Electrochemistry of Escherichia coli JM109: direct electron transfer and antibiotic resistance

In this study, the cyclic voltammetry (CV) and square wave voltammetry (SWV) techniques were used to investigate the extracellular electron transfer from Escherichia coli JM109. It was demonstrated that the formal redox potential of direct electron transfer between electrode and an E. coli JM109 cell in aerobic buffer corresponds to -0.42 V vs. Ag/AgCl. Based on the electroactivity of bacterial cells, the electrochemical system for definition of sensitivity of microbiological material to antibiotics cefepime, ampicillin, amikacin, and erythromycin was proposed. The results obtained indicate that with electrochemical methods it is possible to provide screening of potential drugs for bacterial diseases. The electrochemical method allows estimating the degree of E. coli JM109 cells resistance to antibiotics within 2-5h using disposable screen-printed graphite electrodes.     

Ag(I)-cysteamine complex based electrochemical stripping immunoassay: ultrasensitive human IgG detection

An ultrasensitive electrochemical immunosensor for a protein using a Ag (I)-cysteamine complex (Ag-Cys) as a label was fabricated. The low detection of a protein was based on the electrochemical stripping of Ag from the adsorbed Ag-Cys complex on the gold nanoparticles (AuNPs) conjugated human immunoglobulin G (anti-IgG) antibody (AuNPs-anti-IgG). The electrochemical immunosensor was fabricated by immobilizing anti-IgG antibody on a poly-5,2':5',2'-terthiophene-3'-carboxylic acid (polyTTCA) film grown on the glassy carbon electrode through the covalent bond formation between amine groups of anti-IgG and carboxylic acid groups of polyTTCA. The target protein, IgG was sandwiched between the anti-IgG antibody that covalently attached onto the polyTTCA layer and AuNPs-anti-IgG. Using square wave voltammetry, well defined Ag stripping voltammograms were obtained for the each target concentration. Various experimental parameters were optimized and interference effects from other proteins were checked out. The immunosensor exhibited a wide dynamic range with the detection limit of 0.4 ± 0.05 fg/mL. To evaluate the analytical reliability, the proposed immunosensor was applied to human IgG spiked serum samples and acceptable results were obtained indicating that the method can be readily extended to other bioaffinity assays of clinical or environmental significance.     

Fabrication of Au/Fe3O4/RGO based aptasensor for measurement of miRNA‐128, a biomarker for acute lymphoblastic leukemia (ALL)

Due to their high sensitivity, simplicity, portability, self‐contained, and low cost, the development of electrochemical biosensors is a beneficial way to diagnose and anticipate many types of cancers. An electrochemical nanocomposite‐based aptasensor is fabricated for the determination of miRNA‐128 concentration as the acute lymphoblastic leukemia (ALL) biomarker for the first time. The aptamer chains were immobilized on the surface of the glassy carbon electrode (GCE) through gold nanoparticles/magnetite/reduced graphene oxide (AuNPs/Fe₃O₄/RGO). Fast Fourier transform infrared (FTIR), X‐ray diffraction (XRD), vibrating sample magnetometer (VSM), and transmission electron microscopy (TEM) were used to characterize synthesized nanomaterials. Cyclic voltammetry (CV), square wave voltammetry (SWV), and electrochemical impedance spectroscopy (EIS) were used to characterize the modified GCE in both label‐free and labeled methods. The results indicate that the modified working electrode has high selectivity and for miRNA‐128 over other biomolecules. The hexacyanoferrate redox system typically operated at around 0.3 V (vs. Ag/AgCl), and the methylene blue redox system ran at about 0 V, were used as an electrochemical probe. The detection limit and linear detection range for hexacyanoferrate and methylene blue are 0.05346 fM, 0.1–0.9 fM, and 0.005483 fM, 0.01–0.09 fM, respectively. The stability and diffusion control analyses were performed as well. In both label‐free and labeled methods, the modified electron showed high selectivity for miRNA‐128. The use of methylene blue as a safer redox mediator caused miRNA‐128 to be detected with greater accuracy at low potentials in PBS media. The findings also show the substantial improvement in detection limit and linearity by using reduced graphene oxide‐magnetite‐gold nanoparticles that can be verified by comparing with previous studies on the detection of other miRNAs.     

Electrochemical properties of cytochroms P450 using nanostructured electrodes: direct electron transfer and electro catalysis

The present study demonstrates direct electron transfer between cytochromes P450 2B4 (CYP2B4), P450 1A2 (CYP1A2), sterol 14alpha-demethylase (CYP51b1) on the one hand and screen-printed graphite electrodes, modified with gold nanoparticles and didodecyldimethylammonium bromide (DDAB) on the other. Electro detection of heme proteins was possible when 2-200 pmol P450/electrode were adsorbed on the surface of nanostructured electrochemical interfaces. Electron transfer, direct electrochemical reduction and interaction with P450 substrates (oxygen, benzphetamine, and lanosterol) and with P450 inhibitor (ketoconazole) were analyzed using cyclic voltammetry (CV), square wave voltammetry (SWV) differential pulse voltammetry (DPV), and amperometry.     

A novel enzymatic hydrogen peroxide biosensor based on Ag/C nanocables

A novel enzymatic hydrogen peroxide sensor was successfully fabricated based on the nanocomposites containing of Ag/C nanocables and gold nanoparticles (AuNPs). Ag/C nanocables have been synthesized by a hydrothermal method and then AuNPs were assembled on the surface of Ag/C nanocables. The nanocomposites were confirmed by X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM) and energy-dispersive X-ray spectrometry (EDS). The above nanocomposites have satisfactory chemical stability and excellent biocompatibility. Cyclic voltammetry (CV) was used to evaluate the electrochemical performance of the Ag/C/Au nanocomposites at glassy carbon electrode (GCE). The results indicated that the Ag/C/Au nanocomposites exhibited excellent electrocatalytic activity to the reduction of H(2)O(2). It offered a linear range of 6.7×10(-9) to 8.0×10(-6) M, with a detection limit of 2.2×10(-9) M. The apparent Michaelis-Menten constant of the biosensor was 51.7×10(-6) M. These results indicated that Ag/C/Au nanocomposites have potential for constructing of a variety of electrochemical biosensors.     

Electrochemical imprinted sensor for determination of oleanic acid based on poly (sodium 4-styrenesulfonate-co-acrylic acid)-grafted multi-walled carbon nanotubes-chitosan and cobalt hexacyanoferrate nanoparticles

A novel sensitive and selective imprinted electrochemical sensor for the determination of oleanic acid was constructed on a carbon electrode by stepwise modification of functional multi-walled carbon nanotubes, cobalt hexacyanoferrate nanoparticles and a thin imprinted sol-gel film. The fabrication of a homogeneous porous poly (sodium 4-styrenesulfonate-co-acrylic acid)-grafted multi-walled carbon nanotubes/SiO(2)-chitosan nanocomposite film was conducted by controllable electrodeposition technology. The surface morphologies of the modified electrodes were characterized by scanning electron microscope. The performance of the imprinted sensor was investigated by cyclic voltammetry, square wave voltammetry and electrochemical impedance spectroscopy in detail. The imprinted sensor displayed high sensitivity and selectivity towards oleanic acid. A linear relationship between the sensor response signal and the logarithm of oleanic acid concentrations ranging from 1.0×10(-8) to 1.0×10(-3) mol L(-1) was obtained with a detection limit of 2.0×10(-9) mol L(-1). It was applied to the determination of oleanic acid in real capsule samples successfully.     

Biomimetic sensor for certain catecholamines employing copper(II) complex and silver nanoparticle modified glassy carbon paste electrode

A dimeric Cu(II) complex [Cu(μ(2)-hep)(hep-H)](2)·2ClO(4) (1) containing bidentate (hep-H=2-(2-hydroxyethyl)pyridine) ligand was synthesized and characterized by single crystal X-ray diffraction studies. Each Cu-ion in 1 is in a distorted square pyramidal geometry. Further 1 along with silver nanoparticles (SNPs) have been used as modifier in the construction of a biomimetic sensor (1-SNP-GCPE) for determining certain catecholamines viz., dopamine (DA), levodopa (l-Dopa), epinephrine (EP) and norepinephrine (NE) using cyclic voltammetry, chronocoulometry, electrochemical impedance spectroscopy and adsorptive stripping square wave voltammetry (AdSSWV). Finally, the catalytic properties of the sensor were characterized by chronoamperometry. Employing AdSSWV, the calibration curves showed linear response ranging between 10(-6) and 10(-9)M for all the four analytes with detection limits (S/N=3) of 8.52×10(-10)M, 2.41×10(-9)M, 3.96×10(-10)M and 3.54×10(-10)M for DA, l-Dopa, EP and NE respectively. The lifetime of the biomimetic sensor was 3 months at room temperature. The prepared modified electrode shows several advantages such as simple preparation method, high sensitivity, high stability, ease of preparation and regeneration of the electrode surface by simple polishing along with excellent reproducibility. The method has been applied for the selective and precise analysis of DA, l-Dopa, EP and NE in pharmaceutical formulations, urine and blood serum samples.     

Detection of the damage caused to DNA by niclosamide using an electrochemical DNA-biosensor

Niclosamide is the only commercially available molluscicide recommended by the WHO for large-scale use in schistosomiasis control programs. The electrochemical reduction and oxidation mechanism of niclosamide was studied using cyclic, differential and square wave voltammetry, at a glassy carbon electrode. An indirect procedure for in situ quantification of niclosamide using batch injection analysis with electrochemical detection, possible to be used for in situ determinations in river streams and effluents, was developed. It enabled a detection limit of 8 x 10(-7) M. The investigation of the niclosamide-DNA interaction using an electrochemical DNA-biosensor showed for the first time clear evidence of interaction with DNA and suggested that niclosamide toxicity can be caused by this interaction, after reductive activation.     

Cadmium ion-doped magnetic poly(styrene-acrylic acid) nanospheres for sensitive electrochemical immunoassay

A novel class of molecular tags, cadmium ion-doped magnetic poly(styrene-acrylic acid) nanospheres (Cd-MPSA), was first synthesized and functionalized with polyclonal rabbit anti-human luteinizing hormone antibodies (PAb(2)) for highly efficient electrochemical immunoassay of luteinizing hormone (LH). Transmission electron microscope (TEM) and Fourier transform infrared spectroscope (FTIR) were employed to characterize the prepared Cd-MPSA. By using Cd-MPSA-labeled PAb(2) as molecular tags, a novel sandwich-type immunoassay protocol was built for determination of LH on monoclonal mouse anti-human luteinizing hormone antibody (MAb(1))-functionalized gold electrode. The assay was carried out in pH 5.3 HAc-NaAc buffer solution by square wave voltammetry (SWV). The signal was obtained by the reduction of the doped cadmium ions in the Cd-MPSA. Under optimal conditions, the currents increased with the increasing LH level in the sample, and exhibited a linear range from 0.25 to 240 mIU mL(-1) with a detection limit of 0.08 mIU mL(-1) LH at 3s(B). The precision, reproducibility, and specificity were acceptable. No obvious difference was encountered in the analysis of spiking LH samples into newborn calf serum with the referenced values.     

Direct electrochemistry of hemoglobin in the hyaluronic acid films

Hemoglobin (Hb) in the hyaluronic acid (HA) was cast at pyrolytic graphite (PG) electrodes for researching its electrochemical and electrocatalytic properties. The formal potential and electron transfer rate constant of Hb on HA films were determined, and the stability of the films, the pH effect, and the influence of supporting electrolyte concentrations upon Hb electrochemistry on the films were investigated by cyclic voltammetry and square wave voltammetry. UV-Vis absorption and reflectance absorption infrared (RAIR) spectra showed that the protein on HA film retained near-native secondary structure. The stable Hb-HA/PG gave analytically useful electrochemical catalytic responses to hydrogen peroxide. Thus, the property of the HA film for sorption and retention of water maybe utilized to develop some new biosensors.     

Direct electrochemistry of hemoglobin in the hyaluronic acid films

Hemoglobin (Hb) in the hyaluronic acid (HA) was cast at pyrolytic graphite (PG) electrodes for researching its electrochemical and electrocatalytic properties. The formal potential and electron transfer rate constant of Hb on HA films were determined, and the stability of the films, the pH effect, and the influence of supporting electrolyte concentrations upon Hb electrochemistry on the films were investigated by cyclic voltammetry and square wave voltammetry. UV–Vis absorption and reflectance absorption infrared (RAIR) spectra showed that the protein on HA film retained near-native secondary structure. The stable Hb–HA/PG gave analytically useful electrochemical catalytic responses to hydrogen peroxide. Thus, the property of the HA film for sorption and retention of water maybe utilized to develop some new biosensors.     

Preparation of novel mercury-doped silver nanoparticles film glassy carbon electrode and its application for electrochemical biosensor

A novel mercury-doped silver nanoparticles film glassy carbon (Ag/MFGC) electrode was prepared in this study. Electrochemical behaviors of cysteine on the Ag/MFGC electrode were investigated by electrochemical impedance spectroscopy and cyclic voltammetry (CV). The results indicated that cysteine could be strongly adsorbed on the surface of the Ag/MFGC electrode to form a thin layer. The doped electrode could catalyze the electrode reaction process of cysteine, and the cysteine displayed a pair of well-defined and nearly reversible CV peaks at the electrode in an acetate buffer solution (pH 5.0). The Ag/MFGC electrode was used for determination of cysteine by differential pulse voltammetry. The linear range was between 4.0x10(-7) and 1.3x10(-5) mol/L, with a detection limit of 1.0x10(-7) mol/L and a signal-to-noise ratio of 3. The relative standard deviation was 2.4% for seven successive determinations of 1.0x10(-5) mol/L cysteine. The determinations of cysteine in synthetic samples and urinal samples were carried out and satisfactory results were obtained. Amperometric application of the Ag/MFGC electrode as biosensors is proposed.     

Heme protein films with polyamidoamine dendrimer: direct electrochemistry and electrocatalysis

Biocompatible nanosized polyamidoamine (PAMAM) dendrimer films provided a suitable microenvironment for heme proteins to transfer electron directly with underlying pyrolytic graphite (PG) electrodes. Hemoglobin (Hb), myoglobin (Mb), horseradish peroxidase (HRP), and catalase (Cat) incorporated in PAMAM films exhibited a pair of well-defined, quasi-reversible cyclic voltammetric peaks, respectively, characteristic of the protein heme Fe(III)/Fe(II) redox couples. While Hb-, Mb-, and HRP-PAMAM films showed the cyclic voltammetry (CV) peaks at about -0.34 V vs. saturated calomel electrode (SCE) in pH 7.0 buffers, Cat-PAMAM films displayed the peak pair at a more negative potential of -0.47 V. The protein-PAMAM films demonstrated a surface-confined or thin-layer voltammetric behavior. The electrochemical parameters such as apparent heterogeneous electron transfer rate constants (k(s)) and formal potentials (E (degrees ')) were estimated by square wave voltammetry with nonlinear regression analysis. UV-vis and IR spectroscopy showed that the proteins retained their near-native secondary structures in PAMAM films. Oxygen, hydrogen peroxide, and nitrite were catalytically reduced at the protein-PAMAM film electrodes, showing the potential applicability of the films as the new type of biosensors or bioreactors based on direct electrochemistry of the proteins.     

Assembly of electroactive layer-by-layer films of hemoglobin and polycationic poly(diallyldimethylammonium)

Layer-by-layer (PDDA/Hb)(n) films were assembled by alternate adsorption of positively charged poly(diallyldimethylammonium) (PDDA) and negatively charged hemoglobin (Hb) at pH 9.2 from their aqueous solutions on pyrolytic graphite electrodes and other substrates. The assembly process was monitored and confirmed by quartz crystal microbalance (QCM), UV-vis spectroscopy, and cyclic voltammetry (CV). CVs of (PDDA/Hb)(n) films showed a pair of well-defined, nearly reversible peaks at about -0.34 V vs SCE at pH 7.0, characteristic of Hb heme Fe(III)/Fe(II) redox couple. Positions of Soret absorption band and infrared amide II band of Hb in (PDDA/Hb)(8) films suggest that Hb in the films keeps its secondary structure similar to its native state. The electrochemical parameters of (PDDA/Hb)(8) films were estimated by square wave voltammetry, and the thickness of the PDDA/Hb bilayer was estimated by QCM and scanning electron microscopy. Trichloroacetic acid and nitrite (NO(2)(-)) were catalytically reduced at (PDDA/Hb)(8) film electrodes. The electrochemical catalytic reactions of O(2) and H(2)O(2) on (PDDA/Hb)(8) films were also studied.     

Influence of pigment substitution on the electrochemical properties of Rhodobacter sphaeroides 601 reaction centers

With the help of pigment substitution, self-assembled monolayer film and square wave voltammetry, the influence of pigment substitution on the electrochemical properties of Rhodobac-ter sphaeroides 601 reaction centers was investigated. Results showed that the charge separation could also be driven by externally electric field, similar to the primary photochemical reaction in purple bacterial reaction center. On the surface of Au electrode, a self-assembled monolayer film (the RC-PDDA-DMSA film) was made up of 2,3-dimercaptosuccinic acid (DMSA), poly-dimeth-yldiallylammonium chloride (PDDA) and reaction center (RC). When square wave voltammetry was used to study the RC-PDDA-DMSA film, four redox pairs in the photochemical reaction of RC were observed by changing frequency. With nonlinear fitting, the standard potential of P/P+ and the corresponding electrode reaction rate constant were determined to be 0.522 V and 13.04 S-1, respectively. It was found that the redox peak at -0.02 V changed greatly when b     

Electrochemical behaviors of diethylstilbestrol and its application in pharmacokinetics

The electrochemical behaviors of diethylstilbestrol (DES) at a glassy carbon electrode were investigated by cyclic voltammetry, linear sweep voltammetry, and differential pulse voltammetry (DPV). Based on these, a sensitive and selective DPV method was developed for determination of DES. The linear response range of DES is 1.0 x 10(-4)-2.0 x 10(-6) mol/L and the detection limit was 8.0 x 10(-8) mol/L. The developed method has been used for the pharmacokinetics of DES in rabbit blood plasma.     

Synthesis and bioelectrochemical behavior of aromatic amines

Four aromatic amines 1-amino-4-phenoxybenzene (A₁), 4-(4-aminophenyloxy) biphenyl (A₂), 1-(4-aminophenoxy) naphthalene (A₃) and 2-(4-aminophenoxy) naphthalene (A₄) were synthesized and characterized by elemental, spectroscopic (FTIR, NMR), mass spectrometric and single crystal X-ray diffraction methods. The compounds crystallized in monoclinic crystal system with space group P2₁. Intermolecular hydrogen bonds were observed between the amine group and amine/ether acceptors of neighboring molecules. Electrochemical investigations were done using cyclic voltammetry (CV), square wave voltammetry (SWV) and differential pulse voltammetry (DPV). CV studies showed that oxidation of aromatic amines takes place at about 0.9 V (vs. Ag/AgCl) and the electron transfer (ET) process has irreversible nature. After first scan reactive intermediate were generated electrochemically and some other cathodic and anodic peaks also appeared in the succeeding scans. DPV study revealed that ET process is accompanied by one electron. DNA binding study of aromatic amines was performed by CV and UV–visible spectroscopy. These investigations revealed groove binding mode of interaction of aromatic amines with DNA.     

Determination of isoflavones in soybean food and human urine using liquid chromatography with electrochemical detection

A highly sensitive high-performance liquid chromatographic method with electrochemical detection (HPLC-ED) was developed for the determination of isoflavones. Electrochemical behaviour of daidzein and genistein was studied on carbon paste electrode (CPE) by adsorptive transfer stripping square wave voltammetry. The obtained electrochemical results were used for the development of HPLC-ED method. Furthermore, isoflavones were separated on an Atlantis dC18 column using a mobile phase consisting of acetonitrile (solvent A) and 0.15M acetate buffer of pH 5.5 (solvent B) at a flow rate 0.4 mL/min. A linear gradient profile (solvent B) was at 0-2 min 87%; 22 min 60%; 27 min 50%; 31 min 45%; 47 min 87%. Full scan of multi-channel coulometric detection was tested and optimal potential at 450 mV was chosen for our purposes. Calibration curves were linear (daidzein R(2) = 0.9993 and genistein R(2) = 0.9987). The detection limit for daidzein/genistein was 480/394 pg/mL (1.8/1.5 nM) and per column 2.4/1.9 pg. Isoflavones extracted from soybean products (farina, meat, milk) by the accelerated solvent extraction (ASE) procedure and isoflavones present in human urine were determined by the HPLC-ED method.     

Sensitive monitoring of riboflavin in commercial multivitamins using poly (chitosan)‐based nanocomposite

The rapid and sensitive determination of riboflavin (RF) is important for the treatment of seborrheic and glossitis dermatitis, sunlight sensitivity, mucosal, and skin disorders. In this work, an electrochemical sensor was developed by electrodes modification using poly (chitosan) to sensitive detection of RF in commercial multivitamin. Electrodeposition of chitosan on the surface of glass carbon electrode was performed using cyclic voltammetry technique in the range of ?1 to +1 V. The modified electrode surface morphology was characterized using a high‐resolution field emission scanning electron microscope. The modified electrode was used as an effective electrical interface for the detection of RF using cyclic, differential pulse, and square wave voltammetry techniques. Finally, the sensor was applied to determine RF in commercial multivitamins. In optimum conditions, the linear range for the standard sample of RF and commercial multivitamins 94 to 333μM and 24.6 to 176μM were obtained, respectively. Low limit of quantification (LLOQ) were obtained as 24.6μM.     

Novel potentiometry immunoassay with amplified sensitivity for diphtheria antigen based on Nafion, colloidal Ag and polyvinyl butyral as matrixes

A novel potentiometry immunoassay with amplified sensitivity has been developed for the detection of diphtheria antigen (Diph) via immobilizing diphtheria antibody (anti-Diph) on a platinum electrode based on Nafion, colloidal Ag (Ag), and polyvinyl butyral (PVB) as matrixes in this study. The modified procedure was further characterized by electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The influence and factors influencing the performance of resulting immunosensor were studied in detail. The resulting immunosensor exhibited sigmoid curve with log Diph concentrations, high sensitivity (51.4 mV/decade), wide linear range from 8 to 800 ng ml(-1) with a detection limit of 1.5 ng ml(-1), rapid potentiometric response (<3 min) and long-term stability (>6 months). Analytical results of clinical samples show that the developed immunoassay is comparable with the enzyme-linked immunosorbent assays (ELISAs) method, implying a promising alternative approach for detecting diphtheria antigen in the clinical diagnosis.