Novel two‐stage fermentation process for bioethanol production using Saccharomyces pastorianus

Bioethanol produced from lignocellulosic materials has the potential to be economically feasible, if both glucose and xylose released from cellulose and hemicellulose can be efficiently converted to ethanol. Saccharomyces spp. can efficiently convert glucose to ethanol; however, xylose conversion to ethanol is a major hurdle due to lack of xylose‐metabolizing pathways. In this study, a novel two‐stage fermentation process was investigated to improve bioethanol productivity. In this process, xylose is converted into biomass via non‐Saccharomyces microorganism and coupled to a glucose‐utilizing Saccharomyces fermentation. Escherichia coli was determined to efficiently convert xylose to biomass, which was then killed to produce E. coli extract. Since earlier studies with Saccharomyces pastorianus demonstrated that xylose isomerase increased ethanol productivities on pure sugars, the addition of both E. coli extract and xylose isomerase to S. pastorianus fermentations on pure sugars and corn stover hydrolysates were investigated. It was determined that the xylose isomerase addition increased ethanol productivities on pure sugars but was not as effective alone on the corn stover hydrolysates. It was observed that the E. coli extract addition increased ethanol productivities on both corn stover hydrolysates and pure sugars. The ethanol productivities observed on the corn stover hydrolysates with the E. coli extract addition was the same as observed on pure sugars with both E. coli extract and xylose isomerase additions. These results indicate that the two‐stage fermentation process has the capability to be a competitive alternative to recombinant Saccharomyces cerevisiae‐based fermentations. © 2013 American Institute of Chemical Engineers Biotechnol. Prog., 30:300–310, 2014     

Impact of recycling stillage on conversion of dilute sulfuric acid pretreated corn stover to ethanol

Both the current corn starch to ethanol industry and the emerging lignocellulosic biofuels industry view recycling of spent fermentation broth or stillage as a method to reduce fresh water use. The objective of this study was to understand the impact of recycling stillage on conversion of corn stover to ethanol. Sugars in a dilute‐acid pretreated corn stover hydrolysate were fermented to ethanol by the glucose–xylose fermenting bacteria Zymomonas mobilis 8b. Three serial fermentations were performed at two different initial sugar concentrations using either 10% or 25% of the stillage as makeup water for the next fermentation in the series. Serial fermentations were performed to achieve near steady state concentration of inhibitors and other compounds in the corn stover hydrolysate. Little impact on ethanol yields was seen at sugar concentrations equivalent to pretreated corn stover slurry at 15% (w/w) with 10% recycle of the stillage. However, ethanol yields became progressively poorer as the sugar concentration increased and fraction of the stillage recycled increased. At an equivalent corn stover slurry concentration of 20% with 25% recycled stillage the ethanol yield was only 5%. For this microorganism with dilute‐acid pretreated corn stover, recycling a large fraction of the stillage had a significant negative impact on fermentation performance. Although this finding is of concern for biochemical‐based lignocellulose conversion processes, other microorganism/pretreatment technology combinations will likely perform differently. Biotechnol. Bioeng. 2010;105: 992–996. © 2009 Wiley Periodicals, Inc.     

Co‐hydrolysis of lignocellulosic biomass for microbial lipid accumulation

The herbaceous perennial energy crops miscanthus, giant reed, and switchgrass, along with the annual crop residue corn stover, were evaluated for their bioconversion potential. A co‐hydrolysis process, which applied dilute acid pretreatment, directly followed by enzymatic saccharification without detoxification and liquid–solid separation between these two steps was implemented to convert lignocellulose into monomeric sugars (glucose and xylose). A factorial experiment in a randomized block design was employed to optimize the co‐hydrolysis process. Under the optimal reaction conditions, corn stover exhibited the greatest total sugar yield (glucose + xylose) at 0.545 g g^?1 dry biomass at 83.3% of the theoretical yield, followed by switch grass (0.44 g g^?1 dry biomass, 65.8% of theoretical yield), giant reed (0.355 g g^?1 dry biomass, 64.7% of theoretical yield), and miscanthus (0.349 g g^?1 dry biomass, 58.1% of theoretical yield). The influence of combined severity factor on the susceptibility of pretreated substrates to enzymatic hydrolysis was clearly discernible, showing that co‐hydrolysis is a technically feasible approach to release sugars from lignocellulosic biomass. The oleaginous fungus Mortierella isabellina was selected and applied to the co‐hydrolysate mediums to accumulate fungal lipids due to its capability of utilizing both C5 and C6 sugars. Fungal cultivations grown on the co‐hydrolysates exhibited comparable cell mass and lipid production to the synthetic medium with pure glucose and xylose. These results elucidated that combining fungal fermentation and co‐hydrolysis to accumulate lipids could have the potential to enhance the utilization efficiency of lignocellulosic biomass for advanced biofuels production. Biotechnol. Bioeng. 2013; 110: 1039–1049. © 2012 Wiley Periodicals, Inc.     

Development and validation of a kinetic model for enzymatic saccharification of lignocellulosic biomass

A multireaction kinetic model was developed for closed-system enzymatic hydrolysis of lignocellulosic biomass such as corn stover. Three hydrolysis reactions were modeled, two heterogeneous reactions for cellulose breakdown to cellobiose and glucose and one homogeneous reaction for hydrolyzing cellobiose to glucose. Cellulase adsorption onto pretreated lignocellulose was modeled via a Langmuir-type isotherm. The sugar products of cellulose hydrolysis, cellobiose and glucose, as well as xylose, the dominant sugar prevalent in most hemicellulose hydrolyzates, were assumed to competitively inhibit the enzymatic hydrolysis reactions. Model parameters were estimated from experimental data generated using dilute acid pretreated corn stover as the substrate. The model performed well in predicting cellulose hydrolysis trends at experimental conditions both inside and outside the design space used for parameter estimation and can be used for in silico process optimization.     

A high-throughput transient gene expression system for switchgrass (Panicum virgatum L.) seedlings

Background

Fermentations using Escherichia coli KO11, Saccharomyces cerevisiae 424A(LNH-ST), and Zymomonas mobilis AX101 are compared side-by-side on corn steep liquor (CSL) media and the water extract and enzymatic hydrolysate from ammonia fiber expansion (AFEX)-pretreated corn stover.

Results

The three ethanologens are able produce ethanol from a CSL-supplemented co-fermentation at a metabolic yield, final concentration and rate greater than 0.42 g/g consumed sugars, 40 g/L and 0.7 g/L/h (0-48 h), respectively. Xylose-only fermentation of the tested ethanologenic bacteria are five to eight times faster than 424A(LNH-ST) in the CSL fermentation. All tested strains grow and co-ferment sugars at 15% w/v solids loading equivalent of ammonia fiber explosion (AFEX)-pretreated corn stover water extract. However, both KO11 and 424A(LNH-ST) exhibit higher growth robustness than AX101. In 18% w/w solids loading lignocellulosic hydrolysate from AFEX pretreatment, complete glucose fermentations can be achieved at a rate greater than 0.77 g/L/h. In contrast to results from fermentation in CSL, S. cerevisiae 424A(LNH-ST) consumed xylose at the greatest extent and rate in the hydrolysate compared to the bacteria tested.

Conclusions

Our results confirm that glucose fermentations among the tested strains are effective even at high solids loading (18% by weight). However, xylose consumption in the lignocellulosic hydrolysate is the major bottleneck affecting overall yield, titer or rate of the process. In comparison, Saccharomyces cerevisiae 424A(LNH-ST) is the most relevant strains for industrial production for its ability to ferment both glucose and xylose from undetoxified and unsupplemented hydrolysate from AFEX-pretreated corn stover at high yield.     

Weedy lignocellulosic feedstock and microbial metabolic engineering: advancing the generation of ‘Biofuel’

Lignocellulosic materials are the most abundant renewable organic resources (~200 billion tons annually) on earth that are readily available for conversion to ethanol and other value-added products, but they have not yet been tapped for the commercial production of fuel ethanol. The lignocellulosic substrates include woody substrates such as hardwood (birch and aspen, etc.) and softwood (spruce and pine, etc.), agro residues (wheat straw, sugarcane bagasse, corn stover, etc.), dedicated energy crops (switch grass, and Miscanthus etc.), weedy materials (Eicchornia crassipes, Lantana camara etc.), and municipal solid waste (food and kitchen waste, etc.). Despite the success achieved in the laboratory, there are limitations to success with lignocellulosic substrates on a commercial scale. The future of lignocellulosics is expected to lie in improvements of plant biomass, metabolic engineering of ethanol, and cellulolytic enzyme-producing microorganisms, fullest exploitation of weed materials, and process integration of the individual steps involved in bioethanol production. Issues related to the chemical composition of various weedy raw substrates for bioethanol formation, including chemical composition-based structural hydrolysis of the substrate, need special attention. This area could be opened up further by exploring genetically modified metabolic engineering routes in weedy materials and in biocatalysts that would make the production of bioethanol more efficient.     

Maximizing the liquid fuel yield in a biorefining process

Biorefining strives to recover the maximum value from each fraction, at minimum energy cost. In order to seek an unbiased and thorough assessment of the alleged opportunity offered by biomass fuels, the direct conversion of various lignocellulosic biomass was studied: aspen pulp wood (Populus tremuloides), aspen wood pretreated with dilute acid, aspen lignin, aspen logging residues, corn stalk, corn spathe, corn cob, corn stover, corn stover pellet, corn stover pretreated with dilute acid, and lignin extracted from corn stover. Besides the heating rate, the yield of liquid products was found to be dependent on the final liquefaction temperature and the length of liquefaction time. The major compounds of the liquid products from various origins were identified by GC-MS. The lignin was found to be a good candidate for the liquefaction process, and biomass fractionation was necessary to maximize the yield of the liquid bio-fuel. The results suggest a biorefinery process accompanying pretreatment, fermentation to ethanol, liquefaction to bio-crude oil, and other thermo-conversion technologies, such as gasification. Other biorefinery options, including supercritical water gasification and the effectual utilization of the bio-crude oil, are also addressed.     

Biological pretreatment of corn stover with Phlebia brevispora NRRL‐13108 for enhanced enzymatic hydrolysis and efficient ethanol production

Biological pretreatment of lignocellulosic biomass by white‐rot fungus can represent a low‐cost and eco‐friendly alternative to harsh physical, chemical, or physico‐chemical pretreatment methods to facilitate enzymatic hydrolysis. In this work, solid‐state cultivation of corn stover with Phlebia brevispora NRRL‐13018 was optimized with respect to duration, moisture content and inoculum size. Changes in composition of pretreated corn stover and its susceptibility to enzymatic hydrolysis were analyzed. About 84% moisture and 42 days incubation at 28°C were found to be optimal for pretreatment with respect to enzymatic saccharification. Inoculum size had little effect compared to moisture level. Ergosterol data shows continued growth of the fungus studied up to 57 days. No furfural and hydroxymethyl furfural were produced. The total sugar yield was 442 ± 5 mg/g of pretreated corn stover. About 36 ± 0.6 g ethanol was produced from 150 g pretreated stover per L by fed‐batch simultaneous saccharification and fermentation (SSF) using mixed sugar utilizing ethanologenic recombinant Eschericia coli FBR5 strain. The ethanol yields were 32.0 ± 0.2 and 38.0 ± 0.2 g from 200 g pretreated corn stover per L by fed‐batch SSF using Saccharomyces cerevisiae D5A and xylose utilizing recombinant S. cerevisiae YRH400 strain, respectively. This research demonstrates that P. brevispora NRRL‐13018 has potential to be used for biological pretreatment of lignocellulosic biomass. This is the first report on the production of ethanol from P. brevispora pretreated corn stover. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:365–374, 2017     

Lactic acid production from corn stover using mixed cultures of Lactobacillus rhamnosus and Lactobacillus brevis

Mixed cultures of Lactobacillus rhamnosus and Lactobacillus brevis was studied for improving utilization of both cellulose- and hemicellulose-derived sugars from corn stover for lactic acid production. During simultaneous saccharification and fermentation (SSF) of NaOH-treated corn stover by the mixed cultures, a lactic acid yield of 0.70 g/g was obtained, which was about 18.6% and 29.6% higher than that by single cultures of L. rhamnosus and L. brevis, respectively. Our results indicated that lactic acid yield from NaOH-pretreated corn stover by mixed cultures of L. rhamnosus and L. brevis was comparable to that from pure sugar mixtures (0.73 g/g of glucose/xylose mixture at 3:1 w/w).     

BSA treatment to enhance enzymatic hydrolysis of cellulose in lignin containing substrates

Cellulase and bovine serum albumin (BSA) were added to Avicel cellulose and solids containing 56% cellulose and 28% lignin from dilute sulfuric acid pretreatment of corn stover. Little BSA was adsorbed on Avicel cellulose, while pretreated corn stover solids adsorbed considerable amounts of this protein. On the other hand, cellulase was highly adsorbed on both substrates. Adding a 1% concentration of BSA to dilute acid pretreated corn stover prior to enzyme addition at 15 FPU/g cellulose enhanced filter paper activity in solution by about a factor of 2 and beta-glucosidase activity in solution by about a factor of 14. Overall, these results suggested that BSA treatment reduced adsorption of cellulase and particularly beta-glucosidase on lignin. Of particular note, BSA treatment of pretreated corn stover solids prior to enzymatic hydrolysis increased 72 h glucose yields from about 82% to about 92% at a cellulase loading of 15 FPU/g cellulose or achieved about the same yield at a loading of 7.5 FPU/g cellulose. Similar improvements were also observed for enzymatic hydrolysis of ammonia fiber explosion (AFEX) pretreated corn stover and Douglas fir treated by SO(2) steam explosion and for simultaneous saccharification and fermentation (SSF) of BSA pretreated corn stover. In addition, BSA treatment prior to hydrolysis reduced the need for beta-glucosidase supplementation of SSF. The results are consistent with non-specific competitive, irreversible adsorption of BSA on lignin and identify promising strategies to reduce enzyme requirements for cellulose hydrolysis.     

Effect of hemicellulose and lignin removal on enzymatic hydrolysis of steam pretreated corn stover

Ethanol can be produced from lignocellulosic biomass using steam pretreatment followed by enzymatic hydrolysis and fermentation. The sugar yields, from both hemicellulose and cellulose are critical parameters for an economically-feasible ethanol production process. This study shows that a near-theoretical glucose yield (96-104%) from acid-catalysed steam pretreated corn stover can be obtained if xylanases are used to supplement cellulases during hydrolysis. Xylanases hydrolyse residual hemicellulose, thereby improving the access of enzymes to cellulose. Under these conditions, xylose yields reached 70-74%. When pre-treatment severity was reduced by using autocatalysis instead of acid-catalysed steam pretreatment, xylose yields were increased to 80-86%. Partial delignification of pretreated material was also evaluated as a way to increase the overall sugar yield. The overall glucose yield increased slightly due to delignification but the overall xylose yield decreased due to hemicellulose loss in the delignification step. The data also demonstrate that steam pretreatment is a robust process: corn stover from Europe and North America showed only minor differences in behaviour.     

玉米秸秆酸解副产物对重组酿酒酵母6508-127发酵的影响

将木质纤维素类生物质如玉米秸秆等用稀酸水解预处理,在半纤维素水解为单糖的同时,水解液中还会产生一些可能对后续发酵有影响的副产物。本实验分别考查了在玉米秸秆稀酸水解液中检测出的乙酸、甲酸、香草醛、糠醛和羟甲基糠醛对重组木糖发酵菌株S. cerevisiae 6508-127生长和发酵的影响。结果表明,甲酸和乙酸对菌体生长的抑制强于乙醇生成,且甲酸的抑制程度远大于乙酸;2g/L香草醛可使菌体生长延滞期明显延长,而在较低浓度（≤1.2g/L）此现象不明显。糠醛在0.5-1.5g/L范围内对菌体生长有抑制作用,但使乙醇得率提高;羟甲基糠醛在0.2g/L浓度存在就使乙醇得率有明显降低,但使生物量得率提高;研究中还发现,糠醛、羟甲基糠醛和香草醛可被S. cerevisiae 6508-127代谢。     

一株葡萄糖和木糖共发酵高效产乙醇重组运动发酵单胞菌的性能评价

木糖是木质纤维素原料水解液中的第二大组分,木糖和葡萄糖的充分利用是有经济性地生产纤维素乙醇的关键。通过基因克隆手段构建了一株可以高效利用木糖产乙醇的重组运动发酵单胞菌Zymomonas mobilis TSH01,并进行了利用单糖溶液、混合糖溶液及玉米秸秆水解液发酵产乙醇效率的研究。结果表明,利用单一葡萄糖或单一木糖溶液发酵时,当糖浓度为8%、发酵72 h后,糖利用率分别为100%和98.9%,乙醇代谢收率分别为87.8%和78.3%;利用8%葡萄糖和8%木糖的混合溶液发酵时,72 h后,葡萄糖和木糖的利用率分别为98.5%和97.4%,乙醇代谢收率为94.9%。利用含3.2%葡萄糖和3.5%木糖的玉米秸秆水解液发酵72 h后,葡萄糖和木糖的利用率分别为100%和92.3%,乙醇代谢收率为91.5%。此外,磷酸二氢钾对发酵过程中木糖利用率以及乙醇收率的提高有明显促进作用。     

Photo-fermentation of Rhodobacter sphaeroides for hydrogen production using lignocellulose-derived organic acids

In this study, the corn stover was pretreated, enzymatically hydrolyzed, and then fermented in the lipid production fermentation. The corn stover fermentation effluent was utilized for the photo-fermentation of a Rhodobacter sphaeroides ZX-5 for hydrogen production. The hydrogen production was more than twofolds greater than that in the synthetic medium under the similar organic acid concentration range. The synergism among the pure organic acids was found to facilitate cell growth and hydrogen production, although some organic acid was not utilized for hydrogen production directly. The synergism among the components in the corn stover fermentation effluent was also found. The initial pH value was found to be an important parameter for the photo-fermentation of R. sphaeroide ZX-5 using the corn stover fermentation effluent. The results provided a possible way to utilize lignocellulose-derived organic acids for hydrogen production, and to treat fermentation wastewater in biofuel production using lignocellulose.     

Enhanced phenolic antioxidants production in submerged cultures of Inonotus obliquus in a ground corn stover medium

The medicinal mushroom Inonotus obliquus has been a folk remedy for a long time in East-European and Asian countries. It is currently ascribed to a number of phenolic compounds as well as triterpenoids and polysaccharides responsible for significant biological and pharmacological properties. A study was conducted to determine the effects of inclusion of lignocellulosic material, in this case corn stover on production and antioxidant activity of extracellular (EPC) and intracellular phenolic compounds (IPC) by Inonotus obliquus in submerged fermentation. The corn stover medium contained 3% ground corn stover and 3.5% corn flour but the control medium contained 5% corn flour without corn stover. All of the other components were same in the two media. Decomposition rates of cellulose, hemicellulose, and lignin in the corn stover substrate were 20.9%, 17.9%, and 19.8% through 288 h of submerged cultivation. Lignocellulose decomposition in the corn stover-containing medium yielded significantly higher EPC (118.9/135.7 mg GAE (gallic acid equivalents)) and IPC (21.2/23.7 mg GAE) than in the control medium (34.7/42.5 mg GAE of EPC and 12.5/13.5 mg GAE of IPC) per liter of culture broth (EPC) and per gram of mycelia (IPC) in shake flask cultures/10 L fermenter runs. Both EPC and IPC from the corn stover medium showed a higher scavenging activity against hydroxyl radicals and 2,2-diphenyl-1-picrylhydrazyl (DPPH) radicals than those from the control medium during the later fermentation period. In dose-dependent experiments, EPC from the corn stover medium at 216 h demonstrated a significantly stronger free radical scavenger activity against DPPH and hydroxyl radicals, shown as much lower IC50 values, than that from the control medium and IPC from the two media.     

Performance of a newly developed integrant of Zymomonas mobilis for ethanol production on corn stover hydrolysate

Efficient conversion of lignocellulosic biomass requires biocatalysts able to tolerate inhibitors produced by many pretreatment processes. Recombinant Zymomonas mobilis 8b, a recently developed integrant of Zymomonas mobilis 31821(pZB5), tolerated acetic acid up to 16 g l(-1) and achieved 82%-87% (w/w) ethanol yields from pure glucose/xylose solutions at pH 6 and temperatures of 30 degrees C and 37 degrees C. An ethanol yield of 85% (w/w) was achieved on glucose/xylose from hydrolysate produced by dilute sulfuric acid pretreatment of corn stover after an overliming' process was used to improve hydrolysate fermentability.     

Ethanolic fermentation of hydrolysates from ammonia fiber expansion (AFEX) treated corn stover and distillers grain without detoxification and external nutrient supplementation

External nutrient supplementation and detoxification of hydrolysate significantly increase the production cost of cellulosic ethanol. In this study, we investigated the feasibility of fermenting cellulosic hydrolysates without washing, detoxification or external nutrient supplementation using ethanologens Escherichia coli KO11 and the adapted strain ML01 at low initial cell density (16 mg dry weight/L). The cellulosic hydrolysates were derived from enzymatically digested ammonia fiber expansion (AFEX)-treated corn stover and dry distiller's grain and solubles (DDGS) at high solids loading (18% by weight). The adaptation was achieved through selective evolution of KO11 on hydrolysate from AFEX-treated corn stover. All cellulosic hydrolysates tested (36-52 g/L glucose) were fermentable. Regardless of strains, metabolic ethanol yields were near the theoretical limit (0.51 g ethanol/g consumed sugar). Volumetric ethanol productivity of 1.2 g/h/L was achieved in fermentation on DDGS hydrolysate and DDGS improved the fermentability of hydrolysate from corn stover. However, enzymatic hydrolysis and xylose utilization during fermentation were the bottlenecks for ethanol production from corn stover at these experimental conditions. In conclusion, fermentation under the baseline conditions was feasible. Utilization of nutrient-rich feedstocks such as DDGS in fermentation can replace expensive media supplementation.     

Optimizing harvest of corn stover fractions based on overall sugar yields following ammonia fiber expansion pretreatment and enzymatic hydrolysis

Background  

Corn stover composition changes considerably throughout the growing season and also varies between the various fractions of the plant. These differences can impact optimal pretreatment conditions, enzymatic digestibility and maximum achievable sugar yields in the process of converting lignocellulosics to ethanol. The goal of this project was to determine which combination of corn stover fractions provides the most benefit to the biorefinery in terms of sugar yields and to determine the preferential order in which fractions should be harvested. Ammonia fiber expansion (AFEX) pretreatment, followed by enzymatic hydrolysis, was performed on early and late harvest corn stover fractions (stem, leaf, husk and cob). Sugar yields were used to optimize scenarios for the selective harvest of corn stover assuming 70% or 30% collection of the total available stover.     

Production of acetone-butanol by extractive fermentation using dibutylphthalate as extractant

Extractive fermentation of glucose, glucose-xylose mixtures and hydrolysates of lignocellulosics to acetone-butanol solvents were studied and compared with similar fermentations in the absence of extractant. The extractant selected for this research was dibutylphthalate which, in addition to having satisfactory physical properties for this purpose, is non-toxic and mildly stimulating to the growth of the organism used, Clostridium acetobutylicum P262. Sugar concentrations mainly in the range of 80 to 100 g/l resulted in solvent concentrations of 28 to 30 g/l in 24 h extractive fermentations, compared to 18 to 20 g/l for non-extractive control fermentations. Conversion factors of 0.33 to 0.37 g solvents/g sugar consumed were obtained. Rapid fermentation was achieved by high cell concentrations and cell recycle from each 24 h fermentation to the succeeding similar 24 h fermentation. Somewhat higher nutrients were also helpful. By this means, 255 l of acetone-butanol solvents were obtained per tonne of aspen wood, 298 l per tonne of pine and 283 l per tonne of corn stover. Such high product yields from inexpensive substrates offer the prospect of economic viability for the process.     

Simultaneous saccharification and co-fermentation of glucose and xylose in steam-pretreated corn stover at high fiber content with Saccharomyces cerevisiae TMB3400

The two main sugars in the agricultural by-product corn stover are glucose and xylose. Co-fermentation of glucose and xylose at high content of water-insoluble solids (WIS) without detoxification is a prerequisite to obtain high ethanol concentration and to reduce production costs. A recombinant strain of Saccharomyces cerevisiae, TMB3400, was used in simultaneous saccharification and fermentation (SSF) of whole pretreated slurry of corn stover at high WIS. TMB3400 co-fermented glucose and xylose with relatively high ethanol yields giving high final ethanol concentration. The ethanol productivity increased with increasing concentration of pretreatment hydrolysate in the yeast production medium and when SSF was performed in a fed-batch mode.