Production of d-arabitol by a newly isolated Kodamaea ohmeri

A new yeast, isolated from natural osmophilic sources, produces d-arabitol as the main metabolic product from glucose. According to 18S rRNA analysis, the NH-9 strain belongs to the genus Kodamaea. The optimal culture conditions for inducing production of d-arabitol were 37 °C, neutral pH, 220 rpm shaking, and 5% inoculum. The yeast produced 81.2 ± 0.67 g L⁻¹ d-arabitol from 200 g L⁻¹ d-glucose in 72 h with a yield of 0.406 g g⁻¹ glucose and volumetric productivity Q_\textP Q_{\text{P}} of 1.128 g L⁻¹ h⁻¹. Semi-continuous repeated-batch fermentation was performed in shaker-flasks to enhance the process of d-arabitol production by Kodamaea ohmeri NH-9 from d-glucose. Under repeated-batch culture conditions, the highest volumetric productivity was 1.380 g L⁻¹ h⁻¹.     

1,3-Propanediol production in a two-step process fermentation from renewable feedstock

In this work, the production of 1,3-propanediol from glucose and molasses was studied in a two-step process using two recombinant microorganisms. The first step of the process is the conversion of glucose or other sugar into glycerol by the metabolic engineered Saccharomyces cerevisiae strain HC42 adapted to high (>200 g l⁻¹) glucose concentrations. The second step, carried out in the same bioreactor, was performed by the engineered strain Clostridium acetobutylicum DG1 (pSPD5) that converts glycerol to 1,3-propanediol. This two-step strategy led to a flexible process, resulting in a 1,3-propanediol production and yield that depended on the initial sugar concentration. Below 56.2 g l⁻¹ of sugar concentration, cultivation on molasses or glucose showed no significant differences. However, at higher molasses concentrations, glycerol initially produced by yeast could not be totally converted into 1,3-propanediol by C. acetobutylicum and a lower 1,3-propanediol overall yield was observed. In our hand, the best results were obtained with an initial glucose concentration of 103 g l⁻¹, leading to a final 1,3-propanediol concentration of 25.5 g l⁻¹, a productivity of 0.16 g l⁻¹ h⁻¹ and 1,3-propanediol yields of 0.56 g g⁻¹ glycerol and 0.24 g g⁻¹ sugar, which is the highest value reported for a two-step process. For an initial sugar concentration (from molasses) of 56.2 g l⁻¹, 27.4 g l⁻¹ of glycerol were produced, leading to 14.6 g l⁻¹ of 1.3-propanediol and similar values of productivity, 0.15 g l⁻¹ h⁻¹, and overall yield, 0.26 g g⁻¹ sugar.     

Application of oscillation for efficiency improvement of continuous ethanol fermentation with Saccharomyces cerevisiae under very-high-gravity conditions

Compared with steady state, oscillation in continuous very-high-gravity ethanol fermentation with Saccharomyces cerevisiae improved process productivity, which was thus introduced for the fermentation system composed of a tank fermentor followed by four-stage packed tubular bioreactors. When the very-high-gravity medium containing 280 g l⁻¹ glucose was fed at the dilution rate of 0.04 h⁻¹, the average ethanol of 15.8% (v/v) and residual glucose of 1.5 g l⁻¹ were achieved under the oscillatory state, with an average ethanol productivity of 2.14 g h⁻¹ l⁻¹. By contrast, only 14.8% (v/v) ethanol was achieved under the steady state at the same dilution rate, and the residual glucose was as high as 17.1 g l⁻¹, with an ethanol productivity of 2.00 g h⁻¹ l⁻¹, indicating a 7% improvement under the oscillatory state. When the fermentation system was operated under the steady state at the dilution rate of 0.027 h⁻¹ to extend the average fermentation time to 88 h from 59 h, the ethanol concentration increased slightly to 15.4% (v/v) and residual glucose decreased to 7.3 g l⁻¹, correspondingly, but the ethanol productivity was decreased drastically to 1.43 g h⁻¹ l⁻¹, indicating a 48% improvement under the oscillatory state at the dilution rate of 0.04 h⁻¹.     

Ethanol and xylitol production from glucose and xylose at high temperature by <Emphasis Type="Italic">Kluyveromyces</Emphasis> sp. IIPE453

A yeast strain Kluyveromyces sp. IIPE453 (MTCC 5314), isolated from soil samples collected from dumping sites of crushed sugarcane bagasse in Sugar Mill, showed growth and fermentation efficiency at high temperatures ranging from 45°C to 50°C. The yeast strain was able to use a wide range of substrates, such as glucose, xylose, mannose, galactose, arabinose, sucrose, and cellobiose, either for growth or fermentation to ethanol. The strain also showed xylitol production from xylose. In batch fermentation, the strain showed maximum ethanol concentration of 82 ± 0.5 g l⁻¹ (10.4% v/v) on initial glucose concentration of 200 g l⁻¹, and ethanol concentration of 1.75 ± 0.05 g l⁻¹ as well as xylitol concentration of 11.5 ± 0.4 g l⁻¹ on initial xylose concentration of 20 g l⁻¹ at 50°C. The strain was capable of simultaneously using glucose and xylose in a mixture of glucose concentration of 75 g l⁻¹ and xylose concentration of 25 g l⁻¹, achieving maximum ethanol concentration of 38 ± 0.5 g l⁻¹ and xylitol concentration of 14.5 ± 0.2 g l⁻¹ in batch fermentation. High stability of the strain was observed in a continuous fermentation by feeding the mixture of glucose concentration of 75 g l⁻¹ and xylose concentration of 25 g l⁻¹ by recycling the cells, achieving maximum ethanol concentration of 30.8 ± 6.2 g l⁻¹ and xylitol concentration of 7.35 ± 3.3 g l⁻¹ with ethanol productivity of 3.1 ± 0.6 g l⁻¹ h⁻¹ and xylitol productivity of 0.75 ± 0.35 g l⁻¹ h⁻¹, respectively.     

Statistical medium optimization for enhanced azadirachtin production in hairy root culture of Azadirachta indica

Azadirachtin, a well-known biopesticide, is a secondary metabolite extracted from the seeds of Azadirachta indica. In the present study, azadirachtin was produced in hairy roots of A. indica, generated by Agrobacterium rhizogenes-mediated transformation of leaf explants. Liquid cultures of A. indica hairy roots were developed with a liquid-to-flask volume ratio of 0.15. The kinetics of growth and azadirachtin production were established in a basal plant growth medium containing MS medium major and minor salts, Gamborg’s medium vitamins, and 30 g l⁻¹ sucrose. The highest azadirachtin accumulation in the hairy roots (up to 3.3 mg g⁻¹) and azadirachtin production (∼44 mg l⁻¹) was obtained on Day 25 of the growth cycle, with a biomass production of 13.3 g l⁻¹ dry weight. To enhance the production of azadirachtin, a Plackett–Burman experimental design protocol was used to identify key medium nutrients and concentrations to support high root biomass production and azadirachtin accumulation in hairy roots. The optimal nutrients and concentrations were as follows: 40 g l⁻¹ sucrose, 0.19 g l⁻¹ potassium dihydrogen phosphate, 3.1 g l⁻¹ potassium nitrate, and 0.41 g l⁻¹ magnesium sulfate. Concentrations were determined by a central composite design protocol and verified in shake-flask cultivation. The optimized medium composition yielded a root biomass production of 14.2 g l⁻¹ and azadirachtin accumulation of 5.2 mg g⁻¹, which was equivalent to an overall azadirachtin production of 73.84 mg l⁻¹, 68% more than that obtained under non-optimized conditions.     

Characterization of Candida sp. NY7122, a novel pentose-fermenting soil yeast

Yeasts that ferment both hexose and pentose are important for cost-effective ethanol production. We found that the soil yeast strain NY7122 isolated from a blueberry field in Tsukuba (East Japan) could ferment both hexose and pentose (d-xylose and l-arabinose). NY7122 was closely related to Candida subhashii on the basis of the results of molecular identification using the sequence in the D1/D2 domains of 26S rDNA and 5.8S-internal transcribed spacer region. NY7122 produced at least 7.40 and 3.86 g l⁻¹ ethanol from 20 g l⁻¹ d-xylose and l-arabinose within 24 h. NY7122 could produce ethanol from pentose and hexose sugars at 37°C. The highest ethanol productivity of NY7122 was achieved under a low pH condition (pH 3.5). Fermentation of mixed sugars (50 g l⁻¹ glucose, 20 g l⁻¹ d-xylose, and 10 g l⁻¹ l-arabinose) resulted in a maximum ethanol concentration of 27.3 g l⁻¹ for the NY7122 strain versus 25.1 g l⁻¹ for Scheffersomyces stipitis. This is the first study to report that Candida sp. NY7122 from a soil environment could produce ethanol from both d-xylose and l-arabinose.     

<Emphasis Type="Italic">Clostridium beijerinckii</Emphasis> mutant with high inhibitor tolerance obtained by low-energy ion implantation

Clostridium beijerinckii mutant strain IB4, which has a high level of inhibitor tolerance, was screened by low-energy ion implantation and used for butanol fermentation from a non-detoxified hemicellulosic hydrolysate of corn fiber treated with dilute sulfuric acid (SAHHC). Evaluation of toxicity showed C. beijerinckii IB4 had a higher level of tolerance than parent strain C. beijerinckii NCIMB 8052 for five out of six phenolic compounds tested (the exception was vanillin). Using glucose as carbon source, C. beijerinckii IB4 produced 9.1 g l⁻¹ of butanol with an acetone/butanol/ethanol (ABE) yield of 0.41 g g⁻¹. When non-detoxified SAHHC was used as carbon source, C. beijerinckii NCIMB 8052 grew well but ABE production was inhibited. By contrast, C. beijerinckii IB4 produced 9.5 g l⁻¹ of ABE with a yield of 0.34 g g⁻¹, including 2.2 g l⁻¹ acetone, 6.8 g l⁻¹ butanol, and 0.5 g l⁻¹ ethanol. The remarkable fermentation and inhibitor tolerance of C. beijerinckii IB4 appears promising for ABE production from lignocellulosic materials.     

Succinic acid production by a newly isolated bacterium

A new bacterial strain producing succinic acid was enriched from bovine rumen content. It is facultatively anaerobic, belongs to the family Pasteurellaceae and has similarity to the genus Mannheimia. In batch cultivations with D-glucose or sucrose the strain produced up to 5.8 g succinic acid l⁻¹ with a productivity and a yield of up to 1.5 g l⁻¹ h⁻¹ and 0.6 g g⁻¹, respectively. With crude glycerol up to 8.4 g l⁻¹, 0.9 g l⁻¹ h⁻¹ and 1.2 g g⁻¹ were obtained. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Citric acid production from glycerol-containing waste of biodiesel industry by Yarrowia lipolytica in batch, repeated batch, and cell recycle regimes

Yarrowia lipolytica A-101-1.22 produces high citric acid (112 g l⁻¹) with a yield of 0.6 g g⁻¹ and a productivity of 0.71 g l⁻¹ h⁻¹ during batch cultivation in the medium with glycerol-containing waste of biodiesel industry. However, it was observed that the specific citric acid production rate, which was maximal at the beginning of the biosynthesis, gradually decreases in the late production phase and it makes continuation of the process over 100 h pointless. The cell recycle and the repeated batch regimes were performed as ways for prolongation of citric acid synthesis by yeast. Using cell recycle, the active citric acid biosynthesis (96–107 g l⁻¹) with a yield of 0.64 g g⁻¹ and a productivity of 1.42 g l⁻¹ h⁻¹ was prolongated up to 300 h. Repeated batch culture remained stable for over 1000 h; the RB variant of 30% feed every 3 days showed the best results: 124.2 g l^-1 citric acid with a yield of 0.77 g g^-1 and a productivity of 0.85 g l^-1 h^-1.     

Fungal autolysate as a nutrient supplement for ethanol and chitosan production by <Emphasis Type="Italic">Mucor indicus</Emphasis>

Mucor indicus can be used to produce ethanol from a variety of sugars, including pentose’s. An extract of it, produced by autolysis, could replace yeast extract in culture medium with improved production of ethanol. At 10 g l⁻¹, the extract gave a higher ethanol yield (0.47 g g⁻¹) and productivity (0.71 g l⁻¹ h⁻¹) compared to medium containing yeast extract (yield 0.45 g g⁻¹; productivity 0.67 g l⁻¹ h⁻¹).     

Xylitol production by recombinant Corynebacterium glutamicum under oxygen deprivation

Wild-type Corynebacterium glutamicum produced 0.6 g l⁻¹ xylitol from xylose at a productivity of 0.01 g l⁻¹ h⁻¹ under oxygen deprivation. To increase this productivity, the pentose transporter gene (araE) from C. glutamicum ATCC31831 was integrated into the C. glutamicum R chromosome. Consequent disruption of its lactate dehydrogenase gene (ldhA), and expression of single-site mutant xylose reductase from Candida tenuis (CtXR (K274R)) resulted in recombinant C. glutamicum strain CtXR4 that produced 26.5 g l⁻¹ xylitol at 3.1 g l⁻¹ h⁻¹. To eliminate possible formation of toxic intracellular xylitol phosphate, genes encoding xylulokinase (XylB) and phosphoenolpyruvate-dependent fructose phosphotransferase (PTS^fru) were disrupted to yield strain CtXR7. The productivity of strain CtXR7 increased 1.6-fold over that of strain CtXR4. A fed-batch 21-h CtXR7 culture in mineral salts medium under oxygen deprivation yielded 166 g l⁻¹ xylitol at 7.9 g l⁻¹ h⁻¹, representing the highest bacterial xylitol productivity reported to date.     

Continuous butanol production with reduced byproducts formation from glycerol by a hyper producing mutant of <Emphasis Type="Italic">Clostridium pasteurianum</Emphasis>

Butanol, a four-carbon primary alcohol (C₄H₁₀O), is an important industrial chemical and has a good potential to be used as a superior biofuel. Bio-based production of butanol from renewable feedstock is a promising and sustainable alternative to substitute petroleum-based fuels. Here, we report the development of a process for butanol production from glycerol, which is abundantly available as a byproduct of biodiesel production. First, a hyper butanol producing strain of Clostridium pasteurianum was isolated by chemical mutagenesis. The best mutant strain, C. pasteurianum MBEL_GLY2, was able to produce 10.8 g l⁻¹ butanol from 80 g l⁻¹ glycerol as compared to 7.6 g l⁻¹ butanol produced by the parent strain. Next, the process parameters were optimized to maximize butanol production from glycerol. Under the optimized batch condition, the butanol concentration, yield, and productivity of 17.8 g l⁻¹, 0.30 g g⁻¹, and 0.43 g l⁻¹ h⁻¹ could be achieved. Finally, continuous fermentation of C. pasteurianum MBEL_GLY2 with cell recycling was carried out using glycerol as a major carbon source at several different dilution rates. The continuous fermentation was run for 710 h without strain degeneration. The acetone–butanol–ethanol productivity and the butanol productivity of 8.3 and 7.8 g l⁻¹ h⁻¹, respectively, could be achieved at the dilution rate of 0.9 h⁻¹. This study reports continuous production of butanol with reduced byproducts formation from glycerol using C. pasteurianum, and thus could help design a bioprocess for the improved production of butanol.     

Efficient production of lactic acid from sucrose and corncob hydrolysate by a newly isolated <Emphasis Type="Italic">Rhizopus oryzae</Emphasis> GY18

The aim of this study is to investigate production of l-lactic acid from sucrose and corncob hydrolysate by the newly isolated R. oryzae GY18. R. oryzae GY18 was capable of utilizing sucrose as a sole source, producing 97.5 g l⁻¹ l-lactic acid from 120 g l⁻¹ sucrose. In addition, the strain was also efficiently able to utilize glucose and/or xylose to produce high yields of l-lactic acid. It was capable of producing up to 115 and 54.2 g l⁻¹ lactic acid with yields of up to 0.81 g g⁻¹ glucose and 0.90 g g⁻¹ xylose, respectively. Corncob hydrolysates obtained by dilute acid hydrolysis and enzymatic hydrolysis of the cellulose-enriched residue were used for lactic acid production by R. oryzae GY18. A yield of 355 g lactic acid per kg corncobs was obtained after 72 h incubation. Therefore, sucrose and corncobs could serve as potential sources of raw materials for efficient production of lactic acid by R. oryzae GY18.     

Carbon source pulsed feeding to attain high yield and high productivity in poly(3-hydroxybutyrate) (PHB) production from soybean oil using <Emphasis Type="Italic">Cupriavidus necator</Emphasis>

Poly(3-hydroxybutyrate) (PHB) biosynthesis from soybean oil by Cupriavidus necator was studied using a bench scale bioreactor. The highest cell concentration (83 g l⁻¹) was achieved using soybean oil at 40 g l⁻¹ and a pulse of the same concentration. The PHB content was 81% (w/w), PHB productivity was 2.5 g l⁻¹ h⁻¹, and the calculated Y_p/s value was 0.85 g g⁻¹. Growth limitation and the onset of PHB biosynthesis took place due to exhaustion of P, and probably also Cu, Ca, and Fe.     

Isolation of <Emphasis Type="Italic">Aspergillus oryzae</Emphasis> mutants for heterologous protein production from a double proteinase gene disruptant

The recombinant Pichia pastoris harboring an improved methionine adenosyltransferase (MAT) shuffled gene was employed to biosynthesize S-adenosyl-l-methionine (SAM). Two l-methionine (l-Met) addition strategies were used to supply the precursor: the batch addition strategy (l-Met was added separately at three time points) and the continuous feeding strategies (l-Met was fed continuously at the rate of 0.1, 0.2, and 0.5 g l⁻¹ h⁻¹, respectively). SAM accumulation, l-Met conversion rate, and SAM productivity with the continuous feeding strategies were all improved over the batch addition strategy, which reached 8.46 ± 0.31 g l⁻¹, 41.7 ± 1.4%, and 0.18 ± 0.01 g l⁻¹ h⁻¹ with the best continuous feeding strategy (0.2 g l⁻¹ h⁻¹), respectively. The bottleneck for SAM production with the low l-Met feeding rate (0.1 g L⁻¹ h⁻¹) was the insufficient l-Met supply. The analysis of the key enzyme activities indicated that the tricarboxylic acid cycle and glycolytic pathway were reduced with the increasing l-Met feeding rate, which decreased the adenosine triphosphate (ATP) synthesis. The MAT activity also decreased as the l-Met feeding rate rose. The reduced ATP synthesis and MAT activity were probably the reason for the low SAM accumulation when the l-Met feeding rate reached 0.5 g l⁻¹ h⁻¹.     

Long-term production of soluble human Fas ligand through immobilization of <Emphasis Type="Italic">Dictyostelium discoideum</Emphasis> in a fibrous bed bioreactor

The production of recombinant glycoproteins in Dictyostelium discoideum by conventional cell culture methods was limited by low cell density as well as low growth rate. In this work, cotton towel with a good adsorption capability for D. discoideum cells was used as the immobilization matrix in an external fibrous bed bioreactor (FBB) system. With batch cultures in the FBB, the concentration of immobilized cells in the cotton fiber carrier increased to 1.37 × 10⁸ cells per milliliter after 110-h cultivation, which was about tenfold higher than the maximal cell density in the conventional free-cell culture. Correspondingly, a high concentration of soluble human Fas ligand (hFasL; 173.7 μg l⁻¹) was achieved with a high productivity (23 μg l⁻¹ h⁻¹). The FBB system also maintained a high density of viable cells for hFasL production during repeated-batch cultures, achieving a productivity of 9∼10 μg l⁻¹ h⁻¹ in all three batches studied during 15 days. The repeated-batch culture using immobilized cells of D. discoideum in the FBB system thus provides a good method for long-term and high-level production of hFasL.     

Production of ectoine through a combined process that uses both growing and resting cells of <Emphasis Type="Italic">Halomonas salina</Emphasis> DSM 5928<Superscript>T</Superscript>

Using ectoine-excreting strain Halomonas salina DSM 5928^T, we developed a new process for high-efficiency production of ectoine, which involved a combined process of batch fermentation by growing cells and production by resting cells. In the first stage, batch fermentation was carried out using growing cells under optimal fermentation conditions. The second stage was the production phase, in which ectoine was synthesized and excreted by phosphate-limited resting cells. Optimal conditions for synthesis and excretion of ectoine during batch fermentation in a 10 l fermentor were 0.5 mol l⁻¹ NaCl and an initial monosodium glutamate concentration of 80 g l⁻¹ respectively. The pH was adjusted to 7.0 and the temperature was maintained at 33°C. In phosphate-limited resting cells medium, monosodium glutamate and NaCl concentration was 200 g l⁻¹ and 0.5 mol l⁻¹, respectively, as well as pH was 7.0. The total concentration of ectoine produced was 14.86 g l⁻¹, the productivity and yield of ectoine was 7.75 g l⁻¹ day⁻¹ and 0.14 g g⁻¹, respectively, and the percentage of ectoine excreted was 79%. These levels of ectoine production and excretion are the highest reported to date.     

Butanol production by Clostridium beijerinckii BA101 using cassava flour as fermentation substrate: enzymatic versus chemical pretreatments

Cassava flour (CF), a cost-effective source of starch, was employed as a substrate for successful acetone-butanol-ethanol (ABE) production by batch-fermentation with Clostridium beijerinckii. The effect of temperature, initial concentration of CF and chemical/enzymatic hydrolysis were studied in a 2³ factorial design. Results revealed that temperature and initial concentration of substrate exert a significant effect on ABE production, as well as interactions of temperature with the other variables. Solvent production was maximized when working at 40°C, 60 g l⁻¹ CF and enzymatic pretreatment. An average of 31.38 g l⁻¹ ABE was produced after 96 h, with a productivity of 0.33 g l⁻¹ h⁻¹. A posterior randomized block design (3 × 2) showed that enzymatic hydrolysis (with saccharification periods of 6 h at 60°C) enhances both reducing sugar and solvent production if compared to chemical pretreatments. Average ABE production in this case was 27.28 g l⁻¹, with a productivity of 0.28 g l⁻¹ h⁻¹. Results suggest that CF may be a suitable substrate for industrial ABE production.     

Substrate specificity of a recombinant ribose-5-phosphate isomerase from <Emphasis Type="Italic">Streptococcus pneumoniae</Emphasis> and its application in the production of <Emphasis Type="SmallCaps">l</Emphasis>-lyxose and <Emphasis Type="SmallCaps">l</Emphasis>-tagatose

A putative ribose-5-phosphate isomerase (RpiB) from Streptococcus pneumoniae was purified with a specific activity of 26.7 U mg⁻¹ by Hi-Trap Q HP anion exchange and Sephacryl S-300 HR 16/60 gel filtration chromatographies. The native enzyme existed as a 96-kDa tetramer with activity maxima at pH 7.5 and 35°C. The RpiB exhibited isomerization activity with l-lyxose, l-talose, d-gulose, d-ribose, l-mannose, d-allose, l-xylulose, l-tagatose, d-sorbose, d-ribulose, l-fructose, and d-psicose and exhibited particularly high activity with l-form monosaccharides such as l-lyxose, l-xylulose, l-talose, and l-tagatose. With l-xylulose (500 g l⁻¹) and l-talose (500 g l⁻¹) substrates, the optimum concentrations of RpiB were 300 and 600 U ml⁻¹, respectively. The enzyme converted 500 g l⁻¹ l-xylulose to 350 g l⁻¹ l-lyxose after 3 h, and yielded 450 g l⁻¹ l-tagatose from 500 g l⁻¹ l-talose after 5 h. These results suggest that RpiB from S. pneumoniae can be employed as a potential producer of l-form monosaccharides.     

A study of the diatom-dominated microplankton summer assemblages in coastal waters from Terre Adélie to the Mertz Glacier, East Antarctica (139°E–145°E)

In January 2004 the microplankton community from the coastal waters of Terre Adélie and Georges V Land (139°E–145°E) was studied. Results showed a diatom-dominated bloom with chlorophyll a levels averaging 0.64 μg l⁻¹ at 5 m depth (range 0.21–1.57 μg l⁻¹). Three geographic assemblages of diatoms were identified, based on principal diatom taxa abundances. The stratified waters near the Mertz Glacier presented highest phytoplankton biomasses (0.28–1.57 μg Chl a l⁻¹ at 5 m) and diatom abundances (6,507–70,274 cells l⁻¹ at 5 m), but low diversity, dominated by Fragilariopsis spp. Lower biomasses (0.38–0.94 μg Chl a l⁻¹ at 5 m) and abundances (394–9,058 cells l⁻¹ at 5 m) were observed in the mixed waters around the Astrolabe Glacier with a diverse diatom community characterised by larger species Corethron pennatum and Rhizosolenia spp. Finally an intermediate zone between them over the shallower shelf waters of the Adélie Bank represented by Chaetoceros criophilus, where biomasses (0.21–0.35 μg Chl a l⁻¹ at 5 m) and abundances (1,190–5,431 cells l⁻¹ at 5 m) were lowest, coinciding with the presence of abundant herbivorous zooplankton.