Site-directed mutagenesis of an alkaline phytase: influencing specificity, activity and stability in acidic milieu

Site-directed mutagenesis of a thermostable alkaline phytase from Bacillus sp. MD2 was performed with an aim to increase its specific activity and activity and stability in an acidic environment. The mutation sites are distributed on the catalytic surface of the enzyme (P257R, E180N, E229V and S283R) and in the active site (K77R, K179R and E227S). Selection of the residues was based on the idea that acid active phytases are more positively charged around their catalytic surfaces. Thus, a decrease in the content of negatively charged residues or an increase in the positive charges in the catalytic region of an alkaline phytase was assumed to influence the enzyme activity and stability at low pH. Moreover, widening of the substrate-binding pocket is expected to improve the hydrolysis of substrates that are not efficiently hydrolysed by wild type alkaline phytase. Analysis of the phytase variants revealed that E229V and S283R mutants increased the specific activity by about 19% and 13%, respectively. Mutation of the active site residues K77R and K179R led to severe reduction in the specific activity of the enzyme. Analysis of the phytase mutant-phytate complexes revealed increase in hydrogen bonding between the enzyme and the substrate, which might retard the release of the product, resulting in decreased activity. On the other hand, the double mutant (K77R-K179R) phytase showed higher stability at low pH (pH 2.6-3.0). The E227S variant was optimally active at pH 5.5 (in contrast to the wild type enzyme that had an optimum pH of 6) and it exhibited higher stability in acidic condition. This mutant phytase, displayed over 80% of its initial activity after 3 h incubation at pH 2.6 while the wild type phytase retained only about 40% of its original activity. Moreover, the relative activity of this mutant phytase on calcium phytate, sodium pyrophosphate and p-nitro phenyl phosphate was higher than that of the wild type phytase.     

The crystal structure of an oxidatively stable subtilisin-like alkaline serine protease, KP-43, with a C-terminal beta-barrel domain

The crystal structure of an oxidatively stable subtilisin-like alkaline serine protease, KP-43 from Bacillus sp. KSM-KP43, with a C-terminal extension domain, was determined by the multiple isomorphous replacements method with anomalous scattering. The native form was refined to a crystallographic R factor of 0.134 (Rfree of 0.169) at 1.30-A resolution. KP-43 consists of two domains, a subtilisin-like alpha/beta domain and a C-terminal jelly roll beta-barrel domain. The topological architecture of the molecule is similar to that of kexin and furin, which belong to the subtilisin-like proprotein convertases, whereas the amino acid sequence and the binding orientation of the C-terminal beta-barrel domain both differ in each case. Since the C-terminal domains of subtilisin-like proprotein convertases are essential for folding themselves, the domain of KP-43 is also thought to play such a role. KP-43 is known to be an oxidation-resistant protease among the general subtilisin-like proteases. To investigate how KP-43 resists oxidizing reagents, the structure of oxidized KP-43 was also determined and refined to a crystallographic R factor of 0.142 (Rfree of 0.212) at 1.73-A resolution. The structure analysis revealed that Met-256, adjacent to catalytic Ser-255, was oxidized similarly to an equivalent residue in subtilisin BPN'. Although KP-43, as well as proteinase K and subtilisin Carlsberg, lose their hydrolyzing activity against synthetic peptides after oxidation treatment, all of them retain 70-80% activity against proteinaceous substrates. These results, as well as the beta-casein digestion pattern analysis, have indicated that the oxidation of the methionine adjacent to the catalytic serine is not a dominant modification but might alter the substrate specificities.     

A single mutation within a Ca binding loop increases proteolytic activity,thermal stability,and surfactant stability

We improved the enzymatic properties of the oxidatively stable alkaline serine protease KP-43 through protein engineering to make it more suitable for use in laundry detergents. To enhance proteolytic activity, the gene encoding KP-43 was mutagenized by error-prone PCR. Screening identified a Tyr195Cys mutant enzyme that exhibited increased specific activity toward casein between pH 7 and 11. At pH 10, the mutant displayed 1.3-fold higher specific activity for casein compared to the wild-type enzyme, but the activity of the mutant was essentially unchanged toward several synthetic peptides. Furthermore, the Tyr195Cys mutation significantly increased thermal stability and surfactant stability of the enzyme under oxidizing conditions. Examination of the crystal structure of KP-43 revealed that Tyr195 is a solvent exposed residue that forms part of a flexible loop that binds a Ca^2 + ion. This residue lies 15–20 Å away from the residues comprising the catalytic triad of the enzyme. These results suggest that the substitution at position 195 does not alter the structure of the active center, but instead may affect a substrate–enzyme interaction. We propose that the Tyr195Cys mutation enhances the interaction with Ca^2 + and affects the packing of the Ca^2 + binding loop, consequently increasing protein stability. The simultaneously increased proteolytic activity, thermal stability, and surfactant stability of the Tyr195Cys mutant enzyme make the protein an ideal candidate for laundry detergent application.     

Comparative studies on soluble and immobilized yeast hexokinase

Comparative studies have been carried out on soluble and immobilized yeast hexokinase (ATP: D-hexose 6-phosphotransferase, EC 2.7.1.1). The enzyme was immobilized by covalent attachment to a polyacrylamide type support containing carboxylic functional groups. The effects of immobilization on the catalytic properties and stability of hexokinase were studied. As a result of immobilization, the pH optimum for catalytic activity was shifted in the alkaline direction to ～pH 9.7. The apparent optimum temperature of the immobilized enzyme was higher than that of the soluble enzyme. The apparent K_m value with D-glucose as substrate increased, while that with ATP as substrate decreased, compared with the data for the soluble enzyme. Differences were found in the thermal inactivation processes and stabilities of the soluble and immobilized enzymes. The resistance to urea of the soluble enzyme was higher at alkaline pH values, while that for the immobilized enzyme was greatest at ～pH 6.0.     

High secretory production of an alkaliphilic actinomycete xylanase and functional roles of some important residues

Using native signal peptide, an alkaliphilic actinomycete xylanase XynK was overexpressed in Escherichia coli and secreted into the culture medium completely. At its optimum catalytic temperature of 55 °C, the cellulose-free xylanase exhibits high activity and stability at pH 7.0–11.0. In comparison with the well-studied actinomycete xylanase from Streptomyces lividans, as an alkaliphilic xylanase, XynK exhibited different biochemical and catalytic characteristics. With the aid of site-directed mutagenesis, some residues were demonstrated to be important to the activity, stability, or substrate binding of the enzyme. The pH stability of mutants H131S and W135A both decreased obviously under high pH values. Combined with their K _m parameters and homology model analysis, His131 was proposed to be important to both substrate binding and enzyme catalyzing, whereas Trp135 significantly influenced enzyme stability. Good stability under alkaline condition, as well as high secretory expression implies good potentials of the alkaline xylanase in various industrial applications. In addition, results from site-directed mutagenesis provide useful information for further pH stability mechanisms investigation.     

On the nucleotide binding domain of fructose-1,6-bisphosphatase.

Native chicken liver fructose-1,6-bisphosphatase (Fru-P₂ase) can bind to blue dextranSepharose affinity column and is not displaced by its sugar-phosphate substrate; however; it is readily eluted by the inhibitor 5′-AMP. Treatment of Fru-P₂ase with pyridoxal 5′-phosphate (pyridoxal-P) in the presence of the substrate, fructose 1,6-bisphosphate, followed by reduction with NaBH₄ leads to the formation of active pyridoxal-P derivatives of the enzyme showing diminished sensitivity to AMP inhibitor. The modified enzyme does not bind to the affinity column. On the other hand, in the presence of AMP modification of Fru-P₂ase with pyridoxal-P occurs at the catalytic site; this modification does not alter its binding behavior toward the dye ligand. Blue dextran can also protect Fru-P₂ase against AMP inhibition, and it is a competitive desensitizer for the nucleotide ligand. The results establish that blue dextran binds specifically to the allosteric site of the enzyme, and that the structure of this site may resemble that of the dinucleotide fold in other enzymes. Like native Fru-P₂ase, digestion of pyridoxal-P-Fru-P₂ase (with regulatory properties altered) with subtilisin causes a severalfold increase in the catalytic activity measured at pH 9.2, without significant change in the activity at pH 7.5, and produces a peptide with 56 amino acids. The residual subunit, M_r ~ 30,000, was found to contain all of the incorporated pyridoxal-P.     

Two Oxidation Sites for Low Redox Potential Substrates: A DIRECTED MUTAGENESIS,KINETIC, AND CRYSTALLOGRAPHIC STUDY ON PLEUROTUS ERYNGII VERSATILE PEROXIDASE*

Versatile peroxidase shares with manganese peroxidase and lignin peroxidase the ability to oxidize Mn²⁺ and high redox potential aromatic compounds, respectively. Moreover, it is also able to oxidize phenols (and low redox potential dyes) at two catalytic sites, as shown by biphasic kinetics. A high efficiency site (with 2,6-dimethoxyphenol and p-hydroquinone catalytic efficiencies of ∼70 and ∼700 s⁻¹ mm⁻¹, respectively) was localized at the same exposed Trp-164 responsible for high redox potential substrate oxidation (as shown by activity loss in the W164S variant). The second site, characterized by low catalytic efficiency (∼3 and ∼50 s⁻¹ mm⁻¹ for 2,6-dimethoxyphenol and p-hydroquinone, respectively) was localized at the main heme access channel. Steady-state and transient-state kinetics for oxidation of phenols and dyes at the latter site were improved when side chains of residues forming the heme channel edge were removed in single and multiple variants. Among them, the E140G/K176G, E140G/P141G/K176G, and E140G/W164S/K176G variants attained catalytic efficiencies for oxidation of 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonate) at the heme channel similar to those of the exposed tryptophan site. The heme channel enlargement shown by x-ray diffraction of the E140G, P141G, K176G, and E140G/K176G variants would allow a better substrate accommodation near the heme, as revealed by the up to 26-fold lower K_m values (compared with native VP). The resulting interactions were shown by the x-ray structure of the E140G-guaiacol complex, which includes two H-bonds of the substrate with Arg-43 and Pro-139 in the distal heme pocket (at the end of the heme channel) and several hydrophobic interactions with other residues and the heme cofactor.     

Enhancement of the activity and alkaline pH stability of <Emphasis Type="Italic">Thermobifida fusca</Emphasis> xylanase A by directed evolution

Directed evolution has been used to enhance the catalytic activity and alkaline pH stability of Thermobifida fusca xylanase A, which is one of the most thermostable xylanases. Under triple screened traits of activity, alkaline pH stability and thermostability, through two rounds of random mutagenesis using DNA shuffling, a mutant 2TfxA98 with approximately 12-fold increased k _cat/K _m and 4.5-fold decreased K _m compared with its parent was obtained. Moreover, the alkaline pH stability of 2TfxA98 is increased significantly, with a thermostability slightly lower than that of its parent. Five amino acid substitutions (T21A, G25P, V87P, I91T, and G217L), three of them are near the catalytic active site, were identified by sequencing the genes encoding this evolved enzyme. The activity and stabilizing effects of each amino acid mutation in the evolved enzyme were evaluated by site-directed mutagenesis. This study shows a useful approach to improve the catalytic activity and alkaline pH stability of T. fusca xylanase A toward the hydrolysis of xylan.     

Characterization and Engineering of a Novel Pyrroloquinoline Quinone Dependent Glucose Dehydrogenase from <Emphasis Type="Italic">Sorangium cellulosum</Emphasis> So ce56

A novel pyrroloquinoline quinone dependent glucose dehydrogenase like enzyme (PQQ GDH) was isolated from Sorangium cellulosum So ce56. The putative coding region was cloned, over expressed in E. coli and the resulting enzyme was characterized. The recombinant protein has a relative molecular mass of 63 kDa and shows 43% homology to PQQ GDH-B from Acinetobacter calcoaceticus. In the presence of PQQ and CaCl₂ the enzyme has dehydrogenase activity with the substrate glucose as well as with other mono- and disaccharides. The thermal stability and its pH activity profile mark the enzyme as a potential glucose biosensor enzyme. In order to decrease the activity on maltose, which is unwanted for a potential application in biosensors, the protein was rationally modified at three specified positions. The best variant showed a 59% reduction in activity on maltose compared to the wild type enzyme. The catalytic efficiency (k _cat/K _M) was reduced fivefold but the specific activity still amounted to 63% of the wild type activity.     

Properties of 5′-nucleotidase from nodules of pigeonpea (Cajanus cajan)

5′-Nucleotidase from pigeonpea nodules has been resolved into two forms, N-I and N-II, having M,s of 52 000 and 119 000, respectively. Both forms had pH optima in the acidic range (between pH 5.2 and 5.7) with either CMP, GMP, XMP, IMP or AMP as the substrate. Up to pH 6.6, both forms showed higher activity with CMP followed by GMP, XMP, IMP and AMP, respectively. However, the activity changed with pH in the alkaline range making the enzyme relatively more active with purine nucleotides. Neither of the forms had a requirement for any of the metal ions tested. Fe³⁺ inhibited the enzyme activity; the inhibition at 5, 10 and 15 mM concentrations being 11, 43 and 47%, respectively with N-I and 14,47 and 52%, respectively with N-II. K_m values for AMP, IMP, GMP, CMP and XMP were 0.10, 0.18, 0.40, 0.40 and 0.77 mM, respectively with N-I and 0.12, 0.20, 0.40, 0.40 and 0.99 mM, respectively with N-II. The enzyme was inhibited non-competitively by adenosine and inosine; K_i values being 1.78, 0.25 and 0.30; 3.50, 2.12 and 0.75 mM, respectively with AMP, IMP and XMP as the substrate.     

The role of asparagine-linked glycosylation site on the catalytic domain of matriptase in its zymogen activation

Matriptase is a type II transmembrane serine protease containing one potential site for asparagine-linked glycosylation (N-glycosylation) on the catalytic domain (Asn772). It has been found that the activation of matriptase zymogen occurs via a mechanism requiring its own activity and that the N-glycosylation site is critical for the activation. The present study aimed to determine the underlying reasons for the site requirement using Madin–Darby canine kidney cells stably expressing recombinant variants of rat matriptase. A full-length variant with glutamine substitution at Asn772 appeared to be unable to undergo activation because of its catalytic incompetence (i.e., decreased availability of the soluble catalytic domain and/or of the correctly folded domain). This was evidenced by the observations that (i) a recombinant catalytic domain of matriptase with glutamine substitution at the site corresponding to matriptase Asn772 [N772Q-CD-Myc(His)₆] was not detected in the medium conditioned by transfected cells but was on the cell surface and (ii) purified N772Q-CD-Myc(His)₆ exhibited markedly reduced activity toward a peptide substrate. It is concluded that N-glycosylation site at Asn772 of matriptase is required for the zymogen activation because it plays an important role in rendering this protease catalytically competent in the cellular environment.     

Allosteric behavior of platelet myosin.

The allosteric properties of platelet actomyosin and myosin have been further studied. At pH 7.2, both exhibit sigmoid kinetics with at least two interacting ATP binding sites. At pH 8.9, the velocity versus substrate curve is shifted to the right and becomes more sigmoidal. In contrast, at pH 5.5, the enzyme appears to follow hyperbolic kinetics and the K_m is reduced. In the presence of 1.4 m urea, the sigmoidicity is lost and the enzyme obeys Michaelis-Menten kinetics. The effect of ADP on the ATPase activity was also investigated. ADP shows characteristics of a competitive inhibitor; it increases K_m (shifts sigmoid curve to the right) without affecting V. When the enzyme is desensitized by low pH (5.5) or urea (1.4 m), the allosteric interaction is abolished without impairing the catalytic activity and ADP is no longer inhibitory. These findings suggest that platelet myosin possesses two interacting sites and that ADP binds to the allosteric site which appears to be different from the catalytic site.     

Investigation of catalysis by bacterial RNase P via LNA and other modifications at the scissile phosphodiester

We analyzed cleavage of precursor tRNAs with an LNA, 2′-OCH₃, 2′-H or 2′-F modification at the canonical (c₀) site by bacterial RNase P. We infer that the major function of the 2′-substituent at nt −1 during substrate ground state binding is to accept an H-bond. Cleavage of the LNA substrate at the c₀ site by Escherichia coli RNase P RNA demonstrated that the transition state for cleavage can in principle be achieved with a locked C3′ -endo ribose and without the H-bond donor function of the 2′-substituent. LNA and 2′-OCH₃ suppressed processing at the major aberrant m₋₁ site; instead, the m₊₁ (nt +1/+2) site was utilized. For the LNA variant, parallel pathways leading to cleavage at the c₀ and m₊₁ sites had different pH profiles, with a higher Mg²⁺ requirement for c₀ versus m₊₁ cleavage. The strong catalytic defect for LNA and 2′-OCH₃ supports a model where the extra methylene (LNA) or methyl group (2′-OCH₃) causes a steric interference with a nearby bound catalytic Mg²⁺ during its recoordination on the way to the transition state for cleavage. The presence of the protein cofactor suppressed the ground state binding defects, but not the catalytic defects.     

Structural and biochemical characterization of the broad substrate specificity of Bacteroides thetaiotaomicron commensal sialidase

Sialidases release the terminal sialic acid residue from a wide range of sialic acid-containing polysaccharides. Bacteroides thetaiotaomicron, a symbiotic commensal microbe, resides in and dominates the human intestinal tract. We characterized the recombinant sialidase from B. thetaiotaomicron (BTSA) and demonstrated that it has broad substrate specificity with a relative activity of 97, 100 and 64 for 2,3-, 2,6- and 2,8-linked sialic substrates, respectively. The hydrolysis activity of BTSA was inhibited by a transition state analogue, 2-deoxy-2,3-dehydro-N-acetyl neuraminic acid, by competitive inhibition with a K_i value of 35 μM. The structure of BSTA was determined at a resolution of 2.3 Å. This structure exhibited a unique carbohydrate-binding domain (CBM) at its N-terminus (a.a. 23–190) that is adjacent to the catalytic domain (a.a. 191–535). The catalytic domain has a conserved arginine triad with a wide-open entrance for the substrate that exposes the catalytic residue to the surface. Unlike other pathogenic sialidases, the polysaccharide-binding site in the CBM is near the active site and possibly holds and positions the polysaccharide substrate directly at the active site. The structural feature of a wide substrate-binding groove and closer proximity of the polysaccharide-binding site to the active site could be a unique signature of the commensal sialidase BTSA and provide a molecular basis for its pharmaceutical application.     

pH Effects on the Activity and Regulation of the NAD Malic Enzyme

The NAD malic enzyme shows a pH optimum of 6.7 when complexed to Mg²⁺ and NAD⁺ but shifts to 7.0 when the catalytically competent enzyme-substrate (E-S) complex forms upon binding malate⁻². This is characteristic of an induced conformational change. The slope of the V_max or V_max/K_m profiles is steeper on the alkaline side of the pH optimum. The K_m for malate increases markedly under alkaline conditions but is not greatly affected by pH values below the optimum. The loss of catalysis on the acidic side is due to protonation of a single residue, pK 5.9, most likely histidine. Photooxidation inactivation with methylene blue showed that a histidine is required for catalytic activity. The location of this residue at or near the active site is revealed by the protection against inactivation offered by malate. Three residues, excluding basic residues such as lysine (which have also been shown to be vital for catalytic activity, must be appropriately ionized for malate decarboxylation to proceed optimally. Two of these residues directly participate in the binding of substrates and are essential for the decarboxylation of malate. A pK of 7.6 was determined for the two residues required by the E-S complex to achieve an active state, this composite value representing both histidine and cysteine suggests that both have decisive roles in the operation of the enzyme. A major change in the enzyme takes place as protonation nears the pH optimum, this is recorded as a change in the enzyme's intrinsic affinity for malate (K_{m pH6.7} = 9.2 millimolar, K_{m pH7.7} = 28.3 millimolar). Similar changes in K_m have been observed for the NAD malic enzyme as it shifts from dimer to tetramer. It is most likely that the third ionizable group (probably a cysteine) revealed by the V_max/K_m profile is needed for optimal activity and is involved in the association-dissociation behavior of the enzyme.     

The non-equivalence of the active sites and the mechanism of a mutationally altered E. coli alkaline phosphatase.

The activated form of the U-47 mutant of $\text{E. coli}$ alkaline phosphatase is a dimer with 4g atoms of zinc per mole. Its specific activity is only two-tenths that of the wild type enzyme. Analysis of the catalytic action by transient kinetics and quenching experiments shows that only one site per dimer (half-site reactivity) can be phosphorylated by substrates and ³²P_i at acidic pH and by substrates at alkaline pH. The rate constants of the phosphorylation (k₂) and of the dephosphorylation (k₃) of the active site are drastically changed by the mutation. The pH dependence of k₂ and k₃ is reported.     

The Reductive Half-reaction of Xanthine Dehydrogenase from Rhodobacter capsulatus: THE ROLE OF GLU232 IN CATALYSIS*

The kinetic properties of an E232Q variant of the xanthine dehydrogenase from Rhodobacter capsulatus have been examined to ascertain whether Glu²³² in wild-type enzyme is protonated or unprotonated in the course of catalysis at neutral pH. We find that k_red, the limiting rate constant for reduction at high [xanthine], is significantly compromised in the variant, a result that is inconsistent with Glu²³² being neutral in the active site of the wild-type enzyme. A comparison of the pH dependence of both k_red and k_red/K_d from reductive half-reaction experiments between wild-type and enzyme and the E232Q variant suggests that the ionized Glu²³² of wild-type enzyme plays an important role in catalysis by discriminating against the monoanionic form of substrate, effectively increasing the pK_a of substrate by two pH units and ensuring that at physiological pH the neutral form of substrate predominates in the Michaelis complex. A kinetic isotope study of the wild-type R. capsulatus enzyme indicates that, as previously determined for the bovine and chicken enzymes, product release is principally rate-limiting in catalysis. The disparity in rate constants for the chemical step of the reaction and product release, however, is not as great in the bacterial enzyme as compared with the vertebrate forms. The results indicate that the bacterial and bovine enzymes catalyze the chemical step of the reaction to the same degree and that the faster turnover observed with the bacterial enzyme is due to a faster rate constant for product release than is seen with the vertebrate enzyme.     

New Insights into the Role of T3 Loop in Determining Catalytic Efficiency of GH28 Endo-Polygalacturonases

Intramolecular mobility and conformational changes of flexible loops have important roles in the structural and functional integrity of proteins. The Achaetomium sp. Xz8 endo-polygalacturonase (PG8fn) of glycoside hydrolase (GH) family 28 is distinguished for its high catalytic activity (28,000 U/mg). Structure modeling indicated that PG8fn has a flexible T3 loop that folds partly above the substrate in the active site, and forms a hydrogen bond to the substrate by a highly conserved residue Asn94 in the active site cleft. Our research investigates the catalytic roles of Asn94 in T3 loop which is located above the catalytic residues on one side of the substrate. Molecular dynamics simulation performed on the mutant N94A revealed the loss of the hydrogen bond formed by the hydroxyl group at O34 of pentagalacturonic acid and the crucial ND2 of Asn94 and the consequent detachment and rotation of the substrate away from the active site, and that on N94Q caused the substrate to drift away from its place due to the longer side chain. In line with the simulations, site-directed mutagenesis at this site showed that this position is very sensitive to amino acid substitutions. Except for the altered K _m values from 0.32 (wild type PG8fn) to 0.75–4.74 mg/ml, all mutants displayed remarkably lowered k _cat (~3–20,000 fold) and k _cat/K _m (~8–187,500 fold) values and significantly increased △(△G) values (5.92–33.47 kJ/mol). Taken together, Asn94 in the GH28 T3 loop has a critical role in positioning the substrate in a correct way close to the catalytic residues.     

Resistance of Penicillium piceum F-648 to Hydrogen Peroxide under Short-Term and Prolonged Oxidative Stress

Resistance of Penicillium piceumF-648 to hydrogen peroxide under short-term and prolonged oxidative stress was studied. An increase in the activity of intracellular catalase in fungal cells after short-term exposure to hydrogen peroxide was shown. Activation of fungal cells induced by H₂O₂ depends on the H₂O₂ concentration, time of exposure, and growth phase of the fungus. Variants of P. piceum F-648 that produced two forms of extracellular catalase with different catalytic properties were obtained due to prolonged adaptation to H₂O₂. Catalase with low affinity for substrate was produced predominantly by the parent culture and variant 3; however, a high substrate affinity of catalase was observed in variant 5. Variant 5 of P. piceum F-648 displayed a high catalytic activity and operational stability of catalase in the presence of phosphate ions and a concentration of substrate less than 30 mM at pH more than 7.     

Binding of peroxiredoxin 6 to substrate determines differential phospholipid hydroperoxide peroxidase and phospholipase A2 activities

Peroxiredoxin 6 (Prdx6) differs from other mammalian peroxiredoxins both in its ability to reduce phospholipid hydroperoxides at neutral pH and in having phospholipase A₂ (PLA₂) activity that is maximal at acidic pH. We previously showed an active site C47 for peroxidase activity and a catalytic triad S32-H26-D140 necessary for binding of phospholipid and PLA₂ activity. This study evaluated binding of reduced and oxidized phospholipid hydroperoxide to Prdx6 at cytosolic pH. Incubation of recombinant Prdx6 with 1-palmitoyl-2-linoleoyl-sn-glycero-3-phosphocholine hydroperoxide (PLPCOOH) resulted in peroxidase activity, cys47 oxidation as detected with Prdx6-SO₂₍₃₎ antibody, and a marked shift in the Prdx6 melting temperature by circular dichroism analysis indicating that PLPCOOH is a specific substrate for Prdx6. Preferential Prdx6 binding to oxidized liposomes was detected by changes in DNS-PE or bis-Pyr fluorescence and by ultrafiltration. Site-specific mutation of S32 or H26 in Prdx6 abolished binding while D140 mutation had no effect. Treatment of A549 cells with peroxides led to lipid peroxidation and translocation of Prdx6 from the cytosol to the cell membrane. Thus, the pH specificity for the two enzymatic activities of Prdx6 can be explained by the differential binding kinetics of the protein; Prdx6 binds to reduced phospholipid at acidic pH but at cytosolic pH binds only phospholipid that is oxidized compatible with a role for Prdx6 in the repair of peroxidized cell membranes.