Lumbricus terrestris hemoglobin--the architecture of linker chains and structural variation of the central toroid

The extracellular giant hemoglobin from the earthworm Lumbricus terrestris was reconstructed at 14.9-A resolution from cryo-electron microscope images, using a new procedure for estimating parameters of the contrast transfer (CTF) function. In this approach, two important CTF parameters, defocus and amplitude contrast ratio, can be refined iteratively within the framework of 3D projection alignment procedure, using minimization of sign disagreement between theoretical CTF and cross-resolution curves. The 3D cryo-EM map is in overall good agreement with the recent X-ray crystallography map of Royer et al. (2000, Proc. Natl. Acad. Sci. USA 97, 7107-7111), and it reveals the local threefold arrangement of the three linker chains present within each 1/12 of the complex. The 144 globin chains and 36 linker chains within the complex are clearly visible, and the interdigitation of the 12 coiled-coil helical spokes forming the central toroidal piece is confirmed. Based on these findings, two mechanisms of the dodecameric unit assembly are proposed and termed "zigzag" and "pairwise" polymerizations. However, the detection by cryo-EM of 12 additional rod-like bodies within the toroid raises the possibility that the architecture of the toroid is more complex than previously thought or that yet unknown ligands or allosteric effectors for this oxygen carrier are present.     

Helical Perturbations of the Flagellar Filament:Rhizobium lupiniH13–3 at 13 Å Resolution

Flagellar filaments are highly conserved structures in terms of the underlying symmetry of the polymer, subunit domain organization of the flagellin monomer, amino acid composition and primary sequence at the N and C termini. Traditionally, filaments are classified as “plain” or “complex.” In complex filaments, the helical lattice is perturbed in a pairwise manner such that the symmetry is reduced along the 6-start helical lines. Both plain (unperturbed) and complex (helically perturbed) components are helically symmetric and share a common lattice. The perturbation inRhizobium lupiniH13–3 results in a subunit composed of a dimer of flagellin. We have generated a ≈13 Å resolution three-dimensional density map of the complex filament ofR. lupiniH13–3 from low-dose images of negatively stained filaments. Compared to a previous map, which extended to only ≈25 Å resolution and which was generated from only five filaments containing six layer-lines each, the current map is a product of merging 139 data sets containing 66 layer-lines each. The higher resolution and improved signal-to-noise yield a detailed and interpretable density map. The density map is divided into four concentric rings. These amount to two dense cylinders interconnected by low density radial spokes and wrapped by a three-start external winding. The unperturbed component of the map is strikingly similar to the known plain filament maps and, in particular, to that ofCaulobacter crescentus. The helically perturbed component contributes mainly to the filaments's exterior (domain D3) where it comprises the tips of the outer domains interconnecting, pairwise, along the 11-start protofilaments and, again, laterally along the 6-start lines forming vertical and horizontal loops. Strong intersubunit connectivity occurs in the D2 shell and in the inner shell which is dominated by 3-start densities. The contribution of the complex component to the radial spokes seems negligible.     

Three-dimensional reconstruction of the hexagonal bilayer hemoglobin of the hydrothermal vent tube worm Riftia pachyptila by cryoelectron microscopy

A frozen-hydrated specimen of the V1 hemoglobin of the hydrothermal vent tube worm Riftia pachyptila was observed in the electron microscope and subjected to three-dimensional reconstruction by the method of random conical tilt series. The 3D volume possesses a D₆ point-group symmetry. When viewed along its 6-fold axis the vertices of its upper hexagonal layer are 16° clockwise rotated compared to those of the lower layer. A central linker complex is decorated by 12 hollow globular substructures. The linker complex comprises (i) a central hexagonal toroid, (ii) two internal bracelets onto which the hollow globular substructures are built, and (iii) six structures connecting the two hexagonal layers. The hollow globular substructures, related to the dodecamers of globin chains resulting from the dissociation of the hexagonal bilayer hemoglobin, have a local pseudo 3-fold symmetry and are composed each of three elongated structures visible when the volume is displayed at high threshold. At a resolution of 36 Å, the 3D volumes of the hexagonal bilayer hemoglobins of Riftia pachyptyla and of the leech Macrobdella decora look almost perfectly identical. © 1996 Wiley-Liss, Inc.     

The Phylogenetics of Mycotoxin and Sclerotium Production in Aspergillus flavus and Aspergillus oryzae

Aspergillus flavus is a common filamentous fungus that produces aflatoxins and presents a major threat to agriculture and human health. Previous phylogenetic studies of A. flavus have shown that it consists of two subgroups, called groups I and II, and morphological studies indicated that it consists of two morphological groups based on sclerotium size, called “S” and “L.” The industrially important non-aflatoxin-producing fungus A. oryzae is nested within group I. Three different gene regions, including part of a gene involved in aflatoxin biosynthesis (omt12), were sequenced in 33 S and L strains of A. flavus collected from various regions around the world, along with three isolates of A. oryzae and two isolates of A. parasiticus that were used as outgroups. The production of B and G aflatoxins and cyclopiazonic acid was analyzed in the A. flavus isolates, and each isolate was identified as “S” or “L” based on sclerotium size. Phylogenetic analysis of all three genes confirmed the inference that group I and group II represent a deep divergence within A. flavus. Most group I strains produced B aflatoxins to some degree, and none produced G aflatoxins. Four of six group II strains produced both B and G aflatoxins. All group II isolates were of the “S” sclerotium phenotype, whereas group I strains consisted of both “S” and “L” isolates. Based on the omt12 gene region, phylogenetic structure in sclerotium phenotype and aflatoxin production was evident within group I. Some non-aflatoxin-producing isolates of group I had an omt12 allele that was identical to that found in isolates of A. oryzae.     

Expression of frutalin, an alpha-D-galactose-binding jacalin-related lectin, in the yeast Pichia pastoris

Frutalin is an α-d-galactose-binding lectin expressed in breadfruit seeds. Its isolation from plant is time-consuming and results in a heterogeneous mixture of different lectin isoforms. In order to improve and facilitate the availability of the breadfruit lectin, we cloned an optimised codifying frutalin mature sequence into the pPICZαA expression vector. This expression vector, designed for protein expression in the methylotrophic yeast Pichia pastoris, contains the Saccharomyces α-factor preprosequence to direct recombinant proteins into the secretory pathway. Soluble recombinant frutalin was detected in the culture supernatants and recognised by native frutalin antibody. Approximately 18–20 mg of recombinant lectin per litre medium was obtained from a typical small scale methanol-induced culture purified by size-exclusion chromatography. SDS–PAGE and Edman degradation analysis revealed that frutalin was expressed as a single chain protein since the four amino-acid linker peptide “T-S-S-N”, which connects α and β chains, was not cleaved. In addition, incomplete processing of the signal sequence resulted in recombinant frutalin with one Glu-Ala N-terminal repeat derived from the α-factor prosequence. Endoglycosidase treatment and SDS–PAGE analysis revealed that the recombinant frutalin was partly N-glycosylated. Further characterisation of the recombinant lectin revealed that it specifically binds to the monosaccharide Me-α-galactose presenting, nevertheless, lesser affinity than the native frutalin. Recombinant frutalin eluted from a size-exclusion chromatography column with a molecular mass of about 62–64 kDa, suggesting a tetrameric structure, however it did not agglutinate rabbit erythrocytes as native frutalin does. This work shows that the galactose-binding jacalin-related lectins four amino-acid linker peptide “T-S-S-N” does not undergo any proteolytic cleavage in the yeast P. pastoris and also that linker cleavage might not be essential for lectin sugar specificity.     

3.9 ? structure of the nucleosome core particle determined by phase-plate cryo-EM

The Volta phase plate is a recently developed electron cryo-microscopy (cryo-EM) device that enables contrast enhancement of biological samples. Here we have evaluated the potential of combining phase-plate imaging and single particle analysis to determine the structure of a small protein–DNA complex. To test the method, we made use of a 200 kDa Nucleosome Core Particle (NCP) reconstituted with 601 DNA for which a high-resolution X-ray crystal structure is known. We find that the phase plate provides a significant contrast enhancement that permits individual NCPs and DNA to be clearly identified in amorphous ice. The refined structure from 26,060 particles has an overall resolution of 3.9 Å and the density map exhibits structural features consistent with the estimated resolution, including clear density for amino acid side chains and DNA features such as the phosphate backbone. Our results demonstrate that phase-plate cryo-EM promises to become an important method to determine novel near-atomic resolution structures of small and challenging samples, such as nucleosomes in complex with nucleosome-binding factors.     

Three-Dimensional Reconstruction with Contrast Transfer Function Correction from Energy-Filtered Cryoelectron Micrographs: Procedure and Application to the 70SEscherichia coliRibosome

Cryoelectron microscopy provides the means of studying macromolecules in their native state. However, the contrast transfer function (CTF) makes the images and the three-dimensional (3D) maps derived from them difficult to interpret. We developed methods to determine the CTF from experimental data and to obtain a CTF-corrected 3D reconstruction. The CTF correction and 3D reconstruction accomplished in one step make it easy to combine different defocus data sets and decrease the error accumulation in the computation. These methods were applied to energy-filtered images of the 70SEscherichia coliribosome, resulting in a distortion-free 3D map of the ribosome at 1/24.5 Å⁻¹resolution, as determined by the differential phase residual resolution criterion.     

Evidence that aspartate-85 has a higher pK(a) in all-trans than in 13-cisbacteriorhodopsin.

Macrobdella decora hemoglobin was observed in vitreous ice by cryoelectron microscopy and subjected to three-dimensional reconstruction by the method of random conical tilt series. The refined volume has a resolution of 40 A and a D6 point-group symmetry. Its architecture, with its hexagonal bilayer appearance, resembles those of Lumbricus terrestris (oligochaete) and Eudistylia vancouverii (polychaete). When the reconstruction volume is viewed along its sixfold axis, the vertices of the upper hexagonal layer are rotated 16 degrees clockwise compared to those of the lower layer. In agreement with the "bracelet" model of Vinogradov et al., a central linker complex is decorated by 12 hollow globular substructures. The linker complex is made up of a central hexagonal toroid linked by 12 c5 connections to two bracelets of c3 connections, which are themselves linked via six c4 connections. The portion of the hollow globular substructure corresponding to the dodecamer of globin chains has a local pseudo threefold symmetry and is composed of three elongated structures visible when the volume is displayed at high threshold. The main difference between Macrobdella, Lumbricus, and Eudistylia hemoglobins is the presence in Macrobdella of a central hexagonal toroid instead of a compact flat hexagonal structure.     

Comparative analysis of proapoptotic activity of cytochrome <Emphasis Type="Italic">c</Emphasis> mutants in living cells

A non-traumatic electroporation procedure was developed to load exogenous cytochrome c into the cytoplasm and to study the apoptotic effect of cytochrome c, its K72-substitued mutants and “yeast → horse” hybrid cytochrome c in living WEHI-3 cells. The minimum apoptosis-activating intracellular concentration of horse heart cytochrome c was estimated to be 2.7 ± 0.5 μM (47 ± 9 fg/cell). The equieffective concentrations of the K72A-, K72E- and K72L-substituted mutants of cytochrome c were five-, 15- and 70-fold higher. The “yeast → horse” hybrid created by introducing S2D, K4E, A7K, T8K, and K11V substitutions (horse protein numbering) and deleting five N-terminal residues in yeast cytochrome c did not evoke apoptotic activity in mammalian cells. The apoptotic function of cytochrome c was abolished by the K72W substitution. The K72W-substituted cytochrome c possesses reduced affinity to the apoptotic protease activating factor-1 (Apaf-1) and forms an inactive complex. This mutant is competent as a respiratory-chain electron carrier and well suited for knock-in studies of cytochrome c-mediated apoptosis.     

goCTF: Geometrically optimized CTF determination for single-particle cryo-EM

Preferred particle orientation represents a recurring problem in single-particle cryogenic electron microcopy (cryo-EM). A specimen-independent approach through tilting has been attempted to increase particle orientation coverage, thus minimizing anisotropic three-dimensional (3D) reconstruction. However, focus gradient is a critical issue hindering tilt applications from being a general practice in single-particle cryo-EM. The present study describes a newly developed geometrically optimized approach, goCTF, to reliably determine the global focus gradient. A novel strategy of determining contrast transfer function (CTF) parameters from a sector of the signal preserved power spectrum is applied to increase reliability. Subsequently, per-particle based local focus refinement is conducted in an iterative manner to further improve the defocus accuracy. Novel diagnosis methods using a standard deviation defocus plot and goodness of fit heatmap have also been proposed to evaluate CTF fitting quality prior to 3D refinement. In a benchmark study, goCTF processed a published single-particle cryo-EM dataset for influenza hemagglutinin trimer collected at a 40-degree specimen tilt. The resulting 3D reconstruction map was improved from 4.1?Å to 3.7?Å resolution. The goCTF program is built on the open-source code of CTFFIND4, which adopts a consistent user interface for ease of use.     

On necessary and sufficient conditions for group selection efficacy

The statement “group selection predominates over individual selection” is formulated within a class of patch-structured models. Conditions involving both “selfish” and “altruistic” predator characteristics are then shown to be necessary and sufficient for group selection predominance in this class of models. Maynard Smith's criterion M < 1 (Group selection, Quart. Rev. Biol., June 1976, pp. 277–283) is shown to be sufficient but not necessary for group selection predominance.     

Praon Haliday (Hymenoptera: Braconidae: Aphidiinae) of Southeastern Europe: key, host range and phylogenetic relationships

A review of species in the genus Praon Haliday, 1833 is presented. Twenty described species are keyed and illustrated with scanning electron micrographs and line drawings. The Praon species presented in this work have been identified from 67 aphid taxa occurring on 120 plant taxa. Furthermore, 87 original parasitoid–aphid–plant associations of the species mentioned in the key are presented. Phylogenetic relationships among Praon species are reconstructed using parsimony and cladistic distance methods. Praon abjectum is the sister taxon to the remaining Praon species. We recognized three species group: “Parapraon”, “dorsale-yomenae” and “rosaecola”. Monophyly is suggested for “Parapraon” species group and paraphyly for “dorsale-yomenae” group. Finally, by phylogenetic reconstruction, a close phylogenetic relationship between “Parapraon” and “dorsale-yomenae” species group was found.     

Structure of HIV-1 Capsid Assemblies by Cryo-electron Microscopy and Iterative Helical Real-space Reconstruction

Cryo-electron microscopy (cryo-EM), combined with image processing, is an increasingly powerful tool for structure determination of macromolecular protein complexes and assemblies. In fact, single particle electron microscopy¹ and two-dimensional (2D) electron crystallography² have become relatively routine methodologies and a large number of structures have been solved using these methods. At the same time, image processing and three-dimensional (3D) reconstruction of helical objects has rapidly developed, especially, the iterative helical real-space reconstruction (IHRSR) method³, which uses single particle analysis tools in conjunction with helical symmetry. Many biological entities function in filamentous or helical forms, including actin filaments⁴, microtubules⁵, amyloid fibers⁶, tobacco mosaic viruses⁷, and bacteria flagella⁸, and, because a 3D density map of a helical entity can be attained from a single projection image, compared to the many images required for 3D reconstruction of a non-helical object, with the IHRSR method, structural analysis of such flexible and disordered helical assemblies is now attainable.In this video article, we provide detailed protocols for obtaining a 3D density map of a helical protein assembly (HIV-1 capsid⁹ is our example), including protocols for cryo-EM specimen preparation, low dose data collection by cryo-EM, indexing of helical diffraction patterns, and image processing and 3D reconstruction using IHRSR. Compared to other techniques, cryo-EM offers optimal specimen preservation under near native conditions. Samples are embedded in a thin layer of vitreous ice, by rapid freezing, and imaged in electron microscopes at liquid nitrogen temperature, under low dose conditions to minimize the radiation damage. Sample images are obtained under near native conditions at the expense of low signal and low contrast in the recorded micrographs. Fortunately, the process of helical reconstruction has largely been automated, with the exception of indexing the helical diffraction pattern. Here, we describe an approach to index helical structure and determine helical symmetries (helical parameters) from digitized micrographs, an essential step for 3D helical reconstruction. Briefly, we obtain an initial 3D density map by applying the IHRSR method. This initial map is then iteratively refined by introducing constraints for the alignment parameters of each segment, thus controlling their degrees of freedom. Further improvement is achieved by correcting for the contrast transfer function (CTF) of the electron microscope (amplitude and phase correction) and by optimizing the helical symmetry of the assembly.     

Photosynthetic characteristics of the economic brown seaweed <Emphasis Type="BoldItalic">Hizikia fusiforme</Emphasis> (Sargassaceae,Phaeophyta), with special reference to its “leaf” and receptacle

Photosynthetic responses to irradiance and temperature of “leaves” and receptacles were compared in February (vegetative stage) and May (reproductive stage) in the seaweed, Hizikia fusiforme (Harvey) Okamura (Sargassaceae, Phaeophyta) from Nanao Island, Shantou, China. Irradiance-saturated photosynthesis (P_max) was significantly higher in receptacles than in “leaves” on a fresh weight basis, and that of “leaves” was greater in May than in February at ambient seawater temperatures. The optimum temperature for P_max was 30^∘C for both “leaves” and receptacles, being 5–10^∘C higher than the ambient seawater temperature. The apparent photosynthetic efficiencies were greater in receptacles than in “leaves” within the tested temperature range of 10–40^∘C. The irradiance for saturating photosynthesis for both “leaves” and receptacles was temperature-dependent, with the highest values (about 200μmolphotonsm⁻²s⁻¹) at 30^∘C.     

Cryo-EM structures of human m6A writer complexes

N⁶-methyladenosine (m⁶A) is the most abundant ribonucleotide modification among eukaryotic messenger RNAs. The m⁶A “writer” consists of the catalytic subunit m⁶A-METTL complex (MAC) and the regulatory subunit m⁶A-METTL-associated complex (MACOM), the latter being essential for enzymatic activity. Here, we report the cryo-electron microscopy (cryo-EM) structures of MACOM at a 3.0-Å resolution, uncovering that WTAP and VIRMA form the core structure of MACOM and that ZC3H13 stretches the conformation by binding VIRMA. Furthermore, the 4.4-Å resolution cryo-EM map of the MACOM–MAC complex, combined with crosslinking mass spectrometry and GST pull-down analysis, elucidates a plausible model of the m⁶A writer complex, in which MACOM binds to MAC mainly through WTAP and METTL3 interactions. In combination with in vitro RNA substrate binding and m⁶A methyltransferase activity assays, our results illustrate the molecular basis of how MACOM assembles and interacts with MAC to form an active m⁶A writer complex.Subject terms: Post-translational modifications, Cryoelectron microscopy     

The structure of Escherichia coli membranes studied by fluorescence measurements of lipid phase transitions

Lipid phase transitions in Escherichia coli membranes and in dispersions of the extracted lipids were studied using the negatively charged fluorescence probe 1-anilinonaphthalene-8-sulfonate (ANS⁻) and the hydrophobic fluorescence probe N-phenyl-1-naphthylamine (NPN). The fluorescence change, ΔI, at the phase transition approaches a limiting value (ΔI)_lim with increasing dye concentration. A comparison of the limiting values (Δ)_lim^NPN obtained for membranes and the lipid standard allows us to estimate the lipid fraction, ρ, in the membrane that takes part in the phase transition (ρ = 80%). The same procedure carried out with ANS⁻ yields a value of 42.5% for the lipid fraction that is accessible from the aqueous phase. These values, combined with published freeze-etching data for the particle density within the fracture plane of membranes are used to quantify the Davson-Danielli-Robertson-Benson-Singer membrane model which assumes a fluid lipid bilayer with “integral” proteins embedded in the lipid matrix and surface proteins attached to the lipid head groups. It appears that on the average one “integral” membrane protein is surrounded by about 600 lipid molecules and that about 130 of these molecules are closely coupled to the protein molecule, forming an halo in which the chain-chain interaction between the lipids is disturbed. About half of the bilayer surface is covered with proteins; part of these seem to be stacked.     

The phylogeny of the genus Ischioscia Verhoeff, 1928, with redescriptions of three species (Crustacea: Isopoda: Oniscidea)

The genus Ischioscia Verhoeff, 1928 is reviewed. 26 species are considered valid. A key for their identification is given, as well as a map showing the geographic distribution. The known range of the genus covers a large area from the central Amazon region to the mountains of Guatemala. The species of Ischioscia have a typical “philosciid” habitus (“runner” type); they can be distinguished from other Neotropical species with similar habitus by the following apomorphies: (1) male pereiopod 1 carpus enlarged to a plate-like extension, (2) scale field on male pereiopod 1 covering entire frontal side of the carpus, (3) male pereiopod 7 ischium with a ventral scale field, (4) dactylus in both sexes with a long inner claw. The groundpattern of Ischioscia is reconstructed, and an analysis of the phylogenetic relations within the genus is made on the basis of morphological data. The species are very similar to each other, most differences are found in the male structures of sexually dimorphic features. Ischioscia sturmi (Vandel, 1972), I. amazonica Lemos de Castro, 1955 and I. bolivari Vandel, 1968 are redescribed in detail.     

Three-dimensional reconstruction of Lumbricus terrestris hemoglobin at 22 A resolution: intramolecular localization of the globin and linker chains.

A 3D reconstruction of the hemoglobin (Hb) of the earthworm Lumbricus terrestris was carried out by the 3D projection alignment method from electron microscopy images of a frozen-hydrated specimen at 22 A resolution. The results were analyzed by a new approach taking into account the evolution of the 210 densities forming the 3D volume as a function of the threshold of surface representation. The whole oligomer with D6point-group symmetry is comprised of 12 hollow globular substructures (HGS) with local 3-fold symmetry tethered to a complex network of linking subunits (linker complex). The 12 globin subunits of each HGS are distributed around local 3-fold axis in four layers of three subunits. The first layer, the most external, contains monomeric globin chains 2A, 3A, and 5A. The three trimers corresponding to the nine remaining subunits have one subunit in each of the second (2B, 3B, 5B), third (1A, 4A, 6A), and fourth (1B, 4B, 6B) layer. The distances between the centers of the globin chains forming the trimers are in the ranges 20-32 A and 45-52 A. The linker complex is made up of two types of linking units. The first type forms three loops connecting globin chains of the second, third and fourth layers. The average molecular mass (Mm) of these subunits was 25 kDa. The second type forms the central structure, termed hexagonal toroid, and its 12 connections to the HGS. This structure corresponds to a hexamer of a single linking unit with a Mm (31.2 kDa), size and a shape different from those of the HGS loops. A careful study of 3D volume architecture shows that each toroid linking unit is bound to the three loops of a HGS pair located in the upper and lower hexagonal layers, respectively. As shown in a model of architecture, hexagonal bilayered (HBL) Hbs can be built very simply from 144 globin chains and 42 linker chains belonging to two different types. We also propose a simple assembly sequence for the construction of HBL Hbs based on the architecture model.     

Seasonal occurrence of silicoflagellate morphologies in different environments of the eastern Pacific Ocean

Data on weekly to bimonthly particle flux collected by sediment traps in three environments show that forms of silicoflagellates do not have a simple and consistent relationship to either temperature or productivity of the overlying water column. Sites were located in the fjords of British Columbia, along a transect off the coast of southern Oregon, and in San Pedro Basin of the Southern California Bight. Either the “cool”Distephanus speculum or the “warm”Dictyocha messanensis may dominate at temperatures over a range from 10–19°C.D. speculum dominated high-productivity periods off Oregon, whileD. messanensis dominated during coastal upwelling events in the San Pedro Basin, regardless of surface temperature.Octactis pulchra showed no distinctive trend in the San Pedro Basin, the only locality where it was observed. The isolated presence ofD. speculum in the fjords, where mixed-zone salinity may be as low as 11‰, indicates a tolerance for hyposaline waters, but no other trends could be defined with respect to surface salinity.