A Spectrophotometric Lipase Activity Assay by Coupled Lipase-Lipoxygenase in Reverse Micelles

A new, continuous spectrophotometric method is described for determining lipase activity using a reverse micelle system, in which lipase (EC 3.1.1.3) and lipoxygenase (EC 1.13.11.12) are dissolved. The reverse micelle system consists of 2-ethyl hexyl sodium sulfosuccinate (AOT)-isooctane and water. Trilinolein is used as the lipase substrate; linoleate hydroperoxide is the end product of the oxidation catalyzed by lipoxygenase, which acts as an auxiliary coupled-enzyme of lipase. The method appears useful both for detailed kinetic studies of lipase and for serial analyses using sunflower oil, a cheaper substrate. This assay offers the typical advantages of the continuous direct photometric methods in that it is rapid, reproducible and sufficiently sensitive for measuring lipase activity even in some crude commercial preparations.     

A Spectrophotometric Lipase Activity Assay by Coupled Lipase-Lipoxygenase in Reverse Micelles

A new, continuous spectrophotometric method is described for determining lipase activity using a reverse micelle system, in which lipase (EC 3.1.1.3) and lipoxygenase (EC 1.13.11.12) are dissolved. The reverse micelle system consists of 2-ethyl hexyl sodium sulfosuccinate (AOT)-isooctane and water. Trilinolein is used as the lipase substrate; linoleate hydroperoxide is the end product of the oxidation catalyzed by lipoxygenase, which acts as an auxiliary coupled-enzyme of lipase. The method appears useful both for detailed kinetic studies of lipase and for serial analyses using sunflower oil, a cheaper substrate. This assay offers the typical advantages of the continuous direct photometric methods in that it is rapid, reproducible and sufficiently sensitive for measuring lipase activity even in some crude commercial preparations.     

Esterification reactions catalyzed by Chromobacterium viscosum lipase in CTAB-based microemulsion systems

Chromobacterium viscosum (CV) lipase solubilized in water-in-oil (w/o) microemulsions based on the cationic surfactant hexadecyltrimethylammonium bromide (CTAB) have been used for multigram-scale ester synthesis, including the kinetic resolution of a secondary alcohol. The stability of CV lipase in all the CTAB microemulsions studied was excellent and was superior to that observed in aqueous buffer at the same pH and temperature. Kinetic studies were performed using the synthesis of ethylhexadecanoate as a model reaction. Under pseudo-first-order conditions, the synthesis rates were linearlydependent on the enzyme and fatty acid concentrations and the R dependence shows the characteristic bell-shaped curve (where R = [H(2)O]/[surfactant]). The dependence of enzyme activity toward octyldecanoate synthesis on the pH of the dispersed buffer phase is in marked contrast to that observed for the pH dependence of CV lipase toward p-nitrophenylbutyrate hydrolysis. In the former case, the pH-activity profile is approximately sigmoidal, which may reflect the ionization state of the fatty acid substrate. In the latter case, the pH dependence is minimal at both R = 10 and R = 50, suggesting the enzyme does not experience a changed pH environment. Inclusion of a pH-sensitive probe molecule into those incubations containing fatty acid clearly demonstrates that the probe molecule experiences a changed environment consistent with that expected for the selected buffer. An in situ Fourier transform nuclear magnetic resonance (FT-NMR) assay has been developed which allows continuous monitoring of the esterification reactions, thereby providing an additional means of determining initial rates. The method may be of general value for lipase assays in microemulsions since it may provide, at the same time, information regarding enzyme regioselectivity. (c) 1995 John Wiley & Sons, Inc.     

Study on immunocapture-chemiluminescence assay of lipase activity in a biological sample.

A new approach for the determination of lipase (triacylglycerol lipase, EC.3.1.1.3) activity in a biological sample was investigated by combining an immunocapture technique with a chemiluminescence (CL) assay method in order to eliminate interference with CL detection. The proposed method consists of an immunocapture step to trap lipase and a subsequent step for CL detection of the activity of the captured lipase. The CL detection is based on the luminol-hydrogen peroxide (H(2)O(2))-horseradish peroxidase (HRP) reaction and utilizes a proenhancer substrate [a lauric acid ester of 2-(4-hydroxyphenyl)-4,5-diphenylimidazole (HDI)] which liberates an active enhancer, HDI, by enzymatic hydrolysis. A polyclonal antibody prepared with porcine pancreas lipase was used for the immunocapture. The proposed immunocapture-CL method effectively eliminated the interference with the CL reaction from biological components and enabled the determination of spiked porcine pancreas lipase activity in serum samples in the range 0.41-1.1 U(HDI) (1 U(HDI) corresponds to the amount which liberates 1 pmol HDI/min at 37 degrees C from the substrate). The method was further applied to the assay of the activity for human pancreas lipase in serum and the results showed good correlation (r = 0.871) with those by the conventional colorimetric method.     

Statistical optimization of lipase catalyzed hydrolysis of methyloleate by response surface methodology

Hydrolysis of methyloleate was optimized using lipase from Chromobacterium viscosum immobilized on IRC-50. The optimization was studied by a statistical methodology using response surface methodology (RSM). The cumulative interactive effect of substrate, water concentration and time was studied in optimizing the hydrolysis of methyloleate. The interactive effect of substrate-time was found to be significant compared to substrate-water and time-water interactions. A well correlation was observed between the optimum values obtained from the response surface contour plots and from the quadratic regression model equation. The optimal values obtained for substrate, water and time were found to be in the experimental range chosen.     

Some Properties of the Lipase of Geotrichum candidum Evaluated by a Fluorimetric Assay Technique

The oleic acid ester of 4-methylumbelliferone was found to be a suitable substrate for the fluorimetric assay of the lipase of Geotrichum candidum . This substrate spontaneously formed an emulsion in the assay mixture and had a K _m of 10·3 μM. The fluorimetric method was at least a thousand times more sensitive than the conventional potentiometric method. The lower limit of sensitivity of the assay was 1 nmole fatty acid released per min. Optimum conditions for detection of lipase in the culture filtrate of G. candidum were devised. The influence of pH, Ca²⁺ and several other factors were investigated.     

Chemiluminescence assay of lipase activity using a synthetic substrate as proenhancer for luminol chemiluminescence reaction.

A novel chemiluminescence (CL) assay method for lipase (triacylglycerol lipase, E.C.3.1.1.3) activity was developed by using the lauric acid ester of 2-(4-hydroxyphenyl)-4,5-diphenylimidazole (HDI) as a substrate. The method is based on the enhanced CL reaction of luminol-hydrogen peroxide-horseradish peroxidase (HRP) with HDI that is liberated from the substrate by enzymatic hydrolysis. To simplify the assay procedure, both the hydrolysis of the substrate and the enhanced CL reaction were performed in the same reaction mixture. Lipases from Candida cylindracea and porcine pancreas were successfully determined with the detection limits (blank signal + 3 SD) of 0.05 and 50.0 mU/tube, respectively. The method is simple and rapid, permitting the completion of single assay within 5 min. The reproducibilities obtained with replicate assays were relative standard deviations (RSDs) of <=> 4.7% for within-day and <=> 6.0% for between-day assays.     

A broad pH range indicator-based spectrophotometric assay for true lipases using tributyrin and tricaprylin

A continuous assay is proposed for the screening of acidic, neutral, or alkaline lipases using microtiter plates, emulsified short- and medium-chain TGs, and a pH indicator. The lipase activity measurement is based on the decrease of the pH indicator optical density due to protonation which is caused by the release of FFAs during the hydrolysis of TGs and thus acidification. Purified lipases with distinct pH optima and an esterase were used to validate the method. The rate of lipolysis was found to be linear with time and proportional to the amount of enzyme added in each case. Specific activities measured with this microplate assay method were lower than those obtained by the pH-stat technique. Nevertheless, the pH-dependent profiles of enzymatic activity were similar with both assays. In addition, the substrate preference of each enzyme tested was not modified and this allowed discriminating lipase and esterase activities using tributyrin (low water solubility) and tricaprylin (not water soluble) as substrates. This continuous lipase assay is compatible with a high sample throughput and can be applied for the screening of lipases and lipase inhibitors from biological samples.     

Development of a high-throughput liquid state assay for lipase activity using natural substrates and rhodamine B

A fluorescence-based assay for the determination of lipase activity using rhodamine B as an indicator, and natural substrates such as olive oil, is described. It is based on the use of a rhodamine B–natural substrate emulsion in liquid state, which is advantageous over agar plate assays. This high-throughput method is simple and rapid and can be automated, making it suitable for screening and metagenomics application. Reaction conditions such as pH and temperature can be varied and controlled. Using triolein or olive oil as a natural substrate allows monitoring of lipase activity in reaction conditions that are closer to those used in industrial settings. The described method is sensitive over a wide range of product concentrations and offers good reproducibility.     

A novel and simple colorimetric assay for human serum lipase.

A new and simple colorimetric method for human serum lipase [EC 3.1.1.3] assay has been developed, using 2,3-dimercaptopropan-1-ol tributyroate as a substrate, 5,5'-dithiobis(2-nitro-benzoic acid) as a chromogenic reagent, phenylmethylsulfonyl fluoride as an inhibitor of serum esterases, and sodium dodecylsulfate as a lipase activator. The method requires only 50 micron1X2 of serum sample and a reaction time of less than 30 min. The method is reproducible and sensitive enough to measure low levels of lipase activity in normal and abnormal sera. The gel filtration of serum samples on a Sephadex G-200 column gave one peak of lipase activity, when measured by the present method, and the molecular weight of the enzyme was identical with that of lipase of human pancreatic origin, confirming the specificity of this new method for the serum lipase.     

Hydrolysis of methyloleate using immobilized lipase from Chromobacterium viscosum

Various lipases were screened for their hydrolytic efficiency towards methyloleate. Lipase from Chromobacterium viscosum gave highest hydrolysis efficiency of 92% in 24?h. Different cation exchange resins were screened to immobilize lipase from Chromobacterium viscosum. A weakly acidic macroreticular type resin, IRC-50 having carboxyl end group functionality gave highest activity yield of 18.8%. Strongly acidic cation exchange resins with sulphonic functionality and macroreticular type did not give much activity yield when compared to weakly acidic non macroreticular type resins. It was observed that end group functionality and structure of the matrices plays an important role in obtaining highest activity yield. For a specific water concentration, the hydrolysis ratio reached 85% in less than 7?h when the substrate to enzyme ratio was 4. As the ratio is increased above 4, the availability of water at the interface has become a limitation for obtaining maximum hydrolysis.     

Simple gas chromatography method for lipase assay

A gas chromatography method for lipase assay using tributyrin as substrate is presented. Tributyrin is hydrolyzed by lipase to produce free butyric acid that is directly quantified by gas chromatography. The estimation of lipase activity takes only 6 min after enzyme reaction. The technique needs a small enzyme sample and is useful for analysis of large number of lipase samples. © Rapid Science Ltd. 1998     

Kinetic studies of Chromobacterium viscosum lipase in AOT water in oil microemulsions and gelatin microemulsion-based organogels

Kinetic studies have shown that octyl decanoate synthesis by Chromobacterium viscosum (CV) lipase in sodium bis-2-(ethylhexyl) sulfosuccinate (AOT) water in oil (w/o) microemulsions occurs via the nonsequential (ping-pong) bi bi mechanism. There was evidence of single substrate inhibition by decanoic acid at high concentrations. Initial rate data yielded estimates for acid and alcohol Michaelis constants of ca. 10(-1) mol dm(-3) and a maximum rate under saturation conditions of ca. 10(-3) mol dm(-3) s(-1) for a lipase concentration of 0.36 mg cm(-3). CV lipase immobilized in AOT microemulsion-based organogels (MBGs) was also found to catalyze the synthesis of octyl decanoate according to the ping-pong bi bi mechanism. Reaction rates were similar in the free and immobilized systems under comparable conditions. Initial rates at saturating (but noninhibiting) substrate concentrations were first order with respect to CV lipase concentration in both w/o microemulsions and the MBG/oil systems. Gradients yielded an apparent k(cat) = 4.4 x 10(-4) mol g(-1) s(-1) in the case of w/o microemulsions, and 6.1 x 10(-4) mol g(-1) s(-1) for CV lipase immobilized in the MBGs. A third system comprising w/o microemulsions containing substrates and gelatin at concentrations comparable to those employed in the MBG formulations, provided a useful link between the conventional liquid microemulsion medium and the solid organogels. The nongelation of these intermediate systems stems from the early inclusion of substrate during a modified preparative protocol. The presence of substrate appears to prevent the development of a percolated microstructure that is thought to be a prerequisite for MBG formation. FT-NMR was employed as a semicontinuous in situ assay procedure. The apparent activity expressed by CV lipase in compositionally equivalent liquid and solid phase gelatin-containing systems was similar. An apparent activation energy of 24 +/- 2 kJ mol(-1) was determined by (1)H-NMR for esterification in gelatin-containing w/o microemulsions. This value agrees with previous determinations for CV lipase-catalyzed synthesis of octyl decanoate in "conventional" w/o microemulsions and MBG/oil systems. The similarities in lipase behavior are consistent with the claim, based largely on structural measurements, that the physico-chemical properties of the lipase-containing w/o microemulsion are to a large extent preserved on transformation to the daughter organogel. The close agreement of apparrent activation energies suggests that substrate mass transfer is not rate determining in the three studied systems. (c) 1997 John Wiley & Sons, Inc. Biotechnol Bioeng 54:416-427, 1997.     

Use of naturally fluorescent triacylglycerols from Parinari glaberrimum to detect low lipase activities from Arabidopsis thaliana seedlings

The aim of this study was to design a convenient, specific, sensitive, and continuous lipase activity assay using natural long-chain triacylglycerols (TAGs). Oil was extracted from Parinari glaberrimum seed kernels and the purified TAGs were used as a substrate for detecting low levels of lipase activities. The purified TAGs are naturally fluorescent because more than half of the fatty acids from Parinari oil are known to contain 9,11,13, 15-octadecatetraenoic acid (parinaric acid) in its esterified form. The presence of detergents (sodium taurodeoxycholate, CHAPS, Sulfobetaine SB12, Tween 20, Brij 35, Dobanol, n-dodecylglucoside) above their critical micellar concentration dramatically increases the fluorescence of the parinaric acid released by various lipases. This increase in the fluorescence intensity is linear with time and proportional to the amount of lipase added. This new method, performed under non-oxidative conditions, was applied successfully to detecting low lipase levels in crude protein extracts from plant seeds and could be scaled down to microtiterplate measurements. Quantities as low as 0.1 ng of pure pancreatic lipase could be detected under standard conditions (pH 8). Lipase activity can also be assayed in acidic media (pH 5) using human gastric lipase. This simple and continuous assay is compatible with a high sample throughput and might be applied to detecting true lipase activities in various biological samples.     

A stable, radioactive substrate emulsion for assay of lipoprotein lipase.

A method is described for the assay of lipoprotein lipase, using a stable, radioactive substrate emulsion. Fatty acid-labeled trioleoylglycerol was emulsified by homogenization in glycerol with lecithin as detergent. This anhydrous emulsion was stable for at least six weeks. Substrate solutions for enzyme assay were prepared by diluting the emulsion with buffer containing serum and albumin. The fatty acid produced on hydrolysis was isolated in a one-step liquid-liquid partition system. Incubations with extracts of acetone powders from adipose tissue displayed characteristics of lipoprotein lipase activity, i.e., serum dependence and inhibition by NaCl and protamine. The method is rapid (less than 1 hour), sensitive and reproducible, and suitable for routine use.     

Enantioselective esterification of 2-methylbutyric acid catalyzed via lipase immobilized in microemulsion-based organogels

Chromobacterium viscosum lipase (c.v. lipase) was immobilized in microemulsion-based órganogels and successfully utilized for the enantioselective esterification of (+/?)-2-methylbutynic acid to preferentially form ethyl-(+)-2-methylbutyrate. The reaction time course and enantioselectivity obtained with the organogel—lipase system was compared and contrasted to that achieved in a reversed micellar solution system that contained lipase solubilized in its inner water core as well as that in which powdered lipases were directly dispersed in an organic solvent. The unique properties and potential benefits of the organogel system are discussed. © 1994 Wiley-Liss, Inc.     

Purification of Chromobacterium viscosum lipases using reversed micelles

Summary Two upases produced by Chromobacterium viscosum were isolated and purified by liquid-liquid extraction using organic solvents containing reversed micelles. One lipase (lipase A) was purified from the original crude enzyme preparation by 4,3-fold with a recovery of 91% and the other (lipase B) by 3,7-fold with a recovery of 76%.     

An ultrafiltration membrane bioreactor for the lipolysis of olive oil in reversed micellar media

The enzymatic hydrolysis of olive oil using Chromobacterium viscosum lipase B encapsulated in reversed micelles of dioctyl sodium sulfosuccinate (AOT) in isooctane was investigated in an ultrafiltration ceramic membrane reactor of tubular type, operating in a batch mode. Water concentration was found to be a critical parameter in the enzyme kinetics and hydrolysis yield of the reaction. The size of micelles, recirculation rate, and substrate concentration were found to be the major factors affecting the separation process. A correlation that enables the prediction of final conversion degrees in this bioreactor from the initial reaction conditions was established. (c) 1993 Wiley & Sons, Inc.