Internal fixation of malar fractures: an experimental biophysical study

Open reduction and internal fixation of displaced zygoma fractures are necessary to avoid immediate and delayed facial disfigurement. Interosseous wires, Kirschner wires, and more recently, rigid metallic miniplates have been recommended for fixation of these and other midfacial fractures. However, the precise physical stability of the zygoma with respect to wire versus miniplate fixation methods and with respect to the number and location of miniplates applied is not known. Noncomminuted zygoma fractures were simulated by saw osteotomy in eight fresh human cadaver heads (16 zygoma "fractures"). Each zygoma was sequentially fixated with three miniplates, two miniplates, one miniplate, and three interosseous wires across the orbital rim and arch "fractures". Static and oscillating loads simulating maximal physiologic masticatory stresses were applied to the fixated zygoma along the lines of action of the masseter muscle by means of a tensometer. The stability and adequacy of each pattern of fixation were recorded. Double-miniplate fixation across the orbital rim of simulated noncomminuted zygoma "fractures" is sufficient to withstand static and oscillating loading similar to physiologic masticatory forces. Neither single-miniplate fixation nor triple-wire fixation are sufficient to stabilize the zygoma against similar forces.     

Treatment of mandibular angle fractures with a matrix miniplate: a preliminary report

Mandibular angle fractures are technically challenging, and a spectrum of techniques for treatment of these fractures has been proposed in the literature. Currently, fixation with one or two miniplates has become a widely accepted method of providing internal fixation and eliminating the need for postoperative maxillomandibular fixation. In this study, the utility of a single 2.0-mm matrix miniplate for mandibular angle fracture management was examined. In a laboratory biomechanical analysis, the overall stability of the single 2.0-mm matrix miniplate compared favorably with two 2.0-mm miniplates in a simulated fracture setting. The matrix miniplate demonstrated an overall better intrinsic stability, more resistance to out-of-plane fracture movement, and a higher load tolerance when motion out-of-plane was challenged. Clinically, the matrix miniplate performed well. In a series of 22 consecutive patients, there were no cases of nonunion, malunion, or plate failure. Two patients developed infection that was managed in both cases by drainage with maintenance of the miniplate. Both went on to full union. These results compare very favorably to previously published series using one or two miniplates.     

An analysis of Le Fort I maxillary advancement in cleft lip and palate patients.

We present a series of 24 consecutive cleft lip and palate patients aged 16 to 46 years (mean age 27 years) who underwent Le Fort I maxillary advancement by the senior author over the past 8 years. Two groups, one of 12 patients with wire fixation and one of 12 patients with miniplate fixation, were evaluated. Each group had 10 unilateral and 2 bilateral clefts. All patients were grafted with autogenous bone (8 cranial, 14 iliac, and 2 mandibular). Horizontal advancement was 3 mm to 2 cm (with a mean of 7.8 mm). Vertical movement ranged from a shortening of 5 mm to a lengthening of 1.3 cm (mean 2.3 mm of lengthening). The amount and timing of relapse were compared in both the horizontal and vertical dimensions. The plated group was more stable in both the horizontal and vertical dimensions (p < 0.05). No significant skeletal relapses occurred after the first year. Statistically significant dental relapse occurred only in the wired group. Three patients developed transverse collapse of the small maxillary cleft segment, and four developed incisor angulation to compensate for maxillary skeletal relapse. The presence of a pharyngeal flap at the time of advancement appeared to increase relapse in both horizontal and vertical dimensions (p < 0.03), but there were too few patients (7 of 24) with pharyngeal flaps to prove this conclusively. We also concluded that pterygomandibular grafting is not necessary to achieve excellent results using miniplate fixation; autogenous grafting of the anterior maxillary osteotomy alone provides the necessary stability.     

Modifications in the surgical correction of trigonocephaly

A modified technique for the surgical correction of trigonocephaly is presented. The technical modifications are designed both to increase the stability of fixation of the supraorbital bar and lateral canthal advancements and to increase interorbital distance and anterior cranial fossa volume when utilized in those patients who exhibit the full expression of trigonocephaly, including midline ridging, bifrontal recession, hypotelorbitism, shortened anterior cranial fossa, deficient projection of lateral orbit, and bitemporal narrowing. It is a modification of the supraorbital bar remodeling/advancement procedure as originally described by Marchac with the introduction of a nasofrontal osteotomy and superior osteotomy bone graft and midline miniplate fixation of the supraorbital bar to the nasofrontal junction. Its use in 20 patients has been favorable.     

Osteotomy to treat malocclusion following reconstruction of the mandible with the free fibula flap

Malocclusion may result after free fibula flap reconstruction of the mandible, because of inadequate positioning of the temporomandibular joint, inaccurate contouring of the reconstruction plate, or subsequent fracture of a miniplate. Factors that alter the vascularity of the transplanted fibula may also result in a delayed presentation of malocclusion. Seven cases are presented, in which primary surgical treatment consisted of segmental mandibulectomy and reconstruction with a free fibula osteoseptocutaneous flap. Fixation was achieved with a reconstruction plate in five cases and a miniplate in two cases. Malocclusion was corrected with an osteotomy performed at the junction of the fibula and the native mandible. The new osteotomy sites were fixed with miniplates and maintained with intermaxillary fixation. Complete bony union was achieved at the osteotomy sites. The correction of malocclusion was successful in all cases, and all patients have resumed a normal diet. This report demonstrates that osteotomy and realignment of the mandible are effective for the secondary correction of malocclusion after mandibular reconstruction with the free fibula osteoseptocutaneous flap.     

Experimental and clinical results of new advances in the treatment of facial trauma

Theoretical considerations and photoelastic and mechanical experiments showed us the progression from metal wires to metal plates in different systems. In the midface there is no question about stabilization by miniplate systems. For mandibular fracture treatment, there is a discussion going on at present about the use of stable maxisystems versus less stable minisystems. Our clinical experience of 15 years indicates that there is no further demand for strict stable fixation of mandibular fractures, and we were encouraged to use less stable systems with similar good results, as our follow-up and statistical evaluation showed. To continue the simplification of osteosynthesis methods we are performing experiments with resorbable materials. Early results show fracture healing comparable with that found with plate-and-screw systems. Our clinical experience has shown that there is no longer any question about the ability of stable fracture treatment by means of osteosynthesis. However, there still is the question of how functional such fracture treatment might be.     

Osteosynthesis and bony healing between two consecutive free fibular bone grafts

This case report describes a recurrent squamous cell carcinoma in the oral cavity requiring two consecutive free fibula transfers at different times. In a unique application of the fibula, rigid miniplate fixation was used between the two independent free flaps to reconstitute the contour of the mandible for an extensive composite oromandibular defect, extending from the left angle to the right ascending ramus. This application underscores the utility of the free osteocutaneous fibular flap for reconstruction of complex mandibular defects.     

Toward CT-based facial fracture treatment

Facial fractures have formerly been classified solely by anatomic location. CT scans now identify the exact fracture pattern in a specific area. Fracture patterns are classified as low, middle, or high energy, defined solely by the pattern of segmentation and displacement in the CT scan. Exposure and fixation relate directly to the fracture pattern for each anatomic area of the face, including frontal bone, frontal sinus, zygoma, nose, nasoethmoidal-orbital region, midface, and mandible. Fractures with little comminution and displacement were accompanied by subtle symptoms and required simple treatment; middle-energy injuries were treated by standard surgical approaches and rigid fixation. Highly comminuted fractures were accompanied by dramatic instability and marked alterations in facial architecture; only multiple surgical approaches to fully visualize the "buttress" system provided alignment and fixation. Classification of facial fractures by (1) anatomic location and (2) pattern of comminution and displacement define refined guidelines for exposure and fixation.     

Skeletal stability after Le Fort I maxillary advancement in patients with unilateral cleft lip and palate

Outcomes in 30 adults and adolescents judged skeletally mature who had unilateral cleft lip and palate and underwent Le Fort I advancement were investigated to determine amount and timing of relapse, correlation between advancement and relapse, effect of performing multiple jaw procedures, effect of different types of bone grafts, effect of pharyngoplasty in place at the time of osteotomy, and effectiveness of various methods of internal fixation. Tracings of preoperative and serial postoperative lateral cephalograms were digitized to calculate horizontal and vertical maxillary changes. No significant differences in outcome was seen between patients who had maxillary surgery alone and those who had operations on both jaws, nor did the outcome vary significantly with the type of autogenous bone graft used or the segmentalization of the Le Fort osteotomy. Mean "effective" advancement was greater immediately and 2 years after surgery in those patients who did not have a pharyngoplasty in place before the operation. Advancement also was greater immediately and after 2 years in the miniplate fixation group than in patients with direct-wire fixation. Mean downward (vertical) displacement was 2.6 mm with a relapse of 1.4 mm after 2 years. Amounts of relapse and of advancement or displacement did not correlate significantly.     

Midface distraction following Le Fort III and monobloc osteotomies: problems and solutions

Distraction osteogenesis has been used increasingly for midfacial advancement in patients with syndromic craniosynostosis and in severe developmental hypoplasia of the midface. In these patients, the degree of advancement required is often so great that restriction of the adjacent soft tissues may preclude stable advancement in one stage. Whereas distraction is an ideal solution by which to gradually lengthen both the bones and the soft tissues, potential problems remain in translating the distraction forces to the midface. In these patients, severe developmental hypoplasia may be associated with weak union between the zygoma and the maxilla, increasing the chance of zygomaticomaxillary dysjunction when using internal devices that translate distraction force to the maxilla through the zygoma. Eight cases are reported in which either internal or external distraction systems were used for midface advancement following Le Fort III (n = 7) or monobloc (n = 1) osteotomies. Cases of patients in whom hypoplasia at the zygomaticomaxillary junction altered or impaired plans for midface distraction were reported from three host institutions. Seven patients had midface hypoplasia associated with syndromic craniosynostosis, and one patient had severe developmental midface hypoplasia. The distraction protocol was modified to successfully complete midface advancement in light of weakness at the zygomaticomaxillary junction in seven patients. Modifications included change from an internal to an external distraction system in two patients, rigid fixation and bone graft stabilization of the midface in one patient, and plate stabilization of a fractured or unstable zygomaticomaxillary junction followed by resumption of internal distraction in four patients. Previous infection and bone loss involving both malar complexes precluded one patient from being a candidate for an internal distraction system. Using a problem-based approach, successful advancement of the midface ranging from 9 to 26 mm at the occlusal level as measured by preoperative and postoperative cephalograms was undergone by all patients. Advantages and disadvantages of the respective distraction systems are reviewed to better understand unique patient characteristics leading to the successful use of these devices for correction of severe midface hypoplasia.     

Simimys and origin of the cricetidae (Rodentia: Muroidea)

Simimys is a late Eocene and earliest Oligocene genus that shares dipodoid (zygoma) and muroid (dental) characters. The Oligocene record of dipodoid rodents includes Plesiosminthus from middle Oligocene deposits of Asia and late Oligocene deposits of Europe. The Oligocene record of muroid rodents includes at least two genera (Eucricetodon and (Cricetops)) from Asia, six genera (Eucricetodon, Pseudocricetodon, Melissiodon, Paracricetodon, Heterocricetodon and Adelomyorion)) from Europe, and three genera (Eumys, Scottimus and Nonomys)) from North America. The known record, as given above, suggests that Siminys is the earliest and most primitive genus with muroid affinities; it also implies that muroid rodents were derived from unknown Eocene dipodoid rodents.The Oligocene cricetid rodents display progressive expansion and inclination of the anterior plate of the zygoma. These changes in the zygoma probably reflect evolutionary stages in the development of a myomorphous zygoma from an hystricomorphous zygoma. Changes in the zygoma apparently took place at different rates and times in Asia. Europe, and North America; they probably reflect differenciation of Cricetodontinae in Palaearctica, and Eumyinae in Nearctica during the Oligocene.     

The skeletal anatomy of mandibulofacial dysostosis (Treacher Collins syndrome)

Three-dimensional osseous surface re-formation imaging from CT scans was used to examine the facial skeletons of 14 living patients with mandibulofacial dysostosis. Partial to complete aplasia of the zygomatic process of the temporal bone, mild hypoplasia to aplasia of the frontal process of the zygoma, antimongoloid slant of the transverse orbital axis, and hypoplasia of the medial pterygoid plates and muscles are common to all patients examined. Deformities of the zygoma, zygomatic process of the frontal bone, mandible, and lateral pterygoid plates and muscles vary from minimal to severe, including aplasia. The body of the zygoma is the least affected part of the bone. Right-left asymmetry characterizes these deformities in all patients. The most consistent skeletal aplasia (cleft) in mandibulofacial dysostosis involves the zygomatic process of the temporal bone rather than the zygoma itself.     

Resorbable plate osteosynthesis of sagittal split osteotomies with major bone movement

This study evaluates resorbable miniplate osteosyntheses in sagittal split osteotomies with major bone repositioning. Two resorbable 2.0-mm miniplate systems, MacroSorb (Macropore, San Diego, Calif.) and PolyMax (Synthes, Oberdorf, Switzerland), were compared consecutively. Amorphous 70:30 poly-L/DL-lactide copolymer plates sustain continuous hydrolysis through water penetration into the implant body during the first 6 months in situ. This breaks copolymer chains into smaller particles, which later become degraded through phagocytotic cells. Eighteen patients, 10 women and eight men, 16 to 57 years old (average, 27 years) were examined. They had severe dysgnathia caused by congenital craniofacial malformations, systemic disorders, trauma, amelogenesis imperfecta, oligodontia, and other conditions, and they needed five 8- to 10-mm and 13 major 10- to 12-mm repositions. Twelve sagittal split osteotomies were fixed with 12 MacroSorb plates in six patients, and 24 osteotomies were filled with 32 PolyMax plates in 12 patients. Ten mandibular plate, screw, hard-tissue, and soft-tissue specimens were taken at 3, 6, 9, or 12 months postoperatively in secondary operations (e.g., dental implant placement).Follow-up ranged from 4 to 19 months; all osteosyntheses reossified. Four patients showed proximal fragments rotated up to 5 mm sagittally anteriorly and nonaligned burr holes on the postoperative radiogram, suggesting plate fractures or screw pullout. When plate fracture was noted, guided occlusion was maintained 4 weeks after surgery. Occlusal, radiologic, and skeletal results remained stable. After starting fixation with two plates on each side, no more plate fractures were seen. In three other patients, minor skeletal relapses up to 3 mm horizontally resulted. Local histologic inspection of specimens showed thorough osseous union. Screw remnants embedded in bone made screw pullout unlikely; rather, screw-head or plate fractures were found as multiple degraded particles. Microscopy showed a chronic foreign body reaction. Two patients (11 percent) developed a sterile fistula 3 and 4 months after surgery, draining implant debris. Here, the biopsies showed a granulocytic infiltrate that subsided clinically after excisional biopsy. The assignment of MacroSorb plates followed by PolyMax plates was done in an otherwise unchanged treatment protocol. Comparison of the number of patients in each group with stable osteosyntheses and regular healing showed no significant differences by Fisher's exact test (p = 0.1516); therefore, the authors focused on the combined results for both treatments.The current osteosynthesis systems showed sufficient stability for mandibular fixation after sagittal split osteotomy and repositioning more than 10 mm distant when two plates were applied to each side; however, 27 percent of patients had complications, including relapses. Disadvantages were the cost, breakability, diameter, and need to place the screws vertically to the plate, necessitating a bent instrument or transbuccal incisions.     

Solitary lag screw osteosynthesis in the treatment of fractures of the angle of the mandible: a retrospective study

Various methods have been advocated for the treatment of fractures of the angle of the mandible, emphasizing the complexity of the problem. A functionally stable osteosynthesis can be achieved in such fractures with a solitary lag screw. This technique meets the principles of rigid internal fixation and achieves maximum stability with a minimum of implant material. It obviates the need for maxillomandibular fixation, as well as the morbidity associated with the conventional methods of treatment. A review is presented of 50 patients who were treated by this method. The data show that the procedure is an effective and predictable modality of treatment with a low rate of morbidity.     

脊柱椎弓根螺钉生物力学研究进展

椎弓根螺钉内固定术是目前临床上治疗脊柱骨折的常用手术方式。生物力学特别是脊柱生物力学方面的研究是其内固定器设计和研制的基础,也是评价其固定的稳定性及实用价值性的具体标准。因此,运用生物力学的理论知识来全面分析脊柱的力学改变及内固定器的作用机制,对于合理使用内固定器械以取得最满意矫形和固定效果具有重要意义。但现有实验条件及实验方法依然存在缺陷。例如,所有现有的实验均为体外实验,仅能反映即可实验结果,而且不能反映椎弓根螺钉在体内的长期力学特性。因此,本文通过椎弓根螺钉的自身设计、螺钉的植入技术、椎弓根螺钉的强化以及其他辅助椎弓根螺钉稳定性的辅助系统来全面分析脊柱椎弓根螺钉的生物力学。     

Placement of endosteal implants in the zygoma after maxillectomy: a Cadaver study using surgical navigation

Endosteal implants facilitate obturator prosthesis fixation in tumor patients after maxillectomy. Previous clinical studies have shown, however, that the survival of implants placed into available bone after maxillectomy is generally poor. Nevertheless, implants positioned optimally in residual zygomatic bone provide superior stability from a biomechanical point of view. In a pilot study, the authors assessed the precision of VISIT, a computer-aided surgical navigation system dedicated to the placement of endosteal implants in the maxillofacial area. Five cadaver specimens underwent hemimaxillectomy. The cadaver head was matched to a preoperative high-resolution computed tomograph by using implanted surgical microscrews as fiducial markers. The position of a surgical drill relative to the cadaver head was determined with an optical tracking system. Implants were placed into the zygomatic arch, where maximum bone volume was available. The results were assessed using tests for localization accuracy and postoperative computed tomographic scans of the cadaver specimens. The localization accuracy of landmarks on the bony skull was 0.6 +/- 0.3 mm (average +/- SD), as determined with a 5-df pointer probe; the localization accuracy of the tip of the implant burr was 1.7 +/- 0.4 mm. The accuracy of the implant position compared with the planned position was 1.3 +/- 0.8 mm for the external perforation of the zygoma and 1.7 +/-1.3 mm for the internal perforation. Eight of 10 implants were inserted with maximal contact to surrounding bone, and two implants were located unfavorably. Reliable placement of implants in this region is difficult to achieve. The technique described in this article may be very helpful in the management of patients after maxillary resection with poor support for obturator prostheses.     

Correction of the nasolabial fold: extended SMAS dissection with periosteal fixation.

The nasolabial fold has defied satisfactory correction with the face lift operation. This is despite variations of the SMAS technique over the last 20 years. In this study, the nasolabial fold is shown to be part of the overall aging deformity that affects the cheek and perioral region. The key to surgical correction, not previously appreciated, is the complete release of the anterior SMAS from the zygoma and zygomaticus major muscle. This allows a dramatic mobilization of the nasolabial fold without tension. The advanced SMAS is then reattached to the zygomatic periosteum by a series of permanent sutures. Each suture, by its location and direction of lift, corrects one of the four nasolabial regions including the jowl. The relevant anatomy is reviewed and the safety of the procedure is assessed in a personal series of 135 patients. It is concluded that the two principles of this technique, i.e., complete SMAS release and reattachment to the zygoma, safely and effectively achieve a natural-appearing rejuvenation of the cheek and nasolabial fold.     

Desmoplastic fibroma of the zygoma.

Desmoplastic fibroma is an exceedingly rare primary bone tumor. Previous reports have not included the presentation of this tumor associated with the zygoma. This report describes the unusual presentation and surgical management of a desmoplastic fibroma of the zygoma.     

Growth restriction of cranial sutures in the fetal lamb causes deformational changes, not craniosynostosis

Newborns with in utero cranial vault molding can present with severe forms of plagiocephaly. Intrauterine constraint has been proposed as one cause for craniosynostosis. The purpose of this experiment was to investigate whether rigid plate fixation across a fetal cranial suture, representing a severe form of growth restriction in utero, would lead to cranial suture fusion in a fetal lamb model. Six fetal lambs at 85 to 95 days gestation (term = 145 days) underwent laparotomy, hysterotomy, fetal coronal scalp incision, and miniplate screw fixation across the right coronal suture in utero. Two unoperated twins and four unoperated age-matched lambs were used as controls (n = 12). Animals were killed at both 4 and 8 weeks postoperatively. Fetal head analysis consisted of gross examination, photography, basilar and lateral radiographs, and three-dimensional computed tomographic scans. Cranial suture analysis consisted of imaging by computed tomographic scan (axial and sagittal cuts) and histology of experimentally plated coronal sutures, contralateral nonplated coronal sutures and twin control coronal sutures. Gross examination, radiographs, and three-dimensional computed tomographic analysis of heads with cranial suture plating showed ipsilateral forehead flattening, contralateral forehead bossing, superiorly displaced ipsilateral orbital rim, anterolateral projection of ipsilateral malar eminence, and anterior position of the ipsilateral ear point compared with the contralateral side of the same animal and normal controls. There was no change in nasal root, chin point, or predentition occlusal plane. Although analysis of the plated coronal sutures by computed tomographic scans showed diminished width or even stenosis, the histology revealed narrowed but patent experimental coronal sutures at 4 and 8 weeks. Contralateral, nonplated coronal sutures were not only patent, but widened compared with normal control sutures. This finding may have represented compensatory changes in the contralateral coronal suture caused by growth restriction at the plated suture. These data demonstrate that intrauterine growth restriction across a cranial suture caused by compression plate fixation resulted in deformational skull changes, not craniosynostosis. In addition, these data strongly support a role for in utero positional molding secondary to growth restriction in the maternal pelvis as a cause for nonsynostotic plagiocephaly seen in newborns.     

Infraorbital nerve injury associated with zygoma fractures: documentation with neurosensory testing

Persistent sensibility abnormalities after correction of zygoma fractures indicate injury to the infraorbital nerve and may produce pain. To investigate this, a retrospective study of 25 patients who had undergone surgical correction of a zygoma fracture was performed. Bilateral neurosensory measurements were obtained with the Pressure-Specified Sensory Device (Sensory Management Services, Baltimore, Md.). Seven of the 25 patients had required orbital floor reconstruction. Each patient had undergone fracture correction at least 6 months earlier and was interviewed, at the time of sensibility testing, regarding symptoms related to the fracture. The data were evaluated by a blinded examiner, from a separate clinical facility, who attempted to predict the side of the fracture and the degree of zygoma displacement on the basis of measurements of sensibility of the paranasal, upper lip, and zygomaticotemporal areas. Seventy-six percent of patients demonstrated abnormal sensibility on the side of the zygoma fracture, compared with the contralateral side. Sensibility was abnormal for 100 percent of the patients who required orbital floor reconstruction. Seventy-four percent of patients with abnormal sensibility reported symptoms related to the fracture. Eighty percent of the zygoma fractures were correctly identified, with respect to the side of the fracture, by the blinded examiner on the basis of the neurosensory measurements alone (p < 0.005). Predictions proved correct for 91 percent of the patients with widely displaced fractures and none of the patients with nondisplaced fractures. The results of this study suggest that neurosensory testing is an important clinical adjunct for the evaluation of patients with facial pain or dysesthesia after facial fracture reconstruction. The results suggest the need to develop algorithms for the diagnosis and treatment of trigeminal nerve injuries after craniofacial trauma. This approach could also be applicable to dysesthesia or pain after aesthetic facial surgical procedures.