A three-nucleotide helix I is sufficient for full activity of a hammerhead ribozyme: advantages of an asymmetric design.

Trans-cleaving hammerhead ribozymes with long target-specific antisense sequences flanking the catalytic domain share some features with conventional antisense RNA and are therefore termed 'catalytic antisense RNAs'. Sequences 5' to the catalytic domain form helix I and sequences 3' to it form helix III when complexed with the target RNA. A catalytic antisense RNA of more than 400 nucleotides, and specific for the human immunodeficiency virus type 1 (HIV-1), was systematically truncated within the arm that constituted originally a helix I of 128 base pairs. The resulting ribozymes formed helices I of 13, 8, 5, 3, 2, 1 and 0 nucleotides, respectively, and a helix III of about 280 nucleotides. When their in vitro cleavage activity was compared with the original catalytic antisense RNA, it was found that a helix I of as little as three nucleotides was sufficient for full endonucleolytic activity. The catalytically active constructs inhibited HIV-1 replication about four-fold more effectively than the inactive ones when tested in human cells. A conventional hammerhead ribozyme having helices of just 8 nucleotides on either side failed to cleave the target RNA in vitro when tested under the conditions for catalytic antisense RNA. Cleavage activity could only be detected after heat-treatment of the ribozyme substrate mixture which indicates that hammerhead ribozymes with short arms do not associate as efficiently to the target RNA as catalytic antisense RNA. The requirement of just a three-nucleotide helix I allows simple PCR-based generation strategies for asymmetric hammerhead ribozymes. Advantages of an asymmetric design will be discussed.     

Kinetic characterization of two I/II format hammerhead ribozymes.

Five new hammerhead ribozymes were designed that assemble through the formation of helices I and II (I/II format) instead of the more standard assembly through helices I and III (I/III format). The substrate binding and cleavage properties of such hammerheads could potentially be different due to the absence of loop II and the requirement for the entire catalytic core to assemble. Two I/II format hammerheads, HHalpha1 and HHalpha5, which show structural homogeneity on native gels, were characterized kinetically. The association rate constants of both I/II hammerheads are unusually slow compared to the rate of RNA duplex formation. The dissociation rate constants indicate that the hammerhead core destabilizes an uninterrupted RNA helix somewhat less than was observed for I/III hammerheads. Whereas the cleavage rate constant of HHalpha5 is similar to that observed for I/III hammerheads, HHalpha1 cleaves 10-fold faster than any hammerhead previously reported. The temperature and pH dependence of the cleavage rate constant of HHalpha1 are similar to those reported for I/III hammerheads, suggesting a similar mechanism of cleavage.     

Extension of helix II of an HIV-1-directed hammerhead ribozyme with long antisense flanks does not alter kinetic parameters in vitro but causes loss of the inhibitory potential in living cells.

When designed to cleave a target RNA in trans, the hammerhead ribozyme contains two antisense flanks which form helix I and helix III by pairing with the complementary target RNA. The sequences forming helix II are contained on the ribozyme strand and represent a major structural component of the hammerhead structure. In the case of an inhibitory 429 nucleotides long trans-ribozyme (2as-Rz12) which was directed against the 5'-leader/gag region of the human immunodeficiency virus type 1 (HIV-1), helix II was not pre-formed in the single-stranded molecule. Thus, major structural changes are necessary before cleavage can occur. To study whether pre-formation of helix II in the non-paired 2as-Rz12 RNA could influence the observed cleavage rate in vitro and its inhibitory activity on HIV-1 replication, we extended the 4 base pair helix II of 2as-Rz12 to 6, 10, 21, and 22 base pairs respectively. Limited RNase cleavage reactions performed in vitro at 37 degrees C and at physiological ion strength indicated that a helix II of the hammerhead domain was pre-formed when its length was at least six base pairs. This modification neither affected the association rate with target RNA nor the cleavage rate in vitro. In contrast to this, extension of helix II led to a significantly decreased inhibition of HIV-1 replication in human cells. Together with the finding of others that shortening of helix II to less than two base pairs reduces the catalytic activity in vitro, this observation indicates that the length of helix II in the naturally occurring RNAs with a hammerhead domain is already close or identical to the optimal length for catalytic activity in vitro and in vivo.     

Proximity relationships between helices I and XI or XII in the lactose permease of Escherichia coli determined by site-directed thiol cross-linking.

The lactose permease of Escherichia coli was expressed in two fragments (split permease), each with a Cys residue, and cross-linking was studied. Split permease with a discontinuity in either loop II/III (N2C10permease) or loop VI/VII (N6C6permease) was used. Proximity of multiple pairs of Cys residues in helices I and XI or XII was examined by using three homobifunctional thiol-specific cross-linking reagents of different lengths and flexibilities (6 A, rigid; 10 A, rigid; 16 A, flexible) or iodine. Cys residues in the periplasmic half of helix I cross-link to Cys residues in the periplasmic half of helix XI. In contrast, no cross-linking is evident with paired Cys residues near the cytoplasmic ends of helices I and XI. Therefore, the periplasmic halves of helices I and XI are in close proximity, and the helices tilt away from each other towards the cytoplasmic face of the membrane. Cross-linking is also found with paired Cys residues near the middle of helices I and XII, but not with paired Cys residues near either end of the helices. Thus, helices I and XII are in close proximity only in the approximate middle of the membrane. Based on the findings, a modified helix packing model is proposed.     

The influence of imperfectly paired helices I and III on the catalytic activity of hammerhead ribozymes.

Several catalytic antisense RNAs directed against different regions of the genomic or antigenomic RNA of Sendai virus were constructed. All RNAs contained the same catalytic domain based on hammerhead ribozymes but some had deletions or mutations resulting in imperfect helices I and III. Pre-annealed substrate/ribozyme complexes were used to determine the rates of the cleavage process for the different ribozymes under single-turnover conditions. It was found that the sequence context surrounding the cleavable motif influenced the cleavage efficiencies. Deletions or mutations of nucleotides 2.1 or 15.1 and 15.2 according to the numbering system for hammerhead ribozymes of Hertel et al. destroyed catalytic activity. Deletions of nucleotide 2.2 or additional nucleotides in the helix I-forming region of the ribozyme did not destruct, but only reduced the cleavage efficiencies. Similar results were observed for a deletion of nucleotide 15.3. Simultaneous deletions within helices I and III resulted in alternative cleavage sites. The potential consequences for the specificity of the ribozyme reaction are discussed.     

Crosslinking between alpha and beta subunits defines the orientation and spatial relationship of some of the transmembrane helices of the proton-translocating pyridine nucleotide transhydrogenase of Escherichia coli

The proton-translocating pyridine nucleotide transhydrogenase of Escherichia coli is composed of two types of subunits, alpha and beta, organized as an alpha(2)beta(2) tetramer. The protein contains three recognizable domains, of which domain II is the transmembrane region of the molecule containing the pathway for proton translocation. Domain II is composed of four transmembrane helices at the carboxyl-terminus of the alpha subunit and either eight or nine transmembrane helices at the amino-terminal region of the beta subunit. We have introduced pairs of cysteine residues into a cysteine-free transhydrogenase by site-directed mutagenesis. Disulfide bond formation between some of these cysteine residues occurred spontaneously or on treatment with cupric 1, 10-phenanthrolinate. Analysis of crosslinked products confirmed that there are nine transmembrane helices in the domain II region of the beta subunit. The proximity to one another of several of the transmembrane helices was determined. Thus, helices 2 and 4 are close to helix 6 (nomenclature of Meuller and Rydstr?m, J. Biol. Chem. 274, 19072-19080, 1999), and helix 3 and the carboxyl-terminal eight residues of the alpha subunit are close to helix 7. In the alpha(2)beta(2) tetramer, helices 2 and 4 of one alpha subunit are close to the same pair of transmembrane helices of the other alpha subunit, and helix 6 of one beta subunit is close to helix 6 of the other beta subunit.     

Site-directed alkylation of cysteine replacements in the lactose permease of Escherichia coli: helices I, III, VI, and XI

To complete a study on site-directed alkylation of Cys replacements in the lactose permease of Escherichia coli (LacY), the reactivity of single-Cys mutants in helices I, III, VI, and XI, as well as some of the adjoining loops, with N-[14C]ethylmaleimide (NEM) or methanethiosulfonate ethylsulfonate (MTSES) was studied in right-side-out membrane vesicles. With the exception of several positions in the middle of helix I, which either face the bilayer or are in close proximity to other helices, the remaining Cys replacements react with the membrane-permeant alkylating agent NEM. In helices III and XI, most Cys replacements are also alkylated by NEM except for positions that face the bilayer. The reactivity of Cys replacements in helix VI is noticeably lower and only 45% of the replacements label. Binding of sugar leads to significant increases in the reactivity of Cys residues that are located primarily at the same level as the sugar-binding site or in the periplasmic half of each helix. Remarkably, studies with small, impermeant MTSES show that single-Cys replacements in the cytoplasmic portions of helices I and XI, which line the inward-facing cavity, are accessible to solvent from the periplasmic surface of the membrane. Moreover, addition of ligand results in increased accessibility of Cys residues to the aqueous milieu in the periplasmic region of the helices, which may reflect structural rearrangements leading to opening of an outward-facing cavity. The findings are consistent with the X-ray structure of LacY and with the alternating access model [Abramson, J., Smirnova, I., et al. (2003) Science 301, 610-615].     

Relative proximity and orientation of helices 4 and 8 of the GLUT1 glucose transporter

A structure has been proposed for glucose transporter-1 (GLUT1) based upon homology modeling that is consistent with the results of numerous mutagenesis studies (Mueckler, M., and Makepeace, C. (2004) J. Biol. Chem. 279, 10494-10499). To further test and refine this model, the relative orientation and proximity of transmembrane helices 4 and 8 were analyzed by chemical crosslinking of di-cysteine mutants created in a reporter GLUT1 construct. All six native cysteine residues of GLUT1 were changed to either glycine or serine residues by site-directed mutagenesis, resulting in a functional Glut1 construct with Cys mutated to Gly/Ser (C-less). The GLUT1 reporter molecule was engineered from C-less GLUT1 by creating a unique cleavage site for factor Xa protease within the central cytoplasmic loop and by eliminating the site of N-linked glycosylation. Fourteen functional di-cysteine mutants were then created from the C-less reporter construct, each mutant containing a single cysteine residue in helix 4 and one cysteine residue in helix 8. These mutants were expressed in Xenopus oocytes, and the sensitivity of each mutant to intramolecular crosslinking by two homo-bifunctional, thiol-specific crosslinking reagents, bismaleimidehexane and 1,4-phenylenedimaleimide, was ascertained by protease cleavage followed by immunoblot analysis. Four pairs of cysteine residues, Cys(148)/Cys(328), Cys(145)/Cys(328), Cys(148)/Cys(325), and Cys(145)/Cys(325), were observed to be in close enough proximity to be susceptible to crosslinking by one or both reagents. All five of the cysteine residues susceptible to crosslinking are predicted to lie on the same face of helix 4 or 8 and to reside close to the cytoplasmic face of the membrane. These data indicate that the cytoplasmic ends of helices 4 and 8 lie within 6-16 A of one another and that the two helices twist or tilt such that they are further than 16 A apart toward the center and the exoplasmic side of the membrane. An updated model for the clustering of the transmembrane helices of GLUT1 is presented based on these data.     

The global structure of the VS ribozyme

The VS ribozyme comprises five helical segments (II-VI) in a formal H shape, organized by two three-way junctions. It interacts with its stem-loop substrate (I) by tertiary interactions. We have determined the global shape of the 3-4-5 junction (relating helices III-V) by electrophoresis and FRET. Estimation of the dihedral angle between helices II and V electrophoretically has allowed us to build a model for the global structure of the complete ribozyme. We propose that the substrate is docked into a cleft between helices II and VI, with its loop making a tertiary interaction with that of helix V. This is consistent with the dependence of activity on the length of helix III. The scissile phosphate is well placed to interact with the probable active site of the ribozyme, the loop containing A730.     

Interhelical packing modulates conformational flexibility in the lactose permease of Escherichia coli

A key to obtaining an X-ray structure of the lactose permease of Escherichia coli (LacY) (Abramson, J., Smirnova, I., Kasho, V., Verner, G., Kaback, H. R., and Iwata, S. (2003) Science 301, 549-716) was the use of a mutant in which Cys154 (helix V) is replaced with Gly. LacY containing this mutation strongly favors an inward-facing conformation, which binds ligand with high affinity, but catalyzes little transport and exhibits few if any of the ligand-dependent conformational changes observed with wild-type LacY. The X-ray structure demonstrates that helix V crosses helix I in the approximate middle of the membrane in such a manner that Cys154 lies close to Gly24 (helix I). Therefore, it seems likely that replacing Cys154 with Gly may lead to tighter packing between helices I and V, thereby resulting in the phenotype observed. Consistently, replacement of Gly24 with Cys in the C154G mutant rescues significant transport activity, and the mutant exhibits properties similar to wild-type LacY with respect to substrate binding and thermostability. However, the only other replacements that rescue transport to any extent whatsoever are Val and Asp, both of which are much less effective than Cys. The results suggest that, although helix packing probably plays an important role with respect to the properties of the C154G mutant, the ability of Cys at position 24 to rescue transport activity of C154G is more complicated than simple replacement of bulk between positions 24 and 154. Rather, activity is dependent on more subtle interactions between the helices, and mutations that disrupt interactions between helix IV and loop 6-7 or between helices II and IV also rescue transport in the C154G mutant.     

Unexpected anisotropy in substrate cleavage rates by asymmetric hammerhead ribozymes.

RNA substrates which form relatively short helices I and III with hammerhead ribozymes are generally cleaved more rapidly than substrates which create longer binding helices. We speculated that for optimum cleavage rates, one of the helices needed to be relatively weak. To identify this helix, a series of ribozymes and substrates of varying lengths were made such that in the complex, helices I and III consisted of 5 and 10 bp respectively or vice versa. In two independent systems, substrates in the complexes with the shorter helix I and longer helix III were cleaved one to two orders of magnitude more rapidly than those in the complexes with the longer helix I and shorter helix III. Similar results were obtained whether the numbers of base pairs in helices I and III were limited either by the length of the hybridizing arms of the ribozyme or the length of the substrate. The phenomenon was observed for both all-RNA and DNA armed ribozymes. Thus, a relatively short helix I is required for fast cleavage rates in pre-formed hammer-head ribozyme-substrate complexes. When helix III has 10 bp, the optimum length for helix I is approximately 5 bp.     

Electron crystallography reveals the structure of metarhodopsin I

Rhodopsin is the prototypical G protein-coupled receptor, responsible for detection of dim light in vision. Upon absorption of a photon, rhodopsin undergoes structural changes, characterised by distinct photointermediates. Currently, only the ground-state structure has been described. We have determined a density map of a photostationary state highly enriched in metarhodopsin I, to a resolution of 5.5 A in the membrane plane, by electron crystallography. The map shows density for helix 8, the cytoplasmic loops, the extracellular plug, all tryptophan residues, an ordered cholesterol molecule and the beta-ionone ring. Comparison of this map with X-ray structures of the ground state reveals that metarhodopsin I formation does not involve large rigid-body movements of helices, but there is a rearrangement close to the bend of helix 6, at the level of the retinal chromophore. There is no gradual build-up of the large conformational change known to accompany metarhodopsin II formation. The protein remains in a conformation similar to that of the ground state until late in the photobleaching process.     

Role of the B helix in early folding events in apomyoglobin: evidence from site-directed mutagenesis for native-like long range interactions

The folding pathways of four mutants in which bulky hydrophobic residues in the B helix of apomyoglobin (ApoMb) are replaced by alanine (I28A, L29A, I30A, and L32A) have been analyzed using equilibrium and kinetic methods employing NMR, CD, fluorescence and mass spectrometry. Hydrogen exchange pulse-labeling followed by mass spectrometry reveals detectable intermediates in the kinetic folding pathways of each of these mutants. Comparison of the quench-flow data analyzed by NMR for the wild-type protein and the mutants showed that the substitutions I28A, L29A and L32A lead to destabilization of the B helix in the burst phase kinetic intermediate, relative to wild-type apomyoglobin. In contrast, the I30A mutation apparently has a slight stabilizing effect on the B helix in the burst phase intermediate; under weak labeling conditions, residues in the C helix region were also relatively stabilized in the mutant compared to the wild-type protein. This suggests that native-like helix B/helix C packing interactions occur in the folding intermediate. The L32A mutant showed significantly lower proton occupancies in the burst phase for several residues in the G helix, specifically F106, I107, E109 and A110, which are in close proximity to L32 in the X-ray structure of myoglobin, providing direct evidence that native-like helix B/helix G contacts are formed in the apomyoglobin burst phase intermediate. The L29A mutation resulted in an increase in burst phase proton occupancies for several residues in the E helix. Since these regions of the B and E helices are not in contact in the native myoglobin structure, these effects suggest the possibility of non-native B/E packing interactions in the kinetic intermediate. The differing effects of these B helix mutations on the apomyoglobin folding process suggests that each side-chain plays a different and important role in forming stable structure in the burst phase intermediate, and points to a role for both native-like and non-native contacts in stabilization of the folding intermediate.     

Alternative tertiary structure attenuates self-cleavage of the ribozyme in the satellite RNA of barley yellow dwarf virus.

A self-cleaving satellite RNA associated with barley yellow dwarf virus (sBYDV) contains a sequence predicted to form a secondary structure similar to catalytic RNA molecules (ribozymes) of the 'hammerhead' class (Miller et al., 1991, Virology 183, 711-720). However, this RNA differs from other naturally occurring hammerheads both in its very slow cleavage rate, and in some aspects of its structure. One striking structural difference is that an additional helix is predicted that may be part of an unusual pseudoknot containing three stacked helices. Nucleotide substitutions that prevent formation of the additional helix and favor the hammerhead increased the self-cleavage rate up to 400-fold. Compensatory substitutions, predicted to restore the additional helix, reduced the self-cleavage rate by an extent proportional to the calculated stability of the helix. Partial digestion of the RNA with structure-sensitive nucleases supported the existence of the proposed alternative structure in the wildtype sequence, and formation of the hammerhead in the rapidly-cleaving mutants. This tertiary interaction may serve as a molecular switch that controls the rate of self-cleavage and possibly other functions of the satellite RNA.     

Tertiary contacts of helix V in the lactose permease determined by site-directed chemical cross-linking in situ

The six N-terminal transmembrane helices (N6) and the six C-terminal transmembrane helices (C6) in lactose permease, each containing a single Cys residue, were coexpressed, and cross-linking was studied. The proximity of paired Cys residues in helices V and VII, VIII, or X was studied by thiol-specific chemical cross-linking. The results demonstrate that Cys residues in the periplasmic half of helix V cross-link with Cys residues in the periplasmic half of helix VII. In contrast, no cross-linking is evident with paired Cys residues in the cytoplasmic halves of helices V and VII. Moreover, Cys residues on one entire face of helix V cross-link with Cys residues on one face of helix VIII. Finally, paired Cys residues at the cytoplasmic ends of helices V and X cross-link, but no cross-linking is observed when paired Cys residues are placed at the periplasmic ends of the two helices. Taken together, the results indicate that the periplasmic halves of helices V and VII are in close proximity and that the two helices tilt away from one another toward the cytoplasmic side of the membrane. Furthermore, helices V and VIII are in close proximity throughout their lengths and do not tilt appreciably with respect to one another, and helices V and X are in close proximity at the cytoplasmic but not at the periplasmic face of the membrane.     

The size of hammerhead ribozymes is related to cleavage kinetics: the role of substrate length

The structure and function of small complexes formed between trans-cleaving hammerhead ribozymes and their substrates are being intensely studied in vitro. Conversely, target strands for hammerhead ribozymes in living cells are usually much longer, and cleavage kinetics in vitro of long substrates are usually approximately 100-fold slower. However, on the mechanistic level, not much is known about the influence of substrate length on cleavage kinetics. Here, we describe the influence of the length of the substrate strand on cleavage kinetics in vitro of two trans-cleaving hammerhead ribozymes. Progressive extension of the 3' end of the substrate decreases cleavage kinetics in a length-dependent manner. A six-nucleotide protruding 3' end of helix I is related to a decrease of the cleavage rate by one order of magnitude. Extension of the 5' end of the substrate shows a more complex relationship of the length-related decrease of cleavage activity. Decreased cleavage activity can be compensated by increased magnesium concentrations. An explanation of this finding does not seem to include major influences of the extended substrate on the thermal stability or the global structural arrangement of the three double-strand helices of the hammerhead structure. We hypothesize that long-range influences between the termini of the substrate strand and the catalytic centre could be responsible for decreased cleavage rates.     

A helical twist-induced conformational switch activates cleavage in the hammerhead ribozyme

We have captured the structure of a pre-catalytic conformational intermediate of the hammerhead ribozyme using a phosphodiester tether formed between I and Stem II. This phosphodiester tether appears to mimic interactions in the wild-type hammerhead RNA that enable switching between nuclease and ligase activities, both of which are required in the replicative cycles of the satellite RNA viruses from which the hammerhead ribozyme is derived. The structure of this conformational intermediate reveals how the attacking nucleophile is positioned prior to cleavage, and demonstrates how restricting the ability of Stem I to rotate about its helical axis, via interactions with Stem II, can inhibit cleavage. Analogous covalent crosslinking experiments have demonstrated that imposing such restrictions on interhelical movement can change the hammerhead ribozyme from a nuclease to a ligase. Taken together, these results permit us to suggest that switching between ligase and nuclease activity is determined by the helical orientation of Stem I relative to Stem II.     

Structural features and light-dependent changes in the sequence 59-75 connecting helices I and II in rhodopsin: a site-directed spin-labeling study.

Twenty-one single-cysteine substitution mutants were prepared in the sequence 56-75 between transmembrane helices I and II at the cytoplasmic surface of bovine rhodopsin. Each mutant was reacted with a sulfhydryl-specific reagent to produce a nitroxide side chain. The electron paramagnetic resonance of the labeled proteins in dodecyl maltoside solution was analyzed to provide the relative mobility and accessibility of the nitroxide side chain to both polar and nonpolar paramagnetic reagents. The results indicate that the hydrophobic-water interface of the micelle intersects helices I and II near residues 64 and 71, respectively. Thus, the sequence 64-71 is in the aqueous phase, while 56-63 and 72-75 lie in the transmembrane helices I and II, respectively. The lipid-facing surfaces on transmembrane helices I and II near the cytoplasmic surface correspond to approximately 180 degrees and 90 degrees of arc on the helical surfaces, respectively. Photoactivation of rhodopsin produced changes in structure in the region investigated, primarily around helix II. However, these changes are much smaller than those noted by spin labels in helix VI (Altenbach, C., Yang, K., Farrens, D., Farahbakhsh, Z., Khorana, H. G., and Hubbell, W. L. (1996) Biochemistry 35, 12470).     

A Y form of hammerhead ribozyme trapped by photo-cross-links retains full cleavage activity.

The conformation in solution of a small bipartite I-III hammerhead ribozyme has been deduced from the photo-crosslinks formed between cleavable ribo-deoxysubstrates appropriately substituted with the probe deoxy-4-thiouridine and ribozyme residues. The ribozyme-substrate complex is able to adopt a Y-like structure with stems I and II in close proximity in the presence of 400 mM Na+ only. Indeed, a cross-link joining stem I (1.6) to loop II (AL2.4) forms in significant amount under these conditions. This cross-linked complex furthermore elicits, upon Mg2+ addition, a catalytic activity similar to that exhibited by the complexes cross-linked at the distal ends of either stem I or stem III or of the non-substituted bipartite complex. This shows that the reaction mechanism is fully compatible with a strong structural constraint between stems I and II and that sodium ions at high concentration (400 mM) are able to promote a proper folding of hammerhead ribozymes. None of the multiple cross-links formed within the ribozyme core (probe in position 16.1 or 1.1) was found catalytically active. The cross-link patterns nevertheless indicate a higher flexibility of the core in Na+ than in Mg2+. While most of the cross-links can be accommodated by the Y solution structure, some of them (16.1 to U4 and 2.1) definitely can not, suggesting that additional alternative inactive conformations exist in solution.     

Helices VII and X in the lactose permease of Escherichia coli: proximity and ligand-induced distance changes.

By using functional lactose permease devoid of native Cys residues with a discontinuity in the periplasmic loop between helices VII and VIII (N(7)/C(5) split permease), cross-linking between engineered paired Cys residues in helices VII and X was studied with the homobifunctional, thiol-specific cross-linkers 1,1-methanediyl bismethanethiosulfonate (3 A), N,N'-o- phenylenedimaleimide (6 A) and N,N'-p-phenylenedimaleimide (10 A). Mutant Asp240-->Cys (helix VII)/Lys319-->Cys (helix X) cross-links most efficiently with the 3 A reagent, providing direct support for studies indicating that Asp240 and Lys319 are in close proximity and charge paired. Furthermore, cross-linking the two positions inactivates the protein. Other Cys residues more disposed towards the middle of helix VII cross-link to Cys residues in the approximate middle of helix X, while no cross-linking is evident with paired Cys residues at the periplasmic or cytoplasmic ends of these helices. Thus, helices VII and X are in close proximity in the middle of the membrane. In the presence of ligand, the distance between Cys residues at positions 240 (helice VII) and 319 (helix X) increases. In contrast, the distance between paired Cys residues more disposed towards the cytoplasmic face of the membrane decreases in a manner suggesting that ligand binding induces a scissors-like movement between the two helices. The results are consistent with a recently proposed mechanism for lactose/H(+) symport in which substrate binding induces a conformational change between helices VII and X, during transfer of H(+) from His322 (helix X)/Glu269 (helix VIII) to Glu325 (helix X).