首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 31 毫秒
1.
Pseudomonas cellulosa xylanase 10A (Pc Xyn10A) contains an extended substrate binding cleft comprising three glycone (-1 to -3) and four aglycone (+1 to +4) subsites and, typical of retaining glycoside hydrolases, exhibits transglycosylation activity at elevated substrate concentrations. In a previous study [Charnock, S. J., et al. (1997) J. Biol. Chem. 272, 2942-2951], it was demonstrated that the -2 subsite mutations E43A and N44A caused a 100-fold reduction in activity against xylooligosaccharides, but did not influence xylanase activity. This led to the proposal that the low activity of these mutants against xylooligosaccharides was due to nonproductive complex formation between these small substrates and the extended aglycone region of the active site. To test this hypothesis, key residues at the +2 (Asn182), +3 (Tyr255), and +4 (Tyr220) subsites were substituted for alanine, and the activity of the mutants against polysaccharides and oligosaccharides was evaluated. All the aglycone mutants exhibited greatly reduced or no transglycosylating activity, and the triple mutants, E43A/Y220A/Y255A and E43A/N182A/Y255A, had activity against xylotriose similar to that of E43A. The aglycone mutations caused an increase in both k(cat) and K(m) against xylan, with N182A/Y220A/Y255A and N182A/Y255A exhibiting 25- and 15-fold higher k(cat) values, respectively, than wild-type Pc Xyn10A. These data indicate that Glu43 plays a role in binding xylooligosaccharides, but not xylan, suggesting that the mechanisms by which Pc Xyn10A binds polysaccharides and oligosaccharides are distinct. The increased k(cat) of the mutants against xylan indicates that the aglycone region of wild-type Pc Xyn10A restricts the rate of catalysis by limiting diffusion of the cleaved substrate, generated at the completion of the k(2) step, out of the active site.  相似文献   

2.
Elucidating the molecular mechanisms regulating multimodularity is a challenging task. Paenibacillus barcinonensis Xyn10C is a 120-kDa modular enzyme that presents the CBM22/GH10/CBM9 architecture found in a subset of large xylanases. We report here the three-dimensional structure of the Xyn10C N-terminal region, containing the xylan-binding CBM22-1–CBM22-2 tandem (Xyn10C-XBD), which represents the first solved crystal structure of two contiguous CBM22 modules. Xyn10C-XBD is folded into two separate CBM22 modules linked by a flexible segment that endows the tandem with extraordinary plasticity. Each isolated domain has been expressed and crystallized, and their binding abilities have been investigated. Both domains contain the R(W/Y)YYE motif required for xylan binding. However, crystallographic analysis of CBM22-2 complexes shows Trp-308 as an additional binding determinant. The long loop containing Trp-308 creates a platform that possibly contributes to the recognition of precise decorations at subsite S2. CBM22-2 may thus define a subset of xylan-binding CBM22 modules directed to particular regions of the polysaccharide. Affinity electrophoresis reveals that Xyn10C-XBD binds arabinoxylans more tightly, which is more apparent when CBM22-2 is tested against highly substituted xylan. The crystal structure of the catalytic domain, also reported, shows the capacity of the active site to accommodate xylan substitutions at almost all subsites. The structural differences found at both Xyn10C-XBD domains are consistent with the isothermal titration calorimetry experiments showing two sites with different affinities in the tandem. On the basis of the distinct characteristics of CBM22, a delivery strategy of Xyn10C mediated by Xyn10C-XBD is proposed.  相似文献   

3.
A third xylanase (Xyn III) from Trichoderma reesei PC-3–7 was purified to electrophoretic homogeneity by gel filtration and ion-exchange chromatographies. The enzyme had a molecular mass of 32 kDa, and its isoelectric point was 9.1. The pH optimum of Xyn III was 6.0, similar to that of Xyn II, another basic xylanase of  T. reesei. The purified Xyn III showed high activity with birchwood xylan but no activity with cellulose and aryl glycoside. The hydrolysis of birchwood xylan by Xyn III produced mainly xylobiose, xylotriose and other xylooligosaccharides. The amino acid sequences of the N-terminus and internal peptides of Xyn III exhibited high homology with the family F xylanases, showing that they were distinct from those of Xyn I and Xyn II of  T. reesei, which belong to family G. These results reveal that Xyn III is a new specific endoxylanase, differing from Xyn I and Xyn II in  T. reesei. It is noteworthy that this novel xylanase was induced only by cellulosic substrates and l-sorbose but not by xylan and its derivarives. Furthermore,  T. reesei PC-3-7 produced Xyn III in quantity when grown on Avicel or lactose as a carbon source, while  T. reesei QM9414 produced little or no Xyn III. Received: 7 November 1997 / Received last revision: 2 February 1988 / Accepted: 23 February 1998  相似文献   

4.
The Clostridium acetobutylicum xylanase gene xyn10B (CAP0116) was cloned from the type strain ATCC 824, whose genome was recently sequenced. The nucleotide sequence of C. acetobutylicum xyn10B encodes a 318-amino acid protein. Xyn10B consists of a single catalytic domain that belongs to family 10 of glycosyl hydrolases. The enzyme was purified from recombinant Escherichia coli. The Xyn10B enzyme was highly active toward birchwood xylan, oat-spelt xylan, and moderately active toward avicel, carboxymethyl cellulose, polygalacturonic acid, lichenan, laminarin, barley--glucan and various p-nitrophenyl monosaccharides. Xyn10B hydrolyzed xylan and xylooligosaccharides to produce xylobiose and xylotriose. The pH optimum of Xyn10B was 5.0, and the optimal temperature was 70°C. The enzyme was stable at 60°C at pH 5.0–6.5 for 1 h without substrate. This is one of a number of xylan-related activities encoded on the large plasmid in C. acetobutylicum ATCC 824.  相似文献   

5.
6.
A number of engineered Trichoderma reesei endo-beta-1,4-xylanase (Xyn II) mutants were created and activity tests were performed for increased stability. The stability of the earlier characterized mutant Y5 (T2C, T28C, K58R, +191D) was further increased by the mutations creating the constructs P9 (N97R+F93W+H144K), P12 (H144C+N92C), P15 (F180Q+H144C+N92C) and P21 (H22K+F180Q+H144C+N92C). The resistance towards thermal inactivation at alkaline pH was increased in all of the mutants. Residual activity T(50%) was increased 4-5 degrees C for P9 at pH 9. The performance of the P9 mutant in sulphate pulp bleaching was also tested and was shown to increase brightness markedly compared to the reference. The bleaching results showed the industrial potential of the obtained mutant.  相似文献   

7.
A thermostable xylanase gene, xyn10A (CAP0053), was cloned from Clostridium acetobutylicum ATCC 824. The nucleotide sequence of the C. acetobutylicum xyn10A gene encoded a 318-amino-acid, single-domain, family 10 xylanase, Xyn10A, with a molecular mass of 34 kDa. Xyn10A exhibited extremely high (92%) amino acid sequence identity with Xyn10B (CAP0116) of this strain and had 42% and 32% identity with the catalytic domains of Rhodothermus marinus xylanase I and Thermoascus aurantiacus xylanase I, respectively. Xyn10A enzyme was purified from recombinant Escherichia coli and was highly active toward oat-spelt and Birchwood xylan and slightly active toward carboxymethyl cellulose, arabinogalactouronic acid, and various p-nitrophenyl monosaccharides. Xyn10A hydrolyzed xylan and xylooligosaccharides larger than xylobiose to produce xylose. This enzyme was optimally active at 60°C and had an optimum pH of 5.0. This is one of a number of related activities encoded on the large plasmid in this strain.  相似文献   

8.
A new xylanase from Paenibacillus barcinonensis BP-23, Xyn11E, has been identified and characterized. Xyn11E has been cloned and heterologously expressed in Escherichia coli. It is a single-domain xylanase belonging to the family 11 of glycosyl hydrolases (GH11) with a predicted molecular weight of 20.652 kDa and an isoelectric point (pI) of 8.7. Substrate specificity, kinetic properties, and mode of action of the purified xylanase were characterized. Xyn11E exhibited high activity toward branched xylans, being beechwood xylan the preferred substrate. The optimum pH and temperature of the purified enzyme were 6.5 and 50 °C, respectively. Catalytic constants were determined on beechwood xylan, on which Xyn11E showed a Km of 12.98 mg/ml and a Vmax of 3,023 U/mg. The enzyme hydrolyzed long xylooligosaccharides, while oligomers shorter than xylotetraose were not degraded. Products released from glucuronoxylans were shorter than those liberated from cereal arabinoxylans. The xylanase was dependent on P. barcinonensis BP-23 LppX for its expression in an active form. Coexpression of Xyn11E with E. coli chaperones could not replace the need of LppX, which seems to act as a specific chaperone for Xyn11E correct folding. Activity of the enzyme on bleached pulps was evaluated. Xyn11E liberated reducing sugars from ECF and TCF pulps from eucalyptus, sisal, and flax, which makes it a good candidate for the enzymatic-assisted production of high-cellulose-content pulps from paper-grade pulps.  相似文献   

9.
In all organisms studied to date, 8-oxoguanine (GO), an important oxidation product of guanine, is removed by highly conserved GO DNA glycosylases. The hyperthermophilic crenarchaeon Pyrobaculum aerophilum encodes a GO DNA glycosylase, Pa-AGOG (Archaeal GO DNA glycosylase) which has become the founding member of a new family within the HhH-GPD superfamily of DNA glycosylases based on unique structural and functional characteristics. In this study, we made quantitative measurements of the DNA glycosylase activity of Pa-AGOG wild type and some engineered variants under single turnover conditions. The mutagenesis study includes residues Trp222 (W222A and W222F), Trp69 (W69F), Gln31 (Q31S) and Lys147 (K147Q) all of which are involved in GO recognition and Asp172 (D172N and D172Q) and Lys140 (K140Q) that are involved in catalysis. Pa-AGOG prefers GO/G mispairs for both base excision and base excision/β-lyase activities. The mutagenesis studies show that base-stacking between GO and Trp222 is very important for recognition. The contact between Trp69 and the 8-oxo group was found to be dispensable, while that to N7 by Gln31 is indispensable for GO recognition. In contrast to human OGG1 the catalytic mutant, D172Q did not show detectable glycosylase activity. Pa-AGOG mutants K140Q, D172N and D172Q did bind GO containing single-stranded DNA more tightly than double-stranded DNA containing a GO/C base pair. Our studies confirm and extend the unique characteristics of Pa-AGOG, which distinguish it from other mesophilic and thermostable GO DNA glycosylases.  相似文献   

10.
A metagenomic library was generated using microbial DNA extracted from the rumen contents of a grass hay-fed dairy cow using a bacterial artificial chromosome-based vector system. Functional screening of the library identified a gene encoding a potent glycoside hydrolase, xyn10N18, localised within a xylanolytic gene cluster consisting of four open-reading frames (ORFs). The ORF, xyn10N18, encodes an endo-β-1,4-xylanase with a glycosyl hydrolase family 10 (GH10) catalytic domain, adopts a canonical α8/ß8-fold and possesses conserved catalytic glutamate residues typical of GH10 xylanases. Xyn10N18 exhibits optimal catalytic activity at 35 °C and pH 6.5 and was highly stable to pH changes retaining at least 85 % relative catalytic activity over a broad pH range (4.0–12.0). It retained 25 % of its relative activity at both low (4 °C) and high (55 °C) temperatures, however the stability of the enzyme rapidly decreased at temperatures of >40 °C. The specific activity of Xyn10N18 is enhanced by the divalent cations Mn2+ and Co2+ and is dramatically reduced by Hg2+ and Cu2+. Interestingly, EDTA had little effect on specific activity indicating that divalent cations do not function mechanistically. The enzyme was highly specific for xylan containing substrates and showed no catalytic activity against cellulose. Analysis of the hydrolysis products indicated that Xyn10N18 was an endoxylanase. Through a combination of structural modelling and in vitro enzyme characterisation this study provides an understanding of the mechanism and the substrate specificity of this enzyme serving as a starting point for directed evolution of Xyn10N18 and subsequent downstream use in industry.  相似文献   

11.
To investigate the roles of the active site residues in the catalysis of Bacillus thuringiensis WB7 chitinase, twelve mutants, F201L, F201Y, G203A, G203D, D205E, D205N, D207E, D207N, W208C, W208R, E209D and E209Q were constructed by site-directed mutagenesis. The results showed that the mutants F201L, G203D, D205N, D207E, D207N, W208C and E209D were devoid of activity, and the loss of the enzymatic activities for F201Y, G203A, D205E, W208R and E209Q were 72, 70, 48, 31 and 29%, respectively. The pH-activity profiles indicated that the optimum pH for the mutants as well as for the wildtype enzyme was 8.0. E209Q exhibited a broader active pH range while D205E, G203A and F201Y resulted in a narrower active pH range. The pH range of activity reduced 1 unit for D205E, and 2 units for G203A and F201Y. The temperature-activity profiles showed that the optimum temperature for other mutants as well as wildtype enzyme was 60°C, but 50°C for G203A, which suggested that G203A resulted in a reduction of thermostability. The study indicated that the six active site residues involving in mutagenesis played an important part in WB7 chitinase. In addition, the catalytic mechanisms of the six active site residues in WB7 chitinase were discussed.  相似文献   

12.
A cellulase free thermostable xylanase from Streptomyces sp. CS428 was isolated from a Korean soil sample, purified by single-step chromatography, and biochemically characterized. The extracellular xylanase was purified 26 fold with a 55% yield by CM Trisacryl cation exchange chromatography. The molecular mass of the enzyme (Xyn428) was approximately 37 kDa. Xyn428 was found to be stable over a broad pH range (4 to ~13.6) and to 50 °C and have an optimum temperature of 80 °C. Xyn428 had Km and Vmax values of 102.3 ± 1.2 mg/mL and 3225.4 ± 15 mmol/min mg, respectively, when beechwood xylan was used as substrate. N-terminal sequence of Xyn428 was INRTDHNENSYLEIHNNEAR. CS428 was grown on different agro waste xylan and produced 4197.1 U/mL of xylanase activity in 36 h of cultivation in wheat bran without supplements. Xyn428 activity was inhibited by Tris salt at concentrations above 20 mM, and produced xylose and xylobiose as major products. It was found to degrade agro waste materials by small unit of enzyme (20 U/g) as shown by electron microscopy. As being simple in purification, thermo tolerant, pH stability in broad range and ability to produce xylooligosaccharides show that Xyn428 has potential applications in industries as a biobleaching agent and for xylooligosaccharides production.  相似文献   

13.
Transplantation is useful for elucidating the functions of structural modules and for engineering enzyme properties. Unexpectedly, transplanting a hyper-thermophilic carbohydrate-binding module, CBM9_1-2, into the mesophilic Aspergillus niger GH11 xylanase (Xyn) slightly decreased the thermal inactivation half-life of Xyn. This effect was further investigated by dividing the CBM9_1-2 module into two smaller parts, C1 and C2, which were transplanted into Xyn to create the chimeras Xyn-C1 and Xyn-C2. Both chimeras exhibited higher catalytic activities on xylan than native Xyn. Xyn-C2 exhibited higher binding affinities for both oat spelt and birch wood xylans, and its thermal inactivation half-life (69.3 min) was 4 or 5 times longer than that of Xyn (17.6 min), Xyn-C1 (13.4 min), and the original chimera containing CBM9_1-2 (13.8 min). In contrast, Xyn-C1 exhibited higher binding affinity for oat spelt xylan, but not for birch wood xylan. Through this rational engineering of the fungal xylanase, the C2 sub-module was shown to have a different thermostabilizing effect than the C1 sub-module. The different functions of the smaller parts of a large module can play pivotal roles in transplantation.  相似文献   

14.
Xyn30D from the xylanolytic strain Paenibacillus barcinonensis has been identified and characterized. The enzyme shows a modular structure comprising a catalytic module family 30 (GH30) and a carbohydrate-binding module family 35 (CBM35). Like GH30 xylanases, recombinant Xyn30D efficiently hydrolyzed glucuronoxylans and methyl-glucuronic acid branched xylooligosaccharides but showed no catalytic activity on arabinose-substituted xylans. Kinetic parameters of Xyn30D were determined on beechwood xylan, showing a K(m) of 14.72 mg/ml and a k(cat) value of 1,510 min(-1). The multidomain structure of Xyn30D clearly distinguishes it from the GH30 xylanases characterized to date, which are single-domain enzymes. The modules of the enzyme were individually expressed in a recombinant host and characterized. The isolated GH30 catalytic module showed specific activity, mode of action on xylan, and kinetic parameters that were similar to those of the full-length enzyme. Computer modeling of the three-dimensional structure of Xyn30D showed that the catalytic module is comprised of a common (β/α)(8) barrel linked to a side-associated β-structure. Several derivatives of the catalytic module with decreasing deletions of this associated structure were constructed. None of them showed catalytic activity, indicating the importance of the side β-structure in the catalysis of Xyn30D. Binding properties of the isolated carbohydrate-binding module were analyzed by affinity gel electrophoresis, which showed that the CBM35 of the enzyme binds to soluble glucuronoxylans and arabinoxylans. Analysis by isothermal titration calorimetry showed that CBM35 binds to glucuronic acid and requires calcium ions for binding. Occurrence of a CBM35 in a glucuronoxylan-specific xylanase is a differential trait of the enzyme characterized.  相似文献   

15.
Caldicellulosiruptor lactoaceticus 6A, an anaerobic and extremely thermophilic bacterium, uses natural xylan as carbon source. The encoded genes of C. lactoaceticus 6A for glycoside hydrolase (GH) provide a platform for xylan degradation. The GH family 10 xylanase (Xyn10A) and GH67 α-glucuronidase (Agu67A) from C. lactoaceticus 6A were heterologously expressed, purified and characterized. Both Xyn10A and Agu67A are predicted as intracellular enzymes as no signal peptides identified. Xyn10A and Agu67A had molecular weight of 47.0 kDa and 80.0 kDa respectively as determined by SDS-PAGE, while both appeared as homodimer when analyzed by gel filtration. Xyn10A displayed the highest activity at 80°C and pH 6.5, as 75°C and pH 6.5 for Agu67A. Xyn10A had good stability at 75°C, 80°C, and pH 4.5–8.5, respectively, and was sensitive to various metal ions and reagents. Xyn10A possessed hydrolytic activity towards xylo-oligosaccharides (XOs) and beechwood xylan. At optimum conditions, the specific activity of Xyn10A was 44.6 IU/mg with beechwood xylan as substrate, and liberated branched XOs, xylobiose, and xylose. Agu67A was active on branched XOs with methyl-glucuronic acids (MeGlcA) sub-chains, and primarily generated XOs equivalents and MeGlcA. The specific activity of Agu67A was 1.3 IU/mg with aldobiouronic acid as substrate. The synergistic action of Xyn10A and Agu67A was observed with MeGlcA branched XOs and xylan as substrates, both backbone and branched chain of substrates were degraded, and liberated xylose, xylobiose, and MeGlcA. The synergism of Xyn10A and Agu67A provided not only a thermophilic method for natural xylan degradation, but also insight into the mechanisms for xylan utilization of C. lactoaceticus.  相似文献   

16.
17.
The Clostridium stercorarium xylanase Xyn10B is a modular enzyme comprising two thermostabilizing domains, a family 10 catalytic domain of glycosyl hydrolases, a family 9 carbohydrate-binding module (CBM), and two S-layer homologous (SLH) domains [Biosci. Biotechnol. Biochem., 63, 1596-1604 (1999)]. To investigate the role of this CBM, we constructed two derivatives of Xyn10B and compared their hydrolytic activity toward xylan and some preparations of plant cell walls; Xyn10BdeltaCBM consists of a catalytic domain only, and Xyn10B-CBM comprises a catalytic domain and a CBM. Xyn10B-CBM bound to various insoluble polysaccharides including Avicel, acid-swollen cellulose, ball-milled chitin, Sephadex G-25, and amylose-resin. A cellulose binding assay in the presence of soluble saccharides suggested that the CBM of Xyn10B had an affinity for even monosaccharides such as glucose, galactose, xylose, mannose and ribose. Removal of the CBM from the enzyme negated its cellulose- and xylan-binding abilities and severely reduced its enzyme activity toward insoluble xylan and plant cell walls but not soluble xylan. These findings clearly indicated that the CBM of Xyn10B is important in the hydrolysis of insoluble xylan. This is the first report of a family 9 CBM with an affinity for insoluble xylan in addition to crystalline cellulose and the ability to increase hydrolytic activity toward insoluble xylan.  相似文献   

18.
Two xylanase-encoding genes, named xyn11A and xyn10B, were isolated from a genomic library of Cellulomonas pachnodae by expression in Escherichia coli. The deduced polypeptide, Xyn11A, consists of 335 amino acids with a calculated molecular mass of 34,383 Da. Different domains could be identified in the Xyn11A protein on the basis of homology searches. Xyn11A contains a catalytic domain belonging to family 11 glycosyl hydrolases and a C-terminal xylan binding domain, which are separated from the catalytic domain by a typical linker sequence. Binding studies with native Xyn11A and a truncated derivative of Xyn11A, lacking the putative binding domain, confirmed the function of the two domains. The second xylanase, designated Xyn10B, consists of 1,183 amino acids with a calculated molecular mass of 124,136 Da. Xyn10B also appears to be a modular protein, but typical linker sequences that separate the different domains were not identified. It comprises a N-terminal signal peptide followed by a stretch of amino acids that shows homology to thermostabilizing domains. Downstream of the latter domain, a catalytic domain specific for family 10 glycosyl hydrolases was identified. A truncated derivative of Xyn10B bound tightly to Avicel, which was in accordance with the identified cellulose binding domain at the C terminus of Xyn10B on the basis of homology. C. pachnodae, a (hemi)cellulolytic bacterium that was isolated from the hindgut of herbivorous Pachnoda marginata larvae, secretes at least two xylanases in the culture fluid. Although both Xyn11A and Xyn10B had the highest homology to xylanases from Cellulomonas fimi, distinct differences in the molecular organizations of the xylanases from the two Cellulomonas species were identified.  相似文献   

19.
20.
Endo-β-1, 4-xylanase was cloned from Geobacillus stearothermophilus 1A05583 by PCR. Enzymes with improved catalytic efficiency were obtained using error-prone PCR and a 96-well plate high-throughout screening system. Two variants 1-B8 and 2-H6 were screened from the mutant library containing 9000 colonies, which, when compared with the wild-type enzyme increased the catalytic efficiency (kcat/Km) by 25% and 89%, respectively, acting on beechwood xylan. By sequencing 1-B8 and 2-H6, an identical mutation point H179Y was detected and found to overlap in the active site cleft. Following the introduction of the remaining 19 amino acids into position 179 by site-saturation mutagenesis, the catalytic efficiency of H179F was found to be 3.46-fold that of the wild-type. When Whistidine was substituted by tryptophan, arginine, methionine or proline, the enzyme lost activity. Therefore, the position 179 site may play an important role in regulating the catalytic efficiency.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号