?1 at a current density of 0.2 A g^?1 and 245 mA h g^?1 at a current density of 1 A g^?1, with a total fluctuation of 5.35% over 1300 cycles. These results are superior to those obtained with well‐developed hard carbon structures. Furthermore, a SIB full cell composed of the optimized VO‐MoS₂/N‐RGO anode and a Na₂V₃(PO₄)₃ cathode reaches a specific capacity of 262 mA h g^?1 (based on the anode mass) during 50 cycles, with an operated voltage range of 2.4 V, demonstrating the potentially rewarding SIB performance, which is useful for further battery development.