Direct and indirect roles of His‐418 in metal binding and in the activity of β‐galactosidase (E. coli)

The active site of ß‐galactosidase (E. coli) contains a Mg²⁺ ion ligated by Glu‐416, His‐418 and Glu‐461 plus three water molecules. A Na⁺ ion binds nearby. To better understand the role of the active site Mg²⁺ and its ligands, His‐418 was substituted with Asn, Glu and Phe. The Asn‐418 and Glu‐418 variants could be crystallized and the structures were shown to be very similar to native enzyme. The Glu‐418 variant showed increased mobility of some residues in the active site, which explains why the substitutions at the Mg²⁺ site also reduce Na⁺ binding affinity. The Phe variant had reduced stability, bound Mg²⁺ weakly and could not be crystallized. All three variants have low catalytic activity due to large decreases in the degalactosylation rate. Large decreases in substrate binding affinity were also observed but transition state analogs bound as well or better than to native. The results indicate that His‐418, together with the Mg²⁺, modulate the central role of Glu‐461 in binding and as a general acid/base catalyst in the overall catalytic mechanism. Glucose binding as an acceptor was also dramatically decreased, indicating that His‐418 is very important for the formation of allolactose (the natural inducer of the lac operon).     

Characterization of an alkaline transition intermediate stabilized in the Phe82Trp variant of yeast iso-1-cytochrome c

In general, mutation of the phylogenetically conserved residue Phe82 in yeast iso-1-cytochrome c destabilizes the native conformation of the protein by facilitating the ligand exchange reactions that are associated with the alkaline conformational transitions of the ferricytochrome. Of the Phe82 variants surveyed thus far, Phe82Trp is unique in that it adopts a thermodynamically stable, high-spin conformation at mildly alkaline pH. This species exhibits spectroscopic features that can only be detected transiently in other ferricytochromes c within the first 100 ms immediately after a pH-jump from neutrality to pH >10. Spectroscopic characterization of this high-spin reaction intermediate suggests that in addition to an obligatory pentacoordinate heme iron, a group within the heme pocket coordinates the heme iron but is then replaced either by Met80, to revert to the native conformation, or by Lys73 or Lys79, to yield one of the conventional alkaline conformers. Evidence is presented to suggest that this group is either a hydroxide ion or Tyr67 rather than a loosely bound Met80.     

Crystal structure of extended-spectrum beta-lactamase Toho-1: insights into the molecular mechanism for catalytic reaction and substrate specificity expansion

The crystallographic structure of the class A beta-lactamase Toho-1, an extended-spectrum beta-lactamase with potent activity against expanded-spectrum cephems, has been determined at 1.65 A resolution. The result reveals that the Lys73 side chain can adopt two alternative conformations. The predominant conformation of Lys73 is different from that observed in the E166A mutant, indicating that removal of the Glu166 side chain changes the conformation of the Lys73 side chain and thus the interaction between Lys73 and Glu166. The Lys73 side chain would play an important role in proton relay, switching its conformation from one to the other depending on the circumstances. The electron density map also implies possible rotation of Ser237. Comparison of the Toho-1 structure with the structure of other class A beta-lactamases shows that the hydroxyl group of Ser237 is likely to rotate through interaction with the carboxyl group of the substrate. Another peculiarity is the existence of three sulfate ions positioned in or near the substrate-binding cavity. One of these sulfate ions is tightly bound to the active center, while the other two are held by a region of positive charge formed by two arginine residues, Arg274 and Arg276. This positively charged region is speculated to represent a pseudo-binding site of the beta-lactam antibiotics, presumably catching the methoxyimino group of the third-generation cephems prior to proper binding in the substrate-binding cleft for hydrolysis. This high-resolution structure, together with detailed kinetic analysis of Toho-1, provides a new hypothesis for the catalytic mechanism and substrate specificity of Toho-1.     

The structural basis for substrate specificity and inhibition of human S-adenosylmethionine decarboxylase

S-Adenosylmethionine decarboxylase belongs to a small class of amino acid decarboxylases that use a covalently bound pyruvate as a prosthetic group. It is an essential enzyme for polyamine biosynthesis and provides an important target for the design of anti-parasitic and cancer chemotherapeutic agents. We have determined the structures of S-adenosylmethionine decarboxylase complexed with the competitive inhibitors methylglyoxal bis(guanylhydrazone) and 4-amidinoindan-1-one-2'-amidinohydrazone as well as the irreversible inhibitors 5'-deoxy-5'-[N-methyl-N-[(2-aminooxy)ethyl]amino]adenosine, 5'-deoxy-5'-[N-methyl-N-(3-hydrazinopropyl)amino]adenosine, and the methyl ester analogue of S-adenosylmethionine. These structures elucidate residues important for substrate binding and show how those residues interact with both covalently and noncovalently bound inhibitors. S-Adenosylmethionine decarboxylase has a four-layer alphabeta betaalpha sandwich fold with residues from both beta-sheets contributing to substrate and inhibitor binding. The side chains of conserved residues Phe7, Phe223, and Glu247 and the backbone carbonyl of Leu65 play important roles in binding and positioning the ligands. The catalytically important residues Cys82, Ser229, and His243 are positioned near the methionyl group of the substrate. One molecule of putrescine per monomer is observed between the two beta-sheets but far away from the active site. The activating effects of putrescine may be due to conformational changes in the enzyme, to electrostatic effects, or both. The adenosyl moiety of the bound ligand is observed in the unusual syn conformation. The five structures reported here provide a framework for interpretation of S-adenosylmethionine decarboxylase inhibition data and suggest strategies for the development of more potent and more specific inhibitors of S-adenosylmethionine decarboxylase.     

Topological role of cytochrome P450 2D6 active site residues

Recent reports have identified Phe120, Asp301, Thr309, and Glu216 as important residues in cytochrome P450 2D6 (CYP2D6) substrate binding and catalysis. Complementary homology models have located these amino acids within the binding pocket of CYP2D6 and in the present study we have used aryldiazenes to test these models and gain further insight in the role these amino acids have in maintaining the integrity of the active site cavity. When Phe120 was replaced to alanine, there was a significant increase in probe migration to pyrrole nitrogens C and D, in agreement with homology models which have located the phenyl side-chain of Phe120 above these two pyrrole rings. No changes in topology were observed with the D301Q mutant, supporting claims that in this mutant the electrostatic interactions with the B/C-loop are largely maintained and the loop retains its native orientation. The T309V mutation resulted in significant topological alteration suggesting that, in addition to its potential role in dioxygen activation, Thr309 plays an important structural role within the active site crevice. Replacement of Ile106 with Glu, engineered to cause electrostatic repulsion with Glu216, had a profound topological effect in the higher region within the active site cavity and impaired the catalytic activity towards CYP2D6 probe substrates.     

Functional analysis of the copper-dependent quercetin 2,3-dioxygenase. 2. X-ray absorption studies of native enzyme and anaerobic complexes with the substrates quercetin and myricetin

Quercetin 2,3-dioxygenase (2,3QD) is a mononuclear copper-dependent dioxygenase which catalyzes the cleavage of the heterocyclic ring of the flavonol quercetin (5,7,3',4'-tetrahydroxy flavonol) to produce 2-protocatechuoyl-phloroglucinol carboxylic acid and carbon monoxide. In this study, X-ray absorption spectroscopy has been used to characterize the local structural environment of the Cu(2+) center of Aspergillus japonicus 2,3QD. Analysis of the EXAFS region of native 2,3QD at functionally relevant pH (pH 6.0) indicates an active site equally well-described by either four or five ligands (3N(His) + 1-2O) at an average distance of 2.00 A. Bond valence sum analysis confirms that the best model is somewhere between the two. When, however, 2,3QD is anaerobically complexed with its natural substrate quercetin, the copper environment undergoes a transition to a five-coordinated cage, which is also best modeled by a single shell of N/O scatterers at the average distance of 2.00 A. This coordination is independently confirmed by the anaerobic complex with myricetin (5'-hydroxy quercetin). XANES analysis confirms that substrate binding does not reduce the Cu(2+) ion. The present study gives the first direct insights into the coordination chemistry of the enzyme complexed with its substrates. It suggests that activation for O(2) attack is achieved by monodentate substrate complexation to the copper ion through the 3-hydroxyl group. In addition, monodentate carboxylate ligation by the Glu73 side chain is likely to play a role in the fine-tuning of the equilibrium leading to the formation of the activated E.S complex.     

Structural basis for the functional and inhibitory mechanisms of β-hydroxyacyl-acyl carrier protein dehydratase (FabZ) of Plasmodium falciparum

The β-hydroxyacyl-acyl carrier protein dehydratase of Plasmodium falciparum (PfFabZ) catalyzes the third and important reaction of the fatty acid elongation cycle. The crystal structure of PfFabZ is available in hexameric (active) and dimeric (inactive) forms. However, PfFabZ has not been crystallized with any bound inhibitors until now. We have designed a new condition to crystallize PfFabZ with its inhibitors bound in the active site, and determined the crystal structures of four of these complexes. This is the first report on any FabZ enzyme with active site inhibitors that interact directly with the catalytic residues. Inhibitor binding not only stabilized the substrate binding loop but also revealed that the substrate binding tunnel has an overall shape of “U”. In the crystal structures, residue Phe169 located in the middle of the tunnel was found to be in two different conformations, open and closed. Thus, Phe169, merely by changing its side chain conformation, appears to be controlling the length of the tunnel to make it suitable for accommodating longer substrates. The volume of the substrate binding tunnel is determined by the sequence as well as by the conformation of the substrate binding loop region and varies between organisms for accommodating fatty acids of different chain lengths. This report on the crystal structures of the complexes of PfFabZ provides the structural basis of the inhibitory mechanism of the enzyme that could be used to improve the potency of inhibitors against an important component of fatty acid synthesis common to many infectious organisms.     

Molecular dynamics simulations of human butyrylcholinesterase

Herein, we present results from molecular dynamics (MD) simulations of the human butyrylcholinesterase (BuChE) enzyme in aqueous solution. Two configurations of the unbound form of BuChE differing in the presence or absence of a sodium ion inside the protein gorge were simulated for 10 and 5 ns, respectively. Besides complementing the structural information provided by X-ray data, the MD simulations give insight into the structure of the native BuChE enzyme. For example, it is shown that: the nucleophilic Ser(198) residue and the various binding subsites in the BuChE catalytic cavity are readily accessible from the exterior of the protein; the presence of the sodium ion dynamically explores two different binding sites in the gorge leading to the active site and stabilizes the productive conformation of the Glu(325)/His(438)/Ser(198) catalytic triad; several long-lived water bridges are fully integrated into the architecture of the active site; the positions of the residues at the rim of the gorge region display large deviations with respect to the crystal structure; and two side doors, constituted by residues situated at the tip of the acyl- and Omega-loops, respectively, open wide enough to allow the passage of water molecules. In conclusion, we compare our theoretical results with those from previous work on mouse acetylcholinesterase and discuss their implications for substrate binding and catalysis in BuChE.     

Crystal structure of aminopeptidase N (proteobacteria alanyl aminopeptidase) from Escherichia coli and conformational change of methionine 260 involved in substrate recognition

Aminopeptidase N from Escherichia coli is a broad specificity zinc exopeptidase belonging to aminopeptidase clan MA, family M1. The structures of the ligand-free form and the enzyme-bestatin complex were determined at 1.5- and 1.6-A resolution, respectively. The enzyme is composed of four domains: an N-terminal beta-domain (Met(1)-Asp(193)), a catalytic domain (Phe(194)-Gly(444)), a middle beta-domain (Thr(445)-Trp(546)), and a C-terminal alpha-domain (Ser(547)-Ala(870)). The structure of the catalytic domain exhibits similarity to thermolysin, and a metal-binding motif (HEXXHX(18)E) is found in the domain. The zinc ion is coordinated by His(297), His(301), Glu(320), and a water molecule. The groove on the catalytic domain that contains the active site is covered by the C-terminal alpha-domain, and a large cavity is formed inside the protein. However, there exists a small hole at the center of the C-terminal alpha-domain. The N terminus of bestatin is recognized by Glu(121) and Glu(264), which are located in the N-terminal and catalytic domains, respectively. Glu(298) and Tyr(381), located near the zinc ion, are considered to be involved in peptide cleavage. A difference revealed between the ligand-free form and the enzyme-bestatin complex indicated that Met(260) functions as a cushion to accept substrates with different N-terminal residue sizes, resulting in the broad substrate specificity of this enzyme.     

Active site specificity of plasmepsin II.

Members of the aspartic proteinase family of enzymes have very similar three-dimensional structures and catalytic mechanisms. Each, however, has unique substrate specificity. These distinctions arise from variations in amino acid residues that line the active site subsites and interact with the side chains of the amino acids of the peptides that bind to the active site. To understand the unique binding preferences of plasmepsin II, an enzyme of the aspartic proteinase class from the malaria parasite, Plasmodium falciparum, chromogenic octapeptides having systematic substitutions at various positions in the sequence were analyzed. This enabled the design of new, improved substrates for this enzyme (Lys-Pro-Ile-Leu-Phe*Nph-Ala/Glu-Leu-Lys, where * indicates the cleavage point). Additionally, the crystal structure of plasmepsin II was analyzed to explain the binding characteristics. Specific amino acids (Met13, Ser77, and Ile287) that were suspected of contributing to active site binding and specificity were chosen for site-directed mutagenesis experiments. The Met13Glu and Ile287Glu single mutants and the Met13Glu/Ile287Glu double mutant gain the ability to cleave substrates containing Lys residues.     

Crystal structure of the E230Q mutant of cAMP-dependent protein kinase reveals an unexpected apoenzyme conformation and an extended N-terminal A helix

Glu230, one of the acidic residues that cluster around the active site of the catalytic subunit of cAMP-dependent protein kinase, plays an important role in substrate recognition. Specifically, its side chain forms a direct salt-bridge interaction with the substrate's P-2 Arg. Previous studies showed that mutation of Glu230 to Gln (E230Q) caused significant decreases not only in substrate binding but also in the rate of phosphoryl transfer. To better understand the importance of Glu230 for structure and function, we solved the crystal structure of the E230Q mutant at 2.8 A resolution. Surprisingly, the mutant preferred an open conformation with no bound ligands observed, even though the crystals were grown in the presence of MgATP and the inhibitor peptide, IP20. This is in contrast to the wild-type protein that, under the same conditions, prefers the closed conformation of a ternary complex. The structure highlights the importance of the electrostatic surface not only for substrate binding and catalysis, but also for the mechanism for closing the active site cleft. This surface mutation clearly disrupts the recognition and binding of substrate peptide so that the enzyme prefers an open conformation that cannot trap ATP. This is consistent with the reinforcing concepts of conformational dynamics and the synergistic binding of ATP and substrate peptide. Another unusual feature of the structure is the observation of the entire N terminus (Gly1-Thr32) assumes an extended alpha-helix conformation. Finally, based on temperature factors, this mutant structure is more stable than the wild-type C-subunit in the apo state.     

Molecular dynamics simulation of the processive endocellulase Cel48F from Clostridium cellulolyticum: a novel “water‐control mechanism” in enzymatic hydrolysis of cellulose

Glycoside hydrolase of Cel48F from Clostridium cellulolyticum is an important processive cellulose, which can hydrolyze cellulose into cellobiose. Molecular dynamics simulations were used to investigate the hydrolysis mechanism of cellulose. The two conformations of the Cel48F‐cellotetrose complex in which the cellotetroses are bound at different sites (known as the sliding conformation and the hydrolyzing conformation) were simulated. By comparing these two conformations, a water‐control mechanism is proposed, in which the hydrolysis proceeds by providing a water molecule for every other glucosidic linkage. The roles of certain key residues are determined: Glu55 and Asp230 are the most probable candidates for acid and base, respectively, in the mechanism of inverting anomeric carbon. Met414 and Trp417 constitute the water‐control system. Glu44 might keep the substrate at a certain location within the active site or help the substrate chain to move from the sliding conformation to the hydrolyzing conformation. The other hydrophobic residues around the substrate can decrease the sliding energy barrier or provide a hydrophobic environment to resist entry of the surrounding water molecules into the active site, except for those coming from a specific water channel. Copyright © 2014 John Wiley & Sons, Ltd.     

The 3''-5'' exonuclease of DNA polymerase I of Escherichia coli: contribution of each amino acid at the active site to the reaction.

We have used site-directed mutagenesis to change amino acid side chains that have been shown crystallographically to be in close proximity to a DNA 3' terminus bound at the 3'-5' exonuclease active site of Klenow fragment. Exonuclease assays of the resulting mutant proteins indicate that the largest effects on exonuclease activity result from mutations in a group of carboxylate side chains (Asp355, Asp424 and Asp501) anchoring two divalent metal ions that are essential for exonuclease activity. Another carboxylate (Glu357) within this cluster seems to be less important as a metal ligand, but may play a separate role in catalysis of the exonuclease reaction. A second group of residues (Leu361, Phe473 and Tyr497), located around the terminal base and ribose positions, plays a secondary role, ensuring correct positioning of the substrate in the active site and perhaps also facilitating melting of a duplex DNA substrate by interacting with the frayed 3' terminus. The pH-dependence of the 3'-5' exonuclease reaction is consistent with a mechanism in which nucleophilic attack on the terminal phosphodiester bond is initiated by a hydroxide ion coordinated to one of the enzyme-bound metal ions.     

Discovery of the ammonium substrate site on glutamine synthetase, a third cation binding site.

Glutamine synthetase (GS) catalyzes the ATP-dependent condensation of ammonia and glutamate to yield glutamine, ADP, and inorganic phosphate in the presence of divalent cations. Bacterial GS is an enzyme of 12 identical subunits, arranged in two rings of 6, with the active site between each pair of subunits in a ring. In earlier work, we have reported the locations within the funnel-shaped active site of the substrates glutamate and ATP and of the two divalent cations, but the site for ammonia (or ammonium) has remained elusive. Here we report the discovery by X-ray crystallography of a binding site on GS for monovalent cations, Tl+ and Cs+, which is probably the binding site for the substrate ammonium ion. Fourier difference maps show the following. (1) Tl+ and Cs+ bind at essentially the same site, with ligands being Glu 212, Tyr 179, Asp 50', Ser 53' of the adjacent subunit, and the substrate glutamate. From its position adjacent to the substrate glutamate and the cofactor ADP, we propose that this monovalent cation site is the substrate ammonium ion binding site. This proposal is supported by enzyme kinetics. Our kinetic measurements show that Tl+, Cs+, and NH4+ are competitive inhibitors to NH2OH in the gamma-glutamyl transfer reaction. (2) GS is a trimetallic enzyme containing two divalent cation sites (n1, n2) and one monovalent cation site per subunit. These three closely spaced ions are all at the active site: the distance between n1 and n2 is 6 A, between n1 and Tl+ is 4 A, and between n2 and Tl+ is 7 A. Glu 212 and the substrate glutamate are bridging ligands for the n1 ion and Tl+. (3) The presence of a monovalent cation in this site may enhance the structural stability of GS, because of its effect of balancing the negative charges of the substrate glutamate and its ligands and because of strengthening the "side-to-side" intersubunit interaction through the cation-protein bonding. (4) The presence of the cofactor ADP increases the Tl+ binding to GS because ADP binding induces movement of Asp 50' toward this monovalent cation site, essentially forming the site. This observation supports a two-step mechanism with ordered substrate binding: ATP first binds to GS, then Glu binds and attacks ATP to form gamma-glutamyl phosphate and ADP, which complete the ammonium binding site. The third substrate, an ammonium ion, then binds to GS, and then loses a proton to form the more active species ammonia, which attacks the gamma-glutamyl phosphate to yield Gln. (5) Because the products (Glu or Gln) of the reactions catalyzed by GS are determined by the molecule (water or ammonium) attacking the intermediate gamma-glutamyl phosphate, this negatively charged ammonium binding pocket has been designed naturally for high affinity of ammonium to GS, permitting glutamine synthesis to proceed in aqueous solution.     

Structural analyses of a malate dehydrogenase with a variable active site

Malate dehydrogenase specifically oxidizes malate to oxaloacetate. The specificity arises from three arginines in the active site pocket that coordinate the carboxyl groups of the substrate and stabilize the newly forming hydroxyl/keto group during catalysis. Here, the role of Arg-153 in distinguishing substrate specificity is examined by the mutant R153C. The x-ray structure of the NAD binary complex at 2.1 A reveals two sulfate ions bound in the closed form of the active site. The sulfate that occupies the substrate binding site has been translated approximately 2 A toward the opening of the active site cavity. Its new location suggests that the low catalytic turnover observed in the R153C mutant may be due to misalignment of the hydroxyl or ketone group of the substrate with the appropriate catalytic residues. In the NAD.pyruvate ternary complex, the monocarboxylic inhibitor is bound in the open conformation of the active site. The pyruvate is coordinated not by the active site arginines, but through weak hydrogen bonds to the amide backbone. Energy minimized molecular models of unnatural analogues of R153C (Wright, S. K., and Viola, R. E. (2001) J. Biol. Chem. 276, 31151-31155) reveal that the regenerated amino and amido side chains can form favorable hydrogen-bonding interactions with the substrate, although a return to native enzymatic activity is not observed. The low activity of the modified R153C enzymes suggests that precise positioning of the guanidino side chain is essential for optimal orientation of the substrate.     

Human liver alanine aminopeptidase. Inhibition by amino acids.

Human liver alanine aminopeptidase is inhibited by L-amino acids having hydrophobic side chains such as Phe, Tyr, Trp, Met, and Leu. Blocking of the amino group or the carboxyl group greatly reduces the inhibitory capacity of the amino acid. Kinetic studies demonstrate that inhibition of hydrolysis of the substrate L-Ala-beta-naphthylamide is of the noncompetitive type. Inhibition of the substrate L-Leu-L-Leu is of the mixed type. Inhibition of the substrate L-Ala-L-Ala-L-Ala is of the competitive type. These changes in the mechanism of inhibition are thought to be the result of the binding of the amino acid to the third residue binding site on the enzyme. This is the part of the active center to which the third residue from the amino end of a peptide substrate is normally bound. The inhibitor constants of several alanine oligopeptides are shown to decrease with increasing length through L-Ala-L-Ala-L-Ala-L-Ala, demonstrating that alanine aminopeptidase is a multisited enzyme with three and possibly four residue sites per active center. The inhibitor constant for Gly-Gly--Phe suggesting that indeed the third residue site preferentially binds large hydrophobic residues.     

Role of Phe283 in enzymatic reaction of cyclodextrin glycosyltransferase from alkalophilic Bacillus sp.1011: Substrate binding and arrangement of the catalytic site

Cyclodextrin glycosyltransferase (CGTase) belonging to the alpha-amylase family mainly catalyzes transglycosylation and produces cyclodextrins from starch and related alpha-1,4-glucans. The catalytic site of CGTase specifically conserves four aromatic residues, Phe183, Tyr195, Phe259, and Phe283, which are not found in alpha-amylase. To elucidate the structural role of Phe283, we determined the crystal structures of native and acarbose-complexed mutant CGTases in which Phe283 was replaced with leucine (F283L) or tyrosine (F283Y). The temperature factors of the region 259-269 in native F283L increased >10 A(2) compared with the wild type. The complex formation with acarbose not only increased the temperature factors (>10 A(2)) but also changed the structure of the region 257-267. This region is stabilized by interactions of Phe283 with Phe259 and Leu260 and plays an important role in the cyclodextrin binding. The conformation of the side-chains of Glu257, Phe259, His327, and Asp328 in the catalytic site was altered by the mutation of Phe283 with leucine, and this indicates that Phe283 partly arranges the structure of the catalytic site through contacts with Glu257 and Phe259. The replacement of Phe283 with tyrosine decreased the enzymatic activity in the basic pH range. The hydroxyl group of Tyr283 forms hydrogen bonds with the carboxyl group of Glu257, and the pK(a) of Glu257 in F283Y may be lower than that in the wild type.