Roles of the fission yeast formin for3p in cell polarity, actin cable formation and symmetric cell division.

BACKGROUND: Both symmetric and asymmetric cell divisions are required for the generation of appropriate cell lineages during development. Wild-type Schizosaccharomyces pombe cells divide in a symmetric fashion to produce two similar rod-shaped daughter cells. Formins are proteins with conserved roles in cell polarity, cytokinesis, and the regulation of actin and microtubule cytoskeletons. RESULTS: Here, we identify and characterize a new S. pombe formin, for3p. for3 Delta mutant cells divide in an asymmetric manner; a mother cell divides medially to produce one daughter cell that develops into a monopolar cell and one daughter that develops into a bipolar cell. Both daughter cells recapitulate similar asymmetric lineages themselves. Inheritance of the bipolar pattern correlates with inheritance of the recent birth scar, not with asymmetry in the spindle pole bodies. for3 Delta mutants lack interphase actin cables and have delocalized actin patch and myo52p (type V myosin) distributions. for3 Delta cells have normal microtubule dynamics and cortical interactions but have defects in microtubule organization and increased numbers of microtubule bundles. for3p-GFP is localized at both cell tips in an actin-dependent manner and at the cell division site. CONCLUSIONS: for3p is a cell polarity factor required for interphase actin cable formation and microtubule organization. The for3 Delta phenotype suggests that cells are able to grow in a polarized manner even in the absence of functional actin cables and polarized distribution of actin patches. for3p and possibly actin cables are part of a regulatory network that ensures that cell divisions are symmetric.     

Adenomatous polyposis coli protein nucleates actin assembly and synergizes with the formin mDia1

The tumor suppressor protein adenomatous polyposis coli (APC) regulates cell protrusion and cell migration, processes that require the coordinated regulation of actin and microtubule dynamics. APC localizes in vivo to microtubule plus ends and actin-rich cortical protrusions, and has well-documented direct effects on microtubule dynamics. However, its potential effects on actin dynamics have remained elusive. Here, we show that the C-terminal “basic” domain of APC (APC-B) potently nucleates the formation of actin filaments in vitro and stimulates actin assembly in cells. Nucleation is achieved by a mechanism involving APC-B dimerization and recruitment of multiple actin monomers. Further, APC-B nucleation activity is synergistic with its in vivo binding partner, the formin mDia1. Together, APC-B and mDia1 overcome a dual cellular barrier to actin assembly imposed by profilin and capping protein. These observations define a new function for APC and support an emerging view of collaboration between distinct actin assembly–promoting factors with complementary activities.     

Overexpression of an Arabidopsis formin stimulates supernumerary actin cable formation from pollen tube cell membrane

Formins, actin-nucleating proteins that stimulate the de novo polymerization of actin filaments, are important for diverse cellular and developmental processes, especially those dependent on polarity establishment. A subset of plant formins, referred to as group I, is distinct from formins from other species in having evolved a unique N-terminal structure with a signal peptide, a Pro-rich, potentially glycosylated extracellular domain, and a transmembrane domain. We show here that overexpression of the Arabidopsis formin AFH1 in pollen tubes induces the formation of arrays of actin cables that project into the cytoplasm from the cell membrane and that its N-terminal structure targets AFH1 to the cell membrane. Pollen tube elongation is a polar cell growth process dependent on an active and tightly regulated actin cytoskeleton. Slight increases in AFH1 stimulate growth, but its overexpression induces tube broadening, growth depolarization, and growth arrest in transformed pollen tubes. These results suggest that AFH1-regulated actin polymerization is important for the polar pollen cell growth process. Moreover, severe membrane deformation was observed in the apical region of tip-expanded, AFH1-overexpressing pollen tubes in which an abundance of AFH1-induced membrane-associated actin cables was evident. These observations suggest that regulated AFH1 activity at the cell surface is important for maintaining tip-focused cell membrane expansion for the polar extension of pollen tubes. The cell surface-located group-I formins may play the integrin-analogous role as mediators of external stimuli to the actin cytoskeleton, and AFH1 could be important for mediating extracellular signals from female tissues to elicit the proper pollen tube growth response during pollination.     

Analysis of the function of Spire in actin assembly and its synergy with formin and profilin

The Spire protein, together with the formin Cappuccino and profilin, plays an important role in actin-based processes that establish oocyte polarity. Spire contains a cluster of four actin-binding WH2 domains. It has been shown to nucleate actin filaments and was proposed to remain bound to their pointed ends. Here we show that the multifunctional character of the WH2 domains allows Spire to sequester four G-actin subunits binding cooperatively in a tight SA(4) complex and to nucleate, sever, and cap filaments at their barbed ends. Binding of Spire to barbed ends does not affect the thermodynamics of actin assembly at barbed ends but blocks barbed end growth from profilin-actin. The resulting Spire-induced increase in profilin-actin concentration enhances processive filament assembly by formin. The synergy between Spire and formin is reconstituted in an in vitro motility assay, which provides a functional basis for the genetic interplay between Spire, formin, and profilin in oogenesis.     

Regulation of the formin for3p by cdc42p and bud6p

Formins are conserved actin nucleators responsible for the assembly of diverse actin structures. Many formins are controlled through an autoinhibitory mechanism involving the interaction of a C-terminal DAD sequence with an N-terminal DID sequence. Here, we show that the fission yeast formin for3p, which mediates actin cable assembly and polarized cell growth, is regulated by a similar autoinhibitory mechanism in vivo. Multiple sites govern for3p localization to cell tips. The localization and activity of for3p are inhibited by an intramolecular interaction of divergent DAD and DID-like sequences. A for3p DAD mutant expressed at endogenous levels produces more robust actin cables, which appear to have normal organization and dynamics. We identify cdc42p as the primary Rho GTPase involved in actin cable assembly and for3p regulation. Both cdc42p, which binds at the N terminus of for3p, and bud6p, which binds near the C-terminal DAD-like sequence, are needed for for3p localization and full activity, but a mutation in the for3p DAD restores for3p localization and other phenotypes of cdc42 and bud6 mutants. In particular, the for3p DAD mutation suppresses the bipolar growth (NETO) defect of bud6Delta cells. These findings suggest that cdc42p and bud6p activate for3p by relieving autoinhibition.     

The myosin passenger protein Smy1 controls actin cable structure and dynamics by acting as a formin damper

Formins are a conserved family of proteins with robust effects in promoting actin nucleation and elongation. However, the mechanisms restraining formin activities in cells to generate actin networks with particular dynamics and architectures are not well understood. In S.?cerevisiae, formins assemble actin cables, which serve as tracks for myosin-dependent intracellular transport. Here, we show that the kinesin-like myosin passenger-protein Smy1 interacts with the FH2 domain of the formin Bnr1 to decrease rates of actin filament elongation, which is distinct from the formin displacement activity of Bud14. In?vivo analysis of smy1Δ mutants demonstrates that this "damper" mechanism is critical for maintaining proper actin cable architecture, dynamics, and function. We directly observe Smy1-3GFP being transported by myosin V and transiently pausing at the neck in a manner dependent on Bnr1. These observations suggest that Smy1 is part of a negative feedback mechanism that detects cable length and prevents overgrowth.     

Tea4p links microtubule plus ends with the formin for3p in the establishment of cell polarity

Microtubules regulate actin-based processes such as cell migration and cytokinesis, but molecular mechanisms are not understood. In the fission yeast Schizosaccharomyces pombe, microtubule plus ends regulate cell polarity in part by transporting the kelch repeat protein tea1p to cell ends. Here, we identify tea4p, a SH3 domain protein that binds directly to tea1p. Like tea1p, tea4p localizes to growing microtubule plus ends and to cortical sites at cell ends, and it is necessary for the establishment of bipolar growth. Tea4p binds directly to and recruits the formin for3p, which nucleates actin cable assembly. During "new end take off" (NETO), formation of a protein complex that includes tea1p, tea4p, and for3p is necessary and sufficient for the establishment of cell polarity and localized actin assembly at new cell ends. Our results suggest a molecular mechanism for how microtubule plus ends regulate the spatial distribution of actin assembly.     

RhoGEF2 and the formin Dia control the formation of the furrow canal by directed actin assembly during Drosophila cellularisation

The physical interaction of the plasma membrane with the associated cortical cytoskeleton is important in many morphogenetic processes during development. At the end of the syncytial blastoderm of Drosophila the plasma membrane begins to fold in and forms the furrow canals in a regular hexagonal pattern. Every furrow canal leads the invagination of membrane between adjacent nuclei. Concomitantly with furrow canal formation, actin filaments are assembled at the furrow canal. It is not known how the regular pattern of membrane invagination and the morphology of the furrow canal is determined and whether actin filaments are important for furrow canal formation. We show that both the guanyl-nucleotide exchange factor RhoGEF2 and the formin Diaphanous (Dia) are required for furrow canal formation. In embryos from RhoGEF2 or dia germline clones, furrow canals do not form at all or are considerably enlarged and contain cytoplasmic blebs. Both Dia and RhoGEF2 proteins are localised at the invagination site prior to formation of the furrow canal. Whereas they localise independently of F-actin, Dia localisation requires RhoGEF2. The amount of F-actin at the furrow canal is reduced in dia and RhoGEF2 mutants, suggesting that RhoGEF2 and Dia are necessary for the correct assembly of actin filaments at the forming furrow canal. Biochemical analysis shows that Rho1 interacts with both RhoGEF2 and Dia, and that Dia nucleates actin filaments. Our results support a model in which RhoGEF2 and dia control position, shape and stability of the forming furrow canal by spatially restricted assembly of actin filaments required for the proper infolding of the plasma membrane.     

Nucleation limits the lengths of actin filaments assembled by formin

Formins stimulate actin polymerization by promoting both filament nucleation and elongation. Because nucleation and elongation draw upon a common pool of actin monomers, the rate at which each reaction proceeds influences the other. This interdependent mechanism determines the number of filaments assembled over the course of a polymerization reaction, as well as their equilibrium lengths. In this study, we used kinetic modeling and in vitro polymerization reactions to dissect the contributions of filament nucleation and elongation to the process of formin-mediated actin assembly. We found that the rates of nucleation and elongation evolve over the course of a polymerization reaction. The period over which each process occurs is a key determinant of the total number of filaments that are assembled, as well as their average lengths at equilibrium. Inclusion of formin in polymerization reactions speeds filament nucleation, thus increasing the number and shortening the lengths of filaments that are assembled over the course of the reaction. Modulation of the elongation rate produces modest changes in the equilibrium lengths of formin-bound filaments. However, the dependence of filament length on the elongation rate is limited by the number of filament ends generated via formin’s nucleation activity. Sustained elongation of small numbers of formin-bound filaments, therefore, requires inhibition of nucleation via monomer sequestration and a low concentration of activated formin. Our results underscore the mechanistic advantage for keeping formin’s nucleation efficiency relatively low in cells, where unregulated actin assembly would produce deleterious effects on cytoskeletal dynamics. Under these conditions, differences in the elongation rates mediated by formin isoforms are most likely to impact the kinetics of actin assembly.     

Dissecting requirements for auto-inhibition of actin nucleation by the formin, mDia1

The mammalian formin, mDia1, is an actin nucleation factor. Experiments in cells and in vitro show that the N-terminal region potently inhibits nucleation by the formin homology 2 (FH2) domain-containing C terminus and that RhoA binding to the N terminus partially relieves this inhibition. Cellular experiments suggest that potent inhibition depends upon the presence of the diaphanous auto-regulatory domain (DAD) C-terminal to FH2. In this study, we examine in detail the N-terminal and C-terminal regions required for this inhibition and for RhoA relief. Limited proteolysis of an N-terminal construct from residues 1-548 identifies two stable truncations: 129-548 and 129-369. Analytical ultracentrifugation suggests that 1-548 and 129-548 are dimers, whereas 129-369 is monomeric. All three N-terminal constructs inhibit nucleation by the full C terminus. Although inhibition by 1-548 is partially relieved by RhoA, inhibition by 129-548 or 129-369 is RhoA-resistant. At the C terminus, DAD deletion does not affect nucleation but decreases inhibitory potency of 1-548 by 20,000-fold. Synthetic DAD peptide binds both 1-548 and 129-548 with similar affinity and partially relieves nucleation inhibition. C-terminal constructs are stable dimers. Our conclusions are as follows: 1) DAD is an affinity-enhancing motif for auto-inhibition; 2) an N-terminal domain spanning residues 129-369 (called DID for diaphanous inhibitory domain) is sufficient for auto-inhibition; 3) a dimerization region C-terminal to DID increases the inhibitory ability of DID; and 4) DID alone is not sufficient for RhoA relief of auto-inhibition, suggesting that sequences N-terminal to DID are important to RhoA binding. An additional finding is that FH2 domain-containing constructs of mDia1 and mDia2 lose >75% nucleation activity upon freeze-thaw.     

Common formin-regulating sequences in Smy1 and Bud14 are required for the control of actin cable assembly in vivo

Formins comprise a large family of proteins with diverse roles in remodeling the actin cytoskeleton. However, the spatiotemporal mechanisms used by cells to control formin activities are only beginning to be understood. Here we dissected Smy1, which has dual roles in regulating formins and myosin. Using mutagenesis, we identified specific sequences in Smy1 critical for its in vitro inhibitory effects on the FH2 domain of the formin Bnr1. By integrating smy1 alleles targeting those sequences, we genetically uncoupled Smy1’s functions in regulating formins and myosin. Quantitative imaging analysis further demonstrated that the ability of Smy1 to directly control Bnr1 activity is crucial in vivo for proper actin cable length, shape, and velocity and, in turn, efficient secretory vesicle transport. A Smy1-like sequence motif was also identified in a different Bnr1 regulator, Bud14, and found to be essential for Bud14 functions in regulating actin cable architecture and function in vivo. Together these observations reveal unanticipated mechanistic ties between two distinct formin regulators. Further, they emphasize the importance of tightly controlling formin activities in vivo to generate specialized geometries and dynamics of actin structures tailored to their physiological roles.     

Molecular characterization of Toxoplasma gondii formin 3, an actin nucleator dispensable for tachyzoite growth and motility

Toxoplasma gondii belongs to the phylum Apicomplexa, a group of obligate intracellular parasites that rely on gliding motility to enter host cells. Drugs interfering with the actin cytoskeleton block parasite motility, host cell invasion, and egress from infected cells. Myosin A, profilin, formin 1, formin 2, and actin-depolymerizing factor have all been implicated in parasite motility, yet little is known regarding the importance of actin polymerization and other myosins for the remaining steps of the parasite lytic cycle. Here we establish that T. gondii formin 3 (TgFRM3), a newly described formin homology 2 domain (FH2)-containing protein, binds to Toxoplasma actin and nucleates rabbit actin assembly in vitro. TgFRM3 expressed as a transgene exhibits a patchy localization at several distinct structures within the parasite. Disruption of the TgFRM3 gene by double homologous recombination in a ku80-ko strain reveals no vital function for tachyzoite propagation in vitro, which is consistent with its weak level of expression in this life stage. Conditional stabilization of truncated forms of TgFRM3 suggests that different regions of the molecule contribute to distinct localizations. Moreover, expression of TgFRM3 lacking the C-terminal domain severely affects parasite growth and replication. This work provides a first insight into how this specialized formin, restricted to the group of coccidia, completes its actin-nucleating activity.     

A role for myosin-I in actin assembly through interactions with Vrp1p, Bee1p, and the Arp2/3 complex

Type I myosins are highly conserved actin-based molecular motors that localize to the actin-rich cortex and participate in motility functions such as endocytosis, polarized morphogenesis, and cell migration. The COOH-terminal tail of yeast myosin-I proteins, Myo3p and Myo5p, contains an Src homology domain 3 (SH3) followed by an acidic domain. The myosin-I SH3 domain interacted with both Bee1p and Vrp1p, yeast homologues of human WASP and WIP, adapter proteins that link actin assembly and signaling molecules. The myosin-I acidic domain interacted with Arp2/3 complex subunits, Arc40p and Arc19p, and showed both sequence similarity and genetic redundancy with the COOH-terminal acidic domain of Bee1p (Las17p), which controls Arp2/3-mediated actin nucleation. These findings suggest that myosin-I proteins may participate in a diverse set of motility functions through a role in actin assembly.     

Pheromone-induced polarization is dependent on the Fus3p MAPK acting through the formin Bni1p

During mating, budding yeast cells reorient growth toward the highest concentration of pheromone. Bni1p, a formin homologue, is required for this polarized growth by facilitating cortical actin cable assembly. Fus3p, a pheromone-activated MAP kinase, is required for pheromone signaling and cell fusion. We show that Fus3p phosphorylates Bni1p in vitro, and phosphorylation of Bni1p in vivo during the pheromone response is dependent on Fus3p. fus3 mutants exhibited multiple phenotypes similar to bni1 mutants, including defects in actin and cell polarization, as well as Kar9p and cytoplasmic microtubule localization. Disruption of the interaction between Fus3p and the receptor-associated Galpha subunit caused similar mutant phenotypes. After pheromone treatment, Bni1p-GFP and Spa2p failed to localize to the cortex of fus3 mutants, and cell wall growth became completely unpolarized. Bni1p overexpression suppressed the actin assembly, cell polarization, and cell fusion defects. These data suggest a model wherein activated Fus3p is recruited back to the cortex, where it activates Bni1p to promote polarization and cell fusion.     

A Highlights from MBoC Selection: Fission yeast profilin is tailored to facilitate actin assembly by the cytokinesis formin Cdc12

The evolutionarily conserved small actin-monomer binding protein profilin is believed to be a housekeeping factor that maintains a general pool of unassembled actin. However, despite similar primary sequences, structural folds, and affinities for G-actin and poly-l-proline, budding yeast profilin ScPFY fails to complement fission yeast profilin SpPRF temperature-sensitive mutant cdc3-124 cells. To identify profilin''s essential properties, we built a combinatorial library of ScPFY variants containing either WT or SpPRF residues at multiple positions and carried out a genetic selection to isolate variants that support life in fission yeast. We subsequently engineered ScPFY(9-Mut), a variant containing nine substitutions in the actin-binding region, which complements cdc3-124 cells. ScPFY(9-Mut), but not WT ScPFY, suppresses severe cytokinesis defects in cdc3-124 cells. Furthermore, the major activity rescued by ScPFY(9-Mut) is the ability to enhance cytokinesis formin Cdc12-mediated actin assembly in vitro, which allows cells to assemble functional contractile rings. Therefore an essential role of profilin is to specifically facilitate formin-mediated actin assembly for cytokinesis in fission yeast.     

Conformational changes in actin filaments induced by formin binding to the barbed end

Formins bind actin filaments and play an essential role in the regulation of the actin cytoskeleton. In this work we describe details of the formin-induced conformational changes in actin filaments by fluorescence-lifetime and anisotropy-decay experiments. The results show that the binding of the formin homology 2 domain of a mammalian formin (mouse mDia1) to actin filaments resulted in a less rigid protein structure in the microenvironment of the Cys374 of actin, weakening of the interactions between neighboring actin protomers, and greater overall flexibility of the actin filaments. The formin effect is smaller at greater ionic strength. The results show that formin binding to the barbed end of actin filaments is responsible for the increase of flexibility of actin filaments. One formin dimer can affect the dynamic properties of an entire filament. Analyses of the results obtained at various formin/actin concentration ratios indicate that at least 160 actin protomers are affected by the binding of a single formin dimer to the barbed end of a filament.