Structural studies on the chiral selector capacity of cyclodextrin derivatives

Chromatographic separation of enantiomers to assure or enhance chiral purity is of considerable importance and can be achieved by the use of selectors of great structural variety. Cyclodextrins are an important and frequently used class, and they are multimodal selectors since multiple chiral interactions are possible by very different mechanisms. Here, the results of a preliminary examination on the possible value of computational molecular modeling approaches for the predictability of cyclodextrin selector effects for compounds that possess both geometrical and optical isomerism are presented. Interactions between various cyclodextrins and pyrethroic acids are modeled, interpreted, and compared to experimental capillary electrophoresis data.     

Evaluation of quantitative structure property relationships necessary for enantioresolution with lambda- and sulfobutylether lambda-carrageenan in capillary electrophoresis

Lambda-carrageenan, a linear, high molecular weight sulfated polysaccharide, was successfully employed in both its native and sulfobutyl derivatized form as a chiral selector in capillary electrophoresis for the separation of enantiomers of basic pharmaceutical compounds. In order to characterize the chiral selectivity properties of this chiral selector, various structurally related racemic compounds were analyzed for enantiomeric interactions using capillary electrophoresis. The results of these studies were then rationalized and analyzed utilizing a general quantitative structure-property relationship (QSPR) evaluation in order to predict critical analyte structural requirements for successful enantiomeric separation. Important structural components of the analytes were found to include the aromatic content, the type of substitution on the aromatic ring, presence of a primary or secondary protonated amine, and an overall positive charge to the molecule.     

Recent progress in capillary electrophoretic analysis of amino acid enantiomers

This review highlights recent progresses in capillary electrophoresis (CE) analysis of amino acid enantiomers in the last decade. Various chiral selectors including cyclodextrins (CDs), bile salts, crown ethers, cinchona alkaloids, metal-chiral amino acid complexes, macrocyclic antibiotics and proteins have been employed to separate amino acid enantiomers. In the CE analysis of amino acids, the selection of the separation mode is one of the most important issues to obtain good resolution of target enantiomers. Among several separation modes, CD-modified capillary zone electrophoresis (CD-CZE), CD electrokinetic chromatography (CDEKC), micellar EKC (MEKC), CD-modified micellar electrokinetic chromatography (CD-MEKC), capillary electrochromatography (CEC), ligand-exchange CE (LE-CE), and nonaqueous CE (NACE) have been employed to the chiral analysis of amino acids. More than 160 published research articles collected from SciFinder Scholar databases from the year 2001 described the enantioseparations of amino acids by capillary-based electrophoresis. This review provides a comprehensive table listing the CE analysis of amino acid enantiomers with categorizing by the separation modes.     

Enantiomeric separation of bupropion enantiomers by electrokinetic chromatography: quantitative analysis in pharmaceutical formulations

The first CE method enabling the quantitation of the two enantiomers of bupropion was developed in this work. Electrokinetic chromatography (EKC) mode using cyclodextrins as chiral selectors was employed. A study on the enantiomeric separation ability of different neutral and anionic CDs was carried out. Sulfated-beta-CD was shown to provide the highest values for the enantiomeric resolution. The influence of some experimental conditions, such as pH, chiral selector concentration, temperature, and separation voltage on the enantiomeric separation of bupropion was also studied. The use of 10 mM sulfated-beta-CD in 50 mM borate buffer (pH 9.0) with an applied voltage of 30 kV and a temperature of 30 degrees C enabled the separation of the enantiomers of bupropion with high resolution (Rs > 7) and short analysis time (approximately 3.5 min). Finally, the method was successfully applied to the quantitation of bupropion in two pharmaceutical formulations.     

Role of chemical structure in stereoselective recognition of beta-blockers by cyclodextrins in capillary zone electrophoresis

Most of the β-blocking drugs for treating diseases of the cardiovascular system are chiral aryloxy–propanolamine derivatives. Tipically, the S(−) enantiomers are more active than the R(+) enantiomers. Only some of them (for example timolol) are used as single enantiomers, the others are employed as racemates. For the determination of the enantiomeric purity of timolol European Pharmacopoeia prescribes an HPLC method using chiral stationary phase. However, the use of chiral capillary zone electrophoresis for the determination of the enantiomeric purity is of pharmaceutical interest. This study describes the application of various cyclodextrin derivatives, hydroxypropyl-β-cyclodextrin, randomly methylated β-cyclodextrin, sulphated β-cyclodextrin and sulphated -cyclodextrin for the stereoselective analyses of β-blockers. Baseline separation was obtained for bopindolol, carvedilol, mepindolol, pindolol and alprenolol, while only partial separation was observed for sotalol, propranolol, oxprenolol, atenolol, bisoprolol, bupranolol, and metoprolol. The uneven molecular recognition of the enantiomers of the β-blockers, especially of the optical isomers of labetalol and nadolol, showed the importance of the chemical nature of the separators and the analytes.     

Cyclodextrins and enantiomeric separations of drugs by liquid chromatography and capillary electrophoresis: basic principles and new developments

Investigation of individual drug enantiomers is required in pharmacokinetic and pharmacodynamic studies of drugs with a chiral centre. Cyclodextrins (CDs) are extensively used in high-performance liquid chromatography as stationary phases bonded to a solid support or as mobile phase additives in HPLC and capillary electrophoresis (CE) for the separation of chiral compounds. We describe here the basis for the liquid chromatographic and capillary electrophoretic resolution of drug enantiomers and the factors affecting their enantiomeric separation. This review covers the use of CDs and some of their derivatives in studies of compounds of pharmacological interest.     

Comparison of chiral recognition capabilities of cyclodextrins for the separation of basic drugs in capillary zone electrophoresis

The enantiomeric separation of some racemic anti-histamines and anti-malarials, namely (±)-pheniramine, (±)-brompheniramine, (±)-chlorpheniramine, (±)-doxylamine, and (±)-chloroquine, was investigated by capillary zone electrophoresis. The enantiomeric separation of five compounds was obtained by addition of 7 mM (1%, w/v) sulfated-β-cyclodextrin into the buffer as a chiral selector. The effects of sulfated-β-cyclodextrin concentration and buffer pH on migration and resolution are discussed. Two other cyclodextrins, carboxyethylated-β-cyclodextrin and hydroxypropyl-β-cyclodextrin were also investigated. Four of the racemic compounds were resolved using 14 mM (2%, w/v) carboxyethylated-β-cyclodextrin while 28 mM (4%, w/v) hydroxypropyl-β-cyclodextrin resolved only two of them. It was found that the type of substituent and the degree of substitution on the rim of the CD structure played an important role in enhancing the chiral recognition. Cyclodextrins with negatively charged substituents and higher degree of substitution on the rim of the structure proved to give better resolution to the cationic racemic compounds compared with cyclodextrin with neutral substituents. This is due to the countercurrent mobility of the negatively charged cyclodextrin relative to the cationic analytes thus allowing for a smaller difference in interaction constants to achieve a successful resolution of enantiomers. Furthermore, lower concentrations of negatively charged cyclodextrins were necessary to achieve the equivalent resolutions as compared with the neutral ones.     

Role of capillary electrophoresis methods in the drug development process

In the past several years, capillary electrophoresis (CE) has generated considerable interest from pharmaceutical companies for control of both the chiral and achiral purity of bulk drugs and drug products. This paper evaluates the use of CE as: (1) a technique complementary to HPLC for the determination of peak homogeneity of a drug, (2) for determination of chiral purity, and (3) for determination of achiral purity. It would be greatly advantageous if CE could be used to determine both the chiral and achiral purity in a single assay. This investigation compares the results obtained for the separation of the enantiomers of duloxetine using several neutral cyclodextrins to those obtained using anionic cyclodextrins (sulfobutyl ether derivatives) as chiral selectors added to the separation buffer. In addition, it reports chiral separations obtained by using neutral cyclodextrins in a sulfonic acid-coated capillary column, which give a negatively charged capillary surface and electro-osmotic flow even in low pH buffers. The possible mechanism of separation is discussed. © 1996 Wiley-Liss, Inc.     

Enantiomeric separation of organophosphorus pesticides by high-performance liquid chromatography,gas chromatography and capillary electrophoresis and their applications to environmental fate and toxicity assays

In recent years, the continuous evolution of the field of stereochemistry has produced a heightened awareness of the applications of pure enantiomers of agrochemicals. This review describes reports of the enantiomeric separation of commercial organophosphorus pesticides (OPs) and the applications of these methods to research on the enantioselectivity of the toxicity and environmental fate of these compounds. Chiral OPs can be analysed by high-performance liquid chromatography (HPLC), gas chromatography (GC), and capillary electrophoresis (CE). These different separation techniques for OP enantiomers are briefly discussed, and their applications are presented.     

Use of cyclodextrins in capillary zone electrophoresis for the separation of optical isomers: Resolution of racemic tryptophan derivatives

In this study capillary zone electrophoresis has been used for the separation of racemic tryptophan derivatives in their enantiomers. The effect of cyclodextrins with different shape, added to the background electrolyte, on the migration time of 10 compounds, including methyl tryptophan, hydroxy tryptophan, and tryptophan ester derivatives, has been studied. Furthermore, the effect of cyclodextrins with different shape and that of the composition of the background electrolyte on the enantiomer resolution are discussed. Among different cyclodextrins used α-cyclodextrin and heptakis(2,6-di-O-methyl)-β-cyclodextrin were found to possess the best complexing capacity and thus the resolution power toward analysed compounds.     

Separation and determination of warfarin enantiomers in human plasma samples by capillary zone electrophoresis using a methylated β-cyclodextrin-containing electrolyte

A methyl β-cyclodextrin with a degree of substitution of 1.8 proved to be an effective chiral selector, among other cyclodextrins tested, for the separation of warfarin enantiomers by capillary electrophoresis. The operating conditions were optimized with respect to electrolyte composition (buffer pH, ionic strength, cyclodextrin concentration, methanol content) and applied voltage. The influence of a high ionic strength on the resolution was clearly shown. A baseline separation can be obtained in less than 15 min with an efficiency of ca. 250 000 theoretical plates. These conditions were applied to the determination of warfarin enantiomers in the plasma of patients under warfarin therapy. The limit of detection for the whole procedure (dichloromethane extraction followed by evaporation to dryness and capillary electrophoresis) was of the order of 0.2 mg/l (6.5 · 10⁻⁷M) of each enantiomer.     

Capillary electrophoresis enantioselective separation of vigabatrin enantiomers by precolumn derivatization with dehydroabietylisothiocyante and UV-vis detection

A simple and reliable capillary electrophoresis (CE) method with UV-vis detection is presented for the enantioselective separation and determination of vigabatrin enantiomers. Dehydroabietylisothiocyante (DHAIC), a novel chiral derivatizing reagent, was used for precolumn derivatization of vigabatrin enantiomers. Optimal separation was obtained with a running buffer consisting of 50 mM Na2HPO4 (pH 9.0), 17 mM sodium dodecyl sulfate (SDS) and 25% acetonitrile. The enantiomeric separation of vigabatrin derivatives was achieved within 25 min, and the resolution was found to be 2.1. Detection was followed by direct UV absorptiometric measurements at 202 nm. A calibration curve ranging from 0.3 to 6.0 microg/ml was shown to be linear, and the limit of detection was 0.15 microg/ml. The developed method has been applied to the determination of vigabatrin enantiomers spiked in human plasma, no interferences were found from endogenous amino acids.     

Separation of the enantiomers of coumarinic anticoagulant drugs by capillary electrophoresis using maltodextrins as chiral modifiers

The separation and quantitation of coumarinic anticoagulant drug enantiomers were achieved by direct chiral capillary electrophoresis using complex maltooligosaccharide mixtures as stereoselective electrolyte modifiers. Chiral separations were characterized by a high selectivity and efficiency, enabling enantiomeric excess determinations. In addition, preliminary results indicate the applicability of the method for the determination of individual enantiomers in biological samples. So the method can be used to perform stereoselective pharmacokinetic studies. © 1994 Wiley-Liss, Inc.     

Use of Sulfated Cyclofructan 6 and Sulfated Cyclodextrins for the Chiral Separation of Four Basic Pharmaceuticals by Capillary Electrophoresis

Sulfated cyclofructan 6 (S‐CF6) and sulfated cyclodextrins (S‐α‐, β‐, γ‐CDs) are highly selective chiral selectors for the enantioseparation of basic solutes. In this study, S‐CF6 was introduced for the enantiomeric separation of four basic pharmaceuticals (including tamsulosin, tiropramide, bupivacaine, and norephedrine) by capillary electrophoresis (CE), and the enantiomeric separation performance was compared with S‐α‐, β‐, γ‐CDs. The effects of the chiral selector type, chiral selector concentration, operating voltage, and column temperature were examined and optimized. Excellent resolutions were obtained for all solutes on these chiral selectors. Chirality 25:735–742, 2013. © 2013 Wiley Periodicals, Inc.     

Analysis of optical purity and impurity of synthetic D-phenylalanine products using sulfated beta-cyclodextrin as chiral selector by reversed-polarity capillary electrophoresis

A new capillary electrophoresis (CE) method has been achieved for simultaneous separation and quantification of phenylalanine, N-acetylphenylalanine enantiomers, and prochiral N-acetylaminocinnamic acid, possibly co-existent in reaction systems or synthesized products of D-phenylalanine. The separation was carried out in an uncoated capillary under reversed-electrophoretic mode. Among the diverse charged cyclodextrins (CDs) examined, highly sulfated (HS)-beta-CD as the chiral selector exhibited the best enantioselectivity. The complete separation of the analytes was obtained under the optimum conditions of pH 2.5, 35 mM Tris buffer containing 4% HS-beta-CD, applied voltage -15 kV, and capillary temperature 25 degrees C. Furthermore, the proposed method was applied to the determination of optical purity and trace impurities in three batches of the asymmetric synthetic samples of D-phenylalanine, and satisfactory results were obtained. The determination recoveries of the samples were in the range of 97.8-103.8%, and precisions fell within 2.3-5.0% (RSD). The results demonstrate that this CE method is a useful, simple technique and is applicable to purity assays of D-phenylalanine.     

Enantiomeric separation of ornithine in complex mixtures of amino acids by EKC with off-line derivatization with 6-aminoquinolyl-N-hydroxysuccinimidyl carbamate

A new analytical methodology was developed by EKC enabling the fast enantiomeric separation of Ornithine in complex mixtures of amino acids. A previous derivatization step with 6-aminoquinolyl-N-hydroxysuccinimidyl carbamate (AQC) was achieved to enable the sensitive UV detection of amino acids as well as to make possible their interaction with the CDs employed as chiral selectors. A dual CD system containing an anionic and a neutral CD in phosphate buffer at acid pH showed a high resolving power allowing the enantiomeric separation of 18 protein amino acids and Orn. The method was applied to the analysis of fermented foods to investigate the extent of the presence of Orn enantiomers.     

Evaluation of chiral discrimination of highly negatively charged enantiomers by quaternary ammonium beta-cyclodextrin using 1H NMR

The positively charged quaternary ammonium cyclodextrin, QA-beta-CD, was previously used as a chiral selector to achieve baseline resolution of two of the dianionic enantiomers of disodium 3-(p-isothiocyanatophenoxy)-3-(p-isothiocyanatophenyl)propane-1,2-disulfate by capillary electrophoresis. The basis of the chiral discrimination between QA-beta-CD and the enantiomers was investigated by (1)H NMR spectroscopy. COSY and NOESY spectra were used to infer the role that molecular interactions and the stereocenters have upon association of QA-beta-CD with the enantiomers. A parallel two-step complexation model is used to rationalize the NMR and the chiral discrimination observed during separation of the enantiomers.     

Preparation and evaluation of bovine serum albumin immobilized chiral monolithic column for affinity capillary electrochromatography

A system of capillary silica monolith with bovine serum albumin (BSA) functionalized through two approaches for affinity monolithic capillary electrochromatography (AMCEC) was developed. Covalent immobilization conditions for two different Schiff base methods, which employed 3-glycidopropyl trimethoxysilane (GPTS) and 3-aminopropyl trimethoxysilane (APTS) as starting materials, respectively, were investigated to obtain good and stable chiral separation. The BSA immobilized silica monoliths were evaluated in terms of morphology, electroosmotic flow, retention time, column efficiency and resolution of model compound (±)-tryptophan. The columns exhibited satisfactory run-to-run, column-to-column repeatability and maintained their enantioselectivity for more than 3 months. Both developed methods can baseline separate tryptophan enantiomers, whereas shorter retention time, better column efficiency, and enantiomeric recognition between two pairs of drug enantiomers (pantoprazole and atenolol) were obtained by the GPTS method.     

Study of stereoselective pharmacokinetics of anisodamine enantiomers in rabbits by capillary electrophoresis

The purpose of this study was to determine the pharmacokinetics of anisodamine enantiomers in plasma after oral and intravenous administration of racemic anisodamine in rabbits. A capillary electrophoresis method for the simultaneous separation of two pairs of enantiomers in plasma has been firstly developed and validated. Using a 75 mM phosphate buffer containing 25 mM carboxymethylated-gamma-cyclodextrin at pH 2.5, good resolution was achieved on a 45-cm uncoated fused-silica capillary at the voltage of 20 kV and 25 degrees C. The pharmacokinetics of individual anisodamine enantiomers were characterized using the CE assay, the sole method of enantiomeric separation for anisodamine. Pharmacokinetic analysis of results indicated that anisodamine enantiomers showed non-stereoselective disposition or stereoselective disposition in different rabbits. For the rabbits with non-stereoselective disposition, similar pharmacokinetic characteristics were observed between (6S, 2'S)- and (6R, 2'R)-, or (6S, 2'R)- and (6R, 2'S)-anisodamine. For the rabbits with stereoselective disposition, (6S, 2'S)- and (6R, 2'S)-anisodamine were below the established LOD, while the two remaining enantiomers also had similar pharmacokinetic profiles. Further investigations remain necessary to find out the underlying mechanism about the stereoselective disposition of (6S, 2'S)- and (6R, 2'S)-anisodamine.     

Enantioseparation of citalopram enantiomers by capillary electrophoresis: Method development through experimental design and computational modeling

Citalopram (CIT) is a frequently used modern antidepressant that inhibits selectively serotonin reuptake in the brain. It has a chiral center in its structure and is used in therapy as both racemic mixture and pure enantiomer as its pharmacological effect is almost entirely associated with S-CIT. The aim of this study was the development of a simple and rapid capillary electrophoresis (CE) method for the separation and quantification of CIT enantiomers. To establish the optimum chiral selector, several native and derivatized, neutral, and ionized cyclodextrins (CDs) were examined at different pH levels. An experimental design strategy was adopted for method optimization; a fractional factorial design was applied for screening purposes to identify significant experimental factors followed by a face-centered central composite design used for optimization purposes. Computational modeling was used to obtain information on the interaction energy and the geometry of the complexes to aid in the understanding of chiral separation mechanism. The best results were obtained when using a 25-mM phosphate buffer at pH 7.0, 3-mM CM-β-CD as chiral selector, 17.5°C temperature, 15-kV voltage, and 50 mbar/s hydrodynamic injection. The separation time was fast, below 3 min, and the migration order was S-CIT followed by R-CIT. The analytical performance of the method was verified in terms of precision, linearity, accuracy, sensibility, and robustness, and the method was applied for the determination of CIT enantiomers from pharmaceutical preparations.