YidC family members are involved in the membrane insertion, lateral integration, folding, and assembly of membrane proteins

Members of the YidC family exist in all three domains of life, where they control the assembly of a large variety of membrane protein complexes that function as transporters, energy devices, or sensor proteins. Recent studies in bacteria have shown that YidC functions on its own as a membrane protein insertase independent of the Sec protein-conducting channel. YidC can also assist in the lateral integration and folding of membrane proteins that insert into the membrane via the Sec pathway.     

Oxal/Alb3/YidC system for insertion of membrane proteins in mitochondria,chloroplasts and bacteria (Review)

Recent studies have shown that there is a pathway that is evolutionarily conserved for the insertion of proteins into the membrane in mitochondria, chloroplasts, and bacteria. In this pathway, the Oxa1/Alb3/YidC proteins are believed to function as membrane insertases that play an important role in the membrane protein biogenesis of respiratory and energy transduction proteins. Additional roles of the Oxa1/Alb3/YidC members may be in the lateral integration of proteins into the lipid bilayer, and in the folding and assembly of proteins into membrane protein complexes.     

A ribosome–nascent chain sensor of membrane protein biogenesis in Bacillus subtilis

Proteins in the YidC/Oxa1/Alb3 family have essential functions in membrane protein insertion and folding. Bacillus subtilis encodes two YidC homologs, one that is constitutively expressed (spoIIIJ/yidC1) and a second (yqjG/yidC2) that is induced in spoIIIJ mutants. Regulated induction of yidC2 allows B. subtilis to maintain capacity of the membrane protein insertion pathway. We here show that a gene located upstream of yidC2 (mifM/yqzJ) serves as a sensor of SpoIIIJ activity that regulates yidC2 translation. Decreased SpoIIIJ levels or deletion of the MifM transmembrane domain arrests mifM translation and unfolds an mRNA hairpin that otherwise blocks initiation of yidC2 translation. This regulated translational arrest and yidC2 induction require a specific interaction between the MifM C‐terminus and the ribosomal polypeptide exit tunnel. MifM therefore acts as a ribosome–nascent chain complex rather than as a fully synthesized protein. B. subtilis MifM and the previously described secretion monitor SecM in Escherichia coli thereby provide examples of the parallel evolution of two regulatory nascent chains that monitor different protein export pathways by a shared molecular mechanism.     

YidC/Alb3/Oxa1 Family of Insertases

The YidC/Alb3/Oxa1 family functions in the insertion and folding of proteins in the bacterial cytoplasmic membrane, the chloroplast thylakoid membrane, and the mitochondrial inner membrane. All members share a conserved region composed of five transmembrane regions. These proteins mediate membrane insertion of an assorted group of proteins, ranging from respiratory subunits in the mitochondria and light-harvesting chlorophyll-binding proteins in chloroplasts to ATP synthase subunits in bacteria. This review discusses the YidC/Alb3/Oxa1 protein family as well as their function in membrane insertion and two new structures of the bacterial YidC, which suggest a mechanism for membrane insertion by this family of insertases.     

The major outer membrane protein of Fusobacterium nucleatum (FomA) folds and inserts into lipid bilayers via parallel folding pathways

Membrane protein insertion and folding was studied for the major outer membrane protein of Fusobacterium nucleatum (FomA), which is a voltage-dependent general diffusion porin. The transmembrane domain of FomA forms a beta-barrel that is predicted to consist of 14 beta-strands. Here, unfolded FomA is shown to insert and fold spontaneously and quantitatively into phospholipid bilayers upon dilution of the denaturant urea, which was shown previously only for outer membrane protein A (OmpA) of Escherichia coli. Folding of FomA is demonstrated by circular dichroism and fluorescence spectroscopy, by SDS-polyacrylamide gel electrophoresis, and by single-channel recordings. Refolded FomA had a single-channel conductance of 1.1 nS at 1 M KCl, in agreement with the conductance of FomA isolated from membranes in native form. In contrast to OmpA, which forms a smaller eight-stranded beta-barrel domain, folding kinetics of the larger FomA were slower and provided evidence for parallel folding pathways of FomA into lipid bilayers. Two pathways were observed independent of membrane thickness with two different lipid bilayers, which were either composed of dicapryl phosphatidylcholine or dioleoyl phosphatidylcholine. This is the first observation of parallel membrane insertion and folding pathways of a beta-barrel membrane protein from an unfolded state in urea into lipid bilayers. The kinetics of both folding pathways depended on the chain length of the lipid and on temperature with estimated activation energies of 19 kJ/mol (dicapryl phosphatidylcholine) and 70 kJ/mol (dioleoyl phosphatidylcholine) for the faster pathways.     

Translocons, thermodynamics, and the folding of membrane proteins

Recent three-dimensional structures of helical membrane proteins present new challenges for the prediction of structure from amino acid sequence. Membrane proteins reside stably in a thermodynamic free energy minimum after release into the membrane's bilayer fabric from the translocon complex. This means that structure prediction is primarily a problem of physical chemistry. But the folding processes within the translocon must also be considered. A distilled overview of the physical principles of membrane protein stability is presented, and extended to encompass translocon-assisted folding.     

Escherichia coli YidC is a membrane insertase for Sec-independent proteins

YidC is a recently discovered bacterial membrane protein that is related to the mitochondrial Oxa1p and the Alb3 protein of chloroplasts. These proteins are required in the membrane integration process of newly synthesized proteins that do not require the classical Sec machinery. Here we demonstrate that YidC is sufficient for the membrane integration of a Sec-independent protein. Microgram amounts of the purified single-spanning Pf3 coat protein were efficiently inserted into proteoliposomes containing the purified YidC. A mutant Pf3 coat protein with an extended hydrophobic region was inserted independently of YidC into the membrane both in vivo and in vitro, but its insertion was accelerated by YidC. These results show that YidC can function separately from the Sec translocase to integrate membrane proteins into the lipid bilayer.     

信号识别颗粒调控蛋白转运系统

蛋白质是一类重要的生物大分子。在蛋白质转运系统中,很多蛋白质在核糖体中合成,然后通过内质网或质膜的转运到达相应的细胞器发挥生物学功能。蛋白质的分泌表达途径总共分为三类,分别为Sec分泌途径、双精氨酸途径和信号识别颗粒转运系统。本文简要介绍蛋白质的基本转运途径,主要介绍由信号识别颗粒所介导的蛋白质转运。分别概述信号识别颗粒及其受体的组成与功能,并对其调控途径做简要的介绍;同时也简单介绍与其相关的Yid C膜蛋白家族;对信号识别颗粒蛋白调控系统存在的必需性提出新的见解。     

Membrane biogenesis of subunit II of cytochrome bo oxidase: contrasting requirements for insertion of N-terminal and C-terminal domains

The membrane assembly of the respiratory complexes requires the membrane insertases Oxa1 in mitochondria and YidC in bacteria. Oxa1 is responsible for the insertion of the mitochondrial cytochrome c oxidase subunit II (CoxII). Here, we investigated whether YidC, the bacterial Oxa1 homolog, plays a crucial role in the assembly of the bacterial subunit II (CyoA) of cytochrome bo oxidase. CyoA spans the membrane twice and is made with a cleavable signal peptide. We find that translocation of the short N-terminal domain of CyoA is YidC-dependent. In contrast, both the SecA/SecYEG complex and YidC are required for translocation of the large C-terminal domain. By studying the N-terminal domain of CyoA alone, we find that translocation is unaffected when SecE is depleted, suggesting that the YidC insertase on its own catalyzes membrane insertion of the N-terminal region of CyoA. Strikingly, we find that the translocation of the N-terminal domain is a prerequisite for translocation of the C-terminal domain in the full-length CyoA protein because translocation of the large C-terminal domain alone in a truncated CyoA derivative was observed in the absence of YidC. This work shows that the distinct domains of CyoA have different translocation requirements (YidC only and Sec/YidC) and confirms that the membrane biogenesis of subunit II of cytochrome oxidase in bacteria and mitochondria have conserved features.     

Cryo-EM structures reveal multiple stages of bacterial outer membrane protein folding

1. Download : Download high-res image (338KB)
2. Download : Download full-size image

     

Liprotides assist in folding of outer membrane proteins

Proteins and lipids can form complexes called liprotides, in which the partially denatured protein forms a shell encasing a lipid core. This effectively stabilizes a lipid micelle in an aqueous solvent and suggests that liprotides may provide a suitable vessel for membrane proteins. Accordingly we have investigated if liprotides consisting of α‐lactalbumin and oleate could aid folding of four different outer membrane proteins (OMPs) tOmpA, PagP, BamA, and OmpF. tOmpA was able to fold in the presence of the liprotide, and folding did not occur if only oleate or α‐lactalbumin were added. Although the liprotides did not fold the other three OMPs on its own, it was able to assist their folding in the presence of vesicles. Incubation with liprotides before folding into vesicles increased the folding yield of the outer membrane proteins to a level higher than using micelles of the non‐ionic surfactant DDM. Even though the liprotide was stable at both high urea concentrations and high pH, it failed to efficiently fold OmpA at high pH. Instead, optimal folding was seen at pH 8–9, suggesting that important changes in the liprotide occurred when increasing the pH. We conclude that an otherwise folding‐inactive fatty acid can be activated when presented by a liprotide and thereby work as an in vitro chaperone for outer membrane proteins.     

Effect of crowding by Ficolls on OmpA and OmpT refolding and membrane insertion

Folding of outer membrane proteins (OMPs) has been studied extensively in vitro. However, most of these studies have been conducted in dilute buffer solution, which is different from the crowded environment in the cell periplasm, where the folding and membrane insertion of OMPs actually occur. Using OmpA and OmpT as model proteins and Ficoll 70 as the crowding agent, here we investigated the effect of the macromolecular crowding condition on OMP membrane insertion. We found that the presence of Ficoll 70 significantly slowed down the rate of membrane insertion of OmpA while had little effect on those of OmpT. To investigate if the soluble domain of OmpA slowed down membrane insertion in the presence of the crowding agent, we created a truncated OmpA construct that contains only the transmembrane domain (OmpA171). In the absence of crowding agent, OmpA171 refolded at a similar rate as OmpA, although with decreased efficiency. However, under the crowding condition, OmpA171 refolded significantly faster than OmpA. Our results suggest that the periplasmic domain slows down the rate, while improves the efficiency, of OmpA folding and membrane insertion under the crowding condition. Such an effect was not obvious when refolding was studied in buffer solution in the absence of crowding.     

Mba1, a novel component of the mitochondrial protein export machinery of the yeast Saccharomyces cerevisiae

The biogenesis of mitochondria requires the integration of many proteins into the inner membrane from the matrix side. The inner membrane protein Oxa1 plays an important role in this process. We identified Mba1 as a second mitochondrial component that is required for efficient protein insertion. Like Oxa1, Mba1 specifically interacts both with mitochondrial translation products and with conservatively sorted, nuclear-encoded proteins during their integration into the inner membrane. Oxa1 and Mba1 overlap in function and substrate specificity, but both can act independently of each other. We conclude that Mba1 is part of the mitochondrial protein export machinery and represents the first component of a novel Oxa1-independent insertion pathway into the mitochondrial inner membrane.     

Rapid exploration of the folding topology of helical membrane proteins using paramagnetic perturbation

An understanding of the folding states of α-helical membrane proteins in detergent systems is important for functional and structural studies of these proteins. Here, we present a rapid and simple method for identification of the folding topology and assembly of transmembrane helices using paramagnetic perturbation in nuclear magnetic resonance spectroscopy. By monitoring the perturbation of signals from glycine residues located at specific sites, the folding topology and the assembly of transmembrane helices of membrane proteins were easily identified without time-consuming backbone assignment. This method is validated with Mistic (membrane-integrating sequence for translation of integral membrane protein constructs) of known structure as a reference protein. The folding topologies of two bacterial histidine kinase membrane proteins (SCO3062 and YbdK) were investigated by this method in dodecyl phosphocholine (DPC) micelles. Combing with analytical ultracentrifugation, we identified that the transmembrane domain of YbdK is present as a parallel dimer in DPC micelle. In contrast, the interaction of transmembrane domain of SCO3062 is not maintained in DPC micelle due to disruption of native structure of the periplasmic domain by DPC micelle.     

Retinal proteins as model systems for membrane protein folding

Experimental folding studies of membrane proteins are more challenging than water-soluble proteins because of the higher hydrophobicity content of membrane embedded sequences and the need to provide a hydrophobic milieu for the transmembrane regions. The first challenge is their denaturation: due to the thermodynamic instability of polar groups in the membrane, secondary structures in membrane proteins are more difficult to disrupt than in soluble proteins. The second challenge is to refold from the denatured states. Successful refolding of membrane proteins has almost always been from very subtly denatured states. Therefore, it can be useful to analyze membrane protein folding using computational methods, and we will provide results obtained with simulated unfolding of membrane protein structures using the Floppy Inclusions and Rigid Substructure Topography (FIRST) method. Computational methods have the advantage that they allow a direct comparison between diverse membrane proteins. We will review here both, experimental and FIRST studies of the retinal binding proteins bacteriorhodopsin and mammalian rhodopsin, and discuss the extension of the findings to deriving hypotheses on the mechanisms of folding of membrane proteins in general. This article is part of a Special Issue entitled: Retinal Proteins—You can teach an old dog new tricks.     

Insertion kinetics of a denatured alpha helical membrane protein into phospholipid bilayer vesicles

Membrane protein folding has suffered from a lack of detailed kinetic studies, particularly with regard to the insertion of denatured protein into lipid bilayers. We present a detailed in vitro kinetic study of the association of a denatured, transmembrane alpha helical protein with lipid vesicles. The mechanism of folding of Escherichia coli diacylglycerol kinase from a partially denatured state in urea has been investigated. The protein associates with lipid vesicles to give a protein, vesicle complex with an apparent association constant of 2 x 10(6) M(-1) s(-1). This association rate approaches the diffusion limit of the protein, vesicle reaction. The association of the protein with lipid vesicles is followed by a slower process occurring at observed rate of 0.031 s(-1), involving insertion into the bilayer and generation of a functional oligomer of diacylglycerol kinase. Protein aggregation competes with vesicle insertion. The urea-denatured protein monomers begin to aggregate as soon as the urea is diluted. This aggregation is faster than the association of the protein with vesicles so that most protein aggregates before it inserts into a vesicle. Increasing the vesicle concentration favours insertion of protein monomers, but at high vesicle concentrations monomers are primarily in separate vesicles and do not associate to form functional oligomers. Irreversible aggregation limits the yield of functional protein, while the data also suggest that lipid vesicles can reverse another aggregation reaction, leading to the recovery of correctly folded protein.     

Marginally hydrophobic transmembrane α‐helices shaping membrane protein folding

Cells have developed an incredible machinery to facilitate the insertion of membrane proteins into the membrane. While we have a fairly good understanding of the mechanism and determinants of membrane integration, more data is needed to understand the insertion of membrane proteins with more complex insertion and folding pathways. This review will focus on marginally hydrophobic transmembrane helices and their influence on membrane protein folding. These weakly hydrophobic transmembrane segments are by themselves not recognized by the translocon and therefore rely on local sequence context for membrane integration. How can such segments reside within the membrane? We will discuss this in the light of features found in the protein itself as well as the environment it resides in. Several characteristics in proteins have been described to influence the insertion of marginally hydrophobic helices. Additionally, the influence of biological membranes is significant. To begin with, the actual cost for having polar groups within the membrane may not be as high as expected; the presence of proteins in the membrane as well as characteristics of some amino acids may enable a transmembrane helix to harbor a charged residue. The lipid environment has also been shown to directly influence the topology as well as membrane boundaries of transmembrane helices—implying a dynamic relationship between membrane proteins and their environment.     

Alb4 of Arabidopsis Promotes Assembly and Stabilization of a Non Chlorophyll-Binding Photosynthetic Complex,the CF1CF0-ATP Synthase

All members of the YidC/Oxal/Alb3 protein family are evolutionarily conserved and appear to function in membrane protein integration and protein complex stabilization. Here, we report on a second thylakoidal isoform of Alb3, named Alb4. Analysis of Arabidopsis knockout mutant lines shows that AIb4 is required in assembly and/or stability of the CF1CF0-ATP synthase （ATPase）. alb4 mutant lines not only have reduced steady-state levels of ATPase subunits, but also their assembly into high-molecular-mass complexes is altered, leading to a reduction of ATP synthesis in the mutants. Moreover, we show that Alb4 but not AIb3 physically interacts with the subunits CF1β and CF0ll. Summarizing, the data indicate that AIb4 functions to stabilize or promote assembly of CF1 during its attachment to the membrane-embedded CF0 part.