High-efficiency gene transfection by in situ electroporation of cultured cells

It is demonstrated in this study that high-efficiency gene transfection can be obtained by directly electroporating cultured mammalian cells in their attached state using a pulsed radio-frequency (RF) electric field. A plasmid DNA containing the reporter gene beta-gal was introduced into COS-M6 cells and CV-1 cells using this in situ electroporation method. At the optimal electric field strength (1.2 kV/cm), we found that over 80% of the M6 cells took up and expressed the beta-gal gene with a cell survival rate of about 50%. In contrast, the transfection efficiency was less than 20% when the M6 cells were electroporated in suspension. It was shown that CV-1 cells could also be electroporated highly efficiently using the in situ method. Furthermore, we have measured the time required to express the beta-gal gene after the plasmid DNA was introduced. We found that the percentage of cells expressing beta-gal reached a peak value about 10 h after electroporation. This time-course was the same for both attached and suspended cells, suggesting that the observed difference in transfection efficiency was mainly the result of effects of the detachment treatment on the electroporation process rather than on the gene expression.     

Transient expression of fluorescent fusion proteins in protoplasts of suspension cultured cells

Transient expression of fluorescent fusion proteins in plant cells has dramatically facilitated our study of newly identified genes and proteins. This protocol details an in vivo transient expression system to study the subcellular localization and dynamic associations of plant proteins using protoplasts freshly prepared from Arabidopsis or tobacco BY-2 suspension cultured cells. The method relies on the transformation of DNA constructs into protoplasts via electroporation. The whole protocol is comprised of three major stages: protoplast generation and purification, transformation of DNA into protoplasts via electroporation and incubation of protoplasts for protein analysis. Similar to stably transformed cell lines, transformed protoplasts are compatible with protein localization studies, pharmaceutical drug treatment and western blot analysis. This protocol can be completed within 11-24 h from protoplast production to protein detection.     

Rescue of a Chlamydomonas inner-arm-dynein-deficient mutant by electroporation-mediated delivery of recombinant p28 light chain

We have recently shown that rabbit actin can be introduced by electroporation into the Chlamydomonas ida5 mutant lacking conventional actin and rescue its mutant phenotype [Hayashi et al., 2001: Cell Motil. Cytoskeleton 49:146-153]. In this study, we explored the possibility of using electroporation for functional assay of a recombinant protein. The p28 light chain of inner-arm dyneins was expressed in Escherichia coli, purified to homogeneity, and introduced by electroporation into a non-motile mutant ida4oda6 that lacks it. Because this protein was insoluble in the low ionic strength solution used in the previous study, electroporation was performed at physiological ionic strength in the presence of Ca(2+). Most cells shed their flagella after electroporation. Reflagellation took place within 3 h and up to 30% of the cells became motile, indicating that the introduced p28 retained its functional activity. Fluorescently-labeled p28 was equally effective; in this case fluorescence was observed along the flagella. The presence of Ca(2+) and deflagellation appeared to be important for efficient protein delivery, because a triple mutant with the fa1 mutation deficient in the flagellar shedding mechanism recovered motility only very poorly. Similar results were obtained with other combinations of recombinant proteins and mutants. This study thus demonstrates the feasibility of using electroporation for activity assays of recombinant proteins.     

High-throughput Gene Tagging in Trypanosoma brucei

Improvements in mass spectrometry, sequencing and bioinformatics have generated large datasets of potentially interesting genes. Tagging these proteins can give insights into their function by determining their localization within the cell and enabling interaction partner identification. We recently published a fast and scalable method to generate Trypanosoma brucei cell lines that express a tagged protein from the endogenous locus. The method was based on a plasmid we generated that, when coupled with long primer PCR, can be used to modify a gene to encode a protein tagged at either terminus. This allows the tagging of dozens of trypanosome proteins in parallel, facilitating the large-scale validation of candidate genes of interest. This system can be used to tag proteins for localization (using a fluorescent protein, epitope tag or electron microscopy tag) or biochemistry (using tags for purification, such as the TAP (tandem affinity purification) tag). Here, we describe a protocol to perform the long primer PCR and the electroporation in 96-well plates, with the recovery and selection of transgenic trypanosomes occurring in 24-well plates. With this workflow, hundreds of proteins can be tagged in parallel; this is an order of magnitude improvement to our previous protocol and genome scale tagging is now possible.     

In situ electroporation of radioactive compounds into adherent cells

We previously developed a technique, termed in situ electroporation, where nonpermeant molecules are introduced through an electrical pulse into adherent cells, while they grow on electrically conductive, optically transparent, indium-tin oxide (ITO). Careful control of the electric field intensity results in essentially 100% of the cells taking up the introduced material, without any detectable effect upon the physiology of the cell, presumably because the pores reseal rapidly so that the cellular interior is restored to its original state. Electroporation of radioactive material is faced with two important considerations: (1) potential for exposure of personnel to irradiation, and (2) the requirement for electroporation of a large number of cells. In this report, we describe a modification in the geometry of the slides and electrodes which permits the use of inexpensive ITO-coated glass of lower conductivity that can be discarded after use, to electroporate large numbers of cells using a minimum volume of radioactive nucleotide solution. The results demonstrate that, using this assembly, the determination of the Ras-bound GTP/GTP+GDP ratios through electroporation of [alpha32P]GTP can be conducted using approximately five times lower amounts of isotope than in previous designs. Moreover, this assembly permits efficient upscaling, which makes the determination of Ras-GTP binding in cells which are deficient in Ras activity possible. In addition, we demonstrate the labeling of two viral phosphoproteins--the Simian Virus 40 Large Tumor antigen, and Adenovirus E1A--through [gamma32P]ATP electroporation using this setup. In both cases, electroporation of the nucleotide can achieve a great increase in the efficiency and specificity of labeling compared to the addition of [32P]-orthophosphate to the culture medium, presumably because the immediate phosphate donor nucleotide itself is introduced, which can directly bind to the target proteins.     

Brilliant Blue as an alternative dye to Fast Green for in ovo electroporation

Chick embryo electroporation is a powerful tool for the introduction of transgenes into tissues of interest for the study of developmental biology. This method often uses Fast Green to visualize the injected area by staining the solution containing DNA green. Here, we show that Fast Green fluoresces in a red color after electroporation, suggesting that researchers need to be cautious when detecting red fluorescence. Fast Green solution did not show any fluorescence before injection into chick embryos, but fluoresced red within 3 min post-injection into chick embryos. We identified Brilliant Blue as suitable alternative dye for use as an indicator of injection sites in ovo electroporation. We found that 0.2% of Brilliant Blue was sufficient to track the area of DNA injection. In addition, this chemical did not show red fluorescence after electroporation. Our findings demonstrate that Brilliant Blue can be used for detecting red fluorescent proteins introduced into chick embryos by electroporation. Our study also shows useful examples for the application of Brilliant Blue for the precise quantification of two fluorescence intensities after EGFP and mCherry co-electroporation.     

Engineering mRNA translation initiation to enhance transient gene expression in chinese hamster ovary cells

To increase transient expression of recombinant proteins in Chinese hamster ovary cells, we have engineered their protein synthetic capacity by directed manipulation of mRNA translation initiation. To control this process we constructed a nonphosphorylatable Ser(51)Ala site-directed mutant of eIF2alpha, a subunit of the trimeric eIF2 complex that is implicated in regulation of the global rate of mRNA translation initiation in eukaryotic cells. Phosphorylation of eIF2alpha by protein kinases inhibits eIF2 activity and is known to increase as cells perceive a range of stress conditions. Using single- and dual-gene plasmids introduced into CHO cells by electroporation, we found that transient expression of the eIF2alpha Ser(51)Ala mutant with firefly luciferase resulted in a 3-fold increase in reporter activity, relative to cells transfected with reporter only. This effect was maintained in transfected cells for at least 48 h after transfection. Expression of the wild-type eIF2alpha protein had no such effect. Elevated luciferase activity was associated with a reduction in the level of eIF2alpha phosphorylation in cells transfected with the mutant eIF2alpha construct. Transfection of CHO cells with the luciferase-only construct resulted in a marked decrease in the global rate of protein synthesis in the whole cell population 6 h post-transfection. However, expression of the mutant Ser(51)Ala or wild-type eIF2alpha proteins restored the rate of protein synthesis in transfected cells to a level equivalent to or exceeding that of control cells. Associated with this, entry of plasmid DNA into cells during electroporation was visualized by confocal microscopy using a rhodamine-labeled plasmid construct expressing green fluorescent protein. Six hours after transfection, plasmid DNA was present in all cells, albeit to a variable extent. These data suggest that entry of naked DNA into the cell itself functions to inhibit protein synthesis by signaling mechanisms affecting control of mRNA translation by eIF2. This work therefore forms the basis of a rational strategy to generically up-regulate transient expression of recombinant proteins by simultaneous host cell engineering.     

A GFP-based method facilitates clonal selection of transfected CHO cells

The identification of highly expressing clones is a crucial step in the development of cell lines for production of recombinant proteins. Here we present a method based on the co-expression of enhanced green fluorescent protein (EGFP) that allows clonal selection in standard 96-well cell culture plates. The genes encoding the EGFP protein and the protein of interest are linked by an internal ribosome entry site and thus are transcribed into the same mRNA but are translated independently. Since both proteins arise from a common mRNA, the EGFP expression level correlates with the expression level of the therapeutic protein for each clone. By expressing recombinant growth factors in CHO cells, we demonstrate the robustness and performance of this technique. The method is an alternative to the identification of high-producer clones using various cell sorting methods, as it can be performed with standard laboratory equipment.     

A fast and efficient method for transiently transfecting ES cells: application to the development of systems for conditional gene expression

Classically, mouse embryonic stem (ES) cells are transfected by electroporation, a method that requires a large number of cells. Here we describe a protocol using a liposome based transfection agent that is a very simple, rapid and cost effective way of transiently transfecting very low numbers of ES cells. We found this method very useful in screening a large number of ES clones when working with inducible expression systems in which at least two elements are required for regulated expression of the gene of interest. After stable transfection of the first component, clones can be easily and rapidly screened for expression of the gene of interest by transiently transfecting the second component of the system using this protocol.     

Optimization of transient gene expression in mammalian cells and potential for scale-up using flow electroporation

The goals of this study were to identify mammalian cell lines which could be efficiently transiently-transfected and scaled-up for protein production. The transfection efficiencies of eight cell lines (NSO, NSO-TAg, CV-1, COS-7, CHO, CHO-TAg, HEK 293, and 293-EBNA) were measured using electroporation for DNA delivery and green fluorescent protein (Evans, 1996) as the reporter gene. In addition, we have evaluated the effects of stable expression of viral proteins, cell cycle manipulation, and butyrate post-treatment in small scale experiments. The cell lines varied widely in their GFP transfection efficiencies. Stable expression of simian virus 40 large T-antigen or Epstein Barr nuclear antigen failed to significantly increase transfection efficiency above that seen in the parental lines. Aphidicolin (a DNA polymerase inhibitor), which blocked cells from S or G2/M, brought about an increase in transfection efficiency in two cell lines. The primary effect of butyrate (a histone deacetylase inhibitor) post-treatment was an increased intensity of the fluorescent signal of green fluorescent protein, as measured by flow cytometry (1.0 to 4.2-fold, depending on the cell line). The combined use of aphidicolin pretreatment followed by butyrate treatment post- electroporation yielded increases in fluorescence intensities ranging from 0.9 to 6.8-fold. Based on their high transfection efficiencies in small scale experiments, rapid growth, and ability to grow in suspension culture, CHO, CHO-TAg, and 293-EBNA were selected to assess the feasibility of using flow electroporation for large-scale transfections. Using secreted placental alkaline phosphatase as a reporter, 293-EBNA cells produced the highest protein levels in both the presence and absence of butyrate. These data indicate that flow electroporation provides an efficient method of DNA delivery into large numbers of cells for mammalian protein production. This revised version was published online in August 2006 with corrections to the Cover Date.     

TAT-mediated protein transduction into mammalian cells

Manipulation of mammalian cells has been achieved by the transfection of expression vectors, microinjection, or diffusion of peptidyl mimetics. While these approaches have been somewhat successful, the classic manipulation methods are not easily regulated and can be laborious. One approach to circumvent these problems is the use of HIV TAT-mediated protein transduction. Although this technology was originally described in 1988, few improvements were reported in the subsequent 10 years. In the last few years, significant steps have been taken to advance this technology into a broadly applicable method that allows for the rapid introduction of full-length proteins into primary and transformed cells. The technology requires the synthesis of a fusion protein, linking the TAT transduction domain to the molecule of interest using a bacterial expression vector, followed by the purification of this fusion protein under either soluble or denaturing conditions. The purified fusion protein can be directly added to mammalian cell culture or injected in vivo into mice. Protein transduction occurs in a concentration-dependent manner, achieving maximum intracellular concentrations in less than 5 min, with nearly equal intracellular concentrations between all cells in the transduced population. Full-length TAT fusion proteins have been used to address a number of biological questions, relating to cell cycle progression, apoptosis, and cellular architecture. Described here are the fundamental requirements for the creation, isolation, and utilization of TAT-fusion proteins to affect mammalian cells. A detailed protocol for production and transduction of TAT-Cdc42 into primary cells is given to illustrate the technique.     

Transfection of a DNA/protein complex into nuclei of mammalian cells using polyoma capsids and electroporation

We used empty capsids ofpolyoma virus to transfer DNA fragments and DNA/protein complexes into human cells. We encapsulated labeled and unlabeled single stranded DNA fragments by viral capsids. A complex of DNA with a DNA binding protein, recA, will also be taken up by the capsids, whereas the free protein is not incorporated. We further compared this gentle biological method of DNA transfection with a well-established physical method, electroporation. Electroporation also allows the transfer of DNA as well as protein into cells, although there is no proof that a DNA/protein complex can survive the procedure functionally. Whereas the viability of capsid transfected cells is unaffected (100%), electroporation reduces the viability to 90–95%. On the other hand, the amount of DNA found in the nucleus of electroporated cells is higher than for cells treated with loaded viral capsids.     

Efficient in situ electroporation of mammalian cells grown on microporous membranes.

Electroporation is a common technique for the introduction of DNA molecules into living cells. The method is currently limited by the necessity of applying the electrical discharge to cells in suspension. Adherent cells must therefore be removed from their substratum, which can induce unwanted physiological effects. We report here a new procedure for in situ electroporation of cells grown on microporous membranes of polyethylene terephthalate (PET) or polyester (PE). We demonstrate that this method of in situ electroporation employs only readily available materials and standard electroporation devices without any modifications, is as efficient as conventional electroporation of cells in suspension, and is applicable to a wide range of cell types. Efficient electroporation can be achieved under conditions of minimal cell killing, and can be performed with quiescent cells as well as with confluent epithelial sheets. The method is a useful extension of electroporation technology, and will allow the application of electroporation to a wider spectrum of biological systems.     

Large scale transient expression with COS cells

We demonstrate here that transient expression with COS cells can be performed at the one litre scale for a period of more than 10 days. Cells grown in T225 flasks were transfected by electroporation, transferred into spinners, and then grown either in suspension or on microcarriers. A daily medium change significantly extented culture life and production time, compared with standard protocols.Concentrations of the product, the secreted fusion protein CD40-Fc, were comparable in microcarrier and suspension culture. Cultures were started in fetal calf serum containing medium and the subsequent production process was performed in a low protein serum free medium which allowed easy downstream processing. 10 litres of supernatant, collected from one transfected batch of cells, yielded 30 mg of purified and biologically active protein.In addition to developing a simplified protocol for generation of cells we also reduced the material (DNA, cuvettes) required for electroporation. Our results show that scale up of transient expression to the litre scale can be successfully acieved. This provides a new tool to generate milligram quantities of protein within weeks of gene cloning.     

The expression of biologically active human p53 in Leishmania cells: a novel eukaryotic system to produce recombinant proteins.

We have investigated the use of Leishmania cells as a novel eukaryotic expression system for the production of recombinant protein. These cells are easy to maintain, requiring no CO2 incubator or shaker, and can be grown in standard tissue culture media. Leishmania cells can be readily transfected with plasmid DNA by electroporation and transformants selected with antibiotic resistance. Recent studies have shown that it is possible to express foreign genes in Leishmania for the purpose of understanding the biology of this protozoan cell. In the present study we report the use of this system as a means of producing a biologically functional human p53 protein. The conformation of the p53 protein is critical for its ability to bind specific DNA sequences. It is demonstrated that Leishmania-synthesized human p53 is phosphorylated and can bind specifically to its enhancer DNA sequence. These data demonstrate that Leishmania may represent a simple eukaryotic expression system for the production of biologically active recombinant proteins.     

Protein-encapsulated bio-nanocapsules production with ER membrane localization sequences

Bio-nanocapsules (BNCs) are hollow nanoparticles composed of the L protein of hepatitis B virus (HBV) surface antigen (HBsAg), which can specifically introduce genes and drugs into various kinds of target cells. Although the classic electroporation method has typically been used to introduce highly charged molecules such as DNA, it is rarely adopted for proteins due to its very low efficiency. In this study, a novel approach to the preparation of BNC was established whereby a target protein was pre-encapsulated during the course of nanoparticle formation. Briefly, because of the process of BNC formation in a budding manner on the endoplasmic reticulum (ER) membrane, the association of target proteins to the ER membrane with lipidation sequences (ER membrane localization sequences) could directly generate protein-encapsulating BNC in collaboration with co-expression of the L proteins. Since the membrane-localized proteins are automatically enveloped into BNCs during the budding event, this method can be protect the proteins and BNCs from damage caused by electroporation and obviate the need for laborious consideration to study the optimal conditions for protein encapsulation. This approach would be a useful method for encapsulating therapeutic candidate proteins into BNCs.     

Inhibition of multidrug resistance by SV40 pseudovirion delivery of an antigene peptide nucleic acid (PNA) in cultured cells

Peptide nucleic acid (PNA) is known to bind with extraordinarily high affinity and sequence-specificity to complementary nucleic acid sequences and can be used to suppress gene expression. However, effective delivery into cells is a major obstacle to the development of PNA for gene therapy applications. Here, we present a novel method for the in vitro delivery of antigene PNA to cells. By using a nucleocapsid protein derived from Simian virus 40, we have been able to package PNA into pseudovirions, facilitating the delivery of the packaged PNA into cells. We demonstrate that this system can be used effectively to suppress gene expression associated with multidrug resistance in cancer cells, as shown by RT-PCR, flow cytometry, Western blotting, and cell viability under chemotherapy. The combination of PNA with the SV40-based delivery system is a method for suppressing a gene of interest that could be broadly applied to numerous targets.     

Internalization and Observation of Fluorescent Biomolecules in Living Microorganisms via Electroporation

The ability to study biomolecules in vivo is crucial for understanding their function in a biological context. One powerful approach involves fusing molecules of interest to fluorescent proteins such as GFP to study their expression, localization and function. However, GFP and its derivatives are significantly larger and less photostable than organic fluorophores generally used for in vitro experiments, and this can limit the scope of investigation. We recently introduced a straightforward, versatile and high-throughput method based on electroporation, allowing the internalization of biomolecules labeled with organic fluorophores into living microorganisms. Here we describe how to use electroporation to internalize labeled DNA fragments or proteins into Escherichia coli and Saccharomyces cerevisiæ, how to quantify the number of internalized molecules using fluorescence microscopy, and how to quantify the viability of electroporated cells. Data can be acquired at the single-cell or single-molecule level using fluorescence or FRET. The possibility of internalizing non-labeled molecules that trigger a physiological observable response in vivo is also presented. Finally, strategies of optimization of the protocol for specific biological systems are discussed.     

Optimized delivery of fluorescently labeled proteins in live bacteria using electroporation

Studying the structure and dynamics of proteins in live cells is essential to understanding their physiological activities and mechanisms, and to validating in vitro characterization. Improvements in labeling and imaging technologies are starting to allow such in vivo studies; however, a number of technical challenges remain. Recently, we developed an electroporation-based protocol for internalization, which allows biomolecules labeled with organic fluorophores to be introduced at high efficiency into live E. coli (Crawford et al. in Biophys J 105 (11):2439–2450, 2013). Here, we address important challenges related to internalization of proteins, and optimize our method in terms of (1) electroporation buffer conditions; (2) removal of dye contaminants from stock protein samples; and (3) removal of non-internalized molecules from cell suspension after electroporation. We illustrate the usability of the optimized protocol by demonstrating high-efficiency internalization of a 10-kDa protein, the ω subunit of RNA polymerase. Provided that suggested control experiments are carried out, any fluorescently labeled protein of up to 60 kDa could be internalized using our method. Further, we probe the effect of electroporation voltage on internalization efficiency and cell viability and demonstrate that, whilst internalization increases with increased voltage, cell viability is compromised. However, due to the low number of damaged cells in our samples, the major fraction of loaded cells always corresponds to non-damaged cells. By taking care to include only viable cells into analysis, our method allows physiologically relevant studies to be performed, including in vivo measurements of protein diffusion, localization and intramolecular dynamics via single-molecule Förster resonance energy transfer.