头孢菌素酰化酶

7-氨基头孢烷酸(7-amino cephalosporanic acid, 7-ACA)是医药工业合成大多数头孢菌素的重要原料.头孢菌素酰化酶(cephalosporin acylase, CA)催化头孢菌素C(CPC)和戊二酰-7-氨基头孢烷酸(GL-7ACA)的水解反应, 生成7-ACA.根据CA催化底物的不同, 可将其划分为两类：CPC酰化酶和GL-7ACA酰化酶.由CA的同源性、分子质量大小和基因结构, 可以把头孢菌素酰化酶划分为五种;讨论了酶的基本性质.通过CA与N端亲核水解酶(Ntn水解酶)的比较, 推测CA属于Ntn水解酶, 并由此可以进一步理解它们的生理功能.     

GL-7ACA酰化酶表达检测系统的建立

戊二酰－7－氨基头孢烷酸（GL－7ACA）酰化酶能够催化GL－7ACA分解生成7－ACA,后者是工业半合成生产头孢类抗菌素所需的重要前体。为了准确地检测GL－7ACA酰化酶及其突变体的表达,本研究通过构建一系列质粒载体,建立了两个简便有效地测定GL－7ACA酰化酶基因acy表达量的系统,从而可对酶的比活力进行定量。我们将两个报告基因,即儿茶酚双加氧酶基因（xylE)和β－半乳糖苷酶基因（lacZ)分别置于acy基因的下游,使之与acy基因共用一个启动子,进行串联表达,各自构成一个多顺反子系统。实验证明,基因融合后的儿茶酚双加氧酶或β－半乳糖苷酶的活力可以间接反映acy的表达量。     

2-Nitro-5-(6-bromohexanoylamino)benzoic acid test paper method for detecting microorganisms capable of producing cephalosporin acylases.

A novel method for detecting microorganisms capable of producing cephalosporin C (CPC) acylase and/or 7-(4-carboxybutanamido)cephalosporanic acid (GL-7-ACA) acylase has been developed. The method is based on the degradation of 2-nitro-5-(6-bromohexanoylamino)benzoic acid (NBHAB), a chromogenic substrate, into yellow 2-nitro-5-aminobenzoic acid by the action of the CPC acylase or the GL-7-ACA acylase. This method is very sensitive and quite specific, and has been successfully applied to screen the acylases from a variety of bacteria. A large number of colonies isolated on a plate surface from more than 67 samples and several known bacteria were tested by the NBHAB paper. Five NBHAB-positive strains and isolates were obtained. They were further examined by the reaction of their bacterial cells upon CPC and GL-7-ACA, respectively, and by thin-layer chromatography in order to distinguish the CPC acylase from the GL-7-ACA acylase.     

Evolution of an acylase active on cephalosporin C

Semisynthetic cephalosporins are synthesized from 7-amino cephalosporanic acid, which is produced by chemical deacylation or by a two-step enzymatic process of the natural antibiotic cephalosporin C. The known acylases take glutaryl-7-amino cephalosporanic acid as a primary substrate, and their specificity and activity are too low for cephalosporin C. Starting from a known glutaryl-7-amino cephalosporanic acid acylase as the protein scaffold, an acylase gene optimized for expression in Escherichia coli and for molecular biology manipulations was designed. Subsequently we used error-prone PCR mutagenesis, a molecular modeling approach combined with site-saturation mutagenesis, and site-directed mutagenesis to produce enzymes with a cephalosporin C/glutaryl-7-amino cephalosporanic acid catalytic efficiency that was increased up to 100-fold, and with a significant and higher maximal activity on cephalosporin C as compared to glutaryl-7-amino cephalosporanic acid (e.g., 3.8 vs. 2.7 U/mg protein, respectively, for the A215Y-H296S-H309S mutant). Our data in a bioreactor indicate an ~90% conversion of cephalosporin C to 7-amino-cephalosporanic acid in a single deacylation step. The evolved acylase variants we produced are enzymes with a new substrate specificity, not found in nature, and represent a hallmark for industrial production of 7-amino cephalosporanic acid.     

Affinity labeled glutaryl-7-amino cephalosporanic acid acylase C130 can hydrolyze the inhibitor during crystallization

7Beta-bromoacetyl amino cephalosporanic acid (BA-7-ACA), an analog of glutaryl-7-amino cephalosporanic acid (GL-7-ACA), can inhibit and specifically alkylate GL-7-ACA acylase (C130) from Pseudomonas sp.130, forming a carbon-carbon bond between BA-7-ACA and the C-2 on indole ring of Trp-beta4 residue of C130. Here we reported that BA-7-ACA labeled C130 (BA-C130) could self-catalyze the hydrolysis of BA-7-ACA during crystallization process. The hydrolysis was confirmed to be a reaction analogous to the one of GL-7-ACA by comparative matrix-assisted laser desorption/ionization-time of flight (MALDI-TOF) spectrometry analysis. BA-C130 was inactive at room temperature, but in the process of crystallization at 18 degrees C it catalyzed the hydrolysis of BA-7-ACA, and thus made the latter become a substrate. Meanwhile, in crystals, 7-ACA was released but the acetic acid still bound with Trp-beta4, and as a result, the enzyme remained to be inactive. These results demonstrated that Trp-beta4 in the alphabetabetaalpha motif was critical and sensitive for the activity of C130 and also suggested that there was a conformational change induced by deacylation during the process of crystallization.     

The 2.0 A crystal structure of cephalosporin acylase

BACKGROUND: Semisynthetic cephalosporins are primarily synthesized from 7-aminocephalosporanic acid (7-ACA), which is usually obtained by chemical deacylation of cephalosporin C (CPC). The chemical production of 7-ACA includes, however, several expensive steps and requires thorough treatment of chemical wastes. Therefore, an enzymatic conversion of CPC to 7-ACA by cephalosporin acylase is of great interest. The biggest obstacle preventing this in industrial production is that cephalosporin acylase uses glutaryl-7ACA as a primary substrate and has low substrate specificity for CPC. RESULTS: We have solved the first crystal structure of a cephalosporin acylase from Pseudomonas diminuta at 2.0 A resolution. The overall structure looks like a bowl with two "knobs" consisting of helix- and strand-rich regions, respectively. The active site is mostly formed by the distinctive structural motif of the N-terminal (Ntn) hydrolase superfamily. Superposition of the 61 residue active-site pocket onto that of penicillin G acylase shows an rmsd in Calpha positions of 1.38 A. This indicates structural similarity in the active site between these two enzymes, but their overall structures are elsewhere quite different. CONCLUSION: The substrate binding pocket of the P. diminuta cephalosporin acylase provides detailed insight into the ten key residues responsible for the specificity of the cephalosporin C side chain in four classes of cephalosporin acylases, and it thereby forms a basis for the design of an enzyme with an improved conversion rate of CPC to 7-ACA. The structure also provides structural evidence that four of the five different classes of cephalosporin acylases can be grouped into one family of the Ntn hydrolase superfamily.     

Cloning and nucleotide sequencing of a novel 7 beta-(4-carboxybutanamido)cephalosporanic acid acylase gene of Bacillus laterosporus and its expression in Escherichia coli and Bacillus subtilis.

A strain of Bacillus species which produced an enzyme named glutaryl 7-ACA acylase which converts 7 beta-(4-carboxybutanamido)cephalosporanic acid (glutaryl 7-ACA) to 7-amino cephalosporanic acid (7-ACA) was isolated from soil. The gene for the glutaryl 7-ACA acylase was cloned with pHSG298 in Escherichia coli JM109, and the nucleotide sequence was determined by the M13 dideoxy chain termination method. The DNA sequence revealed only one large open reading frame composed of 1,902 bp corresponding to 634 amino acid residues. The deduced amino acid sequence contained a potential signal sequence in its amino-terminal region. Expression of the gene for glutaryl 7-ACA acylase was performed in both E. coli and Bacillus subtilis. The enzyme preparations purified from either recombinant strain of E. coli or B. subtilis were shown to be identical with each other as regards the profile of sodium dodecyl sulfate-polyacrylamide gel electrophoresis and were composed of a single peptide with the molecular size of 70 kDa. Determination of the amino-terminal sequence of the two enzyme preparations revealed that both amino-terminal sequences (the first nine amino acids) were identical and completely coincided with residues 28 to 36 of the open reading frame. Extracellular excretion of the enzyme was observed in a recombinant strain of B. subtilis.     

Two novel engineered bacteria for secretory expression of glutaryl 7-amino-cephalosporanic acid acylase

Two novel engineered bacteria, BL21(DE3)/pETCA1S and TG1/pSuperCA1S, were obtained which can secretory express the gene encoding glutaryl 7-amino-cephalosporanic acid acylase (GL-7ACA acylase) from Pseudomonas sp. 130 with high activity. The growth conditions of transformants for overproduction of GL-7ACA acylase were optimized: in intact cells of BL21(DE3)/pETCA1S and TG1/pSuperCA1S the activity of GL-7ACA acylase was 415 and 600 units g^–1 dry cells, respectively. The highest specific activity of GL-7-ACA acylase is in the intact cell as compared with that of transformants constructed in our laboratory. In fiftieth generation of mutants transferred on agar plates the specific activity of GL-7ACA acylase remained constant.     

Nucleotide sequence and expression in Escherichia coli of the cephalosporin acylase gene of a Pseudomonas strain.

The gene encoding cephalosporin acylase, which hydrolyzes 7-beta-(4-carboxybutanamido)-cephalosporanic acid (GL-7ACA) to 7-aminocephalosporanic acid (7ACA) and glutaric acid, was cloned from a Pseudomonas sp. strain V22 and expressed in Escherichia coli, in a two-cistron system, and the enzyme was purified and characterized. The purified enzyme was composed of two non-identical subunits, their molecular weights were estimated by SDS-PAGE to be 40,000 and 22,000, and had a pI of 4.6. The amino acid sequence of the enzyme, deduced from the nucleotide sequence, showed high similarity (97%) with that of a previously reported acyI-encoded cephalosporin acylase. Cephalosporin acylase also resembles the bacterial gamma-glutamyl transpeptidases (GGTs) with respect to their molecular organization and amino acid sequence, but differs from them with respect to catalytic and immunological properties. Purified enzyme exhibited not only cephalosporin acylase activity, but also GGT activity. The Km values of the enzyme for GL-7ACA and L-gamma-glutamyl-p-nitroanilide were 6.1 and 3.8 mM, respectively. Cephalosporin acylase was not recognized by antibodies prepared against bacterial GGTs.     

Comparative characterization of new glutaryl 7-ACA and cephalosporin C acylases

We performed a comparative characterization of three new cephalosporin acylases which were prepared from E. coli recombinant strains and found originally from Pseudomonas sp. A14, Bacillus laterosporus J1 and Pseudomonas diminuta N176. Both A14 and N176 acylases consisted of two non-identical subunits (α, β) whose molecular weights were 28,000 (α), 61,000 (β) and 26,000 (α), 58,000 (β), respectively, whereas J1 acylase consisted of a single peptide with molecular weight of 70,000. The maximum specific activities of A14, J1 and N176 acylases for glutaryl 7-ACA were 7.1, 5.3 and 100 units/mg, respectively, and that of N176 acylase for cephalosporin C was 3.1 units/mg. The K_m values of glutaryl 7-ACA for A14, J1 and N176 acylases were 2.1, 3.2 and 2.6 mM, respectively, and that of cephalosporin C for N176 acylase was 4.8 mM. A14, J1 and N176 acylases exhibited differential activities for cephalosporins having an aliphatic dicarboxylic acid in the acyl side chain and only N176 acylase showed an activity for cephalosporin C. N176 acylase as well as A14 acylase also showed a weak activity for a cephalosporin derivative having a heterocyclic carboxylic acid in the side chain. A14, J1 and N176 acylases catalyzed the reverse reaction to synthesize glutaryl 7-ACA from 7-ACA and glutaric acid, although the rate of the synthesis was 10 to 10⁵ fold slower than that of hydrolysis. The activities of the cephalosporin acylases were considerably inhibited by the reaction products, 7-ACA and glutaric acid. The types of the inhibition by 7-ACA and glutaric acid were both competitive. A14, J1 and N176 acylases were thermostable, their residual activities exceeding more than 90% after treatment at 50°C for 1 h at their optimal pHs.     

Involvement of arginine and tryptophan residues in catalytic activity of glutaryl 7-aminocephalosporanic acid acylase from Pseudomonas sp. strain GK16

The glutaryl 7-aminocephalosporanic acid (GL-7-ACA) acylase from Pseudomonas sp. strain GK16 is an (alphabeta)2 heterotetramer of two non-identical subunits that are cleaved autoproteolytically from an enzymatically inactive precursor polypeptide. The newly formed N-terminal serine of the beta subunit plays an essential role as a nucleophile in enzyme activity. Chemical modification studies on the recombinant enzyme purified from Escherichia coli revealed the involvement of a single arginine and tryptophan residue, per alphabeta heterodimer of the enzyme, in the catalytic activity of the enzyme. Glutaric acid, 7-aminocephalosporanic acid (7-ACA) (competitive inhibitors) and GL-7-ACA (substrate) could not protect the enzyme against phenylglyoxal-mediated inactivation, whereas except for glutaric acid protection was observed in case of N-bromosuccinimide-mediated inactivation of the enzyme. Kinetic parameters of partially inactivated enzyme samples suggested that while arginine is involved in catalysis, tryptophan is involved in substrate binding.     

Morphological,physiological and enzymatic characteristics of cephalosporin acylase-producing Arthrobacter strain 45-8A

A bacterial strain producing cephalosporin acylases was isolated from soil. The morphological and physiological properties of this strain suggest that it belongs to the genus Arthrobacter, and the isolate was therefore designated Arthrobacter strain 45-8A. Substrate specificity of the enzyme was examined. The enzyme can convert both cephalosporin C and 7-(4-carboxylbutan-amino)cephalosporanic acid to 7-aminocephalosporanic acid. An interesting feature of the acylases is their temperature-dependent regulation. Activity of acylases was detected in strain 45-8A grown at temperature below 30 °C, but was not observed at higher temperature. Arthrobacter strain 45-8A did not exhibit -lactamase activity, even though its resistance to cephalosporin C was very strong (>2000 g/ml). This is quite beneficial for its application in the manufacture of 7-aminocephalosporanic acd.Abbreviations used NBHAB 2-Nitro-5-(6-bromohexanoylamino)-benzoic acid - NIPAB 2-Nitro-5-phenylacetaminobenzoic acid - CPC cephalosporin C - GL-7ACA 7-(4-carboxybutanamino)cephalosporanic acid - 6-APA aminopenicillanic acid - 7-ACA 7-aminocephalosporanic acid - PDAB p-Dimethylaminobenzaldehyde     

一株产多种β-内酰胺类抗生素酰化酶菌株的筛选

为了从大量的候选菌株中快速筛选头孢菌素酰化酶产生菌,设计并合成了一系列头孢菌素酰化酶的底物类似物。这些酰胺类的底物类似物由二部分组成,一部分为与头孢菌素相同或相似的侧链,另外一部分为发色基团或便于检测的基团。它们被酰化酶水解酰胺键以后可以方便快速的检测,因此用于对大量菌株进行快速筛选。采用这些化合物筛选到6株酰化酶阳性菌株。其中菌株ZH0650能够同时水解GL-7ACA和多个底物类似物。进一步研究表明,该菌至少产生3种酰化酶,AD-NABA酰化酶,青霉素G酰化酶和头孢菌素C酰化酶。我们初步纯化了AD-NABA酰化酶和青霉素G酰化酶,并对头孢菌素C酰化酶的活力进行了鉴定。这是首次报道的可以产生青霉素G酰化酶和头孢菌素酰化酶等多种酰化酶的菌株,具有良好的应用前景。     

Cloning and characterization of the genes for two distinct cephalosporin acylases from a Pseudomonas strain.

Pseudomonas sp. strain SE83 converts cephalosporin C and 7 beta-(4-carboxybutanamido)cephalosporanic acid (GL-7ACA) to 7-aminocephalosporanic acid (7ACA). A DNA library of this strain was constructed in Escherichia coli and screened for the ability to deacylate GL-7ACA to 7ACA. Apparently, two distinct genes, designated acyI and acyII, were cloned on 4.8- and 6.0-kilobase-pair BglII fragments, respectively. The enzymes encoded by the two genes showed different substrate specificities, and the acyII-encoded enzyme was found to yield 7ACA from cephalosporin C by direct deacylation. Expression of the two genes in E. coli was strongly dependent on a promoter of the vector. The coding regions for acyI and acyII were localized on the 2.5- and 2.8-kilobase-pair fragments, respectively, by subcloning experiments, and high expression of both genes was obtained by placing them under the control of the lacUV5 promoter. The acyII-encoded enzyme was purified and shown to be composed of two nonidentical subunits with molecular weights of 26,000 and 57,000. Maxicell analysis revealed three acyII-specific polypeptides, two of which corresponded to the above subunits. The third polypeptide with a molecular weight of 83,000 was suggested to be the precursor of both subunits.     

Two-step immobilized enzyme conversion of cephalosporin C to 7-aminocephalosporanic acid

The first large-scale production of 7-aminocephalosporanic acid (7ACA) from cephalosporin C (CPC) using a wholly enzymatic synthesis method is reported here. We produced 7ACA from CPC in as high a molar yield as 85% using the immobilized enzymes D-amino acid oxidase (D-AOD) and glutaryl-7-ACA acylase (GL-acylase). In the first reactor, CPC is converted to keto-adipyl-7-aminocephalosporanic acid (keto-7ACA) using an immobilized D-AOD isolated from a yeast, Trigonopsis variabilis. The keto-7ACA is then spontaneously converted to glutaryl-7-aminocephalosporanic acid (GL-7ACA) via a chemical reaction with hydrogen peroxide. The hydrogen peroxide is also a product of the D-AOD reaction. Near quantitative conversion of the keto-7ACA to GL-7ACA was observed. The second reactor converts GL-7ACA to 7ACA using an immobilized GL-acylase, which was isolated from a reconbinant Escherichia coli. The final 7ACA crystalline product is a high quality product. The reactions are conducted under very mild aqueous conditions: pH 8.0 and 20 degrees to 25 degrees C. The production of desacetyl side products is minimal. This process is currently being implemented on an industrial scale to produce 7ACA. (c) 1995 John Wiley & Sons, Inc.     

Deacylation activity of cephalosporin acylase to cephalosporin C is improved by changing the side-chain conformations of active-site residues

Semisynthetic cephalosporins are primarily synthesized from 7-aminocephalosporanic acid (7-ACA), mainly by environmentally toxic chemical deacylation of cephalosporin C (CPC). Thus, the enzymatic conversion of CPC to 7-ACA by cephalosporin acylase (CA) would be very interesting. However, CAs use glutaryl-7-ACA (GL-7-ACA) as a primary substrate and the enzymes have low turnover rates for CPC. The active-site residues of a CA were mutagenized to various residues to increase the deacylation activity of CPC, based on the active-site conformation of the CA structure. The aim was to generate sterically favored conformation of the active-site to accommodate the D-alpha-aminoadipyl moiety of CPC, the side-chain moiety that corresponds to the glutaryl moiety of GL-7-ACA. A triple mutant of the CA, Q50betaM/Y149alphaK/F177betaG, showed the greatest improvement of deacylation activity to CPC up to 790% of the wild-type. Our current study is an efficient method for improving the deacylation activity to CPC by employing the structure-based repetitive saturation mutagenesis.     

Molecular biology of β-lactam acylases

-Lactam acylases such as penicillin G acylases, penicillin V acylases and glutaryl 7-aminocephalosporanic acid acylases are used in the manufacture of 6-aminopenicillanic acid, 7-aminodesacetoxycephalosporanic acid and 7-aminocephalosporanic acid (7-ACA). Genetically-engineered strains producing 1050 U/g, 3200 U/g and 7000 to 10,000 U/I of penicillin G acylase, penicillin V acylase and glutaryl-7-ACA acylase, respectively, have been developed. The penicillin G acylase studied to date and the glutaryl-7-ACA acylase from Pseudomonas sp. share some common features: the active enzyme molecules are composed of two dissimilar subunits that are generated from respective precursor polypeptide; the proteolytic processing is a post-translational modification which is regulated by temperature; and the Ser residue at the N-terminus of the -sub-unit (Ser²⁹⁰; penicillin G acylase numbering) is implicated as the active site residue. Protein engineering, to generate penicillin G acylase molecules and their precursors with altered sequences, and the structure-function correlation of the engineered molecules are discussed.The authors are with Research and Development, Hindustan Antibiotics Ltd, Pimpri, Pune 411 018, India;     

A bound water molecule is crucial in initiating autocatalytic precursor activation in an N-terminal hydrolase

Cephalosporin acylase is a member of the N-terminal hydrolase family, which is activated from an inactive precursor by autoproteolytic processing to generate a new N-terminal nucleophile Ser or Thr. The gene structure of the precursor cephalosporin acylases generally consists of a signal peptide that is followed by an alpha-subunit, a spacer sequence, and a beta-subunit. The cephalosporin acylase precursor is post-translationally modified into an active heterodimeric enzyme with alpha- and beta-subunits, first by intramolecular cleavage and, second, by intermolecular cleavage. Intramolecular autocatalytic proteolysis is initiated by nucleophilic attack of the residue Ser-1beta onto the adjacent scissile carbonyl carbon. This study determined the precursor structure after disabling the intramolecular cleavage. This study also provides experimental evidence showing that a conserved water molecule plays an important role in assisting the polarization of the OG atom of Ser-1beta to generate a strong nucleophile and to direct the OG atom of the Ser-1beta to a target carbonyl carbon. Intramolecular proteolysis is disabled as a result of a mutation of the residues causing conformational distortion to the active site. This is because distortion affects the existence of the catalytically crucial water at the proper position. This study provides the first evidence showing that a bound water molecule plays a critical role in initiating intramolecular cleavage in the post-translational modification of the precursor enzyme.     

Cloning and sequencing of a novel glutaryl acylase β-subunit gene ofPseudomonas cepacia BY21 from bioinformatics

Pseudomonas cepacia BY21 was found to produce glutaryl acylase that is capable of deacylating glutaryl-7-aminocephalosporanic acid (glutaryl-7-ACA) to 7-aminocephalosporanic acid (7-ACA), which is a starting material for semi-synthetic cephalosporin antibiotics. Amino acids of the reported glutaryl acylases from variousPseudomonas sp. strains show a high similarity (>93% identity). Thus, with the known nucleotide sequences ofPseudomonas glutaryl acylases in GenBank, PCR primers were designed to clone a glutaryl acylase gene fromP. cepacia BY21. The unknown β-subunit gene of glutaryl acylase from chromosomal DNA ofP. cepacia BY21 was cloned successfully by PCR. The β-subunit amino acids ofP. cepacia BY21 acylase (GenBank accession number AY948547) were similar to those ofPseudomonas diminuta KAC-1 acylase except that Asn408 ofP. diminuta KAC-1 acylase was changed to Leu408.     

A novel 7-β-(4-carboxybutanamido)-cephalosporanic acid acylase isolated from Pseudomonas strain C427 and its high-level production in Escherichia coli

We cloned the gene for 7-β-(4-carboxybutanamido)-cephalosporanic acid (GL-7ACA) acylase from Pseudomonas strain C427. The DNA sequence revealed an open reading frame of 2154 bp coding for 718 amino acid residues. The deduced amino acid sequence consists of 4 structural domains: (i) a signal peptide (positions 1–27), (ii) a small subunit of the acylase (positions 28–190), designated as α, (iii) a spacer peptide (positions 191–198), (iv) a large subunit (positions 199–718), designated as β. Plasmids were constructed to direct the synthesis of the acylase in Escherichia coli and the following results were obtained. The active acylase consists of two subunits which are processed from a single precursor protein, removing the spacer peptide during processing. A proportion of active acylase is secreted into the periplasm and the remainder is retained in the cytoplasm. The amount of precursor protein accumulated in the cytoplasm is greatly reduced when plasmids for the acylase lacking the signal sequence are expressed. Therefore, processing is independent of the translocation of the gene product through the cytoplasmic membrane, in contrast to the situation for penicillin G acylase. A high level of active enzyme production was achieved with a plasmid coding for an acylase in which the amino terminal sequence (positions 1–32) of native acylase is replaced by MFPTT.