Silver ion microplates for immunoassays.

Microplate wells can be coated with silver ions using glutaraldehyde as a spacer molecule and thiourea as a complexing ligand. Microwells containing surface silver ions are shown to immobilize biotin-labeled horseradish peroxidase (HRP) in active form, while showing very little affinity for the unlabeled enzyme. These plates can also immobilize biotin-labeled antibodies that exhibit bioactivity after immobilization. Silver ions are needed for the complexation of the biotinylated enzyme or antibody because microwells modified to contain surface amine or thiourea molecules do not immobilize appreciable amounts of the labeled proteins. A maximum surface coverage for biotin-labeled HRP of 40 ng/cm2 and an immobilization binding constant of Km = 8 x 10(9)/M are determined from serial dilutions in a microplate. Detection of as little as 6.7 fmol HRP is achieved using antibodies immobilized on the silver ion-modified microplates. Active antibody surface densities were estimated to be between 130 and 260 nm2/antibody molecule. Background binding of HRP to the modified silver ion microplates was very low, allowing for reasonably accurate detection between 10(-14) and 10(-11) mol HRP.     

End-labeling of long DNA fragments with biotin and detection of DNA immobilized on magnetic beads

To immobilize DNA fragments onto magnetic beads coated with streptavidin for isolation purpose, it is important to label one biotin molecule at one terminus of DNA fragment. After failure to label long DNA with biotin by PCR and filling-in reaction, a 9.2 kb DNA was labeled with biotin by a modified ligation strategy. A simple method is also reported to detect the quantity and integrity of DNA immobilized on the magnetic beads.     

Detection of IgA defects in blood donors using an enzyme immunoassay

An enzyme immunoassay is presented for screening blood donors for IgA-defects using horseradish peroxidase conjugated IgA. Fife of about 4,700 screened donors was found to be IgA-deficient. With another EIA using horseradish peroxidase conjugated monoclonal anti-IgA and IgA coated microplates the IgA-concentration in serum of these selected donors was determined.     

DNA-Directed immobilization: efficient, reversible, and site-selective surface binding of proteins by means of covalent DNA-streptavidin conjugates

Covalent DNA-streptavidin conjugates have been utilized for the reversible and site-selective immobilization of various biotinylated enzymes and antibodies by DNA-directed immobilization (DDI). Biotinylated alkaline phosphatase, beta-galactosidase, and horseradish peroxidase as well as biotinylated anti-mouse and anti-rabbit immunoglobulins have been coupled to the DNA-streptavidin adapters by simple, two-component incubation and the resulting preconjugates were allowed to hybridize to complementary, surface-bound capture oligonucleotides. Quantitative measurements on microplates indicate that DDI proceeds with a higher immobilization efficiency than conventional immobilization techniques, such as the binding of the biotinylated proteins to streptavidin-coated surfaces or direct physisorption. These findings can be attributed to the reversible formation of the rigid, double-stranded DNA spacer between the surface and the proteins. Moreover, BIAcore measurements demonstrate that DDI allows a reversible functionalization of sensor surfaces with reproducible amounts of proteins. Ultimately, the simultaneous immobilization of different compounds using microstructured oligonucleotide arrays as immobilization matrices demonstrate that DDI proceeds with site selectivity due to the unique specificity of Watson-Crick base pairing.     

Determination of matrix metalloproteinase activity using biotinylated gelatin

Matrix metalloproteinases (MMPs) and, specifically, MMP-2 (gelatinase A) and MMP-9 (gelatinase B) are strongly associated with malignant progression and matrix remodeling. These enzymes are a subject of intensive studies involving screening of comprehensive chemical libraries of synthetic inhibitors. There is no simple method available for measurement of activity of gelatinases and related MMPs. Here, we report a simple, inexpensive, and highly sensitive assay for MMP activity. The assay performed in a 96-well microtiter plate format employs biotin-labeled gelatin (denatured collagen type I) as a substrate. Following the substrate cleavage, only the proteolytic fragments bearing biotin moieties are captured by streptavidin coated on the plastic surface and the captured fragments with at least two biotin molecules should be revealed by streptavidin conjugated with horseradish peroxidase. The frequency of lysine residues is low in collagen type I relative to the MMP cleavage sequences (PXGX). Accordingly, the majority of the cleavage products must be devoid of biotin or possess only one biotin group. Both of these types of fragments cannot be recognized by the horseradish peroxidase-streptavidin conjugate. Therefore, higher gelatinolytic activity is associated with lower signal in the assay. This 2-h assay allows identification of gelatinolytic activity of MMP-2 in concentrations as low as 0.16 ng/ml. The sensitivity of this ELISA-like assay is comparable to that of gelatin zymography, a method widely used to detect gelatinases. However, in contrast to zymography, the assay directly measures the enzymatic activity of MMP samples. The gelatinolytic activity assay permits efficient analyses and screening of the MMP inhibitor panels and allows quantitation of gelatinolytic activity of various MMPs in solution as well as on cell surfaces.     

Biotin IgM Antibodies in Human Blood: A Previously Unknown Factor Eliciting False Results in Biotinylation-Based Immunoassays

Biotin is an essential vitamin that binds streptavidin or avidin with high affinity and specificity. As biotin is a small molecule that can be linked to proteins without affecting their biological activity, biotinylation is applied widely in biochemical assays. In our laboratory, IgM enzyme immuno assays (EIAs) of μ-capture format have been set up against many viruses, using as antigen biotinylated virus like particles (VLPs) detected by horseradish peroxidase-conjugated streptavidin. We recently encountered one serum sample reacting with the biotinylated VLP but not with the unbiotinylated one, suggesting in human sera the occurrence of biotin-reactive antibodies. In the present study, we search the general population (612 serum samples from adults and 678 from children) for IgM antibodies reactive with biotin and develop an indirect EIA for quantification of their levels and assessment of their seroprevalence. These IgM antibodies were present in 3% adults regardless of age, but were rarely found in children. The adverse effects of the biotin IgM on biotinylation-based immunoassays were assessed, including four inhouse and one commercial virus IgM EIAs, showing that biotin IgM do cause false positivities. The biotin can not bind IgM and streptavidin or avidin simultaneously, suggesting that these biotin-interactive compounds compete for the common binding site. In competitive inhibition assays, the affinities of biotin IgM antibodies ranged from 2.1×10(-3) to 1.7×10(-4 )mol/L. This is the first report on biotin antibodies found in humans, providing new information on biotinylation-based immunoassays as well as new insights into the biomedical effects of vitamins.     

Controlled layer-by-layer immobilization of horseradish peroxidase.

Horseradish peroxidase (HRP) was biotinylated with biotinamidocaproate N-hydroxysuccinimide ester (BcapNHS) in a controlled manner to obtain biotinylated horseradish peroxidase (Bcap-HRP) with two biotin moieties per enzyme molecule. Avidin-mediated immobilization of HRP was achieved by first coupling avidin on carboxy-derivatized polystyrene beads using a carbodiimide, followed by the attachment of the disubstituted biotinylated horseradish peroxidase from one of the two biotin moieties through the avidin-biotin interaction (controlled immobilization). Another layer of avidin can be attached to the second biotin on Bcap-HRP, which can serve as a protein linker with additional Bcap-HRP, leading to a layer-by-layer protein assembly of the enzyme. Horseradish peroxidase was also immobilized directly on carboxy-derivatized polystyrene beads by carbodiimide chemistry (conventional method). The reaction kinetics of the native horseradish peroxidase, immobilized horseradish peroxidase (conventional method), controlled immobilized biotinylated horseradish peroxidase on avidin-coated beads, and biotinylated horseradish peroxidase crosslinked to avidin-coated polystyrene beads were all compared. It was observed that in solution the biotinylated horseradish peroxidase retained 81% of the unconjugated enzyme's activity. Also, in solution, horseradish peroxidase and Bcap-HRP were inhibited by high concentrations of the substrate hydrogen peroxide. The controlled immobilized horseradish peroxidase could tolerate much higher concentrations of hydrogen peroxide and, thus, it demonstrates reduced substrate inhibition. Because of this, the activity of controlled immobilized horseradish peroxidase was higher than the activity of Bcap-HRP in solution. It is shown that a layer-by-layer assembly of the immobilized enzyme yields HRP of higher activity per unit surface area of the immobilization support compared to conventionally immobilized enzyme.     

抗癌胚抗原单链抗体基因与核心链霉亲和素基因融合在昆虫细胞中的表达

将抗癌胚抗原单链抗体基因与核心链霉亲和素基因融合插入昆虫杆状病毒供体质粒 pFastBacHTa中 ,在粉纹夜蛾Tn 5B1 4细胞中进行表达。SDS PAGE分析结果表明 ,表达产物分子量为 4 1kD左右 ,Western印迹分析结果表明 ,以HRP标记的生物素进行蛋白质印迹在 4 1kD处可见表达条带 ,表明融合蛋白能特异性的与生物素结合 ,放射免疫分析表明重组杆状病毒表达产生的ScFv CS蛋白能特异性结合癌胚抗原     

Recombinant Gaussia luciferase with a reactive cysteine residue for chemical conjugation: Expression, purification and its application for bioluminescent immunoassays

The mutated recombinant Gaussia luciferase (hgGLase) having the hinge sequence with a reactive cysteine residue at the carboxyl terminal region was purified from Escherichia coli cells by nickel-chelate affinity chromatography and hydrophobic chromatography. The biotinylated hgGLase (Biotin-hgGLase) was prepared by chemical conjugation with a maleimide activated biotin and apply to bioluminescent immunoassay. In the streptavidin and biotin complex system using Biotin-hgGLase, the measurable range of α-fetoprotein as a model analyte was 0.02–100 ng/ml with the coefficient of variation between 2.5% and 5.2%. The sensitivity of Biotin-hgGLase was similar to that by using the detection system of aequorin, alkaline phosophatase and horseradish peroxidase as a label enzyme.     

Avidin- or streptavidin-biotin as a highly sensitive method to stain total protein on membranes

A sensitive method for staining proteins after transfer from polyacrylamide gels to nitrocellulose paper is described. Transferred proteins are first derivatized by reaction of the nitrocellulose replica with sulfosuccinimidobiotin and are then reacted sequentially with streptavidin, rabbit anti-streptavidin, and horseradish peroxidase-conjugated goat anti-rabbit IgG antibody. Incubation with the enzyme substrate α-chloronaphthol, produces dark protein bands against a white background. The binding of streptavidin to the proteins is dependent on biotin derivatization as demonstrated by competition with biotinylated bovine serum albumin or 10 nM biotin. The procedure detects less than 5ng of transferred protein in a single band and is thus 5–10 times more sensitive than horseradish peroxidase-conjugated avidin alone. For bovine serum albumin, the method is comparable in sensitivity to silver staining of protein in polyacrylamide gels.     

Lectin--digoxigenin conjugates: a new hapten system for glycoconjugate cytochemistry.

We report the use of a novel hapten system for lectin cytochemistry. Various lectins conjugated to the steroid hapten digoxigenin (DIG) and monospecific anti-digoxigenin antibodies were applied for the light and electron microscopic detection of glycoconjugates in tissue sections. Both IgG and Fab' anti-DIG antibodies were complexed to particles of colloidal gold and compared to commercially available alkaline phosphatase and horseradish peroxidase conjugated Fab' as general second step reagents. The three different markers performed equally well on paraffin sections whereas the gold-labeled antibodies were superior reagents for semithin and ultrathin sections of Lowicryl K4M embedded tissues. In conjunction with the latter marker, no pretreatment to abolish endogenous enzyme activity was necessary. At the light microscope level, gold signal amplification by the photochemical silver reaction was required. DIG, in contrast to biotin, does not occur in animal tissues thus eliminating the need for blocking reactions prior to lectin incubation. Compared to affinity techniques using glycoprotein-gold complexes as second step reagent the DIG hapten system required smaller amounts of lectins. The staining patterns were indistinguishable from those obtained in other lectin-gold techniques and the specificity of the labeling could be demonstrated in sugar inhibition tests.     

Lectin — digoxigenin conjugates: a new hapten system for glycoconjugate cytochemistry

Summary We report the use of a novel hapten system for lectin cytochemistry. Various lectins conjugated to the steroid hapten digoxigenin (DIG) and monospecific anti-digoxigenin antibodies were applied for the light and electron microscopic detection of glycoconjugates in tissue sections. Both IgG and Fab' anti-DIG antibodies were complexed to particles of colloidal gold and compared to commercially available alkaline phosphatase and horseradish peroxidase conjugated Fab' as general second step reagents. The three different markers performed equally well on paraffin sections whereas the gold-labeled antibodies were superior reagents for semithin and ultrathin sections of Lowicryl K4M embedded tissues. In conjunction with the latter marker, no pretreatment to abolish endogenous enzyme activity was necessary. At the light microscope level, gold signal amplification by the photochemical silver reaction was required. DIG, in contrast to biotin, does not occur in animal tissues thus eliminating the need for blocking reactions prior to lectin incubation. Compared to affinity techniques using glycoprotein-gold complexes as second step reagent the DIG hapten system required smaller amounts of lectins. The staining patterns were indistinguishable from those obtained in other lectin-gold techniques and the specificity of the labeling could be demonstrated in sugar inhibition tests.     

Applications of monoclonal antibodies to human follicle-stimulating hormone in enzyme immunoassays

Monoclonal antibodies against human follicle-stimulating hormone (hFSH) were generated by using an improved hybridoma technique with a semisolid medium in methylcellulose for initial cloning. The generated monoclonal antibodies were characterized with respect to their subunit and epitope specificity as well as cross-reactivity to other glycoprotein hormones. Monoclonal antibodies of high affinity and high specificity to hFSH were finally selected for applications in sandwich enzyme immunoassay. The monoclonal antibody specific to the alpha-subunit of FSH was coated on microtiter wells and served as the first antibody. The other high-affinity monoclonal antibody specific to beta-subunit of FSH was labeled with horseradish peroxidase and served as the second antibody. This immunoassay can be performed within 70 min at room temperature and has a minimum sensitivity of 2 mIU/ml for serum sample.     

Novel biosensor system model based on fluorescence quenching by a fluorescent streptavidin and carbazole‐labeled biotin

In the present study, a novel molecular biosensor system model was designed by using a couple of the fluorescent unnatural mutant streptavidin and the carbazole‐labeled biotin. BODIPY‐FL‐aminophenylalanine (BFLAF), a fluorescent unnatural amino acid was position‐specifically incorporated into Trp120 position of streptavidin by four‐base codon method. On the other hand, carbazole‐labeled biotin was synthesized as a quencher for the fluorescent Trp120BFLAF mutant streptavidin. The fluorescence of fluorescent Trp120BFLAF mutant streptavidin was decreased as we expected when carbazole‐labeled biotin was added into the mutant streptavidin solution. Furthermore, the fluorescence decrease of Trp120BFLAF mutant streptavidin with carbazole‐labeled biotin (100 nM) was recovered by the competitive addition of natural biotin. This result demonstrated that by measuring the fluorescence quenching and recovery, a couple of the fluorescent Trp120BFLAF mutant streptavidin and the carbazole‐labeled biotin were successfully applicable for quantification of free biotin as a molecular biosensor system. Copyright © 2016 John Wiley & Sons, Ltd.     

Easily reversible desthiobiotin binding to streptavidin,avidin, and other biotin-binding proteins: uses for protein labeling,detection, and isolation

The high-affinity binding of biotin to avidin, streptavidin, and related proteins has been exploited for decades. However, a disadvantage of the biotin/biotin-binding protein interaction is that it is essentially irreversible under physiological conditions. Desthiobiotin is a biotin analogue that binds less tightly to biotin-binding proteins and is easily displaced by biotin. We synthesized an amine-reactive desthiobiotin derivative for labeling proteins and a desthiobiotin-agarose affinity matrix. Conjugates labeled with desthiobiotin are equivalent to their biotinylated counterparts in cell-staining and antigen-labeling applications. They also bind to streptavidin and other biotin-binding protein-based affinity columns and are recognized by anti-biotin antibodies. Fluorescent streptavidin conjugates saturated with desthiobiotin, but not biotin, bind to a cell-bound biotinylated target without further processing. Streptavidin-based ligands can be gently stripped from desthiobiotin-labeled targets with buffered biotin solutions. Thus, repeated probing with fluorescent streptavidin conjugates followed by enzyme-based detection is possible. In all applications, the desthiobiotin/biotin-binding protein complex is easily dissociated under physiological conditions by either biotin or desthiobiotin. Thus, our desthiobiotin-based reagents and techniques provide some distinct advantages over traditional 2-iminobiotin, monomeric avidin, or other affinity-based techniques.     

Screening of monoclonal antibodies using antigens labeled with acetylcholinesterase: application to the peripheral proteins of photosystem 1

An original immunoenzymatic screening method, based on the use of antigens labeled with the stable enzyme acetylcholinesterase (AChE, EC 3.1.1.7), is described. The high turnover of this enzyme results in a very sensitive detection of antibodies. In this method, monoclonal antibodies from the supernatants of hybridoma cultures are immobilized on a solid phase coated with anti-mouse immunoglobulins and react simultaneously with the appropriate antigen labeled with biotin molecules. In a second step, biotinylated acetylcholinesterase is in turn associated to the system via avidin interactions and subsequently detected by a colorimetric assay. The method appears more sensitive and easier to use than either the corresponding radioimmunological test using a 125I-iodinated antigen or the same type of enzymatic immunoassay performed with biotinylated horseradish peroxidase instead of biotinylated AChE. The combined use of microtiter plates, solid-phase separation, and colorimetric detection allows a high level of automation of the method which makes it very efficient to process a large number of samples. This technique has been successfully applied to the screening of monoclonal antibodies directed against peripheral proteins of the photosystem 1 (PS1) membrane complex in photosynthesis. A complete set of antibodies recognizing these PS1 components was selected. The same technique was also tested in competition immunoassays and appears to be a very precise and useful tool for quantifying PS1 polypeptides in different biological extracts, including sodium dodecyl sulfate-denatured membranes. This can be of special interest for studying the biogenesis of membrane complexes.     

A non-covalent method of attaching antibodies to liposomes

A novel non-covalent method of attaching antibodies to liposomes which exploits the high affinity of streptavidin for biotin, is described. The two-step coupling protocol involves the initial attachment of streptavidin to liposomes containing biotin PE, followed by the coupling of biotinated antibodies to streptavidin-liposomes. The association of streptavidin with liposomes containing biotinated PE is rapid (less than 5 min), resulting in a maximum association of 40 molecules of streptavidin per 100 nm vesicle. In the presence of equimolar cholesterol, the amount of streptavidin bound is twice that observed when biotin PE/egg PC liposomes are used. Irrespective of the mole ratio of biotin to antibody (e.g. for 1-6 biotins per antibody), or the molar ratio of antibody to streptavidin in the second incubation step, equimolar amounts of antibody bind to streptavidin. It is shown that anti-rat-erythrocyte IgG or F(ab')2 complexed to liposomes via the streptavidin linker bind specifically to rat erythrocytes but not to human erythrocytes. This coupling protocol can be readily extended to other biotinated antibodies.     

The use of biotin-streptavidin systems for enhancing the parameters of immunometric analysis

The possibility of improving analytical parameters of the immunometric assay with the use of biotinylated antibodies and biotin-streptavidin complexes in comparison with the commonly known approach of direct antibody modification with 125I has been studied. Experiments have been carried out with the use of low-affinity antibodies (Kass approximately 10(9) M-1) to ferritin. The signal-to-noise ratio in the immunometric increases 2.3 times when streptavidin labeled with horse-radish peroxidase is used and 4.3 times when the preformed streptavidin + biotin-peroxidase complex is used in comparison with assay systems based on 125I-labeled antibodies. The improvement of assay parameters of immunochemical systems by means of biotin-streptavidin complexes has been found to permit the use of low-affinity antibodies as assay reagents, thus ensuring analytical parameters attaining or close to those of immunoradiometric assay systems based on high-affinity 125I-labeled antibodies (Kass approximately 10(10) M-1). As shown in this study, the following factors ensure the signal enhancement in biotin-streptoavidin systems: (a) the biotin modification of several lysin residues per IgG molecule, the optimum extent of modification being 3-4 residues per molecule; (b) mild procedure for biotinylation. In contrast to oxidative iodination, the modification of NH2 groups with biotin esters does not significantly affect their antigen-binding properties.     

Direct monitoring of molecular recognition processes using fluorescence enhancement at colloid-coated microplates

Direct monitoring of recognition processes at the molecular level is a valuable tool for studying reaction kinetics to assess affinity constants (e.g. drugs to receptors) and for designing rapid single step immunoassays. Methods currently used to gain information about binding processes predominantly depend on surface plasmon resonance. These systems use excitation with coherent light in attenuated total reflection geometry to obtain discrimination between surface-bound and free molecules in solution. Therefore labeling of the compounds is not necessary, but due to the complexity of the measuring setup the method is rather costly. In this contribution we present a simple method for performing kinetic single step biorecognition assays with fluorophore labeled compounds using the fluorescence enhancement properties of surface bound silver colloids. Silver colloids are bound to standard microplates via silanization of the plastic surface. Fluorophores close to this colloid coated surface show a significant gain in fluorescence compared to fluorophores farther away in the bulk solution. Therefore discrimination between surface bound and free fluorophores is possible and the binding of, for example, fluorophore labeled antibodies to antigens immobilized on the colloid surface results in increasing fluorescence intensity. Utilization of standard microplates makes this method fully compatible with conventional microplate processing and reading devices. Neither excitation with coherent laser light nor ATR geometry is required, the measurement is performed in a standard fluorescence microplate reader in front face geometry with a xenon flash lamp as excitation source. Methods for the preparation of colloid-coated microplates and fluorescence-enhanced biorecognition assays are presented. Additionally the dependence of the system performance on the structure and properties of the metal colloid coated surface is described. A two-component biorecognition model system shows a detection limit in the subnanomolar range. The ease of colloid-surface preparation and the high sensitivity makes fluorescence enhancement at colloid-coated microplates a valuable tool for studying reaction kinetics and performing rapid single-step immunoassays.     

A modified rapid enzyme immunoassay for the detection of rabies and rabies-related viruses: RREID-lyssa.

This paper presents a modification of the previously described Rapid Rabies Enzyme Immuno-Diagnosis test (RREID) by using biotinylated antibodies, streptavidin conjugate and a mixture of monospecific polyclonal antibodies against several lyssaviruses. In the modified technique (RREID-lyssa), microplates were sensitized with a mixture of purified antibodies against ribonucleoprotein (RNP) from Pasteur virus (Lyssavirus serotype 1), European Bat Lyssavirus (EBL, unclassified) and Mokola virus (Lyssavirus serotype 3). Bound RNP was detected by the same antibodies labelled with biotin and peroxidase-strepavidin conjugate. These techniques were used for the detection of RNP of different Lyssavirus serotypes (rabies and rabies-related viruses). For lyssavirus specimens of serotype 1, the threshold of detection of RREID and RREID-lyssa were similar. However, a smaller amount of labelled antibodies was needed when biotinylated antibodies were used. For specimens infected by rabies-related strains (serotypes 2, 3, 4 and EBL), the threshold of detection of the RREID-lyssa was between two and 512 times lower than with the RREID. The sensitivity and the specificity of the RREID-lyssa for rabies virus (serotype 1) when tested on a small field trial (53 specimens) were found to be identical to the RREID. Consequently, RREID-lyssa can be a useful tool for diagnostic laboratories that receive specimens infected by rabies-related viruses.