Three-state kinetic folding mechanism of the H2A/H2B histone heterodimer: the N-terminal tails affect the transition state between a dimeric intermediate and the native dimer

The H2A/H2B heterodimer is a component of the nucleosome core particle, the fundamental repeating unit of chromatin in all eukaryotic cells. The kinetic folding mechanism for the H2A/H2B dimer has been determined from unfolding and refolding kinetics as a function of urea using stopped-flow, circular dichroism and fluorescence methods. The kinetic data are consistent with a three-state mechanism: two unfolded monomers associate to form a dimeric intermediate in the dead-time of the SF instrument (approximately 5 ms); this intermediate is then converted to the native dimer by a slower, first-order reaction. Analysis of the burst-phase amplitudes as a function of denaturant indicates that the dimeric kinetic intermediate possesses approximately 50% of the secondary structure and approximately 60% of the surface area burial of the native dimer. The stability of the dimeric intermediate is approximately 30% of that of the native dimer at the monomer concentrations employed in the SF experiments. Folding-to-unfolding double-jump experiments were performed to monitor the formation of the native dimer as a function of folding delay times. The double-jump data demonstrate that the dimeric intermediate is on-pathway and obligatory. Formation of a transient dimeric burst-phase intermediate has been observed in the kinetic mechanism of other intertwined, segment-swapped, alpha-helical, DNA-binding dimers, such as the H3-H4 histone dimer, Escherichia coli factor for inversion stimulation and E.coli Trp repressor. The common feature of a dimeric intermediate in these folding mechanisms suggests that this intermediate may accelerate protein folding, when compared to the folding of archael histones, which do not populate a transient dimeric species and fold more slowly.     

HU and IHF, two homologous histone-like proteins of Escherichia coli, form different protein-DNA complexes with short DNA fragments.

Using the gel retardation technique we have studied the protein-DNA complexes formed between HU--the major histone-like protein of Escherichia coli--and short DNA fragments. We show that several HU heterodimers bind DNA in a regularly spaced fashion with each heterodimer occupying about 9 base pairs. The alpha 2 and beta 2 HU homodimers form the same structure as the alpha beta heterodimer on double stranded DNA. However when compared to the heterodimer, they bind single stranded DNA with higher affinity. We also show that HU and the Integration Host Factor of E. coli (IHF) form different structures with the same DNA fragments. Moreover, HU seems to enhance the DNA-binding capacity of IHF to a DNA fragment which does not contain its consensus sequence.     

Impact of domain interchange on conformational stability and equilibrium folding of chimeric class micro glutathione transferases

Rat micro class glutathione transferases M1-1 and M2-2 are homodimers that share a 78% sequence identity but display differences in stability. M1-1 is more stable at the secondary and tertiary structural levels, whereas its quaternary structure is less stable. Each subunit in these proteins consists of two structurally distinct domains with intersubunit contacts occurring between domain 1 of one subunit and domain 2 of the other subunit. The chimeric subunit variants M(12), which has domain 1 of M1 and domain 2 of M2, and its complement M(21), were used to investigate the conformational stability of the chimeric homodimers M(12)-(12) and M(21)-(21) to determine the contribution of each domain toward stability. Exchanging entire domains between class micro GSTs is accommodated by the GST fold. Urea-induced equilibrium unfolding data indicate that whereas the class micro equilibrium unfolding mechanism (i.e., N(2) <--> 2I <--> 2U) is not altered, domain exchanges impact significantly on the conformational stability of the native dimers and monomeric folding intermediates. Data for the wild-type and chimeric proteins indicate that the order of stability for the native dimer (N(2)) is M2-2 > M(12)-(12) M1-1 approximately M(21)-(21), and that the order of stability of the monomeric intermediate (I) is M1 > M2 approximately M(12) > M(21). Interactions involving Arg 77, which is topologically conserved in GSTs, appear to play an important role in the stability of both the native dimeric and folding monomeric structures.     

Folding mechanism of FIS, the intertwined, dimeric factor for inversion stimulation

FIS, the factor for inversion stimulation, from Escherichia coli and other enteric bacteria, is an interwined alpha-helical homodimer. Size exclusion chromatography and static light scattering measurements demonstrated that FIS is predominately a stable dimer at the concentrations (1-10 microM monomer) and buffer conditions employed in this study. The folding and unfolding of FIS were studied with both equilibrium and kinetic methods by circular dichroism using urea and guanidinium chloride (GdmCl) as the perturbants. The equilibrium folding is reversible and well-described by a two-state folding model, with stabilities at 10 degrees C of 15.2 kcal mol(-1) in urea and 13.5 kcal mol(-1) in GdmCl. The kinetic data are consistent with a two-step folding reaction where the two unfolded monomers associate to a dimeric intermediate within the mixing time for the stopped-flow instrument (<5 ms), and a slower, subsequent folding of the dimeric intermediate to the native dimer. Fits of the burst phase amplitudes as a function of denaturant showed that the free energy for the formation of the dimeric intermediate constitutes the majority of the stability of the folding (9.6 kcal mol(-1) in urea and 10.5 kcal mol(-1) in GdmCl). Folding-to-unfolding double jump kinetic experiments were also performed to monitor the formation of native dimer as a function of folding delay times. The data here demonstrate that the dimeric intermediate is obligatory and on-pathway. The folding mechanism of FIS, when compared to other intertwined, alpha-helical, homodimers, suggests that a transient kinetic dimeric intermediate may be a common feature of the folding of intertwined, segment-swapped, alpha-helical dimers.     

Phosphorylation and formation of hybrid enzyme species test the "half of sites" reactivity of Escherichia coli succinyl-CoA synthetase

Recent sequencing experiments have identified alpha-His246 as the phosphorylation site of Escherichia coli succinyl-CoA synthetase [Buck, D., Spencer, M. E., & Guest, J. R. (1985) Biochemistry 24, 6245-6252]. We have replaced alpha-His246 with an asparagine residue using site-directed mutagenesis techniques. The resulting mutant enzyme (designated H246N) exhibited no enzyme activity, as expected, but was found as a structurally intact, stable tetramer. Small differences in the net charge of H246N and wild-type enzymes were first detected on native polyacrylamide gels. These charge differences were resolved by using native isoelectric focusing gels to further separate the wild-type enzyme into diphosphorylated, monophosphorylated, and unphosphorylated species. The enzyme species were found to be interconvertible upon incubation with the appropriate enzyme substrate(s). Sample mixtures containing increasing molar ratios of H246N (alpha H246N beta)2 to wild-type enzyme (alpha beta)2 were unfolded and then refolded. The refolded enzyme mixtures were analyzed for enzymatic activity and separated on native isoelectric focusing gels. The hybrid enzyme (alpha beta alpha H246N beta) retained a significant amount of enzyme activity and also exhibited substrate synergism (stimulation of succinate in equilibrium succinyl-CoA exchange in the presence of ATP). Substrate synergism with this enzyme has been interpreted as evidence for interaction between active sites in such a way that only a single phosphoryl group is covalently attached to the enzyme at a given time [Wolodko, W. T., Brownie, E.R., O'Connor, M. D., & Bridger, W. A. (1983) J. Biol. Chem. 258, 14116-14119]. On the contrary, we conclude that tetrameric succinyl-CoA synthetase from E. coli is comprised of two independently active dimer molecules associated together to form a "dimer of dimers" that displays substrate synergism within each dimer and not necessarily between dimers.(ABSTRACT TRUNCATED AT 250 WORDS)     

Protein subunit interfaces: heterodimers versus homodimers

Protein dimers are either homodimers (complexation of identical monomers) or heterodimers (complexation of non-identical monomers). These dimers are common in catalysis and regulation. However, the molecular principles of protein dimer interactions are difficult to understand mainly due to the geometrical and chemical characteristics of proteins. Nonetheless, the principles of protein dimer interactions are often studied using a dataset of 3D structural complexes determined by X-ray crystallography. A number of physical and chemical properties govern protein dimer interactions. Yet, a handful of such properties are known to dominate protein dimer interfaces. Here, we discuss the differences between homodimer and heterodimer interfaces using a selected set of interface properties.     

Stabilities of leucine zipper dimers estimated by an empirical free energy method.

The leucine zipper motif is a characteristic amino acid sequence found in dimeric DNA-binding proteins. Computer-generated models for leucine zippers were constructed as alpha-helical coiled dimers with leucine repeated every seventh residue. An empirical Gibbs free energy, delta G, function which incorporates hydrophobic force, electrostatic interactions, and conformational entropy loss as the major intermolecular interactions was used to estimate the delta G of dimer formation in fos, jun, and GCN4 zipper sequences. The calculations showed that complexes known to form stable homo- or heterodimers have favorable (negative) delta G, while other less stable complexes have unfavorable (positive) delta G. Leucines in position d of the coiled coil contribute large hydrophobic stabilization energies while residues in the a position contribute less to dimer stability. Hydrophobic contributions show little sequence specificity, however, and do not contribute significantly to homo/heterodimer preference. Charged residues in the e and g positions, on the other hand, determine homo/heterodimer specificity. In GCN4 homodimers, residues GLU el, Glu b2, Lys g2, and Lys e4 greatly contribute to dimer stability. The preferential stability of fos-jun heterodimer over the jun-jun and fos-fos homodimers is primarily due to the side chains Asp b1, Glu g1, Asp b2, Glu e2, Glu g2, Glu g3, and Lys a5 of the fos helix, and Arg c1, Lys g1, Lys b2, Lys e2, Arg e4, and Glu g4 of the jun helix.     

Structure and catalytic properties of an engineered heterodimer of enolase composed of one active and one inactive subunit

Enolase is a dimeric enzyme that catalyzes the interconversion of 2-phospho-D-glycerate and phosphoenolpyruvate. This reversible dehydration is effected by general acid-base catalysis that involves, principally, Lys345 and Glu211 (numbering system of enolase 1 from yeast). The crystal structure of the inactive E211Q enolase shows that the protein is properly folded. However, K345 variants have, thus far, failed to crystallize. This problem was solved by crystallization of an engineered heterodimer of enolase. The heterodimer was composed of an inactive subunit that has a K345A mutation and an active subunit that has N80D and N126D surface mutations to facilitate ion-exchange chromatographic separation of the three dimeric species. The structure of this heterodimeric variant, in complex with substrate/product, was obtained at 1.85 A resolution. The structure was compared to a new structure of wild-type enolase obtained from crystals belonging to the same space group. Asymmetric dimers having one subunit exhibiting two of the three active site loops in an open conformation and the other in a conformation having all three loops closed appear in both structures. The K345A subunit of the heterodimer is in the loop-closed conformation; its Calpha carbon atoms closely match those of the corresponding subunit of wild-type enolase (root-mean-squared deviation of 0.23 A). The kcat and kcat/Km values of the heterodimer are approximately half those of the N80D/N126D homodimer, which suggests that the subunits in solution are kinetically independent. A comparison of enolase structures obtained from crystals belonging to different space groups suggests that asymmetric dimers can be a consequence of the asymmetric positioning of the subunits within the crystal lattice.     

The coiled coil of in vitro assembled keratin filaments is a heterodimer of type I and II keratins: use of site-specific mutagenesis and recombinant protein expression

Recombinant DNA technology has been used to analyze the first step in keratin intermediate filament (IF) assembly; i.e., the formation of the double stranded coiled coil. Keratins 8 and 18, lacking cysteine, were subjected to site specific in vitro mutagenesis to change one amino acid in the same relative position of the alpha-helical rod domain of both keratins to a cysteine. The mutations lie at position -36 of the rod in a "d" position of the heptad repeat pattern, and thus air oxidation can introduce a zero-length cystine cross-link. Mutant keratins 8 and 18 purified separately from Escherichia coli readily formed cystine homodimers in 2 M guanidine-HCl, and could be separated from the monomers by gel filtration. Heterodimers with a cystine cross-link were obtained when filaments formed by the two reduced monomers were allowed to oxidize. Subsequent ion exchange chromatography in 8.5 M urea showed that only a single dimer species had formed. Diagonal electrophoresis and reverse phase HPLC identified the dimer as the cystine containing heterodimer. This heterodimer readily assembled again into IF indistinguishable from those obtained from the nonmutant counterparts or from authentic keratins. In contrast, the mixture of cystine-stabilized homodimers formed only large aberrant aggregates. However, when a reducing agent was added, filaments formed again and yielded the heterodimer after oxidation. Thus, the obligatory heteropolymer step in keratin IF assembly seems to occur preferentially at the dimer level and not during tetramer formation. Our results also suggest that keratin I and II homodimers, once formed, are at least in 2 M guanidine-HCl a metastable species as their mixtures convert spontaneously into heterodimers unless the homodimers are stabilized by the cystine cross-link. This previously unexpected property of homodimers explains major discrepancies in the literature on the keratin dimer.     

Structural and dynamic requirements for optimal activity of the essential bacterial enzyme dihydrodipicolinate synthase

Dihydrodipicolinate synthase (DHDPS) is an essential enzyme involved in the lysine biosynthesis pathway. DHDPS from E. coli is a homotetramer consisting of a 'dimer of dimers', with the catalytic residues found at the tight-dimer interface. Crystallographic and biophysical evidence suggest that the dimers associate to stabilise the active site configuration, and mutation of a central dimer-dimer interface residue destabilises the tetramer, thus increasing the flexibility and reducing catalytic efficiency and substrate specificity. This has led to the hypothesis that the tetramer evolved to optimise the dynamics within the tight-dimer. In order to gain insights into DHDPS flexibility and its relationship to quaternary structure and function, we performed comparative Molecular Dynamics simulation studies of native tetrameric and dimeric forms of DHDPS from E. coli and also the native dimeric form from methicillin-resistant Staphylococcus aureus (MRSA). These reveal a striking contrast between the dynamics of tetrameric and dimeric forms. Whereas the E. coli DHDPS tetramer is relatively rigid, both the E. coli and MRSA DHDPS dimers display high flexibility, resulting in monomer reorientation within the dimer and increased flexibility at the tight-dimer interface. The mutant E. coli DHDPS dimer exhibits disorder within its active site with deformation of critical catalytic residues and removal of key hydrogen bonds that render it inactive, whereas the similarly flexible MRSA DHDPS dimer maintains its catalytic geometry and is thus fully functional. Our data support the hypothesis that in both bacterial species optimal activity is achieved by fine tuning protein dynamics in different ways: E. coli DHDPS buttresses together two dimers, whereas MRSA dampens the motion using an extended tight-dimer interface.     

Escherichia coli DnaA interacts with HU in initiation at the E. coli replication origin

Escherichia coli HU protein is a dimer encoded by two closely related genes whose expression is growth phase-dependent. As a major component of the bacterial nucleoid, HU binds to DNA non-specifically, but acts at the chromosomal origin (oriC) during initiation by stimulating strand opening in vitro. We show that the alpha dimer of HU is more active than other forms of HU in initiation of an oriC-containing plasmid because it more effectively promotes strand opening of oriC. Other results demonstrate that HU stabilizes the DnaA oligomer bound to oriC, and that the alpha subunit of HU interacts with the N-terminal region of DnaA. These observations support a model whereby DnaA interacts with the alpha dimer or the alphabeta heterodimer, depending on their cellular abundance, to recruit the respective form of HU to oriC. The greater activity of the alpha dimer of HU at oriC may stimulate initiation during early log phase compared with the lesser activity of the alphabeta heterodimer or the beta dimer.     

Biophysical Characterization of the Dimer and Tetramer Interface Interactions of the Human Cytosolic Malic Enzyme

The cytosolic NADP⁺-dependent malic enzyme (c-NADP-ME) has a dimer-dimer quaternary structure in which the dimer interface associates more tightly than the tetramer interface. In this study, the urea-induced unfolding process of the c-NADP-ME interface mutants was monitored using fluorescence and circular dichroism spectroscopy, analytical ultracentrifugation and enzyme activities. Here, we demonstrate the differential protein stability between dimer and tetramer interface interactions of human c-NADP-ME. Our data clearly demonstrate that the protein stability of c-NADP-ME is affected predominantly by disruptions at the dimer interface rather than at the tetramer interface. First, during thermal stability experiments, the melting temperatures of the wild-type and tetramer interface mutants are 8–10°C higher than those of the dimer interface mutants. Second, during urea denaturation experiments, the thermodynamic parameters of the wild-type and tetramer interface mutants are almost identical. However, for the dimer interface mutants, the first transition of the urea unfolding curves shift towards a lower urea concentration, and the unfolding intermediate exist at a lower urea concentration. Third, for tetrameric WT c-NADP-ME, the enzyme is first dissociated from a tetramer to dimers before the 2 M urea treatment, and the dimers then dissociated into monomers before the 2.5 M urea treatment. With a dimeric tetramer interface mutant (H142A/D568A), the dimer completely dissociated into monomers after a 2.5 M urea treatment, while for a dimeric dimer interface mutant (H51A/D90A), the dimer completely dissociated into monomers after a 1.5 M urea treatment, indicating that the interactions of c-NADP-ME at the dimer interface are truly stronger than at the tetramer interface. Thus, this study provides a reasonable explanation for why malic enzymes need to assemble as a dimer of dimers.     

IL-8 single-chain homodimers and heterodimers: interactions with chemokine receptors CXCR1, CXCR2, and DARC.

Covalent single-chain dimers of the chemokine interleukin-8 (IL-8) have been designed to mimic the dimeric form of IL-8 in solution and facilitate the production of heterodimer variants of IL-8. Physical studies indicated that use of a simple peptide linker to join two subunits, while allowing receptor binding and activation, led to self-association of the tethered dimers. However, addition of a single disulfide crosslink between the tethered subunits prevented this multimer from forming, yielding a species of dimer molecular weight. Crosslinked single-chain dimers bind to both IL-8 neutrophil receptors CXCR1 and CXCR2 as well as to DARC, as does a double disulfide-linked dimer with no peptide linker. In addition, neutrophil response to these dimers as measured by chemotaxis or beta-glucuronidase release is similar to that elicited by wild-type IL-8, providing evidence that the dissociation of the dimeric species is not required for these biologically relevant activities. Finally, through construction of single-chain heterodimer mutants, we show that only the first subunit's ELR motif is the single-chain variants.     

A major part of platelet-derived growth factor purified from human platelets is a heterodimer of one A and one B chain

Platelet-derived growth factor, PDGF, purified from human platelets is a disulfide-bonded dimer consisting of two homologous polypeptide chains denoted A and B; it has not been known whether it is a heterodimer or a mixture of homodimers. We present here evidence that a major part of PDGF has a heterodimer structure. A highly homogeneous, 31-kDa PDGF was purified in the presence of protease inhibitors and shown to contain both chains by means of immunoprecipitations with peptide antisera specific for the A and B chains, respectively. The susceptibility of PDGF to mild acid treatment and its chromatographic behavior in reversed-phase high performance liquid chromatography and immobilized metal ion affinity chromatography, as compared to A and B chain homodimers, is consistent with a heterodimer structure. Analysis of PDGF purified according to our routine, large scale procedure revealed the major part to have a heterodimer structure. In addition, B chain homodimers were also found. With the demonstration that a major part of PDGF purified from human platelets occurs as a heterodimer, all three dimeric forms of PDGF have been identified. The following nomenclature to distinguish the various forms is suggested: PDGF-AA, a homodimer of A chains; PDGF-AB, a heterodimer; PDGF-BB, a homodimer of B chains; PDGF, any dimeric form of A or B chains.     

Crystal Structure of a Bivalent Antibody Fab Fragment

We determined the crystal structure to 1.8 Å resolution of the Fab fragment of an affinity-matured human monoclonal antibody (HC84.26.5D) that recognizes the E2 envelope glycoprotein of hepatitis C virus (HCV). Unlike conventional Fabs, which are monovalent monomers, Fab HC84.26.5D assembles into a bivalent domain-swapped dimer in which the two V_L/V_H modules are separated by ~25 Å. In solution, Fab HC84.26.5D exists predominantly as a dimer (~80%) in equilibrium with the monomeric form of the Fab (~20%). Dimerization is mediated entirely by deletion of a single residue, V_HSer113 (Kabat numbering), in the elbow region linking the V_H and C_H1 domains. In agreement with the crystal structure, dimeric Fab HC84.26.5D is able to bind two HCV E2 molecules in solution. This is only the second example of a domain-swapped Fab dimer from among >3000 Fab crystal structures determined to date. Moreover, the architecture of the doughnut-shaped Fab HC84.26.5D dimer is completely different from that of the previously reported Fab 2G12 dimer. We demonstrate that the highly identifiable shape of dimeric Fab HC84.26.5D makes it useful as a fiducial marker for single-particle cryoEM analysis of HCV E2. Bivalent domain-swapped Fab dimers engineered on the basis of HC84.26.5D may also serve as a means of doubling the effective size of conventional Fab–protein complexes for cryoEM.     

The threonine-sensitive homoserine dehydrogenase and aspartokinase activities of Escherichia coli K-12. Incubation of the enzyme in alkaline conditions: dissociation and disulfide-bridge formation.

Aspartokinase I - homoserine dehydrogenase I from Escherichia coli K-12, a homotetrameric enzyme, dissociates into dimers upon alkaline treatment. Both aspartokinase and homoserine dehydrogenase inactivation, as well as desensitazion towards L-threonine, occur in a multi-step process. Dithiothreitol stabilizes a dimeric form retaining full activity and sensitivity; L-homoserine stabilizing another dimeric form devoid of aspartokinase activity and retaining a substantial dehydrogenase activity insensitive toward L-threonine. A model is proposed showing that dissociation into dimers occurs in a first step, the resulting dimer losing both aspartokinase and homoserine dehydrogenase sensitivity in two subsequent steps involving the formation of intrachain disulfide bonds.