Molecular cloning and sequence determination of the lpd gene encoding lipoamide dehydrogenase from Pseudomonas fluorescens

The lpd gene encoding lipoamide dehydrogenase (dihydrolipoamide dehydrogenase; EC 1.8.1.4) was isolated from a library of Pseudomonas fluorescens DNA cloned in Escherichia coli TG2 by use of serum raised against lipoamide dehydrogenase from Azotobacter vinelandii. Large amounts (up to 15% of total cellular protein) of the P. fluorescens lipoamide dehydrogenase were produced by the E. coli clone harbouring plasmid pCJB94 with the lipoamide dehydrogenase gene. The enzyme was purified to homogeneity by a three-step procedure. The gene was subcloned from plasmid pCJB94 and the complete nucleotide sequence of the subcloned fragment (3610 bp) was determined. The derived amino acid sequence of P. fluorescens lipoamide dehydrogenase showed 84% and 42% homology when compared to the amino acid sequences of lipoamide dehydrogenase from A. vinelandii and E. coli, respectively. The lpd gene of P. fluorescens is clustered in the genome with genes for the other components of the 2-oxoglutarate dehydrogenase complex.     

On the FAD-induced dimerization of apo-lipoamide dehydrogenase from Azotobacter vinelandii and Pseudomonas fluorescens. Kinetics of reconstitution

The apoenzymes of lipoamide dehydrogenase from pig heart and from Pseudomonas fluorescens were prepared at pH 2.7 and pH 4.0, respectively, using a hydrophobic interaction chromatography procedure recently developed for lipoamide dehydrogenase from Azotobacter vinelandii and other flavoproteins [Van Berkel et al. (1988) Eur. J. Biochem. 178, 197-207]. The apoenzyme from pig heart, having 5% of residual activity, shows an equilibrium between the monomeric and dimeric species. Both the yield and the degree of reconstitution of dimeric holoenzyme is 75% of starting material under optimal conditions. The kinetics of reconstitution of pig heart apoenzyme differ slightly from that obtained with the apoenzyme prepared by acid ammonium sulfate precipitation at pH 1.5 [Kalse, J. F. and Veeger, C. (1968) Biochim. Biophys. Acta 159, 244-256]. The apoenzyme from P. fluorescens is in the monomeric state and shows negligible residual activity. The yield and degree of reconstitution of the dimeric holoenzyme is more than 90% of starting material. Reconstitution of the apoenzymes from A. vinelandii and P. fluorescens involves minimally a two-step sequential process. Initial flavin-binding results in regaining of full dichloroindophenol activity, quenching of tryptophan fluorescence and strong increase of FAD fluorescence polarization. In the second step, dimerization occurs as reflected by regain of lipoamide activity, strongly increased FAD fluorescence and increased hyperchroism of the visible absorption spectrum. The kinetics of FAD-induced dimerization are strongly dependent on the apoenzyme used. At 0 degrees C, the monomeric apoenzyme-FAD complex is either stabilized (P. fluorescens) or only transiently detectable (A. vinelandii). Dimerization of P. fluorescens enzyme is strongly stimulated in the presence of NADH.     

Lipoamide dehydrogenase from Azotobacter vinelandii. The role of the C-terminus in catalysis and dimer stabilization.

The 10 C-terminal residues are not visible in the crystal structure of lipoamide dehydrogenase from Azotobacter vinelandii, but can be observed in the crystal structures of the lipoamide dehydrogenases from Pseudomonas putida and Pseudomonas fluorescens. In these structures, the C-terminus folds back towards the active site and is involved in interactions with the other subunit. The function of the C-terminus of lipoamide dehydrogenase from A. vinelandii was studied by deletion of 5, 9 and 14 residues, respectively. Deletion of the last 5 residues does not influence the catalytic properties and conformational stability (thermoinactivation and unfolding by guanidinium hydrochloride). Removal of 9 residues results in an enzyme (enzyme delta 9) showing decreased conformational stability and high sensitivity toward inhibition by NADH. These features are even more pronounced after deletion of 14 residues (enzyme delta 14). In addition Tyr16, conserved in all lipoamide dehydrogenases sequenced thus far, and shown from the other structures to be likely to be involved in subunit interaction, was replaced by Phe and Ser. Mutation of Tyr16 also results in a strongly increased sensitivity toward inhibition by NADH. The conformational stability of both Tyr16-mutated enzymes is comparable to enzyme delta 9. The results strongly indicate that a hydrogen bridge between tyrosine of one subunit (Tyr16 in the A. vinelandii sequence) and histidine of the other subunit (His470 in the A. vinelandii sequence), exists in the A. vinelandii enzyme. In the delta 9 and delta 14 enzymes this interaction is abolished. It is concluded that this interaction mediates the redox properties of the FAD via the conformation of the C-terminus containing residues 450-470.     

Pyruvate dehydrogenase from Azotobacter vinelandii. Properties of the N-terminally truncated enzyme.

The pyruvate dehydrogenase multienzyme complex (PDHC) catalyses the oxidative decarboxylation of pyruvate and the subsequent acetylation of coenzyme A to acetyl-CoA. Previously, limited proteolysis experiments indicated that the N-terminal region of the homodimeric pyruvate dehydrogenase (E1p) from Azotobacter vinelandii could be involved in the binding of E1p to the core protein (E2p) [Hengeveld, A. F., Westphal, A. H. & de Kok, A. (1997) Eur J. Biochem. 250, 260-268]. To further investigate this hypothesis N-terminal deletion mutants of the E1p component of Azotobacter vinelandii pyruvate dehydrogenase complex were constructed and characterized. Up to nine N-terminal amino acids could be removed from E1p without effecting the properties of the enzyme. Truncation of up to 48 amino acids did not effect the expression or folding abilities of the enzyme, but the truncated enzymes could no longer interact with E2p. The 48 amino acid deletion mutant (E1pdelta48) is catalytically fully functional: it has a Vmax value identical to that of wild-type E1p, it can reductively acetylate the lipoamide group attached to the lipoyl domain of the core enzyme (E2p) and it forms a dimeric molecule. In contrast, the S0.5 for pyruvate is decreased. A heterodimer was constructed containing one subunit of wild-type E1p and one subunit of E1pdelta48. From the observation that the heterodimer was not able to bind to E2p, it is concluded that both N-terminal domains are needed for the binding of E1p to E2p. The interactions are thought to be mainly of an electrostatic nature involving negatively charged residues on the N-terminal domains of E1p and previously identified positively charged residues on the binding and catalytic domain of E2p.     

The domain structure of the dihydrolipoyl transacetylase component of the pyruvate dehydrogenase complex from Azotobacter vinelandii

Limited proteolysis with trypsin has been used to study the domain structure of the dihydrolipoyltransacetylase (E2) component of the pyruvate dehydrogenase complex of Azotobacter vinelandii. Two stable end products were obtained and identified as the N-terminal lipoyl domain and the C-terminal catalytic domain. By performing proteolysis of E2, which was covalently attached via its lipoyl groups to an activated thiol-Sepharose matrix, a separation was obtained between the catalytic domain and the covalently attached lipoyl domain. The latter was removed from the column after reduction of the S-S bond and purified by ultrafiltration. The lipoyl domain is monomeric with a mass of 32.6 kDa. It is an elongated structure with f/fo = 1.62. Circulair dichroic studies indicates little secondary structure. The catalytic domain is polymeric with S20.w = 17 S and mass = 530 kDa. It is a compact structure with f/fo = 1.24 and shows 40% of the secondary structure of E2. The cubic structure of the native E2 is retained by this fragment as observed by electron microscopy. Ultracentrifugation in 6 M guanidine hydrochloride in the presence of 2 mM dithiothreitol yields a mass of 15.8 kDa. An N-terminal sequence of 36 amino acids is homologous with residues 370-406 of Escherichia coli E2. The catalytic domain possesses the catalytic site, but in contrast to the E. coli subunit binding domain the pyruvate dehydrogenase (E1) and lipoamide dehydrogenase (E3) binding sites are lost during proteolysis. From comparison with the E. coli E2 sequence a model is presented in which the several functions, such as lipoyl domain, the E3 binding site, the catalytic site, the E2/E2 interaction sites, and the E1 binding site, are indicated.     

Site-directed mutagenesis of the dihydrolipoyl transacetylase component (E2p) of the pyruvate dehydrogenase complex from Azotobacter vinelandii. Binding of the peripheral components E1p and E3.

Site-directed mutagenesis was performed in the protease-sensitive region, between the lipoyl and catalytic domains and in the catalytic domain, of the dihydrolipoyl transacetylase component (E2p) of the pyruvate dehydrogenase complex from Azotobacter vinelandii. The interaction of the mutated enzymes with the peripheral components pyruvate dehydrogenase (E1p) and lipoamide dehydrogenase (E3) was studied by gel filtration experiments, analytical ultracentrifugation and reconstitution of the pyruvate dehydrogenase complex. Upon binding of peripheral components, the 24-subunit core of A. vinelandii wild-type E2p dissociates into tetramers. Four E1p or E3 dimers can bind to a tetramer. Binding is mutually exclusive, resulting in an active complex containing one E3 and three E1p dimers. Large deletions of the protease-sensitive region of E2p resulted in a total loss of the E1p and E3 binding. A small deletion (delta P361-R362) or the point mutation K367Q in the protease-sensitive region did not influence E3 binding, but affected E1p binding strongly, although with excess E1p almost complete reconstitution was reached. For E2p with the point mutation R416D in the N-terminal region of the catalytic domain only 16% overall activity could be measured in reconstituted complexes. This is due to a very weak E1p/E2p interaction, whereas the E3 binding was not affected. The point mutation R416D did not influence the catalytic activity of E2p, although a function for this residue in the formation of the active site was predicted from amino acid similarities with chloramphenicol acetyltransferase type III from Escherichia coli. Deletion of the complete Ala + Pro-rich sequence between the protease-sensitive region and the catalytic domain did not affect the enzymological properties of E2p, nor the affinity for E1p or E3. A further deletion of 20 N-terminal residues from the catalytic domain destroyed the E2p activity. From gel filtration experiments it was concluded that the quaternary structure was unaffected, as was E3 binding. E1p binding was lost and, in contrast to the wild-type enzyme, no dissociation of the core upon addition of E3 was observed. This mutant enzyme possesses, like E. coli E2p, six E3 binding sites and clearly shows that interaction of E3 or E1p with the E1p sites and dissociation are linked processes. It is concluded that the binding site for E3 is located on the N-terminal part of the protease-sensitive region. In contrast, the binding site for E1p consists of two regions, one located on the protease-sensitive region and one of the catalytic domain. These regions are separated by a flexible sequence of about 20 amino acids.     

The dihydrolipoyltransacetylase component of the pyruvate dehydrogenase complex from Azotobacter vinelandii. Molecular cloning and sequence analysis

The gene encoding the dihydrolipoyltransacetylase component (E2) of the pyruvate dehydrogenase complex from Azotobacter vinelandii has been cloned in Escherichia coli. A plasmid containing a 2.8-kbp insert of A. vinelandii chromosomal DNA was obtained and its nucleotide sequence determined. The gene comprises 1911 base pairs, 637 codons excluding the initiation codon GUG and stop codon UGA. It is preceded by the gene encoding the pyruvate dehydrogenase component (E1) of pyruvate dehydrogenase complex and by an intercistronic region of 11 base pairs containing a good ribosome binding site. The gene is followed downstream by a strong terminating sequence. The relative molecular mass (64913), amino acid composition and N-terminal sequence are in good agreement with information obtained from studies on the purified enzyme. Approximately the first half of the gene codes for the lipoyl domain. Three very homologous sequences are present, which are translated in three almost identical units, alternated with non-homologous regions which are very rich in alanyl and prolyl residues. The N-terminus of the catalytic domain is sited at residue 381. Between the lipoyl domain and the catalytic domain, a region of about 50 residues is found containing many charged amino acid residues. This region is characterized as a hinge region and is involved in the binding of the pyruvate dehydrogenase and lipoamide dehydrogenase components. The homology with the dihydrolipoyltransacetylase from E. coli is high: 50% amino acid residues are identical.     

Lipoamide dehydrogenase from Azotobacter vinelandii. Molecular cloning, organization and sequence analysis of the gene

The gene encoding lipoamide dehydrogenase from Azotobacter vinelandii has been cloned in Escherichia coli. Fragments of 9-23 kb from Azotobacter vinelandii chromosomal DNA obtained by partial digestion with Sau3A were ligated into the BamHI site of plasmid pUC9. E. coli TG2 cells were transformed with the resulting recombinant plasmids. Screening for clones which produced A. vinelandii lipoamide dehydrogenase was performed with antibodies raised against the purified enzyme. A positive colony was found which produced complete chains of lipoamide dehydrogenase as concluded form SDS gel electrophoresis of the cell-free extract, stained for protein or used for Western blotting. After subcloning of the 14.7-kb insert of this plasmid the structural gene could be located on a 3.2-kb DNA fragment. The nucleotide sequence of this subcloned fragment (3134 bp) has been determined. The protein-coding sequence of the gene consists of 1434 bp (478 codons, including the AUG start codon and the UAA stop codon). It is preceded by an intracistronic region of 85 bp and the structural gene for succinyltransferase. A putative ribosome-binding site and promoter sequence are given. The derived amino acid composition is in excellent agreement with that previously published for the isolated enzyme. The predicted relative molecular mass is 50223, including the FAD. The overall homology with the E. coli enzyme is high with 40% conserved amino acid residues. From a comparison with the three-dimensional structure of the related enzyme glutathione reductase [Rice, D. W., Schultz, G. E. & Guest, J. R. (1984) J. Mol. Biol. 174, 483-496], it appears that essential residues in all four domains have been conserved. The enzyme is strongly expressed, although expression does not depend on the vector-encoded lacZ promoter. The cloned enzyme is, in all the respects tested, identical with the native enzyme.     

Resolution of branched-chain oxo acid dehydrogenase complex of Pseudomonas aeruginosa PAO.

Branched-chain oxo acid dehydrogenase was purified from Pseudomonas aeruginosa strain PAO with the objective of resolving the complex into its subunits. The purified complex consisted of four proteins, of Mr 36,000, 42,000, 49,000 and 50,000. The complex was resolved by heat treatment into the 49,000 and 50,000-Mr proteins, which were separated by chromatography on DEAE-Sepharose. The 49,000-Mr protein was identified as the E2 subunit by its ability to catalyse transacylation with a variety of substrates, with dihydrolipoamide as the acceptor. P. aeruginosa, like P. putida, produces two lipoamide dehydrogenases. One, the 50,000-Mr protein, was identified as the specific E3 subunit of branched-chain oxo acid dehydrogenase and had many properties in common with the lipoamide dehydrogenase LPD-val of P. putida. The second lipoamide dehydrogenase had Mr 54,000 and corresponded to the lipoamide dehydrogenase LPD-glc of P. putida. Fragments of C-terminal CNBr peptides of LPD-val from P. putida and P. aeruginosa corresponded closely, with only two amino acid differences over 31 amino acids. A corresponding fragment at the C-terminal end of lipoamide dehydrogenase from Escherichia coli also showed extensive homology. All three peptides had a common segment of eight amino acids, with the sequence TIHAHPTL. This homology was not evident in any other flavoproteins in the Dayhoff data base which suggests that this sequence might be characteristic of lipoamide dehydrogenase.     

The quaternary structure of the dihydrolipoyl transacetylase component of the pyruvate dehydrogenase complex from Azotobacter vinelandii. A reconsideration

After limited proteolysis of the dihydrolipoyl transacetylase component (E2) of Azotobacter vinelandii pyruvate dehydrogenase complex (PDC), a C-terminal domain was obtained which retained the transacetylase active site and the quaternary structure of E2 but had lost the lipoyl-containing N-terminal part of the chain and the binding sites for the peripheral components, pyruvate dehydrogenase and lipoamide dehydrogenase. The C-terminus of this domain was determined by treatment with carboxypeptidase Y and shown to be identical with the C-terminus of E2. Together with the previously determined N-terminus and the known amino acid sequence of E2, a molecular mass of 27.5 kDa was calculated. From the molecular mass of the native catalytic domain, 530 kDa, and the symmetry of the cubic structures observed on electron micrographs, a 24-meric structure is concluded instead of the 32-meric structure proposed previously. From the effect of guanidine hydrochloride on the light-scattering of intact E2 it was concluded that dissociation occurs in a two-step reaction resulting in particles with an average mass 1/6 that of the original mass before the N----D transition takes place. Cross-linking experiments with the catalytic domain indicated that the multimeric E2 is built from tetramers and that the tetramers are arranged as a dimer of dimers. A model for the quaternary structure of E2 is given, in which it is assumed that the tetrameric E2 core of PDC is formed from each of the six morphological subunits located at the lateral face of the cube. Binding of peripheral components to a site that interferes with the cubic assembly causes dissociation, resulting in the unique small PDC of A. vinelandii.     

The refined crystal structure of Pseudomonas putida lipoamide dehydrogenase complexed with NAD+ at 2.45 A resolution.

The three-dimensional structure of one of the three lipoamide dehydrogenases occurring in Pseudomonas putida, LipDH Val, has been determined at 2.45 A resolution. The orthorhombic crystals, grown in the presence of 20 mM NAD+, contain 458 residues per asymmetric unit. A crystallographic 2-fold axis generates the dimer which is observed in solution. The final crystallographic R-factor is 21.8% for 18,216 unique reflections and a model consisting of 3,452 protein atoms, 189 solvent molecules and 44 NAD+ atoms, while the overall B-factor is unusually high: 47 A2. The structure of LipDH Val reveals the conformation of the C-terminal residues which fold "back" into the putative lipoamide binding region. The C-terminus has been proven to be important for activity by site-directed mutagenesis. However, the distance of the C-terminus to the catalytically essential residues is surprisingly large, over 6 A, and the precise role of the C-terminus still needs to be elucidated. In this crystal form LipDH Val contains one NAD+ molecule per subunit. Its adenine-ribose moiety occupies an analogous position as in the structure of glutathione reductase. However, the nicotinamide-ribose moiety is far removed from its expected position near the isoalloxazine ring and points into solution. Comparison of LipDH Val with Azotobacter vinelandii lipoamide dehydrogenase yields an rms difference of 1.6 A for 440 well defined C alpha atoms per subunit. Comparing LipDH Val with glutathione reductase shows large differences in the tertiary and quaternary structure of the two enzymes. For instance, the two subunits in the dimer are shifted by 6 A with respect to each other. So, LipDH Val confirms the surprising differences in molecular architecture between glutathione reductase and lipoamide dehydrogenase, which were already observed in Azotobacter vinelandii LipDH. This is the more remarkable since the active sites are located at the subunit interface and are virtually identical in all three enzymes.     

Reconstitution of pyruvate dehydrogenase multienzyme complexes based on chimeric core structures from Azotobacter vinelandii and Escherichia coli.

Two unique restriction sites were introduced by site-directed mutagenesis at identical positions in the DNA encoding the dihydrolipoyltransacetylase (E2p) components of the pyruvate dehydrogenase complex from Azotobacter vinelandii and from Escherichia coli. In this manner each DNA chain could be cut into three parts, coding for the lipoyl domain, which consists of three lipoyl subdomains, the binding domain and the core-forming catalytic domain, respectively. Chimeric E2p components were constructed by exchanging the three domains between E2p from A. vinelandii and E. coli on gene level. The six chimeric E2p proteins were expressed and purified from E. coli TG2. All chimeras were catalytically active, 24-subunit E2p proteins. Interactions of the peripheral components E1p and E3 with the wild-type enzymes from A. vinelandii and E. coli and with the chimeric proteins were studied by gel-filtration experiments, analytical ultracentrifugation and reconstitution of the overall activity of the complex. A. vinelandii E3 interacts only with those chimeras that contain the A. vinelandii binding domain, whereas E. coli E3 interacts with all chimeras. Exchange of the lipoyl or catalytic domain did not influence the binding properties of E3. Recognition of E1p depends on the origin of both the binding domain and the catalytic domain. E. coli E1p interacts strongly with those chimeras in which both the binding domain and the catalytic domain were derived from E. coli E2p and weakly with chimeras that contained either the binding domain or the catalytic domain from E. coli E2p. No binding of E. coli E1p was observed when both domains were of A. vinelandii origin. A. vinelandii E1p recognizes E2p from A. vinelandii and E. coli, but strong interaction required that the binding and catalytic domain were of the same origin. Exchange of lipoyl domains had no effect on the binding properties of the E1p component. These observations confirm previous conclusions, based on site-directed mutagenesis of A. vinelandii E2p [Schulze, E., Westphal, A. H., Boumans, H., and de Kok, A. (1991) Eur. J. Biochem. 202, 841-848], that the binding site for E1p consists of amino acid residues derived from both the binding and the catalytic domain and extend these conclusions to E. coli E2p. Dissociation of the 24 subunit E2p core was only detected when the chimeric E2p proteins contained the catalytic domain from A. vinelandii E2p. Dissociation depends on the binding of peripheral components to the E1p-binding sites, pointing to differences in the inter-trimer contacts between the E2p proteins from both species.(ABSTRACT TRUNCATED AT 400 WORDS)     

A lipoamide dehydrogenase from Neisseria meningitidis has a lipoyl domain

A protein of molecular weight of 64 kDa (p64k) found in the outer membrane of Neisseria meningitidis shows a high degree of homology with both the lipoyl domain of the acetyltransferase and the entire sequence of the lipoamide dehydrogenase, the E2 and E3 components of the dehydrogenase multienzyme complexes, respectively. The alignment of the p64k with lipoyl domains and lipoamide dehydrogenases from different species is presented. The possible implications of this protein in binding protein-dependent transport are discussed. This is the first lipoamide dehydrogenase reported to have a lipoyl domain. © 1995 Wiley-Liss, Inc.     

Isolation of a third lipoamide dehydrogenase from Pseudomonas putida.

Pseudomonads are the only organisms so far known to produce two lipoamide dehydrogenases (LPDs), LPD-Val and LPD-Glc. LPD-Val is the specific E3 component of branched-chain oxoacid dehydrogenase, and LPD-Glc is the E3 component of 2-ketoglutarate and possibly pyruvate dehydrogenases and the L-factor of the glycine oxidation system. Three mutants of Pseudomonas putida, JS348, JS350, and JS351, affected in lpdG, the gene encoding LPD-Glc, have been isolated; all lacked 2-ketoglutarate dehydrogenase, but two, JS348 and JS351, had normal pyruvate dehydrogenase activity. The pyruvate and 2-ketoglutarate dehydrogenases of the wild-type strain of P. putida were both inhibited by anti-LPD-Glc, but the pyruvate dehydrogenase of the lpdG mutants was not inhibited, suggesting that the mutant pyruvate dehydrogenase E3 component was different from that of the wild type. The lipoamide dehydrogenase present in one of the lpdG mutants, JS348, was isolated and characterized. This lipoamide dehydrogenase, provisionally named LPD-3, differed in molecular weight, amino acid composition, and N-terminal amino acid sequence from LPD-Glc and LPD-Val. LPD-3 was clearly a lipoamide dehydrogenase as opposed to a mercuric reductase or glutathione reductase. LPD-3 was about 60% as effective as LPD-Glc in restoring 2-ketoglutarate dehydrogenase activity and completely restored pyruvate dehydrogenase activity in JS350. These results suggest that LPD-3 is a lipoamide dehydrogenase associated with an unknown multienzyme complex which can replace LPD-Glc as the E3 component of pyruvate and 2-ketoglutarate dehydrogenases in lpdG mutants.     

Binding of pyruvate dehydrogenase to the core of the human pyruvate dehydrogenase complex

In human (h) pyruvate dehydrogenase complex (PDC) the pyruvate dehydrogenase (E1) is bound to the E1-binding domain of dihydrolipoamide acetyltransferase (E2). The C-terminal surface of the E1beta subunit was scanned for the negatively charged residues involved in binding with E2. betaD289 of hE1 interacts with K276 of hE2 in a manner similar to the corresponding interaction in Bacillus stearothermophilus PDC. In contrast to bacterial E1beta, the C-terminal residue of the hE1beta does not participate in the binding with positively charged residues of hE2. This latter finding shows species specificity in the interaction between hE1beta and hE2 in PDC.     

Functional and structural characterization of a synthetic peptide representing the N-terminal domain of prokaryotic pyruvate dehydrogenase

A synthetic peptide (Nterm-E1p) is used to characterize the structure and function of the N-terminal region (amino acid residues 4-45) of the pyruvate dehydrogenase component (E1p) from the pyruvate dehydrogenase multienzyme complex (PDHC) from Azotobacter vinelandii. Activity and binding studies established that Nterm-E1p specifically competes with E1p for binding to the dihydrolipoyl transacetylase component (E2p) of PDHC. Moreover, the experiments show that the N-terminal region of E1p forms an independent folding domain that functions as a binding domain. CD measurements, two-dimensional (2D) (1)H NMR analysis, and secondary structure prediction all indicate that Nterm-E1p has a high alpha-helical content. Here a structural model of the N-terminal domain is proposed. The peptide is present in two conformations, the population of which depends on the sample conditions. The conformations are designated "unfolded" at pH > or =6 and "folded" at pH <5. The 2D (1)H TOCSY spectrum of a mixture of folded and unfolded Nterm-E1p shows exchange cross-peaks that "link" the folded and unfolded state of Nterm-E1p. The rate of exchange between the two species is in the range of 0.5-5 s(-1). Sharp resonances in the NMR spectra of wild-type E1p demonstrate that this 200 kDa enzyme contains highly flexible regions. The observed dynamic character of E1p and of Nterm-E1p is likely required for the binding of the E1p dimer to the two different binding sites on E2p. Moreover, the flexibility might be essential in sustaining the allosteric properties of the enzyme bound in the complex.     

An amino acid sequence in the active site of lipoamide dehydrogenase from pig heart

1. The two cysteine residues forming the disulphide bridge that comprises part of the active site of lipoamide dehydrogenase from pig heart were specifically labelled with iodo[2-(14)C]acetic acid. 2. A tryptic peptide containing these carboxymethylcysteine residues was isolated from digests of reduced and S-carboxymethylated lipoamide dehydrogenase and its amino acid sequence of 23 residues was determined. 3. The sequence is highly homologous with a similar sequence containing the active-site disulphide bridge of lipoamide dehydrogenase derived from the 2-oxoglutarate dehydrogenase complex of Escherichia coli (Crookes strain) and it is probable that, as in the bacterial enzyme, the disulphide bridge forms an intrachain loop containing six residues. The results indicate that the bacterial and mammalian proteins have a common genetic origin. 4. Amino acid sequences containing six other unique carboxymethylcysteine residues were also partly determined. 5. The analysis of the primary structure thus far is consistent with the view that the enzyme (mol.wt. approx. 110000) is composed of two identical polypeptide chains.     

Refined crystal structure of lipoamide dehydrogenase from Azotobacter vinelandii at 2.2 A resolution. A comparison with the structure of glutathione reductase

The structure of lipoamide dehydrogenase from Azotobacter vinelandii has been refined by the molecular dynamics technique to an R-factor of 19.8% at 2.2 A resolution. In the final model, the root-mean-square deviation from ideality is 0.02 A for bond lengths and 3.2 degrees for bond angles. The asymmetric unit comprises two subunits, each consisting of 466 amino acid residues and the prosthetic group FAD, plus 512 solvent molecules. The last ten amino acid residues of both chains are not visible in the electron density distribution and they are probably disordered. The operation required to superimpose the two chains forming the dimer is a rotation of exactly 180 degrees with no translation component. The final model shows the two independently refined subunits to be very similar, except for six loops located at the surface of the molecule. The structure of each subunit of the enzyme consists of four domains with the catalytic centre located at the subunit interface. The reactive disulphide bridge, 48-53, is oxidized with S gamma of Cys53 located 3.5 A away from carbon C-4a of the isoalloxazine ring. The side-chain of His450' points its N epsilon 2 towards S gamma of Cys48 and is hydrogen bonded to the carboxylate of Glu455'. The FAD is bound in an extended conformation and the isoalloxazine ring is not completely planar with an angle between the pteridine and the benzene ring of 7.3 degrees in the first subunit and of 12.1 degrees in the second one. The overall folding of lipoamide dehydrogenase is very similar to that of glutathione reductase. However, a comparison of the two enzymes, which have only 26% sequence identity, reveals significant conformational differences. These concern the tertiary as well as the quaternary structure of the two molecules. In each subunit of lipoamide dehydrogenase the NAD-binding domain and the interface domain appear to be differently oriented with respect to the FAD-binding domain by 7.1 degrees and 7.8 degrees, respectively. The interface domain contains, in addition, major changes in tertiary structure. Furthermore, the two subunits forming the dimer appear to be shifted with respect to each other by more than 4 A, when the lipoamide dehydrogenase dimer is compared with that of glutathione reductase. In spite of all these changes at the tertiary and quaternary level the active sites of the enzymes, which occur at the dimer interface, appear to be remarkably similar.(ABSTRACT TRUNCATED AT 400 WORDS)     

Mobile sequences in the pyruvate dehydrogenase complex, the E2 component, the catalytic domain and the 2-oxoglutarate dehydrogenase complex of Azotobacter vinelandii, as detected by 600 MHz 1H-NMR spectroscopy

600 MHz 1H-NMR spectroscopy demonstrates that the pyruvate dehydrogenase complex of Azotobacter vinelandii contains regions of the polypeptide chain with intramolecular mobility. This mobility is located in the E2 component and can probably be ascribed to alanine-proline-rich regions that link the lipoyl subdomains to each other as well as to the E1 and E3 binding domain. In the catalytic domain of E2, which is thought to form a compact, rigid core, also conformational flexibility is observed. It is conceivable that the N-terminal region of the catalytic domain, which contains many alanine residues, is responsible for the observed mobility. In the low-field region of the 1H-NMR spectrum of E2 specific resonances are found, which can be ascribed to mobile phenylalanine, histidine and/or tyrosine residues which are located in the E1 and E3 binding domain that links the lipoyl domain to the catalytic domain. In the 1H-NMR spectrum of the intact complex, these resonances cannot be observed, indicating a decreased mobility of the E1 and E3 binding domain.