Metal compounds as tools for the construction and the interpretation of medium-resolution maps of ribosomal particles.

Procedures were developed exploiting organometallic clusters and coordination compounds in combination with heavy metal salts for derivatization of ribosomal crystals. These enabled the construction of multiple isomorphous replacement (MIR) and multiple isomorphous replacement combined with anomalous scattering medium-resolution electron density maps for the ribosomal particles that yield the crystals diffracting to the highest resolution, 3 A, of the large subunit from Haloarcula marismortui and the small subunit from Thermus thermophilus. The first steps in the interpretation of the 7. 3-A MIR map of the small subunit were made with the aid of a tetrairidium cluster that was covalently attached to exposed sulfhydryls on the particle's surface prior to crystallization. The positions of these sulfhydryls were localized in difference Fourier maps that were constructed with the MIR phases.     

Novel procedures for derivatization of ribosomes for crystallographic studies

Undecagold and tetrairidium clusters have been used for the preparation of heavy-metal derivatives of ribosomal particles, necessary for the evaluation of phases in the x-ray structure determination of these large particles. To obtain specific binding, monofunctional reagents of the clusters were prepared and were covalently bound to free sulfhydryl groups on the surface of the ribosome. In addition, a mutant of Bacillus stearothermophilus which lacks one ribosomal protein (BL11) was grown. The heavy-atom clusters were covalently bound to isolated protein BL11, and the modified protein was consequently reconstituted into the mutated ribosomal subunits. Crystallographic data have been collected from crystals of native particles, from the mutated ones, and from the iridium- and gold-derivatized subunits. All these crystal forms are isomorphous within the experimental error.     

Crystallization and main-chain structure of neutral protease from Streptomyces caespitosus

A neutral protease, i.e., a zinc-containing metalloendoprotease from Streptomyces caespitosus, has been crystallized using acetone as a precipitating agent. The crystals diffract to better than 1.5 A resolution when a rotating anode X-ray generator is used as an X-ray source. Protein phase angles were calculated by the multiple isomorphous replacement method using two heavy-atom derivatives (HgCl2 and CH3HgCl). A 6 A resolution electron density map clearly showed molecular boundaries. Although its amino acid sequence is not known, the folding pattern of the polypeptide chain could be traced on a 2.5 A resolution electron density map. A large cleft, which is located on the molecular surface, was proved to be the active site of the enzyme by structure analyses of inhibitor-complex crystals. The highest electron density peak, which corresponds to the cleft, was assigned to a catalytically essential zinc atom on difference Fourier synthesis between native and EDTA-soaked crystals.     

Approaching the molecular structure of ribosomes

Fifteen forms of three-dimensional crystals and three forms of two-dimensional sheets from ribosomal particles have been grown. In all cases only biologically active particles could be crystallized, the crystalline material retaining its integrity and biological activity for months. Cryastallographic data have been collected from crystals of 50 S ribosomal subunits, using synchrotron radiation, at temperatures between 19 and -180 degree C. Although at around 0 degrees C in the synchrotron X-ray beam the crystals rapidly lose their high-resolution reflections, at cryo-temperatures hardly any radiation damage occurs over long periods, and a complete set of diffraction data to about 6 A resolution could be collected from a single crystal. Heavy-atom clusters were used for soaking as well as for specific binding to the surface of the ribosomal subunits prior to crystallization. The 50 S ribosomal subunits from a mutant of Bacillus stearothermophilus which lacks the ribosomal protein BL11 crystallize isomorphously with the native form. Models of the entire 70 S ribosome and of the 50 S subunit have been reconstructed from two-dimensional sheets at 47 and 30 A, respectively. These models demonstrate the overall shape of the particles, the contact areas between large and small subunits, the space where protein biosynthesis may take place and a tunnel through the 50 S subunit which could provide a path for the nascent polypeptide chain.     

Targeting exposed RNA regions in crystals of the small ribosomal subunits at medium resolution.

Within the framework of ribosomal crystallography, the small subunits are being analyzed, using crystals diffracting to 3 A resolution. The medium resolution electron density map of this subunit, obtained by multiple isomorphous replacement, show recognizable morphologies, strikingly similar to the functional active conformer of the small ribosomal subunit. It contains elongated dense features, traceable as RNA chains as well as globular regions into which the structures determined for isolated ribosomal proteins, or other known structural motifs were fitted. To facilitate unbiased map interpretation, metal clusters are being covalently attached either to the surface of the subunits or to DNA oligomers complementary to exposed ribosomal RNA. Two surface cysteines and the 3' end of the 16S ribosomal RNA have been localized. Targeting several additional RNA regions shed light on their relative exposure and confirmed previous studies concerning their functional relevance.     

The introduction of specific sites for heavy metal binding in a crystalline protein

Heavy metal derivatives of the galactose binding protein of Salmonella typhimurium were obtained by the treatment of crystals with carbon disulfide under anaerobic conditions, followed by exposure to mercury-containing reagents. Carbon disulfide reacts with protein amino groups to give a metastable dithiocarbamate, which is susceptible to covalent derivatization by mercurials. The number of amino groups which react for any particular crystalline protein will depend on the pH, the composition of the crystal mother liquor, and the steric accessibility limitations imposed by crystal packing. Direct reaction with protein crystals, rather than solution derivatization followed by purification and subsequent crystallization, is used to promote isomorphism of the derivative crystal with the native and to limit the number of available sites. For the S. typhimurium galactose binding protein, carbon disulfide treatment, followed by reaction with 2-chloromercuri-4-nitrophenol, resulted in binding at two sites at pH 8.0. Similar treatment with dimercury acetate gave one binding site for the dimercurial at the same pH. Both derivatives were isomorphous with the native crystal to a resolution of at least 3.5 A. These heavy atom derivatives have been used to produce an interpretable electron density map of the protein at 3-A resolution.     

Preliminary crystal structure of Acinetobacter glutaminasificans glutaminase-asparaginase

The preliminary structure of a glutaminase-asparaginase from Acinetobacter glutaminasificans is reported. The structure was determined at 3.0-A resolution with a combination of phase information from multiple isomorphous replacement at 4-5-A resolution and phase improvement and extension by two density modification techniques. The electron density map was fitted by a polypeptide chain that was initially polyalanine. This was subsequently replaced by a polypeptide with an amino acid sequence in agreement with the sizes and shapes of the side chain electron densities. The crystallographic R factor is 0.300 following restrained least squares refinement with data to 2.9-A resolution. The A. glutaminasificans glutaminase-asparaginase subunit folds into two domains: the aminoterminal domain contains a five-stranded beta sheet surrounded by five alpha helices, while the carboxyl-terminal domain contains three alpha helices and less regular structure. The connectivity is not fully determined at present, due in part to the lack of a complete amino acid sequence. The A. glutaminasificans glutaminase-asparaginase structure has been used successfully to determine the relative orientations of the molecules in crystals of Pseudomonas 7A glutaminase-asparaginase, in crystals of Vibrio succinogenes asparaginase, and in a new crystal form of Escherichia coli asparaginase (space group 1222, one subunit per asymmetric unit).     

X-ray diffraction study of di and tetra-ligated T-state hemoglobin from high salt crystals.

X-ray diffraction difference electron density maps at 3 A resolution obtained from di and tetra-ligated T-state hemoglobin (Hb) crystals are reported. Crystals isomorphous with native deoxyhemoglobin were obtained from ammonium sulfate solutions incubated with the synthetic allosteric effector RSR-56. RSR-56 binds at two symmetry-related Hb central water cavity sites and each molecule has major interactions with three different subunit side-chains; one effector with Arg141 alpha 2 HC3, Lys99 alpha 1 G6 and Asn108 beta 1 and the other with the symmetry related residues, Arg141 alpha 1 Lys99 alpha 2 and Asn108 beta 2. Crystals mounted in a nitrogen filled glove box were di-ligated as previously found with polyethyleneglycol Hb crystals. Crystals mounted in air under a layer of mother liquor were bright red and showed all four heme groups ligated. The difference electron density from the di-ligated crystals showed atomic movements to be restricted to the immediate neighborhood of the heme groups and the allosteric effector. By contrast, the tetra-ligated structure showed extended difference electron density near amino acid residues around both alpha and beta heme groups and along the alpha 1/beta 2 interface. Ligation of the beta heme group appears to magnify the difference density around the alpha heme groups. There is no evidence of breakage of the Bohr salt bridge, His146 beta HC3----Asp94 beta FG1, in the crystal. The observed difference electron density maps may help to clarify the way the allosteric mechanism is triggered.     

Structure of ferricytochrome c' from Rhodospirillum rubrum at 6 A resolution

The structure of a ferricytochrome c' extracted from Rhodospirillum rubrum has been determined at 6 A resolution by the X-ray crystallographic method. The crystals, obtained by dialyzing the protein solution against polyethylene glycol 4000, belong to the hexagonal space group P6(1). Two heavy atom derivatives were obtained by soaking the native crystals in K2PtCl6 and CH3HgCl solution. The phases calculated by the multiple isomorphous replacement method gave an overall figure of merit of 0.90 at 6 A resolution. The resulting electron density map showed the molecular boundary clearly, and gave molecular dimensions of 50 X 25 X 30 A for a monomer molecule. From visual examination of this map, the cytochrome c' from Rhodospirillum rubrum has a similar chain-folding pattern to the cytochrome c' from Rhodospirillum molischianum, the structure determination of which has already been carried out.     

Pitfalls in the interpretation of structural changes in mutant proteins from crystal structures

PpcA is a small protein with 71 residues that contains three covalently bound hemes. The structures of single mutants at residue 58 have shown larger deviations in another part of the protein molecule than at the site of the mutation. Closer examination of the crystal packing has revealed the origin of this unexpected structural change. The site of mutation is within Van der Waals distance from another protein molecule related by a crystallographic twofold axis within the crystal. The structural changes occurred at or near the mutation site have led to a slight adjustment of the surface residues in contact. The observed deviations between the native and the mutant molecular structures are derived from the new crystal packing even though the two crystals are essentially isomorphous. Without careful consideration of the crystal lattice a non-expert looking at only the coordinates deposited in the Protein Data Bank could draw erroneous conclusion that mutation in one part of the molecule affected the structure of the protein in a distant part of the molecule.     

Structure of CaATPase: electron microscopy of frozen-hydrated crystals at 6 A resolution in projection

Thin, three-dimensional crystals of CaATPase have been studied at high resolution by electron crystallography. These crystals were grown by adding purified CaATPase to appropriate concentrations of lipid, detergent and calcium. A thin film of crystals was then rapidly frozen and maintained in the frozen-hydrated state during electron microscopy. The resulting electron diffraction patterns extend to 4.1 A resolution and images contain phase data to 6 A resolution. By combining Fourier amplitudes from electron diffraction patterns with phases from images, a density map has been calculated in projection. Comparison of this map from unstained crystals with a previously determined map from negatively stained crystals reveals distinct contributions from intramembranous and extramembranous protein domains. On the basis of this distinction and of the packing of molecules in the crystal, we have proposed a specific arrangement for the ten alpha-helices that have been suggested as spanning the bilayer.     

Production and crystallization of a selenomethionyl variant of UmuD′, an Echerichia coli SOS response protein

Crystals of both native and mutant Escherichia coli UmuD′ protein were obtained using the hanging drop method. Soaking the native crystals in solutions of heavy metal ions failed to produce good isomorphous derivatives, and selenomethionine substituted wild-type protein did not crystallize under conditions that gave native crystals. Site-directed mutagenesis was used to change the penultimate residue, a methionine amino acid, to either a valine or a threonine amino acid. Crystals were subsequently obtained from these mutant proteins with and without selenomethionine Incorporation. Crystals of the native, the mutant, and the selenomethionine Incorporated protein were all similar, crystallizing in the P4₁2₁2 space group. © 1996 Wiley-Liss, Inc.     

Pf1 Inovirus. Electron density distribution calculated by a maximum entropy algorithm from native fibre diffraction data to 3 A resolution and single isomorphous replacement data to 5 A resolution

We have calculated the electron density distribution of the Pf1 strain of filamentous bacteriophage by a maximum entropy method. In the calculation we included native X-ray fibre diffraction data extending to 3 A resolution in the meridional direction on 60 layerlines that are resolved to 4 A in the equatorial direction, and lower resolution data from a single isomorphous derivative iodinated on the Tyr25 residue. The electron density map indicates that the 46-residue protein subunit is a single, gently curved stretch of alpha-helix with its axis at an angle of about 20 degrees to the axis of the virion. The alpha-helix subunit curves around the virion axis by about 1/6 turn, and decreases from about 27 A radius to about 13 A radius in the virion as the amino acid sequence of the subunit runs from the N terminus to the C terminus. Nearest-neighbour alpha-helical subunits are about 10 A apart along their length, and the axis of each subunit makes an unexpected negative angle with its nearest neighbours in the virion. To confirm the validity of the maximum entropy calculation, we have varied the constraints on the calculation. All variations result in either a map that is close to the original map or a map that cannot be interpreted in terms of secondary structure: we find only one map that makes structural sense.     

Crystallization and preliminary X-ray analysis of the catalytic domain of chitinase D from Bacillus circulans WL-12

We report here on crystallization and preliminary X-ray analysis of the catalytic domain of chitinase D from Bacillus circulans WL-12. The native crystals of this domain were found to belong to the orthorhombic space group P2(1)2(1)2(1). To elucidate the structure of the catalytic domain by the multiple isomorphous replacement method, 30 kinds of derivatized crystals were prepared by soaking the native crystals into a mother liquor containing salts of heavy metal atoms. Difference Patterson maps calculated for four derivatives showed strong peaks in the Harker sections.     

The structure of cytochrome b562 from Escherichia coli at 2.5 A resolution.

The structure of cytochrome b562 from Escherichia coli has been determined at 2.5 A resolution by x-ray diffraction methods. Protein phases were computed by the single isomorphous replacement method with anomalous scattering measurements from the native and uranyl acetate-substituted crystals. The electron density was averaged about the noncrystallographic 2-fold axis relating 2 molecules in the triclinic unit cell. The protein consists of four nearly parallel alpha helices and represents a new class of cytochrome structure. The heme group is inserted between the helices near one end of the molecule with one heme face partially exposed to solvent. The two heme ligands are histidine and methionine. The 2 phenylalanines are packed internally near the heme group, and the 2 tyrosines are on the surface, also near the heme group. The folding of the protein resembles that of hemerythrin and tobacco mosaic virus protein and shows a different topology from that of cytochrome b5, cytochrome c, or the globins.     

X-ray structure of lipoamide dehydrogenase from Azotobacter vinelandii determined by a combination of molecular and isomorphous replacement techniques

The crystal structure of lipoamide dehydrogenase from Azotobacter vinelandii has been determined by a combination of molecular replacement and isomorphous replacement techniques yielding eventually a good-quality 2.8 A electron density map. Initially, the structure determination was attempted by molecular replacement procedures alone using a model of human glutathione reductase, which has 26% sequence identity with this bacterial dehydrogenase. The rotation function yielded the correct orientation of the model structure both when the glutathione reductase dimer and monomer were used as starting model. The translation function could not be solved, however. Consequently, data for two heavy-atom derivatives were collected using the Hamburg synchotron facilities. The derivatives had several sites in common, which was presumably a major reason why the electron density map obtained by isomorphous information alone was of poor quality. Application of solvent flattening procedures cleaned up the map considerably, however, showing clearly the outline of the lipoamide dehydrogenase dimer, which has a molecular weight of 100,000. Application of the "phased translation function", which combines the phase information of both isomorphous and molecular replacement, led to an unambiguous determination of the position of the model structure in the lipoamide dehydrogenase unit cell. The non-crystallographic 2-fold axis of the dimer was optimized by several cycles of constrained-restrained least-squares refinement and subsequently used for phase improvement by 2-fold density averaging. After ten cycles at 3.5 A, the resolution was gradually extended to 2.8 A in another 140 cycles. The 2.8 A electron density distribution obtained in this manner was of much improved quality and allowed building of an atomic model of A. vinelandii lipoamide dehydrogenase. It appears that in the orthorhombic crystals used each dimer is involved in contacts with eight surrounding dimers, leaving unexplained why the crystals are rather fragile. Contacts between subunits within one dimer, which are quite extensive, can be divided into two regions separated by a cavity. In one of the contact regions, the level of sequence identity with glutathione reductase is very low but it is quite high in the other. The folding of the polypeptide chain in each subunit is quite similar to that of glutathione reductase, as is the extended conformation of the co-enzyme FAD.(ABSTRACT TRUNCATED AT 400 WORDS)     

Preliminary crystal structure studies of a ternary electron transfer complex between a quinoprotein, a blue copper protein, and a c-type cytochrome.

A ternary electron transfer protein complex has been crystallized and a preliminary structure investigation has been carried out. The complex is composed of a quinoprotein, methylamine dehydrogenase (MADH), a blue copper protein, amicyanin, and a c-type cytochrome (c551i). All three proteins were isolated from Paracoccus denitrificans. The crystals of the complex are orthorhombic, space group C222(1) with cell dimensions a = 148.81 A, b = 68.85 A, and c = 187.18 A. Two types of isomorphous crystals were prepared: one using native amicyanin and the other copper-free apo-amicyanin. The diffraction data were collected at 2.75 A resolution from the former and at 2.4 A resolution from the latter. The location of the MADH portion was determined by molecular replacement. The copper site of the amicyanin molecule was located in an isomorphous difference Fourier while the iron site of the cytochrome was found in an anomalous difference Fourier. The MADH from P. denitrificans (PD-MADH) is an H2L2 hetero-tetramer with the H subunit containing 373 residues and the L subunit 131 residues, the latter containing a novel redox cofactor, tryptophan tryptophylquinone (TTQ). The amicyanin of P. denitrificans contains 105 residues and the cytochrome c551i contains 155 residues. The ternary complex consists of one MADH tetramer with two molecules of amicyanin and two of c551i, forming a hetero-octamer; the octamer is located on a crystallographic diad. The relative positions of the three redox centers--i.e., the TTQ of MADH, the copper of amicyanin, and the heme group of c55li--are presented.     

Cloning, sequencing, and overexpression of genes for ribosomal proteins from Bacillus stearothermophilus

Although a low resolution model for the arrangement of the proteins of the small and large ribosomal subunits is known, a detailed mechanistic understanding of the function of the ribosome awaits a high resolution structure of its components. While crystals have been obtained of several ribosomal proteins from Bacillus stearothermophilus, determination of atomic resolution structures of these proteins is impeded by the difficulty of obtaining large amounts of native proteins for crystallographic or NMR studies. We describe here the cloning and overexpression in Escherichia coli of the genes for ribosomal proteins S5, L6, L9, and L18 from B. stearothermophilus. S5 is extremely toxic to E. coli when overexpressed, and we have taken advantage of a new tightly regulated expression system to obtain high yields (more than 100 mg of pure protein/liter of culture) of this protein. The B. stearothermophilus S5 produced in E. coli crystallizes, and the crystals are identical to those obtained from the native protein. The crystals diffract to 2-A resolution.     

Lipid bilayer ultrastructure: Electron density profiles and chain tilt angles as determined by X-ray diffraction

High resolution (6 Å) electron density profiles have been computed on an absolute electron density scale for bilayers composed of both saturated fatty acids and fatty acids associated with the alkaline earth series of divalent cations. Low-angle X-ray diffraction data have been interpreted by an isomorphous replacement technique. The position on the X-ray film of discrete wide-angle reflections has provided direct information on the hydrocarbon chain packing and chain tilt in these bilayers. These results have been correlated to an electron microscopy study of the same bilayers (Waldbilling, R. C., Robertson J. D. and McIntosh, T.J. (1976) Biochim. Biophys. Acta 448, 1–14) and also to X-ray diffraction studies of fatty acid crystals. A method for forming and structurally analyzing bilayers of well defined chemical asymmetry is also described.