Enantiomeric separation of tramadol hydrochloride and its metabolites by cyclodextrin-mediated capillary zone electrophoresis

The enantiomeric separation of tramadol hydrochloride and its major metabolites, O-demethyltramadol (M1) and N-demethyltramadol (M2) was studied using cyclodextrin (CD)-mediated capillary zone electrophoresis (CZE). Influence of the choice of type and concentration of CD, capillary temperature, length of capillaries, buffer pH and the addition of polymer modifier on the chiral separation of tramadol and its metabolites was evaluated. It was found that the drug and the metabolites can be baseline-separated simultaneously by using 50 mM phosphate buffer (pH 2.5) containing 75 mM methyl-β-CD, 220 mM urea and 0.05% (w/v) hydroxypropylmethyl cellulose.     

High-speed microchip electrophoresis method for the separation of (R,S)-naproxen

In this research, a capillary electrophoretic method for the fast enantiomeric resolution of (R,S)-naproxen was investigated. Method development involved variation of applied potential, buffer concentration, buffer pH, and cyclodextrin concentration. The optimum electrophoretic separation conditions were 110 mM sodium acetate run buffer (pH 6.0), 30 mM methyl-beta-cyclodextrin, 20% (v/v) acetonitrile, 25 degrees C. The total length of capillary was 48 cm, (50 microm I.D.) with ultra violet (UV) detection at 232 nm. Using these conditions, the number of theoretical plates was close to one million (896,000/m). The possibility of achieving a fast chiral separation of (R,S)-naproxen on a microchip of 2.5 cm in length was investigated. Complete enantiomeric resolution of naproxen was achieved in less than 1 min, on this microchip platform, with linear imaging UV detection. This system had the advantage of real-time separation monitoring, so that enantiomeric resolution could be visually observed, and high-speed chiral analysis was realized. The microchip electrophoresis (MCE) separation was compared with the capillary electrophoresis (CE) separation with regards to speed, efficiency, separation platform, and precision. This work highlights the potential of CE and MCE in future chiral separations.     

Chiral Separation of Four Stereoisomers of Ketoconazole Drugs Using Capillary Electrophoresis

This work aimed to develop a chiral separation method of ketoconazole enantiomers using electrokinetic chromatography. The separation was achieved using heptakis (2, 3, 6‐tri‐O‐methyl)‐β‐cyclodextrin (TMβCD), a commonly used chiral selector (CS), as it is relatively inexpensive and has a low UV absorbance in addition to an anionic surfactant, sodium dodecyl sulfate (SDS). The influence of TMβCD concentration, phosphate buffer concentration, SDS concentration, buffer pH, and applied voltage were investigated. The optimum conditions for chiral separation of ketoconazole was achieved using 10 mM phosphate buffer at pH 2.5 containing 20 mM TMβCD, 5 mM SDS, and 1.0% (v/v) methanol with an applied voltage of 25 kV at 25 °C with a 5‐s injection time (hydrodynamic injection). The four ketoconazole stereoisomers were successfully resolved for the first time within 17 min (total analysis time was 28 min including capillary conditioning). The migration time precision of this method was examined to give repeatability and reproducibility with RSDs ≤5.80% (n =3) and RSDs ≤8.88% (n =9), respectively. Chirality 27:223–227, 2015. © 2014 Wiley Periodicals, Inc.     

Optimization of the separation lactic acid enantiomers in body fluids by capillary electrophoresis

The optimization of the separation conditions of the two optical isomers of lactic acid by a factorial design is reported. Initially, different chiral selectors were systematically investigated and then a experimental design with three quantitative factors (cyclodextrin concentration and background buffer pH and concentration) were evaluated. Optimal conditions for obtaining a resolution higher than 1.5 were: phosphate buffer 200 mM at pH=6.0 with 413 mM 2-hydroxypropyl-beta-cyclodextrin added (HP-beta-CD), 20 degrees C, -20 kV of applied potential and polyacrylamide-coated capillary. The method was validated for the measurement in plasma and it was applied to the identification of both isomers in body fluids such as urine, amniotic fluid and cerebrospinal fluid. Samples were centrifuged and diluted (1:4) prior to the analysis.     

Separation and determination of warfarin enantiomers in human plasma samples by capillary zone electrophoresis using a methylated β-cyclodextrin-containing electrolyte

A methyl β-cyclodextrin with a degree of substitution of 1.8 proved to be an effective chiral selector, among other cyclodextrins tested, for the separation of warfarin enantiomers by capillary electrophoresis. The operating conditions were optimized with respect to electrolyte composition (buffer pH, ionic strength, cyclodextrin concentration, methanol content) and applied voltage. The influence of a high ionic strength on the resolution was clearly shown. A baseline separation can be obtained in less than 15 min with an efficiency of ca. 250 000 theoretical plates. These conditions were applied to the determination of warfarin enantiomers in the plasma of patients under warfarin therapy. The limit of detection for the whole procedure (dichloromethane extraction followed by evaporation to dryness and capillary electrophoresis) was of the order of 0.2 mg/l (6.5 · 10⁻⁷M) of each enantiomer.     

Enantiomeric separation of chiral ruthenium(II) complexes using capillary electrophoresis

Capillary zone electrophoresis (CZE) and micellar capillary electrophoresis (MCE) were applied for the enantiomeric separation of nine mononuclear tris(diimine)ruthenium(II) complexes as well as the separation of all stereoisomers of a dinuclear tris(diimine)ruthenium(II) complex. Nine cyclodextrin (CD) based chiral selectors were examined as run buffer additives to evaluate their effectiveness in the enantiomeric separation of tris(diimine)ruthenium(II) complexes. Seven showed enantioselectivity. Sulfated gamma-cyclodextrin (SGC), with four baseline and three partial separations, was found to be the most useful chiral selector. In CZE mode, the derivatized gamma-CDs were more effective than beta-CDs while sulfated CDs work better than carboxymethyl CDs. In MCE mode, hydroxypropyl beta-CD separated the greatest number of tris(diimine) ruthenium(II) complexes. The effects of chiral selector concentration, run buffer pH and concentration, the concentration ratio between chiral selector and other factors were investigated.     

Mechanisms of enantiomeric resolution in cyclodextrin-modified capillary electrophoretic separations of binaphthyl compounds

The enantiomers of 1,1′-bi-2-naphthol, 1,1′-binaphthyl diyl hydrogen phosphate, and 1,1′-binaphthyldicarboxylic acid are separated using capillary electrophoresis with cyclodextrins added to the running buffer. It is demonstrated that the type and concentration of cyclodextrin employed are critical for maximum enantiomeric resolution. A modified version of a previously described model of enantiomeric separations in capillary electrophoresis is shown to support the observed separation behavior. Molecular modeling is employed to calculate interaction energies between the various enantiomers and cyclodextrins. A reasonable correlation between these computationally derived interaction energies and separation behavior resulted from a statistical mechanical treatment of the molecular modeling data. The importance of hydrogen bonding in inclusion complex formation was probed and the effects of minimization and solvation in molecular modeling calculations are also discussed. © 1995 Wiley-Liss, Inc.     

Separation of Folinic Acid Diastereomers in Capillary Electrophoresis Using a New Cationic β-Cyclodextrin Derivative

A method for the separation of folinic acid diastereomers by capillary electrophoresis in chiral separation media was developed. Aiming to achieve a good separation of the anionic analytes, a newly synthesized cationic β-cyclodextrin derivative, mono-6-deoxy-6-piperdine-β-cyclodextrin, was applied as the chiral selector. The effect of background electrolyte pH, the concentration of the cyclodextrin additive, and organic modifier on the separation was investigated. A good separation of folinic acid diastereomers was obtained with 30 mmol/L phosphate buffer at pH 6.50 containing 6.0 mmol/L of mono-6-deoxy-6-piperdine-β-cyclodextrin in 10% acetonitrile. Based on the capillary electrophoresis data, the binding constants of each diastereomer with mono-6-deoxy-6-piperdine-β-cyclodextrin were determined. Moreover, a computational modeling study, using the semi-empirical PM3 method, was used to discuss the possible mechanism of separation of folinic acid with mono-6-deoxy-6-piperdine-β-cyclodextrin.     

Capillary electrophoretic behavior of milk proteins in the presence of non-ionic surfactants

The electrophoretic behavior of α-lactalbumin and β-lactoglobulins (A and B) in the presence of non-ionic surfactants was studied by capillary electrophoresis (CE), using a poly(ethylene glycol) coated capillary column. The surfactants (Tween 20, Brij 35 and 78) were used as buffer additives. The separation is based on the difference in the strength of protein–surfactant association complexes, which results in a change of the effective electrophoretic mobility. The modification of the electrophoretic mobilities of proteins was observed and this variation permitted the estimation of the interaction between protein and surfactant. The effect of surfactant type and concentration on the migration behavior of protein in CE is discussed. It is found that the retention behavior of the milk proteins (the α-lactalbumin and the β-lactoglobulins) in CE is very different. The pH of the buffer and the surfactant type influence significantly the protein–surfactant interactions.     

Enantioseparation of beta-methyl-substituted amino acids with cyclodextrins by capillary zone electrophoresis

Direct capillary zone electrophoretic methods were developed for the separation of the enantiomers of unnatural beta-methyl-amino acids such as erythro- and threo-beta-methylphenylalanine, beta-methyltyrosine, beta-methyltryptophan and beta-methyl-1,2,3,4-tetrahydroisoquinoline-3-carboxylic acid. Capillary zone electrophoresis was carried out using sulfopropylated-alpha-CD (SP2-alpha-CD), sulfopropylated-beta-CD (SP2-beta-CD) both with a degree of substitution of 2 moles/mole cyclodextrin, and sulfopropylated-beta-CD (SP4-beta-CD) with a degree of substitution of 4moles/mole beta-cyclodextrin. The effects of selector and buffer concentrations, electrolyte pH and applied voltage were studied on the separation efficiency. Varying the electrophoretic conditions with application of 20 kV, hydrodynamic injection, unmodified silica capillary, three different buffers (borate, phosphate and acetate) and modified cyclodextrins as chiral selectors all compounds investigated are nearly baseline resolved. The elution sequence was determined in most cases.     

Chiral separation of catechin by capillary electrophoresis using mono‐, di‐, tri‐succinyl‐β‐cyclodextrin as chiral selectors

The chiral separation of (±)‐catechin was investigated by capillary electrophoresis using characterized succinyl‐β‐cyclodextrins (Suc‐β‐CDs) with one to three degree of substitution values. The effects of nature and concentration of Suc‐β‐CDs and running buffer pH on the migration time and resolution of (±)‐catechin are discussed. All three kinds of Suc‐β‐CDs show a clear baseline separation of (±)‐catechin in capillary electrophoresis. Mono‐Suc‐β‐CD effectively separated (±)‐catechin, and additional substituted CDs (di‐ and tri‐Suc‐β‐CD) were capable of chiral separation at a broad pH range. The optimum running conditions were found to be 100 mM borate buffer (pH 9.8) containing 5 mM mono‐Suc‐β‐CD with no methanol organic modifier. Chirality, 2009. © 2009 Wiley‐Liss, Inc.     

Selectivity change in the separation of proteins and peptides by capillary electrophoresis using high-molecular-mass polyethyleneimine

A study of the capillary electrophoretic separations of proteins and peptides using high-molecular-mass polyethyleneimine (PEI) is presented. Experiments were performed in the PEI-coated capillaries together with the use of this polymer as a buffer additive under different separation conditions. The effects of pH and the concentration of PEI in the buffer on the electroosmotic flow and the migration orders of biopolymers were investigated. The use of the cationic polymer offers an alternative for the modification of the separation selectivity and resolution of biopolymers.     

Capillary electrophoresis method for simultaneous determination of penicillin G, procaine and dihydrostreptomycin in veterinary drugs

Capillary electrophoresis method for identification and simultaneous determination of procaine, dihydrostreptomycin and penicillin G, present in multiantibiotic veterinary preparations, was elaborated. The influence of pH (5.0-9.75) and concentration of disodium tetraborate decahydrate in running buffers (0.02-0.1 M) as well as temperatures (25-40 degrees C) on separation efficacy were analyzed. For quantitative analysis, 0.08 M borate buffer (pH 8.0) at 35 degrees C and 15 kV were chosen. Method was validated, selectivity, precision, linearity, LOD, LOQ, accuracy and specificity of capillary zone electrophoresis (CZE) were evaluated.     

Establishment and Evaluation of the Novel Tetramethylammonium‐L‐Hydroxyproline Chiral Ionic Liquid Synergistic System Based on Clindamycin Phosphate for Enantioseparation by Capillary Electrophoresis

Much attention has been paid to chiral ionic liquids (ILs) in analytical chemistry, especially its application in capillary electrophoresis (CE) enantioseparation. However, the investigation of chiral ionic liquids synergistic systems based on antibiotic chiral selectors has been reported in only one article. In this work, a novel chiral ionic liquid, tetramethylammonium‐L‐hydroxyproline (TMA‐L‐Hyp), was applied for the first time in CE chiral separation to evaluate its potential synergistic effect with clindamycin phosphate (CP) as the chiral selector. As observed, significantly improved separation was obtained in this TMA‐L‐Hyp/CP synergistic system compared to TMA‐L‐Hyp or a CP single system. Several primary factors that might influence the separation were investigated, including CP concentration, TMA‐L‐Hyp concentration, buffer pH, types and concentrations of organic modifier, applied voltage, and capillary temperature. The best results were obtained with a 40 mM borax buffer (pH 7.6) containing 30 mM TMA‐L‐Hyp, 80 mM CP, and 20% (v/v) methanol, while the applied voltage and temperature were set at 20 kV and 20°C, respectively. Chirality 27:598–604, 2015. © 2015 Wiley Periodicals, Inc.     

Development of a capillary electrophoresis method for the determination of allopurinol and its active metabolite oxypurinol

A simple and sensitive capillary zone electrophoresis method with UV absorbance detection is described for the quantitation of allopurinol and its metabolite oxypurinol in aqueous solution. The influence of different parameters on migration times, peak symmetry, efficiency and resolution was systematically investigated; these parameters included the nature and concentration of the separation buffer, pH and applied voltage. A buffer consisting of 15 mM 2-[N-cyclohexylamino]ethanesulfonic acid (CHES) adjusted to pH 8.8 was found to provide a very efficient and stable electrophoretic system for the analysis of these compounds. The optimized method was validated with respect to precision, linearity, limits of detection and quantification, accuracy and robustness. The applicability of the assay was demonstrated by analyzing these compounds in serum and allopurinol in commercial pharmaceutical preparations.     

Separation of the eleven priority pollutant phenols by capillary zone electrophoresis

Capillary zone electrophoresis (CZE) provides highly efficient separation of the eleven US EPA priority pollutant phenols. All of these phenols are completely resolved in fewer than 15 min in a 100 cm × 75 μm I.D. uncoated fused-silica capillary at 22.5 kV using a pH 9.8 phosphate-borate buffer. Buffer pH is the most critical parameter controlling resolution and separation time. A simple theoretical treatment greatly simplifies the pH optimization procedure. The effects on the separation of buffer concentration, applied voltage, and sample quantity injected were studied. Good calibration data were obtained for phenol concentrations up to 50 mb/l. Limits of detection for all phenols were less than 1 ppm.     

Chiral separation of 2,3-allenoic acid by capillary zone electrophoresis using cyclodextrin derivatives

In this paper, five of six samples of 2,3-allenoic acid enantiomers were separated by capillary zone electrophoresis (CZE) using hydroxypropyl-beta-cyclodextrin (HP-beta-CD) and hydroxypropyl-gamma-cyclodextrin (HP-gamma-CD) as chiral selectors. Using HP-beta-CD for chiral separation, three of the six enantiomers were separated. Five experimental conditions including HP-beta-CD concentration, pH, buffer concentration, temperature, and running voltage were investigated for their influence on separation and migration using enantiomers of 2-methyl-4-phenyl-2,3-butadienoic acid (A) and 2-(n-propyl)-4-phenyl-2,3-butadienoic acid (B) as samples. Good separation results were observed when [HP-beta-CD] = 3-12 mmol/L and pH = 7-9 for samples A and B. The temperature range of 15-25 degrees C can be selected for convenience. According to the chiral separation results, HP-beta-CD and HP-gamma-CD should be valuable selectors to separate 2,3-allenoic acids and HP-gamma-CD was suggested to separate the 2,3-allenoic acid samples with a group at 4-position bulkier than phenyl.     

Determination of caffeine and its metabolites by micellar electrokinetic capillary electrophoresis

The determination of caffeine and its analogues is important for a wide variety of analyses and is performed in an assortment of matrices ranging from food to clinical samples. While reversed-phase HPLC has become the standard analysis protocol in most laboratories, capillary electrophoresis has the advantages of higher separation efficiency and shorter separation time. The micellar capillary electrophoresis (MECC) separation of caffeine and its metabolites, theobromine, paraxanthine, theophylline and 1,3,7-trimethyluric acid was investigated using sodium dodecyl sulphate (SDS) as the micellar phase. The effects of pH, micelle concentration, buffer concentration, ionic strength, buffer salts, applied voltage and injection time were studied to select the optimum conditions for the determination of caffeine and its four analogues in drugs, foods and body fluids. Caffeine and its three analogues were resolved within 120 s with detection limits less than 1 μg/ml. Samples could be analyzed utilizing direct injection with satisfactory resolution and reproducibility.     

Comparison of chiral recognition capabilities of cyclodextrins for the separation of basic drugs in capillary zone electrophoresis

The enantiomeric separation of some racemic anti-histamines and anti-malarials, namely (±)-pheniramine, (±)-brompheniramine, (±)-chlorpheniramine, (±)-doxylamine, and (±)-chloroquine, was investigated by capillary zone electrophoresis. The enantiomeric separation of five compounds was obtained by addition of 7 mM (1%, w/v) sulfated-β-cyclodextrin into the buffer as a chiral selector. The effects of sulfated-β-cyclodextrin concentration and buffer pH on migration and resolution are discussed. Two other cyclodextrins, carboxyethylated-β-cyclodextrin and hydroxypropyl-β-cyclodextrin were also investigated. Four of the racemic compounds were resolved using 14 mM (2%, w/v) carboxyethylated-β-cyclodextrin while 28 mM (4%, w/v) hydroxypropyl-β-cyclodextrin resolved only two of them. It was found that the type of substituent and the degree of substitution on the rim of the CD structure played an important role in enhancing the chiral recognition. Cyclodextrins with negatively charged substituents and higher degree of substitution on the rim of the structure proved to give better resolution to the cationic racemic compounds compared with cyclodextrin with neutral substituents. This is due to the countercurrent mobility of the negatively charged cyclodextrin relative to the cationic analytes thus allowing for a smaller difference in interaction constants to achieve a successful resolution of enantiomers. Furthermore, lower concentrations of negatively charged cyclodextrins were necessary to achieve the equivalent resolutions as compared with the neutral ones.     

Chiral separation of salbutamol and bupivacaine by capillary electrophoresis using dual neutral cyclodextrins as selectors and its application to pharmaceutical preparations and rat blood samples assay

An attempt for the simultaneous separation of salbutamol (Sal) and bupivacaine (Bup) enantiomers was performed by capillary elecytrophoresis with a dual mixture of neutral cyclodextrins as chiral selector. The influence on the separation of several parameters such as buffer composition, pH, the concentration ratio of 2-hydroxypropyl-beta-cyclodextrin (HP-beta-CD) to dimethyl-beta-cyclodextrin (DM-beta-CD) was investigated. A better separation was obtained for Sal and Bup with the CD mixtures compared to the use of HP-beta-CD or DM-beta-CD alone. The best simultaneous separation of Sal and Bup enantiomers was achieved with a 20 mM HP-beta-CD and 20 mM DM-beta-CD at pH 2.5 in a triethanolamine (TEA)/phosphate buffer. This method-utilized chlorphenamine (Chl) as an internal standard was found to be linear in the range 0.5-100 microg/mL and 0.5-150 microg/mL for Sal and Bup enantiomers, respectively. The limits of detection for both enantiomers of Sal and Bup were 0.18 and 0.24 microg/mL, respectively. The proposed method was applied to monitor Sal and Bup enantiomers concentration change in rat blood samples obtained from a male rat after celiac doses administration 0-30 min of Sal and Bup racemate. The method could also be used to determine Sal enantiomers in a pharmaceutical aerosol.