Effect of polydimethylsiloxane oxygen carriers on the biological bleaching of hardwood kraft pulp by Trametes versicolor

Summary Improving the availability of oxygen by adding polydimethylsiloxanes (PDMS) oxygen carriers to Trametes versicolor cultures increased pulp brightening. The presence of the oxygen carriers in cultures of T. versicolor with hardwood kraft pulp increased the growth rate of the fungus, but not the ultimate biomass yield. The PDMS also stimulated brightening of hardwood kraft pulp by it T. versicolor immobilized in polyurethane foam. A threefold increase in the oxygen uptake rate in T. versicolor cultures with PDMS was observed. This increase can be explained by elevated oxygen transfer rate and attributed to the surfactant properties of PDMS. Offprint requests to: E. ZiomekIssued as NRCC 32760     

Synergistic enhancement of protoplast growth by oxygenated perfluorocarbon and Pluronic F-68

Summary Cell suspension-derived protoplasts of albino Petunia hybrida were grown for 10 d at the interface between aqueous culture medium (KM8P) and an oxygenated (10 mbar for 15 min) perfluorocarbon liquid, perfluorodecalin. Protoplasts synthesised new cell walls and divided normally at the perfluorodecalin/culture medium interface, with a mean viability after 10 d of > 92.0%. The mean plating efficiency of protoplasts was elevated by 37% (P<0.05) following culture at the perfluorodecalin/medium interface, but was unaltered by perfluorodecalin or oxygen separately. The mean plating efficiency of protoplasts cultured at the interface was further increased to a maximium of 52% above control, in the presence of oxygenated perfluorodecalin and KM8P medium supplemented with the non-ionic, co-polymer surfactant, Pluronic F-68 at 0.01% (w/v). These findings demonstrate the effectiveness of oxygenated perfluorodecalin for promoting protoplast growth, by facilitating oxygen delivery. The finding that Pluronic F-68 further increased the plating efficiency of protoplasts cultured at the perfluorocarbon/aqueous interface suggests that these agents improve growth through separate, but cumulative, mechanisms.Abbreviations ATP adenosine triphosphate - PFCs perfluorochemicals - STP standard temperature and pressure     

Effects of perfluorinated oxygen carrier application in yeast, fungi and plant cell suspension cultures

The growth of the yeast Saccharomyces cerevisiae, the fungus Rhizopus nigricans and Nicotiana tabacum cells with perfluorodecalin as an oxygen carrier has been studied. The volumetric mass transfer coefficient (k_La) measured by the dynamic method was higher for the perfluorodecalin oxygenation system than for the conventional aeration system. The results show that perfluorocarbon can be successfully used as an efficient gas carrier, especially for the culture of delicate plant cells. The increase in yeast biomass in the suspension culture aerated by perfluorodecalin was as much as 110% higher than in the culture aerated by air. The fungus R. nigricans grew better when the conventional aeration system was used due to the fact that growth of the mycelium is limited by the transport of oxygen by diffusion in the pellets rather than by interfacial oxygen transport. In the case of isolated tobacco cells, an increase of over 350% in biomass growth was observed for the PFC aeration system.     

Image analysis assessments of perfluorocarbon- and surfactant-enhanced protoplast division

Image analysis has been used to assess the growth of cell suspension-derived protoplasts of Petunia hybrida cv. Comanche at an interface between aqueous culture medium (KM8P), supplemented with 0.01% (w/v) Pluronic F-68, and oxygenated (10 mbar; 10 min) perfluorodecalin. Protoplasts synthesised a new cell wall and entered normal mitotic division which was sustainable to the cell colony/callus stage. This process was accentuated by the collective and additive effects of oxygen, perfluorodecalin and surfactant media supplements. The mean area (mm³) of protoplast-derived cell colonies after 68 days of growth was increased 35 fold over control (media alone) in the presence of these combined treatments. The new cultural regime, leading to improved cell throughput from protoplasts, is discussed primarily in relation to the role of perfluorodecalin as a gas carrier and possible effects of Pluronic F-68 in stimulating cellular uptake of nutrients and/or growth regulators. Image analysis provides a novel and accurate approach to quantifying cell growth responses.Abbreviations dpi dots per inch - FPE final plating efficiency - IPE initial plating efficiency - KM Kao & Michayluk (1975) - PFC Perfluorocarbon - UM Uchimiya & Murashige (1974)     

Polymeric Systems with Antithrombin Activity for Thermally Activated Targeting

Copolymers of N,N-diethylacrylamide and N-acryloylphthalimide with a lower critical solution temperature (LCST) were synthesized by radical copolymerization. Polymeric systems with antithrombin activity and an LCST were prepared via a reaction of amino groups of hirudin with phthalimide groups of the copolymers. On increasing hirudin content, the LCST of the polymeric systems increased. The antithrombin activity of polymeric systems obtained by hirudin immobilization on copolymer carriers was inversely related to the content of the copolymer, amounting to 6% of the activity of native hirudin.     

Efficacy of perfluorodecalin as an oxygen carrier for mouse and rat testes perfused in vitro

Perfluorodecalin is a superior artificial oxygen carrier because of its high oxygen dissolving capacity, low toxicity, and short retention times within tissues. However, the instability of perfluorodecalin emulsions has hindered its application in blood substitutes. The present study addressed two questions. First, is perfluorodecalin deleterious to the endocrine function of testes? This question was examined by comparing testosterone secretion by testes perfused in vitro with medium incorporating either perfluorodecalin or erythrocytes as oxygen carriers. Second, can stable emulsions of perfluorodecalin be attained with the new surfactant Butronic U-1? This question was approached by determining the stability of perfluorodecalin emulsions containing either Butronic U-1 or Pluronic F-68, a proven ineffective surfactant. The experimental results support the efficacy of perfluorodecalin emulsions as oxygen carriers for mouse and rat testes perfused in vitro. Perfluorodecalin emulsions formed with Butronic U-1 were stable during the 4-hr perfusions but not during long-term storage.     

Strategies for promoting division of cultured plant protoplasts: Beneficial effects of oxygenated perfluorocarbon

Summary Assessments have been made of physical and chemical options, alone and in combination, for gaseous manipulation of cassava (Manihot esculenta Crantz.) leaf protoplast cultures. Protoplasts were cultured for 25 d in liquid medium at an initial plating density of 4 × 10⁵ ml^–1 overlying (1) agar-solidified medium (control), (2) agar medium under an oxygen-enriched (10 mbar, 1 min) atmosphere, (3) agar medium supplemented with perfluorodecalin (Flutec ^® PP5), or (4) agar medium supplemented with oxygenated (10 mbar, 15 min) perfluorodecalin. Similar experimental treatments were also set up, with glass rods embedded in the agar medium. The mean initial plating efficiency (IPE) of protoplasts following culture with oxygenated perfluorodecalin without glass rods (6.7 ± 0.6%; n = 3) was over 2-fold greater (P < 0.05) than that of control cultures (2.6 ± 0.2%; n = 3). The mean IPE of protoplasts cultured with oxygenated perfluorodecalin in the presence of glass rods (5.8 ± 0.2%; n = 3) was also over 2-fold greater (P < 0.05) than controls. There was no significant difference between the IPE of protoplasts cultured under an increased oxygen atmosphere or with oxygenated perfluorodecalin, irrespective of the presence of glass rods.     

Poly(dimethyl siloxane) (PDMS) network blends of amphiphilic acrylic copolymers with poly(ethylene glycol)-fluoroalkyl side chains for fouling-release coatings. II. Laboratory assays and field immersion trials

Amphiphilic copolymers containing different amounts of poly(ethylene glycol)-fluoroalkyl acrylate and polysiloxane methacrylate units were blended with a poly(dimethyl siloxane) (PDMS) matrix in different proportions to investigate the effect of both copolymer composition and loading on the biological performance of the coatings. Laboratory bioassays revealed optimal compositions for the release of sporelings of Ulva linza, and the settlement of cypris larvae of Balanus amphitrite. The best-performing coatings were subjected to field immersion tests. Experimental coatings containing copolymer showed significantly reduced levels of hard fouling compared to the control coatings (PDMS without copolymer), their performance being equivalent to a coating based on Intersleek 700?. XPS analysis showed that only small amounts of fluorine at the coating surface were sufficient for good antifouling/fouling-release properties. AFM analyses of coatings under immersion showed that the presence of a regular surface structure with nanosized domains correlated with biological performance.     

Improvement of NaNO2-Oxidizing Activity in Nitrobacter vulgaris by Coentrapment in Polyacrylamide Containing Polydimethylsiloxane Copolymer and DEAE-Sephadex

Removal of nitrite and nitrate from drinking water has attracted great attention in recent years because of the human health risk induced by the exposure to contaminated groundwater and surface water. We have therefore tested a model nitrite oxidation system by coentrapping the NaNO₂ oxidizer Nitrobacter vulgaris with polydimethylsiloxane (PDMS) copolymer and DEAE-Sephadex in a polyacrylamide gel. The copolymer and the anion exchanger facilitate the diffusion of oxygen and NaNO₂, respectively, into the gel matrix. To test the nitrite-oxidizing activity, the entrapped cells were coupled to a thermal sensor. Coentrapment of 5% (wt/vol) DEAE-Sephadex with Nitrobacter vulgaris increased the nitrite-oxidizing activity by a factor of 3.7 compared to entrapped cells alone, and by the addition of 0.86% (wt/vol) artificial oxygen carrier PDMS copolymer increased the activity further to 4.3 times higher. Operational and storage stability of the coentrapped N.vulgaris also improved. This suggests that this enhanced immobilized cell system can also be used for nitrite oxidation to nitrate in drinking water as an on-line thermally monitored bioreactor.     

Amphiphilic block copolymer/poly(dimethylsiloxane) (PDMS) blends and nanocomposites for improved fouling-release

Amphiphilic diblock copolymers, Sz6 and Sz12, consisting of a poly(dimethylsiloxane) block (average degree of polymerisation = 132) and a PEGylated-fluoroalkyl modified polystyrene block (Sz, average degree of polymerisation = 6, 12) were prepared by atom transfer radical polymerization (ATRP). Coatings were obtained from blends of either block copolymer (1–10 wt%) with a poly(dimethylsiloxane) (PDMS) matrix. The coating surface presented a simultaneous hydrophobic and lipophobic character, owing to the strong surface segregation of the lowest surface energy fluoroalkyl chains of the block copolymer. Surface chemical composition and wettability of the films were affected by exposure to water. Block copolymer Sz6 was also blended with PDMS and a 0.1 wt% amount of multiwall carbon nanotubes (CNT). The excellent fouling-release (FR) properties of these new coatings against the macroalga Ulva linza essentially resulted from the inclusion of the amphiphilic block copolymer, while the addition of CNT did not appear to improve the FR properties.     

Effect of PAR irradiance intensity on Phaeocystis antarctica (Prymnesiophyceae) growth and DMSP,DMSO, and acrylate concentrations

Phaeocystis antarctica forms extensive spring blooms in the Southern Ocean that coincide with high concentrations of dimethylsulfoniopropionate (DMSP), dimethylsulfoxide (DMSO), dimethylsulfide (DMS), and acrylate. We determined how concentrations of these compounds changed during the growth of axenic P. antarctica cultures exposed to light-limiting, sub-saturating, and saturating PAR irradiances. Cellular DMSP concentrations per liter cell volume (CV) ranged between 199 and 403 mmol · L_CV⁻¹, with the highest concentrations observed under light-limiting PAR. Cellular acrylate concentrations did not change appreciably with a change in irradiance level or growth, ranging between 18 and 45 mmol · L_CV⁻¹, constituting an estimated 0.2%–2.8% of cellular carbon. Both dissolved acrylate and DMSO increased substantially with irradiance during exponential growth on a per-cell basis, ranging from 0.91 to 3.15 and 0.24 to 1.39 fmol · cell⁻¹, respectively, indicating substantial export of these compounds into the dissolved phase. Average cellular DMSO:DMSP ratios increased 7.6-fold between exponential and stationary phases of batch growth, with a 3- to 13-fold increase in cellular DMSO likely formed from abiotic reactions of DMSP and DMS with reactive oxygen species (ROS). At mM levels, cellular DMSP and acrylate are proposed to serve as de facto antioxidants in P. antarctica not regulated by oxidative stress or changes in ROS. Instead, cellular DMSP concentrations are likely controlled by other physiological processes including an overflow mechanism to remove excess carbon via acrylate, DMS, and DMSO during times of unbalanced growth brought on by physical stress or nutrient limitation. Together, these compounds should aid P. antarctica in adapting to a range of PAR irradiances by maintaining cellular functions and reducing oxidative stress.     

Beneficial effects of enhanced aeration using perfluorodecalin in <Emphasis Type="Italic">Yarrowia lipolytica</Emphasis> cultures for lipase production

The inadequate supply of oxygen to biomass is a critical factor to the productivity of most aerobic submerged fermentations. This happens because oxygen is sparingly soluble in the aqueous media. The use of a second liquid phase of perfluorocarbon (PFC), an oxygen-carrying compound, in the culture medium can increase the availability of oxygen to the microorganisms. The effect of perfluorodecalin on Yarrowia lipolytica cultures was investigated in shake-flask cultures. It was found that the specific growth rate of Y. lipolytica, a strictly aerobic yeast, increases with increasing PFC concentration. Extracellular lipase production was increased with 20% (v/v) of PFC and agitation of 250 rev/min. It was shown that the PFC presence benefitted lipase production and not just its secretion to the extracellular medium.     

Fluorinated/siloxane copolymer blends for fouling release: chemical characterisation and biological evaluation with algae and barnacles

Fouling-release coatings were prepared from blends of a fluorinated/siloxane copolymer with a poly(dimethyl siloxane) (PDMS) matrix in order to couple the low modulus character of PDMS with the low surface tension typical for fluorinated polymers. The content of the surface-active copolymer was varied in the blend over a broad range (0.15–10 wt % with respect to PDMS). X-ray photoelectron spectroscopy depth profiling analyses were performed on the coatings to establish the distribution of specific chemical constituents throughout the coatings, and proved enrichment in fluorine of the outermost layers of the coating surface. Addition of the fluorinated/siloxane copolymer to the PDMS matrix resulted in a concentration-dependent decrease in settlement of barnacle, Balanus amphitrite, cyprids. The release of young plants of Ulva, a soft fouling species, and young barnacles showed that adhesion strength on the fluorinated/siloxane copolymer was significantly lower than the siloxane control. However, differences in adhesion strength were not directly correlated with the concentration of copolymer in the blends.     

Improvement of NaNO2-oxidizing activity in Nitrobacter vulgaris by coentrapment in polyacrylamide containing polydimethylsiloxane copolymer and DEAE-sephadex

Removal of nitrite and nitrate from drinking water has attracted great attention in recent years because of the human health risk induced by the exposure to contaminated groundwater and surface water. We have therefore tested a model nitrite oxidation system by coentrapping the NaNO2 oxidizer Nitrobacter vulgaris with polydimethylsiloxane (PDMS) copolymer and DEAE-Sephadex in a polyacrylamide gel. The copolymer and the anion exchanger facilitate the diffusion of oxygen and NaNO2, respectively, into the gel matrix. To test the nitrite-oxidizing activity, the entrapped cells were coupled to a thermal sensor. Coentrapment of 5% (wt/vol) DEAE-Sephadex with Nitrobacter vulgaris increased the nitrite-oxidizing activity by a factor of 3.7 compared to entrapped cells alone, and by the addition of 0.86% (wt/vol) artificial oxygen carrier PDMS copolymer increased the activity further to 4.3 times higher. Operational and storage stability of the coentrapped N.vulgaris also improved. This suggests that this enhanced immobilized cell system can also be used for nitrite oxidation to nitrate in drinking water as an on-line thermally monitored bioreactor.     

Enhanced production of poly(3-hydroxybutyrate-<Emphasis Type="Italic">co</Emphasis>-4-hydroxybutyrate) copolymer with manipulated variables and its properties

Cupriavidus sp. USMAA1020, a local isolate was able to biosynthesis poly(3-hydroxybutyrate-co-4-hydroxybutyrate) [P(3HB-co-4HB)] copolymer with various 4HB precursors as the sole carbon source. Manipulation of the culture conditions such as cell concentration, phosphate ratio and culture aeration significantly affected the synthesis of P(3HB-co-4HB) copolymer and 4HB composition. P(3HB-co-4HB) copolymer with 4HB compositions ranging from 23 to 75 mol% 4HB with various mechanical and thermal properties were successfully produced by varying the medium aeration. The physical and mechanical properties of P(3HB-co-4HB) copolymers were characterized by NMR spectroscopy, gel-permeation chromatography, tensile test, and differential scanning calorimetry. The number-average molecular weights (M _n) of copolymers ranged from 260 × 10³ to 590 × 10³Da, and the polydispersities (M _w/M _n) were between 1.8 and 3.0. Increases in the 4HB composition lowered the molecular weight of these copolymers. In addition, the increase in 4HB composition affected the randomness of copolymer, melting temperature (T _m), glass transition temperature (T _g), tensile strength, and elongation to break. Enzymatic degradation of P(3HB-co-4HB) films with an extracellular depolymerase from Ochrobactrum sp. DP5 showed that the degradation rate increased proportionally with time as the 4HB fraction increased from 17 to 50 mol% but were much lower with higher 4HB fraction. Degradation of P(3HB-co-4HB) films with lipase from Chromobacterium viscosum exhibited highest degradation rate at 75 mol% 4HB. The biocompatibility of P(3HB-co-4HB) copolymers were evaluated and these copolymers have been shown to support the growth and proliferation of fibroblast cells.     

Biosynthesis and characterization of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) produced by Burkholderia cepacia D1

Copolyesters of 3-hydroxybutyrate (3HB) and 3-hydroxyvalerate (3HV) were produced by Burkholderia cepacia D1 at 30°C in nitrogen-free culture solutions containing n-butyric acid and/or n-valeric acid. When n-valeric acid was used as the sole carbon source, the 3HV fraction in copolyester increased from 36 to 90 mol% as the concentration of n-valeric acid in the culture solution increased from 1 to 20 g/l. The addition of n-butyric acid to the culture solution resulted in a decrease in the 3HV fraction in copolyester. The copolymers biosynthesized by this method were mixtures of random copolymers having a wide variety of composition of the 3HV component. The melting points of the fractionated copolymers show a concave curve with the minimum at the 3HV content of ≈40 mol%. The a-parameter of lattice indices of the P(3HB) crystal for the fractionated copolymers largely increased as the 3HV composition increased. Biodegradability of the copolymer increased with the lower content of 3HV composition and/or the lower crystallinity.     

Amphiphilic hydrolyzable polydimethylsiloxane-b-poly(ethyleneglycol methacrylate-co-trialkylsilyl methacrylate) block copolymers for marine coatings. II. Antifouling laboratory tests and field trials

Abstract

Poly(dimethylsiloxane) (PDMS) elastomer coatings containing an amphiphilic hydrolyzable diblock copolymer additive were prepared and their potential as marine antifouling and antiadhesion materials was tested. The block copolymer additive consisted of a PDMS first block and a random poly(trialkylsilyl methacrylate (TRSiMA, R?=?butyl, isopropyl)-co-poly(ethyleneglycol) methacrylate (PEGMA) copolymer second block. PDMS-b-TRSiMA block copolymer additives without PEGMA units were also used as additives. The amphiphilic character of the coating surface was assessed in water using the captive air bubble technique for measurements of static and dynamic contact angles. The attachment of macro- and microorganisms on the coatings was evaluated by field tests and by performing adhesion tests to the barnacle Amphibalanus amphitrite and the green alga Ulva rigida. All the additive-based PDMS coatings showed better antiadhesion properties to A. amphitrite larvae than to U. rigida spores. Field tests provided meaningful information on the antifouling and fouling release activity of coatings over an immersion period of 23?months.     

Biosynthesis of poly(3-hydroxybutyrate) copolymers by Azotobacter chroococcum 7B: A precursor feeding strategy

A precursor feeding strategy for effective biopolymer producer strain Azotobacter chroococcum 7B was used to synthesize various poly(3-hydroxybutyrate) (PHB) copolymers. We performed experiments on biosynthesis of PHB copolymers by A. chroococcum 7B using various precursors: sucrose as the primary carbon source, various carboxylic acids and ethylene glycol (EG) derivatives [diethylene glycol (DEG), triethylene glycol (TEG), poly(ethylene glycol) (PEG) 300, PEG 400, PEG 1000] as additional carbon sources. We analyzed strain growth parameters including biomass and polymer yields as well as molecular weight and monomer composition of produced copolymers. We demonstrated that A. chroococcum 7B was able to synthesize copolymers using carboxylic acids with the length less than linear 6C, including poly(3-hydroxybutyrate-co-3-hydroxy-4-methylvalerate) (PHB-4MHV) using Y-shaped 6C 3-methylvaleric acid as precursor as well as EG-containing copolymers: PHB–DEG, PHB–TEG, PHB–PEG, and PHB–HV–PEG copolymers using short-chain PEGs (with n?≤?9) as precursors. It was shown that use of the additional carbon sources caused inhibition of cell growth, decrease in polymer yields, fall in polymer molecular weight, decrease in 3-hydroxyvalerate content in produced PHB–HV–PEG copolymer, and change in bacterial cells morphology that were depended on the nature of the precursors (carboxylic acids or EG derivatives) and the timing of its addition to the growth medium.     

Fluorescent 2-aza-epsilon-adenosine derivatives of polyadenylic acid, polyuridylic acid, and polyinosinic acid.

A new fluorescent analog of adenosine, 1,N⁶-etheno-2-aza-adenosine, has been incorporated into polynucleotides by polynucleotide phosphorylase polymerization of 1,N⁶-etheno-2-aza-adenosine-5′-diphosphate and adenosine-5′-diphosphate, uridine-5′-diphosphate, or inosine-5′-diphosphate. These new oligonucletides possess high fluorescence when excited at 358 nm and emit at 495 nm. The ratio of the fluorescent and nonfluorescent portions of the copolymer can be controlled by the initial composition of the 2-aza-ε-adenosine-diphosphate and the corresponding nucleoside diphosphate. Fluorescent copolymers with a ratio varying from 1.6 to 35 have thus been synthesized. The physicochemical study of copolymers containing less than 10% of the 1,N⁶-etheno-2-aza-adenosine moiety showed that they are similar to poly(A), poly(U), or poly(I). Therefore, fluorescence and polarization study of the 1,N⁶-etheno-2-aza-adenosine residues that have been incorporated into the copolymer provides a sensitive indicator for the structure of the copolymer. Potentially these new copolymers may provide unique roles in probing the structure of poly(C) and poly(A) in cellular mRNA.     

Aerobic turnover of dimethyl sulfide by the anoxygenic phototrophic bacterium Thiocapsa roseopersicina

This is the first report describing the complete oxidation of dimethyl sulfide (DMS) to sulfate by an anoxygenic, phototrophic purple sulfur bacterium. Complete DMS oxidation was observed in cultures of Thiocapsa roseopersicina M11 incubated under oxic/light conditions, resulting in a yield of 30.1 mg protein mmol^–1. No oxidation of DMS occurred under anoxic/light conditions. Chloroform, methyl butyl ether, and 3-amino-1,2,4-triazole, which are specific inhibitors of aerobic DMS oxidation in thiobacilli and hyphomicrobia, did not affect DMS oxidation in strain M11. This could be due to limited transport of the inhibitors through the cell membrane. The growth yield on sulfide as sole electron donor was 22.2 mg protein mmol^–1 under anoxic/light conditions. Since aerobic respiration of sulfide would have resulted in yields lower than 22 mg protein mmol^–1, the higher yield on DMS under oxic/light conditions suggests that the methyl groups of DMS have served as an additional carbon source or as an electron donor in addition to the sulfide moiety. The kinetic parameters V _max and K _m for DMS oxidation under oxic/light conditions were 12.4 ± 1.3 nmol (mg protein)^–1 min^–1 and 2 μM, respectively. T. roseopersicina M11 also produced DMS by cleavage of dimethylsulfoniopropionate (DMSP). Specific DMSP cleavage rates increased with increasing initial substrate concentrations, suggesting that DMSP lyase was only partly induced at lower initial DMSP concentrations. A comparison of T. roseopersicina strains revealed that only strain M11 was able to oxidize DMS and cleave DMSP. Both strain M11 and strain 5811 accumulated DMSP intracellularly during growth, while strain 1711 showed neither of these characteristics. Phylogenetic comparison based on 16S rRNA gene sequence revealed a similarity of 99.0% between strain M11 and strain 5811, and 97.6% between strain M11 and strain 1711. DMS and DMSP utilization thus appear to be strain-specific. Received: 26 March 1999 / Accepted: 18 June 1999