Defining residues involved in human rhinovirus 2A proteinase substrate recognition

The 2A proteinase (2A(pro)) of human rhinoviruses (HRVs) initiates proteolytic processing by cleaving between the C-terminus of VP1 and its own N-terminus. It subsequently cleaves the host protein eIF4GI. HRV2 and HRV14 2A(pro) cleave at IITTA *GPSD and DIKSY *GLGP on their respective polyproteins. The HRV2 2A(pro) cleavage site on eIF4GI is TLSTR *GPPR. We show that HRV2 2A(pro) can self-process at the eIF4GI cleavage sequence whereas HRV14 2A(pro) cannot, due to the presence of the arginine residue at P1. The mutations A104C or A104S in HRV14 2A(pro) restored cleavage when arginine was present at P1, although not to wild-type levels. These experiments define residues which determine substrate recognition in rhinoviral 2A(pro).     

Role for the P4 amino acid residue in substrate utilization by the poliovirus 3CD proteinase.

Amino acid insertions or substitutions were introduced into the poliovirus P1 capsid precursor at locations proximal to the two known Q-G cleavage sites to examine the role of the P4 residue in substrate processing by proteinase 3CD. Analysis of the processing profile of P1 precursors containing four-amino-acid insertions into the carboxy terminus of VP3 or a single-amino-acid substitution at the P4 position of the VP3-VP1 cleavage site demonstrates that substitution of the alanine residue in the P4 position of the VP3-VP1 cleavage site significantly affects cleavage at that site by proteinase 3CD. A single-amino-acid substitution at the P4 position of the VP0-VP3 cleavage site, on the other hand, has only a slight effect on 3CD-mediated processing at this cleavage site. Finally, analysis of six amino acid insertion mutations containing Q-G amino acid pairs demonstrates that the in vitro and in vivo selection of a cleavage site from two adjacent Q-G amino acid pairs depends on the presence of an alanine in the P4 position of the cleaved site. Our data provide genetic and biochemical evidence that the alanine residue in the P4 position of the VP3-VP1 cleavage site is a required substrate determinant for the recognition and cleavage of that site by proteinase 3CD and suggest that the P4 alanine residue may be specifically recognized by proteinase 3CD.     

Limited expression of poliovirus by vaccinia virus recombinants due to inhibition of the vector by proteinase 2A.

A recombinant vaccinia virus was constructed that expressed poliovirus coat precursor protein P1 fused to about two-thirds of the 2A proteinase. The truncated 2A segment could be cleaved away from the P1 region by coinfecting with poliovirus type 1, 2, or 3 or with human rhinovirus 14 but not with encephalomyocarditis virus. Further cleavage of the vector-derived P1 to yield mature poliovirus capsid proteins was not observed. Attempts to isolate vaccinia virus recombinants containing portions of the poliovirus genome that encompassed the complete gene for proteinase 2A were unsuccessful, unless expression of functional 2A was abolished by insertion of a frameshift mutation. We conclude that an activity of the 2A proteinase, probably its role in translational inhibition, prevented isolation of vaccinia virus recombinants that expressed 2A.     

Novel recognition sequence of coxsackievirus 2A proteinase

Coxsackievirus B1 (CVB1) 2A proteinase (2A(pro)) is a cysteine proteinase that cleaves the viral monocistronic polyprotein between the C-terminus of the VP1 region and the N-terminus of the 2A region, and also shuts off translational initiation in host cells by cleavage of eukaryotic initiation factor 4G (eIF4G) isoforms. We expressed in Escherichia coli a series of fusions in which various C-terminal fragments of VP1 were linked to the N-terminus of 2A(pro), and we also employed site-directed mutagenesis to introduce mutations of several amino acid residues. Our results showed that the presence of the C-terminal three amino acid residues of VP1 at the N-terminus of 2A(pro) is sufficient for specific self-cleavage between VP1 and 2A(pro) to generate mature 2A(pro), but the P4 amino acid also plays an important role. We further found that 2A(pro) cleaves the amino acid sequence Leu-Val-Pro-Arg-( *)Gly-Ser (LVPRGS motif), which is the target sequence of thrombin.     

A poliovirus minireplicon containing an inactive 2A proteinase is expressed in vaccinia virus-infected cells.

It has been difficult to evaluate the role of individual viral proteins in poliovirus replication because a suitable complementation system has not yet been developed. To approach this problem, we constructed a chimeric human immunodeficiency virus type 2 (HIV-2)-gag-poliovirus minireplicon in which regions of the gag gene of HIV-2 were inserted in the poliovirus genome between nucleotides 1174 and 2470. Transfection of this chimeric RNA into HeLa cells results in the replication of the minireplicon and expression of an HIV-2-gag-P1 fusion protein which can be immunoprecipitated with antibodies to HIV-2-gag. Expression of the HIV-2-gag-P1 fusion protein was dependent on replication of the chimeric RNA genome. Although the chimeric HIV-2-gag-poliovirus RNA genome replicated in poliovirus-infected cells, transfection of the chimeric HIV-2-gag-poliovirus genome into vaccinia virus-infected cells resulted in increased replication as measured by analysis of chimeric RNA. The increase in replication correlated with an increase in the expression of the HIV-2-gag-P1 fusion protein in vaccinia virus-infected cells. To characterize this system, we constructed a mutation in the 2A gene to change a cysteine at amino acid 109 to a serine. Expression of the HIV-2-gag-P1 fusion protein was not detected when the HIV-2-gag-poliovirus genome containing the 2A mutation was transfected into HeLa cells, demonstrating the mutation was lethal for replication. When the chimeric genome was transfected into poliovirus-infected cells, no RNA replication or expression of the HIV-2-gag-P1 fusion protein was observed. In contrast, transfection of this genome into vaccinia virus-infected cells resulted in replication of the chimeric RNA and expression of two proteins with larger molecular masses than the HIV-2-gag-P1 proteins, possibly representing HIV-2-gag-P1-2A and HIV-2-gag-P1-2ABC fusion proteins. The transfection of the chimeric HIV-2-gag-poliovirus genome containing the 2A mutation into poliovirus-vaccinia virus coinfected cells resulted in the expression and partial processing of the two larger HIV-2-gag-P1 fusion proteins to give the correct molecular mass for the HIV-2-gag-P1 fusion protein. The 2A mutation was reconstructed back into the full-length infectious cDNA of poliovirus. Transfection of this cDNA into vaccinia virus-infected cells followed by immunoprecipitation with anticapsid antibodies demonstrated the presence of two proteins with molecular masses larger than P1, possibly P1-2A and P1-2ABC fusion proteins.(ABSTRACT TRUNCATED AT 400 WORDS)     

Determinants of the recognition of enteroviral cloverleaf RNA by coxsackievirus B3 proteinase 3C

The initiation of enteroviral positive-strand RNA synthesis requires the presence of a functional ribonucleoprotein complex containing a cloverleaf-like RNA secondary structure at the 5' end of the viral genome. Other components of the ribonucleoprotein complex are the viral 3CD proteinase (the precursor protein of the 3C proteinase and the 3D polymerase), the viral 3AB protein and the cellular poly(rC)-binding protein 2. For a molecular characterization of the RNA-binding properties of the enteroviral proteinase, the 3C proteinase of coxsackievirus B3 (CVB3) was bacterially expressed and purified. The recombinant protein is proteolytically active and forms a stable complex with in vitro-transcribed cloverleaf RNA of CVB3. The formation of stable complexes is also demonstrated with cloverleaf RNA of poliovirus (PV) 1, the first cloverleaf of bovine enterovirus (BEV) 1, and human rhinovirus (HRV) 2 but not with cloverleaf RNA of HRV14 and the second cloverleaf of BEV1. The apparent dissociation constants of the protein:RNA complexes range from approx. 1.7 to 4.6 microM. An electrophoretic mobility shift assay with subdomain D of the CVB3 cloverleaf demonstrates that this RNA is sufficient to bind the CVB3 3C proteinase. Binding assays using mutated versions of CVB3 and HRV14 cloverleaf RNAs suggest that the presence of structural features rather than a defined sequence motif of loop D are important for 3C proteinase-RNA interaction.     

A unique substrate recognition profile for matrix metalloproteinase-2.

The catalytic domains of the matrix metalloproteinases (MMPs) are structurally homologous, raising questions as to the degree of distinction, or overlap, in substrate recognition. The primary objective of the present study was to define the substrate recognition profile of MMP-2, a protease that was historically referred to as gelatinase A. By cleaving a phage peptide library with recombinant MMP-2, four distinct sets of substrates were identified. The first set is structurally related to substrates previously reported for other MMPs. These substrates contain the PXX/X(Hy) consensus motif (where X(Hy) is a hydrophobic residue) and are not generally selective for MMP-2 over the other MMPs tested. Two other groups of substrates were selected from the phage library with similar frequency. Substrates in group II contain the L/IXX/X(Hy) consensus motif. Substrates in group III contain a consensus motif with a sequence of X(Hy)SX/L, and the fourth set of substrates contain the HXX/X(Hy) sequence. Substrates in Group II, III, and IV were found to be 8- to almost 200-fold more selective for MMP-2 over MMP-9. To gain an understanding of the structural basis for substrate selectivity, individual residues within substrates were mutated, revealing that the P(2) residue is a key element in conferring selectivity. These findings indicate that MMP-2 and MMP-9 exhibit different substrate recognition profiles and point to the P(2) subsite as a primary determinant in substrate distinction.     

Hepatitis A virus 3C proteinase substrate specificity.

Hepatitis A virus (HAV) 3C proteinase is responsible for processing the viral precursor polyprotein into mature proteins. The substrate specificity of recombinant hepatitis A 3C proteinase was investigated using a series of synthetic peptides representing putative polyprotein junction sequences. Two peptides, corresponding to the viral polyprotein 2B/2C and 2C/3A junctions, were determined to be cleaved most efficiently by the viral 3C proteinase. The kcat/Km values determined for the hydrolysis of a further series of 2B/2C peptides, in which C-terminal and N-terminal amino acids were systematically removed, revealed that P4 through P2' amino acids were necessary for efficient substrate cleavage. The substitution of Ala for amino acids in P1 and P4 positions decreased the rate of peptide hydrolysis by 100- and 10-fold, respectively, indicating that the side chains of Gln in P1 and Leu in P4 are important determinants of substrate specificity. Rates of hydrolysis measured for other P1- and P4-substituted peptides indicate that S1 is very specific for the Gln side chain whereas S4 requires only that the amino acid in P4 be hydrophobic. A continuous fluorescence quench assay was developed, allowing the determination of kcat/Km dependence on pH. The pH rate profile suggests that catalyzed peptide hydrolysis is dependent on deprotonation of a reactive group having a pKa of 6.2 (+/- 0.2). The results of tests with several proteinase inhibitors indicate that this cysteine proteinase, like other picornaviral 3C proteinases, is not a member of the papain family.     

Cleavage of synthetic peptides by purified poliovirus 3C proteinase

Synthetic peptides, 14-16 residues in length, were used as substrates for purified recombinant poliovirus proteinase 3C. The sequences of the substrates correspond to the sequences of authentic cleavage sites in the poliovirus polyprotein, all of which contain Gln-Gly at the scissile bond. Specificity of cleavages was demonstrated by analysis of 3C digests of synthetic peptides. Relative rate constants for the cleavages were derived by competition experiments. The rate constants roughly correlated with the estimated half-life of the homologous precursor proteins detected in poliovirus-infected cells. The peptide most resistant to cleavage corresponded to the 3C/3D junction, a site known to be cleaved very slowly by 3C in vivo. Substitution of threonine for alanine in P4 position of this peptide, however, resulted in significant cleavage. This observation supports the hypothesis that the residue in P4 position, in addition to the Gln-Gly in P1 and P1', respectively, contributes to substrate recognition. Ac-Gln-Gly-NH2 was not a substrate for 3C.     

Determinants of proteasome recognition of ornithine decarboxylase,a ubiquitin-independent substrate

Ornithine decarboxylase (ODC) is regulated by its metabolic products through a feedback loop that employs a second protein, antizyme 1 (AZ1). AZ1 accelerates the degradation of ODC by the proteasome. We used purified components to study the structural elements required for proteasomal recognition of this ubiquitin-independent substrate. Our results demonstrate that AZ1 acts on ODC to enhance the association of ODC with the proteasome, not the rate of its processing. Substrate-linked or free polyubiquitin chains compete for AZ1-stimulated degradation of ODC. ODC-AZ1 is therefore recognized by the same element(s) in the proteasome that mediate recognition of polyubiquitin chains. The 37 C-terminal amino acids of ODC harbor an AZ1-modulated recognition determinant. Within the ODC C terminus, three subsites are functionally distinguishable. The five terminal amino acids (ARINV, residues 457-461) collaborate with residue C441 to constitute one recognition element, and AZ1 collaborates with additional constituents of the ODC C terminus to generate a second recognition element.     

A second virus-encoded proteinase involved in proteolytic processing of poliovirus polyprotein

The poliovirus polyprotein is cleaved at three different amino acid pairs. Viral polypeptide 3C is responsible for processing at the most common pair (glutamineglycine). We have found that a cDNA fragment encoding parts of the capsid protein region (P1) and the nonstructural protein region (P2), and including the P1-P2 processing site (tyrosine-glycine), can be expressed in E. coli. The translation product was correctly processed. Disruption of the coding sequence of 2A, a nonstructural polypeptide mapping carboxy-terminal to the tyrosine-glycine cleavage site, by linker mutagenesis or deletion, prevented processing. Deletion of the adjacent polypeptide 2B had no such effect. Antibodies against 2A specifically inhibited processing at the 3C'-3D' processing site (tyrosine-glycine) in vitro. We conclude that poliovirus encodes the second proteinase 2A, which processes the polyprotein at tyrosine-glycine cleavage sites.     

A consensus sequence for substrate hydrolysis by rhinovirus 3C proteinase

Kinetic constants were determined for the hydrolysis of a series of synthetic peptide substrates by recombinant rhinovirus (HRV 14) 3C proteinase. Systematic removal or replacement of individual residues indicated that the minimum sequence required for effective cleavage by the viral cysteine proteinase was P5-Val/Thr-P3-P2-Gln-Gly-Pro.     

Electrostatic reversal of serine proteinase substrate specificity.

Mouse granzyme B is a member of the chymotrypsin family of serine proteinases that has an unusual preference for cleavage of substrates following aspartate residues. We show here that granzyme B can be redesigned by a single amino acid substitution in one wall of the specificity pocket, arginine-226 to glutamate, to hydrolyze preferentially thioester substrates following basic amino acids. Amide substrates, however, were not hydrolyzed by the variant granzyme B. These results show that residue 226 is a primary determinant of granzyme B specificity and imply that additional structural components are required for catalysis of amide bonds. Molecular modeling indicated subtle variation in glutamate-226 orientation depending upon the state of protonation of the gamma-carboxylate, which may account for the secondary specificity of this enzyme for substrates containing phenylalanine. This represents the first example of electrostatic reversal of serine proteinase substrate specificity and suggests that residue 226 is a primary substrate specificity determinant in the granzyme B lineage of serine proteinases.     

Development of synthetic peptide substrates for the poliovirus 3C proteinase.

Picornaviruses, such as polio, translate their entire genome as a single polyprotein which must be proteolytically processed to produce the mature viral proteins. A majority of these cleavages are catalyzed by the virus-encoded cysteine proteinase, 3C. We report here the design and synthesis of a series of oligopeptide substrates, based upon native 3C cleavage sites, for an HPLC assay of poliovirus 3C proteinase activity. A similar series of peptides based upon human rhinovirus 3C cleavage sites was also examined. The enzyme shows a marked preference for those peptides with a proline in the P'2 position. A quenched fluorescent substrate suitable for continuous assay of 3C proteinase activity was also synthesized. Both the HPLC assay and the fluorescence assay were used to evaluate a number of potential 3C proteinase inhibitors.     

Mechanism of substrate recognition by botulinum neurotoxin serotype A

Botulinum neurotoxins (BoNTs) are zinc proteases that cleave SNARE proteins to elicit flaccid paralysis by inhibiting neurotransmitter-carrying vesicle fusion to the plasma membrane of peripheral neurons. Unlike other zinc proteases, BoNTs recognize extended regions of SNAP25 for cleavage; however, the molecular basis for this extended substrate recognition is unclear. Here, we define a multistep mechanism for recognition and cleavage of SNAP25 by BoNT/A. SNAP25 initially binds along the belt region of BoNT/A, which aligns the P5 residue to the S5 pocket at the periphery of the active site. Although the exact order of each step of recognition of SNAP25 by BoNT/A at the active site is not clear, the initial binding could subsequently orient the P4'-residue of SNAP25 to form a salt bridge with the S4'-residue, which opens the active site allowing the P1'-residue access to the S1'-pocket. Subsequent hydrophobic interactions between the P3 residue of SNAP25 and the S3 pocket optimize alignment of the scissile bond for cleavage. This explains how the BoNTs recognize and cleave specific coiled SNARE substrates and provides insight into the development of inhibitors to prevent botulism.     

Determinants for DNA-binding site recognition by the glucocorticoid receptor.

The glucocorticoid receptor binds with high specificity to glucocorticoid response elements, discriminating them from other closely related binding sites. Three amino acids in the recognition alpha-helix of the DNA-binding domain of the receptor are primarily responsible for this specific DNA binding activity. In this study we analyze in detail how these residues determine the specific DNA binding by studying a series of mutant glucocorticoid receptor DNA-binding domains containing all combinations of glucocorticoid and estrogen receptor-specific residues at these positions. Statistical analysis of the results enables us to create models describing the association between amino acids and base pairs. Several strategies appear to be used in accomplishing discrimination between the glucocorticoid and estrogen response elements. Single residues (i.e., Val-443 in the glucocorticoid receptor and Glu-439 in the estrogen receptor) appear to form both positive contacts with specific base pairs in the cognate binding site and negative contacts in the non-cognate site. In the glucocorticoid receptor Ser-440 is pleiotropically negative for all sites tested but the negative effect is stronger for the estrogen response element thus contributing to binding site discrimination. Furthermore, combinations of amino acids appear to act synergistically, most often causing a reduction in binding to non-cognate sites.     

Requirements for substrate recognition by bacterial leader peptidase.

Many secreted and membrane proteins have amino-terminal leader peptides which are essential for their insertion across the membrane bilayer. These precursor proteins, whether from prokaryotic or eukaryotic sources, can be processed to their mature forms in vitro by bacterial leader peptidase. While different leader peptides have shared features, they do not share a unique sequence at the cleavage site. To examine the requirements for substrate recognition by leader peptidase, we have truncated M13 procoat, a membrane protein precursor, from both the amino- and carboxy-terminal ends with specific proteases or chemical cleavage agents. The fragments isolated from these reactions were assayed as substrates for leader peptidase. A 16 amino acid residue peptide which spans the leader peptidase cleavage site is accurately cleaved. Neither the basic amino-terminal region nor most of the hydrophobic central region of the leader peptide are essential for accurate cleavage.     

Site-directed mutagenesis of the putative catalytic triad of poliovirus 3C proteinase.

Based on predictions of the structure of proteinase 3C of poliovirus, mutations have been made at residues that are supposed to constitute the catalytic triad. Wild-type and mutant 3C were expressed in Escherichia coli, purified to homogeneity, and characterized by the ability to cleave a synthetic peptide substrate or an in vitro translated polypeptide consisting of part of the polyprotein of poliovirus. Additionally, the ability of autocatalytic processing of a precursor harboring wild-type or mutant 3C sequences was tested. Single substitutions of the residues His-40, Glu-71, and Cys-147 by Tyr, Gln, and Ser, respectively, resulted in an inactive enzyme. Replacement of Asp-85 by Asn resulted in an enzyme that was as active as wild-type enzyme in trans cleavage assays but whose autoprocessing ability was impaired. Our results are consistent with the proposal that residues His-40, Glu-71, and Cys-147 constitute the catalytic triad of poliovirus 3C proteinase. Furthermore, residue Asp-85 is not required for proper proteolytic activity despite being highly conserved between different picornaviruses. This indicates that Asp-85 might be involved in a different function of 3C.     

Site-specific mutagenesis of cDNA clones expressing a poliovirus proteinase

The cleavage of poliovirus precursor polypeptides occurs at specific amino acid pairs that are recognized by viral proteinases. Most of the polio-specific cleavages occur at glutamine-glycine (Q-G) pairs that are recognized by the viral-encoded proteinase 3C (formerly called P3-7c). In order to carry out a defined molecular genetic study of the enzymatic activity of protein 3C, we have made cDNA clones of the poliovirus genome. The cDNA region corresponding to protein 3C was inserted into an inducible bacterial expression vector. This recombinant plasmid (called pIN-III-C3-7c) utilizes the bacterial lipoprotein promoter to direct the synthesis of a precursor polypeptide that contains the amino acid sequence of protein 3C as well as the amino- and carboxy-terminal Q-G cleavage signals. These signals have been previously shown to allow autocatalytic production of protein 3C in bacteria transformed with plasmid pIN-III-C3-7c. We have taken advantage of the autocatalytic cleavage of 3C in a bacterial expression system to study the effects of site-specific mutagenesis on its proteolytic activity. One mutation that we have introduced into the cDNA region encoding 3C is a single amino acid insertion near the carboxy-terminal Q-G cleavage site. The mutant recombinant plasmid (designated pIN-III-C3-mu 10) directs the synthesis of a bacterial-polio precursor polypeptide that is like the wild-type construct (pIN-III-C3-7c). However, unlike the wild-type precursor, the mutant precursor cannot undergo autocatalytic cleavage to generate the mature proteinase 3C. Rather, the precursor is able to carry out cleavage at the amino-terminal Q-G site but not at the carboxy-terminal site. Thus, we have generated an altered poliovirus proteinase that is still able to carry out at least part of its cleavage activities but is unable to be a suitable substrate for self-cleavage at its carboxy-terminal Q-G pair.