Transformation ofStreptomyces avermitilis by plasmid DNA

Summary Polyethylene glycol (PEG) efficiently mediated the transformation ofStreptomyces avermitilis protoplasts by plasmid DNA to yield 10⁷ transformants per g of plasmid DNA. Under conditios in which the maximum transformation frequency was observed, the cotransformation frequency exceeded 10%. The number of transformants increased linearly with the amount of DNA and number ofS. avermitilis protoplasts. Relaxed and supercoiled, but not linear DNA transformed protoplasts efficiently. Dimethyl sulfoxide (DMSO)-mediated transformation of protoplasts was 1000-fold less efficient. PEG and, less efficiently, DMSO also mediated the transformation of whole cells ofS. avermitilis by DNA.     

Analysis of a high frequency transformation system for Ophiostoma ulmi, the causal agent of Dutch elm disease

Summary A transformation system for Ophiostoma ulmi (Buism.) Nannf. was developed and analyzed. Protoplasts were generated from actively budding yeastlike cells by digestion with NovoZym 234 in MgSO₄ after pretreatment with 2-mercaptoethanol. Protoplast regeneration was most efficient when 0.6 M sucrose was used as the osmoticum. Several plasmids containing fusions between fungal promoters and a bacterial gene for hygromycin phosphotransferase successfully transformed O. ulmi to hygromycin resistance. One of these vectors, pPS57, which contains a promoter for isopenicillin N synthetase from Penicillium chrysogenum, consistently conferred the greatest resistance to hygromycin. Linearization of the vector and inclusion of 2-mercaptoethanol in the transformation reaction resulted in enhanced transformation efficiency. Approximately 4 × 10³ transformants/g DNA per 10⁷ protoplasts were obtained using the optimized procedure. Southern hybridization after alternating field and standard electrophoresis suggested random insertion of tandem repeats (some greater than 250 kb) into the fungal chromosomes. Antibiotic resistance was stable through mitosis. However, expression of the transforming DNA after meiosis was highly variable.     

Stable co-transformation of maize protoplasts with gusA and neo genes

An efficient co-transformation protocol using polyethylene glycol was developed for Zea mays L. (cv. A188 × BMS) protoplasts isolated from suspension culture cells. Co-transformation was accomplished by using plasmid constructions containing -glucuronidase (gusA) or neomycin phosphotransferase (neo) gene coding sequences; both were under control of the CaMV 35S promoter. Protoplast culture and transformation conditions were optimized to assure efficient recovery of transformed cells. The overall efficiency of transformation was 1 × 10^–4 (calculated per viable protoplast plated). Among kanamycin-resistant lines, 50% showed a high level of GUS activity (above one unit). Southern blot hybridization confirmed the presence of numerous gusA and neo coding sequences in the maize genome. In two analyzed lines, integrated sequences appeared to be organized in tandem head-to-tail repeats. Results also indicated that the integrated sequences were partially methylated.     

Electroporation of Bradyrhizobium japonicum

Summary Electroporation offers a fast, efficient and reproducible way to introduce DNA into bacteria. We have successfully used this technique to transform two commercially important strains of Bradyrhizobium japonicum, the nitrogen-fixing soybean symbiont. Initially, electroporation conditions were optimized using plasmid DNA which had been prepared from the same B. japonicum strain into which the{imDNA was to b}e transformed. Efficiencies of 10⁵-10⁶ transformants/g DNA were obtained for strains USDA 110 and 61A152 with ready-to-use frozen cells. Successful electroporation of B. japonicum with plasmid DNA prepared from Escherichia coli varied with the E. coli strain from which the plasmid was purified. The highest transformation efficiencies (10⁴ transformants/g DNA) were obtained using DNA prepared from a dcm ^– dam ^– strain of E. coli. This suggests that routine isolation of DNA from an E. coli strain incapable of DNA modification should help in increasing transformation efficiencies for other strains of bacteria where DNA restriction appears to be a significant obstacle to successful transformation. We have also monitored the rate of spontaneous mutation in electroporated cells and saw no significant difference in the frequency of streptomycin resistance for electroporated cells compared to control cells.     

Transformation of spheroplasts and protoplasts of Corynebacterium glutamicum

Summary Spheroplasts were prepared from Corynebacterium glutamicum ATCC13032 by growing cells in the presence of glycine followed by digestion with lysozyme. Using pUL330 a spheroplast transformation system was established routinely yielding 10³ to 10⁴ transformants per g of plasmid DNA. Spheroplasts were converted into protoplasts after incubation with the lytic enzyme achromopeptidase in the presence of additional lysozyme. Protoplasts prepared by this method regenerated at efficiencies of 10 to 30%. A protoplast transformation system was established routinely yielding 10⁵ to 10⁶ transformants per g of plasmid DNA. The Escherichia coli Brevibacterium lactofermentum shuttle vector pUL62 prepared from E. coli could be introduced into spheroplasts of C. glutamicum after heat treatment at 48 to 49°C for 10 min.     

Cloning and expression of Candida albicans ADE2 and proteinase genes on a replicative plasmid in C. albicans and in Saccharomyces cerevisiae.

Summary A plasmid vector (denoted pRC2312) was constructed, which replicates autonomously in Escherichia coli, Saccharomyces cerevisiae and Candida albicans. It contains LEU2, URA3 and an autonomously replicating sequence (ARS) from C. albicans for selection and replication in yeasts, and bla (ampicillin resistance) and ori for selection and replication in E. coli. S. cerevisiae AH22 (Leu^–) was transformed by pRC2312 to Leu^– at a frequency of 1.41 × 10⁵ colonies per g DNA. Transformation of C. albicans SGY-243 (Ura-) to Ura⁺ with pRC2312 resulted in smaller transformant colonies at a frequency of 5.42 × 10³ per g DNA where the plasmid replicated autonomously in transformed cells, and larger transformant colonies at a frequency of 32 per g DNA, in which plasmid integrated into the genome. Plasmid copy number in yeasts was determined by a DNA hybridization method and was estimated to be 15±3 per haploid genome in S. cerevisiae and 2–3 per genome in C. albicans replicative transformants. Multiple tandem integration occurred in integrative transformants and copy number of the integrated sequence was estimated to be 7–12 per diploid genome. The C. albicans ADE2 gene was ligated into plasmid pRC2312 and the construct transformed Ade^– strains of both C. albicans and S. cerevisiae to Ade⁺. The vector pRC2312 was also used to clone a fragment of C. albicans genomic DNA containing an aspartic proteinase gene. C. albicans transformants harboring this plasmid showed a two-fold increase in aspartic proteinase activity. However S. cerevisiae transformants showed no such increase in proteinase activity, suggesting the gene was not expressed in S. cerevisiae.     

Progress in leaf protoplast isolation and culture from virus-free axenic shoot cultures of Vitis vinifera L.

Axenic shoot cultures of virus-free Vitis vinifera L. cv. Soultanina were a highly efficient source for isolation of viable protoplasts. Optimum results were obtained with leaves of 50–100 mg fresh weight, leaf discs of 0.7 cm in diameter, 100 and 15 U ml^-1 Cellulase R-10 and Macerozyme R-10, respectively, and 18 h reaction time in either light or in darkness. Protoplast yield was approx. 25×10⁶ viable protoplasts per g fresh weight and their size ranged from 12 to 44 m. During a 20-day culture period, the maximum survival rate obtained was approx. 40%. A plating density of 10×10⁵ protoplasts per ml resulted in increased survival rates. Various growth regulators and glutamine did not significantly improve survival rates of protoplasts, whereas extract from coconut added to the culture medium caused an increase in the survival rates of protoplasts. Cell elongation at a significant rate and divisions were observed. [¹⁴C]glucose uptake was studied as an index of cell membrane integrity and functioning. Uptake rate of glucose by protoplasts was linear for up to 60 min, fully inhibited by NaN₃, with an optimum pH of 4.8. Protoplasts 24 h old exhibited significantly lower rates of glucose uptake.     

Electric field mediated stable transformation of carrot protoplasts with naked DNA

We have developed an electroporation procedure for the transformation of carrot protoplasts with Ti-plasmid DNA from Agrobacterium tumefaciens. The uptake of pTiC58 into carrot protoplasts was mediated by high voltage electrical pulses at field strengths from 0.5 to 3.8 kV/cm. Protoplast regeneration, somatic embryogenesis and plantlet regeneration were unaffected by the electroporation conditions selected for DNA uptake. Uptake of plasmid pTiC58 resulted in hormone independent regeneration of carrot protoplasts. Transformed somatic embryos were detected in carrot cultures 45 days after electroporation. The transformed somatic embryos developed into teratomas which synthesized nopaline. Hybridization was obtained between a labeled T-DNA fragment from pTiC58 and DNA fragments from 4 month old teratomas regenerated from electro-transformed protoplasts. Based on the number of somatic embryos regenerated after electro-transformation, a frequency of 1.6×10² transformants/10⁴ somatic embryos/g pTiC58 DNA was obtained.Abbreviations PEG polyethylene glycol - 2,4-D 2,4-dichlorophenoxyacetic acid - MES morpholinoethane sulfonic acid - DMSO dimethyl sulfoxide - HSV Herpes Simplex virus - TK thymidine kinase     

Optimization of transformation procedures in avermectin high-producing Streptomyces avermitilis

The optimal pH conditions for efficient transformation of protoplasts and intact cells were established in avermectin high-producing mutants, ATCC31780 and L-9. Among all factors tested, protoplast buffer pH was elucidated as the most important factor influencing transformation efficiency. The optimal pH of the protoplast buffer for the regeneration of ATCC31780 was 6.5, and using this condition, 4.5 × 10⁶ transformants per g of pIJ702 were produced. At pH 6.3, the maximal number of L-9 transformants was 1.6 × 10⁵ per g of the same plasmid. However, the protoplasting process decreased avermectin productivity to half or one-sixth of ATCC31780 or L-9, respectively. To avoid the productivity loss, electroporation of intact cells without lysozyme treatment was developed for these mutant strains even though this method was approximately 100-fold less efficient. In this method, the initial pH of culture medium was elucidated as a critical factor and optimized for both transformation efficiency and avermectin productivity.     

Regeneration of transformed shoots from electroporated soybean (Glycine max (L.) Merr.) protoplasts

Stable transformation of soybean (Glycine max (L.) Merr.) protoplasts isolated from immature cotyledons was achieved following electroporation with plasmid DNA carrying chimeric genes encoding ß-glucuronidase (GUS) and hygromycin phosphotransferase (HPT) under the control of the cauliflower mosaic virus (CaMV) 35S promoter. Transformed colonies were stringently selected by growing 15-day-old protoplast-derived cells in the presence of 40 g/ml of hygromycin-B for 6 weeks. Over 93% of the resistant cells and colonies exhibited GUS activity, indicating that the two marker genes borne on a single plasmid were co-introduced and co-expressed at a very high freguency. This transformation procedure reproducibly yields transformants at frequencies of 2.9–6.8 × 10^–4 (based on the number of protoplasts electroporated) or 23.0% (based on the number of control microcalli formed) counted after 6 weeks of selection. After repeated subculturing on regeneration medium, shoots were induced from 8.0% of the transformed calli. Southern hybridization confirmed the presence of both the GUS and hygromycin genes in the transformed calli and shoots.     

Optimum conditions for efficient transformation ofStreptomyces venezuelae protoplasts

Summary Optimum conditions for protoplast regeneration and transformation ofStreptomyces venezuelae ETH 14630 have been established. Protoplasts from mycelium grown to the stationary phase and treated with lysozyme in P medium under mild conditions gave the best regeneration frequency. Transformation of protoplasts with naked DNA was very efficient using either polyethylene glycol of mol. wt. 4000 or 6000, at concentrations of 28.5% or 36% (w/v) respectively. About 10⁵ transformants/g DNA could be isolated using protoplasts derived from cells cultivated to the early exponential growth phase in LB medium containing 0.2%-0.6% glycine and subsequently treated at 30°–32°C with 20 mg lysozyme/ml in P medium for 30 min. Selection of the transformants occurred on MRYE plates containing less than 10⁵ regenerating protoplasts per plate. Higher protoplast densities considerably decreased the regeneration frequency of the transformants.     

Plant regeneration from patchouli protoplasts encapsulated in alginate beads

Mesophyll protoplasts were isolated from leaves of in vitro grown patchouli (Pogostemon cablin Benth.). The protoplasts were encapsulated in alginate beads, approximately 2–3×10³ protoplasts per 25 l bead. Successful colony formation was induced when the protoplast beads were inoculated into a liquid medium supplemented with 10^-6 M NAA and 10^-5 M BA. The frequency of colony formation was improved greatly by the inclusion of several beads per ml medium. To induce high colony formation for a single bead, it was essential to culture protoplasts in the presence of nurse beads containing actively-growing cells of the same species. Rapid regeneration of plants from protoplast-derived calluses was accomplished by a two-step culture procedure with liquid and then solid media. Gas-chromatographic analyses showed that regenerated plants produced an essential oil comprising a full-set of patchouli sesquiterpenes.Abbreviations BA 6-benzylaminopurine - 2,4-D 2,4-dichlorophenoxyacetic acid - f. wt. fresh weight - GC gas chromatography - MES 2-(N-morpholino)ethanesulfonic acid - NAA 1-naphthaleneacetic acid     

Improved conditions for protoplast formation and transformation of Pleurotus ostreatus

Conditions suitable for the production and regeneration of Pleurotus ostreatus protoplasts from dikaryotic mycelia were examined. Three commercially available muralytic enzymes, including Sigma lysing enzyme, Novozym 234 and Novozym 234 LP, were used for production of protoplasts. Over 2 × 10⁷ protoplasts per gram fresh weight mycelia were obtained within 1.5 h by using each of these three enzymes. The colony regeneration rate was up to 13% on potato-dextrose-agar medium containing 0.8 m mannitol. Genetic transformation was based on positive selection for resistance to hygromycin B (HmB) using the plasmid vector pAN7-1 and accomplished by either electroporation or a polyethylene glycol (PEG)-divalent cation method. P. ostreatus strains used in this study have innate sensitivity to HmB at a critical inhibitory concentration of between 40–50 g/ml. Selection for HmB resistance of this fungus, indicative of transformation, resulted in 3–48 HmB-resistant colonies per microgram of pAN7-1 per 10⁷ viable protoplasts. No significant differences were apparent when either transformation protocol or either P. ostreatus strain was used. The best electrical condition found for the electrotransformation of P. ostreatus is at a field strength of 2.6–2.8 kV/cm with a capacitance of 25F and a parallel resistance of 800 ohms, corresponding to a time constant range of 10–14 ms. Correspondence to: P. A. Lemke     

Optimization of polyethylene glycol mediated transient gene expression in pea protoplasts

We have investigated factors influencing polyethylene glycol mediated DNA uptake and ß-glucuronidase expression in pea (Pisum sativum L.) protoplasts. It was found that for optimal \-glucuronidase expression the molecular weight and concentration of polyethylene glycol should be 4000 and 20%, respectively. The amount of plasmid DNA should be 25 g per 5×10⁵ protoplasts in each treatment, and the concentration of Mg²⁺ in the transformation buffer should be 15 mM. The optimized protocol was applicable to all four pea cultivars tested.Abbreviations FDA fluorescein diacetate - GUS ß-glucuronidase - MU 4-methylumbelliferone - MUG 4-methyl umbelliferyl glucuronide - MW molecular weight - PEG polyethylene glycol - X-Gluc 5-bromo-4-chloro-3-indolyl glucuronide     

Electrotransformation of intact cells ofBrevibacterium flavum MJ-233

Summary Electroporation allowed transformation of intact cells ofBrevibacterium flavum MJ-233. The two plasmids used for electroporation were pCRY2 (6.3 kilobases) and pCRY3 (8.2 kilobases). Both plasmids contain the chloramphenicol-resistance gene and the autonomous replication origin inB. flavum MJ-233. The efficiency of electrotransformation was optimal with cells harvested at the middle log phase of growth, and was imporved by the addition of 1.0U/ml of penicillin G to the culture medium. The optimum yield of transformants per g DNA was 5×10⁴ when the cell suspension was pulsed at a cell density of 1×10¹⁰/ml and at a DNA amount of 1.0g.     

Isolation and nucleotide sequence of an autonomously replicating sequence (ARS) element functional in Candida albicans and Saccharomyces cerevisiae

Summary An 8.6-kb fragment was isolated from an EcoRI digest of Candida albicans ATCC 10261 genomic DNA which conferred the property of autonomous replication in Saccharomyces cervisiae on the otherwise non-replicative plasmid pMK155 (5.6 kb). The DNA responsible for the replicative function was subcloned as a 1.2-kb fragment onto a non-replicative plasmid (pRC3915) containing the C. albicans URA3 and LEU2 genes to form plasmid pRC3920. This plasmid was capable of autonomous replication in both S. cerevisiae and C. albicans and transformed S. cerevisiae AH22 (leu2 ^–) to Leu⁺ at a frequency of 2.15 × 10³ transformants per pg DNA, and transformed C. albicans SGY-243 (ura3) to Ura⁺ at a frequency of 1.91 × 10³ transformants per g DNA. Sequence analysis of the cloned DNA revealed the presence of two identical regions of eleven base pairs (5TTTTATGTTTT3) which agreed with the consensus of autonomously replicating sequence (ARS) cores functional in S. cerevisiae. In addition there were two 10/11 and numerous 9/11 matches to the core consensus. The two 11/11 matches to the consensus, CaARS1 and CaARS2, were located on opposite strands in a non-coding AT-rich region and were separated by 107 bp. Also present on the C. albicans DNA, 538 by from the ARS cores, was a gene for 5S rRNA which showed sequence homology with several other yeast 5S rRNA genes. A sub-fragment (494 bp) containing the 5S rRNA gene (but not the region containing the ARS cores) hybridized to genomic DNAs from a number of yeast species, including S. cerevisiae, C. tropicalis, C. pseudotropicalis, C. parapsilosis, C. kruseii, C. (Torulopsis) glabrata and Neurospora crassa. The 709-bp ARS element (but not the 5S rRNA gene) was necessary for high-frequency transformation and autonomous plasmid replication in both S. cerevisiae and C. albicans.EMBL/GenBank database accession number: X16634 (5S rRNA)     

Transformation of tobacco protoplasts with DNA entrapped in pH-sensitive liposomes

A system for the transformation of tobacco mesophyll protoplasts using pH-sensitive liposomes was developed. Plasmid DNA (plGVneo23) encoding the NPT-II gene for kanamycin resistance was entrapped in pH-sensitive liposomes composed of dioleolphosphatidylethanolamine, cholesterol and oleic acid. These liposomes release their contents at low pH and are capable of delivering their contents into the cytoplasm of protoplasts. Kanamycin-resistant colonies were reproducibly recovered from transformed protoplasts at an average frequency of 1.62×10^-4 at pH 7.5. Plants regenerated from transformed cell lines were normal in appearance and were fertile. NPT-II activity was detected in leaf extracts of transformed, kanamycin-resistant plants and the presence of NPT-II DNA in the tobacco genome was shown by Southern blots. Analysis of self-pollinations and reciprocal crosses to non-transformed plants indicated that kanamycin resistance segregated as a dominant nuclear marker. Co-transformation of protoplasts with liposomes containing two selectable markers indicated that co-transformation occurred with a frequency of approximately 23%.Abbreviations DOPE dioleoylphosphatidylethanolamine - DOPC dioleoylphosphatidylcholine - Chol cholesterol - OA oleic acid - PEG polyethylene glycol 6000 - NAA -napthaleneacetic acid - BAP 6-benzylaminopurine     

High frequency transformation of Bacillus subtilis protoplasts by plasmid DNA.

Summary A highly efficient method for transformation of Bacillus subtilis by plasmid DNA is reported. The procedure, which involves polyethylene glycolinduced DNA uptake by protoplasts and subsequent regeneration of the bacterial cell wall, yields up to 80% transformants with an efficiency of 4x10⁷ transformants per g of supercoiled DNA. Plasmids constructed by in vitro ligation or endonuclease-generated fragments of linear plasmid DNA can also transform PEG-treated protoplasts, but at a lower frequency.     

Transformation of the filamentous fungus Gibberella fujikuroi using the Aspergillus niger niaD gene encoding nitrate reductase

Summary A transformation system for Gibberella fujikuroi based on the Aspergillus niger nitrate reductase gene (niaD) was developed. A strain (designated SG140) carrying a non-reverting niaD mutation (niaD11) was generated by screening mutagenised cells for non-growth on nitrate as sole nitrogen source. Transformation frequencies of 1–2 transformants per g DNA were observed when strain SG140 was transformed to nitrate utilisation. Southern blot analyses of niaD⁺ transformants showed that the vector DNA sequences were integrated into the chromosomal DNA. The results demonstrate that the A. niger niaD gene is expressed in G. fujikuroi.     

Electrotransformation ofStreptococcus sanguis Challis

Plasmid DNA was introduced into noncompetent cells ofStreptococcus sanguis Challis by an electrotransformation technique. The procedure was simple and rapid, did not require elaborate pretreatment of cells, and yielded transformant colonies in 24 h. The maximum transformation efficiency attained was 2.1×10⁴ transformants per g of pVA736. Molecular rearrangements and deletions were not detected in plasmid DNA isolated from transformants.