Kinetic properties of turkey pancreatic lipase: a comparative study with emulsified tributyrin and monomolecular dicaprin

Using the classical emulsified system and the monomolecular film technique, we compared several interfacial properties of turkey pancreatic lipase (TPL) and human pancreatic lipase (HPL). TPL, like HPL, presented the interfacial activation phenomenon when vinyl ester was used as substrate. In the absence of colipase and bile salts, using tributyrin emulsion or monomolecular films of dicaprin at low surface pressure, TPL, unlike HPL, hydrolyzes pure tributyrin emulsion as well as dicaprin films maintained at low surface pressures. TPL was also able to hydrolyze triolein emulsion in the absence of any additive and despite the accumulation of long-chain free fatty acids at the interface. The difference of behaviors between TPL and HPL can be explained by the penetration power of each enzyme. The enzyme that presents the maximal pi(c) (TPL) interacts more efficiently with interfaces, and it is not denaturated at high interfacial energy. Turkey pancreatic lipase is more active on rac-dicaprin than HPL; a maximal ratio of 9 was found between the catalytic activities of the two lipases measured at their surface pressure optima (20 mN m(-1)). A kinetic study on the surface pressure dependency, stereospecificity, and regioselectivity of TPL was performed using enantiopure diglyceride (1,2-sn-dicaprin and 2,3-sn-dicaprin) and a prochiral isomer (1,3-dicaprin) that were spread as monomolecular films at the air-water interface. At low surface pressure (15 mN m(-1)), TPL acts preferentially on primary carboxylic ester groups of the diglyceride isomers (1,3-dicaprin), but at high surface pressure (23 mN m(-1)), this enzyme prefers both adjacent ester groups of the diglyceride isomers (1,2-sn-dicaprin and 2,3-sn-dicaprin). HPL prefers adjacent ester groups of the diglyceride isomers (1,2-sn-dicaprin and 2,3-sn-dicaprin). Furthermore, TPL was found to be markedly stereospecific for the sn-1 position of the 1,2-sn-enantiomer of dicaprin at low surface pressure (15 mN m(-1)), while at high surface pressure (23 mN m(-1)), this lipase presents a stereopreference for the sn-3 position of the 2,3-sn-enantiomer of dicaprin. HPL is stereospecific for the sn-1 position of the 1,2-sn-enantiomer of dicaprin both at 15 and 23 mN m(-1).     

Kinetic Properties of a Novel Fusarium solani (phospho)lipase: A Monolayer Study

Using the monomolecular film technique, we studied interfacial properties of Fusarium solani lipase (FSL). This lipolytic enzyme was found to be unique among the fungal lipases possessing not only a lipase activity but also a high phospholipase one.The FSL was able to hydrolyze dicaprin films at various surface pressures. The surface pressure dependency, the stereospecificity, and the regioselectivity of FSL were performed using optically pure stereoisomers of diglyceride (1,2‐sn‐ dicaprin and 2,3‐sn‐dicaprin) and a prochiral isomer (1,3‐sn‐dicaprin) spread as monomolecular films at the air–water interface. The FSL prefers adjacent ester groups of the diglyceride isomers (1,2‐sn‐dicaprin and 2,3‐sn‐dicaprin) at low and high surface pressures. Furthermore, FSL was found to be markedly stereospecific for the sn‐1 position of the 1,2‐sn‐enantiomer of dicaprin at both low and high surface pressures.Moreover, FSL shows high activities on phospholipids monolayers. However, this enzyme displays high preference to zwitterionic phospholipids compared to the negatively charged ones. Chirality, 25:35‐38, 2012. © 2012 Wiley Periodicals, Inc.     

Enantiomeric perylene-glycerolipids as fluorogenic substrates for a dual wavelength assay of lipase activity and stereoselectivity

A new type of fluorogenic alkyldiacyl glycerols was synthesized and used as fluorogenic substrates for the analysis of lipase activities and stereoselectivities. These compounds contain perylene as a fluorophore and the trinitrophenylamino (TNP) residue as a quencher. Both substituents are covalently bound to the ω-ends of the sn-2 and sn-1(3) acyl chains, respectively. Upon glycerolipid hydrolysis, the residues are separated from each other thus allowing determination of lipase activity by the continuous increase in fluorescence intensity which is caused by dequenching. Using enantiomeric pairs of these compounds, we were able to analyze lipase stereoselectivity depending on the reaction medium. Mixtures of enantiomeric fluorogenic alkyldiacyl glycerols, selectively labelled with pyrene or perylene as fluorophores, can be used for a dual-wavelength “stereoassay” of lipases. Since absorption and emission maxima of both labels are clearly separated, hydrolysis of the respective enantiomeric substrates can be determined simultaneously, and the difference in the rates of hydrolysis can be taken as a parameter for the stereopreference of a lipase. Hydrolysis rates measured with perylene-substituted lipids are generally lower than those obtained with the pyrene analogs. Thus, with a mixture of perylene and pyrene-substituted lipids, we observe a higher apparent stereoselectivity of lipases since we measure a combination of stereo- and substrate selectivity. In the presence of albumin, all microbial lipases tested so far exhibit stereopreference for the sn-1 glycerol position. In our assay, the apparent stereoselectivities are highest if in the presence of albumin, the sn-1 position carries pyrene and the sn-3 position is substituted with perylene. The lipase stereoselectivity assay described here requires the simultaneous measurement of the fluorescence intensities at two different wavelengths in a single cuvette and can thus be carried out using existing and cheap instrumentation that was developed for the fluorimetric analysis of Ca⁺⁺ concentrations. © 1996 Wiley-Liss, Inc.     

Proteolytic Activity in Commercial Triacylglycerol Hydrolase Preparations

The proteolytic activity of 34 commercial lipase preparations (CLP) was determined using a labeled casein substrate. Only three CLP were free from proteolytic activity. Porcine pancreatic lipases exhibited levels of proteolytic activity comparable to or greater than that of a reference porcine trypsin. Bacterial lipases contained up to 10% of the proteolytic activity of commercial trypsin. Proteolytic activities in lipases from fungal species were present at low levels (<1% of the activity in trypsin). Among preparations of fungal origin, lipases from Aspergillus niger and Mucor javanicus were highest in proteolytic activity; Aspergillus oryzae and Pseudomonas cepacia lipases were lowest. Proteins in CLP were separated by non-denaturing PAGE; between 4 and 17 protein bands in the range &#104 6.5- &#83 200 kDa were observed. With the exception of a single pair of Rhizomucor miehei lipases, the distribution of apparent molecular weights (AMW) was unique to each preparation. Bands of caseinolytic activity in commercial lipases were visualized by applying a zymographic technique. CLP contained between 0 (P. cepacia lipases) and 6 (porcine pancreas lipase and Rhizopus oryzae lipase) discrete proteolytic bands. Common themes of proteolytic AMW emerged, including 21-23 kDa and 30-35 kDa bands.     

Lipases in the storage tissues of peanut and other oil seeds during germination

The castor-bean endosperm-the best-studied material of reserve lipid hydrolysis in seed germination-was previously shown to have an acid lipase and an alkaline lipase having reciprocal patterns of development during germination. We studied oil seeds from 7 species, namely castor bean (Ricinus communis L.), peanut (Arachis hypogaea L.), sunflower (Helianthus annus L.), cucumber (Cucumis sativus L.), cotton (Gossypisum hirsutum L.), corn (Zea mays. L.) and tomato (Lycopersicon esculentum Mill.). The storage tissues of all these oil seeds except castor bean contained only alkaline lipase activity which increased drastically during germination. The pattern of acid and alkaline lipases in castor bean does not seem to be common in other oil seeds. The alkaline lipase of peanut cotyledons was chosen for further study. On sucrose gradient centrifugation of cotyledon homogenate from 3-d-old seedlings, about 60% of the activity of the enzyme was found to be associated with the glyoxysomes, 15% with the mitochondria, and 25% with a membrane fraction at a density of 1.12 g cm^-3. The glyoxysomal lipase was associated with the organelle membrane, and hydrolyzed only monoglyceride whereas the mitochondrial and membrane-fraction enzymes degraded mono-, di- and triglycerides equally well. Thus, although the lipase in the glyoxysomes had the highest activity, it had to cooperate with lipases in other cellular compartments for the complete hydrolysis of reserve triglycerides.     

Morphological,biochemical and kinetic properties of lipase from Candida rugosa immobilized in zirconium phosphate

Zirconium phosphate (ZrP), a low-cost inorganic material with well-defined physicochemical properties, was successfully used as support for immobilizing Candida rugosa lipase by covalent bonding. The immobilized derivative showed high catalytic activity in both aqueous and non-aqueous media. Fourier transform infrared spectroscopy, X-ray diffraction, and scanning electron microscopy measurements demonstrated that the ZrP fulfilled the morphological requirements for use as a matrix for immobilizing lipases. The free and immobilized lipases were compared in terms of pH, temperature and thermal stability. The immobilized lipase had a higher pH optimum (7.5) and higher optimum temperature (50°C) than the free lipase. Immobilization also increased the thermal stability. The hydrolysis of p-nitrophenyl palmitate (pNPP) by immobilized lipase, examined at 37°C, followed Michaelis–Menten kinetics. Values for K_m=1.18 µM and V_max=325Umg^?1 indicated that the immobilized system was subject to mass transfer limitations. The immobilized derivative was also tested under repetitive reaction batches in both ester hydrolysis and synthesis.     

Production of Ricinoleic Acid from Castor Oil by Immobilised Lipases

Abstract

Porcine pancreatic lipase (PPL), Candida rugosa lipase (CRL), and Castor bean lipase (CBL) were immobilized on celite by deposition from aqueous solution by the addition of hexane. Lipolytic performance of free and immobilized lipases were compared and optimizations of lipolytic enzymatic reactions conditions were performed by free and immobilized derivatives using olive oil as substrate. Afterwards, the influence on lipolysis of castor oil of free lipases and immobilized lipase derivatives have been studied in the case of production of ricinoleic acid. All of the lipases performances were compared and enzyme derivative was selected to be very effective on the production of ricinoleic acid by lipolysis reaction. Various reaction parameters affecting the production of ricinoleic acid were investigated with selected the enzyme derivative.

The maximum ricinoleic acid yield was observed at pH 7–8, 50°C, for 3 hours of reaction period with immobilized 1,3-specific PPL on celite. The kinetic constants K_m and V_max were calculated as 1.6 × 10^?4 mM and 22.2 mM from a Lineweaver–Burk plot with the same enzyme derivative. To investigate the operational stability of the lipase, the three step lipolysis process was repeated by transferring the immobilized lipase to a substrate mixture. As a result, the percentange of conversion after usage decreased markedly.     

Acyl migration during deacylation of phospholipids rich in docosahexaenoic acid (DHA): an enzymatic approach for evidence and study

Non-enzymatic acyl migration could be counter-productive for the preparation of structured phospholipids with docosahexaenoic acid (DHA) at a designated position. Therefore enzymatic approaches have been developed to investigate acyl migration. First, acyl migration from sn-2 to sn-1 position has been set into relief by a three step enzymatic method using a typo-selective lipase, a phospholipase A2 and a non-selective lipase. The effect of reaction temperature on acyl migration from sn-2 to sn-1 was monitored: lowering the reaction temperature from 40 to 30°C allowed a reduction of DHA migration rate of 40%. Secondly, acyl migration from sn-1 to sn-2 position was negligible. This last result was obtained through the study of structured phosphatidylcholine selective deacylation using a phospholipase A2.     

Cloning and expression of novel lipase from entomopathogenic fungi,Beauveria bassiana

Lipase, which catalyzes the hydrolysis of triacylglycerol, is one of the enzymes of interest in the bio-industry. In this study, strains of entomopathogenic fungi were screened for their lipase activity and the characteristics of lipase isolated from Beauveria bassiana JEF-351 strain showing high lipase activity were investigated. Lipase gene of B. bassiana JEF-351 strain, BBL351, was introduced into the genome of Autographa californica nucleopolyhedrovirus (AcMNPV) and recombinant lipases were expressed as non-secreted and secreted protein, respectively. Enzyme activity of BBL351 was higher when the protein was expressed as secreted form, demonstrating that post-translational modification such as glycosylation is crucial for enzyme activity. In addition, the enzyme activity of BBL351 was higher than that of CML, which is an sn-1(3) regioselective lipase reported from Cordyceps militaris. These results suggested that the lipase derived from the B. bassiana JEF-351 strain could be useful as biocatalyst in the biotechnological applications.     

In vitro stereoselective hydrolysis of diacylglycerols by hormone-sensitive lipase

Hormone-sensitive lipase (HSL) contributes importantly to the mobilization of fatty acids in adipocytes and shows a substrate preference for the diacylglycerols (DAGs) originating from triacylglycerols. To determine whether HSL shows any stereopreference during the hydrolysis of diacylglycerols, racemic 1,2(2,3)-sn-diolein was used as a substrate and the enantiomeric excess (ee%) of residual 1,2-sn-diolein over 2,3-sn-diolein was measured as a function of DAG hydrolysis. Enantiomeric DAGs were separated by performing chiral-stationary-phase HPLC after direct derivatization from lipolysis product extracts. The fact that the ee% of 1,2-sn-diolein over 2,3-sn-diolein increased with the level of hydrolysis indicated that HSL has a preference for 2,3-sn-diolein as a substrate and therefore a stereopreference for the sn-3 position of dioleoylglycerol. The ee% of 1,2-sn-diolein reached a maximum value of 36% at 42% hydrolysis. Among the various mammalian lipases tested so far, HSL is the only lipolytic carboxylester hydrolase found to have a pronounced stereospecificity for the sn-3 position of dioleoylglycerol.     

Lipase-catalyzed regioselective protection/deprotection of hydroxyl groups of the isoflavone irilone isolated from Iris germanica

The regioselective acylation of irilone, isolated from Iris germanica, with vinylacetate and propenylacetate and deacylation of irilone diacetate with n-butanol were studied using lipases from Aspergillus niger, Mucor miehei, Pseudomonas cepacia, Candida cylindracea, porcine pancreas and Candida antarctica. Significant conversion of irilone to 4′-O-acetylirilone was achieved using P. cepacia lipase, while irilone diacetate was converted to 5-O-acetylirilone by the enzymatic action of lipases from M. miechei, P. cepacia and porcine pancreas under different experimental conditions. This preferential protection/deprotection furnishes an opportunity to modify the structure of irilone by selective derivatization that may help to change its biological activities by modifying its amphiphilic/lipophilic balance.     

Fatty Acid Specificity in Lipase-Catalyzed Synthesis of Glucoside Esters

The fatty acid specificity of the B-lipase derived from Candida antarctica was investigated in the synthesis of esters of ethyl D-glucopyranoside. The specificity was almost identical with respect to straight-chain fatty acids with 10 to 18 carbon atoms. However, lower fatty acids such as hexanoic and octanoic acid and the unsaturated 9-cis-octadecenoic acid were found to be poor substrates of the enzyme. As a consequence of this selectivity, these fatty acids were accumulated in the unconverted fraction when ethyl D-glucopyranoside was esterified with an excess of a mixture of fatty acids. This accumulation can reduce the overall effectiveness of the process as the activity of the lipase was found to be reduced when exposed to high concentrations of short-chain fatty acids. Finally, using a simplified experimental set-up, the specificity of the C. antarctica B-lipase was compared to the specificity of lipases derived from C. rugosa, Mucor miehei, Humicola, and Pseudomonas. Apart from the C. rugosa lipase, which exhibited a very poor performance, all the enzymes showed a very similar specificity with respect to fatty acids longer than octanoic acid while only the C. antarctica B-lipase showed activity towards sort-chain fatty acids.     

Three New Lipases from Actinomycetes and Their Use in Organic Reactions

Three novel lipase-producing microorganisms have been isolated from 526 actinomycete strains by employing screening techniques on solid media. Time-course and scale-up of enzyme production were analyzed. The lipases, produced by microorganisms belonging to the Streptomyces genus, were tested in several reactions in organic medium using unnatural substrates. The lyophilized crude lipases are stable at least for 1 month at 4°C (100% recovered activity). The lipase activity per milliliter of cell culture broth was higher than described in the literature for other lipases from actinomycetes. The three selected lipases displayed better activity than commercial lipase from Candida rugosa in the resolution of chiral secondary alcohols. The lipase from S. halstedii also displayed very good activity in the synthesis of carbamates.     

Production and characterization of esterase and lipase from <Emphasis Type="Italic">Haloarcula marismortui</Emphasis>

The present study was conducted to investigate the capability of Haloarcula marismortui to synthesize esterases and lipases, and the effect of physicochemical conditions on the growth and the production of esterases and lipases. Finally, the effect of NaCl concentration and temperature on esterase and lipase activities was studied using intracellular crude extracts. In order to confirm the genomic prediction about the esterase and lipase synthesis, H. marismortui was cultured on a rich medium and the crude extracts (intra- or extracellular) obtained were assayed for both activities using p-nitrophenyl esters and triacylglycerides as substrates. Studies on the kinetics of growth and production of esterase and lipase of H. marismortui were performed, reaching a maximum growth rate of 0.053 h⁻¹ and maximal productions of intracellular esterase and lipase of 2.094 and 0.722 U l⁻¹ using p-nitrophenyl valerate and p-nitrophenyl laurate, respectively. Both enzymes were produced as growth-associated metabolites. The effects of temperature, pH, and NaCl concentration on the growth rate and production of enzymes were studied by using a Box–Behnken response surface design. The three response variables were significantly influenced by the physicochemical factors and an interaction effect between temperature and NaCl concentration was also evidenced. The surface response method estimated the following maximal values for growth rate and productions of esterase and lipase: 0.086 h⁻¹ (at 42.5°C, pH 7.4, and 3.6 mol l⁻¹ NaCl), 2.3 U l⁻¹ (at 50°C, pH 7.5, and 4.3 mol l⁻¹ NaCl), and 0.58 U l⁻¹ (at 50°C, pH 7.6, and 4.5 mol l⁻¹ NaCl), respectively. Esterases were active at different salt concentrations, showing two optimal activities (at 0.5 and 5 mol l⁻¹ NaCl), which suggested the presence of two different esterases. Interestingly, in the absence of salt, esterase retained 50% residual activity. Esterases and lipase activities were maximal at 45°C and inactive at 75°C. This study represents the first report evidencing the synthesis of esterase and lipase by H. marismortui.     

Lipase-catalyzed regioselective synthesis of steryl (6′-<Emphasis Type="Italic">O</Emphasis>-acyl)glucosides

The regioselective acylation of cholesteryl β-d-glucoside, at the C-6 of the glucose moiety, was achieved using microbial lipases in organic solvents. With palmitic acid as an acyl donor 81 or 63% conversions of cholesteryl glucoside to its 6′-O-palmitoyl derivative were obtained using Candida antarctica or Rhizomucor miehei enzymes, respectively. High yields (64–92%) were also obtained with fatty acids 6:0–22:0 and 16:1 (n-7). The synthesis of cholesteryl (6′-O-palmitoyl)glucoside was also achieved via transesterification, using mono-, di- and tri-palmitoylglycerols or methyl and ethyl palmitate as acyl sources. With R. miehei lipase transesterification between methyl palmitate (80 mM) and cholesteryl glucoside (1 mM) proceeded after 24 h with a nearly quantitative yield (97%).     

Substrate specificity,regioselectivity and hydrolytic activity of lipases activated from Geotrichum sp.

Substrate specificity (typoselectivity), regioselectivity and hydrolytic activity of induced lipases from three strains (4012, 4013, 4166) of Geotrichum candidum and that of Geotrichum ludwigii (48) were investigated. The lipases were induced in two types of culture media, of which the medium containing peptone as nitrogen source was proved to give better results. Olive oil was employed as inductor for the lipase activity. Activated lipases represented mostly extracelullar lipases, which penetrated through cellular membrane into medium. The activity of cell-bound lipase was also determined. Most of lipases belong to the group of specific lipases able to hydrolyse ester bonds in the positions sn-1 and sn-3 ester of triacylglycerols (1,3-selective lipases) and display specificity to saturated fatty acids. All activated lipases from Geotrichum sp., extracellular and cell-bound, were used as biocatalyst in the blackcurrant oil hydrolysis.     

Gene Cloning,Expression, and Characterization of the <Emphasis Type="Italic">Geobacillus Thermoleovorans</Emphasis> CCR11 Thermoalkaliphilic Lipase

The gene for a Geobacillus thermoleovorans CCR11 thermostable lipase was recovered by PCR and cloned. Four genetic constructions were designed and successfully expressed in E. coli: (i) the lipase structural gene (lipCCR11) in the PinPoint Xa vector; (ii) the lipase structural gene (lipACCR11) in the pET-28a(+) vector; (iii) the lipase structural gene minus the signal peptide (lipMatCCR11) in the pET-3b vector; and (iv) the lipase structural gene plus its own promoter (lipProCCR11) in the pGEM-T cloning vector. The lipase gene sequence analysis showed an open reading frame of 1,212 nucleotides coding for a mature lipase of 382 residues (40 kDa) plus a 22 residues signal peptide. Expression under T7 and T7lac promoter resulted in a 40- and 36-fold increase in lipolytic activity with respect to the original strain lipase. All recombinant lipases showed an optimal activity at pH 9.0, but variations were found in the temperature for maximum activity and the substrate specificity among them and when compared with the parental strain lipase, especially in the recombinant lipases that contained fusion tags. Therefore, it is important to find the appropriate expression system able to attain a high concentration of the recombinant lipase without compromising the proper folding of the protein.     

Genetic organization of the putative salbostatin biosynthetic gene cluster including the 2-<Emphasis Type="Italic">epi</Emphasis>-5-<Emphasis Type="Italic">epi</Emphasis>-valiolone synthase gene in <Emphasis Type="Italic">Streptomyces albus</Emphasis> ATCC 21838

In this paper, we provide the first report of utilizing recombinant fungal whole cells in enzymatic biodiesel production. Aspergillus oryzae, transformed with a heterologous lipase-encoding gene from Fusarium heterosporum, produced fully processed and active forms of recombinant F. heterosporum lipase (FHL). Cell immobilization within porous biomass support particles enabled the convenient usage of FHL-producing A. oryzae as a whole-cell biocatalyst for lipase-catalyzed methanolysis. The addition of 5% water to the reaction mixture was effective in both preventing the lipase inactivation by methanol and facilitating the acyl migration in partial glycerides, resulting in the final methyl ester content of 94% even in the tenth batch cycle. A comparative study showed that FHL-producing A. oryzae attained a higher final methyl ester content and higher lipase stability than Rhizopus oryzae, the previously developed whole-cell biocatalyst. Although both FHL and R. oryzae lipase exhibit 1,3-regiospecificity towards triglyceride, R. oryzae accumulated a much higher amount of sn−2 isomers of partial glycerides, whereas FHL-producing A. oryzae maintained a low level of the sn−2 isomers. This is probably because FHL efficiently facilitates the acyl migration from the sn−2 to the sn−1(3) position in partial glycerides. These findings indicate that the newly developed FHL-producing A. oryzae is an effective whole-cell biocatalyst for enzymatic biodiesel production.     

Two acidothermotolerant lipases from new variants of Bacillus spp.

Two acidothermotolerant lipases from new isolates of Bacillus stearothermophilus SB-1 and Bacillus licheniformis SB-3 are reported. In addition, a thermotolerant, neutral lipase from Bacillus atrophaeus SB-2 that hydrolyses castor oil is also reported. The lipase from B. stearothermophilus SB-1 retained 70% activity and that from B. licheniformis SB-3 retained 50% activity at pH 3.0 at 50 °C. In addition, at 100 °C B. stearothermophilus SB-1 lipase had a half life of 25 min at pH 3.0 and 15 min at pH 6.0. Lipase activity was markedly stimulated by glycerol in case of B. stearothermophilus SB-1 and by diethylether in cases of B. atrophaeus SB-2 and B. licheniformis SB-3. The lipases varied in their substrate specificity towards triacylglycerols. The rate of hydrolysis of neem oil with B. stearothermophilus SB-1 and B. atrophaeus SB-2 lipases was, respectively, nearly 4-fold and 2-fold more than with olive oil.     

Amino acid modified chitosan beads: Improved polymer supports for immobilization of lipase from Candida rugosa

Amino acid modified chitosan beads (CBs) for immobilization of lipases from Candida rugosa were prepared by activation of a chitosan backbone with epichlorohydrin followed by amino acid coupling. The beads were analyzed by elemental analysis and solid state NMR with coupling yields of the amino acids ranging from 15 to 60%. The immobilized lipase on unmodified chitosan beads showed the highest immobilization yield (92.7%), but its activity was relatively low (10.4%). However, in spite of low immobilization yields (15–50%), the immobilized lipases on the amino acid modified chitosan beads showed activities higher than that of the unmodified chitosan beads, especially on Ala or Leu modified chitosan beads (Ala-CB or Leu-CB) with 49% activity for Ala-CB and 51% for Leu-CB. The immobilized lipases on Ala-CB improved thermal stability at 55 °C, compared to free and immobilized lipases on unmodified chitosan beads and the immobilized lipase on Ala-CB retained 93% of the initial activity when stored at 4 °C for 4 weeks. In addition, the activity of the immobilized lipase on Ala-CB retained 77% of its high initial activity after 10 times of reuse. The kinetic data (k_cat/K_m) supports that the immobilized lipase on Ala-CB can give better substrate specificity than the unmodified chitosan beads.