Metal loading and enzymatic degradation of fungal cell walls and chitin

The capacity of chitin (from crab shells) and of fungal cell walls from Trichoderma harzianum to accumulate zinc, cadmium and mercury was studied as well as the effects of adsorbed metals on the enzymatic hydrolysis by Novozym 234 of the two substrates. The total adsorbing capacity with respect to these metals was estimated to be at least 10 mmol kg^–1 chitin (dry weight) and 50 mmol kg^–1 fungal cell walls (dry weight), respectively, at pH 6.1. Enzymatic digestion of fungal cell walls preloaded with mercury and cadmium was significantly reduced, while zinc did not cause any significant inhibition. The effect of metal complexation by chitin on the enzymatic digestion was not as pronounced as for fungal cell walls. This could reflect the fact that chitin sorbed a lower total amount of metals. The inhibitory effect of metals on the enzymatic hydrolysis was caused by the association of the metals with the two substrates and not by the presence of free metals in solution.     

Modification of heavy metal uptake efficiency by modified chitosan/anionic surfactant systems

The presence of toxic heavy metals in natural environments entails a potential health hazard for humans. Metal contaminants in these environments are usually tightly bound to colloidal particles and organic matter. On the other hand, the potential of these metals towards chelation by different chelating agents presents a good characteristic for their removal from the environment. On this basis, two chitosan/anionic surfactant complexes were prepared and evaluated for their ability to remove heavy metals from aqueous solutions. The experimental results of the uptake of metal ions including Cu²⁺, Sn²⁺, Co²⁺ and Ni²⁺ are reported in this study. The results show that modified chitosan with short‐spacer group cross‐linkers has a higher potential for heavy metal uptake than long‐chain cross‐linker‐modified chitosan. Also, increasing the electronegativity of the heavy metals increases their uptake from the medium. Increasing the time of exposure of the heavy metals to the modified polymer increases the efficiency of the metal uptake process.     

Efficient hydrolysis of chitosan in ionic liquids

Effective hydrolysis of chitosan, the N-deacetylated product of chitin, remains challenging. Here, we report acid-promoted hydrolysis of chitosan in imidazolium based ionic liquids with good total reducing sugars (TRS) yield under mild conditions. TRS yield reached over 60% in the presence of about 6.0 wt% concentrated hydrochloric acid at 100 °C within 7 h. Kinetic modeling of a typical experimental data set suggested that the hydrolysis most likely followed a consecutive first-order reaction sequence, where k₁ and k₂, the rate constants for TRS formation and degradation, were determined to be 0.01372 and 0.00015 min⁻¹, respectively. Our method may be useful to explore new applications of natural chitin resources.     

Effects of Spray Drying on Physicochemical Properties of Chitosan Acid Salts

The effects of spray-drying process and acidic solvent system on physicochemical properties of chitosan salts were investigated. Chitosan used in spray dryings was obtained by deacetylation of chitin from lobster (Panulirus argus) origin. The chitosan acid salts were prepared in a laboratory-scale spray drier, and organic acetic acid, lactic acid, and citric acid were used as solvents in the process. The physicochemical properties of chitosan salts were investigated by means of solid-state CP-MAS ¹³C nuclear magnetic resonance (NMR), X-ray powder diffraction (XRPD), differential scanning calorimetry, and Fourier transform infrared spectrometry (FTIR) and near-infrared spectroscopy. The morphology of spray-dried chitosan acid salts showed tendency toward higher sphericity when higher temperatures in a spray-drying process were applied. Analysis by XRPD indicated that all chitosan acid salts studied were amorphous solids. Solid-state ¹³C NMR spectra revealed the evidence of the partial conversion of chitosan acetate to chitin and also conversion to acetyl amide form which appears to be dependent on the spray-drying process. The FTIR spectra suggested that the organic acids applied in spray drying may interact with chitosan at the position of amino groups to form chitosan salts. With all three chitosan acid salts, the FTIR bands at 1,597 and 1,615 cm⁻¹ were diminished suggesting that –NH groups are protonated. The FTIR spectra of all chitosan acid salts exhibited ammonium and carboxylate bands at 1,630 and 1,556 cm⁻¹, respectively. In conclusion, spray drying is a potential method of preparing acid salts from chitosan obtained by deacetylation of chitin from lobster (P. argus) origin.     

Chitin and chitosan biopolymer production from the Iranian medicinal fungus Ganoderma lucidum: Optimization and characterization

Abstract

Chitin and chitosan with unique properties and numerous applications can be produced from fungus. The production of chitin and chitosan from the mycelia of an Iranian Ganoderma lucidum was studied to improve cell growth and chitin productivity. Inoculum size and initial pH as two effective variables on the growth of G. lucidum and chitin production were optimized using response surface method (RSM) by central composite design (CCD). The results verified the significant effect of these two variables on the cell growth and chitin production. In optimum conditions, including pH?=?5.7 and inoculum size of 7.4%, the cell dry weight was 5.91?g/L and the amount of chitin production was 1.08?g/L with the productivity of 0.083?g/(L day). The produced chitin and chitosan were characterized using XRD and FTIR. Moreover, the antibacterial activity of the produced chitosan was investigated and compared with the commercial chitosan. The results showed that the produced chitin and chitosan had suitable quality and the Iranian G. lucidum would be a great source for safe and high-quality chitin and chitosan production.     

An easy,inexpensive, and sensitive method for the quantification of chitin in insect peritrophic membrane by image processing

ABSTRACT

Chitin, poly (β-(1→4)-N-acetyl-d-glucosamine), is an important biopolymer for insects that is utilized as a major component of peritrophic membrane. The chitin content in peritrophic membrane is of expedient interest from a pest control perspective, although it is hard to quantify chitin. In this study, we establish a facile method for the quantification of chitin in peritrophic membrane by image processing. In this method, chitin was indirectly quantified using chitosan–I₃^? complex, which exhibited a specific red-purple color. A calibration curve using a chitosan solution showed good linearity in a concentration range of 0.05–0.5 μg/μL. We quantified the amount of chitin in peritrophic membrane of Spodoptera litura (Lepidoptera: Noctuidae) larvae using this method. Throughout the study, only common inexpensive regents and easily attainable apparatuses were employed. This method can be easily applied to the sensitive quantification of the amounts of chitin and chitosan in materials by wide range of researchers.

Abbreviations: LOD: limit of detection; LOQ: limit of quantification; ROI: region of interest; RSD: relative standard deviation.     

A chitinase with high activity toward partially<Emphasis Type="Italic"> N</Emphasis>-acetylated chitosan from a new,moderately thermophilic,chitin-degrading bacterium,<Emphasis Type="Italic"> Ralstonia</Emphasis> sp. A-471

A moderately thermophilic bacterium, strain A-471, capable of degrading chitin was isolated from a composting system of chitin-containing waste. Analysis of the 16S rDNA sequence revealed that the bacterium belongs to the genus Ralstonia. A thermostable chitinase A (Ra-ChiA) was purified from culture fluid of the bacterium grown in colloidal chitin medium. Purification of the enzyme was achieved mainly by exploiting its binding to the colloidal chitin. The molecular mass of the enzyme was estimated to be 70 kDa and the isoelectric point approximately 4.7. N-terminal amino acid sequencing revealed a sequence of ADPYLKVAYYP, which had high homology (66% identity) with that of chitinase A1 from Bacillus circulans WL-12. The pH and temperature optima were determined to be 5.0 and 70°C, respectively. The enzyme was classified as a retaining glycosyl hydrolase and was most active against partially N-acetylated chitosans. Its activities towards the partially N-acetylated chitosans, i.e. chitosan 7B, chitosan 8B, and chitosan 9B, were about 11-fold, 9-fold, and 5-fold higher than towards colloidal chitin, respectively. Ra-ChiA cleaved (GlcNAc)₆ almost exclusively into (GlcNAc)_2. Activation of Ra-ChiA was observed by the addition of 1 mM Cu²⁺, Mn²⁺, Ca²⁺_, or Mg²⁺. Degradation of the partially N-acetylated chitosan produced oligosaccharides with a degree of polymerization ranging from 1–8; these are products that offer potential application for functional oligosaccharide production.     

Antioxidative Activities of Several Marine Polysaccharides Evaluated in a Phosphatidylcholine-liposomal Suspension and Organic Solvents

The antioxidative activities of several water-soluble marine polysaccharides, alginate (ALG), alginate sulfate (SALG), propylene glucolalginate sodium sulfate (PSS), propylene glucol mannuronate sulfate (PGMS), the oligosaccharide of chitosan (OLC), N,O-carboxymethyl chitosan (NOCC) and hydroxypropylated chitosan (HPC), were examined in a phosphatidylcholine (PC)-liposomal suspension containing the water-soluble radical emitter, 2,2′-azobis (2-amidinopropane) dihydrochloride. In the suspensions containing OLC and SALG, the initial rates of PC-OOH accumulation were 2.78×10^-8 Ms^-1 and 2.88×10^-8 Ms^-1, respectively, while all the polysaccharides tested showed antioxidative activity.

Liposoluble marine polysaccharides, hexanoyl chitin (HCH) and an N-benzoylhexanoyl chitosan (NBHC) solution, also retarded the hydroperoxide accumulation of methyl linoleate by effectively trapping peroxide radicals in organic solvents when the radical chain reaction had been initiated by 2,2′-azobis (2,4-dimethylvaleronitrile).

The kinetic data presented indicate that the alginate and chitin derivatives can be expected to play a role in the antioxidative mechanism of biological systems.     

Extraction of chitin and chitosan from larval exuvium and whole body of edible mealworm,Tenebrio molitor

The purpose of this study was to investigate the production of chitin and chitosan from both the exuvium and whole body of mealworm (Tenebrio molitor) larvae. Chitin from the exuvium and whole body of T. molitor larvae was chemically extracted with acid and alkali solutions to achieve demineralization (DM) and deproteinization (DP), respectively. The average DM (%) and DP (%) on a dry weight (DW) basis was 32.56 and 73.16% from larval exuvium, and 41.68 and 91.53% from whole body, respectively. To obtain chitosan, chitin particles from the exuvium and whole body of T. molitor larva were heated at various temperatures in different concentrations of NaOH. Average chitin yields were 18.01% and 4.92% of DW from the exuvium and whole body, respectively. The relative average yield of chitosan from whole body was 3.65% of DW. On average, over 90% of chitosan derived from whole body was deacetylated. The viscosity of chitosan from whole body was ranged from 48.0 cP to 54.0 cP. The chitin content of dry and wet byproducts from whole body were 17.32% and 16.94% respectively, compared to dry weight. The chitosan contents of byproducts on a DW basis were 14.48% in dry and 13.07% in wet byproduct. These results indicate that the exuvium and whole body of T. molitor larva may serve as a source of chitin and chitosan for use in domestic animal feed.     

An extracellular Bacillus sp. chitinase for the production of chitotriose as a major chitinolytic product

An extracellular chitinase of Bacillus sp. WY22 was purified by 9.6-fold. It had a Mr of 35 kDa, an apparent K _m value for colloidal chitin of 3 mg ml^–1 and was optimally active at 37 °C and pH 5.5 over 1 h. The enzyme could also hydrolyse swollen chitin, glycol chitin and chitosan with relative activities of 76%, 34% and 23% compared with colloidal chitin. It formed chitotriose as a major product from colloidal chitin and glycol chitin.     

Biological control of Pythium aphanidermatum in cucumber with a combined application of Lysobacter enzymogenes strain 3.1T8 and chitosan

Pythium aphanidermatum (Edson) Fitzp., causing root and crown rot in cucumber, was successfully managed by Lysobacter enzymogenes strain 3.1T8. Greenhouse experiments were performed with cucumber plants grown in rockwool blocks up to 5 weeks with a recirculated nutrient solution. Application of L. enzymogenes 3.1T8 in combination with chitosan (the deacetylated derivative of chitin) reduced the number of diseased plants by 50–100% in four independent experiments relative to the Pythium control. Application of chitosan or the bacterial inoculant alone was not effective. Washed bacterial cells plus chitosan inhibited Pythium-induced disease, but the supernatant without bacterial cells combined with chitosan was not effective. The most effective and convenient type of commercially available chitosan was selected. Chitosan disappeared from the hydroponic system within 24 h after application, which we attribute to enzyme expression of L. enzymogenes 3.1T8 induced by the exposure to chitosan. Plate counts of the nutrient solution on a general bacterial medium showed the dominance of the inoculated strain, and an increased bacterial population growing on chitin and chitosan as single carbon source. The population density of L. enzymogenes 3.1T8 on the cucumber roots was investigated with a strain specific real-time TaqMan PCR. Highest chitosan concentrations applied (0.1 and 0.03 g/plant) resulted in the highest numbers of L. enzymogenes 3.1T8 present on roots; i.e. 10⁸–10⁹ cells/g root. Substantially higher numbers of bacterial cells were observed by scanning electron microscopy after application of chitosan; no morphological or other qualitative differences were found. The results indicate that addition of chitosan enhanced the biocontrol efficacy of L. enzymogenes 3.1T8; either chitosan serves as C- and N-source for the antagonist, induces antagonistic gene expression, or both.     

Extraction of chitin and chitosan from housefly,Musca domestica,pupa shells

Chitins and chitosans are some of the most abundant natural polysaccharide materials, and are used to increase innate immune response and disease resistance in humans and animals. In this work, chitin and chitosan from housefly, Musca domestica, pupa shells were obtained by treatment with HCl and NaOH. For chitin extraction, 2 N HCl and 1.25 N NaOH solutions were used to achieve decalcification and deproteinization, respectively. For chitosan extraction, 50% NaOH solution was used to achieve deacetylation. The yields of chitin and chitosan from pupa shells of M. domestica were 8.02% and 5.87%, respectively. The deacetylations of chitosan (from chitin C1 and C2) were 89.76% and 92.39%, respectively, after the first alkali treatment with 50% NaOH (w/w) solution at 105 °C for 3 h and 5 h, respectively. The viscosities of the chitosans (from chitin C1 and C2) were 33.6 and 19.2 cP, respectively.     

Evaluation of toxic effects of heavy metals on unicellular algae. V-Influence of extracellular products on toxicity and on type of inhibition

Abstract

Results suggest that the toxicity of mercury and copper to two unicellular algae (Cyanidium caldarium and Chlorella saccharophila) can be decreased either through their subtraction from the culture medium by living or dead cells, or by the extracellular products.

The subtraction of the heavy metals tested manifests itself in each case by a shortening of the lag phase. Further, at least in the case of the combination Chlorella saccharophila-copper, a transition from type III inhibition (increased lag phase) to type II (decreased growth rate) as a results of an increase in the concentration of copper in the presence of extracellular products was observed.

This phenomenon was explained by the different toxic action exerted by copper in its ionic form (type III) as contrasted with copper combined in metalorganic compounds (type II).     

An enzymic method for the determination of chitin and chitosan in fungal cell walls

The free and N-acetyl glucosamine contents, serving as a measure of the amounts of chitosan and chitin respectively, were determined in the chitinase hydrolysates of the cell wall of a wild strain ofNeurospora crassa. Chitinase, obtained from cultures ofSerratia marcescens, could hydrolyse the cell wall completely apart from being capable of hydrolysing preparations of chitin and chitosan. The free and N-acetyl glucosamines, released by chitinase hydrolysis, were determined by a modified Morgan-Elson reaction carried out in the presence and absence of acetic anhydride. The method is capable of estimating chitin and chitosan contents in as little as 100 μg of cell wall material.     

Tolerance ofChlorella vulgaris for metallic and non-metallic ions

The well-known, extreme sensitivity of algae towards Cu⁺⁺ ions prompted a systematic investigation of the tolerance ofChlorella vulgaris for both metallic (49) and non-metallic (7) ions. With thirty metals forming weak bases, pH effects were to some extent super-imposed on the toxic effects of the metal ions themselves. With the elements U, Zr, V and Sb, oxy-compounds had to be used. The elements Mo, W and Bi were tested as components of anions.From the metals that form strong bases, the salts of Na, K, Rb, Ca, Sr and Mg were tolerated in high concentrations; the maximum values of these ranged from 0.11 – 0.98 g at/liter. Notwithstanding some unavoidable simplifications of the experimental technique, it could be concluded from the results that in four intermetal groups, arranged according to I.U.P.A.C., toxicity has a definite tendency to increase with increasing atomic number. This held for the series: Na, K, Rb, Cs; Mg, Ca, Sr, Ba; Zn, Cd, Hg; Al, In, Tl. In like manner, the rare earths were found to be more toxic than the alkaline earth metals.Co, Ni and Cu completely inhibit growth at very low concentrations ranging from 4.2×10^–6–2×10^–5 g at/liter; in view of the relatively low atomic numbers of these metals, the toxicity must be regarded as specific (algotoxicity).Among the non-metals, Sb and As proved highly toxic. Fluoride ions were considerably more toxic than chloride and bromide ions.     

Growth responses and lignin production in cell suspensions of Pinus elliottii ‘elicited’ by chitin,chitosan or mycelium of Cronartium quercum f.sp. fusiforme

Incubation of suspension-cultured slash pine (Pinus elliotti Engelm.) cells with living mycelial plugs or homogenized, washed and autoclaved mycelium of Cronartium quercum f.sp. fusiforme led to rapid clouding of the medium and visible inhibition of cell growth with only a slight increase in cell mortality. Purified chitin elicited similar changes in cloudiness and growth. Chitin treatment concentrations of up to 1 mg ml^-1 showed only slight changes in viability over several days (as with the mycelium and mycelial extract). In contrast, chitosan concentrations of as low as 60 gml^-1 showed cell mortality and browning, with a complete hypersensitive response and over 90% cell death occurring within 48 h at between 180 and 270 ml^-1 chitosan amendment. Phloroglucinol staining showed the presence of lignin-like compounds in the medium and lignin-like compounds were elevated in the cell walls of the chitin, chitosan and mycelium elicited suspension cultures as compared to controls.     

Fabrication and properties of a porous chitin/chitosan conduit for nerve regeneration

A porous, biodegradable, natural chitin/chitosan nerve conduit was constructed. Scanning electron microscopy confirmed that it was homogeneous and highly porous. FT-IR spectra showed that there were no residues arising from the preparation process in the conduit. Addition of chitin to the chitosan solution increased the mechanical strength and maximum tensile strength from 7.2 to 9.6 MPa. Preliminary animal tests indicated that porous chitin/chitosan conduits did not swell in vivo and were compatible with surrounding tissue.     

Algal bioassays to determine toxicity of metal mixtures

The shortcomings of many established toxicity criteria for metals have resulted from a simplification of bioassays performed with single metals. A more comprehensive approach was needed to diagnose the effects of metal mixtures on aquatic organisms. Using Chlorella, Ankistrodesmus and Scenedesmus as test organisms, we experimented on a number of factors which affected metal toxicity bioassays. These included metal interactions, algal competitions, species sensitivities, the ratio of an excess metal to other metals and nutrient levels. An alternative technique was finally established which involved an evaluation of individual assays of Chlorella and Ankistrodesmus in separate media and a tissue-metal analysis on Chlorella. Chlorella fusca, commonly found in lakes with high metal concentrations, showed high tolerance to mixed-metal solutions, while Ankistrodesmus proved to be very sensitive. By determining the maximum yield ratio between Ankistrodesmus and Chlorella (i.e. the A/Ch ratio) it was possible to compare the toxic strength of harmful metals according to an established standard curve of A/Ch ratio versus mixed-metal concentrations. The levels of tissue-metal analysed in Chlorella also gave some indication as to which metals were responsible for the toxicity.     

The degrees of polymerization and N-acetylation of chitosan determine its ability to elicit callose formation in suspension cells and protoplasts of Catharanthus roseus

Partially and fully deacetylated chitosan fragments and oligomers were compared for their potency to elicit formation of the 1.3--glucan callose in suspension-cultured cells and protoplasts of Catharanthus roseus (line 385). Chitosan oligomers induced little callose formation, while callose synthesis increased with the degree of polymerization of chitosan up to several thousand corresponding to a molecular mass near 10⁶ Da. At a comparable degree of polymerization, partially N-acetylated chitosan fragments were less effective. Colloidal chitin and chitin oligomers induced only trace callose synthesis in protoplasts. These results indicate that the primary interaction involved the amino groups of chitosan and numerous negative charges at the surface of the plasma membrane with spacing in the nanometer range and occurring regularly over micrometer stretches. Charged phospholipid head-groups may fulfill these requirements. The resulting alteration of membrane fluidity may lead to the changes in ion transport known to be associated with the induction of callose formation.Abbreviations DP degree of polymerization - FDA fluorescein diacetate - PE pachyman equivalents     

Investigating chitin deacetylation and chitosan hydrolysis during vegetative growth in Magnaporthe oryzae

Chitin deacetylation results in the formation of chitosan, a polymer of β1,4‐linked glucosamine. Chitosan is known to have important functions in the cell walls of a number of fungal species, but its role during hyphal growth has not yet been investigated. In this study, we have characterized the role of chitin deacetylation during vegetative hyphal growth in the filamentous phytopathogen Magnaporthe oryzae. We found that chitosan localizes to the septa and lateral cell walls of vegetative hyphae and identified 2 chitin deacetylases expressed during vegetative growth—CDA1 and CDA4. Deletion strains and fluorescent protein fusions demonstrated that CDA1 is necessary for chitin deacetylation in the septa and lateral cell walls of mature hyphae in colony interiors, whereas CDA4 deacetylates chitin in the hyphae at colony margins. However, although the Δcda1 strain was more resistant to cell wall hydrolysis, growth and pathogenic development were otherwise unaffected in the deletion strains. The role of chitosan hydrolysis was also investigated. A single gene encoding a putative chitosanase (CSN) was discovered in M. oryzae and found to be expressed during vegetative growth. However, chitosan localization, vegetative growth, and pathogenic development were unaffected in a CSN deletion strain, rendering the role of this enzyme unclear.