The Wettability and Mechanism of Geometric Non-Smooth Structure of Dragonfly Wing Surface

Scanning electron microscope and optical contact angle measuring instruments were used to investigate the microstructure and wettability of geometric non-smooth structure of dragonfly wing surface. Results show that the geometric non-smooth structure of dragonfly wing surface is one part of epicuticle, some organic solvents can effectively dissolve the main ingredient of non-smooth structure. The hydrophobicity of dragonfly wing surface is induced by the co-coupling of the non-smooth structure and the waxy layer covering.     

Role of Soft Matter in the Sandwich Vein of Dragonfly Wing in Its Configuration and Aerodynamic Behaviors

The microstructure of the main longitudinal veins of the dragonfly wing and the aerodynamic behaviors of the wing were investigated in this paper.The microstructure of longitudinal vein presents two circumferential chitin layers and a protein-fiber soft layer.The dragonfly wing is corrugated due to the spatial arrangement of longitudinal veins.It was found that the corrugation angle could significantly influence the lift/drag ratio across a range of attack angles by the wind tunnel experiments.The results of the finite element analysis indicate that the protein soft layer of vein facilitates the change of the corrugation angle by allowing substantial relative twisting deformation between two neighboring veins,which is not possible in veins without a soft sandwich layer.     

Molecular Organization of the Nanoscale Surface Structures of the Dragonfly Hemianax papuensis Wing Epicuticle

The molecular organization of the epicuticle (the outermost layer) of insect wings is vital in the formation of the nanoscale surface patterns that are responsible for bestowing remarkable functional properties. Using a combination of spectroscopic and chromatographic techniques, including Synchrotron-sourced Fourier-transform infrared microspectroscopy (FTIR), x-ray photoelectron spectroscopy (XPS) depth profiling and gas chromatography-mass spectrometry (GCMS), we have identified the chemical components that constitute the nanoscale structures on the surface of the wings of the dragonfly, Hemianax papuensis. The major components were identified to be fatty acids, predominantly hexadecanoic acid and octadecanoic acid, and n-alkanes with even numbered carbon chains ranging from C₁₄ to C₃₀. The data obtained from XPS depth profiling, in conjunction with that obtained from GCMS analyses, enabled the location of particular classes of compounds to different regions within the epicuticle. Hexadecanoic acid was found to be a major component of the outer region of the epicuticle, which forms the surface nanostructures, and was also detected in deeper layers along with octadecanoic acid. Aliphatic compounds were detected throughout the epicuticle, and these appeared to form a third discrete layer that was separate from both the inner and outer epicuticles, which has never previously been reported.     

动力加压髋螺钉对股骨上段生物力学特征性的影响

目的：探讨股骨上端骨折,以动力加压髋螺钉进行骨固定治疗,骨折愈合后,取出动力加压髋螺钉以后的股骨上段与完整的股骨上段的生物力学特性相比较,为临床内固定取出术后功能锻炼的强度提供量化依据。方法：收集8具新鲜尸体股骨标本进行实验应力分析,分别测定完整股骨上段和动力加压髋螺钉取出后股骨上段的力学特性改变。结果：动力加压髋螺钉取出术后股骨上段的力学特性与完整股骨上段的力学特性相比有显著的差异（P＜0．01）。结论：股骨上端骨折如果以动力加压髋螺钉为治疗手段,在骨折愈合取出内固定后,功能锻炼只能控制在慢速步行水平,不能进行奔跑、跳跃等活动,以防止再骨折等并发症的发生。     

Dynamic simulation of tibial tuberosity realignment: model evaluation

This study was performed to evaluate a dynamic multibody model developed to characterize the influence of tibial tuberosity realignment procedures on patellofemoral motion and loading. Computational models were created to represent four knees previously tested at 40°, 60°, and 80° of flexion with the tibial tuberosity in a lateral, medial and anteromedial positions. The experimentally loaded muscles, major ligaments of the knee, and patellar tendon were represented. A repeated measures ANOVA with post-hoc testing was performed at each flexion angle to compare data between the three positions of the tibial tuberosity. Significant experimental trends for decreased patella flexion due to tuberosity anteriorization and a decrease in the lateral contact force due to tuberosity medialization were reproduced computationally. The dynamic multibody modeling technique will allow simulation of function for symptomatic knees to identify optimal surgical treatment methods based on parameters related to knee pathology and pre-operative kinematics.     

The effect of calcification on the structural mechanics of the costal cartilage

The costal cartilage often undergoes progressive calcification with age. This study sought to investigate the effects of calcification on the structural mechanics of whole costal cartilage segments. Models were developed for five costal cartilage specimens, including representations of the cartilage, the perichondrium, calcification, and segments of the rib and sternum. The material properties of the cartilage were determined through indentation testing; the properties of the perichondrium were determined through optimisation against structural experiments. The calcified regions were then expanded or shrunk to develop five different sensitivity analysis models for each. Increasing the relative volume of calcification from 0% to 24% of the cartilage volume increased the stiffness of the costal cartilage segments by a factor of 2.3–3.8. These results suggest that calcification may have a substantial effect on the stiffness of the costal cartilage which should be considered when modelling the chest, especially if age is a factor.     

Dynamic Interpretation of Hedgehog Signaling in the Drosophila Wing Disc

Morphogens are classically defined as molecules that control patterning by acting at a distance to regulate gene expression in a concentration-dependent manner. In the Drosophila wing imaginal disc, secreted Hedgehog (Hh) forms an extracellular gradient that organizes patterning along the anterior–posterior axis and specifies at least three different domains of gene expression. Although the prevailing view is that Hh functions in the Drosophila wing disc as a classical morphogen, a direct correspondence between the borders of these patterns and Hh concentration thresholds has not been demonstrated. Here, we provide evidence that the interpretation of Hh signaling depends on the history of exposure to Hh and propose that a single concentration threshold is sufficient to support multiple outputs. Using mathematical modeling, we predict that at steady state, only two domains can be defined in response to Hh, suggesting that the boundaries of two or more gene expression patterns cannot be specified by a static Hh gradient. Computer simulations suggest that a spatial “overshoot” of the Hh gradient occurs, i.e., a transient state in which the Hh profile is expanded compared to the Hh steady-state gradient. Through a temporal examination of Hh target gene expression, we observe that the patterns initially expand anteriorly and then refine, providing in vivo evidence for the overshoot. The Hh gene network architecture suggests this overshoot results from the Hh-dependent up-regulation of the receptor, Patched (Ptc). In fact, when the network structure was altered such that the ptc gene is no longer up-regulated in response to Hh-signaling activation, we found that the patterns of gene expression, which have distinct borders in wild-type discs, now overlap. Our results support a model in which Hh gradient dynamics, resulting from Ptc up-regulation, play an instructional role in the establishment of patterns of gene expression.     

Effects of Methanol on Wettability of the Non-Smooth Surface on Butterfly Wing

The contact angles of distilled water and methanol solution on the wings of butterflies were determined by a visual contact angle measuring system. The scale structures of the wings were observed using scanning electron microscopy, The influence of the scale micro- and ultra-structure on the wettability was investigated. Results show that the contact angle of distilled water on the wing surfaces varies from 134.0° to 159.2°. High hydrophobicity is found in six species with contact angles greater than 150°. The wing surfaces of some species are not only hydrophobic but also resist the wetting by methanol solution with 55% concentration. Only two species in Parnassius can not resist the wetting because the micro-structure （spindle-like shape） and ultra-structure （pinnule-like shape） of the wing scales are remarkably different from that of other species. The concentration of methanol solution for the occurrence of spreading/wetting on the wing surfaces of different species varies from 70% to 95%. After wetting by methanol solution for 10 min, the distilled water contact angle on the wing surface increases by 0.8°-2.1°, showing the promotion of capacity against wetting by distilled water.     

Temperature Effect on the Development of Tropical Dragonfly Eggs

Physiological constraints in insects are related to several large-scale processes such as species distribution and thermal adaptation. Here, we fill an important gap in ecophysiology knowledge by accessing the relationship between temperature and embrionary development time in four dragonfly species. We evaluated two questions (1) what is the effect of temperature on the development time of Odonata eggs, and (2) considering a degree-day relationship, could a simple linear model describe the dependence of embrionary development time on temperature or it is better described by a more complex non-linear relation. Egg development time of Erythrodiplax fusca (Rambur), Micrathyria hesperis Ris, Perithemis mooma Kirby, and Miathyria simplex (Rambur) (Odonata: Libellulidae) were evaluated. We put the eggs at different temperatures (15, 20, 25, and 30°C) and counted the number of hatched larvae daily. A nonlinear response of the development to the temperature was found, differing from the expected pattern for standard degree-day analysis. Furthermore, we observed that there is a similar process in the development time and hatching synchronization between species, with all species presenting faster egg development at high temperatures. Species-specific differences are more evident at lower temperatures (15°C), with no egg development in M. simplex. Only E. fusca was relatively insensitive to temperature changes with similar hatching rates in all treatments.     

Fluid and Sediment Dynamic Effects on Marine Benthic Community Structure

Fluid and sediment dynamics affect benthic community dynamicsand structure in manifold ways. We single out three community-structuringprocesses that are both strongly affected and amenable to controlledmanipulation: microbial population growth, faunal recruitment,and particle feeding. Attachment and colony growth rates ofmicrobes depend on the details of near-bed fluid exchange. Theiremigration and colony growth rates are affected by erosion ofmicrobial filmsand by abrasion during sediment transport. Recruitment and successional patterns of metazoans, especiallythose resulting from the settlement of weakly swimming, smalllarvae and juveniles, also are very sensitive to local variationsin boundary layer flow pattern and strength. While the importanceof particle fluxes to suspension feeders has long been apparent,the foraging patterns of a growing number of surface depositfeeders are being found to reflect a dependence upon sedimenttransport. Although these three processes have spatial and temporalscales amenable to both laboratory and field experimentation,proper dynamic scaling of laboratory model flows may not alwaysbe easy. Even the simplest two-phase (particles plus liquids,where particles can be bacteria, floes, larvae, or sediments)flows must match appropriate laboratory and field Reynolds number,Froude number, particle-fluid density (weight per unit volume)ratio, and the ratio of boundary layer thickness to particlesize, if the laboratory flow model is to provide accurate results.     

生物造粒流化床微生物落结构及其动态变化

为了研究生物造粒流化床污水处理反应器颗粒污泥中微生物群落结构及其动态变化,分别从生物造粒流化床10、60、110cm处取颗粒污泥,通过细胞裂解直接提取颗粒污泥细菌基因组DNA。以细菌和古细菌16S rRNA基因通用引物530F/1490R,对活性污泥中提取的细菌基因组DNA进行PCR扩增,长约1kb的PCR扩增产物纯化后经变性梯度凝胶电泳(DGGE)分离,获得微生物群落的DNA特征指纹图谱。结果显示,生物造粒流化床反应器颗粒污泥中的微生物群落非常丰富,在10cm处微生物的种属达到23种,60cm处为21种,110cm处为20种;生物造粒流化床不同高度都有一些各自的特有种属和共有种属,反应器不同高度的微生物群落演替不明显,微生物群落相似性为83.1%,群落结构较为稳定。     

Effects of lipids on elastin's viscoelastic properties

Sodium dodecyl sulfate (SDS) was used as a model lipid to identify the molecular basis of possible lipid-induced changes in the viscoelastic behavior of arterial elastin. The chemical composition of the elastin network and the interfibrillar space was calculated from the chemical content of the elastin sample and its swelling behavior. Viscoelastic behavior was measured in aqueous SDS and in SDS plus 1 M sucrose, a deswelling agent. Viscoelastic behavior was also measured in sucrose and potassium thiocyanate solutions to identify the effects of swelling and of changes in network composition exclusive of any direct SDS effects. The hydration of the elastin network decreased at low SDS levels and increased at higher SDS levels. The elastin was stiffer in the dehydrated network and less stiff in the hydrated network. However, once the degree of hydration exceeded that of elastin in pure water, no further decrease in stiffness was obtained despite continued increase in swelling. The stiffness of the network could be accounted for entirely by changes in network hydration. There was no evidence that SDS had any effect on elastin's conformation. We predict that arterial lipids will interact with elastin in a similar way and will have only small effects on elastin's viscoelastic behavior.     

Effects of Rht-dosage on the breaking strength of wheat seedling leaves

We report the effect of the reduced-height alleles Rht1 and Rht2 on the breaking strength and breaking stress of the first foliage leaves of wheat seedlings. Transverse size variables such as blade transverse area and blade width were positively related to the breaking strength and breaking stress of leaves, as was the total wall area of the principal fiber strands. A negative correlation was found for the Rht-dosage with respect to the breaking strength. Because Rht plants had greater transverse dimensions and equal amounts of principal fiber strands compared to wild type, we posit that Rht may affect the mechanical quality of leaf tissues per se. Rht may serve as an example of a simple genetic system that profoundly affects plant morphology, development, and biomechanics.     

Effects of Ultrasonic Seed Treatment on Rice Performances under the Seawater Irrigation

Irrigation with desalinated seawater is an effective way to use ocean resources and save freshwater resources. However, seawater irrigation would cause yield loss of rice. In order to explore the effects of ultrasonic seed treatment on rice performances under seawater irrigation, the present study was conducted with three irrigation treatments (fresh water (SW0), ten times diluted seawater (SW1%, 0.34% salinity), and five times diluted seawater (SW2%, 0.68% salinity)) and two seed treatments (ultrasonic treated seeds (UT) and untreated seeds (CK)). Compared with SW0 + CK treatment, SW1 + CK and SW2 + CK treatments significantly decreased grain yield by 56.19% and 66.69%, spikelets per panicle by 30.11% and 55.80%, seed-setting rate by 23.05% and 18.87%, and 1000-grain weight by 4.55% and 14.50%, respectively. Seawater irrigation also significantly increased malonaldehyde (MDA) and proline contents and the activities of superoxide dismutase (SOD) and peroxidase (POD). Ultrasonic seed treatment significantly increased the grain number per panicle, seed-setting rate, and grain yield of rice under seawater irrigation. Compared with CK, UT treatment substantially reduced MDA content, SOD activity, and POD activity in SW1 and SW2 conditions. Furthermore, UT treatment significantly increased proline content and down-regulated proline dehydrogenase activity under seawater irrigation. We deduced that ultrasonic seed treatment enhanced the salinity tolerance of rice by inducing the proline accmulation. Our findings indicated that ultrasonic seed treatment could an effective strategy to promote rice productivity under seawater irrigation.     

Multiscale modeling of cellular actin filaments: from atomistic molecular to coarse-grained dynamics

In this article, we present a computational multiscale model for the characterization of subcellular proteins. The model is encoded inside a simulation tool that builds coarse-grained (CG) force fields from atomistic simulations. Equilibrium molecular dynamics simulations on an all-atom model of the actin filament are performed. Then, using the statistical distribution of the distances between pairs of selected groups of atoms at the output of the MD simulations, the force field is parameterized using the Boltzmann inversion approach. This CG force field is further used to characterize the dynamics of the protein via Brownian dynamics simulations. This combination of methods into a single computational tool flow enables the simulation of actin filaments with length up to 400 nm, extending the time and length scales compared to state-of-the-art approaches. Moreover, the proposed multiscale modeling approach allows to investigate the relationship between atomistic structure and changes on the overall dynamics and mechanics of the filament and can be easily (i) extended to the characterization of other subcellular structures and (ii) used to investigate the cellular effects of molecular alterations due to pathological conditions.