Antimicrobial activity of a porcine myeloperoxidase against plant pathogenic bacteria and fungi

Porcine myeloperoxidase was evaluated for its antimicrobial activity against plant pathogenic bacteria and fungi. The results indicated that the enzyme, in the presence of a small amount of hydrogen peroxide, was effective against a broad spectrum of plant pathogens. The growth of seven bacterial species, including nine pathovars, from the genera Erwinia , Pseudomonas and Xanthomonas , was significantly inhibited by the enzyme at a concentration as low as 0·4 U ml⁻¹, while 4·0 U ml⁻¹ was lethal to all plant pathogenic bacteria examined. Myeloperoxidase, at 40 U ml⁻¹, was lethal to germinating spores from three isolates of the fungal plant pathogen Fusarium solani and two isolates from each of Colletotrichum gloeosporioides and C. malvarum . The enzyme's antifungal effects on the rice blast pathogen Magnaporthe grisea were studied both in vitro and on host plants. The enzyme significantly inhibited spore germination of two isolates of M. grisea races IC17 and IB49 at concentrations over 16 U ml⁻¹, and disintegration of fungal spore walls was caused by 80 U ml⁻¹. The enzyme was even more effective in reducing disease incidence of blast on young rice plants treated with 0·5 U ml⁻¹, while 2·5 U ml⁻¹ resulted in complete inhibition of infection. These results support and further extend the suggestion that myeloperoxidase could be used as a broad-spectrum biocontrol agent or as a transgenically expressed protein to combat diseases caused by plant pathogenic bacteria and fungi.     

Modification of culture conditions for production of the anti-tubercular hirsutellones by the insect pathogenic fungus Hirsutella nivea BCC 2594

Aims:  This work aimed to improve the production of anti-tubercular hirsutellones by the insect pathogenic fungus Hirsutella nivea BCC 2594.
Methods and Results:  The fungus was cultivated under different carbon/nitrogen sources and aerations (shake vs static flasks) to improve the production of the anti-tubercular alkaloids, hirsutellones A–D. Under the basal conditions, static cultivation at 25°C in minimum salt medium, only hirsutellone B and C were detected with maximum concentrations of 139·00 and 18·27 mg l⁻¹. Substitution of fructose for glucose and peptone for yeast extract increased the titres of hirsutellones A, B and C about two- to threefold. However, hirsutellone D was not detected in this medium. Culture agitation induced the production of hirsutellone D. As a result, the significant amounts of hirsutellones A–D were obtained with the concentration of 29·93, 169·63, 22·65 and 15·71 mg l⁻¹ within 15 days.
Conclusions:  Improved titres of hirsutellones in H. nivea BCC 2549 were achieved with an agitated (200 rev min⁻¹) fructose–peptone medium at 25°C.
Significance and Impact of the Study:  Improved yields of hirsutellones B–D will enable medicinal chemistry modifications leading to a development of a potential candidate for tuberculosis therapy.     

Effects of feeding and induction strategy on the production of BmR1 antigen in recombinant E. coli

Aim:  To investigate the effects of feeding and induction strategies on the production of Bm R1 recombinant antigen.
Methods and Results:  Fed-batch fermentation was studied with respect to the specific growth rate and mode of induction to assess the growth potential of the bacteria in a bioreactor and to produce high yield of Bm R1 recombinant antigen. Cells were grown at a controlled specific growth rate (μ_set) during pre-induction, followed by constant feeding postinduction. The highest biomass (24·3 g l⁻¹) was obtained during fed-batch process operated at μ_set of 0·15 h⁻¹, whereby lower μ_set (0·075 h⁻¹) gave the highest protein production (9·82 mg l⁻¹). The yield of Bm R1 was increased by 1·2-fold upon induction with 1 mmol l⁻¹ IPTG (isopropyl-β- d -thiogalactoside) compared to using 5 mmol l⁻¹ and showed a further 3·5-fold increase when the culture was induced twice at the late log phase.
Conclusions:  Combination of feeding at a lower μ_set and twice induction with 1 mmol l⁻¹ IPTG yielded the best result of all variables tested, promising an improved method for Bm R1 production .
Significance and Impact of the Study:  This method can be used to increase the production scale of the Bm R1 recombinant antigen to meet the increasing demand for Brugia Rapid^™, a commercial diagnostic test for detection of brugian filariasis.     

Production of tylosin in solid-state fermentation by Streptomyces fradiae NRRL-2702 and its gamma-irradiated mutant (γ-1)

Aims:  To develop solid-state fermentation system (SSF) for hyper production of tylosin from a mutant γ-1 of Streptomyces fradiae NRRL-2702 and its parent strain.
Methods and Results:  Various agro-industrial wastes were screened to study their effect on tylosin production in SSF. Wheat bran as solid substrate gave the highest production of 2500 μg of tylosin g⁻¹ substrate by mutant γ-1 against parent strain (300 μg tylosin g⁻¹ substrate). The tylosin yield was further improved to 4500 μg g⁻¹ substrate [70% moisture, 10% inoculum (v/w), pH 9·2, 30°C, supplemental lactose and sodium glutamate on day 9]. Wild-type strain displayed less production of tylosin (655 μg of tylosin g⁻¹ substrate) in SSF even after optimization of process parameters.
Conclusion:  The study has shown that solid-state fermentation system significantly enhanced the tylosin yield by mutant γ-1.
Significance and Impact of the Study:  This study proved to be very useful and resulted in 6·87 ± 0·30-fold increase in tylosin yield by this mutant when compared to that of wild-type strain.     

Antimicrobial effect and shelf-life extension by combined thermal and pulsed electric field treatment of milk

Aims:  The impact of a combined hurdle treatment of heat and pulsed electric fields (PEF) was studied on native microbiota used for the inoculation of low-fat ultra-high temperature (UHT) milk and whole raw milk. Microbiological shelf-life of the latter following hurdle treatment or thermal pasteurization was also investigated.
Methods and Results:  UHT milk was preheated to 30°C, 40°C or 50°C over a 60-s period, pulsed for 50  μ s or 60  μ s at a field strength of 40 kV cm⁻¹ or for 33  μ s at 50 kV cm⁻¹. Heat and PEF reduced the microbial count by a maximum of 6·4 log in UHT milk (50°C; 50 kV cm⁻¹, 33  μ s) compared to 6·0 log ( P  ≥ 0·05) obtained by thermal pasteurization (26 s, 72°C). When raw milk was treated with a combination of hurdles (50°C; 40 kV cm⁻¹, 60  μ s) a 6·0 log inactivation of microbiota was achieved and microbiological milk shelf-life was extended to 21 days under refrigeration (4°C) vs 14 days in thermally pasteurized milk. Native microbiota was decreased by 6·7 log following conventional pasteurization.
Conclusions:  The findings suggest that heat and PEF achieved similar inactivation of native microbiota in milk and longer stabilization of microbiological shelf-life than thermal pasteurization.
Significance and Impact of the Study:  A hurdle approach of heat and PEF could represent a valid milk processing alternative to conventional pasteurization. Hurdle treatment might also preserve native milk quality better due to less thermal exposure.     

Cyanobacteria from benthic mats of Antarctic lakes as a source of new bioactivities

Aims:  To exploit the cyanobacterial diversity of microbial mats growing in the benthic environment of Antarctic lakes for the discovery of novel antibiotic and antitumour activities.
Methods and results:  In all, 51 Antarctic cyanobacteria isolated from benthic mats were cultivated in the laboratory by optimizing temperature, irradiance and mixing. Productivity was generally very low (≤60 mg l⁻¹ d⁻¹) with growth rates ( μ ) in the range of 0·02–0·44 d⁻¹. Growth rates were limited by photosensitivity, sensitivity to air bubbling, polysaccharide production or cell aggregation. Despite this, 126 extracts were prepared from 48 strains and screened for antimicrobial and cytotoxic activities. Seventeen cyanobacteria showed antimicrobial activity (against the Gram-positive Staphylococcus aureus , the filamentous fungus Aspergillus fumigatus or the yeast Cryptococcus neoformans ), and 25 were cytotoxic. The bioactivities were not in accordance with the phylogenetic grouping, but rather strain-specific. One active strain was cultivated in a 10-l photobioreactor.
Conclusions:  Isolation and mass cultivation of Antarctic cyanobacteria and LC-MS (liquid chromatography/mass spectrometry) fractionation of extracts from a subset of those strains (hits) that exhibited relatively potent antibacterial and/or antifungal activities, evidenced a chemical novelty worthy of further investigation.
Significance and impact of the study:  Development of isolation, cultivation and screening methods for Antarctic cyanobacteria has led to the discovery of strains endowed with interesting antimicrobial and antitumour activities.     

Potential use of Tunisian Pituranthos chloranthus essential oils as a natural disinfectant

Aims:  To highlight the bactericidal and fungicidal activities of Tunisian Pituranthos chloranthus essential oils and to study their potential use as powerful and natural disinfectant.
Methods and Results:  The essential oils were obtained by hydro-distillation of the aerial part of P. chloranthus . The bactericidal and fungicidal properties of essential oils were investigated by using the NCCLS broth dilution method and the EN 1275 and EN 1276 European standard methods. High bactericidal and fungicidal effects of 1·87–3·75 and 7·5 mg l⁻¹ were obtained, respectively. Essential oils concentrations of 0·5% and 1% (w/v) allowed reductions in viability higher than 5 and 4 log units per ml for standard bacteria and fungi, respectively, within a contact time of 5 min under dirty conditions.
Conclusions:  Our results support the traditional uses of P. chloranthus as a natural disinfectant and insecticide. It could be used to manage life-threatening pathogens as well as food preservative.
Significance and Impact of the Study:  This natural disinfectant could play a vital role in alleviating the spread of pathogenic micro-organisms and environmental problems associated with the indiscriminate use of synthetic chemicals.     

A potent anti-oxidant property: fluorescent recombinant α-phycocyanin of Spirulina

Aims:  To express and product a fluorescent antioxidant holo-α-phycocyanin (PC) of Spirulina platensis ( Sp ) with His-tag (rHHPC; recombinant holo-α-phycocyaninof Spirulina platensis with His-tag) in 5-l bench scale.
Methods and Results:  A vector harbouring two cassettes was constructed: cpcA along with cpcE - cpcF in one cassette; ho1 - pcyA in the other cassette. Lyases CpcE/F of Synechocystis sp. PCC6803 ( S6 ) could catalyse the 82 site Cys in apo-α-PC of Sp linking with bilin chromophores, and rHHPC was biosynthesized in Escherichia coli BL21. The constant feeding mode was adopted, and transformant reached the biomass of rHHPC up to 0·55 g l⁻¹ broth in 5-litre bench scale. rHHPC was purified by Ni²⁺ affinity column conveniently. The absorbance and the fluorescence emission spectra of rHHPC had λ_max at 621 and 650 nm, respectively. The IC₅₀ values of rHHPC were 277·5 ± 25·8 μ g ml⁻¹ against hydroxyl radicals and 20·8 ± 2·2  μ g ml⁻¹ against peroxyl radicals.
Conclusions:  Combinational biosynthesis of rHHPC was feasible, and the constant feeding mode was adopted to produce good yields of rHHPC. Fluorescent rHHPC with several unique qualitative and quantitative features was effective on scavenging hydroxyl and peroxyl radicals.
Significance and impact of the study:  A potent antioxidant rHHPC was co-expressed, produced and characterized for nutritional and pharmacological values, which would help to develop phycobiliproteins' applications in their fluorescent and biological activities.     

Elaboration of an electroporation protocol for large plasmids and wild-type strains of Bacillus thuringiensis

Aims:  To elaborate an effective electroporation protocol for large plasmids and wild type strains of Bacillus thuringiensis .
Methods and Results:  The effect of DNA desalting, wall-weakening agency, cell growth conditions, electroporation solutions, and electric fields on electroporation efficiency was evaluated to optimize electroporation conditions for B. thuringiensis . By using this improved method, the greatest efficiency was reached 2 × 10¹⁰ CFU  μ g⁻¹ with pHT304, which is 10⁴ times higher than previously reported. Four large plasmids (29·1, 44·9, 58 and 60 kb) were successfully transferred into the acrystalliferous B. thuringiensis strain BMB171; these results have not been achieved with previous protocols. Three wild type B. thuringiensis strains which could not be transformed previously were also transferred successfully.
Conclusions:  This improved method is more efficient for small plasmids; it is also appropriate for large plasmids and wild type B. thuringiensis strains which were not transformed by previous procedures.
Significance and Impact of the Study:  The present study established an effective electroporation protocol for large plasmids and wild type strains of B. thuringiensis . This method is well suited for the cloning and expression of huge DNA fragments such as gene clusters in B. thuringiensis . It also can be used as a reference method for other Bacillus strains that are refractory to electroporate.     

Modelling the growth of Weissella cibaria as a function of fermentation conditions

Aims:  To investigate the effect of pH, water activity ( a _w) and temperature on the growth of Weissella cibaria DBPZ1006, a lactic acid bacterium isolated from sourdoughs.
Methods and Results:  The kinetics of growth of W. cibaria DBPZ1006 was investigated during batch fermentations as a function of pH (4·0–8·0), a _w (0·935–0·994) and temperature (10–45°C) in a rich medium. The growth curve parameters (lag time, growth rate and asymptote) were estimated using the dynamic model of Baranyi and Roberts (1994. A dynamic approach to predicting bacterial growth in food. Int J Food Microbiol 23, 277–294). The effect of pH, a _w and temperature on maximum specific growth rate (μ_max) were estimated by fitting a cardinal model. μ_max under optimal conditions (pH = 6·6, a _w = 0·994, T  = 36·3°C) was estimated to be 0·93 h⁻¹. Minimum and maximum estimated pH and temperature for growth were 3·6 and 8·15, and 9·0°C and 47·8°C, respectively, while minimum a _w was 0·918 (equivalent to 12·2% w/v NaCl).
Conclusions:  Weissella cibaria DBPZ1006 is a fast-growing heterofermentative strain, which could be used in a mixed starter culture for making bread.
Significance and Impact of the Study:  This is the first study reporting the modelling of the growth of W. cibaria , a species that is increasingly being used as a starter in sourdough and vegetable fermentations.     

Extrinsic control parameters for ozone inactivation of Escherichia coli using a bubble column

Aims:  To investigate the effect of extrinsic control parameters for ozone inactivation of E. coli in a bubble column.
Methods and Results:  Ozone inactivation of Escherichia coli ATCC 25922 in Tryptic Soya Broth was examined. The parameters studied included temperature (ambient, 20, 25 and 30°C), exposure time (up to 30 min), gas flow rate (0·03, 0·06, 0·12, 0·25, 0·5 and 0·75 l min⁻¹) and concentration level (five different levels). The efficacy of ozone treatment was a function of the parameters investigated and optimum control parameters of flow rate (0·12 l min⁻¹), temperature (ambient) and ozone concentration (75  μ g ml⁻¹) resulted in a t _d5 (time required to achieve 5 log reduction) of 20 min.
Conclusions:  Optimum control parameters of gas flow rate, ozone concentration and temperature are reported for E. coli inactivation within a bubble column.
Significance and Impact of the Study:  In 2001, the FDA approved use of ozone as a direct additive to food and in 2004, issued guidelines for the use of ozone in liquid systems. However, these guidelines highlighted gaps in the literature for ozonation of liquid foods. This study provides useful information regarding optimum extrinsic control parameters for E. coli inactivation in liquid media using a bubble column to ensure microbiological safety.     

Automated concentration and recovery of micro-organisms from drinking water using dead-end ultrafiltration

Aims:  Concentration of pathogens diluted in large volumes of water is necessary for their detection. An automated concentration system placed online in drinking water distribution systems would facilitate detection and mitigate the risk to public health.
Methods and Results:  A prototype concentrator based on dead-end hollow fibre ultrafiltration was used to concentrate Bacillus atrophaeus spores directly from tap water. Backflush was used to recover accumulated particulates for analysis. In field tests conducted on a water utility distribution system, 3·2 × 10⁴–1·4 × 10⁶ CFU ml⁻¹ (6·1 × 10⁶–3·0 × 10⁸ CFU) were recovered from the filter when 2·9 × 10⁷–1·0 × 10⁹ CFU were spiked into the system. Per cent recovery ranged from 21% to 68% for flow volumes of 15–21 l. Tests using spore influent levels <10 CFU l⁻¹ (spike < 1000 CFU) yielded 23–40% recovery for volumes >100 l.
Conclusions:  B. atrophaeus spores at levels <10 CFU l⁻¹ were concentrated directly from tap water using an automated dead-end hollow-fibre ultrafiltration system.
Significance and Impact of the Study:  The prototype concentrator represents a critical step towards an autonomous system that could be installed in drinking water distribution lines or other critical water lines to facilitate monitoring. Recovered samples can be analysed using standard or rapid biosensor methods.     

Acrebol, a novel toxic peptaibol produced by an Acremonium exuviarum indoor isolate

Aims:  To identify a toxin and its producer isolated from woody material in a building where the occupants experienced serious ill health symptoms.
Methods and Results:  Hyphal extracts of an indoor fungus, identified as the cycloheximide-tolerant species Acremonium exuviarum , inhibited motility of boar spermatozoa (EC₅₀ 5 ± 2 μg of crude solids ml⁻¹) and caused cytolysis of murine neuroblastoma cells (MNA) and feline fetal lung cells (FL). The responsible substances were purified and identified as two structurally similar, heat-stable, novel, toxic peptaibols, 1726 Da and 1740 Da, respectively, with amino acid sequences of Acetyl-Phe-Iva/Val-Gln-Aib-Ile-Thr-Leu-Aib-Pro-Aib-Gln-Pro-Aib-(X-X-X)-SerOH and Acetyl-Phe-Iva/Val-Gln-Aib-Ile-Thr-Leu-Val-Pro-Aib-Gln-Pro-Aib-(X-X-X)-SerOH. Purified acrebol inhibited motility of boar sperm, depleted ATP half-content in 1 day (EC₅₀ of 0·1 μg ml⁻¹, 60 nmol l⁻¹) depolarised the mitochondria after 2 days, but did not affect the cellular content in NADH. This indicates mitochondrial toxicity. Plate-grown biomass of A. exuviarum BMB4 contained 0·1–1% (w/w) of acrebol, depending on the culture medium.
Conclusions:  Acrebol paralysed the energy generation of mammalian cells suggesting that mitochondria were its target of action.
Significance and Impact of the Study:  Acremonium exuviarum, as an indoor fungus, is potentially hazardous to health because of the toxic peptaibols that it produces.     

3-Methylindole production is regulated in Clostridium scatologenes ATCC 25775

Aims:  3-Methylindole (3-MI) is a degradation product of l -tryptophan and is both an animal waste malodorant and threat to ruminant health. Culture conditions influencing 3-MI production in Clostridium scatologenes ATCC 25775 were investigated.
Methods and Results:  Extracellular 3-MI levels in cells cultured in brain heart infusion (BHI) medium (pH 7·0) at 33°C and 37°C for 72 h were 907 ± 38 and 834 ± 121  μ mol l⁻¹, respectively. Cells cultured in tryptone-yeast (TY) extract medium at 37°C for 48 h produced 104 ± 86  μ mol l⁻¹ 3-MI; however, addition of 1 mmol l⁻¹  l -tryptophan failed to increase extracellular levels (113 ± 50  μ mol l⁻¹ 3-MI). Specific activity of indole acetic acid decarboxylase measured in BHI, TY and TY plus 1 mmol l⁻¹ tryptophan-grown cells displayed 35-, 33- and 76-fold higher levels than in semi-defined medium-grown cells.
Conclusions:  When cultured in rich medium, at 33°C or 37°C and pH 7·0, Cl. scatologenes ATCC 25775 optimally produced 3-MI. Addition of l- tryptophan to medium did not lead to significant increases in extracellular 3-MI levels. Whole cell assays indicate growth in rich medium significantly up-regulated 3-MI production.
Significance and Impact of the Study:  Information presented here may prove useful in understanding what factors influence 3-MI production in malodorous animal wastes.     

Use of superabsorbent polymer gels for surface decontamination of Bacillus anthracis spores

Aims:  This study evaluated the inactivation of Bacillus anthracis Vollum spores dried on a nonporous surface using a superabsorbent polymer (SAP) gel containing commercially available liquid decontaminants.
Methods and Results:  The first phase determining the availability of the liquid decontaminant within the SAP showed that the SAP gel containing pH-adjusted sodium hypochlorite (NaOCl) inhibited B. anthracis growth while the water control SAP gel had no affect on growth. For testing surface decontamination, B. anthracis spores were dried onto steel coupons painted with chemical agent resistant coating and exposed to SAP containing either pH-adjusted NaOCl, chlorine dioxide (ClO₂) or hydrogen peroxide/peracetic acid (H₂O₂/PA) for 5 and 30 min. At contact times of both 5 and 30 min, all of the SAP gels containing pH-adjusted NaOCl, ClO₂ or H₂O₂/PA inactivated B. anthracis spores at levels ranging from 2·2 to ≥7·6 log reductions.
Conclusions:  Incorporation of three commercially available decontaminant technologies into a SAP gel promotes inactivation of B. anthracis spores without observable physical damage to the test surface.
Significance and Impact of the Study:  This work provides preliminary data for the feasibility of using SAP in inactivating B. anthracis spores on a nonporous surface, supporting the potential use of SAP in surface decontamination.     

Regulation of tacrolimus production by altering primary source of carbons and amino acids

Aims:  In the present communication, attempts have been made to regulate the tacrolimus production by supplementing commercial source of carbons and amino acids timely.
Methods and Results:  Tacrolimus production was regulated by supplying vegetable oils and amino acids, individually and in combination. Tacrolimus quantification was done by HPLC. Streptomyces spp. MA6858 B3178 was found to produce 115·3 mg l⁻¹ of tacrolimus. The rotation speed of shake flask, pH of the broth and supply of air were maintained at 7·1, 230 rev min⁻¹ and 2·0 vvm air respectively.
Conclusions:  The effect of carbons on tacrolimus production was noticed to be of diphasic manner. During the first 24 h of culture, monosaccharide is used for the growth of microbe. However, after the lapse of 36 h, addition of soya oil and l -lysine in combination enhanced the tacrolimus production to 115·3 mg l⁻¹. Besides this, pH of broth was also noticed as a critical factor in monitoring tacrolimus biosynthesis.
Significance and Impact of the Study:  The newly isolated mutant Streptomyces spp. MA6858 B3178 having high potential for tacrolimus production as compared to existing data can be well used for the commercialization of tacrolimus.     

Combined effect of organic acids and supercritical carbon dioxide treatments against nonpathogenic Escherichia coli, Listeria monocytogenes, Salmonella typhimurium and E. coli O157:H7 in fresh pork

Aims:  To evaluate the effectiveness of organic acids and supercritical carbon dioxide (SC-CO₂) treatments as well as their combined effect for the reduction of nonpathogenic Escherichia coli and three pathogenic bacteria in fresh pork.
Methods and Results:  The different treatment conditions were as follows: (i) treatment with acetic (1%, 2% or 3%) or lactic acid (1%, 2% or 3%) only, (ii) treatment with SC-CO₂ at 12 MPa and 35°C for 30 min only and (iii) treatment with 3% acetic or lactic acid followed by treatment with SC-CO₂. Within the same organic acid concentration, the lactic and acetic acid treatments had similar reductions. For the combined treatment of lactic acid and SC-CO₂, micro-organism levels were maximally reduced, ranging from 2·10 to 2·60 log CFU cm⁻² ( E. coli , 2·58 log CFU cm⁻²; Listeria monocytogenes , 2·60 log CFU cm⁻²; Salmonella typhimurium , 2·33 log CFU cm⁻²; E. coli O157:H7, 2·10 log CFU cm⁻²).
Conclusions:  The results of this study indicate that the combined treatments of SC-CO₂ and organic acids were more effective at destroying foodborne pathogens than the treatments of SC-CO₂ or organic acids alone.
Significance and Impact of the Study:  The combination treatment of SC-CO₂ and organic acids may be useful in the meat industry to help increase microbial safety.     

Sucrose phosphorylase of the rumen bacterium Pseudobutyrivibrio ruminis strain A

Aims:  To verify the taxonomic affiliation of bacterium Butyrivibrio fibrisolvens strain A from our collection and to characterize its enzyme(s) responsible for digestion of sucrose.
Methods and Results:  Comparison of the 16S rRNA gene of the bacterium with GenBank showed over 99% sequence identity to the species Pseudobutyrivibrio ruminis . Molecular filtration, native electrophoresis on polyacrylamide gel, zymography and thin layer chromatography were used to identify and characterize the relevant enzyme. An intracellular sucrose phosphorylase with an approximate molecular mass of 52 kDa exhibiting maximum activity at pH 6·0 and temperature 45°C was identified. The enzyme was of inducible character and catalysed the reversible conversion of sucrose to fructose and glucose-1-P. The reaction required inorganic phosphate. The K _m for glucose-1-P formation and fructose release were 3·88 × 10⁻³ and 5·56 × 10⁻³ mol l⁻¹ sucrose, respectively – while the V _max of the reactions were −0·579 and 0·9  μ mol mg protein⁻¹ min⁻¹. The enzyme also released free glucose from glucose phosphate.
Conclusion:  Pseudobutyrivibrio ruminis strain A utilized sucrose by phosphorolytic cleavage.
Significance and Impact of the Study:  Bacterium P. ruminis strain A probably participates in the transfer of energy from dietetary sucrose to the host animal.     

Comparison of methods to detect resistance of Penicillium expansum to thiabendazole

Aims:  Because of the lack of a standard method, the aim of this work is to evaluate the suitability of the broth microdilution method CLSI M38-A in determining the resistance level of some Penicillium expansum isolates to thiabendazole (TBZ). The ability of the isolates to produce patulin (PAT) and citrinin (CIT) has been also assessed.
Methods and Results:  Penicillium expansum isolates (128) were assayed (apples, pears, grapes and five reference strains). It was observed that 69·4% of the strains isolated from apples and pears were resistant to TBZ. Sensitive isolates were inhibited at 0·25–0·5 μg ml⁻¹ whilst resistant isolates still grew at 512 μg ml⁻¹. PAT was produced by all P. expansum isolates. CIT was detected in 98·8% of TBZ-resistant isolates and in 89·1% of the TBZ-sensitive isolates.
Conclusions:  The preliminary screening method combined with the adaptation of the method CLSI M38-A, can be a good strategy to be used in assessing the in vitro activity of TBZ against a large number of isolates.
Significance and Impact of the Study:  The proposed methodology can be a contribution to the standardization of susceptibility tests to fungicides against P. expansum.     

Optimization of medium constituents for improved chitinase production by Paenibacillus sp. D1 using statistical approach

Aims:  Statistical optimization of medium components for improved chitinase production by Paenibacillus sp. D1.
Methods and Results:  Urea, K₂HPO₄, chitin and yeast extract were identified as significant components influencing chitinase production by Paenibacillus sp. D1 using Plackett–Burman method. Response surface methodology (central composite design) was applied for further optimization. The concentrations of medium components for improved chitinase production were as follows (g l⁻¹): urea, 0·33; K₂HPO₄, 1·17; MgSO₄, 0·3; yeast extract, 0·65 and chitin, 3·75. This statistical optimization approach led to the production of 93·2 ± 0·58 U ml⁻¹ of chitinase.
Conclusions:  The important factors controlling the production of chitinase by Paenibacillus sp. D1 were identified as urea, K₂HPO₄, chitin and yeast extract. Statistical approach was found to be very effective in optimizing the medium components in manageable number of experimental runs with overall 2·56-fold increase in chitinase production.
Significance and Impact of the Study:  The present investigation provides a report on statistical optimization of medium components for improved chitinase production by Paenibacillus sp. D1. Paenibacillus species are gram-positive, spore-forming bacteria with several PGPR and biocontrol potentials. However, only few reports concerning mycolytic enzyme production especially chitinases are available. Chitinase produced by Paenibacillus sp. D1 represents new source for biotechnological and agricultural use.