Cell specificity,anti-inflammatory activity,and plausible bactericidal mechanism of designed Trp-rich model antimicrobial peptides

To develop novel short Trp-rich antimicrobial peptides (AMPs) with potent cell specificity (targeting bacteria but not eukaryotic cells) and anti-inflammatory activity, a series of 11-meric Trp-rich model peptides with different ratios of Leu and Lys/Arg residues, XXWXXWXXWXX-NH₂ (X indicates Leu or Lys/Arg), was synthesized. K₆L₂W₃ displayed an approximately 40-fold increase in cell specificity, compared with the natural Trp-rich AMP indolicidin (IN). Lys-containing peptides (K₈W₃, K₇LW₃ and K₆L₂W₃) showed approximately 2- to 4-fold higher cell specificities than did their counterparts, the Arg-containing peptides (R₈W₃, R₇LW₃ and R₆L₂W₃), indicating that multiple Lys residues are more important than multiple Arg residues in the design of AMPs with good cell specificity. The excellent resistance of d-enantiomers (K₆L₂W₃-D and R₆L₂W₃-D) and Orn/Nle-containing peptides (O₆L₂W₃ and O₆L₂W₃) to trypsin digestion compared with the rapid breakdown of the l-enantiomers (K₆L₂W₃ and R₆L₂W₃), highlights the clinical potential of such peptides. K₆L₂W₃, R₆L₂W₃, K₆L₂W₃-D and R₆L₂W₃-D caused weak dye leakage from bacterial membrane-mimicking negatively charged EYPG/EYPE (7:3, v/v) liposomes. Confocal microscopy showed that these peptides penetrated the cell membrane of Escherichia coli and accumulated in the cytoplasm, as observed for buforin-2. Gel retardation studies revealed that the peptides bound more strongly to DNA than did IN. These results suggested that one possible peptide bactericidal mechanism may relate to the inhibition of intracellular functions via interference with DNA/RNA synthesis. Furthermore, some model peptides, containing K₆L₂W₃, K₅L₃W₃, R₆L₂W₃, O₆L₂W₃, O₆L₂W₃, and K₆L₂W₃-D inhibited LPS-induced inducible nitric oxide synthase (iNOS) mRNA expression, the release of nitric oxide (NO) following LPS stimulation in RAW264.7 cells and had powerful LPS binding activities at bactericidal concentrations. Collectively, our results indicated that these peptides have potential for future development as novel antimicrobial and anti-inflammatory agents.     

Enhanced catalytic site thermal stability of cold-adapted esterase EstK by a W208Y mutation

Hydrophobic interactions are known to play an important role for cold-adaptation of proteins; however, the role of amino acid residue, Trp, has not been systematically investigated. The extracellular esterase, EstK, which was isolated from the cold-adapted bacterium Pseudomonas mandelii, has 5 Trp residues. In this study, the effects of Trp mutation on thermal stability, catalytic activity, and conformational change of EstK were investigated. Among the 5 Trp residues, W²⁰⁸ was the most crucial in maintaining structural conformation and thermal stability of the enzyme. Surprisingly, mutation of W²⁰⁸ to Tyr (W²⁰⁸Y) showed an increased catalytic site thermal stability at ambient temperatures with a 13-fold increase in the activity at 40 °C compared to wild-type EstK. The structure model of W²⁰⁸Y suggested that Y²⁰⁸ could form a hydrogen bond with D³⁰⁸, which is located next to catalytic residue H³⁰⁷, stabilizing the catalytic domain. Interestingly, Tyr was conserved in the corresponding position of hyper-thermophilic esterases EstE1 and AFEST, which are active at high temperatures. Our study provides a novel insight into the engineering of the catalytic site of cold-adapted enzymes with increased thermal stability and catalytic activity at ambient temperatures.     

The effect of structural parameters and positive charge distance on the interaction free energy of antimicrobial peptides with membrane surface

Many attempts have been made to find hints explaining the relationship between physicochemical and structural properties of antimicrobial peptides (AMPs) which are relevant to their antimicrobial activities. We here found that there is a difference in the percentages of hydrophobic, hydrophilic, and charged residues between AMPs killing both bacteria and fungi (Group A) and AMPs that only kill bacteria (Group B). The percentage of charged residues in Group A AMPs is highly elevated, while in Group B the percentage of hydrophobic residues is increased. This result suggests a sequence-based mechanism of selectivity for AMPs. Moreover, we examined how the distance between basic residues affects the interaction free energy of AMPs with the membrane surface, since most of the known AMPs act by membrane perturbation. We measured the average distance between basic residues throughout the 3D structure of AMPs by defining D_pr parameter and calculated the interaction free energy for 10 AMPs that interacted with the DPPC membrane using molecular dynamics simulation. We found that the changes of the interaction free energy correlates with the change of D_pr by a linear regression coefficient of r^2?=?.47 and a cubic regression coefficient of r^2?=?.70.     

NMR structures and molecular dynamics simulation of hylin‐a1 peptide analogs interacting with micelles

Antimicrobial peptides are recognized candidates with pharmaceutical potential against epidemic emerging multi‐drug resistant bacteria. In this study, we use nuclear magnetic resonance spectroscopy and molecular dynamics simulations to determine the unknown structure and evaluate the interaction with dodecylphosphatidylcholine (DPC) and sodium dodecylsulphate (SDS) micelles with three W⁶‐Hylin‐a1 analogs antimicrobial peptides (HyAc, HyK, and HyD). The HyAc, HyK, and HyD bound to DPC micelles are all formed by a unique α‐helix structure. Moreover, all peptides reach the DPC micelles' core, which thus suggests that the N‐terminal modifications do not influence the interaction with zwiterionic surfaces. On the other hand, only HyAc and HyK peptides are able to penetrate the SDS micelle core while HyD remains always at its surface. The stability of the α‐helical structure, after peptide‐membrane interaction, can also be important to the second step of peptide insertion into the membrane hydrophobic core during permeabilization. Copyright © 2017 European Peptide Society and John Wiley & Sons, Ltd.     

Biosensor analysis of anti-citrullinated protein/peptide antibody affinity

Anti-citrullinated protein/peptide antibodies (ACPAs) are detected in rheumatoid arthritis (RA) sera and because of their strict association with the disease are considered marker antibodies, probably endowed with pathogenic potential. Antibody affinity is one of the parameters affecting pathogenicity. Three diagnostic citrullinated peptides—viral citrullinated peptide 1 (VCP1) and VCP2 derived from Epstein–Barr virus (EBV)-encoded proteins and histone citrullinated peptide 1 (HCP1) derived from histone H4—were synthesized as tetrameric multiple antigen peptides and immobilized on sensor chips CM5 type in a Biacore T100 instrument. Specific binding of purified antibodies from RA patients to the three peptides was analyzed by surface plasmon resonance using two arginine-containing sequences as controls. Employing a 1:1 binding model for affinity constant calculation, ACPAs interacted with VCP1 and VCP2 with lower apparent affinity (10⁻⁶ M > K_D > 10⁻⁷ M) and interacted with HCP1 with higher apparent affinity (K_D = 10⁻⁸ M). The results indicate that the binding to citrullinated peptides is characterized by wide differences in affinity, with slower association and faster dissociation rates in the case of antibodies to viral citrullinated peptides as compared with antibodies specific for the histone peptide. This biosensor analysis shows the high cross-reactivity of purified ACPAs that bind other citrullinated peptides besides the one used for purification.     

Membrane association and activity of 15/16-membered peptide antibiotics: Zervamicin IIB, ampullosporin A and antiamoebin I

Permeabilization of the phospholipid membrane, induced by the antibiotic peptides zervamicin IIB (ZER), ampullosporin A (AMP) and antiamoebin I (ANT) was investigated in a vesicular model system. Membrane-perturbing properties of these 15/16 residue peptides were examined by measuring the K⁺ transport across phosphatidyl choline (PC) membrane and by dissipation of the transmembrane potential. The membrane activities are found to decrease in the order ZER > AMP >> ANT, which correlates with the sequence of their binding affinities. To follow the insertion of the N-terminal Trp residue of ZER and AMP, the environmental sensitivity of its fluorescence was explored as well as the fluorescence quenching by water-soluble (iodide) and membrane-bound (5- and 16-doxyl stearic acids) quenchers. In contrast to AMP, the binding affinity of ZER as well as the depth of its Trp penetration is strongly influenced by the thickness of the membrane (diC_16:1PC, diC_18:1PC, C_16:0/C_18:1PC, diC_20:1PC). In thin membranes, ZER shows a higher tendency to transmembrane alignment. In thick membranes, the in-plane surface association of these peptaibols results in a deeper insertion of the Trp residue of AMP which is in agreement with model calculations on the localization of both peptide molecules at the hydrophilic-hydrophobic interface. The observed differences between the membrane affinities/activities of the studied peptaibols are discussed in relation to their hydrophobic and amphipathic properties.     

Structural studies of β-hairpin peptidomimetic antibiotics that target LptD in Pseudomonas sp.

We report structural studies in aqueous solution on backbone cyclic peptides that possess potent antimicrobial activity specifically against Pseudomonas sp. The peptides target the β-barrel outer membrane protein LptD, which plays an essential role in lipopolysaccharide transport to the outer membrane. The peptide L27-11 contains a 12-residue loop (T¹W²L³K⁴K⁵R⁶R⁷W⁸K⁹K¹⁰A¹¹K¹²) linked to a DPro–LPro template. Two related peptides were also studied, one with various Lys to ornithine or diaminobutyric acid substitutions as well as a DLys⁶ (called LB-01), and another containing the same loop sequence, but linked to an LPro–DPro template (called LB-02). NMR studies and MD simulations show that L27-11 and LB-01 adopt β-hairpin structures in solution. In contrast, LB-02 is more flexible and importantly, adopts a wide variety of different backbone conformations, but not β-hairpin conformations. L27-11 and LB-01 show antimicrobial activity in the nanomolar range against Pseudomonas aeruginosa, whereas LB-02 is essentially inactive. Thus the β-hairpin structure of the peptide is important for antimicrobial activity. An alanine scan of L27-11 revealed that tryptophan side chains (W²/W⁸) displayed on opposite faces of the β-hairpin represent key groups contributing to antimicrobial activity.     

Multiple tryptophan probes reveal that ubiquitin folds via a late misfolded intermediate

Much of our understanding of protein folding mechanisms is derived from experiments using intrinsic fluorescence of natural or genetically inserted tryptophan (Trp) residues to monitor protein refolding and site-directed mutagenesis to determine the energetic role of amino acids in the native (N), intermediate (I) or transition (T) states. However, this strategy has limited use to study complex folding reactions because a single fluorescence probe may not detect all low-energy folding intermediates. To overcome this limitation, we suggest that protein refolding should be monitored with different solvent-exposed Trp probes. Here, we demonstrate the utility of this approach by investigating the controversial folding mechanism of ubiquitin (Ub) using Trp probes located at residue positions 1, 28, 45, 57, and 66. We first show that these Trp are structurally sensitive and minimally perturbing fluorescent probes for monitoring folding/unfolding of the protein. Using a conventional stopped-flow instrument, we show that ANS and Trp fluorescence detect two distinct transitions during the refolding of all five Trp mutants at low concentrations of denaturant: T₁, a denaturant-dependent transition and T₂, a slower transition, largely denaturant-independent. Surprisingly, some Trp mutants (Ub^M1W, Ub^S57W) display Trp fluorescence changes during T₁ that are distinct from the expected U → N transition suggesting that the denaturant-dependent refolding transition of Ub is not a U → N transition but represents the formation of a structurally distinct I-state (U → I). Alternatively, this U → I transition could be also clearly distinguished by using a combination of two Trp mutations Ub^F45W-T66W for which the two Trp probes that display fluorescence changes of opposite sign during T₁ and T₂ (Ub^F45W-T66W). Global fitting of the folding/unfolding kinetic parameters and additional folding-unfolding double-jump experiments performed on Ub^M1W, a mutant with enhanced fluorescence in the I-state, demonstrate that the I-state is stable, compact, misfolded, and on-pathway. These results illustrate how transient low-energy I-states can be characterized efficiently in complex refolding reactions using multiple Trp probes.     

Structure, dynamics and mapping of membrane-binding residues of micelle-bound antimicrobial peptides by natural abundance C NMR spectroscopy

Worldwide bacterial resistance to traditional antibiotics has drawn much research attention to naturally occurring antimicrobial peptides (AMPs) owing to their potential as alternative antimicrobials. Structural studies of AMPs are essential for an in-depth understanding of their activity, mechanism of action, and in guiding peptide design. Two-dimensional solution proton NMR spectroscopy has been the major tool. In this article, we describe the applications of natural abundance ¹³C NMR spectroscopy that provides complementary information to 2D ¹H NMR. The correlation of ¹³Cα secondary shifts with both 3D structure and heteronuclear ¹⁵N NOE values indicates that natural abundance carbon chemical shifts are useful probes for backbone structure and dynamics of membrane peptides. Using human LL-37-derived peptides (GF-17, KR-12, and RI-10), as well as amphibian antimicrobial and anticancer peptide aurein 1.2 and its analog LLAA, as models, we show that the cross peak intensity plots of 2D ¹H-¹³Cα HSQC spectra versus residue number present a wave-like pattern (HSQC wave) where key hydrophobic residues of micelle-bound peptides are located in the troughs with weaker intensities, probably due to fast exchange between the free and bound forms. In all the cases, the identification of aromatic phenylalanines as a key membrane-binding residue is consistent with previous intermolecular Phe-lipid NOE observations. Furthermore, mutation of one of the key hydrophobic residues of KR-12 to Ala significantly reduced the antibacterial activity of the peptide mutants. These results illustrate that natural abundance heteronuclear-correlated NMR spectroscopy can be utilized to probe backbone structure and dynamics, and perhaps to map key membrane-binding residues of peptides in complex with micelles. ¹H-¹³Cα HSQC wave, along with other NMR waves such as dipolar wave and chemical shift wave, offers novel insights into peptide-membrane interactions from different angles.     

Tryptophan residue is essential for immunoreactivity of a diagnostically relevant peptide epitope of A. fumigatus

The role of tryptophan (Trp¹⁷) in immunoreactivity of P1, the diagnostically relevant peptide from a major allergen/antigen of Aspergillus fumigatus, was evaluated by chemically modifying tryptophanyl residue of P1. In BIAcore kinetic studies, unmodified P1 showed a 100-fold higher binding with ABPA (Allergic Bronchopulmonary Aspergillosis) patients’ IgG [K_D (equilibrium dissociation constant) = 2.74 e⁻⁸ ± 0.13 M] than the controls’ IgG (K_D = 2.97 e⁻⁶± 0.14 M), whereas chemically-modified P1 showed similar binding [K_D patients’ IgG = 3.25 e⁻⁷± 0.16 M, K_D controls’ IgG = 3.86 e⁻⁷± 0.19 M] indicating loss of specific immunoreactivity of P1 on tryptophan modification. Modified P1 showed loss of specific binding to IgE and IgG antibodies of ABPA patients in ELISA (Enzyme-Linked Immunosorbent Assay). The study infers that tryptophan residue (Trp¹⁷) is essential for immunoreactivity of P1.     

Complexation of peptide with Cu2+ responsible to inducing and enhancing the formation of α-helix conformation

Role of some metal ions on the conformations of peptides was examined by using a series of short alanine-based peptides with single Trp-His (W-H) interaction in different environments. Circular dichroism (CD), Trp (W) fluorescence emission, and Fourier transform infrared (FTIR) spectroscopy revealed that there is a conformational role of Cu²⁺ in inducing and enhancing the formation of -helix conformation. The complexation of the peptide with Cu²⁺ is responsible to the conformational effect because the chelation is able to stabilize peptide with an -helix conformation. The possible factors affecting the role of Cu²⁺ are discussed in the paper. The results in this paper are useful to understand the important structural role of Cu²⁺ in protein folding and the possible mechanism in some neurodegenerative diseases such as Alzheimer's disease.     

Tryptophan-containing milk protein-derived dipeptides inhibit xanthine oxidase

Of twelve dipeptides tested, only the Trp containing peptides Val-Trp and its reverse peptide Trp-Val showed a xanthine oxidase (XO) inhibitory activity. Studies with Val and Trp revealed that XO inhibition was mainly attributed to the Trp residue. No significant difference (P ≥ 0.05) was found for the XO inhibitory potency (IC₅₀) values for Trp, Val-Trp and Trp-Val, which were about 200 times higher than that for Allopurinol. Lineweaver and Burke analysis demonstrated that Trp, Val-Trp and Trp-Val were non-competitive inhibitors while Allopurinol was a competitive inhibitor. Of the different milk-protein substrates hydrolyzed with gastro-intestinal enzyme activities, only lactoferrin (LF) hydrolyzates displayed XO inhibition. Peptides present in a LF hydrolyzate (GLF-240 min) were adsorbed onto activated carbon followed by subsequent desorption with stepwise elution using acetonitrile (ACN). Separation and detection of Trp containing peptides within the different fractions were achieved using RP-HPLC coupled with fluorescence detection. The desorbed fractions displayed different XO inhibitory properties, with no inhibition in the unbound fraction and highest inhibition in fractions eluted with 30, 40 and 70% ACN. The fraction eluting at 40% ACN was significantly more potent (19.1 ± 2.3% inhibition at 1.25 mg mL⁻¹) than the GLF-240 min hydrolyzate (13.4 ± 0.4% inhibition at 1.25 mg mL⁻¹), showing the potential for enrichment of the bioactive peptides on fractionation with activated carbon.     

A novel modified peptide derived from membrane‐proximal external region of human immunodeficiency virus type 1 envelope significantly enhances retrovirus infection

Efficient gene transfer is a critical goal in retroviral transduction. Several peptides capable of forming amyloid fibrils, such as the 39‐residue semen‐derived infection‐enhancing peptide (SEVI), have demonstrated the ability to boost retroviral gene delivery. Here, a 13‐residue peptide P13 (Ac‐⁶⁷¹NWFDITNWLWYIK⁶⁸³) derived from the membrane‐proximal external region of the human immunodeficiency virus type 1 (HIV‐1) gp41 transmembrane protein, together with its 16‐residue peptide derivative (P16) were found to enhance HIV‐1 infection significantly. Both peptides, P13 and P16, could form amyloid fibril structures to potently enhance HIV‐1 infectivity. Further investigations showed that both aromatic Trp residues and cationic Lys residues contributed to the enhancement of HIV‐1 infection by these two active peptides. P16 could more effectively augment HIV‐1 YU‐2 infection than SEVI, implying its potential applications as a tool in the lab to improve gene transfer rates. Copyright © 2013 European Peptide Society and John Wiley & Sons, Ltd.     

Binding,folding and insertion of a β-hairpin peptide at a lipid bilayer surface: Influence of electrostatics and lipid tail packing

Antimicrobial peptides (AMPs) act as host defenses against microbial pathogens. Here we investigate the interactions of SVS-1 (KVKVKVKV^dP^lPTKVKVKVK), an engineered AMP and anti-cancer β-hairpin peptide, with lipid bilayers using spectroscopic studies and atomistic molecular dynamics simulations. In agreement with literature reports, simulation and experiment show preferential binding of SVS-1 peptides to anionic over neutral bilayers. Fluorescence and circular dichroism studies of a Trp-substituted SVS-1 analogue indicate, however, that it will bind to a zwitterionic DPPC bilayer under high-curvature conditions and folds into a hairpin. In bilayers formed from a 1:1 mixture of DPPC and anionic DPPG lipids, curvature and lipid fluidity are also observed to promote deeper insertion of the fluorescent peptide. Simulations using the CHARMM C36m force field offer complementary insight into timescales and mechanisms of folding and insertion. SVS-1 simulated at an anionic mixed POPC/POPG bilayer folded into a hairpin over a microsecond, the final stage in folding coinciding with the establishment of contact between the peptide's valine sidechains and the lipid tails through a “flip and dip” mechanism. Partial, transient folding and superficial bilayer contact are seen in simulation of the peptide at a zwitterionic POPC bilayer. Only when external surface tension is applied does the peptide establish lasting contact with the POPC bilayer. Our findings reveal the influence of disruption to lipid headgroup packing (via curvature or surface tension) on the pathway of binding and insertion, highlighting the collaborative effort of electrostatic and hydrophobic interactions on interaction of SVS-1 with lipid bilayers.     

EcDBS1R6: A novel cationic antimicrobial peptide derived from a signal peptide sequence

BackgroundBacterial infections represent a major worldwide health problem the antimicrobial peptides (AMPs) have been considered as potential alternative agents for treating these infections. Here we demonstrated the antimicrobial activity of EcDBS1R6, a peptide derived from a signal peptide sequence of Escherichia coli that we previously turned into an AMP by making changes through the Joker algorithm.MethodsAntimicrobial activity was measured by broth microdilution method. Membrane integrity was measured using fluorescent probes and through scanning electron microscopy imaging. A sliding window of truncated peptides was used to determine the EcDBS1R6 active core. Molecular dynamics in TFE/water environment was used to assess the EcDBS1R6 structure.ResultsSignal peptides are known to naturally interact with membranes; however, the modifications introduced by Joker transformed this peptide into a membrane-active agent capable of killing bacteria. The C-terminus was unable to fold into an α-helix whereas its fragments showed poor or no antimicrobial activity, suggesting that the EcDBS1R6 antibacterial core was located at the helical N-terminus, corresponding to the signal peptide portion of the parent peptide.ConclusionThe strategy of transforming signal peptides into AMPs appears to be promising and could be used to produce novel antimicrobial agents.General significanceThe process of transforming an inactive signal peptide into an antimicrobial peptide could open a new venue for creating new AMPs derived from signal peptides.     

Biochemical analysis of an MHC-linked hematopoietic cell surface antigen,Qa-2

The region of the murine 17th chromosome telomeric to H-2D encodes a group of serologically defined cell surface antigens termed Qa-1-5. These antigens are of interest because their expression is restricted to hematopoietic cells. In addition, the molecular weight and subunit structure (ie, association with β-2 microglobulin) of Qa-2 molecules are similar to H-2 and TL antigens. In the present studies, we have prepared isotopically labeled Qa-2 and H-2 molecules from mitogen-stimulated C57BL/6 spleen cells. Comparative peptide mapping of tryptic peptides from Qa-2 and H-2 molecules (K^b, D^bK^k, D^d) reveal that Qa-2 has a unique primary structure. However, considerable homology is indicated since 30–40% of the Qa-2 peptides cochromatograph with peptides derived from H-2K^b, H-2D^b, H-2K^k, and H-2D^d. Studies by other investigators have demonstrated that similar levels of structural homology are observed when H-2K, H-2D, and H-2L tryptic peptides are analyzed. We conclude from these studies that the Qa-2 alloantigen is structurally related to a class of cell surface molecules (ie, H-2) that play critical roles in immune recognition processes. These data further suggest that the genes encoding Qa-2 and H-2 molecules have arisen from a common primordial gene.     

Structural and thermodynamic analyses of the interaction between melittin and lipopolysaccharide

Lipopolysaccharide (LPS), the major constituent of the outer membrane of Gram-negative bacteria, is the very first site of interactions with the antimicrobial peptides. In this work, we have determined a solution conformation of melittin, a well-known membrane active amphiphilic peptide from honey bee venom, by transferred nuclear Overhauser effect (Tr-NOE) spectroscopy in its bound state with lipopolysaccharide. The LPS bound conformation of melittin is characterized by a helical structure restricted only to the C-terminus region (residues A15-R24) of the molecule. Saturation transfer difference (STD) NMR studies reveal that several C-terminal residues of melittin including Trp19 are in close proximity with LPS. Isothermal titration calorimetry (ITC) data demonstrates that melittin binding to LPS or lipid A is an endothermic process. The interaction between melittin and lipid A is further characterized by an equilibrium association constant (K_a) of 2.85 × 10⁶ M^− 1 and a stoichiometry of 0.80, melittin/lipid A. The estimated free energy of binding (ΔG⁰), − 8.8 kcal mol^− 1, obtained from ITC experiments correlates well with a partial helical structure of melittin in complex with LPS. Moreover, a synthetic peptide fragment, residues L13-Q26 or mel-C, derived from the C-terminus of melittin has been found to contain comparable outer membrane permeabilizing activity against Escherichia coli cells. Intrinsic tryptophan fluorescence experiments of melittin and mel-C demonstrate very similar emission maxima and quenching in presence of LPS micelles. The Red Edge Excitation Shift (REES) studies of tryptophan residue indicate that both peptides are located in very similar environment in complex with LPS. Collectively, these results suggest that a helical conformation of melittin, at its C-terminus, could be an important element in recognition of LPS in the outer membrane.     

Designing the antimicrobial peptide with centrosymmetric and amphipathic characterizations for improving antimicrobial activity

Antibiotic-resistant bacterial infections are becoming a serious health issue and will cause 10 million deaths per year by 2050. As a result, the development of new antimicrobial agents is urgently needed. Antimicrobial peptides (AMPs) are found in the innate immune systems of various organisms to effectively fend off invading pathogens. In this study, we designed a series of AMPs (THL-2-1 to THL-2-9) with centrosymmetric and amphipathic properties, through substituting different amino acids on the hydrophobic side and at the centrosymmetric position to improve their antimicrobial activity. The results showed that leucine as a residue on the hydrophobic side of the peptide could enhance its antimicrobial activity and that glutamic acid as a centrosymmetric residue could increase the salt resistance of the peptide. Thus, the THL-2-3 peptide (KRLLRELKRLL-NH₂) showed the greatest antimicrobial activity (MIC₉₀ of 16 μM) against Gram-negative bacteria and had the highest salt resistance and cell selectivity among all the designed peptides. In summary, the results of this study provide useful references for the design of AMPs to enhance antimicrobial activity.