Binding of the purified integron DNA integrase IntI1 to integron- and cassette-associated recombination sites

The site-specific recombinase IntI1, encoded by class 1 integrons, catalyses the integration and excision of gene cassettes by recognizing two classes of sites, the integron-associated attI1 site and the 59-base element (59-be) family of sites that are associated with gene cassettes. IntI1 includes the four conserved amino acids that are characteristic of members of the integrase family, and IntI1 proteins with single amino acid substitutions at each of these positions had substantially reduced catalytic activity, consistent with this classification. IntI1 was purified as a fusion protein and shown to bind to isolated attI1 or 59-be recombination sites. Binding to attI1 was considerably stronger than to a 59-be. Binding adjacent to the recombination cross-over point was not detected. A strong IntI1 binding site within attI1 was localized by both deletion and footprinting analysis to a 14 bp region 24–37 bp to the left of the recombination cross-over point, and this region is known to be critical for recombination in vivo ( Recchia et al ., 1994 ). An imperfect (13/15) direct repeat of this region, located 41–55 bp to the left of the recombination cross-over point, contains a weaker IntI1 binding site. Mutation of the stronger binding site showed that a single base pair change accounted for the difference in the strength of binding.     

Integrons and gene cassettes: hotspots of diversity in bacterial genomes

Integrons are genetic units found in many bacterial species that are defined by their ability to capture small mobile elements called gene cassettes. Cassettes usually contain only one gene, potentially any gene, and an attC recombination site, and thousands of cassettes have been sequenced. A specialized IntI site-specific recombinase encoded by the integron recognizes attC and incorporates cassettes into an attI site located adjacent to the intI gene. Over 100 types of integrons have been found, most in bacterial chromosomes. They can all potentially share the same cassettes and, as recombination between attC in a cassette and an attI can occur repeatedly, an integron can contain from zero to hundreds of cassettes. Cassette arrays that are not located next to an intI gene, or solo cassettes at apparently random sites, are also seen. Hence, integrons contribute to generation of diversity in bacterial, plasmid, and transposon genomes and facilitate extensive sharing of information among bacteria.     

DNA complexes obtained with the integron integrase IntI1 at the attI1 site.

Integrons are genetic elements that are able to capture genes by a site-specific recombination mechanism. Integrons contain a gene coding for a lambda-like integrase that carries out site-specific recombination by interacting with two different target sites; the attI site and the palindromic sequence attC (59 base element). Cassette integrations usually involve the attI site, while cassette excisions use attC . Therefore, the integrase should bind both sites to cleave DNA and perform site-specific recombination reactions. We have used purified maltose-binding protein fused with the integrase (MBP-IntI1) and native IntI1 protein and gel retardation assays with fragments containing the complete and partial attI1 site to show formation of four complexes in this region. Chemical modification of specific nucleotides within the attI1 site was used to investigate their interference with binding of the integrase protein. We attribute IntI1 specific binding to four regions in the attI1 site and a GTTA consensus sequence is found in three of the four regions. Interference by modified guanine and thymine residues in the DNA major groove and adenine residues in the minor groove were observed, indicating that the integrase interacts with both sides of the helix. Binding of IntI1 to attC is also discussed.     

Structure and function of 59-base element recombination sites associated with mobile gene cassettes

The integration of gene cassettes into integrons is effected by site-specific recombination catalysed by an integrase, IntI, encoded by the integron. The cassette-associated recombination sites, 59-base elements, are not highly conserved and vary in length from 57 to 141 bp. They can be identified by their location and the relationship of over 20 bp at their outer ends to consensus sequences that are imperfect inverted repeats of one another. The recombination cross-over occurs close to one end of the 59-base element, within a conserved core site with the consensus sequence GTTAGGC or GTTRRRY. By introducing single-base changes at each of these positions in the aadB 59-base element, bases that are critical for site activity were identified. The recombination cross-over was also localized to a unique position between the adjacent G and T residues. Changes introduced in the conserved AAC of the inverse core site (GCCTAAC or RYYYAAC) located at the opposite end of the 59-base element also reduced site activity but to a lesser extent. Sequences of rare recombinants revealed an alternative position for strand exchange and led to the conclusion that 59-base elements comprise two simple sites, analogous to those recognized by other integrases, with each simple site made up of a pair of inversely oriented IntI binding domains separated by a spacer of 7 or 8 bp. Re-examination of the sequences of all known 59-base elements revealed that this simple site configuration was present at both the left and right ends in all 59-base elements. The identity of bases in the spacer is not required for efficient recombination and the cross-over is located at one end of the spacer, suggesting that during IntI1-mediated recombination only one strand exchange occurs.     

Comparative study of class 1 integron and Vibrio cholerae superintegron integrase activities

Superintegrons (SIs) and multiresistant integrons (MRIs) have two main structural differences: (i) the SI platform is sedentary, while the MRI platform is commonly associated with mobile DNA elements and (ii) the recombination sites (attC) of SI gene cassette clusters are highly homogeneous, while those of MRI cassette arrays are highly variable in length and sequence. In order to determine if the latter difference was correlated with a dissimilarity in the recombination activities, we conducted a comparative study of the integron integrases of the class 1 MRI (IntI1) and the Vibrio cholerae SI (VchIntIA). We developed two assays that allowed us to independently measure the frequencies of cassette deletion and integration at the cognate attI sites. We demonstrated that the range of attC sites efficiently recombined by VchIntIA is narrower than the range of attC sites efficiently recombined by IntI1. Introduction of mutations into the V. cholerae repeats (VCRs), the attC sites of the V. cholerae SI cassettes, allowed us to map positions that affected the VchIntIA and IntI1 activities to different extents. Using a cointegration assay, we established that in E. coli, attI1-x-VCR recombination catalyzed by IntI1 was 2,600-fold more efficient than attIVch-x-VCR recombination catalyzed by VchIntIA. We performed the same experiments in V. cholerae and established that the attIVch-x-VCR recombination catalyzed by VchIntIA was 2,000-fold greater than the recombination measured in E. coli. Taken together, our results indicate that in the V. cholerae SI, the substrate recognition and recombination reactions mediated by VchIntIA might differ from the class 1 MRI paradigm.     

The IntI1 Integron Integrase Preferentially Binds Single-Stranded DNA of the attC Site

IntI1 integrase is a member of the prokaryotic DNA integrase superfamily. It is responsible for mobility of antibiotic resistance cassettes found in integrons. IntI1 protein, as well as IntI1-COOH, a truncated form containing its carboxy-terminal domain, has been purified. Electrophoretic mobility shift assays were carried out to study the ability of IntI1 to bind the integrase primary target sites attI and aadA1 attC. When using double-stranded DNA as a substrate, we observed IntI1 binding to attI but not to attC. IntI1-COOH did not bind either attI or attC, indicating that the N-terminal domain of IntI1 was required for binding to double-stranded attI. On the other hand, when we used single-stranded (ss) DNA substrates, IntI1 bound strongly and specifically to ss attC DNA. Binding was strand specific, since only the bottom DNA strand was bound. Protein IntI1-COOH bound ss attC as well as did the complete integrase, indicating that the ability of the protein to bind ss aadA1 attC was contained in the region between amino acids 109 and 337 of IntI1. Binding to ss attI DNA by the integrase, but not by IntI1-COOH, was also observed and was specific for the attI bottom strand, indicating similar capabilities of IntI1 for binding attI DNA in either double-stranded or ss conformation. Footprinting analysis showed that IntI1 protected at least 40 bases of aadA1 attC against DNase I attack. The protected sequence contained two of the four previously proposed IntI1 DNA binding sites, including the crossover site. Preferential ssDNA binding can be a significant activity of IntI1 integrase, which suggests the utilization of extruded cruciforms in the reaction mechanisms leading to cassette excision and integration.     

Recombination activity of a distinctive integron-gene cassette system associated with Pseudomonas stutzeri populations in soil

Class 1 integrons have strongly influenced the evolution of multiple antibiotic resistance. Diverse integrons have recently been detected directly in a range of natural environments. In order to characterize the properties of these environmental integrons, we sought to isolate organisms containing integrons from soils, which resulted in the isolation of Pseudomonas stutzeri strain Q. Further isolation efforts targeted at this species resulted in recovery of two other strains (P and BAM). 16S rRNA sequences and chromosome mapping showed that these three strains are very closely related clonal variants in a single genomovar of P. stutzeri. Only strains Q and BAM were found to contain an integron and an associated gene cassette array. The intI and attI components of these strains showed 99 and 90% identity, respectively. The structure of these integrons and their associated gene cassettes was similar to that reported previously for other integron classes. The two integrons contained nonoverlapping sets of cassette-associated genes. In contrast, many of the cassette-associated recombination sites in the two integrons were similar and were considered to constitute a distinct subfamily consisting of 59-base element (59-be) recombination sites (the Pseudomonas subfamily). The recombination activity of P. stutzeri integron components was tested in cointegrate assays. IntIPstQ was shown to catalyze site-specific recombination between its cognate attI site and 59-be sites from antibiotic resistance gene cassettes. While IntIPstQ did not efficiently mediate recombination between members of the Pseudomonas 59-be subfamily and other 59-be types, the former sites were functional when they were tested with IntI1. We concluded that integrons present in P. stutzeri possess recombination activity and represent a hot spot for genomic diversity in this species.     

The IntI-like tyrosine recombinase of Shewanella oneidensis is active as an integron integrase

We have found an integron-like integrase gene and an attI site in Shewanella oneidensis as part of a small chromosomal integron. We have cloned this gene and tested the ability of the integrase to excise cassettes from various integrons. Most cassettes flanked by two attC sites are readily excised, while cassettes in the "first" position, with an attI1 or attI3 site on one end, are not excised. An exception is a cassette with attI2 on one end. The attI2 site, from Tn7, has greater similarity to the attI site adjacent to the integrase of S. oneidensis than do attI1 or attI3. We cloned the attI site of S. oneidensis and observed the integration of two different cassettes. We have, therefore, demonstrated the function of this integron-like integrase.     

Efficiency of recombination reactions catalyzed by class 1 integron integrase IntI1

The class 1 integron integrase, IntI1, recognizes two distinct types of recombination sites, attI sites, found in integrons, and members of the 59-be family, found in gene cassettes. The efficiencies of the integrative version of the three possible reactions, i.e., between two 59-be, between attI1 and a 59-be, or between two attI1 sites, were compared. Recombination events involving two attI1 sites were significantly less efficient than the reactions in which a 59-be participated, and the attI1 x 59-be reaction was generally preferred over the 59-be x 59-be reaction. Recombination of attI1 with secondary sites was less efficient than the 59-be x secondary site reaction.     

Integron cassette insertion: a recombination process involving a folded single strand substrate

Integrons play a major role in the dissemination of antibiotic resistance genes among Gram-negative pathogens. Integron gene cassettes form circular intermediates carrying a recombination site, attC, and insert into an integron platform at a second site, attI, in a reaction catalyzed by an integron-specific integrase IntI. The IntI1 integron integrase preferentially binds to the 'bottom strand' of single-stranded attC. We have addressed the insertion mechanism in vivo using a recombination assay exploiting plasmid conjugation to exclusively deliver either the top or bottom strand of different integrase recombination substrates. Recombination of a single-stranded attC site with an attI site was 1000-fold higher for one strand than for the other. Conversely, following conjugative transfer of either attI strand, recombination with attC is highly unfavorable. These results and those obtained using mutations within a putative attC stem-and-loop strongly support a novel integron cassette insertion model in which the single bottom attC strand adopts a folded structure generating a double strand recombination site. Thus, recombination would insert a single strand cassette, which must be subsequently processed.     

Site-specific insertion of genes into integrons: role of the 59-base element and determination of the recombination cross-over point

From examination of published DNA sequences of genes found inserted at a specific site in integrons, all genes are shown to be associated, at their 3' ends, with a short imperfect inverted repeat sequence, a 59-base element or relative of this element. The similarity of the arrangement of gene inserts in the integron and in the Tn7 transposon family is described. A refined consensus for the 59-base element is reported. Members of this family are highly diverged and the relationship of a group of longer elements to the 59-base elements is demonstrated. The ability of 59-base elements of different length and sequence to act as sites for recombination catalysed by the integron-encoded DNA integrase is demonstrated, confirming that elements of this family have a common function. The ability of elements located between gene pairs to act as recombination sites has also been demonstrated. The recombination cross-over point has been localized to the GTT triplet which is conserved in the core sites, GTTRRRY, found at the 3' end of 59-base elements. Recombination at the core site found in inverse orientation at the 5' end of the 59-base elements was not detected, and the sequences responsible for orientation of the recombination event appear to reside within the 59-base element. A model for site-specific insertion of genes into integrons and Tn7-like transposons is proposed. Circular units consisting of a gene associated with a 59-base element are inserted into an ancestral element which contains neither a gene nor a 59-base element.(ABSTRACT TRUNCATED AT 250 WORDS)     

A new in vitro strand transfer assay for monitoring bacterial class 1 integron recombinase IntI1 activity

IntI1 integrase is a tyrosine recombinase involved in the mobility of antibiotic resistance gene cassettes within bacterial class 1 integrons. Recent data have shown that its recombination specifically involves the bottom strand of the attC site, but the exact mechanism of the reaction is still unclear. An efficient in vitro assay is still required to better characterize the biochemical properties of the enzyme. In this report we describe for the first time an in vitro system partially reproducing the activity of a recombinant pure IntI1. This new assay, which constitutes the only available in vitro model of recombination by IntI1, was used to determine whether this enzyme might be the sole bacterial protein required for the recombination process. Results show that IntI1 possesses all the features needed for performing recombination between attI and attC sites. However, differences in the in vitro intermolecular recombination efficiencies were found according to the target sites and were correlated with DNA affinities of the enzyme but not with in vivo data. The differential affinity of the enzyme for each site, its capacity to bind to a single-stranded structure at the attC site and the recombination observed with single-stranded substrates unambiguously confirm that it constitutes an important intermediary in the reaction. Our data strongly suggest that the enzyme possesses all the functions for generating and/or recognizing this structure even in the absence of other cellular factors. Furthermore, the in vitro assay reported here constitutes a powerful tool for the analysis of the recombination steps catalyzed by IntI1, its structure-function studies and the search for specific inhibitors.     

Integron integrase binds to bulged hairpin DNA

Gene cassettes are short, monogenic DNA elements that translocate between integrons through site-specific excision and integration. These events require that an integron-coded tyrosine recombinase forms a reactive complex with two sites, at least one of which belongs to the attC class. An attC site can be divided into two pairs of short repeats flanking a palindromic central region. The nucleotide sequence of attC among different cassettes varies extensively, implying that the site contains a structural recognition determinant with low sequence constraints. Oligonucleotides representing many different sequence modifications in either strand of the site were examined for integrase binding by using an electrophoresis mobility shift assay. The inner repeats, a central triplet and two single-nucleotide asymmetries in the site had the strongest influence on binding strength and strand choice. Our data show that the recombinase binds to a bulged hairpin in attC and that the hairpin distortion due to bulging could define the appropriate orientation of the otherwise symmetrical site. This is consistent with the strong bias for binding of recombinase to the bottom-strand oligonucleotides in vitro. Moreover, it was observed that the mobility-shifted complexes persisted under protein-denaturing assay conditions, indicating that a covalent link is indeed formed between integrase and DNA. Upon substitution of the presumed DNA-attacking residue, Y312, with a phenylalanine, DNA binding remained but there was no covalent linkage.     

Molecular characterization of InJR06, a class 1 integron located in a conjugative plasmid of Salmonella enterica ser. Typhimurium.

The presence of class 1, 2, and 3 integrons was investigated in four pediatric isolates of Salmonella enterica ser. Typhimurium (S. Typhimurium). A class 1 integron was detected in one S. Typhimurium strain, the only one that also showed resistance to various aminoglycoside antibiotics. This integron, called InJR06, and the aminoglycoside resistance determinants were located in pS06, a large (> or = 55 kb) conjugative plasmid. A single mobile cassette (encoding the aminoglycoside adenylyltransferase ANT(3')-Ia) was detected in the variable region of InJR06, while the architecture of the attI1 and attC sites was conserved.     

Integron-encoded IntI integrases preferentially recognize the adjacent cognate attI site in recombination with a 59-be site

Integrons have the capacity to capture small mobile elements known as gene cassettes, and this reaction is catalysed by integron-encoded IntI integrases. IntI integrases form a distinct family within the tyrosine recombinase superfamily and include a characteristic additional domain that is well conserved. Two different IntI enzymes were used to examine their ability to recognize heterologous attI sites in both integration and excision assays. IntI1 and IntI3 are 59% identical and catalyse both integrative and excisive recombination between a cassette-associated 59-be site and the cognate attI1 or attI3 site. Integrative recombination events involving a 59-be and a non-cognate attI site, attI2 and attI3 for IntI1 or attI1 and attI2 for IntI3, were detected extremely rarely. In cassette excision assays, the non-cognate attI3 site was recognized by IntI1, but attI1 was not well recognized by IntI3. The purified IntI1 and IntI3 proteins bound strongly only to their cognate attI site.