Preparation and characterization of new and improved soluble-starches, -amylose, and -amylopectin by reaction with benzaldehyde/zinc chloride

Seven different starches from potato, rice, maize, waxymaize, amylomaize-VII, shoti, and tapioca, and potato amylose and potato amylopectin have been reacted with benzaldehyde, catalyzed by ZnCl₂, to give new water-soluble starches and water soluble-amylose and soluble-amylopectin. In contrast to the native starches, aqueous solutions of the modified starches could not be precipitated with 2-, 3-, or 4-volumes of ethanol. β-Amylase gave no reaction with the modified starches, in contrast to the native starches, indicating that the modification occurred exclusively at the nonreducing-ends, giving 4,6-benzylidene-d-glucopyranose at the nonreducing-ends. Reactions of α-amylase with native and modified potato and rice starches gave a decrease in the triiodide blue color and an increase in the reducing-value that were similar for the native- and modified-starches, indicating the modified starches had not been significantly altered by the modification. The benzaldehyde-modified starches and benzaldehyde-modified potato amylose and potato amylopectin components, therefore, have a starch structure very much like their native counterparts, in contrast to the Lintner, Small, and the alcohol/acid-hydrolyzed soluble-starches that have undergone acid hydrolysis. The benzaldehyde-modified starches and starch components have significantly higher water solubility than their native counterparts even though the structures of the modified starches had only been slightly altered from the structures of their native counterparts. They all gave crystal-clear solutions that did not retrograde.     

Composition, structure, functionality, and chemical modification of legume starches: a review

The major carbohydrate of the legume seed is starch, which represents up to 45% of the total seed weight. In recent years, substantial progress has been made in understanding the relationship between starch structure and functionality. However, these studies have been mainly on cereal and tuber starches. The present status of knowledge on the composition, structure, functionality, digestibility, and chemical modification of legume starches is reviewed. In addition present concepts of granule structure, gelatinization, retrogradation, and rheology are also reviewed. Future research needs in the area of legume starch chemistry are discussed.     

Engineering starch for increased quantity and quality

The characterization and production of starch variants from mutation studies and transgene technology has been invaluable for our understanding of the synthesis of the starch granule. The knowledge gained has allowed for genetic manipulation of the starch biosynthetic pathway in plants. This in vivo approach can be used to generate novel starches and diminishes the need for post-harvest chemically and enzymatically treated starches. Thus, the modification of the starch biosynthetic pathway is a plausible means by which starches with novel properties and applications can be created.     

Starch modification by iterated syneresis

Potato, tapioca, corn and wheat starches were solubilised in water and isolated from the solution by iterated syneresis and the effect of this physical modification on the physicochemical properties and structure was studied. The experimental starches were examined by chemical analysis, the Brabender rheological method, scanning electron or light microscopy, X-ray diffractometry, infrared spectroscopy, and differential scanning calorimetry. Physical modification was evidenced to the change starch–water interaction and the structure of starches. Pasting temperature shifted to lower values and the gelatinisation mechanism changed. All modified starches had a B-type of X-ray diffraction pattern. The melting temperature of starch crystallites was typical of retrograded starch, but the enthalpy change was higher. The correlation between the resistant starch content of modified starches and their crystal structure was discussed together with the thermal properties.     

Effects of structure and modification on sustained release properties of starches

Starches of different sources and compositions were investigated to determine the effect of structure and chemical modification on the sustained release properties of the resultant modified starches. Starches were cross-linked with epichlorohydrin and substituted with carboxymethyl or aminoethyl groups at different levels. Substitution efficiency was overall higher for waxy corn and potato starches than for Hylon VII, and was higher for starches at low cross-linking levels than those at high cross-linking ones. Waxy corn starch displayed better sustained release properties when cross-linked to a lower level, whereas Hylon VII showed better performances when cross-linked to a higher level. Matrices substituted with carboxymethyl and aminoethyl groups at the high level showed better sustained release properties than those substituted at the low level. The proportion and structure of amylose and amylopectin in starches from different botanical sources strongly influenced the level of modification required to produce a satisfactory sustained release matrix.     

Effect of the cross-linked reagent type on some morphological,physicochemical and functional characteristics of banana starch (Musa paradisiaca)

Cross-linked starches have increased their importance due to their applications such as adsorbents of heavy metals. In this work the effect the reagent used in the chemical modification of banana starch and its impact on some morphological, physicochemical and functional characteristics was evaluated. The reagent used in the cross-linked of starch decreased the fat and protein content, whereas ash level were higher. The morphology of the granules, observed by scanning electron microscopy, was more affected when a blend of sodium trimetaphosphate (STMP)/sodium tripolyphosphate (STPP) and epichlorohydrin (EPI) were used in the modification. The cross-linked starches presented a bimodal distribution and the effect was more conspicuous in those starches modified with STMP/STPP and EPI. The swelling value (60 °C) increased with the cross-linking and the highest value was obtained in those starches modified with STMP/STPP and EPI. However, at higher temperatures the swelling values of cross-linked starches with STMP/STPP and EPI decreased as temperature increased (80 °C), and there after the value was constant. The cross-linked starches with STMP/STPP and EPI showed the lowest solubility values. The cross-linked starch with POCl₃ (phosphorous oxychloride) showed a slight decrease in the onset and peak temperatures compared with its native counterpart, but those modified with STMP/STPP and EPI presented an increase in the three transition temperatures, but a decrease in enthalpy value. The results obtained can be used to determine the type of reagent used for cross-linked in order to obtain a starch with specific characteristics.     

Cationic starch: an effective flocculating agent

A series of cationic starches (Cat St) have been developed by incorporating a cationic moiety N-(3-Chloro-2-hydroxypropyl) trimethyl ammonium chloride (CHPTAC) onto the backbone of starch in presence of NaOH. The cationic starches are characterized by elemental analysis, FTIR spectroscopy and intrinsic viscosity measurement. The flocculation characteristics of these starches have been evaluated in 0.25 wt% silica suspension by jar test. It has been found that among the four cationic starches, the one with longer CHPTAC chains shows the best performance. The flocculation characteristics of this starch are on silica suspensions compared with various commercially available flocculants.     

Enzymatic degradation and electrospray tandem mass spectrometry as tools for determining the structure of cationic starches prepared by wet and dry methods

Cationic starches from various semi-technical processes, two 'wet' (slurry and paste modification) and two 'dry' procedures (dry modification and extrusion), each type in a DS range from 0.03 to 0.1, were investigated by electrospray ionisation mass spectrometry (ESIMS) and tandem mass spectrometry (ESIMS2) after enzymatic degradation with alpha-amylase and subsequent glucoamylase digestion. For comparison, chemically derived cationic oligosaccharides were also analysed by ESIMS. The cationisation pattern in the glucosyl units was analysed by GLC after methanolysis, permethylation and Hofmann elimination. Results from ESIMS are discussed and interpreted with respect to enzyme susceptibility, monomer composition and physical properties of the different types of cationic starches.     

Preparation and characterization of soluble starches having different molecular sizes and composition,by acid hydrolysis in different alcohols

Potato and waxy-maize starches were separately modified for 1 h at 65° with 0.36% hydrochloric acid in methanol, ethanol, 2-propanol, and 1-butanol. All of the modified starches were readily soluble in hot water, to give crystal-clear solutions up to a concentration of at least 20% (w/v). The modified granules were studied by light-microscopy and iodine-iodide staining. All of the modified starches retained their granule appearance, although with various degrees of damage that progressively increased from methanol to 1-butanol. Both hydrolysis and alcoholysis occurred, but to different extents in the different alcohols. The highest proportion of alcoholysis occurred in methanol where 50% of the resulting molecules were glycosides, the lowest in 1-butanol where 6% were glycosides. The number-average molecular weights of the modified starches also progressively decreased from 126,670 for the methanol-modified waxy-maize starch to 4,750 for the 1-butanol-modified potato starch. The methanol- and ethanol-modified potato starches were fractionated into amylose and amylopectin components. The 2-propanol- and 1-butanol-modified potato starches gave only an amylopectin component. The amylose components were characterized by gel-permeation chromatography on Bio-Gel A-5m, and the amylopectin components, on Bio-Gels A-150m and A-0.5m. The molecular sizes of the amylose and amylopectin components progressively decreased from methanol- to 1-butanol-modified starches. Furthermore, the polymodal composition of the amylopectin component was decreased to give a more homogeneous product. Waxy-maize starch was modified in methanol and 2-propanol and gave products that were of lower molecular size and more homogeneous than the polymodal native starch. It is shown that the differential effect of the different alcohols on the modification of the starch granules is produced by effecting different concentrations of acid inside the granule, where hydrolysis occurs in the 10–12% of water contained in the granule. It is postulated that 2-propanol and 1-butanol dissolve the double-helical, crystalline regions in the starch granule to give different types of products under otherwise identical conditions of modification.     

Production of a freeze-thaw-stable potato starch by antisense inhibition of three starch synthase genes

The use of unmodified starches in frozen foods is severely limited by the undesirable textural changes that occur after freezing and thawing. Retrogradation of glucan chains leads to syneresis, a separation of the starch gel and water phases. Stabilization of the starch structure is normally achieved by chemical modification to prevent these changes from occurring. We have now created a freeze-thaw-stable potato starch by alteration of starch composition and structure by genetic modification. An amylose-free starch with short-chain amylopectin was produced by simultaneous antisense downregulation of three starch synthase genes. This starch is extremely freeze-thaw-stable and shows no syneresis even after five freeze-thaw cycles. The use of this starch has potential for environmental and consumer benefits because its production requires no chemical modification.     

Cold Plasma: an Alternative Technology for the Starch Modification

Cold plasma is an emerging novel non-thermal technology in the sector of food processing. In the present review we will discuss the recent scientific reports on properties of cold plasma treated starches. For industrial use native starch is subject to modification to enhance the properties. This paper reviews on the mechanism of starch modification by plasma reactive species, briefly discussing its effects on properties. The effect of cold plasma on starches depends on the type of feed gas, voltage applied and treatment time. The alteration in the properties is mainly due to depolymerization and cross linking of amylose and amylopectin side chains. After plasma treatment there is decrease in molecular weight, viscosity, and gelatinization temperatures. Plasma etching increased the surface energy and enhanced the hydrophilicity of the starch granules. We can conclude that cold plasma is as alternative technology to modify the properties of starch.     

Determination of the maximum water solubility of eight native starches and the solubility of their acidic-methanol and -ethanol modified analogues

The maximum water solubilities of eight native starches from potato, shoti, tapioca, maize, waxy maize, amylomaize-7, wheat, and rice and their acid-methanol and acid-ethanol modified analogues have been determined. Maximum solubilities of 18.7 and 17.4 mg/mL were obtained for waxy maize and tapioca and 12.4 mg/mL for potato and maize starches by autoclaving 220 mg/10 mL at 121 degrees C; 8.7 mg/mL was obtained for shoti starch by stirring in 85:15 (v/v) Me(2)SO-H(2)O at 20 degrees C; and 7.0 and 5.2mg/mL for rice and amylomaize-7 starches by stirring in 1M NaOH at 20 degrees C. The acid-alcohol treated starches were 4-9 times more soluble than their native starches. The compositions of the solubilized starches had, in general, much higher ratios of amylose to amylopectin than the ratios in their native granules. A major exception to this was the acid-methanol treated potato, shoti, and rice starches that had much lower ratios of amylose to amylopectin than the ratios in their granules.     

Effects of an added inclusion-amylose complex on the retrogradation of some starches and amylopectin

The effects of added cetyltrimethylammonium bromide (CTAB)-amylose complex on retrogradation of some starches (waxy-maize, maize, and potato starch) and on amylopectin from potato have been studied by differential scanning calorimetry (DSC). The starches and amylopectin samples with added CTAB-amylose complex received four different heat treatments prior to storage and DSC measurements that either melted the complex or left the complex intact. The calorimetry measurements showed that intact CTAB-amylose complex had much less effect on decreasing the retrogradation of the starches and the amylopectin than samples with melted complex prior to measurements. This is discussed in relation to possible complex formation of amylopectin and lipids and the effects of adding uncomplexed lipids on the retrogradation of waxy starches and amylopectin.     

Process optimization for the synthesis of octenyl succinyl derivative of waxy corn and amaranth starches

Modification of starch by dicarboxylic acid anhydrides to starch esters, containing both hydrophilic and hydrophobic groups are known to improve its emulsification properties, and can also be used for encapsulation after hydrolysis. Reports on the effect of process conditions on the extent of modification of starches by using n-octenyl succinic anhydride (n-OSA) are not readily available. In the present study, the process of manufacturing of OSA starches from waxy corn and amaranth starch were studied with respect to the OSA/starch ratio, pH, temperature and time of the reaction. The effects of these parameters were evaluated on the basis of degree of substitution (DS). The concluding conditions for amaranth-OSA starches was a reaction time of 6 h at 3% OSA/starch ratio at 30 °C and pH 8.0 at 25% starch concentration. For waxy corn-OSA starch, all parameters were identical except for the reaction time of 24 h. The maximum DS achieved for both the starches was 0.02. Emulsification capacity and oil absorption capacity of the OSA-modified starches were more or less similar within the parameter chosen and also independent of starch type.     

Enzymatic degradation of hydroxypropyltrimethylammonium wheat starches

The enzymatic degradation of hydroxypropyltrimethylammonium modified starches synthesised by dry process was compared with that of hydroxypropyltrimethylammonium modified starches synthesised in glycerol–water plasticised molten medium. The enzymatic degradation rate of products from both origins decreased as the degree of substitution increased. However, two distinct enzymatic degradation profiles were obtained. Dry process products displayed a regular decrease pattern as DS increased. Molten medium synthesised cationic starches displayed a constant degradation level on a wide DS range with ,β-amylase and amyloglucosidase, whereas isoamylase degradation rapidly reached its degradation limit at DSs 0.05. The various plasticising conditions used to synthesise cationic starch in molten medium show no influence on the enzymatic degradation.

By measuring the affinity of -amylase, β-amylase and isoamylase for native, extruded non-modified and hydroxypropyltrimethylammonium-modified starches. It was evident that the enzymes’ affinity for the substrate diminishes with increasing chemical modification, particularly in the case of -amylase, suggesting that the location of cationic groups impairs the enzyme’s recognition of the substrate. Structural elements of limit dextrins were analysed by ¹H NMR.     

Estimation and fractionation of the essentially unbranched (amylose) and branched (amylopectin) components of starches with concanavalin A

Conditions have been devised for the quantitative precipitation of the branched fraction in starches by concanavalin A and the enzymic estimation of the - -glucan in this and the soluble components. For some starches, such as those from cereal and high-amylose pea seeds, the percentage of branched fraction determined by this procedure was higher than that calculated by deducting from one hundred the apparent amylose content as measured by potentiometric iodine titration, suggesting a method for estimating the content of material having an atypical structure in the whole starch. The procedure has been adapted to provide a preparative method of separating amylose and amylopectin fractions. It efficiently separated these in starches that cannot be fully fractionated by complexing with 1-butanol, such as those from high-amylose pea seeds and tobacco leaves.     

枸杞花药发育过程中脂滴和淀粉粒的分布特征

宁夏枸杞(Lycium barbarurn L．)花药发育过程中,淀粉粒和脂滴两种营养物质的积累和分布具有一定的特点：在造孢细胞时期,药隔薄壁细胞,表皮和药室内壁细胞中开始积累淀粉粒,而造孢细胞、绒毡层细胞和中层细胞中则没有淀粉粒。在四分体时期,绒毡层细胞开始积累脂滴并且数量逐渐增加。到小孢子晚期,绒毡层细胞降解,内含脂滴流入药室中。在小孢子发育过程中既没有淀粉粒也没有脂滴积累,直到二胞花粉的大液泡消失后花粉粒中才开始积累脂滴,然后又开始出现淀粉粒。枸杞成熟花粉中的营养储存物是脂滴和淀粉粒。     

Field performance and starch characteristics of high-amylose potatoes obtained by antisense gene targeting of two branching enzymes

Potato is an important crop for starch production, but there are limitations regarding the genetic variation of starch quality. In maize, starches with various properties have been available for a long time by mutational breeding. Amylose starch from potatoes differs from cereal amyloses in several functionally important aspects, such as a higher degree of polymerization. Areas of application in which the degree of polymerization is of importance include film forming and the polymeric properties of bioplastics. High-amylose potato lines have been achieved by inhibiting the two known branching enzyme forms of potato. A single inserted gene construct for the inhibition of both forms resulted in structural changes of the starch to levels of branching that were below the commercially available amylose standards of potato. The high-amylose potato lines were tested in multiple year field trials of agronomic performance and were used for the pilot plant production of starch. The introduced trait was confirmed to be stable over multiple years. The consequences of the modification were found to be an increased tuber yield, reduced starch content, smaller granule size and an increase in reducing sugars.     

Amylose content and chemical modification effects on thermoplastic starch from maize – Processing and characterisation using conventional polymer equipment

A design of experiments was performed on extruded starch based materials studied in a recently published article [Chaudhary, A. L., Miler, M., Torley, P. J., Sopade, P. A., & Halley, P. J. (2008). Amylose content and chemical modification effects on the extrusion of thermoplastic starch from maize. Carbohydrate Polymers, 74(4), 907–913] highlighting the effects of amylose content, chemical modification and extrusion on a range of maize starches. An investigation into the effects of starch type (unmodified 0–80% amylose starch; hydroxypropylated 80% amylose starch), screw speed and ageing after moulding on final product properties such as mechanical properties (Young’s modulus, maximum stress and strain at break), moisture absorption, morphology and retrogradation are included. A full factorial design was used to study these starch type, processing and final product property relationships. Microscopy was used to observe any morphological difference between the various starch types in thermoplastic starch (TPS) blends and X-ray diffraction (XRD) was used to observe changes in crystallinity over time (retrogradation). The results show that 0% amylose (waxy maize) and hydroxypropylated 80% amylose thermoplastic starches have mechanical properties comparable to that of low density polyethylene (LDPE) and high density polyethylene (HDPE), therefore these materials have the potential to be an environmentally friendly alternative to current polymer resins.     

Physicochemical characteristics and fine structure of high-amylose wheat starches isolated from Australian wheat cultivars

High-amylose starch is a source of resistant starch (RS) which have great impact on human health like dietary fiber. Nowadays, high-amylose wheat has been produced by genetic backcrossing, which enhances apparent amylose content and generates altered amylopectin. In this study, the high-amylose wheat starches isolated from various high-amylose wheat cultivars grown in Australia were characterized for understanding their physicochemical properties and fine structure of starch. The physicochemical characteristics of the high-amylose wheat starches are significantly different among the cultivars. Amylose contents of these cultivars were in a range of 28.0–36.9%, which is significantly higher than that of the normal wheat starch (25.6%). The high-amylose wheat starches also had higher blue value but lower λ_max than the normal wheat starch. Gelatinization temperature of the high-amylose wheat starches is higher than that of the normal wheat starch but transition enthalpy is lower. X-ray diffraction showed that the high-amylose wheat starch had C-type crystals close to A-type crystal. Pasting properties of the high-amylose wheat starches were varying depending on the cultivars. However, almost high-amylose wheat starches had lower peak and final viscosities and higher setback viscosity than did the normal wheat starch. Fine structure of amylose and amylopectin was different among the high-amylose wheat cultivars and related to the physicochemical properties of starch. These results help to understand well the characteristics of the high-amylose wheat starches before application for food processing.