2D [<Superscript>1</Superscript>H,<Superscript>13</Superscript>C] NMR study of carbon fluxes during glucose utilization by <Emphasis Type="Italic">Escherichia coli</Emphasis> MG1655

Carbon fluxes through main pathways of glucose utilization in Escherichia coli cells-glycolysis, pentose phosphate pathway (PPP), and Enther-Doudoroff pathway (EDP)—were studied. Their ratios were analyzed in E. coli strains MG1655, MG1655Δ(edd-eda), MG1655Δ(zwf, edd-eda), and MG1655Δ(pgi, edd-eda). It was shown that the carbon flux through glycolysis was the main route of glucose utilization, averaging ca. 80%. Inactivation of EDP did not affect growth parameters. Nevertheless, it altered carbon fluxes through the tricarboxylic acid cycles and energy metabolism in the cell. Inactivation of PPP decreased growth rate to a lesser degree than glycolysis inactivation.     

Antigenotoxic activity of biologically active substances from <Emphasis Type="Italic">Inula britannica</Emphasis> and <Emphasis Type="Italic">Limonium gmelini</Emphasis>

The antigenotoxic and antioxidant activities of biologically active substances of extracts from Inula britannica L. and Limonium gmelinii (Willd.) Kuntze in E. coli strains MG1655 (pColD-lux), MG1655 (pSoxS-lux), and MG1655 (pKatG-lux) were studied by the bioluminescent test. Plant extracts from I. britannica and L. gmelinii in all used concentrations (0.5, 5.0, 50.0, and 500.0 μg/mL) had no genotoxic or oxidant activity. The extracts statistically significantly reduced the bioluminescence intensity of the pColD-lux, pKatG-lux, and pSoxS-lux sensors (p < 0.05) induced by 4-NQO and dioxidine, hydrogen peroxide, and paraquat, respectively. The activity of the extracts depended on their concentration; the greatest antigenotoxic and antioxidant effects were detected at a concentration of 500.0 μg/mL.     

Antimicrobial properties of ternary eutectic aluminum alloys

Several Escherichia coli deletion mutants of the Keio collection were selected for analysis to better understand which genes may play a key role in copper or silver homeostasis. Each of the selected E. coli mutants had a deletion of a single gene predicted to encode proteins for homologous recombination or contained functions directly linked to copper or silver transport or transformation. The survival of these strains on pure copper surfaces, stainless steel, and alloys of aluminum, copper and/or silver was investigated. When exposed to pure copper surfaces, E. coli ΔcueO was the most sensitive, whereas E. coli ΔcopA was the most resistant amongst the different strains tested. However, we observed a different trend in sensitivities in E. coli strains upon exposure to alloys of the system Al–Ag–Cu. While minor antimicrobial effects were detected after exposure of E. coli ΔcopA and E. coli ΔrecA to Al–Ag alloys, no effect was detected after exposure to Al–Cu alloys. The release of copper ions and cell-associated copper ion concentrations were determined for E. coli ΔcopA and the wild-type E. coli after exposure to pure copper surfaces. Altogether, compared to binary alloys, ternary eutectic alloys (Al–Ag–Cu) had the highest antimicrobial effect and thus, warrant further investigation.     

Aspartic Acid Synthesis by <Emphasis Type="Italic">Escherichia coli</Emphasis> Strains with Deleted Fumarase Genes as Biocatalysts

The work reports the construction of Escherichia coli strain MG1655 derivatives with deleted genes that encode fumarases (fumAC, fumB, and fumABC) via the phage lambda-mediated recombination system. It has been demonstrated that the deletion of fumB gene had almost no effect on strain growth under aerobic conditions, while the deletion of the fumA and fumC genes led to a 30% decrease in the growth rate under the same conditions. When the E. coli strains with deleted fumarase genes were used to catalyze L-aspartic acid synthesis from ammonium fumarate (1.5 M solution), it was observed that only the simultaneous loss of both the fumA and fumC genes led to an at least 20% increase in the aspartic acid yields and a concurrent decrease in the content of the byproduct malic acid in the reaction mixture from 40 to 1.5–2 g/L. The results obtained in the work may be used to generate more efficient novel biocatalysts of L-aspartic acid synthesis.     

HflX protein protects <Emphasis Type="Italic">Escherichia coli</Emphasis> from manganese stress

The ribosome-binding GTPase HflX is required for manganese homeostasis in E. coli. While under normal conditions ?hflX cells behave like wild type E. coli with respect to growth pattern and morphology, deletion of hflX makes E. coli cells extremely sensitive to manganese, characterized by arrested cell growth and filamentation. Here we demonstrate that upon complementation by hflX, manganese stress is relieved. In phenotypic studies done in a manganese-rich environment, ?hflX cells were highly sensitive to antibiotics that bind the penicillin binding protein 3 (PBP3), suggesting that the manganese stress led to impaired peptidoglycan biosynthesis. An irregular distribution of dark bands of constriction along filaments, delocalization of the dark bands from midcell towards poles and subpoles, lack of septum formation and arrested cell division were observed in ?hflX cells under manganese stress. However, chromosome replication and segregation of nucleoids were unaffected under these conditions, as observed from confocal microscopy imaging and FACS studies. We conclude that absence of HflX leads to manganese accumulation in E. coli cells, affecting cell septum formation, probably by modulating the activity of the cell division protein PBP3 (FtsI), a major component of the divisome apparatus. We propose that HflX acts as a gatekeeper, regulating the influx of manganese into the cell.     

Vanillin Resistance Induced by BssS Overexpression in <Emphasis Type="Italic">Escherichia coli</Emphasis>

Overexpression of the BssS gene, a biofilm formation regulator, in planktonic Escherichia coli cells has been shown to confer the vanillin-resistant phenotype Van^r to the bacteria. The MG1655P_L-tac-bssS strain started growing in liquid aerated LB medium with 2 g/L vanillin after a lag phase of 17 ± 2 h, whereas the original MG1655 strain did not grow under these conditions. The role of aldehyde reductase YqhD, a vanillin- degrading enzyme, in Van^r phenotype formation has been assessed. However, the Van^r trait in the MG1655P_L-tac-bssS strain primarily depended on autoinducer-2 (AI-2), which formed in E. coli cells with an intact luxS gene. We supposed that BssS acts together with autoinducer-2 (which presumably accumulated during the prolonged lag phase) to induce vanillin resistance determined by changes in the expression of a range of genes.     

Production of caffeoylmalic acid from glucose in engineered <Emphasis Type="Italic">Escherichia coli</Emphasis>

Objectives

To achieve biosynthesis of caffeoylmalic acid from glucose in engineered Escherichia coli.

Results

We constructed the biosynthetic pathway of caffeoylmalic acid in E. coli by co-expression of heterologous genes RgTAL, HpaBC, At4CL2 and HCT2. To enhance the production of caffeoylmalic acid, we optimized the tyrosine metabolic pathway of E. coli to increase the supply of the substrate caffeic acid. Consequently, an E. coli–E. coli co-culture system was used for the efficient production of caffeoylmalic acid. The final titer of caffeoylmalic acid reached 570.1 mg/L.

Conclusions

Microbial production of caffeoylmalic acid using glucose has application potential. In addition, microbial co-culture is an efficient tool for producing caffeic acid esters.

     

Engineering the growth pattern and cell morphology for enhanced PHB production by <Emphasis Type="Italic">Escherichia coli</Emphasis>

E. coli JM109?envC?nlpD deleted with genes envC and nlpD responsible for degrading peptidoglycan (PG) led to long filamentous cell shapes. When cell fission ring location genes minC and minD of Escherichia coli were deleted, E. coli JM109?minCD changed the cell growth pattern from binary division to multiple fissions. Bacterial morphology can be further engineered by overexpressing sulA gene resulting in inhibition on FtsZ, thus generating very long cellular filaments. By overexpressing sulA in E. coli JM109?envC?nlpD and E. coli JM109?minCD harboring poly(3-hydroxybutyrate) (PHB) synthesis operon phbCAB encoded in plasmid pBHR68, respectively, both engineered cells became long filaments and accumulated more PHB compared with the wild-type. Under same shake flask growth conditions, E. coli JM109?minCD (pBHR68) overexpressing sulA grown in multiple fission pattern accumulated approximately 70 % PHB in 9 g/L cell dry mass (CDM), which was significantly higher than E. coli JM109?envC?nlpD and the wild type, that produced 7.6 g/L and 8 g/L CDM containing 64 % and 51 % PHB, respectively. Results demonstrated that a combination of the new division pattern with elongated shape of E. coli improved PHB production. This provided a new vision on the enhanced production of inclusion bodies.     

Crystal structure and functional implications of the tandem-type universal stress protein UspE from <Emphasis Type="Italic">Escherichia coli</Emphasis>

Background

The universal stress proteins (USP) family member UspE is a tandem-type USP that consists of two Usp domains. The UspE expression levels of the Escherichia coli (E. coli) become elevated in response to oxidative stress and DNA damaging agents, including exposure to mitomycin C, cadmium, and hydrogen peroxide. It has been shown that UspA family members are survival factors during cellular growth arrest. The structures and functions of the UspA family members control the growth of E. coli in animal hosts. While several UspA family members have known structures, the structure of E. coli UspE remains to be elucidated.

Results

To understand the biochemical function of UspE, we have determined the crystal structure of E. coli UspE at 3.2 Å resolution. The asymmetric unit contains two protomers related by a non-crystallographic symmetry, and each protomer contains two tandem Usp domains. The crystal structure shows that UspE is folded into a fan-shaped structure similar to that of the tandem-type Usp protein PMI1202 from Proteus mirabilis, and it has a hydrophobic cavity that binds its ligand. Structural analysis revealed that E. coli UspE has two metal ion binding sites, and isothermal titration calorimetry suggested the presence of two Cd²⁺ binding sites with a K_d value of 38.3–242.7 μM. Structural analysis suggested that E. coli UspE has two Cd²⁺ binding sites (Site I: His117, His 119; Site II: His193, His244).

Conclusion

The results show that the UspE structure has a hydrophobic pocket. This pocket is strongly bound to an unidentified ligand. Combined with a previous study, the ligand is probably related to an intermediate in lipid A biosynthesis. Subsequently, sequence analysis found that UspE has an ATP binding motif (Gly²⁶⁹- X₂-Gly²⁷²-X₉-Gly²⁸²-Asn) in its C-terminal domain, which was confirmed by in vitro ATPase activity monitored using Kinase-Glo® Luminescent Kinase Assay. However, the residues constituting this motif were disordered in the crystal structure, reflecting their intrinsic flexibility. ITC experiments revealed that the UspE probably has two Cd²⁺ binding sites. The His117, His 119, His193, and His244 residues within the β-barrel domain are necessary for Cd²⁺ binding to UspE protein. As mentioned above, USPs are associated with several functions, such as cadmium binding, ATPase function, and involvement in lipid A biosynthesis by some unknown way.

     

Dual-species biofilm of <Emphasis Type="Italic">Listeria monocytogenes</Emphasis> and <Emphasis Type="Italic">Escherichia coli</Emphasis> on stainless steel surface

Listeria monocytogenes is a Gram-positive bacterium commonly associated with foodborne diseases. Due its ability to survive under adverse environmental conditions and to form biofilm, this bacterium is a major concern for the food industry, since it can compromise sanitation procedures and increase the risk of post-processing contamination. Little is known about the interaction between L. monocytogenes and Gram-negative bacteria on biofilm formation. Thus, in order to evaluate this interaction, Escherichia coli and L. monocytogenes were tested for their ability to form biofilms together or in monoculture. We also aimed to evaluate the ability of L. monocytogenes 1/2a and its isogenic mutant strain (ΔprfA ΔsigB) to form biofilm in the presence of E. coli. We assessed the importance of the virulence regulators, PrfA and σ^B, in this process since they are involved in many aspects of L. monocytogenes pathogenicity. Biofilm formation was assessed using stainless steel AISI 304 #4 slides immersed into brain heart infusion broth, reconstituted powder milk and E. coli preconditioned medium at 25 °C. Our results indicated that a higher amount of biofilm was formed by the wild type strain of L. monocytogenes than by its isogenic mutant, indicating that prfA and sigB are important for biofilm development, especially maturation under our experimental conditions. The presence of E. coli or its metabolites in preconditioned medium did not influence biofilm formation by L. monocytogenes. Our results confirm the possibility of concomitant biofilm formation by L. monocytogenes and E. coli, two bacteria of major significance in the food industry.     

Biosynthesis of poly(2-hydroxybutyrate-co-lactate) in metabolically engineered <Emphasis Type="Italic">Escherichia coli</Emphasis>

We have previously reported in vivo biosynthesis of polyhydroxyalkanoates containing 2-hydroxyacid monomers such as lactate and 2-hydroxybutyrate in recombinant Escherichia coli strains by the expression of evolved Clostridium propionicum propionyl-CoA transferase (PctCp) and Pseudomonas sp. MBEL 6-19 polyhydroxyalkanoate (PHA) synthase 1 (PhaC1 _Ps6-19). Here, we report the biosynthesis of poly(2-hydroxybutyrate-co-lactate)[P(2HB-co-LA)] by direct fermentation of metabolically engineered E. coli strain. Among E. coli strains WL3110, XL1-Blue, and BL21(DE3), recombinant E. coli XL1-Blue strain expressing PhaC1437 and Pct540 produced P(76.4mol%2HB-co-23.6mol%LA) to the highest content of 88 wt% when it was cultured in a chemically defined medium containing 20 g/L of glucose and 2 g/L of sodium 2-hydroxybutyrate. When recombinant E. coli XL1-Blue strain expressing PhaC1437 and Pct540 was cultured in a chemically defined medium containing 20 g/L of glucose and varying concentration of sodium 2-hydroxybutyrate, 2HB monomer fraction in P(2HB-co-LA) increased proportional to the concentration of sodium 2-hydroxybutyrate added to the culture medium. P(2HB-co-LA)] could also be produced from glucose as a sole carbon source without sodium 2-hydroxybutyrate into the culture medium. Recombinant E. coli XL1-Blue strain expressing the phaC1437, pct540, cimA3.7, and leuBCD genes together with the L. lactis Il1403 panE gene, successfully produced P(23.5mol%2HB-co-76.5mol%LA)] to the polymer content of 19.4 wt% when it cultured in a chemically defined medium containing 20 g/L of glucose. The metabolic engineering strategy reported here should be useful for the production of novel copolymer P(2HB-co-LA)].     

Engineering a <Emphasis Type="Italic">Streptomyces coelicolor</Emphasis> biosynthesis pathway into <Emphasis Type="Italic">Escherichia coli</Emphasis> for high yield triglyceride production

Background

Microbial lipid production represents a potential alternative feedstock for the biofuel and oleochemical industries. Since Escherichia coli exhibits many genetic, technical, and biotechnological advantages over native oleaginous bacteria, we aimed to construct a metabolically engineered E. coli strain capable of accumulating high levels of triacylglycerol (TAG) and evaluate its neutral lipid productivity during high cell density fed-batch fermentations.

Results

The Streptomyces coelicolor TAG biosynthesis pathway, defined by the acyl-CoA:diacylglycerol acyltransferase (DGAT) Sco0958 and the phosphatidic acid phosphatase (PAP) Lppβ, was successfully reconstructed in an E. coli diacylglycerol kinase (dgkA) mutant strain. TAG production in this genetic background was optimized by increasing the levels of the TAG precursors, diacylglycerol and long-chain acyl-CoAs. For this we carried out a series of stepwise optimizations of the chassis by 1) fine-tuning the expression of the heterologous SCO0958 and lpp β genes, 2) overexpression of the S. coelicolor acetyl-CoA carboxylase complex, and 3) mutation of fadE, the gene encoding for the acyl-CoA dehydrogenase that catalyzes the first step of the β-oxidation cycle in E. coli. The best producing strain, MPS13/pET28-0958-ACC/pBAD-LPPβ rendered a cellular content of 4.85% cell dry weight (CDW) TAG in batch cultivation. Process optimization of fed-batch fermentation in a 1-L stirred-tank bioreactor resulted in cultures with an OD_600nm of 80 and a product titer of 722.1 mg TAG L^-1 at the end of the process.

Conclusions

This study represents the highest reported fed-batch productivity of TAG reached by a model non-oleaginous bacterium. The organism used as a platform was an E. coli BL21 derivative strain containing a deletion in the dgkA gene and containing the TAG biosynthesis genes from S. coelicolor. The genetic studies carried out with this strain indicate that diacylglycerol (DAG) availability appears to be one of the main limiting factors to achieve higher yields of the storage compound. Therefore, in order to develop a competitive process for neutral lipid production in E. coli, it is still necessary to better understand the native regulation of the carbon flow metabolism of this organism, and in particular, to improve the levels of DAG biosynthesis.

     

Comparison of optimal conditions for mass production of carboxymethylcellulase by <Emphasis Type="Italic">Escherichia coli</Emphasis> JM109/A-68 with other recombinants in pilot-scale bioreactor

The optimal conditions for mass production of carboxymethylcellulase (CMCase) by E. coli JM109/A-68 were investigated and compared with other E. coli JM109 recombinants producing CMCase. The optimal agitation speed and aeration rate for cell growth of E. coli JM109/A- 68 were 500 rpm and 0.50 vvm in a 7 L bioreactor, whereas those for production of CMCase were 416 rpm and 0.95 vvm. The optimal vessel pressures for cell growth as well as production of CMCase in a 100 L bioreactor were 0.04 MPa. The maximal production of CMCase by E. coli JM109/A-68 under the optimized conditions in a 100 L bioreactor was 11.0 times higher than its wild type, B. velezensis A-68. Optimal conditions for mass production of CMCase by recombinants were different from those for wild strains. The higher production of CMCase by E. coli JM109/A-68 and other recombinant of E. coli seemed to result from its higher cell growth under the optimal conditions for dissolved oxygen and its mixed-growth associated production pattern compared to the growthassociated production of B. velezensis A-68.     

Functional characterization of <Emphasis Type="Italic">Vibrio cholerae</Emphasis> O1 WbeW enzyme responsible for initial reaction in O antigen biosynthesis

Vibrio cholerae O1 employs the ATP-binding cassette (ABC) transporter-dependent pathway for O antigen biosynthesis. Different from highly studied Klebsiella pneumoniae and Escherichia coli, it was reported that initial reaction of O antigen biosynthesis in V. cholerae O1 may be involved in WbeW protein, which is predicted to be a galactosyltransferase. In this work, we report expression and characterization of WbeW enzyme. WbeW was expressed as membrane-associated form in E. coli and it was obtained with high purity. The enzyme had a function of transferring Gal-1-P from UDP-Gal to Und-P, implying that initial glycan of O antigen in V. cholerae O1 can be composed of a Gal residue.     

<Emphasis Type="Italic">Deinococcus radiodurans</Emphasis> RecX and <Emphasis Type="Italic">Escherichia coli</Emphasis> RecX proteins are capable to replace each other in vivo and in vitro

A plasmid carrying the Deinococcus radiodurans recX gene under the control of a lactose promoter decreases the Escherichia coli cell resistance to UV irradiation and γ irradiation and also influences the conjugational recombination process. The D. radiodurans RecX protein functions in the Escherichia coli cells similarly to the E. coli RecX protein. Isolated and purified D. radiodurans RecX and E. coli RecX proteins are able to replace each other interacting with the E. coli RecA and D. radiodurans RecA proteins in vitro. Data obtained demonstrated that regulatory interaction of RecA and RecX proteins preserves a high degree of conservatism despite all the differences in the recombination reparation system between E. coli and D. radiodurans.     

Conjugative plasmid transfer from <Emphasis Type="Italic">Escherichia coli</Emphasis> is a versatile approach for genetic transformation of thermophilic <Emphasis Type="Italic">Bacillus</Emphasis> and <Emphasis Type="Italic">Geobacillus</Emphasis> species

We previously demonstrated efficient transformation of the thermophile Geobacillus kaustophilus HTA426 using conjugative plasmid transfer from Escherichia coli BR408. To evaluate the versatility of this approach to thermophile transformation, this study examined genetic transformation of various thermophilic Bacillus and Geobacillus spp. using conjugative plasmid transfer from E. coli strains. E. coli BR408 successfully transferred the E. coli–Geobacillus shuttle plasmid pUCG18T to 16 of 18 thermophiles with transformation efficiencies between 4.1 × 10^?7 and 3.8 × 10^?2/recipient. Other E. coli strains that are different from E. coli BR408 in intracellular DNA methylation also generated transformants from 9 to 15 of the 18 thermophiles, including one that E. coli BR408 could not transform, although the transformation efficiencies of these strains were generally lower than those of E. coli BR408. The conjugation was performed by simple incubation of an E. coli donor and a thermophile recipient without optimization of experimental conditions. Moreover, thermophile transformants were distinguished from abundant E. coli donor only by high temperature incubation. These observations suggest that conjugative plasmid transfer, particularly using E. coli BR408, is a facile and versatile approach for plasmid introduction into thermophilic Bacillus and Geobacillus spp., and potentially a variety of other thermophiles.