Interactions of the 18.5 kDA isoform of myelin basic protein with a2+-calmodulin: In vitro studies using gel shift assay

The interactions of the 18.5 kDa isoform of myelin basic protein (MBP) with calmodulin (CaM) in vitro have been investigated using glutaraldehyde or dithiobis[succinimidylpropionate] (DSP) cross-linking, and SDS-polyacrylamide gel electrophoresis. The following forms of MBP were used: the natural bovine C1 charge isomer (bMBP/C1) and a recombinant murine product (rmMBP), and their fragments generated by digestion with cathepsin D (EC 3.4.23.5). In physiological buffers (10 mM HEPES-NaOH, pH 7.4, 5 mM CaCl₂, 0.0035% glutaraldehyde; or 50 mM HEPES-NaOH, pH 7.4, 100 mM NaCl, 1 mM CaCl₂, 0.0035% DSP), MBP and CaM interacted primarily in a 1:1 molar ratio, consistent with previous studies that used 6 M urea, i.e. denaturing conditions. Moreover, the appearance of higher-order bands (not previously observed) suggested that the mechanism of interaction of the two proteins involved a series of relatively complex equilibria, resulting in 2:1 ratios of MBP to CaM. This observation would explain the cooperativity of association inferred from fluorescence studies [13]. Our results demonstrated further that the interaction involved the C-terminal domain of MBP, again in a primarily 1:1 molar ratio with CaM, consistent with our identification of a CaM-binding motif at the C-terminus.     

Interactions of the 18.5-kDa isoform of myelin basic protein with Ca(2+)-calmodulin: in vitro studies using fluorescence microscopy and spectroscopy.

The interactions of the 18.5-kDa isoform of myelin basic protein (MBP) with calmodulin (CaM) in vitro have been investigated using fluorescence microscopy and spectroscopy. Two forms of MBP were used: the natural bovine C1 charge isomer (bMBP/C1) and a hexahistidine-tagged recombinant murine product (rmMBP), with only minor differences in behaviour being observed. Fragments of each protein generated by digestion with cathepsin D (EC 3.4.23.5) were also evaluated. Using fluorescence microscopy, it was shown that MBP and CaM interacted in the presence of Ca2+ under a variety of conditions, including high urea and salt concentrations, indicating that the interaction was specific and not merely electrostatic in nature. Using cathepsin D digestion fragments of MBP, it was further shown that the carboxyl-terminal domain of MBP interacted with Ca(2+)-CaM, consistent with our theoretical prediction. Spectroscopy of the intrinsic fluorescence of the sole Trp residue of MBP showed that binding was cooperative in nature. The dissociation constants for formation of a 1:1 MBP-Ca(2+)-CaM complex were determined to be 2.1 +/- 0.1 and 2.0 +/- 0.2 microM for bMBP/C1 and rmMBP, respectively. Fluorescence spectroscopy using cathepsin D digestion fragments indicated also that the carboxyl-terminal region of each protein interacted with Ca(2+)-CaM, with dissociation constants of 1.8 +/- 0.2 and 2.8 +/- 0.9 microM for the bMBP/C1 and rmMBP fragments, respectively. These values show a roughly 1000-fold lower affinity of MBP for CaM than other CaM-binding peptides, such as myristoylated alanine-rich C-kinase substrate, that are involved in signal transduction.     

Structural analysis of the complex between calmodulin and full-length myelin basic protein, an intrinsically disordered molecule

Myelin basic protein (MBP) is present between the cytoplasmic leaflets of the compact myelin membrane in both the peripheral and central nervous systems, and characterized to be intrinsically disordered in solution. One of the best-characterized protein ligands for MBP is calmodulin (CaM), a highly acidic calcium sensor. We pulled down MBP from human brain white matter as the major calcium-dependent CaM-binding protein. We then used full-length brain MBP, and a peptide from rodent MBP, to structurally characterize the MBP–CaM complex in solution by small-angle X-ray scattering, NMR spectroscopy, synchrotron radiation circular dichroism spectroscopy, and size exclusion chromatography. We determined 3D structures for the full-length protein–protein complex at different stoichiometries and detect ligand-induced folding of MBP. We also obtained thermodynamic data for the two CaM-binding sites of MBP, indicating that CaM does not collapse upon binding to MBP, and show that CaM and MBP colocalize in myelin sheaths. In addition, we analyzed the post-translational modifications of rat brain MBP, identifying a novel MBP modification, glucosylation. Our results provide a detailed picture of the MBP–CaM interaction, including a 3D model of the complex between full-length proteins.     

Erratum to: Structural analysis of the complex between calmodulin and full-length myelin basic protein, an intrinsically disordered molecule

Myelin basic protein (MBP) is present between the cytoplasmic leaflets of the compact myelin membrane in both the peripheral and central nervous systems, and characterized to be intrinsically disordered in solution. One of the best-characterized protein ligands for MBP is calmodulin (CaM), a highly acidic calcium sensor. We pulled down MBP from human brain white matter as the major calcium-dependent CaM-binding protein. We then used full-length brain MBP, and a peptide from rodent MBP, to structurally characterize the MBP–CaM complex in solution by small-angle X-ray scattering, NMR spectroscopy, synchrotron radiation circular dichroism spectroscopy, and size exclusion chromatography. We determined 3D structures for the full-length protein–protein complex at different stoichiometries and detect ligand-induced folding of MBP. We also obtained thermodynamic data for the two CaM-binding sites of MBP, indicating that CaM does not collapse upon binding to MBP, and show that CaM and MBP colocalize in myelin sheaths. In addition, we analyzed the post-translational modifications of rat brain MBP, identifying a novel MBP modification, glucosylation. Our results provide a detailed picture of the MBP–CaM interaction, including a 3D model of the complex between full-length proteins.     

Spectroscopic characterization of the calmodulin-binding and autoinhibitory domains of calcium/calmodulin-dependent protein kinase I

Structural studies of the calmodulin-dependent protein kinase I have shown how the calmodulin-binding domain and autoinhibitory domain interact with the active sites of the enzyme. In this work, we have studied the interaction in solution of two synthetic short and long (22- and 37-residue) peptides representing the binding and autoinhibitory domains of CaMKI with Ca2+-CaM using CD, NMR, and EPR spectroscopy. Both peptides adopt alpha-helical structure when bound to Ca2+-CaM, as detected by CD spectroscopy. Cadmium-113 NMR showed that both peptides induced cooperativity in metal ion binding between the two lobes of the protein. To directly observe the effect of the peptides upon CaM in solution, biosynthetically isotope labeled [methyl-13C-Met]CaM was prepared and studied by 1H, 13C NMR. The relaxation effects of two nitroxide spin-labeled derivatives of the short peptide showed the N-terminal portion of the CaM-binding domain interacting with the C-lobe of CaM, while the C-lobe of the peptide binds to the N-lobe of CaM. Our results are consistent with Trp303 and Met316 acting as the anchoring residues for the C- and N-lobes of CaM, respectively. The NMR spectra of the long peptide showed further differences, suggesting that additional interactions may exist between the autoinhibitory domain and CaM.     

Interaction of the 18.5-kD isoform of myelin basic protein with Ca2+ -calmodulin: effects of deimination assessed by intrinsic Trp fluorescence spectroscopy,dynamic light scattering,and circular dichroism

The effects of deimination (conversion of arginyl to citrullinyl residues) of myelin basic protein (MBP) on its binding to calmodulin (CaM) have been examined. Four species of MBP were investigated: unmodified recombinant murine MBP (rmMBP-Cit(0)), an engineered protein with six quasi-citrullinyl (i.e., glutaminyl) residues per molecule (rmMBP-qCit(6)), human component C1 (hMBP-Cit(0)), and human component C8 (hMBP-Cit(6)), both obtained from a patient with multiple sclerosis (MS). Both rmMBP-Cit(0) and hMBP-Cit(0) bound CaM in a Ca(2+)-dependent manner and primarily in a 1:1 stoichiometry, which was verified by dynamic light scattering. Circular dichroic spectroscopy was unable to detect any changes in secondary structure in MBP upon CaM-binding. Inherent Trp fluorescence spectroscopy and a single-site binding model were used to determine the dissociation constants: K(d) = 144 +/- 76 nM for rmMBP-Cit(0), and K(d) = 42 +/- 15 nM for hMBP-Cit(0). For rmMBP-qCit(6) and hMBP-Cit(6), the changes in fluorescence were suggestive of a two-site interaction, although the dissociation constants could not be accurately determined. These results can be explained by a local conformational change induced in MBP by deimination, exposing a second binding site with a weaker association with CaM, or by the existence of several conformers of deiminated MBP. Titration with the collisional quencher acrylamide, and steady-state and lifetime measurements of the fluorescence at 340 nm, showed both dynamic and static components to the quenching, and differences between the unmodified and deiminated proteins that were also consistent with a local conformational change due to deimination.     

Spectroscopic characterization of the interaction between calmodulin-dependent protein kinase I and calmodulin

Calmodulin-dependent protein kinase I (CaM kinase I) is a member of the expanding class of protein kinases that are regulated by calmodulin (CaM). Its putative CaM-binding region is believed to occur within a 22-residue sequence (amino acids 299-320). This sequence was chemically synthesized and utilized for CaM interaction studies. Gel band shift assays and densitometry experiments with intact CaM kinase I and the CaM-binding domain peptide (CaMKIp) reveal that they bind in an analogous manner, giving rise to 1:1 complexes. Fluorescence analysis using dansyl-CaM showed that conformational changes in CaM on binding CaM kinase I or CaMKIp were nearly identical, suggesting that the peptide mimicked the CaM-binding ability of the intact protein. In the presence of CaM, the peptide displays an enhancement of its unique Trp fluorescence as well as a marked blue shift of the emission maximum, reflecting a transfer to a more rigid, less polar environment. Quenching studies, using acrylamide, confirmed that the Trp in the peptide on binding CaM is no longer freely exposed to solvent as is the case for the free peptide. Studies with a series of Met mutants of CaM showed that the Trp-containing N-terminal end of CaMKIp was bound to the C-terminal lobe of CaM. Near-UV CD spectra also indicate that the Trp of the peptide and Phe residues of the protein are involved in the binding. These results show that the CaM-binding domain of CaM kinase I binds to CaM in a manner analogous to that of myosin light chain kinase.     

Solution X-ray scattering reveals a novel structure of calmodulin complexed with a binding domain peptide from the HIV-1 matrix protein p17

The solution structures of complexes between calcium-saturated calmodulin (Ca (2+)/CaM) and a CaM-binding domain of the HIV-1 matrix protein p17 have been determined by small-angle X-ray scattering with use of synchrotron radiation as an intense and stable X-ray source. We used three synthetic peptides of residues 11-28, 26-47, and 11-47 of p17 to demonstrate the diversity of CaM-binding conformation. Ca (2+)/CaM complexed with residues 11-28 of p17 adopts a dumbbell-like structure at a molar ratio of 1:2, suggesting that the two peptides bind each lobe of CaM, respectively. Ca (2+)/CaM complexed with residues 26-47 of p17 at a molar ratio of 1:1 adopts a globular structure similar to the NMR structure of Ca (2+)/CaM bound to M13, which adopted a compact globular structure. In contrast to these complexes, Ca (2+)/CaM binds directly with both CaM-binding sites of residues 11-47 of p17 at a molar ratio of 1:1, which induces a novel structure different from known structures previously reported between Ca (2+)/CaM and peptide. A tertiary structural model of the novel structure was constructed using the biopolymer module of Insight II 2000 on the basis of the scattering data. The two domains of CaM remain essentially unchanged upon complexation. The hinge motions, however, occur in a highly flexible linker of CaM, in which the electrostatic residues 74Arg, 78Asp, and 82Glu interact with N-terminal electrostatic residues of the peptide (residues 12Glu, 15Arg, and 18Lys). The acidic residues in the N-terminal domain of CaM interact with basic residues in a central part of the peptide, thereby enabling the central part to change the conformations, while an acidic residue in the C-terminal domain interacts with two basic residues in the two helical sites of the peptide. The overall structure of the complex adopts an extended structure with the radius of gyration of 20.5 A and the interdomain distance of 34.2 A. Thus, the complex is principally stabilized by electrostatic interactions. The hydrophobic patches of Ca (2+)/CaM are not responsible for the binding with the hydrophobic residues in the peptide, suggesting that CaM plays a role to sequester the myristic acid moiety of p17.     

Effect of arginine loss in myelin basic protein, as occurs in its deiminated charge isoform, on mediation of actin polymerization and actin binding to a lipid membrane in vitro

Myelin basic protein (MBP) binds to negatively charged lipids on the cytosolic surface of oligodendrocyte membranes and is most likely responsible for adhesion of these surfaces in the multilayered myelin sheath. It can also polymerize actin, bundle F-actin filaments, and bind actin filaments to lipid bilayers through electrostatic interactions. MBP consists of a number of posttranslationally modified isoforms of varying charge, including C8, in which six arginines are deiminated to the uncharged residue citrulline. The deiminated form decreases with development, but is increased in patients with the demyelinating disease multiple sclerosis. Here we investigate the effect of decreased net positive charge of MBP on its interaction with actin in vitro by comparing a recombinant murine form, rmC1, of the most highly charged unmodified isoform, C1, and a recombinant analogue of C8 in which six basic residues are converted to glutamine, rmC8. The dissociation constant of the less charged isoform rmC8 for actin was a little greater than that of rmC1, and rmC8 had somewhat reduced ability to polymerize actin and bundle F-actin filaments than rmC1. Moreover, rmC8 was more readily dissociated from actin by Ca(2+)-calmodulin than rmC1, and the ability of the deiminated isoform to bind actin to lipid bilayers was reduced. These results indicate that electrostatic forces are the primary determinant of the interaction of MBP with actin. The spin labeled side chains of a series of rmC1 and rmC8 variants containing single Cys substitutions at seven sites throughout the sequence all became motionally restricted to a similar degree on binding F-actin, indicating that the entire sequence is involved in interacting with actin filaments or is otherwise structurally constrained in actin bundles. Thus, this posttranslational modification of MBP, which occurs early in life and is increased in multiple sclerosis, attenuates the ability of MBP to polymerize and bundle actin, and to bind it to a negatively charged membrane.     

Lateral self-assembly of 18.5-kDa myelin basic protein (MBP) charge component-C1 on membranes

Myelin basic protein (MBP), particularly the classic 18.5-kDa isoform, is a major structural protein of the myelin sheath of the central nervous system. It is an intrinsically disordered, peripheral membrane protein that shows structural polymorphism in combination with several overlapping interaction sites. Here, double electron-electron resonance (DEER) spectroscopy, in combination with a simplified, semi-quantitative analysis based on Monte Carlo simulations, is used to determine the distance distribution of murine 18.5-kDa MBP, unmodified charge component-C1, on large unilamellar vesicles of a lipid composition mimicking the cytoplasmic leaflet of myelin. Three singly spin-labeled MBP variants and a mixture of singly-labeled MBP variants are used. The MBPs, each bearing only one spin label, exhibit average intermolecular distances that are significantly shorter than the distances expected when assuming a random distribution at the employed lipid-to-protein ratios, indicating self-assembly on the membrane. The distribution of elliptical pervaded areas (hard ellipses) on a two-dimensional surface can serve as a model of the nonspecific self-assembly process. The corresponding pair correlation functions g(r) are determined from Monte Carlo simulations with variation of various parameters such as the ellipses' aspect ratios. Comparing the g(r) values with the DEER-derived distance distributions, the pervaded volume is best characterized by a nearly elliptical projection onto the membrane, with an aspect ratio of approximately 1.5, and with the longer semi-axis of approximately 1.4nm. The approach of using local information from DEER with low-resolution models derived from Monte Carlo simulations can be applied to study the lateral self-assembly properties of other protein complexes on membranes.     

A systematic assessment of mature MBP in membrane protein production: overexpression, membrane targeting and purification

Obtaining enough membrane protein in native or native-like status is still a challenge in membrane protein structure biology. Maltose binding protein (MBP) has been widely used as a fusion partner in improving membrane protein production. In the present work, a systematic assessment on the application of mature MBP (mMBP) for membrane protein overexpression and purification was performed on 42 membrane proteins, most of which showed no or poor expression level in membrane fraction fused with an N-terminal Histag. It was found that most of the small membrane proteins were overexpressed in the native membrane of Escherichia coli when using mMBP. In addition, the proteolysis of the fusions were performed on the membrane without solubilization with detergents, leading to the development of an efficient protocol to directly purify the target membrane proteins from the membrane fraction through a one-step affinity chromatography. Our results indicated that mMBP is an excellent fusion partner for overexpression, membrane targeting and purification of small membrane proteins. The present expression and purification method may be a good solution for the large scale preparation of small membrane proteins in structural and functional studies.     

Nitric-oxide synthase (NOS) reductase domain models suggest a new control element in endothelial NOS that attenuates calmodulin-dependent activity

Inducible (iNOS) and constitutive (eNOS, nNOS) nitric-oxide synthases differ in their Ca2+-calmodulin (CaM) dependence. iNOS binds CaM irreversibly but eNOS and nNOS, which bind CaM reversibly, have inserts in their reductase domains that regulate electron transfer. These include the 43-45-amino acid autoinhibitory element (AI) that attenuates electron transfer in the absence of CaM, and the C-terminal 20-40-amino acid tail that attenuates electron transfer in a CaM-independent manner. We constructed models of the reductase domains of the three NOS isoforms to predict the structural basis for CaM-dependent regulation. We have identified and characterized a loop (CD2A) within the NOS connecting domain that is highly conserved by isoform and that, like the AI element, is within direct interaction distance of the CaM binding region. The eNOS CD2A loop (eCD2A) has the sequence 834KGSPGGPPPG843, and is truncated to 809ESGSY813 (iCD2A) in iNOS. The eCD2A contributes to the Ca2+ dependence of CaM-bound activity to a level similar to that of the AI element. The eCD2A plays an autoinhibitory role in the control of NO, and CaM-dependent and -independent reductase activity, but this autoinhibitory function is masked by the dominant AI element. Finally, the iCD2A is involved in determining the salt dependence of NO activity at a post-flavin reduction level. Electrostatic interactions between the CD2A loop and the CaM-binding region, and CaM itself, provide a structural means for the CD2A to mediate CaM regulation of intra-subunit electron transfer within the active NOS complex.     

Regulation of a recombinant pea nuclear apyrase by calmodulin and casein kinase II

A cDNA encoding a pea nuclear apyrase was previously cloned. Overexpressions of a full-length and a truncated cDNA have been successfully expressed in Escherichia coli BL21(DE3). The resulting fusion proteins, apyrase and the C-terminus (residues 315-453) of apyrase, were used for calmodulin (CaM) binding and phosphorylation studies. Fusion protein apyrase but not the C-terminus of apyrase can be recognized by polyclonal antibody pc480. This suggested that the motif recognized by pc480 was located in the N-terminal region of apyrase. The recombinant apyrase protein also showed an activity 70 times higher than that of endogenous apyrase using ATP as a substrate. The recombinant apyrase has a preference for ATP more than other nucleoside triphosphate substrates. CaM can bind to recombinant apyrase, but not to the C-terminus of apyrase. This implies that the CaM-binding domain must be in the first 315 amino acids of the N-terminal region of apyrase. We found that one segment from residue 293 to 308 was a good candidate for the CaM-binding domain. This segment 293 FNKCKNTIRKALKLNY 308 has a basic amphiphilic-helical structure, which shows the predominance of basic residues on one side and hydrophobic residues on the other when displayed on a helical wheel plot. Using the gel mobility shift binding assay, this synthetic peptide was shown to bind to CaM, indicating that it is the CaM-binding domain. Both recombinant apyrase and the C-terminus of apyrase can be phosphorylated by a recombinant human protein kinase CKII. Phosphorylation does not affect CaM binding to recombinant apyrase. However, CaM does inhibit CKII phosphorylation of recombinant apyrase and this inhibition can be blocked by 5 mM EGTA.     

Substitution of the methionine residues of calmodulin with the unnatural amino acid analogs ethionine and norleucine: biochemical and spectroscopic studies

Calmodulin (CaM) is a 148-residue regulatory calcium-binding protein that activates a wide range of target proteins and enzymes. Calcium-saturated CaM has a bilobal structure, and each domain has an exposed hydrophobic surface region where target proteins are bound. These two "active sites" of calmodulin are remarkably rich in Met residues. Here we have biosynthetically substituted (up to 90% incorporation) the unnatural amino acids ethionine (Eth) and norleucine (Nle) for the nine Met residues of CaM. The substituted proteins bind in a calcium-dependent manner to hydrophobic matrices and a synthetic peptide, encompassing the CaM-binding domain of myosin light-chain kinase (MLCK). Infrared and circular dichroism spectroscopy show that there are essentially no changes in the secondary structure of these proteins compared to wild-type CaM (WT-CaM). One- and two-dimensional NMR studies of the Eth-CaM and Nle-CaM proteins reveal that, while the core of the proteins is relatively unaffected by the substitutions, the two hydrophobic interaction surfaces adjust to accommodate the Eth and Nle residues. Enzyme activation studies with MLCK show that Eth-CaM and Nle-CaM activate the enzyme to 90% of its maximal activity, with little changes in dissociation constant. For calcineurin only 50% activation was obtained, and the K(D) for Nle-CaM also increased 3.5-fold compared with WT-CaM. These data show that the "active site" Met residues of CaM play a distinct role in the activation of different target enzymes, in agreement with site-directed mutagenesis studies of the Met residues of CaM.     

Differential binding of calmodulin domains to constitutive and inducible nitric oxide synthase enzymes

Calmodulin (CaM) is a Ca2+ signal transducing protein that binds and activates many cellular enzymes with physiological relevance, including the mammalian nitric oxide synthase (NOS) isozymes: endothelial NOS (eNOS), neuronal NOS (nNOS), and inducible NOS (iNOS). The mechanism of CaM binding and activation to the iNOS enzyme is poorly understood in part due to the strength of the bound complex and the difficulty of assessing the role played by regions outside of the CaM-binding domain. To further elucidate these processes, we have developed the methodology to investigate CaM binding to the iNOS holoenzyme and generate CaM mutant proteins selectively labeled with fluorescent dyes at specific residues in the N-terminal lobe, C-terminal lobe, or linker region of the protein. In the present study, an iNOS CaM coexpression system allowed for the investigation of CaM binding to the holoenzyme; three different mutant CaM proteins with cysteine substitutions at residues T34 (N-domain), K75 (central linker), and T110 (C-domain) were fluorescently labeled with acrylodan or Alexa Fluor 546 C5-maleimide. These proteins were used to investigate the differential association of each region of CaM with the three NOS isoforms. We have also N-terminally labeled an iNOS CaM-binding domain peptide with dabsyl chloride in order to perform FRET studies between Alexa-labeled residues in the N- and C-terminal domains of CaM to determine CaM's orientation when associated to iNOS. Our FRET results show that CaM binds to the iNOS CaM-binding domain in an antiparallel orientation. Our steady-state fluorescence and circular dichroism studies show that both the N- and C-terminal EF hand pairs of CaM bind to the CaM-binding domain peptide of iNOS in a Ca2+-independent manner; however, only the C-terminal domain showed large Ca2+-dependent conformational changes when associated with the target sequence. Steady-state fluorescence showed that Alexa-labeled CaM proteins are capable of binding to holo-iNOS coexpressed with nCaM, but this complex is a transient species and can be displaced with the addition of excess CaM. Our results show that CaM does not bind to iNOS in a sequential manner as previously proposed for the nNOS enzyme. This investigation provides additional insight into why iNOS remains active even under basal levels of Ca2+ in the cell.     

Tryptophan fluorescence of calmodulin binding domain peptides interacting with calmodulin containing unnatural methionine analogues

The interactions between the abundant methionine residues of the calcium regulatory protein calmodulin (CaM) and several of its binding targets were probed using fluorescence spectroscopy. Tryptophan steady-state fluorescence from peptides encompassing the CaM-binding domains of the target proteins myosin light chain kinase (MLCK), cyclic nucleotide phosphodiesterase (PDE) and caldesmon site A and B (CaD A, CaD B), and the model peptide melittin showed Ca(2+)-dependent blue-shifts in their maximum emission wavelength when complexed with wild-type CaM. Blue-shifts were also observed for complexes in which the CaM methionine residues were replaced by selenomethionine, norleucine and ethionine, and when a quadruple methionine to leucine C-terminal mutant of CaM was studied. Quenching of the tryptophan fluorescence intensity was observed with selenomethionine, but not with norleucine or ethionine substituted protein. Fluorescence quenching studies with added potassium iodide (KI) demonstrate that the non-native proteins limit the solvent accessibility of the Trp in the MLCK peptide to levels close to that of the wild-type CaM-MLCK interaction. Our results show that the methionine residues from CaM are highly sensitive to the target peptide in question, confirming the importance of their role in binding interactions. In addition, we provide evidence that the nature of binding in the CaM-CaD B complex is unique compared with the other complexes studied, as the Trp residue of this peptide remains partially solvent exposed upon binding to CaM.     

Calmodulin’s flexibility allows for promiscuity in its interactions with target proteins and peptides

The small bilobal calcium regulatory protein calmodulin (CaM) activates numerous target enzymes in response to transient changes in intracellular calcium concentrations. Binding of calcium to the two helix-loop-helix calcium-binding motifs in each of the globular domains induces conformational changes that expose a methionine-rich hydrophobic patch on the surface of each domain of the protein, which it uses to bind to peptide sequences in its target enzymes. Although these CaM-binding domains typically have little sequence identity, the positions of several bulky hydrophobic residues are often conserved, allowing for classification of CaM-binding domains into recognition motifs, such as the 1–14 and 1–10 motifs. For calcium-independent binding of CaM, a third motif known as the IQ motif is also common. Many CaM-peptide complexes have globular conformations, where CaM’s central linker connecting the two domains unwinds, allowing the protein to wrap around a single predominantly α-helical target peptide sequence. However, novel structures have recently been reported where the conformation of CaM is highly dissimilar to these globular complexes, in some instances with less than a full compliment of bound calcium ions, as well as novel stoichiometries. Furthermore, many divergent CaM isoforms from yeast and plant species have been discovered with unique calcium-binding and enzymatic activation characteristics compared to the single CaM isoform found in mammals.     

Structure of the complex of calmodulin with the target sequence of calmodulin-dependent protein kinase I: studies of the kinase activation mechanism

Calcium-saturated calmodulin (CaM) directly activates CaM-dependent protein kinase I (CaMKI) by binding to a region in the C-terminal regulatory sequence of the enzyme to relieve autoinhibition. The structure of CaM in a high-affinity complex with a 25-residue peptide of CaMKI (residues 294-318) has been determined by X-ray crystallography at 1.7 A resolution. Upon complex formation, the CaMKI peptide adopts an alpha-helical conformation, while changes in the CaM domain linker enable both its N- and C-domains to wrap around the peptide helix. Target peptide residues Trp-303 (interacting with the CaM C-domain) and Met-316 (with the CaM N-domain) define the mode of binding as 1-14. In addition, two basic patches on the peptide form complementary charge interactions with CaM. The CaM-peptide affinity is approximately 1 pM, compared with 30 nM for the CaM-kinase complex, indicating that activation of autoinhibited CaMKI by CaM requires a costly energetic disruption of the interactions between the CaM-binding sequence and the rest of the enzyme. We present biochemical and structural evidence indicating the involvement of both CaM domains in the activation process: while the C-domain exhibits tight binding toward the regulatory sequence, the N-domain is necessary for activation. Our crystal structure also enables us to identify the full CaM-binding sequence. Residues Lys-296 and Phe-298 from the target peptide interact directly with CaM, demonstrating overlap between the autoinhibitory and CaM-binding sequences. Thus, the kinase activation mechanism involves the binding of CaM to residues associated with the inhibitory pseudosubstrate sequence.     

The neuronal voltage-dependent sodium channel type II IQ motif lowers the calcium affinity of the C-domain of calmodulin

Calmodulin (CaM) is the primary calcium sensor in eukaryotes. Calcium binds cooperatively to pairs of EF-hand motifs in each domain (N and C). This allows CaM to regulate cellular processes via calcium-dependent interactions with a variety of proteins, including ion channels. One neuronal target is NaV1.2, voltage-dependent sodium channel type II, to which CaM binds via an IQ motif within the NaV1.2 C-terminal tail (residues 1901-1938) [Mori, M., et al. (2000) Biochemistry 39, 1316-1323]. Here we report on the use of circular dichroism, fluorescein emission, and fluorescence anisotropy to study the interaction between CaM and NaV1.2 at varying calcium concentrations. At 1 mM MgCl2, both full-length CaM (CaM1-148) and a C-domain fragment (CaM76-148) exhibit tight (nanomolar) calcium-independent binding to the NaV1.2 IQ motif, whereas an N-domain fragment of CaM (CaM1-80) binds weakly, regardless of calcium concentration. Equilibrium calcium titrations of CaM at several concentrations of the NaV1.2 IQ peptide showed that the peptide reduced the calcium affinity of the CaM C-domain sites (III and IV) without affecting the N-domain sites (I and II) significantly. This leads us to propose that the CaM C-domain mediates constitutive binding to the NaV1.2 peptide, but that interaction then distorts calcium-binding sites III and IV, thereby reducing their affinity for calcium. This contrasts with the CaM-binding domains of voltage-dependent Ca2+ channels, kinases, and phosphatases, which increase the calcium binding affinity of the C-domain of CaM.     

Isolation and characterization of a novel calmodulin-binding protein from potato.

Tuberization in potato is controlled by hormonal and environmental signals. Ca(2+), an important intracellular messenger, and calmodulin (CaM), one of the primary Ca(2+) sensors, have been implicated in controlling diverse cellular processes in plants including tuberization. The regulation of cellular processes by CaM involves its interaction with other proteins. To understand the role of Ca(2+)/CaM in tuberization, we have screened an expression library prepared from developing tubers with biotinylated CaM. This screening resulted in isolation of a cDNA encoding a novel CaM-binding protein (potato calmodulin-binding protein (PCBP)). Ca(2+)-dependent binding of the cDNA-encoded protein to CaM is confirmed by (35)S-labeled CaM. The full-length cDNA is 5 kb long and encodes a protein of 1309 amino acids. The deduced amino acid sequence showed significant similarity with a hypothetical protein from another plant, Arabidopsis. However, no homologs of PCBP are found in nonplant systems, suggesting that it is likely to be specific to plants. Using truncated versions of the protein and a synthetic peptide in CaM binding assays we mapped the CaM-binding region to a 20-amino acid stretch (residues 1216-1237). The bacterially expressed protein containing the CaM-binding domain interacted with three CaM isoforms (CaM2, CaM4, and CaM6). PCBP is encoded by a single gene and is expressed differentially in the tissues tested. The expression of CaM, PCBP, and another CaM-binding protein is similar in different tissues and organs. The predicted protein contained seven putative nuclear localization signals and several strong PEST motifs. Fusion of the N-terminal region of the protein containing six of the seven nuclear localization signals to the reporter gene beta-glucuronidase targeted the reporter gene to the nucleus, suggesting a nuclear role for PCBP.