Dynamics of nucleotide incorporation: snapshots revealed by 2-aminopurine fluorescence studies

Formation of a noncanonical base pair between dFTP, a dTTP analogue that cannot form H bonds, and the fluorescent base analogue 2-aminopurine (2AP) was studied in order to discover how the bacteriophage T4 DNA polymerase selects nucleotides with high accuracy. Changes in 2AP fluorescence intensity provided a spectroscopic reporter of the nucleotide binding reactions, which were combined with rapid-quench, pre-steady-state reactions to measure product formation. These studies supported and extended previous findings that the T4 DNA polymerase binds nucleotides in multiple steps with increasing selectivity. With 2AP in the template position, initial dTTP binding was rapid but selective: K(d(dTTP)) (first step) = 31 microM; K(d(dCTP)) (first step) approximately 3 mM. In studies with dFTP, this step was revealed to have two components: formation of an initial preinsertion complex in which H bonds between bases in the newly forming base pair were not essential, which was followed by formation of a final preinsertion complex in which H bonds assisted. The second nucleotide binding step was characterized by increased discrimination against dTTP binding opposite template 2AP, K(d) (second step) = 367 microM, and additional conformational changes were detected in ternary enzyme-DNA-dTTP complexes, as expected for forming closed complexes. We demonstrate here that the second binding step occurs before formation of the phosphodiester bond. Thus, the high fidelity of nucleotide insertion by T4 DNA polymerase is accomplished by the sequential application of selectivity in first forming accurate preinsertion complexes, and then additional conformational changes are applied that further increase discrimination against incorrect nucleotides.     

Kinetic analysis of base substitution mutagenesis by transient misalignment of DNA and by miscoding

We measured the insertion fidelity of DNA polymerases alpha and beta and yeast DNA polymerase I at a template site that was previously observed to yield a high frequency of T----G transversions when copied by DNA polymerase beta but not by the other two polymerases. The results provide direct biochemical evidence that base substitution errors by DNA polymerase beta can result from a dislocation mechanism governed by DNA template-primer misalignment. In contrast to DNA polymerase beta, neither Drosophila DNA polymerase alpha nor yeast DNA polymerase I appear to misinsert nucleotides by a dislocation mechanism in either the genetic or kinetic fidelity assays. Dislocation errors by DNA polymerase beta are characterized primarily by a substantial reduction in the apparent Km for inserting a "correct," but ultimately errant, nucleotide compared to the apparent Km governing direct misinsertion. For synthesis by DNA polymerase beta, dislocation results in a 35-fold increase in dCMP incorporation opposite template T (T----G transversion) and a 20-35-fold increase in dTMP incorporation opposite T (T----A transversion); these results are consistent with parallel genetic fidelity measurements. DNA polymerase beta also produces base substitution errors by direct misinsertion. Here nucleotide insertion fidelity results from substantial differences in both Km and Vmax for correct versus incorrect substrates and is influenced strongly by local base sequence.     

Pre-steady-state kinetic characterization of the DinB homologue DNA polymerase of Sulfolobus solfataricus

Equilibrium as well as pre-steady-state measurements were performed to characterize the molecular basis of DNA binding and nucleotide incorporation by the thermostable archaeal DinB homologue (Dbh) DNA polymerase of Sulfolobus solfataricus. Equilibrium titrations show a DNA binding affinity of about 60 nm, which is approximately 10-fold lower compared with other DNA polymerases. Investigations of the binding kinetics applying stopped-flow and pressure jump techniques confirm this weak binding affinity. Furthermore, these measurements suggest that the DNA binding occurs in a single step, diffusion-controlled manner. Single-turnover, single dNTP incorporation studies reveal maximal pre-steady-state burst rates of 0.64, 2.5, 3.7, and 5.6 s(-1) for dTTP, dATP, dGTP, and dCTP (at 25 degrees C), which is 10-100-fold slower than the corresponding rates of classical DNA polymerases. Another unique feature of the Dbh is the very low nucleotide binding affinity (K(d) approximately 600 mum), which again is 10-20-fold lower compared with classical DNA polymerases as well as other Y-family polymerases. Surprisingly, the rate-limiting step of nucleotide incorporation (correct and incorrect) is the chemical step (phosphoryl transfer) and not a conformational change of the enzyme. Thus, unlike replicative polymerases, an "induced fit" mechanism to select and incorporate nucleotides during DNA polymerization could not be detected for Dbh.     

Avian myeloblastosis virus DNA polymerase. Kinetic studies on the incorporation of noncomplementary nucleotides.

The high error rate characteristic of DNA polymerases from RNA tumor viruses has permitted measurements on the simultaneous incorporation of complementary and noncomplementary nucleotides during DNA synthesis. For example, avian myeloblastosis virus DNA polymerase incorporates 1 molecule of dCMP for approximately 500 molecules of dTMP polymerized using polyriboadenylic acid as a template. The parallel incorporation of complementary and noncomplementary nucleotides afer gel filtration of avian myeloblastosis virus DNA polymerase indicates that the observed fidelity is catalyzed by the polymerase itself. Nearest neighbor analysis of the product indicates that noncomplementary nucleotides are incorporated as single base substitutions. The incorporation of the noncomplementary dCMP is not reduced by a 20-fold greater amount of the complementary nucleotide, dTTP. Conversely, the concentration of the noncomplementary nucleotides does not effect the rate of incorporation of the complementary nucleotide. A similar lack of competition between complementary dGTP and noncomplementary dATP is exhibited using poly(rC)-oligo(dG) as a template-primer. Furthermore, there was no detectable competition between the different noncomplementary nucleotides. Possible explanations for this lack of competition are considered.     

Human DNA polymerase iota utilizes different nucleotide incorporation mechanisms dependent upon the template base

Human DNA polymerase ι (Polι) is a member of the Y family of DNA polymerases involved in translesion DNA synthesis. Polι is highly unusual in that it possesses a high fidelity on template A, but has an unprecedented low fidelity on template T, preferring to misincorporate a G instead of an A. To understand the mechanisms of nucleotide incorporation opposite different template bases by Polι, we have carried out pre-steady-state kinetic analyses of nucleotide incorporation opposite templates A and T. These analyses have revealed that opposite template A, the correct nucleotide is preferred because it is bound tighter and is incorporated faster than the incorrect nucleotides. Opposite template T, however, the correct and incorrect nucleotides are incorporated at very similar rates, and interestingly, the greater efficiency of G misincorporation relative to A incorporation opposite T arises predominantly from the tighter binding of G. Based on these results, we propose that the incipient base pair is accommodated differently in the active site of Polι dependent upon the template base and that when T is the templating base, Polι accommodates the wobble base pair better than the Watson-Crick base pair.     

The Gly-952 residue of Saccharomyces cerevisiae DNA polymerase alpha is important in discriminating correct deoxyribonucleotides from incorrect ones

Gly-952 is a conserved residue in Saccharomyces cerevisiae DNA polymerase alpha (pol alpha) that is strictly required for catalytic activity and for genetic complementation of a pol alpha-deficient yeast strain. This study analyzes the role of Gly-952 by characterizing the biochemical properties of Gly-952 mutants. Analysis of the nucleotide incorporation specificity of pol alpha G952A showed that this mutant incorporates nucleotides with extraordinarily low fidelity. In a steady-state kinetic assay to measure nucleotide misincorporation, pol alpha G952A incorporated incorrect nucleotides more efficiently than correct nucleotides opposite template C, G, and T. The fidelity of the G952A mutant polymerase was highest at template A, where the ratio of incorporation of dCMP to dTMP was as high as 0.37. Correct nucleotide insertion was 500- to 3500-fold lower for G952A than for wild type pol alpha, with up to 22-fold increase in pyrimidine misincorporation. The Km for G952A pol alpha bound to mismatched termini T:T, T:C, C:A, and A:C was 71- to 460-fold lower than to a matched terminus. Furthermore, pol alpha G952A preferentially incorporated pyrimidine instead of dAMP opposite an abasic site, cis-syn cyclobutane di-thymine, or (6-4) di-thymine photoproduct. These data demonstrate that Gly-952 is a critical residue for catalytic efficiency and error prevention in S. cerevisiae pol alpha.     

Mechanism of efficient and accurate nucleotide incorporation opposite 7,8-dihydro-8-oxoguanine by Saccharomyces cerevisiae DNA polymerase eta

Most DNA polymerases incorporate nucleotides opposite template 7,8-dihydro-8-oxoguanine (8-oxoG) lesions with reduced efficiency and accuracy. DNA polymerase (Pol) eta, which catalyzes the error-free replication of template thymine-thymine (TT) dimers, has the unique ability to accurately and efficiently incorporate nucleotides opposite 8-oxoG templates. Here we have used pre-steady-state kinetics to examine the mechanisms of correct and incorrect nucleotide incorporation opposite G and 8-oxoG by Saccharomyces cerevisiae Pol eta. We found that Pol eta binds the incoming correct dCTP opposite both G and 8-oxoG with similar affinities, and it incorporates the correct nucleotide bound opposite both G and 8-oxoG with similar rates. While Pol eta incorporates an incorrect A opposite 8-oxoG with lower efficiency than it incorporates a correct C, it does incorporate A more efficiently opposite 8-oxoG than opposite G. This is mainly due to greater binding affinity for the incorrect incoming dATP opposite 8-oxoG. Overall, these results show that Pol eta replicates through 8-oxoG without any barriers introduced by the presence of the lesion.     

Using 2-aminopurine fluorescence to detect bacteriophage T4 DNA polymerase-DNA complexes that are important for primer extension and proofreading reactions

The fluorescence of the base analogue 2-aminopurine (2AP) was used to probe bacteriophage T4 DNA polymerase-induced conformational changes in the template strand produced during the nucleotide incorporation and proofreading reactions. 2AP fluorescence in DNA is quenched by 2AP interactions with neighboring bases, but T4 DNA polymerase binding to DNA substrates labeled with 2AP in the templating position produces large increases in fluorescence intensity. Fluorescence lifetime studies were performed to characterize the fluorescent complexes. Three fluorescence lifetime components were observed for unbound DNA substrates as reported previously, but T4 DNA polymerase binding modulated the amplitudes of these components and created a new, highly fluorescent 10.5 ns component. Experimental evidence for correlation of fluorescence lifetimes with functionally distinct complexes was obtained by forming complexes under different reaction conditions. T4 DNA polymerase complexes were formed with DNA substrates with matched and mismatched primer ends and with A+T- or G+C-rich primer-terminal regions. dTTP was added to binary complexes to form ternary DNA polymerase-DNA-nucleotide complexes. The effect of temperature on complex formation was studied, and complexes were formed with proofreading-defective T4 DNA polymerases. Complexes characterized by the 10.5 ns lifetime were demonstrated to be formed at the crossroads of the primer-extension and proofreading pathways.     

DNA Polymerase �� Substrate Specificity: SIDE CHAIN MODULATION OF THE ��A-RULE��*

Apurinic/apyrimidinic (AP) sites are continuously generated in genomic DNA. Left unrepaired, AP sites represent noninstructional premutagenic lesions that are impediments to DNA synthesis. When DNA polymerases encounter an AP site, they generally insert dAMP. This preferential insertion is referred to as the A-rule. Crystallographic structures of DNA polymerase (pol) β, a family X polymerase, with active site mismatched nascent base pairs indicate that the templating (i.e. coding) base is repositioned outside of the template binding pocket thereby diminishing interactions with the incorrect incoming nucleotide. This effectively produces an abasic site because the template pocket is devoid of an instructional base. However, the template pocket is not empty; an arginine residue (Arg-283) occupies the space vacated by the templating nucleotide. In this study, we analyze the kinetics of pol β insertion opposite an AP site and show that the preferential incorporation of dAMP is lost with the R283A mutant. The crystallographic structures of pol β bound to gapped DNA with an AP site analog (tertrahydrofuran) in the gap (binary complex) and with an incoming nonhydrolyzable dATP analog (ternary complex) were solved. These structures reveal that binding of the dATP analog induces a closed polymerase conformation, an unstable primer terminus, and an upstream shift of the templating residue even in the absence of a template base. Thus, dATP insertion opposite an abasic site and dATP misinsertions have common features.     

Misincorporation of dAMP opposite 2-hydroxyadenine, an oxidative form of adenine.

Nucleotide incorporation opposite an oxidative form of adenine, 2-hydroxyadenine (2-OH-Ade) was investigated. When a primed template with 2-OH-Ade was treated with an exonuclease-deficient Klenow fragment of Escherichia coli DNA polymerase I (KFexo-), recombinant rat DNA polymerase beta (pol beta) or calf thymus DNA polymerase alpha (pol alpha), incorporation of dTMP and dAMP was observed. In addition, KFexo- inserted dGMP as well. A steady-state kinetic study indicated that the insertion of dAMP and dTMP opposite the DNA lesion occurred with similar frequency with KFexo- and pol beta. Insertion of dTMP opposite 2-OH-Ade was favored to that of dAMP by pol alpha. Chain extension from the A.2-OH-Ade pair is less favored than that from the T.2-OH-Ade pair by all three DNA polymerase. Analysis of full-length products of in vitro DNA synthesis showed that dTMP and dAMP were incorporated by DNA polymerases and that exonuclease-proficient and -deficient Klenow fragments also inserted dGMP opposite 2-OH-Ade. These results suggest that formation of 2-OH-Ade from A in DNA will induce A-->T and A-->C transversions in cells.     

Yeast Rev1 protein is a G template-specific DNA polymerase

Rev1 protein of Saccharomyces cerevisiae functions with DNA polymerase zeta in mutagenic trans-lesion synthesis. Because of the reported preferential incorporation of a C residue opposite an abasic site, Rev1 has been referred to as a deoxycytidyltransferase. Here, we use steady-state kinetics to examine nucleotide incorporation by Rev1 opposite undamaged and damaged template residues. We show that Rev1 specifically inserts a C residue opposite template G, and it is approximately 25-, 40-, and 400-fold less efficient at inserting a C residue opposite an abasic site, an O(6)-methylguanine, and an 8-oxoguanine lesion, respectively. Rev1 misincorporates G, A, and T residues opposite template G with a frequency of approximately 10(-3) to 10(-4). Consistent with this finding, Rev1 replicates DNA containing a string of Gs in a template-specific manner, but it has a low processivity incorporating 1.6 nucleotides per DNA binding event on the average. From these observations, we infer that Rev1 is a G template-specific DNA polymerase.     

Pre-steady-state kinetic studies of the fidelity of Sulfolobus solfataricus P2 DNA polymerase IV

Sulfolobus solfataricus P2 DNA polymerase IV (Dpo4) is a thermostable archaeal enzyme and a member of the error-prone and lesion-bypass Y-family. In this paper, for the first time, the fidelity of a Y-family polymerase, Dpo4, was determined using pre-steady-state kinetic analysis of the incorporation of a single nucleotide into an undamaged DNA substrate 21/41-mer at 37 degrees C. We assessed single-turnover (with Dpo4 in molar excess over DNA) saturation kinetics for all 16 possible nucleotide incorporations. The fidelity of Dpo4 was estimated to be in the range of 10(-3)-10(-4). Interestingly, the ground-state binding affinity of correct nucleotides (70-230 microM) is 10-50-fold weaker than those of replicative DNA polymerases. Such a low affinity is consistent with the lack of interactions between Dpo4 and the bound nucleotides as revealed in the crystal structure of Dpo4, DNA, and a matched nucleotide. The affinity of incorrect nucleotides for Dpo4 is approximately 2-10-fold weaker than that of correct nucleotides. Intriguingly, the mismatched dCTP has an affinity similar to that of the matched nucleotides when it is incorporated against a pyrimidine template base flanked by a 5'-template guanine. The incoming dCTP likely skips the first available template base and base pairs with the 5'-template guanine, as observed in the crystal structure of Dpo4, DNA, and a mismatched nucleotide. The mismatch incorporation rates, regardless of the 5'-template base, were approximately 2-3 orders of magnitude slower than the incorporation rates for matched nucleotides, which is the predominant contribution to the fidelity of Dpo4.     

Structural basis of error‐prone replication and stalling at a thymine base by human DNA polymerase ι

Human DNA polymerase ι (polι) is a unique member of Y‐family polymerases, which preferentially misincorporates nucleotides opposite thymines (T) and halts replication at T bases. The structural basis of the high error rates remains elusive. We present three crystal structures of polι complexed with DNA containing a thymine base, paired with correct or incorrect incoming nucleotides. A narrowed active site supports a pyrimidine to pyrimidine mismatch and excludes Watson–Crick base pairing by polι. The template thymine remains in an anti conformation irrespective of incoming nucleotides. Incoming ddATP adopts a syn conformation with reduced base stacking, whereas incorrect dGTP and dTTP maintain anti conformations with normal base stacking. Further stabilization of dGTP by H‐bonding with Gln59 of the finger domain explains the preferential T to G mismatch. A template ‘U‐turn’ is stabilized by polι and the methyl group of the thymine template, revealing the structural basis of T stalling. Our structural and domain‐swapping experiments indicate that the finger domain is responsible for polι's high error rates on pyrimidines and determines the incorporation specificity.     

Toward understanding the mutagenicity of an environmental carcinogen: structural insights into nucleotide incorporation preferences

Bulky carcinogen-DNA adducts, including (+)-trans-anti-[BP]-N(2)-dG derived from the reaction of (+)-anti-benzo[a]pyrene diol epoxide with guanine, often block the progression of DNA polymerases. However, when rare bypass of the lesions does occur, they may be misreplicated. Experimental results have shown that nucleotides are inserted opposite the (+)-trans-anti-[BP]-N(2)-dG adduct by bacteriophage T7 DNA polymerase with the order of preference A>T>or=G>C. To gain structural insights into the effects of the bulky adduct on nucleotide incorporation within the polymerase active site, molecular modeling and molecular dynamics simulations were carried out using T7 DNA polymerase to permit the relation of function to structure. We modeled the (+)-trans-anti-[BP]-N(2)-dG adduct opposite incoming dGTP, dTTP and dCTP nucleotides, as well as unmodified guanine opposite its normal partner dCTP as a control, to compare with our previous simulation with dATP opposite the adduct. The modeling required that the (+)-trans-anti-[BP]-N(2)-dG adduct adopt the syn conformation in each case to avoid deranging essential protein-DNA interactions. While the dATP: (+)-trans-anti-[BP]-N(2)-dG pair was well accommodated within the active site of T7 DNA polymerase, dCTP fit poorly opposite the adduct, adopting an orientation perpendicular to the plane of the syn modified guanine during the simulation. Rotation about the glycosidic bond of the dCTP residue to this abnormal position was allowed because only one hydrogen bond between dCTP and the (+)-trans-anti-[BP]-N(2)-dG residue evolved during the simulation, and this hydrogen bond was directly across from the dCTP glycosidic bond. The dTTP and dGTP nucleotides, incorporated with an intermediate preference opposite (+)-trans-anti-[BP]-N(2)-dG, were accommodated reasonably well, but not as stably as the dATP nucleotide, due to a skewed primer-template alignment and more exposed BP moiety, respectively. In addition, the extent of stabilizing interactions between the nascent base-pair in each simulation was correlated positively with the incorporation preference of that particular nucleotide. The dATP nucleotide is accommodated most stably opposite the adduct, with protein-DNA hydrogen bonding interactions and an active-site pocket size that do not deviate significantly from those of the control simulation. The simulations of dTTP and dGTP opposite (+)-trans-anti-[BP]-N(2)-dG exhibited more instability in interactions between the protein and the nascent base-pair than the dATP system. However, the active-site pocket size of the dTTP and dGTP simulations remained stable. The dCTP: (+)-trans-anti-[BP]-N(2)-dG system had the least number of stabilizing interactions, and the active-site pocket of this system increased in size significantly compared to the control and other dNTPs opposite the adduct. These simulations elucidated why A is inserted opposite (+)-trans-anti-[BP]-N(2)-dG most frequently, while T and G are inserted opposite the adduct to an extent intermediate between A and C, and C is most rarely incorporated. Structural rationalization of the incorporation preference opposite (+)-trans-anti-[BP]-N(2)-dG by T7 DNA polymerase contributes to providing a molecular explanation for mutations caused by this carcinogen-DNA adduct in a model system.     

Pre-steady-state kinetic studies of the fidelity and mechanism of polymerization catalyzed by truncated human DNA polymerase lambda

DNA polymerase lambda (Pollambda), a member of the X-family DNA polymerases, possesses an N-terminal BRCT domain, a proline-rich domain, and a C-terminal polymerase beta-like domain (tPollambda). In this paper, we determined a minimal kinetic mechanism and the fidelity of tPollambda using pre-steady-state kinetic analysis of the incorporation of a single nucleotide into a one-nucleotide gapped DNA substrate, 21-19/41-mer (primer-primer/template). Our kinetic studies revealed an incoming nucleotide bound to the enzyme.DNA binary complex at a rate constant of 1.55 x 10(8) M(-1) s(-1) to form a ground-state ternary complex while the nucleotide dissociated from this complex at a rate constant of 300 s(-1). Since DNA dissociation from tPollambda (0.8 s(-1)) was less than 3-fold slower than polymerization, we measured saturation kinetics for all 16 possible nucleotide incorporations under single turnover conditions to eliminate the complication resulting from multiple turnovers. The fidelity of tPollambda was estimated to be in the range of 10(-2)-10(-4) and was sequence-dependent. Surprisingly, the ground-state binding affinity of correct (1.1-2.4 microM) and incorrect nucleotides (1.4-8.4 microM) was very similar while correct nucleotides (3-6 s(-1)) were incorporated much faster than incorrect nucleotides (0.001-0.2 s(-1)). Interestingly, the misincorporation of dGTP opposite a template base thymine (0.2 s(-1)) was more rapid than all other misincorporations, leading to the lowest fidelity (3.2 x 10(-2)) among all mismatched base pairs. Additionally, tPollambda was found to possess weak strand-displacement activity during polymerization. These biochemical properties suggest that Pollambda likely fills short-patched DNA gaps in base excision repair pathways and participates in mammalian nonhomologous end-joining pathways to repair double-stranded DNA breaks.     

Structural basis for proficient incorporation of dTTP opposite O6-methylguanine by human DNA polymerase iota

O(6)-methylguanine (O(6)-methylG) is highly mutagenic and is commonly found in DNA exposed to methylating agents, even physiological ones (e.g. S-adenosylmethionine). The efficiency of a truncated, catalytic DNA polymerase ι core enzyme was determined for nucleoside triphosphate incorporation opposite O(6)-methylG, using steady-state kinetic analyses. The results presented here corroborate previous work from this laboratory using full-length pol ι, which showed that dTTP incorporation occurs with high efficiency opposite O(6)-methylG. Misincorporation of dTTP opposite O(6)-methylG occurred with ～6-fold higher efficiency than incorporation of dCTP. Crystal structures of the truncated form of pol ι with O(6)-methylG as the template base and incoming dCTP or dTTP were solved and showed that O(6)-methylG is rotated into the syn conformation in the pol ι active site and that dTTP misincorporation by pol ι is the result of Hoogsteen base pairing with the adduct. Both dCTP and dTTP base paired with the Hoogsteen edge of O(6)-methylG. A single, short hydrogen bond formed between the N3 atom of dTTP and the N7 atom of O(6)-methylG. Protonation of the N3 atom of dCTP and bifurcation of the N3 hydrogen between the N7 and O(6) atoms of O(6)-methylG allow base pairing of the lesion with dCTP. We conclude that differences in the Hoogsteen hydrogen bonding between nucleotides is the main factor in the preferential selectivity of dTTP opposite O(6)-methylG by human pol ι, in contrast to the mispairing modes observed previously for O(6)-methylG in the structures of the model DNA polymerases Sulfolobus solfataricus Dpo4 and Bacillus stearothermophilus DNA polymerase I.     

Major oxidative products of cytosine, 5-hydroxycytosine and 5-hydroxyuracil, exhibit sequence context-dependent mispairing in vitro.

Two major stable oxidation products of 2'-deoxycytidine are 2'-deoxy-5-hydroxycytidine (5-OHdC) and 2'-deoxy-5-hydroxyuridine (5-OHdU). In order to study the in vitro incorporation of 5-OHdC and 5-OHdU into DNA by DNA polymerase, and to check the base pairing specificity of these modified bases, 5-OHdCTP and 5-OHdUTP were synthesized. Incorporation studies showed that 5-OHdCTP can replace dCTP, and to a much lesser extent dTTP, as a substrate for Escherichia coli DNA polymerase I Klenow fragment (exonuclease free). However, 5-OHdUTP can only be incorporated into DNA in place of dTTP. To study the specificity of nucleotide incorporation opposite 5-hydroxypyrimidines in template DNA, 18- and 45-member oligodeoxyribonucleotides, containing an internal 5-OHdC or 5-OHdU in two different sequence contexts, were used. Translesion synthesis past 5-OHdC and 5-OHdU in both oligonucleotides occurred, but pauses both opposite, and one nucleotide prior to, the modified base in the template were observed. The specificity of nucleotide incorporation opposite 5-OHdC and 5-OHdU in the template was sequence context dependent. In one sequence context, dG was the predominant nucleotide incorporated opposite 5-OHdC with dA incorporation also observed; in this sequence context, dA was the principal nucleotide incorporated opposite 5-OHdU. However in a second sequence context, dC was the predominant base incorporated opposite 5-OHdC. In that same sequence context, dC was also the predominant nucleotide incorporated opposite 5-OHdU. These data suggest that the 5-hydroxypyrimidines have the potential to be premutagenic lesions leading to C-->T transitions and C-->G transversions.     

Altering DNA polymerase incorporation fidelity by distorting the dNTP binding pocket with a bulky carcinogen-damaged template

Fidelity of DNA polymerases is predominantly governed by an induced fit mechanism in which the incoming dNTP in the ternary complex fits tightly into a binding pocket whose geometry is determined by the nature of the templating base. However, modification of the template with a bulky carcinogen may alter the dNTP binding pocket and thereby the polymerase incorporation fidelity. High fidelity DNA polymerases, such as bacteriophage T7 DNA polymerase, are predominantly blocked by bulky chemical lesions on the template strand during DNA replication. However, some mutagenic bypass can occur, which may lead to carcinogenesis. Experimental studies have shown that a DNA covalent adduct derived from (+)-anti-BPDE [(+)-(7R,8S,9S,10R)-7,8-dihydroxy-9,10-epoxy-7,8,9,10-tetrahydrobenzo[a]pyrene], a carcinogenic metabolite of benzo[a]pyrene (BP), primarily blocks Sequenase 2.0, an exo(-) T7 DNA polymerase; however, a mismatched dATP can be preferentially inserted opposite the damaged adenine templating base within the active site of the polymerase [Chary, P., and Lloyd, R. S. (1995) Nucleic Acids Res. 23, 1398-1405]. The goal of this work is to elucidate structural features that contribute to DNA polymerase incorporation fidelity in the presence of this bulky covalent adduct and to interpret the experimental findings on a molecular level. We have carried out molecular modeling and molecular dynamics simulations with AMBER 6.0, investigating a T7 DNA polymerase primer-template closed ternary complex containing this 10S (+)-trans-anti-[BP]-N(6)-dA adduct in the templating position within the polymerase active site. All four incoming dNTPs were studied. The simulations show that the BP ring system fits well into an open pocket on the major groove side of the modified template adenine with anti glycosidic bond conformation, without disturbing critical polymerase-DNA interactions. However, steric hindrance between the BP ring system and the primer-template DNA causes displacement of the modified template adenine, so that the dNTP base binding pocket is enlarged. This alteration can explain the experimentally observed preference for incorporation of dATP opposite this lesion. These studies also rationalize the observed lower probabilities of incorporation of the other three nucleotides. Our results suggest that the differences in incorporation of dGTP, dCTP, and dTTP are due to the effects of imperfect geometric complementarity. Thus, the simulations suggest that altered DNA polymerase incorporation fidelity can result from adduct-induced changes in the dNTP base binding pocket geometry. Furthermore, plausible structural explanations for the observed effects of [BP]-N(6)-dA adduct stereochemistry on the observed stalling patterns are proposed.