首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 15 毫秒
1.
Currently, fossil materials form the majority of our energy and chemical source. Many global concerns force us to rethink about our current dependence on the fossil energy. Limiting the use of these energy sources is a key priority for most countries that pledge to reduce greenhouse gas emissions. The application of biomass, as substitute fossil resources for producing biofuels, plastics and chemicals, is a widely accepted strategy for sustainable development. Aquatic plants including algae possess competitive advantages as biomass resources compared to the terrestrial plants in this current global situation. Bio‐oil production from algal biomass is technically and economically viable, cost competitive, requires no capacious lands and minimal water use and reduces atmospheric carbon dioxide. The aim of this paper is to review the potential of converting algal biomass, as an aquatic plant, into high‐quality crude bio‐oil through applicable processes in Malaysia. In particular, bio‐based materials and fuels from algal biomass are considered as one of the reliable alternatives for clean energy. Currently, pyrolysis and hydrothermal liquefaction (HTL) are two foremost processes for bio‐oil production from biomass. HTL can directly convert high‐moisture algal biomass into bio‐oil, whereas pyrolysis requires feedstock drying to reduce the energy consumption during the process. Microwave‐assisted HTL, which can be conducted in aqueous environment, is suitable for aquatic plants and wet biomass such as algae.  相似文献   

2.
In this study, we have investigated the co‐integration and causality relationship between the biomass energy consumption and economic growth in the transition countries by the Panel Auto Regressive Distributed Lag (ARDL) method and Pedroni co‐integration analysis for 1990–2011. Analysed countries are gathered under two groups. For Groups 1 and 2, Pedroni panel co‐integration test and ARDL bound test results show that biomass energy consumption and economic growth are co‐integrated. Fully modified ordinary least squares results suggested that biomass energy consumption has positive effect on the economic growth.  相似文献   

3.
Steam gasification of grain by-products can be a significant biomass conversion technology because of the need to utilize agricultural waste for non-food applications including energy resources. The most obvious beneficiary will be the developing countries whose economies are often tied to agricultural produce and are lacking in conventional fuels. One agricultural by-product that shows promise is the rice hull; it is found in abundance in the rice mills of producer countries and is considered as a waste material. Although gasification of rice hull has been proposed as a potential waste disposal and energy recovery method, little has been done to fully realize this proposition. In the present work, data were obtained for steam gasification of rice hull in a bench-scale fluidized-bed gasifier, a technology which has proven to be feasible for other grain by-products. The produced gas, which is rich in hydrogen, has been found to have a heating value ranging between 12.1 and 11.1 MJ m−3 at the respective reactor temperatures of 700 and 800°C; energy recovery varies between 35 and 59%.  相似文献   

4.
The intensified use of biomass as an energy source is an often-repeated goal of the German and European climate protection policy. Therefore, framework conditions have been created in recent years, which allow for a wider use of biomass within the energy system especially for a provision of electricity and fuels. Due to this policy, Germany, for example, has emerged as the leading producer of biogas from energy crops and fatty methyl ester (FAME) in Europe. However, due to the high energy price level, the use of biomass for heating purposes and as a renewable raw material have increased at the same time. To supply the obviously increased demand for biomass or biobased energy carriers cost efficiently, nationwide and to some extend even global markets are under development at present. As the demand for biomass is expected to continue to increase strongly, it is feared that an increasing competition with the use for food and fodder as well as a raw material might occur in the years to come. Against this background we have analyzed the competitions that can be expected, and the influence that they may have on the further expansion of the use of biomass for energy production. Experiences from Germany are provided exemplarily. Based on this, it is concluded that measures need to be taken to support an efficient and sustainable use of bioenergy in the future.  相似文献   

5.
Background, aim and scope  The interest in the use of biomass as a renewable energy resource has rapidly grown over the past few years. In Singapore, biomass resources are mostly from waste wood. This article presents a few technological options, namely carbonization, for the conversion of woody biomass into a solid fuel, charcoal. Materials and methods  In the first stage, a life cycle assessment (LCA) ‘gate-to-gate’ system was developed for a conventional carbonizer system, a modern carbonizer from Japan, and a proposed four-stage partial furnace carbonizer from Tunisia. The potential environmental impacts were generated for global warming potential, acidification, human toxicity and photochemical oxidant potential. Based on the first set of results, the second LCA investigation was carried out comparing the selected carbonizer from Japan and an existing incinerator in Singapore. The second LCA adopted a unique approach combining social costs of pollution with the economic factors of the two biomass conversion technologies. Results  The carbonizer from Japan resulted in approximately 85% less greenhouse gases than the conventional carbonization system and 54% less than the proposed four-stage carbonizer from Tunisia. In terms of acidification and human toxicity, the carbonizers from Japan and Tunisia display nearly similar results—both were considerably lower than the conventional carbonizer. For photochemical oxidant potential, very minimal emissions are generated from the four-stage carbonizer and nearly zero impact is realized for the carbonization technology from Japan. Discussion  From the first set of LCA results, the Japanese carbonizer is favored in terms of its environmental results. The highest environmental impacts from the conventional carbonizer were due to large and uncontrolled emissions of acidic gases, greenhouse gases (particularly CO2 and CH4), particulates, and non-methane volatile organic compounds from both fugitive sources and energy requirements. The second LCA addressed the performance of the carbonizer from Japan against an existing incinerator in terms of environmental as well as cost performances. This unique approach translated pollution emissions into monetary costs to highlight the impacts of social health. Conclusions  For the first LCA, the accumulated impacts from the Japanese carbonizer proved to display significantly lower environmental impacts, especially for global warming potential. The overall environmental performance of the four-stage carbonizer from Tunisia ranked slightly lower than the one from Japan and much higher than the conventional carbonizer. The second LCA results displayed a noteworthy improvement of 90% for human health from the modern Japanese carbonizer technology—when compared against conventional incinerators. Without considering health issues or social costs, the total value per ton of wood treated is nearly similar for both incinerator and carbonizer. Recommendations and perspectives  The interest in biomass as raw material for producing energy has emerged rapidly in many countries. However, careful analysis and comparison of technologies are necessary to ensure favorable environmental outcomes. A full life cycle study, along with costs and the impact of pollution on society, should be performed before any large-scale biomass conversion technology is implemented. LCA can be applied to quantify and verify the overall environmental performance of a particular technology of interest as well as further explore the proposed technology in terms of costs and social implications.  相似文献   

6.
Today, biomass covers about 10% of the world’s primary energy demand. Against a backdrop of rising crude oil prices, depletion of resources, political instability in producing countries and environmental challenges, besides efficiency and intelligent use, only biomass has the potential to replace the supply of an energy hungry civilisation. Plant biomass is an abundant and renewable source of energy-rich carbohydrates which can be efficiently converted by microbes into biofuels, of which, only bioethanol is produced on an industrial scale today. Biomethane is produced on a large scale, but is not yet utilised for transportation. Biobutanol is on the agenda of several companies and may be used in the near future as a supplement for gasoline, diesel and kerosene, as well as contributing to the partially biological production of butyl-t-butylether, BTBE as does bioethanol today with ETBE. Biohydrogen, biomethanol and microbially made biodiesel still require further development. This paper reviews microbially made biofuels which have potential to replace our present day fuels, either alone, by blending, or by chemical conversion. It also summarises the history of biofuels and provides insight into the actual production in various countries, reviewing their policies and adaptivity to the energy challenges of foreseeable future.  相似文献   

7.
Under the current accounting systems, emissions produced when biomass is burnt for energy are accounted as zero, resulting in what is referred to as the ‘carbon neutrality’ assumption. However, if current harvest levels are increased to produce more bioenergy, carbon that would have been stored in the biosphere might be instead released in the atmosphere. This study utilizes a comparative approach that considers emissions under alternative energy supply options. This approach shows that the emission benefits of bioenergy compared to use of fossil fuel are time‐dependent. It emerges that the assumption that bioenergy always results in zero greenhouse gas (GHG) emissions compared to use of fossil fuels can be misleading, particularly in the context of short‐to‐medium term goals. While it is clear that all sources of woody bioenergy from sustainably managed forests will produce emission reductions in the long term, different woody biomass sources have various impacts in the short‐medium term. The study shows that the use of forest residues that are easily decomposable can produce GHG benefits compared to use of fossil fuels from the beginning of their use and that biomass from dedicated plantations established on marginal land can be carbon neutral from the beginning of its use. However, the risk of short‐to‐medium term negative impacts is high when additional fellings are extracted to produce bioenergy and the proportion of felled biomass used for bioenergy is low, or when land with high C stocks is converted to low productivity bioenergy plantations. The method used in the study provides an instrument to identify the time‐dependent pattern of emission reductions for alternative bioenergy sources. In this way, decision makers can evaluate which bioenergy options are most beneficial for meeting short‐term GHG emission reduction goals and which ones are more appropriate for medium to longer term objectives.  相似文献   

8.
Hydrodynamic cavitation (HC) is a process technology with potential for application in different areas including environmental, food processing, and biofuels production. Although HC is an undesirable phenomenon for hydraulic equipment, the net energy released during this process is enough to accelerate certain chemical reactions. The application of cavitation energy to enhance the efficiency of lignocellulosic biomass pretreatment is an interesting strategy proposed for integration in biorefineries for the production of bio-based products. Moreover, the use of an HC-assisted process was demonstrated as an attractive alternative when compared to other conventional pretreatment technologies. This is not only due to high pretreatment efficiency resulting in high enzymatic digestibility of carbohydrate fraction, but also, by its high energy efficiency, simple configuration, and construction of systems, besides the possibility of using on the large scale. This paper gives an overview regarding HC technology and its potential for application on the pretreatment of lignocellulosic biomass. The parameters affecting this process and the perspectives for future developments in this area are also presented and discussed.  相似文献   

9.
The main feedstocks for bioethanol are sugarcane (Saccharum officinarum) and maize (Zea mays), both of which are C(4) grasses, highly efficient at converting solar energy into chemical energy, and both are food crops. As the systems for lignocellulosic bioethanol production become more efficient and cost effective, plant biomass from any source may be used as a feedstock for bioethanol production. Thus, a move away from using food plants to make fuel is possible, and sources of biomass such as wood from forestry and plant waste from cropping may be used. However, the bioethanol industry will need a continuous and reliable supply of biomass that can be produced at a low cost and with minimal use of water, fertilizer and arable land. As many C(4) plants have high light, water and nitrogen use efficiency, as compared with C(3) species, they are ideal as feedstock crops. We consider the productivity and resource use of a number of candidate plant species, and discuss biomass 'quality', that is, the composition of the plant cell wall.  相似文献   

10.
Despite claims that microalgal biofuels are environmentally friendlier alternatives to conventional fuels, debate surrounding its ecological benefits or drawbacks still exists. LCA is used to analyze various biofuel production technologies from ‘cradle to gate’. Energy and CO2 balances are carried out for a hypothetical integrated PBR-raceway microalgae-to-biodiesel production in Singapore. Based on a functional unit of 1 MJ biofuel, the total energy demands are 4.44 MJ with 13% from biomass production, 85% from lipid extraction, and 2% from biodiesel production. Sensitivity analysis was carried out for adjustments in energy requirements, percentage lipid contents, and lower/higher heating product value. An ‘Optimistic Case’ was projected with estimates of: 45% lipid content; reduced energy needs for lipid extraction (1.3 MJ per MJ biodiesel); and heating value of biodiesel (42 MJ/kg). The life cycle energy requirements dropped significantly by about 60%. The results are compared with other published case studies from other countries.  相似文献   

11.
Energy production from biomass (Part 1): Overview of biomass   总被引:37,自引:0,他引:37  
The use of renewable energy sources is becoming increasingly necessary, if we are to achieve the changes required to address the impacts of global warming. Biomass is the most common form of renewable energy, widely used in the third world but until recently, less so in the Western world. Latterly much attention has been focused on identifying suitable biomass species, which can provide high-energy outputs, to replace conventional fossil fuel energy sources. The type of biomass required is largely determined by the energy conversion process and the form in which the energy is required. In the first of three papers, the background to biomass production (in a European climate) and plant properties is examined. In the second paper, energy conversion technologies are reviewed, with emphasis on the production of a gaseous fuel to supplement the gas derived from the landfilling of organic wastes (landfill gas) and used in gas engines to generate electricity. The potential of a restored landfill site to act as a biomass source, providing fuel to supplement landfill gas-fuelled power stations, is examined, together with a comparison of the economics of power production from purpose-grown biomass versus waste-biomass. The third paper considers particular gasification technologies and their potential for biomass gasification.  相似文献   

12.
Ammonium nitrate and calcium ammonium nitrate are the most commonly used straight nitrogen fertilisers in Europe, accounting for 43% of the total nitrogen used for fertilisers. They are both produced in a similar way; carbonate can be added as a last step to produce calcium ammonium nitrate. The environmental impact, fossil energy input and land use from using gasified biomass (cereal straw and short rotation willow (Salix) coppice) as feedstock in ammonium nitrate production were studied in a cradle-to-gate evaluation using life cycle assessment methodology. The global warming potential in the biomass systems was only 22-30% of the impact from conventional production using natural gas. The eutrophication potential was higher for the biomass systems due to nutrient leaching during cultivation, while the acidification was about the same in all systems. The primary fossil energy use was calculated to be 1.45 and 1.37MJ/kg nitrogen for Salix and straw, respectively, compared to 35.14MJ for natural gas. The biomass production was assumed to be self-supporting with nutrients by returning part of the ammonium nitrate produced together with the ash from the gasification. For the production of nitrogen from Salix, it was calculated that 3914kg of nitrogen can be produced every year from 1ha, after that 1.6% of the produced nitrogen has been returned to the Salix production. From wheat straw, 1615kg of nitrogen can be produced annually from 1ha, after that 0.6% of the nitrogen has been returned.  相似文献   

13.
《Biomass》1982,2(1):29-41
In any consideration of the use of biomass for energy in Canada and its effect on forest management practices, it should be understood that a major change in the energy system is involved. There will be a change from a highly organised production and delivery system controlled from outside the country's borders to production and delivery systems which are highly localised within forest regions within Canada and where the investments and the benefits accruing from them remain within the localities.Because of the highly localised and regional aspects of the production of energy from biomass it is not realistic to consider it on a Canada-wide basis. On a macroscale, Canada has ample biomass over and above conventional uses for energy purposes but locally it can be in short supply. For this reason availability of biomass in sufficient quantity and at an acceptable cost must be considered on a site-specific basis.  相似文献   

14.
Grassland biomass is suitable in numerous ways for producing energy. It is well established as feedstock for biogas production. The aim of this review is to summarize current knowledge on suitability and sustainability of grassland biomass for anaerobic digestion. In the first section grassland management for biogas feedstock as well as specifics of harvest, postharvest and digestion technology are described. Methane yields from grass are influenced by many factors. While the effects of some parameters such as grass species, cutting period and management intensity can be regarded as well known, other parameters such as preservation and processing still need investigation. In the second section economic aspects and environmental impacts are discussed. Profitability can be achieved depending on grass silage supply costs and the concept of anaerobic digestion and energy use. Grassland biomass for biogas production competes with other feedstock and other forms of grassland use, in particular animal husbandry. In developed countries a growing production of milk and meat is achieved with decreasing ruminant numbers, resulting in an increasing amount of surplus grassland with a remarkable bioenergy potential. In emerging and developing countries a rapidly rising demand for and production of milk and meat induce growing pressure on grasslands, so that their use for animal feed presumably will take priority over use for bioenergy. Grasslands provide a variety of essential environmental benefits such as carbon storage, habitat function, preservation of ground and surface water quality. When producing biogas from grassland these benefits will remain or even grow, providing appropriate grassland management is implemented. In particular, greenhouse gas emissions can be considerably reduced.  相似文献   

15.
The global food system is a major energy user and a relevant contributor to climate change. To date, the literature on the energy profile of food systems addresses individual countries and/or food products, and therefore a comparable assessment across regions is still missing. This paper uses a global multi‐regional environmentally extended input–output database in combination with newly constructed net energy‐use accounts to provide a production and consumption‐based stock‐take of energy use in the food system across different world regions for the period 2000–2015. Overall, the ratio between energy use in the food system and the economy is slowly decreasing. Likewise, the absolute values point toward a relative decoupling between energy use and food production, as well as to relevant differences in energy types, users, and consumption patterns across world regions. The use of (inefficient) traditional biomass for cooking substantially reduces the expected gap between per capita figures in high‐ and low‐income countries. The variety of energy profiles and the higher exposure to energy security issues compared to the total economy in some regions suggests that interventions in the system should consider the geographical context. Reducing energy use and decarbonizing the supply chains of food products will require a combination of technological measures and behavioral changes in consumption patterns. Interventions should consider the effects beyond the direct effects on energy use, because changing production and consumption patterns in the food system can lead to positive spillovers in the social and environmental dimensions outlined in the Sustainable Development Goals.  相似文献   

16.
生物柴油原料资源高油脂微藻的开发利用   总被引:16,自引:1,他引:15  
生物柴油作为化石能源的替代燃料已在国际上得到广泛应用。至今生物柴油的原料主要来自油料植物, 但与农作物争地的情况以及较高的原料成本限制了生物柴油的进一步推广。微藻作为高光合生物有其特殊的原料成本优势, 微藻的脂类含量最高可达细胞干重的80%。利用生物技术改良微藻, 获得的高油脂基因工程微藻经规模养殖, 可大大降低生物柴油原料成本。介绍了国内外生物柴油的应用现状, 阐述了微藻作为生物柴油原料的优势, 对基因工程技术调控微藻脂类代谢途径的研究进展, 以及在构建工程微藻中面临的问题和应采取的对策进行了综述和展望。  相似文献   

17.
The use of renewable energy sources is becoming increasingly necessary to mitigate global warming. Recently much research has been focused on identifying suitable biomass species, which can provide high-energy outputs, to replace conventional fossil fuels. This paper reports an approach for increasing the yield of bio-oil production from fast pyrolysis after manipulating the metabolic pathway in microalgae through heterotrophic growth. The yield of bio-oil (57.9%) produced from heterotrophic Chlorella protothecoides cells was 3.4 times higher than from autotrophic cells by fast pyrolysis. The bio-oil was characterized by a much lower oxygen content, with a higher heating value (41 MJ kg(-1)), a lower density (0.92 kg l(-1)), and lower viscosity (0.02 Pas) compared to those of bio-oil from autotrophic cells and wood. These properties are comparable to fossil oil. The research could contribute to the creation of a system to produce energy from microalgae, and also could have great commercial potential for liquid fuel production.  相似文献   

18.
Abstract: This article reports an assessment of the global warming potential associated with the life cycle of a biopolymer (poly(hydroxyalkanoate) or PHA) produced in genetically engineered corn developed by Monsanto. The grain corn is harvested in a conventional manner, and the polymer is extracted from the corn stover (i.e., residues such as stalks, leaves and cobs), which would be otherwise left on the field. While corn farming was assessed based on current practice, four different hypothetical PHA production scenarios were tested for the extraction process. Each scenario differed in the energy source used for polymer extraction and compounding, and the results were compared to polyethylene (PE). The first scenario involved burning of the residual biomass (primarily cellulose) remaining after the polymer was extracted from the stover. In the three other scenarios, the use of conventional energy sources of coal, oil, and natural gas were investigated. This study indicates that an integrated system, wherein biomass energy from corn stover provides energy for polymer processing, would result in a better greenhouse gas profile for PHA than for PE. However, plant-based PHA production using fossil fuel sources provides no greenhouse gas advantage over PE, in fact scoring worse than PE. These results are based on a "cradle-to-pellet" modeling as the PHA end-of-life was not quantitatively studied due to complex issues surrounding the actual fate of postconsumer PHA.  相似文献   

19.
Our paper is an empirical study on the comparison between the conventional energy- growth nexus and the energy-ISEW (Index for Sustainable Economic Welfare) growth nexus. We use a sample of American countries in a multivariate panel framework for a data span from 1990 to 2013, with variables such as labor, capital, carbon emissions, energy use, renewable energy, rents and trade. Results from this paper are critical for governments and institutional investors who are nowadays concerned with sustainable economic growth and welfare and not only the short-sighted GDP growth. An additional contribution of this paper is the calculation of the ISEW index for American countries, based on data availability.  相似文献   

20.
Heating with orchids Species‐rich meadows in Germany and Europe are highly threatened habitats. For conservation of these habitats regular cutting is necessary to prevent the invasion of high‐growing woody plants which otherwise would rule out the sun‐loving meadow species. However, due to a low energy content the extracted biomass is not well suitable for modern agricultural use or conventional energy production. Currently, scientists of the University of Kassel apply a new procedure which converts the species‐rich biomass into solid fuel for thermal combustion. During this process the extracted plant fluids are fermented to biogas, whereas the solid plant remains are pressed to pellets. In this manner the scientists intend to contribute to nature and climate protection as well as to an additional income for farmers.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号