Selectivity of tryptophan residues in mediating photolysis of disulfide bridges in goat alpha-lactalbumin

Goat alpha-lactalbumin (GLA) contains four tryptophan (Trp) residues and four disulfide bonds. Illumination with near-UV light results in the cleavage of disulfide bridges and in the formation of free thiols. To obtain information about the reaction products, the illuminated protein was carbamidomethylated and digested with trypsin and the peptides were analyzed by mass spectrometry. Peptides containing Cys120Cam, Cys61Cam, or Cys91Cam were detected, as well as two peptides containing a new Cys-Lys cross-link. In one, Cys6 was cross-linked to Lys122, while the cross-link in the second was either a Cys91-Lys79 or Cys73-Lys93 cross-link; however, the exact linkage could not be defined. The results demonstrate photolytic cleavage of the Cys6-Cys120, Cys61-Cys77, and Cys73-Cys91 disulfide bonds. While photolysis of Cys6-Cys120 and Cys73-Cys91 disulfide bonds in GLA has been reported, cleavage of the Cys61-Cys77 disulfide bonds has not been previously detected. To examine the contribution of the individual Trp residues, we constructed the GLA mutants, W26F, W60F, W104F, and W118F, by replacing single Trp residues with phenylalanine (Phe). The substitution of each Trp residue led to less thiol production compared to that for wild-type GLA, showing that each Trp residue in GLA contributed to the photolytic cleavage of disulfide bridges. The specificity was expressed by the nature of the reaction products. No cleavage of the Cys6-Cys120 disulfide bridge was detected when the W26F mutant was illuminated, and no cleavage of the Cys73-Cys91 disulfide bridge was seen following illumination of W26F or W104F. In contrast, Cys61Cam, resulting from the cleavage of the Cys61-Cys77 disulfide bridge, was found following illumination of any of the mutants.     

Structural stability of human alpha-thrombin studied by disulfide reduction and scrambling

Human alpha-thrombin is a very important plasma serine protease, which is involved in physiologically vital processes like hemostasis, thrombosis, and activation of platelets. Knowledge regarding the structural stability of alpha-thrombin is essential for understanding its biological regulation. Here, we investigated the structural and conformational stability of alpha-thrombin using the techniques of disulfide reduction and disulfide scrambling. alpha-Thrombin is composed of a light A-chain (36 residues) and a heavy B-chain (259 residues) linked covalently by an inter-chain disulfide bond (Cys(1)-Cys(122)). The B-chain is stabilized by three intra-chain disulfide bonds (Cys(42)-Cys(58), Cys(168)-Cys(182), and Cys(191)-Cys(220)) (Chymotrypsinogen nomenclature). Upon reduction with dithiothreitol (DTT), alpha-thrombin unfolded in a 'sequential' manner with sequential reduction of Cys(168)-Cys(182) within the B-chain followed by the inter-chain disulfide, generating two distinct partially reduced intermediates, I-1 and I-2, respectively. Conformational stability of alpha-thrombin was investigated by the technique of disulfide scrambling. alpha-Thrombin denatures by scrambling its native disulfide bonds in the presence of denaturant [urea, guanidine hydrochloride (GdmCl) or guanidine thiocyanate (GdmSCN)] and a thiol initiator. During the process, cleavage of the inter-chain disulfide bond and release of the A-chain from B-chain was the foremost event. The three disulfides in the B-chain subsequently scrambled to form three major isomers (designated as X-Ba, X-Bb, and X-Bc). Complete denaturation of alpha-thrombin was observed at low concentrations of denaturants (0.5 M GdmSCN, 1.5 M GdmCl, or 3 M urea) indicating low conformational stability of the protease.     

Contribution of individual disulfide bonds to the oxidative folding of ribonuclease A

The eight cysteine residues of ribonuclease A form four disulfide bonds in the native protein. We have analyzed the folding of three double RNase A mutants (C65A/C72A, C58A/C110A, and C26A/C84A, lacking the C65-C72, C58-C110, and C26-C84 disulfide bonds, respectively) and two single mutants (C110A and C26A), in which a single cysteine is replaced with an alanine and the paired cysteine is present in the reduced form. The folding of these mutants was carried out in the presence of oxidized and reduced glutathione, which constitute the main redox agents present within the ER. The use of mass spectrometry in the analysis of the folding processes allowed us (i) to follow the formation of intermediates and thus the pathway of folding of the RNase A mutants, (ii) to quantitate the intermediates that formed, and (iii) to compare the rates of formation of intermediates. By comparison of the folding kinetics of the mutants with that of wild-type RNase A, the contribution of each disulfide bond to the folding process has been evaluated. In particular, we have found that the folding of the C65A/C72A mutant occurs on the same time scale as that of the wild-type protein, thus suggesting that the removal of the C65-C72 disulfide bond has no effect on the kinetics of RNase A folding. Conversely, the C58A/C110A and C26A/C84A mutants fold much more slowly than the wild-type protein. The removal of the C58-C110 and C26-C84 disulfide bonds has a dramatic effect on the kinetics of RNase A folding. Results described in this paper provide specific information about conformational folding events in the regions involving the mutated cysteine residues, thus contributing to a better understanding of the complex mechanism of oxidative folding.     

Variants of ribonuclease inhibitor that resist oxidation

Human ribonuclease inhibitor (hRI) is a cytosolic protein that protects cells from the adventitious invasion of pancreatic-type ribonucleases. hRI has 32 cysteine residues. The oxidation of these cysteine residues to form disulfide bonds is a rapid, cooperative process that inactivates hRI. The most proximal cysteine residues in native hRI are two pairs that are adjacent in sequence: Cys94 and Cys95, and Cys328 and Cys329. A cystine formed from such adjacent cysteine residues would likely contain a perturbing cis peptide bond within its eight-membered ring, which would disrupt the structure of hRI and could facilitate further oxidation. We find that replacing Cys328 and Cys329 with alanine residues has little effect on the affinity of hRI for bovine pancreatic ribonuclease A (RNase A), but increases its resistance to oxidation by 10- to 15-fold. Similar effects are observed for the single variants, C328A hRI and C329A hRI, suggesting that oxidation resistance arises from the inability to form a Cys328-Cys329 disulfide bond. Replacing Cys94 and Cys95 with alanine residues increases oxidation resistance to a lesser extent, and decreases the affinity of hRI for RNase A. The C328A, C329A, and C328A/C329A variants are likely to be more useful than wild-type hRI for inhibiting pancreatic-type ribonucleases in vitro and in vivo. We conclude that replacing adjacent cysteine residues can confer oxidation resistance in a protein.     

A 3-disulfide mutant of mouse prion protein expression, oxidative folding, reductive unfolding, conformational stability, aggregation and isomerization

The structure of wild-type mouse prion protein mPrP(23-231) consists of two distinctive segments with approximately equal size, a disordered and flexible N-terminal domain encompassing residues 23-124 and a largely structured C-terminal domain containing about 40% of helical structure and stabilized by one disulfide bond (Cys(178)-Cys(213)). We have expressed a mPrP mutant with 4 Ala/Ser-->Cys replacements, two each at the N-(Cys(36), Cys(112)) and C-(Cys(134), Cys(169)) domains. Our specific aims are to study the interaction between N- and C-domains of mPrP during the oxidative folding and to produce stabilized isomers of mPrP for further analysis. Oxidative folding of fully reduced mutant, mPrP(6C), generates one predominant 3-disulfide isomer, designated as N-mPrP(3SS), which comprises the native disulfide (Cys(178)-Cys(213)) and two non-native disulfide bonds (Cys(36)-Cys(134) and Cys(112)-Cys(169)) that covalently connect the N- and C-domains. In comparison to wild-type mPrP(23-231), N-mPrP(3SS) exhibits an indistinguishable CD spectra, a similar conformational stability in the absence of thiol and a reduced ability to aggregate. In the presence of thiol catalyst and denaturant, N-mPrP(3SS) unfolds and generates diverse isomers that are amenable to further isolation, structural and functional analysis.     

Interchain cysteine bridges control entry of progesterone to the central cavity of the uteroglobin dimer.

The progesterone-binding protein uteroglobin has been expressed in Escherichia coli in an unfused, soluble form. Like mature uteroglobin from rabbit endometrium (UG), the E.coli produced uteroglobin (UG1) dimerizes in vitro, forms an antiparallel dimer with Cys3-Cys69' and Cys69-Cys3' disulfide bonds and binds progesterone under reducing conditions. In order to analyze the dimerization and the reduction dependence of progesterone binding in more detail, we separately replaced cysteine 3 and cysteine 69 by serines. Under reducing conditions, both uteroglobin variants (UG1-3Ser and UG1-69Ser) bind progesterone with the same affinity as the wild-type suggesting that both cysteine residues are not directly involved in progesterone binding. In contrast to the wild-type protein, both cysteine variants also bind progesterone with high affinity in the absence of reducing agents. In addition, UG1-3Ser and UG1-69Ser both form covalently linked homodimers. Thus, unnatural Cys69-69' and Cys3-3' disulfide bonds exist in UG1-3Ser and UG1-69Ser, respectively. These data together with computer models based on X-ray diffraction data strongly support the idea that progesterone reaches its binding site located in an internal hydrophobic cavity via a hydrophobic tunnel along helices 1 and 4. Under non-reducing conditions the tunnel is closed by two disulfide bridges (Cys3-Cys69' and Cys69-Cys3') that lie in the most flexible region of the dimer. Reduction or replacement of a cysteine residue enables conformational changes that open the channel allowing progesterone to enter.     

AUT凝胶电泳在牛胰核糖核酸酶折叠研究中的应用

目的:牛胰核糖核酸酶是一种用于蛋白折叠研究的经典模式蛋白,在折叠研究过程中主要使用高效液相色谱用于分离检测不同阶段的蛋白折叠中间体。高效液相色谱具有自动化、分离效果好、样品可回收等优点,同时也存在检测通量较低、仪器设备较为昂贵等不足。AUT凝胶电泳简便、快捷、检测通量较高,本文尝试将其应用于牛胰核糖核酸酶的折叠研究。方法:使用AUT凝胶电泳、酶活性检测、质谱对牛胰核糖核酸酶还原变性过程及产生的折叠中间体进行检测;通过高效液相色谱和质谱对折叠中间单体进行分离检测,并分别进行AUT凝胶电泳检测以解析各折叠中间单体在电泳中的条带位置;通过AUT凝胶电泳和酶切后质谱鉴定各折叠中间单体的二硫键配对方式。结果:AUT凝胶电泳可以有效区分不同条件下的牛胰核糖核酸酶还原变性过程,检测结果与酶活性、质谱结果相符,并可以很好地区分牛胰核糖核酸酶还原变性过程折叠中间体。高效液相色谱将牛胰核糖核酸酶还原变性过程折叠中间体分离为13个色谱峰,并与AUT凝胶电泳中的11个条带位置进行匹配。确认牛胰核糖核酸酶还原变性过程折叠中间单体的二硫键配对方式,并与AUT凝胶电泳条带进行匹配,Cys58-Cys110和Cys26-Cys84构象熵减作用强于Cys40-Cys95和Cys65-Cys72。结论:AUT凝胶电泳适用于检测牛胰核糖核酸酶折叠中间体,可以与高效液相色谱、质谱等检测技术相互补充,共同应用于牛胰核糖核酸酶的折叠研究。     

Role of disulfide bonds in goose-type lysozyme

The role of the two disulfide bonds (Cys4-Cys60 and Cys18-Cys29) in the activity and stability of goose-type (G-type) lysozyme was investigated using ostrich egg-white lysozyme as a model. Each of the two disulfide bonds was deleted separately or simultaneously by substituting both Cys residues with either Ser or Ala. No remarkable differences in secondary structure or catalytic activity were observed between the wild-type and mutant proteins. However, thermal and guanidine hydrochloride unfolding experiments revealed that the stabilities of mutants lacking one or both of the disulfide bonds were significantly decreased relative to those of the wild-type. The destabilization energies of mutant proteins agreed well with those predicted from entropic effects in the denatured state. The effects of deleting each disulfide bond on protein stability were found to be approximately additive, indicating that the individual disulfide bonds contribute to the stability of G-type lysozyme in an independent manner. Under reducing conditions, the thermal stability of the wild-type was decreased to a level nearly equivalent to that of a Cys-free mutant (C4S/C18S/C29S/C60S) in which all Cys residues were replaced by Ser. Moreover, the optimum temperature of the catalytic activity for the Cys-free mutant was downshifted by about 20 degrees C as compared with that of the wild-type. These results indicate that the formation of the two disulfide bonds is not essential for the correct folding into the catalytically active conformation, but is crucial for the structural stability of G-type lysozyme.     

Amino acid sequence and S-S bonds of Penicillium brevicompactum guanyl-specific ribonuclease

The primary structure of Penicillium brevicompactum guanyl-specific RNase was determined. The enzyme consists of 102 amino acid residues, Mr 10801. The 4 cysteine residues of the RNase are linked in pairs by disulfide bonds: Cys2-Cys10, Cys6-Cys101. P. brevicompactum RNase structure is similar to RNase T1; the degree of homology is 66%.     

Comparison of local and global stability of an analogue of a disulfide-folding intermediate with those of the wild-type protein in bovine pancreatic ribonuclease A: identification of specific regions of stable structure along the oxidative folding pathway

We have identified specific regions of the polypeptide chain of bovine pancreatic ribonuclease A (RNase A) that are critical for stabilizing the oxidative folding intermediate des-[40-95] (with three native disulfide bonds but lacking the fourth native Cys40-Cys95 disulfide bond) in an ensemble of largely disordered three-disulfide precursors (3S if des-[40-95]). A stable analogue of des-[40-95], viz., [C40A, C95A] RNase A, which contains three out of four native disulfide pairings, was previously found to have a three-dimensional structure very similar to that of the wild-type protein. However, it is determined here from GdnHCl denaturation experiments to have significantly reduced global stability, i.e., = 4.5 kcal /mol at 20 degrees C and pH 4.6. The local stability of [C40A, C95A] RNase A was also examined using site-specific amide (2)H/(1)H exchange measurements at pD 5.0 to determine the individual unfolding free energy of specific residues under both strongly native (12 degrees C) and more destabilizing (20 degrees C) conditions. Comparison of the relative stabilities at specific amide sites of [C40A, C95A] RNase A at both temperatures with the corresponding values for the wild-type protein at 35 degrees C corroborates previous experimental evidence that unidentified intramolecular contacts in the vicinity of the preferentially formed native one-disulfide (C65-C72) loop are crucial for stabilizing early folding intermediates, leading to des-[40-95]. Moreover, values of for residues at or near the third alpha-helix, and in part of the second beta-sheet of [C40A, C95A] RNase A, indicate that these two regions of regular backbone structure contribute to stabilizing the global chain fold of the des-[40-95] disulfide-folding intermediate in the wild-type protein. More significantly, we have identified numerous specific residues in the first alpha-helix and the first beta-sheet of the protein that are stabilized in the final step of the major oxidative regeneration pathway of RNase A (des-[40-95] --> N).     

Identification of the disulfide bonds in the recombinant somatomedin B domain of human vitronectin

The NH(2)-terminal somatomedin B (SMB) domain (residues 1-44) of human vitronectin contains eight Cys residues organized into four disulfide bonds and is required for the binding of type 1 plasminogen activator inhibitor (PAI-1). In the present study, we map the four disulfide bonds in recombinant SMB (rSMB) and evaluate their functional importance. Active rSMB was purified from transformed Escherichia coli by immunoaffinity chromatography using a monoclonal antibody that recognizes a conformational epitope in SMB (monoclonal antibody 153). Plasmon surface resonance (BIAcore) and competitive enzyme-linked immunosorbent assays demonstrate that the purified rSMB domain and intact urea-activated vitronectin have similar PAI-1 binding activities. The individual disulfide linkages present in active rSMB were investigated by CNBr cleavage, partial reduction and S-alkylation, mass spectrometry, and protein sequencing. Two pairs of disulfide bonds at the NH(2)-terminal portion of active rSMB were identified as Cys(5)-Cys(9) and Cys(19)-Cys(21). Selective reduction/S-alkylation of these two disulfide linkages caused the complete loss of PAI-1 binding activity. The other two pairs of disulfide bonds in the COOH-terminal portion of rSMB were identified as Cys(25)-Cys(31) and Cys(32)-Cys(39) by protease-generated peptide mapping of partially reduced and S-alkylated rSMB. These results suggest a linear uncrossed pattern for the disulfide bond topology of rSMB that is distinct from the crossed pattern present in most small disulfide bond-rich proteins.     

Conformational stability is a determinant of ribonuclease A cytotoxicity

Onconasetrade mark, a homolog of bovine pancreatic ribonuclease A (RNase A) with high conformational stability, is cytotoxic and has efficacy as a cancer chemotherapeutic agent. Unlike wild-type RNase A, the G88R variant is toxic to cancer cells. Here, variants in which disulfide bonds were removed from or added to G88R RNase A were used to probe the relationship between conformational stability and cytotoxicity in a methodical manner. The conformational stability of the C40A/G88R/C95A and C65A/C72A/G88R variants is less than that of G88R RNase A. In contrast, a new disulfide bond that links the N and C termini (residues 4 and 118) increases the conformational stability of G88R RNase A and C65A/C72A/G88R RNase A. These changes have little effect on the ribonucleolytic activity of the enzyme or on its ability to evade the cytosolic ribonuclease inhibitor protein. The changes do, however, have a substantial effect on toxicity toward human erythroleukemia cells. Specifically, conformational stability correlates directly with cytotoxicity as well as with resistance to proteolysis. These data indicate that conformational stability is a key determinant of RNase A cytotoxicity and suggest that cytotoxicity relies on avoiding proteolysis. This finding suggests a means to produce new cancer chemotherapeutic agents based on mammalian ribonucleases.     

Heparin binding domain of human antithrombin III inferred from the sequential reduction of its three disulfide linkages. An efficient method for structural analysis of partially reduced proteins

Human antithrombin III (AT-III) was partially reduced under mild conditions in the absence or presence of low molecular weight heparin. Quantitation of reduced disulfide bonds was facilitated by the application of a water-soluble color reagent, 4-N,N-dimethylaminoazobenzene-4'-iodoacetamido-2'-sulfonic acid (S-DABIA). The study shows that the three disulfide linkages of AT-III can be sequentially reduced, with Cys8-Cys128 being the most sensitive, followed by Cys21-Cys95, while Cys247-Cys430 is the most resistant to the mild reduction conditions. The rate of reduction of Cys8-Cys128 and Cys21-Cys95 was significantly decreased in the presence of heparin. The reduction of Cys8-Cys128 was also found to correlate quantitatively with the loss of heparin-accelerated antithrombin activity, heparin binding affinity, and heparin-induced fluorescence enhancement. These results suggest that Cys8-Cys128 is required for the integrity of the heparin binding domain of AT-III and support previous findings that lysyl residues surrounding Cys128 (Lys107, Lys114, Lys125, and Lys136) constitute an important part of the heparin binding site in AT-III.     

Role of disulphide bonds in a thermophilic serine protease aqualysin I from Thermus aquaticus YT-1

A thermophilic serine protease, Aqualysin I, from Thermus aquaticus YT-1 has two disulphide bonds, which are also found in a psychrophilic serine protease from Vibrio sp. PA-44 and a proteinase K-like enzyme from Serratia sp. at corresponding positions. To understand the significance of these disulphide bonds in aqualysin I, we prepared mutants C99S, C194S and C99S/C194S (WSS), in which Cys69-Cys99, Cys163-Cys194 and both of these disulphide bonds, respectively, were disrupted by replacing Cys residues with Ser residues. All mutants were expressed stably in Escherichia coli. The C99S mutant was 68% as active as the wild-type enzyme at 40 degrees C in terms of k(cat) value, while C194S and WSS were only 6 and 3%, respectively, as active, indicating that disulphide bond Cys163-Cys194 is critically important for maintaining proper catalytic site conformation. Mutants C194S and WSS were less thermostable than wild-type enzyme, with a half-life at 90 degrees C of 10 min as compared to 45 min of the latter and with transition temperatures on differential scanning calorimetry of 86.7 degrees C and 86.9 degrees C, respectively. Mutant C99S was almost as stable as the wild-type aqualysin I. These results indicate that the disulphide bond Cys163-Cys194 is more important for catalytic activity and conformational stability of aqualysin I than Cys67-Cys99.     

Essential cysteine residues for human RNase κ catalytic activity

Human RNase κ is an endoribonuclease expressed in almost all tissues and organs and belongs to a highly conserved protein family bearing representatives in all metazoans. To gain insight into the role of cysteine residues in the enzyme activity or structure, a recombinant active form of human RNase κ expressed in Pichia pastoris was treated with alkylating agents and dithiothreitol (DTT). Our results showed that the human enzyme is inactivated by DDT, while it remains fully active in the presence of alkylating agents. The unreduced recombinant protein migrates on SDS/PAGE faster than the reduced form. This observation in combination with the above findings indicated that human RNase κ does not form homodimers through disulfide bridges, and cysteine residues are not implicated in RNA catalysis but participate in the formation of intramolecular disulfide bond(s) essential for its ribonucleolytic activity. The role of the cysteine residues was further investigated by expression and study of Cys variants. Ribonucleolytic activity experiments and SDS/PAGE analysis of the wild-type and mutant proteins under reducing and non-reducing conditions demonstrated that Cys7, Cys14 and Cys85 are not essential for RNase activity. On the other hand, replacement of Cys6 or Cys69 with serine led to a complete loss of catalytic activity, indicating the necessity of these residues for maintaining an active conformation of human RNase κ by forming a disulfide bond. Due to the absolute conservation of these cysteine residues, the Cys6-Cys69 disulfide bond is likely to exist in all RNase κ family members.     

Primary structure and disulfide bridge location of arrowhead double-headed proteinase inhibitors.

Two arrowhead proteinase inhibitors (inhibitors A and B) were characterized and their primary structures were determined. Both inhibitors A and B are double-headed and multifunctional protease inhibitors. Inhibitor A inhibits an equimolar amount of trypsin and chymotrypsin simultaneously and weakly inhibits kallikrein. Inhibitor B inhibits two molecules of trypsin simultaneously and inhibits kallikrein more strongly than does inhibitor A. The amino acid sequences of inhibitors A and B were determined by sequencing the reduced and S-carboxamidomethylated proteins and their peptides produced by cyanogen bromide or proteolytic lysylendopeptidase or Staphylococcus aureus V8 protease cleavage. Inhibitors A and B consist of 150 amino acid residues with three disulfide bonds (Cys 43-Cys 89, Cys 110-Cys 119, and Cys 112-Cys 115) and share 90% sequence identity, with 13 different residues. Since the primary structures are totally different from those of all other serine protease inhibitors so far known, these inhibitors might be classified into a new protease inhibitor family.     

Primary structure of the major pepsin inhibitor from the intestinal parasitic nematode Ascaris suum

The major pepsin inhibitor from Ascaris suum was isolated by affinity chromatography and chromatofocusing. Its amino acid sequence was determined by automated Edman degradation of peptide fragments. Peptides were produced by chemical and enzymatic cleavage of pyridylethylated protein and were purified by reverse-phase high-performance liquid chromatography. The inhibitor consists of 149 residues with the following sequence: QFLFSMSTGP10FICTVKDNQV20FVANLPWTML30EGDDIQVGKE40 FAARVEDCTN50VKHDMAPTCT60KPPPFCGPQD70MKMFNFVGCS80VLGNKLFIDQ90KYVRDLTAK D100 HAEVQTFREK110IAAFEEQQEN120QPPSSGMPHG130AVPAGGLSPP140PPPSFCTVQ149. It has a molecular weight of 16,396. All cysteines are engaged as disulfide bonds: Cys(13)-Cys(59), Cys(48)-Cys(66), and Cys(79)-Cys(146). The protein is probably composed of two domains connected by a short hydrophobic region. This is the first aspartyl protease inhibitor of animal origin that has been sequenced. The sequence has no significant homology with any other known protein.     

Solution structure and backbone dynamics of the reduced form and an oxidized form of E. coli methionine sulfoxide reductase A (MsrA): structural insight of the MsrA catalytic cycle

Methionine sulfoxide reductases (Msr) reduce methionine sulfoxide (MetSO)-containing proteins, back to methionine (Met). MsrAs are stereospecific for the S epimer whereas MsrBs reduce the R epimer of MetSO. Although structurally unrelated, the Msrs characterized so far display a similar catalytic mechanism with formation of a sulfenic intermediate on the catalytic cysteine and a concomitant release of Met, followed by formation of at least one intramolecular disulfide bond (between the catalytic and a recycling cysteine), which is then reduced by thioredoxin. In the case of the MsrA from Escherichia coli, two disulfide bonds are formed, i.e. first between the catalytic Cys51 and the recycling Cys198 and then between Cys198 and the second recycling Cys206. Three crystal structures including E. coli and Mycobacterium tuberculosis MsrAs, which, for the latter, possesses only the unique recycling Cys198, have been solved so far. In these structures, the distances between the cysteine residues involved in the catalytic mechanism are too large to allow formation of the intramolecular disulfide bonds. Here structural and dynamical NMR studies of the reduced wild-type and the oxidized (Cys51-Cys198) forms of C86S/C206S MsrA from E. coli have been carried out. The mapping of MetSO substrate-bound C51A MsrA has also been performed. The data support (1) a conformational switch occurring subsequently to sulfenic acid formation and/or Met release that would be a prerequisite to form the Cys51-Cys198 bond and, (2) a high mobility of the C-terminal part of the Cys51-Cys198 oxidized form that would favor formation of the second Cys198-Cys206 disulfide bond.     

Entropic folding pathway of human epidermal growth factor explored by disulfide scrambling and amplified collective motion simulations

Epidermal growth factor (EGF) regulates cell proliferation and differentiation by binding to the EGF receptor (EGFR) extra-cellular domains. Human EGF is a small, single-chain protein comprising three distinct loops (A, B, and C), which are connected by three disulfide bridges (Cys6-Cys20, Cys14-Cys31, and Cys33-Cys42). These disulfide bridges are essential for structural stability and biological activity. EGF was extensively studied by disulfide scrambling, an experimental technique for the conformational entrapment of intermediate states, which allows us to study the folding pathway of proteins containing disulfide bonds. The experimental results showed that there is a major 2-disulfide intermediate (denoted EGF-II) and that the native disulfide bonding pattern is less prevalent in one of the mutants. In this article, we investigated for the first time the solution conformations of wild-type EGF, EGF-II, and the mutant S9C through extensive molecular dynamics (MD) simulations in water using both the standard MD technique and a recently developed amplified-collective-motion (ACM) sampling method. Compared to standard MD simulations, we achieved a much more enhanced sampling by the ACM simulations, and the structures were sufficiently relaxed to estimate configurational entropies. The simulation results suggest a predominantly entropic folding pathway governed by the disorder of three functional loop regions. Although EGF-II exhibits two native disulfide bonds (Cys14-Cys31 and Cys33- Cys42), its large configurational entropy inhibits a direct transition to the native structure in the folding process. When Ser9 is mutated into Cys, a non-native disulfide bridge Cys9- Cys20 is slightly more favorable than the native Cys6-Cys20 because a less constrained N-terminus affords larger entropy. Isomers that are functionally less active also exhibit a more localized dynamics of the functional loop regions, which may suggest a possible mechanism for the modulation of EGF activity.     

Study of a major intermediate in the oxidative folding of leech carboxypeptidase inhibitor: contribution of the fourth disulfide bond

The oxidative folding pathway of leech carboxypeptidase inhibitor (LCI; four disulfide bonds) proceeds through the formation of two major intermediates (III-A and III-B) that contain three native disulfide bonds and act as strong kinetic traps in the folding process. The III-B intermediate lacks the Cys19-Cys43 disulfide bond that links the beta-sheet core with the alpha-helix in wild-type LCI. Here, an analog of this intermediate was constructed by replacing Cys19 and Cys43 with alanine residues. Its oxidative folding follows a rapid sequential flow through one, two, and three disulfide species to reach the native form; the low accumulation of two disulfide intermediates and three disulfide (scrambled) isomers accounts for a highly efficient reaction. The three-dimensional structure of this analog, alone and in complex with carboxypeptidase A (CPA), was determined by X-ray crystallography at 2.2A resolution. Its overall structure is very similar to that of wild-type LCI, although the residues in the region adjacent to the mutation sites show an increased flexibility, which is strongly reduced upon binding to CPA. The structure of the complex also demonstrates that the analog and the wild-type LCI bind to the enzyme in the same manner, as expected by their inhibitory capabilities, which were similar for all enzymes tested. Equilibrium unfolding experiments showed that this mutant is destabilized by approximately 1.5 kcal mol(-1) (40%) relative to the wild-type protein. Together, the data indicate that the fourth disulfide bond provides LCI with both high stability and structural specificity.