Hemodynamic effects of red blood cell aggregation

The influence of red blood cell (RBC) aggregation on blood flow in vivo has been under debate since early 1900's, yet a full understanding has still has not been reached. Enhanced RBC aggregation is well known to increase blood viscosity measured in rotational viscometers. However, it has been demonstrated that RBC aggregation may decrease flow resistance in cylindrical tubes, due to the formation of a cell-poor zone near the tube wall which results from the enhanced central accumulation of RBC. There is also extensive discussion regarding the effects of RBC aggregation on in vivo blood flow resistance. Several groups have reported increased microcirculatory flow resistance with enhanced RBC aggregation in experiments that utilized intravital microscopy. Alternatively, whole organ studies revealed that flow resistance may be significantly decreased if RBC aggregation is enhanced. Recently, new techniques have been developed to achieve well-controlled, graded alterations in RBC aggregation without influencing suspending phase properties. Studies using this technique revealed that the effects of RBC aggregation are determined by the degree of aggregation changes, and that this relationship can be explained by different hemodynamic mechanisms.     

Depletion-mediated red blood cell aggregation in polymer solutions

Polymer-induced red blood cell (RBC) aggregation is of current basic science and clinical interest, and a depletion-mediated model for this phenomenon has been suggested; to date, however, analytical approaches to this model are lacking. An approach is thus described for calculating the interaction energy between RBC in polymer solutions. The model combines electrostatic repulsion due to RBC surface charge with osmotic attractive forces due to polymer depletion near the RBC surface. The effects of polymer concentration and polymer physicochemical properties on depletion layer thickness and on polymer penetration into the RBC glycocalyx are considered for 40 to 500 kDa dextran and for 18 to 35 kDa poly (ethylene glycol). The calculated results are in excellent agreement with literature data for cell-cell affinities and with RBC aggregation-polymer concentration relations. These findings thus lend strong support to depletion interactions as the basis for polymer-induced RBC aggregation and suggest the usefulness of this approach for exploring interactions between macromolecules and the RBC glycocalyx.     

The mechanism of the dextran-induced red blood cell aggregation

In order to clarify the mechanism of dextran-induced aggregation, the effect of the ionic strength (I) on the minimal shear stress (tau(c)) required to rupture RBC doublets was studied for suspensions with the external media containing 76 and 298 kDa dextrans. At low and high ionic strengths, tau(c) increases with increasing I, whereas at intermediate I values, tau(c) versus I dependencies reveal a plateau step. The non-monotonous shape of these curves disagrees with the depletion model of RBC aggregation and is consistent with the predictions of the bridging mechanism. Literature reports point out that elastic behavior of dextran molecules in low and high I regions is fairly typical of Hookean springs and hence predict an increase in tau(c) with increasing I. A plateau step is accounted for by the enthalpic component of the dextran elasticity due to the shear-induced chair-boat transition of the dextran's glucopyranose rings. A longer plateau step for suspensions with a higher molecular weight dextran is explained by a larger contribution of the enthalpic component to the dextran elasticity. Thus, the results reported in this study provide evidence that RBC aggregation is caused by the formation of dextran bridges between the cells.     

Influence of cell-specific factors on red blood cell aggregation

The reversible aggregation of red blood cells (RBC) into linear and three-dimensional structures continues to be of basic science and clinical interest: RBC aggregation affects low shear blood viscosity and microvascular flow dynamics, and can be markedly enhanced in several clinical states. Until fairly recently, most research efforts were focused on relations between suspending medium composition (i.e., protein levels, polymer type and concentration) and aggregate formation. However, there is now an increasing amount of experimental evidence indicating that RBC cellular properties can markedly affect aggregation, with the term "RBC aggregability" coined to describe the cell's intrinsic tendency to aggregate. Variations of aggregability can be large, with some changes of aggregation substantially greater than those resulting from pathologic states. The present review provides a brief overview of this topic, and includes such areas as donor-to-donor variations, polymer-plasma correlations, effects of RBC age, effects of enzymatic treatment, and current developments related to the mechanisms involved in RBC aggregation.     

Temperature-dependent threshold shear stress of red blood cell aggregation

Red blood cell (RBC) aggregation is becoming an important hemorheological parameter, which exhibits a unique temperature dependence. However, further investigation is still required for understanding the temperature-dependent characteristics of hemorheology that includes RBC aggregation. In the present study, blood samples were examined at 3, 10, 20, 30, and 37 °C. When the temperature decreases, the whole-blood and plasma viscosities increase, whereas the aggregation indices (AI, M, and b) yield contrary results. Since these contradictory results are known to arise from an increase in the plasma viscosity as the temperature decreases, aggregation indices that were corrected for plasma viscosity were examined. The corrected indices showed mixed results with the variation of the temperature. However, the threshold shear rate and the threshold shear stress increased as the temperature decreased, which is a trend that agrees with that of the blood viscosity. As the temperature decreases, RBC aggregates become more resistant to hydrodynamic dispersion and the corresponding threshold shear stress increases as does the blood viscosity. Therefore, the threshold shear stress may help to better clarify the mechanics of RBC aggregation under both physiological and pathological conditions.     

Rheological effects of red blood cell aggregation in the venous network: a review of recent studies

It has long been recognized that understanding the rheological properties of blood is essential to a full understanding of the function of the circulatory system. Given the difficulty of obtaining carefully controlled measurements in vivo, most of our current concepts of the flow behavior of blood in vivo are based on its properties in vitro. Studies of blood rheology in rotational and tube viscometers have defined the basic properties of blood and pointed to certain features that may be especially significant for understanding in vivo function. At the same time, differences between in vivo and in vitro systems combined with the complex rheological properties of blood make it difficult to predict in vivo blood rheology from in vitro studies. We have investigated certain flow properties of blood in vivo, using the venular network of skeletal muscle as our model system. In the presence of red blood cell aggregation, venous velocity profiles become blunted from the parabolic as in Poiseuille flow, as pseudo-shear rate (= mean fluid velocity/vessel diameter) is decreased from approximately 100 s(-1) to 5 s(-1). At control flow rates, the short distance between venular junctions does not appear to permit significant axial migration and red cell depletion of the peripheral fluid layer before additional red cells and aggregates are infused from a feeding tributary. Formation of a cell-free plasma layer at the vessel wall and sedimentation in vivo are evident only at very low pseudo-shear rates (<5 s(-1)). These findings may explain in large part observations in whole organs of increased venous resistance with reduction of blood flow.     

Monitoring red blood cell aggregation with nuclear magnetic resonance

We present a new application of nuclear magnetic resonance to monitor rouleaux formation in static blood suspensions of physiological hematocrit. The method measures the apparent mean residence time of water inside the rouleaux and yields the kinetics and the extent of red cell aggregation in units of cells per aggregate.     

Evaluation of a method to assess red blood cell aggregation

Reversible aggregation of red blood cells (RBC) plays an important role in determining the flow properties of blood. To study different factors affecting RBC aggregation we used a new commercially available erythro-aggregameter (SEFAM, Nancy, France). The method allows the photometric quantitation of the kinetics of RBC aggregation and the estimation of the shear resistance of the aggregates. Modification of the hematocrit acts mostly on the determination of the disaggregation shear rate, while plasma composition strongly affects all measurements. Anticoagulants per se do no influence the aggregation process, but can alter the value of the parameters through a plasma dilution effect. Presence of white blood cells and platelets in the sample did not modify the data. Study on the effects of low concentration of heparin and low molecular weight heparin showed that at therapeutical doses these drugs did not alter the values of the aggregation parameters. Provided that precise guidelines are followed for the processing of blood samples, this method may serve to investigate RBC aggregation in various diseases and to search for adequate hemorheologic treatment.     

Plasmodium falciparum: red blood cell binding studies using peptides derived from rhoptry-associated protein 2 (RAP2)

Plasmodium falciparum rhoptry-associated proteins 1 (RAP1) and 2 (RAP2) are antigens presenting themselves as candidates for a subunit malaria vaccine. RAP2 protein, non-overlapping, consecutive peptides were synthesised and tested in red blood cell (RBC) binding assays to identify their receptor-ligand interaction in recognising RAP2 regions involved in the in vitro merozoite invasion process. Four high activity binding peptides (HABPs) were identified in the resulting 20 peptides. Peptides 26220 ((61)NHFSSADELIKYLEKTNINT(80)), 26225 ((161)IKKNPFLRVLNKASTTTHAT(180)) and 26229 ((241)RSVNNVISKNKTLGLRKRSS(260)) were located in the amino terminal and central part of the protein and HABP 26235 ((361)FLAEDFVELFDVTMDCYSRQ(380)) was located at the carboxy terminal. All these HABPs showed saturable binding and presented dissociation constants between 500 and 950 nM; the number of binding sites per RBC ranged from 48,000 to 160,000. High binding peptides' critical amino acids involved in RBC binding were determined by competition binding assays; their amino acids appear in bold in the sequences shown above. SDS-PAGE results showed that peptides 26220, 26225 and 26229 had at least two different sets of 62 and 42 kDa HABP receptors on RBCs and that peptide 26235 had at least two different sets of 77 and 62 kDa. HABPs inhibited in vitro merozoite invasion by between 54% and 94% at 200 microM, suggesting that these RAP2 peptides are involved in the in vitro P. falciparum invasion process.     

Effects of dextran molecular weight on red blood cell aggregation

The reversible aggregation of human red blood cells (RBC) by proteins or polymers continues to be of biologic and biophysical interest, yet the mechanistic details governing the process are still being explored. Although a depletion model with osmotic attractive forces due to polymer depletion near the RBC surface has been proposed for aggregation by the neutral polyglucose dextran, its applicability at high molecular mass has not been established. In this study, RBC aggregation was measured over a wide range of dextran molecular mass (70 kDa to 28 MDa) at concentrations ≤2 g/dL. Our results indicate that aggregation does not monotonically increase with polymer size; instead, it demonstrates an optimum dextran molecular mass around 200-500 kDa. We used a model for depletion-mediated RBC aggregation to calculate the expected depletion energies. This model was found to be consistent with the experimental results and thus provides new insight into polymer-RBC interactions.     

Inhibition of polymer-induced red blood cell aggregation by poloxamer 188

Previous reports have suggested that non-ionic poloxamer surfactants of appropriate molecular mass and composition can reduce red blood cell (RBC) aggregation in whole blood and in RBC-plasma suspensions. We have thus evaluated this phenomenon for RBC aggregated by several water-soluble polymers, using poloxamer 188 (P188), a non-ionic, tri-block molecule (total molecular mass of 8.40 kDa, 80% polyoxyethylene). Human RBC were washed, then re-suspended in isotonic solutions of dextran 70 (70.3 kDa), dextran 500 (476 kDa), PVP (360 kDa) or P-L-GLU (61.2 kDa); density-separated RBC were also studied. RBC aggregation was quantitated via a computerized Myrenne Aggregometer (extent, strength) and by the Microscopic Aggregation Index (MAI) method. Over the range of 0.5 to 5 mg/ml, poloxamer 188 inhibited both the extent and strength of aggregation in a dose-dependent manner, with the magnitude of the decrease related to polymer type (e.g., at 5 mg/ml, 62% decrease for dextran 70 vs. 14% decrease for P-L-GLU); MAI results with dextran 70 also showed a dose-dependent decrease. Poloxamer 188 at 5 mg/ml was more effective with younger, less-dense cells. Based upon the depletion model for polymer-induced aggregation, these findings suggest that poloxamer 188 acts by penetrating the depletion layer near the glycocalyx, thereby reducing the osmotic gradient between the intercellular gap and the suspending medium. Regardless of the specific mechanism(s) of action, poloxamers appear to offer interesting approaches for future basic science and clinical studies, and thus the possibility for greater insight into RBC aggregation.     

Membrane properties and aggregation of human red blood cells after endotoxin treatment in vitro

Endotoxin treatment of blood in vitro (10(-11) mg/RBC, 30 min at 30 degrees C) leads to a significant increase of the membrane elastic shear modulus mu and membrane viscosities as well as of the aggregation index AI and of the velocity of doublet formation.     

Roles of surface electrochemistry and macromolecular adsorption in heparin-induced red blood cell aggregation

Red blood cell (RBC) aggregation in heparin-saline solution was quantified by microscopic observation. The adsorption isotherms of heparin onto normal and neuraminidase-treated RBC surfaces were determined by radioactive heparin labeled with 125I-Bolton-Hunter Reagent. RBC aggregation by heparin requires the presence of sialic acids at cell surface and was enhanced by reduction of ionic strength of the suspending medium. Adsorption of heparin onto RBC surface was increased by removal of sialic acids. These findings not only serve to elucidate the basic mechanism of cell-cell interaction mediated by negatively charged macromolecules, but also provide experimental evidence for the possible conformational change of macromolecules at the charged surface.