Semi-synthetic approaches to novel penicillins

The first part of this account of the discovery of penicillin, published in last month's issue of TIBS, concluded with the detection of 6-beta-amino-penicillanic acid (6-APA), the nucleus of the penicillin structure. The exploitation of 6-APA led to the preparation of a range of clinically important semi-synthetic penicillins, which is described in this article.     

Enzymatic hydrolysis of penicillin in mixed ionic liquids/water two-phase system

In this paper, an integrated process involving the mixed ionic liquids/water two-phase system (MILWS) is proposed to improve the efficiency for enzymatic hydrolysis of penicillin G. First, hydrophilic [C4mim]BF4 (1-butyl-3-methylimidazolium tetrafluoraborate) and NaH2PO4 salt form an ionic liquids aqueous two-phase system (ILATPS), which could extract penicillin from its fermentation broth efficiently. Second, a hydrophobic [C4mim]PF6 (1-butyl-3-methylimidazolium hexafluoraphosphate) is introduced into the ionic liquids-rich phase of ILATPS containing penicillin and converses it into MILWS. Penicillin is hydrolyzed by penicillin acylase in the water phase of MILWS at pH 5. The byproduct phenylacetic acid (PAA) is partitioned into the ionic liquids mixture phase, while the intended product 6-aminopenicillanic acid (6-APA) is precipitated at this pH. In comparison with a similar butyl acetate/water system (BAWS) at pH 4, MILWS exhibits two advantages. (1) The selectivity between PAA and penicillin is greatly optimized at pH 5 by varying the mole ratio of [C4mim]PF6/[C4mim]BF4 in MILWS, whereas in BAWS the unalterable nature of the organic solvent restricts the optimized pH for maximum selectivity between PAA and penicillin at pH 4. (2) The pH for 6-APA precipitation in BAWS is 4, whereas it shifts to pH 5 in MILWS due to the complexation between negatively charged 6-APA and the cationic surface of the ionic liquids micelle. As a result, the removal of the two products from the enzyme sphere at relatively high pH is permitted in MILWS, which is beneficial for enzymatic activity and stability in comparison with the acidic pH 4 environment in BAWS.     

Formation of 6-Aminopenicillanic Acid, Penicillins, and Penicillin Acylase by Various Fungi

Several penicillin-producing fungi were examined for ability to produce 6-aminopenicillanic acid (6-APA) and penicillin acylase. 6-APA was found in corn steep liquor fermentations of Trichophyton mentagrophytes, Aspergillus ochraceous, and three strains of Penicillium sp. 6-APA was not detected in fermentations of Epidermophyton floccosum although penicillins were produced. 6-APA formed a large part of the total antibiotic production of T. mentagrophytes. The types of penicillins produced by various fungi were identified by paper chromatography, and it was found that all cultures produced benzylpenicillin. T. mentagrophytes and A. ochraceous showed increased yields of benzylpenicillin and the formation of phenoxymethylpenicillin in response to the addition to the fermentation medium of phenylacetic acid and phenoxyacetic acid, respectively. Washed mycelia of the three Penicillium spp. and two high penicillin-yielding strains of P. chrysogenum possessed penicillin acylase activity against phenoxymethylpenicillin. A. ochraceous, T. mentagrophytes, E. floccosum, and Cephalosporium sp. also had penicillin acylase activity against phenoxymethylpenicillin. Only two of the above fungi, T. mentagrophytes and E. floccosum, showed significant penicillin acylase activity against benzylpenicillin; in both cases it was very low. The acylase activity of A. ochraceous was considerably increased by culturing in the presence of phenoxyacetic acid. It is concluded that 6-APA frequently but not invariably accompanies the formation of penicillin, and that penicillin acylase activity against phenoxymethylpenicillin is present in all penicillin-producing fungi.     

Immobilization of permeabilized Escherichia coli cells with penicillin acylase activity.

Escherichia coli cells with penicillin acylase activity were sequentially treated at pH 7.8 with aqueous solutions of N-cetyl-N,N,N-trimethylammonium bromide and glutaraldehyde and then immobilized within porous polyacrylamide beads. The immobilized whole cells showed enhanced hydrolysis rates in the conversion of benzylpenicillin to 6-aminopenicillanic acid (6-APA) compared to untreated cells immobilized and used under identical conditions. The immobilized system showed no apparent loss in enzyme activity when used repeatedly over 90 cycles for 6-APA production from 4% benzylpenicillin.     

Effect of penicillin precursors on antibiotic biosynthesis in various strains]

The regularities of biosynthesis of 6-aminopenicillanic acid (6-APA), benzylpenicillin (BP) and phenoxymethylpenicillin (PMP) by the strains under the investigation did not significantly differ. In the absence of the precursor both the strains mainly synthesized 6-APA. Phenylacetic acid (PAA) and phenoxyacetic acid (POAA) provided directed biosynthesis: the fungus synthesized BP or PMP depending on the precursor nature. When the amount of the precursors was not sufficient, 6-APA was synthesized along with the penicillins. PAA proved to be a more active precursor than POAA. When both precursors were present in the fermentation broth, only BR was synthesized. An important distinction of strain 316A was its increased sensitivity to PAA especially in the initial period. After an increase in the PAA concentration the growth rate of strain 316A lowered to a greater extent than that of strain 284A. This was likely to determine the higher levels of penicillin production by strain 316A in the presence of POAA, a nontoxic precursor. A procedure for supplying the precursors was developed. Under the laboratory conditions it provided high levels of the penicillin production.     

Comparative study of 6-APA production by free and agar immobilized bacteria in nutrient broth culture

In the present study different bacterial samples were isolated from soil of different places of Dibrugarh and screened for biotransformation ability to produce 6-Aminopenicillanic acid. Among ten isolated bacterial samples, three gram positive bacterial samples designated as AKDD-2, AKDD-4 and AKDD-6 showed the production of 6-APA from penicillin G. Assessment of production of 6-APA after incubation in penicillin G (2 mg/ml) by three different samples separately in free and agar immobilization state was done by HPLC analysis. Reusability of immobilized cells was found successful up to 14 days.     

Specificity of Penicillin Acylase of Fusarium and of Penicillium chrysogenum

Extracts containing penicillin acylase were obtained by shaking the mycelium of Fusarium avenaceum and of Penicillium chrysogenum in 0.2 M sodium acetate or sodium chloride solution. The optimum pH for conversion of penicillin V into 6-aminopenicillanic acid (6-APA) by the enzyme of Fusarium was about 7.5, and the reaction velocity was increased by a rise in temperature from 27 to 37 C. Penicillin G and penicillins with an aliphatic side chain were cleaved much less readily than was penicillin V. With the enzyme preparation obtained from a nonpenicillin-producing strain of P. chrysogenum, the reaction rate was higher at pH 8.5 than at pH 7.5 and pH 6.5. The acylase of P. chrysogenum hydrolyzes penicillin V more readily than penicillin G. In a series of aliphatic penicillins, the amount of 6-APA formed through the action of this enzyme increased with the number of carbon atoms of the side chain. Penicillins with a glutaryl or an adipyl group as side chain were unaffected by the enzyme of Fusarium and of Penicillium. No reaction was observed upon incubation of penicillin N (with a D-aminoadipyl side chain) or isopenicillin N (with an L-aminoadipyl side chain) with Fusarium and Penicillium extract. When the carboxy group of the side chain of these penicillins was esterified, formation of 6-APA was observed upon incubation with Penicillium extract, whereas no 6-APA or only very small amounts were obtained by acylase of Fusarium.     

固定化青霉素酰化酶在光-pH敏感可回用两水相中裂解青霉素G为6-APA

两水相体系在发展中存在的关键问题是相体系回收困难.由于生产成本及降低污染的原因, 用过的相体系需要回收和重复使用.用环境敏感型溶解可逆聚合物形成可回用两水相体系是当前是为可行的回收方法。本文在光敏感可回用高聚物PNBC与pH敏感型可回用高聚物PADB形成的两水相体系中进行固定化青霉素酰化酶的相转移催化青霉素G产生6-APA的反应。在这个两水相体系中,通过优化,在1% NaCl 存在下,６－ＡＰＡ的分配系数可达5.78。催化动力学显示,达平衡的时间近7h,反应最高得率约85.3%（pH 7.8, 20℃）。较相近条件下的单水相反应得率提高近20%。在反应过程中,通过底物及产物的分配系数检测,发现底物分配系数变化不大,而产物6-APA及苯乙酸的分配系数发生很大变化,从而引起产物的得率变化。在两水相中,底物及产物主要分配在上相,固定化酶分配在下相,底物青霉素G进入下相经酶催化产生的6-APA及苯乙酸又转入上相,从而解除了青霉素酰化酶催化反应的底物及产物抑制作用,达到提高产物得率的效果。此外,采用固定化酶较固定化细胞效率高,占用下相体积小,较游离酶稳定性高,且完全单侧分配在下相。因此,在两水相中进行固定化酶的催化反应具有明显的优越性。形成两水相的高聚物PNBC通过488 nm 的激光照射或经滤光的450nm 光源照射得到回收;pH敏感型成相聚合物PADB可通等电点 4.1沉淀可实现循环利用,高聚物的回收率在95%-98%之间,按此回收率计算,聚合物可使用60次以上。     

Early discoveries in the penicillin series.

It is now 50 years since the therapeutic potential of penicillin was first demonstrated. This first antibiotic and the series of compounds derived from it have been of immense importance in modern medicine. This article describes the early search for more potent penicillin derivatives, culminating with the discovery of an intermediate of penicillin biosynthesis, 6-beta-amino penicillanic acid (6-APA). A companion article in next month's TIBS will chart the subsequent exploitation of 6-APA and the preparation of a range of clinically important semi-synthetic penicillins.     

Application of cross-linked enzyme aggregates of Bacillus badius penicillin G acylase for the production of 6-aminopenicillanic acid

AIMS: Optimization of 6-aminopenicillanic acid (6-APA) production using cross-linked enzyme aggregates (CLEA) of Bacillus badius penicillin G acylase (PAC). METHODS AND RESULTS: CLEA-PAC was prepared using purified/partially purified PAC with phenylacetic acid as active-site blocking agent and glutaraldehyde as cross-linker. Conversion of penicillin G to 6-APA by CLEA-PAC was optimized using response surface methodology (RSM) (central composite rotatable design) consisting of a three-factor-two-level pattern with 20 experimental runs. CONCLUSION: Nearly, 80% of immobilization yield was obtained when partially purified enzyme was used for the preparation of CLEA-PAC. Quantitative conversion of penicillin G to 6-APA was observed within 60 min and the CLEA-PAC was reusable for 20 repeated cycles with 100% retention of enzyme activity. SIGNIFICANCE AND IMPACT OF THE STUDY: The faster conversion of penicillin G to 6-APA by CLEA-PAC and efficient reusability holds a strong potential for the industrial application.     

Kinetic studies on the mechanism of the penicillin amidase-catalysed synthesis of ampicillin and benzylpenicillin

Hydrophobic protein chromatography was used to prepare homogeneous fractions of penicillin amidase (EC 3.5.1.11) from E. coli. The apparent ratios of the rate constants for the deacylation of the acyl-penicillin amidase formed in the hydrolysis of phenylacetylglycine or D-phenylglycine methyl ester, by H2O and 6-aminopenicillanic acid (6-APA), were determined at different concentrations of the latter compound. The ratios were obtained from direct measurements of the initial rates of formation of phenylacetic acid and benzylpenicillin or D-phenylglycine and ampicillin. For the semisynthesis of ampicillin as well as of benzylpenicillin the ratio was found to depend on the concentration of 6-APA. This was observed for heterogeneous and homogeneous enzyme preparations. These results show that 6-APA must be bound to the acyl-enzyme before the deacylation, yielding ampicillin and benzylpenicillin, occurs. The dissociation constant KN for the formation of the complex was estimated to be approximately 10mM. This mechanism in which acyl-enzyme with and without bound nucleophile is involved, is in agreement with the principle of microscopic reversibility. Both acyl-enzymes can be deacylated by H2O. The finding that there is a specific binding site for 6-APA adjacent to the binding site for the phenylacetyl-(D-phenylglycyl-) group in the active site of the enzyme is supported by the observation that 6-APA acts as a mixed inhibitor in the hydrolysis of D-phenylglycine methyl ester. The ionic strength dependence indicates that the binding site for 6-APA of the acyl-enzyme is positively charged.     

Penicillin Acylase of Pseudomonas melanogenum KY 3987

Partially purified penicillin acylases (EC 3.5.1.11) were prepared from Pseudomonas melanogenum KY 3987 and Kluyvera citrophila KY 3641 capable of synthesizing d(–)-α-amino-benzylpenicillin (APc) from 6-aminopenicillanic acid (6-APA) and phenylglycine methyl ester. As the cell-free extract of P. melanogenum contained high levels of penicillinase (EC 3.5.2.6), the acylase was separated completely from the penicillinase by use of Sephadex column chromatography or electrofocusing. The most salient property of the P. melanogenum penicillin acylase was its substrate specificity to penicillin substrates: it could form 6-APA only from APc but not from penicillin G, penicillin V and p-aminobenzylpenicillin, whereas the K. citrophila acylase acted on all of these penicillins. The P. melanogenum enzyme is hence considered a novel type of penicillin acylase.     

Acyl coenzyme A: 6-aminopenicillanic acid acyltransferase from Penicillium chrysogenum and Aspergillus nidulans

A study of the final stages of the biosynthesis of the penicillins in Penicillium chrysogenum has revealed two types of enzyme. One hydrolyses phenoxymethyl penicillin to 6-aminopenicillanic acid (6-APA). The other, also obtained from Aspergillus nidulans, transfers a phenylacetyl group from phenylacetyl CoA to 6-APA. The acyltransferase, purified to apparent homogeneity, had a molecular mass of 40 kDa. It also catalyses the conversion of isopenicillin N (IPN) to benzylpenicillin (Pen G) and hydrolyses IPN to 6-APA. In the presence of SDS it dissociates, with loss of activity, into fragments of ca 30 and 10.5 kDa, but activity is regained when these fragments recombine in the absence of SDS.     

Some Problems Involved in Ampicillin Formation by Kluyvera’s Penicillin Acylase

The cell growth of Kluyvera citrophila KY3641, capable of producing α-aminobenzyl-penicillin (APc) from 6-aminopenicillanic acid (6-APA) and phenylglycine, was stimulated by glutamic acid, serine or proline, or by pH control with tartaric acid or fumaric acid.

Penicillinase produced in an early stage of growth or pH-controlled culture was inactivated by alkaline treatment (incubation of cells at 40°C for 5 to 24 hr in pH 7.5 to 9.5) without inactivation of penicillin acylase. Surface active agents enhanced APc production. On the other hand, phenylalanine and some inorganic compounds inhibited this production.

This bacterium formed APc from penicillin G, but amounts of APc formed were only 9 μg from 20 mg of penicillin G.     

Production of lovastatin examined by an integrated approach based on chemometrics and DOSY-NMR

The penicillin acylase-catalyzed synthesis of ampicillin by acyl transfer from D-(-)-phenylglycine amide (D-PGA) to 6-aminopenicillanic acid (6-APA) becomes more effective when a judiciously chosen pH gradient is applied in the course of the process. This reaction concept is based on two experimental observations: 1) The ratio of the initial synthesis and hydrolysis rates (V(S)/V(H)) is pH-dependent and exhibits a maximum at pH 6.5-7.0 for a saturated solution of 6-APA; 2) at a fixed 6-APA concentration below saturation, V(S)/V(H) increases with decreasing pH. Optimum synthetic efficiency could, therefore, be achieved by starting with a concentrated 6-APA solution at pH 7 and gradually decreasing the pH to 6.3 in the course of 6-APA consumption. A conversion of 96% of 6-APA and 71% of D-PGA into ampicillin was accomplished in an optimized procedure, which significantly exceeds the efficiency of enzymatic synthesis performed at a constant pH of either 7.0 or 6.3.     

Analysis of penicillin V biosynthesis during fed-batch cultivations with a high-yielding strain of Penicillium chrysogenum

Metabolites (both intra- and extracellular) involved in penicillin biosynthesis were measured during fed-batch cultivations with a high-yielding strain of Penicillium chrysogenum. The fed-batch cultivations were carried out on a complex medium containing corn steep liqour. Three distinct phases were observed: (a) a rapid growth phase where free amino acids present in the medium are metabolized, (b) a linear growth phase, and (c) a stationary phase. The specific penicillin production (r _p) is initially high and, during the rapid growth phase, it increases slightly. During the linear growth phase r _p is approximately constant [4–6 mg penicillin V (g dry weight)^–1 h^–1 depending on the operating conditions], whereas it decreases during the stationary phase. During the cultivations the tripeptide Aad-Cys-Val (the first metabolite in penicillin biosynthesis) and 8-hydroxypenillic acid (formed by carboxylation of 6-aminopenicillanic acid, 6-APA) were found to accumulate in the medium, whereas the concentrations of isopenicillin N and 6-APA were found to be approximately constant and low. About 3% of the Aad-Cys-Val formed in the first step of the penicillin biosynthetic pathway is lost to the medium and 4% of the isopenicillin N formed in the second step of the pathway is lost as extracellular isopenicillin N, 6-APA or 8-hydroxypenillic acid. Also the cyclic form of -aminoadipic acid, 6-oxopiperidine-2-carboxylic acid, was found to accumulate in the medium and it was found to be formed in an approximately constant ratio to penicillin V of 6 mol/100 mol.     

颗粒状固定化青霉素酰化酶的研究

将巨大芽孢杆菌 (Bacillusmegaterium)胞外青霉素酰化酶通过共价键结合到聚合物载体EupergitC颗粒环氧基团上 ,制成的颗粒状固定化青霉素酰化酶表现活力达 1 40 0 μ/g左右。固定化酶水解青霉素的最适 pH8 0 ,最适温度为 55℃。在pH6 0～ 8 5、温度低于 40℃时固定化酶活力稳定。在 pH8 0、温度 37℃时 ,固定化酶对青霉素的表现米氏常数Ka为 2×1 0 - 2 mol/L ;苯乙酸为竞争性抑制剂 ,抑制常数Kip为 2 8× 1 0 - 2 mol/L ;6 APA为非竞争性抑制剂 ,抑制常数Kia为 0 1 2 5mol/L。固定化酶水解青霉素 ,投料浓度为 8% ,在使用 2 0 0批后 ,保留活力 80 %左右 ,6 APA收率平均达 89 48%。     

Ca2+ and calmodulin antagonists inhibit the proton gradients associated with non-cyclic and cyclic photophosphorylation in spinach chloroplasts

The synthesis of benzylpenicillin (BP) after mixing phenyl-acetyl-glycine(PAG), 6-aminopenicillanic acid (6-APA) and free or immobilized penicillin amidase (E.C.3.5.1.11.) was studied as a function of pH and ionic strength. Before the final equilibrium was reached a kinetically controlled synthesis of BP was observed. Then a transient maximum concentration in BP much larger than the final equilibrium content was synthesized in the acyl-transfer process. The factors influencing this maximum have been analyzed. Increasing ionic strength markedly decreased the maximum in BP and the rate of deacylation of phenyl-acetyl-penicillin amidase by 6-APA. The change was largest when the enzyme was immobilized in a positively charged support, where at low ionic strength the concentration of 6-APA around the enzyme is larger than the bulk concentration due to the partitioning of charged solutes.     

Kinetically controlled acylation of 6-APA catalyzed by penicillin acylase from Streptomyces lavendulae: effect of reaction conditions in the enzymatic synthesis of penicillin V

Abstract

Enzymatic synthesis of penicillin V (penV) by acylation of 6-aminopenicillanic acid (6-APA) was carried out using methyl phenoxyacetate (MPOA) as activated acyl donor and soluble penicillin acylase from Streptomyces lavendulae (SlPVA) as biocatalyst. The effect of different reaction conditions on penV synthesis was investigated, such as enzyme concentration, pH, molar ratio of 6-APA to MPOA, as well as presence of DMSO as water-miscible co-solvent at different concentrations. Time-course profiles of all reactions followed the typical pattern of kinetically controlled synthesis (KCS) of β-lactam antibiotics: penV concentration reached a maximum (highest yield or Y_max) and then decreased gradually. Such maximum was higher at pH 7.0, observing that final penV concentration was abruptly reduced when basic pH values were employed in the reaction. Under the selected conditions (100?mM Tris/HCl buffer pH 7.0, 30?°C, 2.7% (v/v) DMSO, 20?mM MPOA, 0.3 UI/ml of SlPVA), Y_max was enhanced by increasing the substrate molar ratio (6-APA to MPOA) up to 5, reaching a maximum of 94.5% and a S/H value of 16.4 (ratio of synthetic activity to hydrolytic activity). As a consequence, the use of an excess of 6-APA as nucleophile has allowed us to obtain some of the highest Y_max and S/H values among those reported in literature for KCS of β-lactam antibiotics. Although many penicillin G acylases (PGAs) have been described in kinetically controlled acylations, SlPVA should be considered as a different enzyme in the biocatalytic tool-box for novel potential synthetic processes, mainly due to its different substrate specificity compared to PGAs.     

Enzymatic conversion in aqueous two-phase systems: deacylation of benzylpenicillin to 6-aminopenicillanic acid with penicillin acylase

The conversion of benzylpenicillin (BP) to 6-aminopenicillanic acid (6-APA) using penicillin acylase (penicillin amidohydrolase, EC 3.5.1.11) has been studied in aqueous two-phase systems. In a system composed of 8.9% (w/w) PEG 20000/7.6% (w/w) potassium phosphate the enzyme was almost completely partitioned to the bottom phase (K < 0.01), which allowed repeated batch conversions, recirculating the enzyme several times. The initial specific productivities were 0.31–1.47 μmol 6-APA mg protein^?1 min^?1 in repeated conversions over five steps. The yield obtained from the top phase was 0.47–0.71 mol 6-APA mol BP^?1. The results are discussed in relation to recirculating the enzyme by immobilizing it to a solid matrix. Despite the high phosphate concentration in the bottom phase the system needs to be titrated in order for the reaction to proceed. Titration of the top phase alone protected the enzyme from denaturation by strong alkali used for the titration.