Chemical and Enzymatic Synthetic Methods for Asymmetric Oxidation of the C–C Double Bond

A number of synthetically useful methods for asymmetric oxidation of the C–C double bond are briefly reviewed. This includes chemical asymmetric epoxidation, such as Sharpless, Julia, and Jacobsen epoxidation, asymmetric cis-dihydroxylation of olefins, monooxygenase-catalyzed epoxidation, dioxygenase-catalyzed cis-dihydroxylation of aromatics, and trans-dihydroxylation of C–C double bond catalyzed by a monooxygenase and an epoxide hydrolase. The catalytic system, substrate range, enantioselectivity, synthetic application, and scope and limitation of each method are described.     

Chemical and Enzymatic Synthetic Methods for Asymmetric Oxidation of the C-C Double Bond

A number of synthetically useful methods for asymmetric oxidation of the C-C double bond are briefly reviewed. This includes chemical asymmetric epoxidation, such as Sharpless, Julia, and Jacobsen epoxidation, asymmetric cis-dihydroxylation of olefins, monooxygenase-catalyzed epoxidation, dioxygenase-catalyzed cis-dihydroxylation of aromatics, and trans-dihydroxylation of C-C double bond catalyzed by a monooxygenase and an epoxide hydrolase. The catalytic system, substrate range, enantioselectivity, synthetic application, and scope and limitation of each method are described.     

HPLC study of oxidation products of hydroethidine in chemical and biological systems: ramifications in superoxide measurements

Methods for the detection and quantitation of hydroethidine (HE) and its oxidation products by HPLC analysis are described. Synthetic methods for preparation of authentic standards (2-hydroxyethidium and diethidium) are provided. Potential applications of the HPLC methods to chemical and biological systems are discussed. Specific examples of chromatograms obtained using UV–Vis absorption, fluorescence, electrochemical, and mass spectrometry detectors are provided. The development of a dual electrochemical and fluorescence detection methodology and its applications are described. The HPLC-based method enables analyses of HE and its oxidation products such as ethidium and the dimeric products of HE. The ramifications of HPLC measurement of HE and its oxidation products in the detection and quantitation of 2-hydroxyethidium, the diagnostic marker product of superoxide and HE, in the intracellular milieu are discussed. Similarly, mitochondria-targeted HE conjugated to a triphenylphosphonium group (Mito-HE or Mito-SOX) also forms oxidation products (dimers of Mito-HE and Mito-E⁺) that can affect the detection and quantitation of 2-hydroxy-mito-ethidium, the diagnostic marker product of Mito-HE and superoxide in mitochondria.     

Electrochemistry of heme-thiolate proteins

Heme-thiolate proteins (HTPs) play critical biological roles by catalyzing challenging chemical reactions. The ability of HTPs to selectively oxidize inert substrates under mild conditions has led to much research aimed at the development of useful in vitro oxidation technology. Very complex electron transfer machinery is required to support HTP chemistry, and electrochemical methods provide many of the needed components. The challenge is to find a system that has good electrode-enzyme electronic coupling that, in turn, would drive catalytic turnover at relatively high rates. Several systems reviewed herein have shown promise in experimental work on components that could be part of a molecular machine for the selective oxidation of organic substrates.     

Oxidation of propene and 1-butene byMethylococcus capsulatus andMethylosinus trichosporium

Summary Methane-grown cells ofMethylococcus capsulatus andMethylosinus trichosporium readily oxidized propene and various isomers of butene to their respective epoxides. When examined in a proton NMR spectrum using tris([3-trifluoromethylhydroxymethylene]-d-camphorato), europium III derivative as an optically active chemical shift reagent, the products propylene oxide and 1,2-epoxybutane were found to contain equal amounts of both isomers. Methane-grown cells of both bacteria had considerable levels of reducing equivalents to catalyze the epoxidation of gaseous olefins. Cells depleted of reductants catalyzed the oxidation in the presence of low levels of methanol or formaldehyde with a stoichiometry of about 2:1. The rates of epoxidation of propene and 1-butene in a continuous reactor were 2–3-times that of a batch-wise reaction; the epoxidation activity, however, was lost within 3 h. The inactivation was attributed to the reactivity of the accumulated epoxides in the reactor. Propene and 1-butene oxidation by both bacteria were drastically inhibited by the respective products. Thus, the major problem in the application of microorganisms for production of epoxides from gaseous olefins is the rapid separation of the reactive products.     

NMR and HPLC-MS/MS analysis of synthetically prepared linoleic acid diol glucuronides

Hydroxylated fatty acids are important mediators of many physiological and pathophysiological processes in a variety of human tissues. Recent evidence shows that in humans many of these are ultimately excreted in the urine as the glucuronide conjugates. In this paper we describe a general approach for the chemical synthesis of glucuronide conjugate derivatives of fatty acids. The synthesis strategy employs three steps (epoxidation, hydrolysis and glucuronidation) using methyl linoleate as a model non-hydroxylated starting compound. Hydroxylated starting compounds would require only the glucuronidation step. NMR and HPLC-MS/MS experiments were used to help determine the structure of the synthesized glucuronide conjugates and to identify fragmentation product ions useful for discriminating positional isomers in biological samples. This synthetic strategy should prove useful for generating analytical standards in order to identify and quantify glucuronide metabolites of hydroxylated fatty acids in humans.     

Epoxidation of styrene by human cyt P450 1A2 by thin film electrolysis and peroxide activation compared to solution reactions

Films of human cytochrome P450 1A2 (cyt P450 1A2) and polystyrene sulfonate were constructed on carbon cloth electrodes using layer-by-layer alternate absorption and evaluated for electrochemical- and H(2)O(2)-driven enzyme-catalyzed oxidation of styrene to styrene oxide. At -0.6 V vs. saturated calomel reference electrode in an electrochemical cell, epoxidation of styrene was mediated by initial catalytic reduction of dioxygen to H(2)O(2) which activates the enzyme for the catalytic oxidation. Slightly larger turnover rates for cyt P450 1A2 were found for the electrolytic and H(2)O(2) (10 mM) driven reactions compared to conventional enzymatic reactions using cyt P450s, reductases, and electron donors for cytochromes P450 1A2. Cyt P450(cam) gave comparable turnover rates in film electrolysis and solution reactions. Results demonstrate that cyt P450 1A2 catalyzes styrene epoxidation faster than cyt P450(cam), and suggests the usefulness of this thin-film electrolytic method for relative turnover rate studies of cyt P450s.     

Determination of Antioxidant Activity of Various Bioantioxidants and Their Mixtures by the Amperometric Method

To date, simple and operative electrochemical methods are widely used to study antioxidant properties of various biological objects. One of them is the amperometric method, which is used in various fields of science, technology and medicine to determine the antioxidant activity (AOA) of various beverages, extracts and biological fluids, as well as the total content of antioxidants (AOs) present in them. Measurements of AOA (electrochemical oxidability) of some known individual AO and their mixtures by the amperometric method was performed in the present work. The coefficients of their oxidability were determined. The AOA values obtained correlate well with the AOA of these compounds measured by other methods. The coincidence of the experimental values of AOA and the values calculated with the use of the coefficients of oxidability for each component of the mixture was observed for most combinations of binary mixtures of used AOs. This indicates the absence of interaction between them (synergism or antagonism) during the oxidation. Several mixtures with a lower value of the measured AOA compared with the calculated value (antagonism) represented the exception. During the electrochemical oxidation of the “oxidized glutathione + ascorbic acid” mixture, partial reduction of glutathione by ascorbic acid is likely to proceed, which results in an excess of the measured AOA value over the calculated value. The results obtained may be useful when working with devices based on the amperometric method.     

The fairytale of the GSSG/GSH redox potential

Background

The term GSSG/GSH redox potential is frequently used to explain redox regulation and other biological processes.

Scope of review

The relevance of the GSSG/GSH redox potential as driving force of biological processes is critically discussed. It is recalled that the concentration ratio of GSSG and GSH reflects little else than a steady state, which overwhelmingly results from fast enzymatic processes utilizing, degrading or regenerating GSH.

Major conclusions

A biological GSSG/GSH redox potential, as calculated by the Nernst equation, is a deduced electrochemical parameter based on direct measurements of GSH and GSSG that are often complicated by poorly substantiated assumptions. It is considered irrelevant to the steering of any biological process. GSH-utilizing enzymes depend on the concentration of GSH, not on [GSH]², as is predicted by the Nernst equation, and are typically not affected by GSSG. Regulatory processes involving oxidants and GSH are considered to make use of mechanistic principles known for thiol peroxidases which catalyze the oxidation of hydroperoxides by GSH by means of an enzyme substitution mechanism involving only bimolecular reaction steps.

General significance

The negligibly small rate constants of related spontaneous reactions as compared with enzyme-catalyzed ones underscore the superiority of kinetic parameters over electrochemical or thermodynamic ones for an in-depth understanding of GSH-dependent biological phenomena. At best, the GSSG/GSH potential might be useful as an analytical tool to disclose disturbances in redox metabolism. This article is part of a Special Issue entitled Cellular Functions of Glutathione.     

Imaging and speciation of trace elements in biological environment

Mineral elements, often at the trace level, play a considerable role in physiology and pathology of biological systems. Metallogenomics, metalloproteomics, and metallomics are among the emerging disciplines which are critically dependent on spatially resolved concentration maps of trace elements in a cell or tissue, on information on chemical speciation, and on that on metal-binding coordination sites. The mini-review discusses recent progress in analytical techniques for element profiling on the genome scale, biological trace element imaging, and probing, identification and quantification of chemical species in the biological environment. Imaging of the element distribution in cells and tissue sections is becoming possible with sub-micrometer spatial resolution and picogram-level sensitivity owing to advances in laser ablation MS, ion beam and synchrotron radiation X-ray fluorescence microprobes. Progress in nanoflow chromatography and capillary electrophoresis coupled with element specific ICP MS and molecule-specific electrospray MS/MS and MALDI enables speciation of elements in microsamples in a complex biological environment. Laser ablation ICP MS, micro-SXRF, and micro-PIXE allow mapping of trace element distribution in 1D and 2D proteomics gels. The increasing sensitivity of EXAFS and XANES owing to the use of more intense synchrotron beams and efficient focusing optics provide information about oxidation state, fingerprint speciation of metal sites and metal-site structures.     

Electrochemical biosensors: recommended definitions and classification

Two Divisions of the International Union of Pure and Applied Chemistry (IUPAC), namely Physical Chemistry (Commission 1.7 on Biophysical Chemistry formerly Steering Committee on Biophysical Chemistry) and Analytical Chemistry (Commission V.5 on Electroanalytical Chemistry) have prepared recommendations on the definition, classification and nomenclature related to electrochemical biosensors: these recommendations could, in the future, be extended to other types of biosensors. An electrochemical biosensor is a self-contained integrated device, which is capable of providing specific quantitative or semi-quantitative analytical information using a biological recognition element (biochemical receptor) which is retained in direct spatial contact with an electrochemical transduction element. Because of their ability to be repeatedly calibrated, we recommend that a biosensor should be clearly distinguished from a bioanalytical system, which requires additional processing steps, such as reagent addition. A device that is both disposable after one measurement, i.e. single use, and unable to monitor the analyte concentration continuously or after rapid and reproducible regeneration, should be designated a single use biosensor. Biosensors may be classified according to the biological specificity-conferring mechanism or, alternatively, to the mode of physico-chemical signal transduction. The biological recognition element may be based on a chemical reaction catalysed by, or on an equilibrium reaction with macromolecules that have been isolated, engineered or present in their original biological environment. In the latter cases. equilibrium is generally reached and there is no further, if any, net consumption of analyte(s) by the immobilized biocomplexing agent incorporated into the sensor. Biosensors may be further classified according to the analytes or reactions that they monitor: direct monitoring of analyte concentration or of reactions producing or consuming such analytes; alternatively, an indirect monitoring of inhibitor or activator of the biological recognition element (biochemical receptor) may be achieved. A rapid proliferation of biosensors and their diversity has led to a lack of rigour in defining their performance criteria. Although each biosensor can only truly be evaluated for a particular application, it is still useful to examine how standard protocols for performance criteria may be defined in accordance with standard IUPAC protocols or definitions. These criteria are recommended for authors. referees and educators and include calibration characteristics (sensitivity, operational and linear concentration range, detection and quantitative determination limits), selectivity, steady-state and transient response times, sample throughput, reproducibility, stability and lifetime.     

Measuring oxidative damage to DNA; HPLC and the comet assay compared

Depending on the analytical method employed estimates of background levels of base oxidation in human DNA vary over orders of magnitude. It is now realised that oxidation of guanine in vitro can result in serious overestimation of the nucleoside by HPLC (with electrochemical detection). We have modified procedures of isolation, hydrolysis and storage of DNA with the aim of eliminating this artefact. Vacuum- or freeze-drying, and dialysis, tend to encourage oxidation. We compare results obtained with HPLC and with the comet assay, which employs lesion-specific enzymes to introduce breaks in DNA at sites of oxidative damage. Although estimates of background levels of DNA oxidation using the comet assay are several-fold lower than the estimates by HPLC, both approaches have been used successfully to detect differences between human subjects or population groups that seem to relate to human disease and nutritional factors.     

Application of microorganisms towards synthesis of chiral terpenoid derivatives

Biotransformations are a standard tool of green chemistry and thus are following the rules of sustainable development. In this article, we describe the most common types of reactions conducted by microorganisms applied towards synthesis of chiral terpenoid derivatives. Potential applications of obtained products in various areas of industry and agriculture are shown. We also describe biological activity of presented compounds. Stereoselective hydroxylation, epoxidation, Baeyer-Villiger oxidation, stereo- and enantioselective reduction of ketones, and various kinetic resolutions carried out by bacteria and fungi have been reviewed. Mechanistic considerations regarding chemical and enzymatic reactions are presented. We also briefly describe modern approaches towards enhancing desired enzymatic activity in order to apply modified biocatalysts as an efficient tool and green alternative to chemical catalysts used in industry.     

DNA hybridization electrochemical sensor using conducting polymer

We report the use of poly(thiophen-3-yl-acetic acid 1,3-dioxo-1,3-dihydro-isoindol-2-yl ester (PTAE) for application to electrochemical hybridization sensor. A synthetic route for the thiophen-3-yl-acetic acid 1,3-dioxo-1,3-dihydro-isoindol-2-yl ester (TAE) is described, which is used as a monomer of conducting polymer sensor. A direct chemical substitution of probe oligonucleotide to good leaving group site in the PTAE is carried out on the conducting polymer film. A biological recognition can be monitored by comparison with the electrochemical signal (cyclic voltammogram) of single and double strand state oligonucleotide. The sensitivity of the electrochemical sensor is 0.62 microA/nmole and the detection limit is 1 nmole. The oxidation current of double strand state oligonucleotide is a half of that of single strand, that is corresponding to the decrease of electrochemical activity of conducting polymer with increase of stiffness of side group of the polymer. The oxidation current decreasing ratios of perfect matched and single nucleotide mismatched samples are 52 and 25-30%, respectively. The more decreasing ratio is attributable to the more steric hindrance of single nucleotide mismatched sample.     

Electrochemical Oxidations of Some Purine Nucleosides. Formation of Some Novel Purine Oligonucleosides

Abstract

The electrochemical oxidation of the purine nucleosides xanthosine and guanosine at carbon electrodes has been studied. The initial electrochemical event is a 1e-, 1H+ oxidation to give free radicals which undergo a series of follow-up chemical and electrochemical reactions which lead to formation of a new class of purine oligonucleosides.     

Microbial transformation of the sesquiterpene lactone tagitinin C by the fungus Aspergillus terreus

The biotransformation of the sesquiterpene lactone tagitinin C by the fungus Aspergillus terreus MT 5.3 yielded a rare derivative that was elucidated by spectrometric methods. The fungus led to the formation of a different product through an unusual epoxidation reaction between C4 and C5, formation of a C3,C10 ether bridge, and a methoxylation of the C1 of tagitinin C. The chemical structure of the product, namely 1β-methoxy-3α-hydroxy-3,10β-4,5α-diepoxy-8β-isobutyroyloxygermacr-11(13)-en-6α,12-olide, is the same as that of a derivative that was recently isolated from the flowers of a Brazilian population of Mexican sunflower (Tithonia diversifolia), which is the source of the substrate tagitinin C. The in vitro cytotoxic activity of the substrate and the biotransformed product were evaluated in HL-60 cells using an MTT assay, and both compounds were found to be cytotoxic. We show that soil fungi may be useful in the biotransformation of sesquiterpene lactones, thereby leading to unusual changes in their chemical structures that may preserve or alter their biological activities, and may also mimic plant biosynthetic pathways for production of secondary metabolites.     

Reactive conducting polymers as actuating sensors and tactile muscles

Films of conducting polymers when used as electrodes in an electrolytic solution oxidize and reduce under the flow of anodic and cathodic currents, respectively. The electrochemical reactions induce conformational movements of the chains, generation or destruction of free volume and interchange of ions and solvent with the electrolyte giving a gel that reacts, swells or shrinks. Electric pulses acting on reactive gels constituted by polymers, solvent and ions are the closest artificial materials to those that constitute actuating biological organs. The electrochemical reaction under the flow of a constant current promotes a progressive change of color, volume, porosity, stored charge and storage or release of ions. The reaction is kinetically controlled by the conformational movements or by the diffusion of counterions through the gel; it works under electrochemical equilibrium and defines, at any intermediate oxidation state, equilibrium potentials. Any variable (mechanical, chemical, optical, magnetic, etc) acting on the equilibrium will induce a change in the working potential of any device, driven by a constant current, based on this reaction; actuating-sensing devices based on the electrochemical properties are expected. Artificial muscles able to sense pushed weights, electrolyte concentration or ambient temperature during actuation are described. The activation energy of the reaction includes structural information and allows the obtention of the conformational energy, the heart of both actuating and sensing properties.     

Identification and characterization of oxidation and deamidation sites in monoclonal rat/mouse hybrid antibodies

Oxidation of methionine residues and deamidation of asparagine residues are the major causes of chemical degradation of biological pharmaceuticals. The mechanism of these non-enzymatic chemical reactions has been studied in great detail. However, the identification and quantification of oxidation and deamidation sites in a given protein still remains a challenge. In this study, we identified and characterized several oxidation and deamidation sites in a rat/mouse hybrid antibody. We evaluated the effects of the sample preparation on oxidation and deamidation levels and optimized the peptide mapping method to minimize oxidation and deamidation artifacts. Out of a total number of 18 methionine residues, we identified six methionine residues most susceptible to oxidation. We determined the oxidation rate of the six methionine residues using 0.05% H₂O₂ at different temperatures. Methionine residue 256 of the mouse heavy chain showed the fastest rate of oxidation under those conditions with a half life of approximately 200 min at 4 °C and 27 min at 37 °C. We identified five asparagine residues prone to deamidation under accelerated conditions of pH 8.6 at 37 °C. Kinetic characterization of the deamidation sites showed that asparagine residue 218 of the rat heavy chain exhibited the fastest rate of deamidation with a half live of 1.5 days at pH 8.6 and 37 °C. Analysis of antibody isoforms using free flow electrophoresis showed that deamidation is the major cause of the charged variants of this rat/mouse hybrid antibody.     

Formation and hydrolysis of triacylglycerol and sterols epoxides: role of unsaturated triacylglycerol peroxyl radicals

Epoxidation of unsaturated pure triacylglycerols (TAGs), cholesterol, and phytosterols was investigated using air and 18O2 oxidation experiments. Oxidized lipids were analyzed using both triple quadrupole mass spectrometry (MS), ion-trap MS in the direct infusion mode, and triple quadrupole MS in tandem with a liquid chromatograph (LC-MS/MS). Pure 1,2-distearoyl-3-oleoyl-glycerol (SSO) samples were heated in sealed vials under air or 18O2 atmosphere at 160 degrees C for 1 h. LC-MS/MS analysis of 18O-labeled oxidized TAGs revealed that hydroperoxides and epoxide TAGs are formed mainly during this first step. Then, oxidized TAGs were incubated under an inert atmosphere, separately with 1,2-dipalmitoyl-3-oleoyl-glycerol (PPO) at 160 degrees C for 90 min, and with cholesterol and stigmasterol at 100 degrees C for 10 min. Subsequent LC-MS/MS analysis revealed the occurrence of epoxidation products of PPO, cholesterol, and sitosterol. Therefore, we showed the epoxidation of unsaturated lipids proceeds readily in contact with hydroperoxide TAGs, in the absence of molecular oxygen. Dual oxidation experiments using both air and 18O2 allowed investigation of oxygen atom transfer during epoxidation of lipids. Moreover, the experimental oxidation design presented can be used to study fragmentation pathways, as illustrated for 5,6-epoxycholesterol (CE) on both triple quadrupole and ion-trap MS. We report for the first time the occurrence of 5,6;22,23-diepoxystigmasterol (StDE) and 5,6;22,23-diepoxybrassicasterol (BDE) in autoxidized vegetable oils. Additionally, acid-catalyzed hydrolysis of epoxidized lipids, with emphasis on phytosterol polyol formation, was investigated using a model gastric medium. For confirmation, almost all identified products were synthesized and characterized by MS.