Dinuclear sulfide–thiolate complexes [Pt2(μ-S)(μ-SR)(PPh3)4] as cationic metalloligands

The cationic monoalkylated derivatives of the well-known metalloligand [Pt₂(μ-S)₂(PPh₃)₄], viz. [Pt₂(μ-S)(μ-SR)(PPh₃)₄]⁺ (R = n-Bu, CH₂Ph) are themselves able to act as metalloligands towards the Ph₃PAu⁺ and R′Hg⁺ (R′ = Ph or ferrocenyl) fragments, by reaction with Ph₃PAuCl or R′HgCl, respectively. The resulting dicationic products [Pt₂(μ-SR)(μ-SAuPPh₃)(PPh₃)₄]²⁺ and [Pt₂(μ-SR)(μ-SHgR′)(PPh₃)₄]²⁺ are readily isolated as their hexafluorophosphate salts, and have been fully characterised by spectroscopic techniques and an X-ray structure determination on [Pt₂(μ-SR)(μ-SHgFc)(PPh₃)₄](PF₆)₂.     

Structure of [Ni(dippe)(μ-S)]2 and its reaction products. The nucleophilicity of the Ni2S2 fragment

The dimer [(dippe)Ni(μ-S)]₂ reacts with organic electrophiles to give the alkylated species [(dippe)₂Ni₂(μ-S)(μ-SR)]⁺. Stronger alkylating agents lead to double alkylation and cleavage of the dimer. Protonation similarly occurs with strong acids. The structures of several of these species have been determined.     

Ligand induced P---H bond formation and a comparison of the reactivity of two isomers of the carbonyl hydride [Pt2(μ-PBu2)2(H)(CO)(PBu2H)]CF3SO3

The Pt₂ ^(II) isomeric terminal hydrides [(CO)(H)Pt(μ-PBu^t ₂)₂Pt(PBu^t ₂H)]CF₃SO₃ (1a), and [(CO)Pt(μ-PBu^t ₂)₂Pt(PBu^t ₂H)(H)]CF₃SO₃ (1b), react rapidly with 1 atm of carbon monoxide to give the same mixture of two isomers of the Pt₂ ^(I) dicarbonyl [Pt₂(μ-PBu^t ₂)(CO)₂(PBu^t ₂H)₂]CF₃SO₃ (3-Pt); the solid state structure of the isomer bearing the carbonyl ligands pseudo-trans to the bridging phosphide was solved by X-ray diffraction. A remarkable difference was instead found between the reactivity of 1a and 1b towards carbon disulfide or isoprene. In both cases 1b reacts slowly to afford [Pt₂(μ-PBu^t ₂)(μ,η²,η²-CS₂)(PBu^t ₂H)₂]CF₃SO₃ (4-Pt), and [Pt₂(μ-PBu^t ₂)(μ,η²,η²-isoprene) (PBu^t ₂H)₂]CF₃SO₃ (6-Pt), respectively. In the same experimental conditions, 1a is totally inert. A common mechanism, proceeding through the preassociation of the incoming ligand followed by the P---H bond formation between one of the bridging P atoms and the hydride ligand, has been suggested for these reactions.     

Dialkyl-μ-ethylidene-μ-methylene-bis(pentamethylcyclopentadienyl)-dirhodium complexes: synthesis, spectra and decomposition reactions

The dialkyl-μ-ethylidene-μ-methylene-bis (pentamethylcyclopentadienyl)-dirhodium complexes [{(C₅Me₅)Rh}₂(μ-CH₂)(μ-CHMe) (R)₂] (4, P=Me; 5, Et; 6, n-Bu; 7, CH=CH₂; and 8, Z-CH=CHMe) have been prepared from RMgBr and [{(C₅Me₅)Rh}₂(μ-CH₂)(μ-CHMe)(X)₂] (2, X=Cl; 3, X=Br). Structures deduced from the NMR spectra show that the dialkyl complexes can exist in one trans and two cis forms. The decomposition of the dimethyl complex 4 is compared with that of the related di-μ-methylene complex; it reacts readily (30°C, MeCN solution) in the presence of one-electron oxidisers to give propene and methane and a little ethene and some butenes. Mass-spectrometric analysis of the ¹³C labelling in the organics originating from [{(C₅Me₅)Rh}₂(μ-CH₂)(μ-CHMe) (¹³CH₃)₂] shows that methane derives from the Rh---Me, ethene half from the ethylidene and half from coupling of Rh-methyl and a bridging methylene, while the propene arises almost entirely from the ethylidene and a rhodium methyl. The butenes come from coupling of ethylidene, methylene and a Rh-methyl, but only quite small amounts are formed; thus C+C coupling is the major decomposition path for the μ-ethylidenes, in contrast to the di-μ-methylene complexes where C+C+C coupling predominates. The divinyl complex [{(C₅Me₅)Rh}₂(μ-CH₂)(μ-CHMe) (CH=CH₂)₂] also underwent internal C+C coupling on reaction with AgBF₄ in MeCN to give a mixture of the allyl and methylallyl cations [(C₅Me₅)Rh(η³-CH₂CHCHR)(MeCN)]⁺(10, R=H; 11, R=Me).     

The new enneanuclear nickel carbonyl anion [Ni9(CO)16] and its relationships with the [Ni12(CO)21] and [Ni6Rh3(CO)17] clusters

The reaction of [N(PPh₃)₂]₂[Ni₆(CO)₁₂] with Cu(PPh₃)_xCl (x=1, 2), as well as the degradation of [N(PPh₃)₂]₂[H₂Ni₁₂(CO)₂₁] with PPh₃, affords the new and unstable dark orange–brown [N(PPh₃)₂]₂[Ni₉(CO)₁₆].THF salt in low yields. This salt has been characterized by a CCD X-ray diffraction determination, along with IR spectroscopy and elemental analysis. The close-packed two-layer metal core geometry of the [Ni₉(CO)₁₆]²⁻ dianion is directly related to that of the bimetallic [Ni₆Rh₃(CO)₁₇]³⁻ trianion and may be envisioned to be formally derived from the hcp three-layer geometry of [Ni₁₂(CO)₂₁]⁴⁻ by the substitution of one of the two outer [Ni₃(CO)₃(μ−CO)₃]²⁻ layers with a face-bridging carbonyl group.     

Heterobimetallic chloro bridgedcomplexes of (η:η−C10H16)-ruthenium(IV) with palladium(II), platinum(II), rhodium(III), iridium(III), copper(I) and rhodium(I)

Metathesis of [(η³:η³−C₁₀H₁₆)Ru(Cl) (μ−Cl)]₂ (1) with [R₃P) (Cl)M(μ-Cl)]₂ (M = Pd, Pt), [Me₂NCH₂C₆H₄Pd(μ-Cl)]₂ and [(OC)₂Rh(μ-Cl)]₂ affords the heterobimetallic chloro bridged complexes (η³:η³-C₁₀H₁₆) (Cl)Ru(μ-Cl)₂M(PR₃)(Cl) (M = Pd, Pt), (η³:η³-C₁₀H₁₆) (Cl)Ru(μ-Cl)₂PdC₆H₄CH₂NMe₂ and (η³:η³-C₁₀H₁₆) (Cl)Ru(μ-Cl)₂Rh(CO)₂, respectively. Complex 1 reacts with [Cp^*M(Cl) (μ-Cl)]₂ (M = Rh, Ir), [p-cymene Ru(Cl) (μ-Cl]₂ and [(Cy₃P)Cu(μ-Cl)]₂ to give an equilibrium of the heterobimetallic complexes and of educts. The structures of (η³:η³-C₁₀H₁₆)Ru(μ-Cl)₂Pd(PR₃) (Cl) (R = Et, Bu) and of one diastereoisomer of (η³:η³-C₁₀H₁₆)Ru(μ-Cl)₂IrCp^*(Cl) were determined by X-ray diffraction.     

Crown ether mediated cadmium halide dimers and polymers

The reactions of cadmium halides with the 15-membered macrocyclic crown ethers, 15-crown-5 and benzo-15-crown-5, have been carried out and six new complexes have been isolated and structurally characterized. Metal to ligand stoichiometries of 1:1, 2:1, 3:1 and 3:2 have been observed with a variety of different formulations. Examples of charge separated ion pairs ([(NH₄)(benzo-15-crown-5)₂]₂[Cd₂I₆]), halogen bridged monomers, dimers or polymers ([Cd(15-crown-5)(OHMe)(μ-Br)CdBr₃], [Cd(15-crown-5)(μ-Br)₂CdBr(μ-Br)]₂(isolated from the same reaction mixture) and [(CdCl₂)₂CdCl₂(15-crown-5)]_n), and hydrogen bonded finite chains or polymers ([(Cd(OH₂)₂(15-crown-5)][CdI₃(OH₂)]₂·2(15-crown-5)·2CH₃CN and [CdI₂(OH₂)₂(THF)]·benzo-15-crown-5) have been isolated. Three different types of 15-crown-5 coordination modes have been observed in these complexes. In-cavity coordination resulting in pentagonal bipyramidal geometries about Cd²⁺ was observed in [(CdCl₂)₂CdCl₂(15-crown-5)]_n, [Cd(15-crown-5)(OHMe)(μ-Br)CdBr₃], and [Cd(OH₂)₂(15-crown-5)][CdI₃(OH₂)]₂·2(15-crown-5)·2CH₃CN, [Cd(15-crown-5)(μ-Br)₂CdBr(μ-Br)]₂ displays out-of-cavity coordination with one etheric donor distorted into an axial position of a distorted pentagonal bipyramid. The third coordination mode is secondary sphere coordination via hydrogen bonding which is observed for [Cd(OH₂)₂(15-crown-5)][CdI₃(OH₂)]₂·2(15-crown-5)·2CH₃CN. The good fit of Cd²⁺ within the cavity of 15-crown-5 results in shorter bonding contacts and a more narrow distribution in Cd---O values (2.273(7)-2.344(6) Å) than observed for cadmium halide complexes of 18-crown-6 (Cd---O = 2.69(1)–2.81(1) Å).     

Ionic iridium-gold and rhodium-gold perfluorobenzenethiolato binuclear complexes: syntheses and solution behavior

By reacting [(C₅Me₅)M(SR_F)₂] (forM = Ir, Rf = C₆F₅ (1a) or C₆F₄H-p (1b); for M = Rh, Rf = C₆F₅ (2a) or C₆F₄H-p (2a)) in toluene with Na[AuCl₄], ionic binuclear compounds with the general formula [(C₅Me₅)M(μ-SR_F)₂AuCl₂]Cl for M = Ir, R = C₆F₅ (3a) or C₆F₄H-p (3a); for M = Rh, R_F = C₆F₅ (4a) or C₆F₄H-p (4b) can be obtained, together with small amounts of [(C₅Me₅)₂Rh₂(μ-SR_F)(μ-Cl)₂]Cl (R_F = C₆F₅ (5a) or C₆F₄H-p (5b)) as by-products when 2a and 2b were used.     

Mechanistic details for metathetical exchange between XCO (X = O and RN) and the tin(II) dimer, {Sn[N(SiMe3)2] (μ-OBu)}2

Metathetical exchange between carbon dioxide and the tin(II) dimer, {Sn[N(SiMe₃)₂](μ-OBu¹)}₂ (3) has been observed to cleanly produce the two new heteroleptic tin(II) dimers, Sn[N(SiMe₃)₂](μ-OBu^t)₂Sn(OSiMe₃) (6) and [Sn(OSiMe₃)](μ-OBu^t)]₂ (7]). In addition, reaction of 3 with I equiv, of tert-butylisocyanate (8), at 25°C, quantitatively provides 6, and with 2 equiv., quantitatively provides 7. Likewise 6 reacts with 1 equiv, of 8 to quantitatively provide 7. The mechanism for these latter processes has been investigated by low temperature ¹H NMR spectroscopy which reveals that metathetical exchange does not involve the tri-coordinate tin(II) centers of the dimeric structures, but rather, it occurs, in each case, via the transient monomeric tin(II) species, Sn[N(SiMe₃)₂](μ-OBu^t) (4), that undergoes metathesis to produce, initially the open dimer intermediate, Sn(OCNBu^t)(OSiMe₃)(μ-OBu^t)Sn(OBu^t) (OSiMe₃) (12), that is observed at −10°C. Subsequent redistribution reactions then generate the final products that are observed. Together, these mechanistic details provide additional support for the ‘monomeric tin(II)’ hypothesis proposed earlier for metathetical exchange between XCO and Sn[N (SiMe₃)₂]₂ (1).     

Manganese(II) complexes of an acyclic phenol-based dinucleating ligand with four methoxyethyl chelating arms: synthesis, structure, magnetism and electrochemistry

Dinuclear manganese(II) complexes [Mn₂(bomp)(PhCO₂)₂]BPh₄ (1), [Mn₂(bomp)(MeCO₂)₂]BPh₄ (2), and [Mn₂(bomp)(PhCO₂)₂]PF₆ (3) were synthesized with a dinucleating ligand 2,6-bis[bis(2-methoxyethyl)aminomethyl]-4-methylphenol [H(bomp)]. Dinuclear zinc complex [Zn₂(bomp)(PhCO₂)₂]PF₆ (4) was also synthesized for the purpose of comparison. X-ray analysis revealed that the complex 1·CHCl₃ contains two manganese ions bridged by the phenolic oxygen and two benzoate groups, forming a μ-phenoxo-bis(μ-benzoato)dimanganese(II) core. Magnetic susceptibility measurements of 1–3 over the temperature range 1.8–300 K indicated antiferromagnetic interaction (J=−4 to −6 cm⁻¹). Cyclic voltammograms of 3 showed a quasi-reversible oxidation process at +0.9 V versus a saturated sodium chloride calomel reference electrode, assigned to Mn^IIMn^II/Mn^IIMn^III.     

Cyclic tetranuclear half-sandwich ruthenium(II) complexes with 4,7-phenanthroline and hydroxo bridges: crystal structure, solution behaviour and binding to nucleosides

The reaction between [(η⁶-p-cymene)Ru(H₂O)₃]X₂ and 4,7-phenanthroline (phen) leads to the formation of the rectangular tetranuclear complexes [(η⁶-p-cymene)₄Ru₄(μ-4,7-phen-N⁴,N⁷)₂(μ-OH)₄]X₄ (X = NO₃, 1a; SO₃CF₃, 1b) which have been structurally characterised by X-ray crystallography. ¹H NMR spectroscopic studies suggest the presence of a partially dissociated dinuclear species of type [(η⁶-p-cymene)₂Ru₂(μ-4,7-phen-N⁴,N⁷)(solv)₄]⁴⁺ in equilibrium with the tetranuclear cyclic species found in the solid state. The temperature effect for this equilibrium was studied by variable temperature ¹H NMR experiments in D₂O and MeOD. The results reveal that the proportion of the tetranuclear species increases with the polarity of the solvent which favour stacking interactions between the phenanthroline moieties. In addition, the reactivity of the tetranuclear species towards the nucleosides guanosine (Guo), cytidine (Cyt), 2′-deoxythymidine (Thy) and 2′-deoxyadenosine (dAdo) has been monitored by ¹H NMR as a potential model for the interaction of the 1 species with the probable DNA target. The results reveal that the 1 systems are able to bind the nucleobases endocyclic nitrogen atoms of Guo Cyt, and dAdo.     

Synthesis and characterization of polypyridineruthenium(II) complexes containing a linear ambidentate ligand, NCO or NCS, and reaction of isocyanato complexes under acidic conditions

Isocyanato and isothiocyanatopolypyridineruthenium complexes, [Ru(NCX)Y(bpy)(py)₂]ⁿ⁺ (bpy=2,2′-bipyridine, PY=pyridine; X=O, Y=NO₂ for n=0, and Y=py for n=1; X=S, Y=NO₂ for n=0, Y=NO for n=2, and Y=py for n=1), were synthesized by the reaction of polypyridineruthenium complexes with potassium cyanate or sodium thiocyanate salt. Isocyanatoruthenium(II) complexes, [Ru(NCO)(NO₂)(bpy)(py)₂] and [Ru(NCO)(bpy)(py)₃]⁺, react under acidic conditions to form the corresponding ammineruthenium complexes, [Ru(NO)(NH₃)(bpy)(py)₂]³⁺. The molecular structures of [Ru(NCO)(bpy)(py)₃]ClO₄, [Ru(NCS)(NO)(bpy)(py)₂](PF₆)₂ and [Ru(NO)(NH₃)(bpy)(py)₂](PF₆)₃ were determined by X-ray crystallography.     

Chemistry of vinylidene complexes XI. Synthesis of trinuclear MnFePt complexes by means of consecutive assembling out of mono- and dimetal vinylidene precursors

The dimetal μ-vinylidene complexes Cp(CO)₂MnPt(μ-C = CHPh)L₂ (L = tert.-phosphine or -phosphite), which have been obtained by coupling of the mononuclear complex Cp(CO)₂Mn=C=CHPh and unsaturated PtL₂ unit, add smoothly the Fe(CO)₄ moiety to produce trimetal MnFePt compounds. The μ₃-vinylidene cluster CpMnFePt(μ₃-C=CHPh)(CO)₆(PPh₃) was prepared in quantitative yields from the reactions of Cp(CO)₂MnPt(μ-C=CHPh)(PPh₃)L (L = PPh₃ or CO) with Fe₂(CO)₉ in benzene at 20 °C. The phosphite-substituted complexes Cp(CO)₂Mnpt(μ-C=CHPh)L₂ (L = P(OEt)₃ or P(OPrⁱ)₃) react under analogous conditions with Fe₂(CO)₉ to give mixtures (2:3) of the penta- and hexacarbonyl clusters, CpMnFePt(μ₃-C = CHPh)(CO)₅L₂ and CpMnFePt(μ₃-C = CHPh)(CO)₆L, respectively. The similar reaction of the dimetal complex Cp(CO)₂MnPt(μ-C = CHPh)(dppm), in which the Pt atom is chelated by dppm = Ph₂PCH₂PPhPin2 ligand, gives only a 15% yield of the analogous trimetal μ₃-vinylidene hexacarbonyl product CpMnFePt(μ₃-C = CHPh)(CO)(dppm), but the major product (40%) is the tetranuclear μ₄-vinylidene cluster (dppm)PtFe₃(μ₄-C = CHPh)(CO)₉. The IR and ¹H, ¹³C and ³¹P NMR data for the new complexes are reported and discussed.     

Reactions between ruthenium cluster carbonyls and 1,4-diphenylbuta-1,3-diyne

The complexes RuC(CCPh)=CPhC(CCPh)=CPh(CO)₃(NMe₃) (3), Ru₂μ-C(CCPh)=CPhC(CCPh)=CPh(CO)₆ (1), Ru₂μ-[C(CCPh)=CPh]₂CO(CO)₆ (2), Ru₃(μ₃-PhC₂CCPh)(μ-CO)(CO)₉ (4) and Ru₄(μ₄-PhC₂CCPh)(CO)₁₂ (5) have been isolated from reactions between PhC₂C₂Ph and Ru₃(CO)₁₂ or RU₃(CO)₁₀(NCMe)₂. The molecular structures of complexes 1, 2, 3 and 5 have been determined from single-crystal X-ray studies. All complexes have precedents in similar products obtained from reactions involving mono-ynes; in the present cases, each alkyne fragment retains a phenylethynyl (PhCC---) group as a non-coordinated substituent.     

Structural studies on products of reduction of a nitro-Ni1C3N2-metallocene

The reduction of 12-nitro-(1,1,2,8,9,9-hexamethyl-3,7,10-14-tetraaza-4,6-oxa-5-hydra-tetradeca-2,7,10-12-tetrene)nickel(II) (Nioyl-NO₂), with Zn(s) and NaOH or HCl solution or utilizing Pd-H₂ under most conditions produces an intensely purplee complex ion ε_(max) at 552 nm which is not the expected amine. This product was found to be a conjugated dimer ion with two Nioyls multiply bonded to a single nitrogen atom. It was shown that the initial reduction produces the amine or amine hydrochloride which oxidizes rapidly in the presence of traces of O₂ under low acidity conditions to the dimer. Under high acidity conditions the amine salt is isolated. The X-ray crystal structures of three complexes are described: [(Nioyl)₂NH](ClO₄)₂·2.5CCl₄, [(Nioyl-NH₃)₂H]ZnCl₄Cl·3H₂O, [Nioyl-NH₃]H_0.5(ClO₄)_1.5·2CH₃CN·2H₂O and structural differences are discussed. The 2e⁻ reduction of [(Nioyl)₂N]⁺ with dithionite ion reversibly gives the yellow [(Nioyl)₂NH]⁺ which is extremely sensitive to air oxidation. A postulated reaction sequence is presented and discussed to explain the formation of the highly stable conjugated dimeric purple product.     

Ferrocenyl-derived face-capping ligands: syntheses and molecular structures of [(FcTt)Cu]4 and [FcTt]2M (M = Fe, Co, Ni; FcTt = ferrocenyltris((methylthio)methyl)borate)

The synthesis and characterization of a ferrocenyl-derived tridentate ligand, ferrocenyltris((methylthio)methyl)borate (FcTtP⁻), and its representative metal complexes, [(FcTt)Cu]₄ and [FcTt]₂M (M = Fe, Co and Ni), are reported. The M = Fe complex exhibits spin-crossover behavior with a μ_eff = 1.19 μ_B at 25°C. The low-spin Co(II) derivative (1.88 μ_B) exhibits a characteristic axial electron paramagnetic resonance (EPR) spectrum, g_av = 2.13, A = 53 G and A_¦ = 43 G. The [FcTt]₂M complexes display reversible two-electron redox processes assigned to ligand-centered events about 200 mV negative of the ferrocene-ferrocenium couple. [(FcTt)Cu]₄ and [FcTt]₂Ni have been characterized by X-ray diffraction. X-ray data for [(FcTt)Cu]₄: monoclinic space group C2/c, with a = 24.3747(3) Å, b = 20.0857(2) Å, c = 17.2747(4) Å, β = 95.843(1)°, V = 8413.5(3) ų, and Z = 4; [FcTt]₂Ni: monoclinic space group C2/c, with a = 12.6220(3) Å, b = 11.6002(3) Å, c = 25.0125(7) Å, β = 94.067(1)°, V = 3653.1(2) ų, and Z = 4.     

Comparison in halide binding ability between the unsaturated clusters [Pd3(μ-dppm)3(CO)] and [PdPtCo(μ-dppm)2(CO)3(CNBu)] (dppm = Ph2PCH2PPh2)

The trinuclear clusters [Pd₃(μ-dppm)₃(CO)]²⁺ and [PtPdCo(μ-dppm)₂(CO)₃(CN^tBu)]⁺ exhibit a large and a small cavity, respectively, formed by the phenyl rings of the bridging diphosphine ligands. Their binding constants (K₁₁) with halide ions (X⁻) were obtained by UV-Vis spectroscopy. The binding ability varies as I⁻ > Br⁻ > Cl⁻, and [Pd₃(μ-dppm)₃(CO)]²⁺ > [ptPdCo(μ-dppm)₂-(CO)₃(CN^tBu)]⁺. The MO diagram for the related cluster [Pd₂Co(μ-dppm)₂(CO)₄]⁺ has been addressed theoretically in order to predict the nature of the lowest energy electronic bands. For this class of compounds, the lowest energy bands are assigned to charge transfers from the Co center to the Pd₂ centers.     

Synthesis, structure, and heterogeneous catalytic activity of tungsten chalcogenide cubane cluster containing alkaline earth metal complex

A new compound containing a cubane tungsten chalcogenide cluster [W₄(μ₃-Te)₄(CN)₁₂]⁶⁻ and Ca²⁺ complex units has been prepared by the reaction of aqueous solution of K₆[W₄(μ₃-Te)₄(CN)₁₂] · 5H₂O with the solution of a Ca(NO₃)₂ and phen(1,10-phenanthroline) (1:2 molar ratio) in a solvent mixture of H₂O/EtOH. The structure of [{Ca(phen)₂(H₂O)}{Ca(phen)(H₂O)₄}{Ca(phen)₂(H₂O)₃}][W₄Te₄(CN)₁₂] · 5H₂O 1 has been determined by X-ray crystallography. Compound 1 contains [{Ca(phen)(H₂O)₄}{Ca(phen)₂(H₂O)₃}][W₄(μ₃- Te)₄(CN)₁₂] units bridged by {Ca(phen)₂(H₂O)}²⁺ units to form an one-dimensional zigzag chain structure. Interestingly, compound 1 showed a heterogeneous catalytic activity in the transesterification of a range of esters with methanol under the mild conditions. Moreover, it can be reused without any loss of activity through 10 runs with ester.     

Slippage of η-allenyl/propargyl to an η structure and tautomerization of η-propargyl to η-allenyl in ligand addition and substitution reactions of platinum(II) complexes

Reactions of [(PPh₃)₂Pt(η³-CH₂CCPh)]OTf with each of PMe₃, CO and Br⁻ result in the addition of these species to the metal and a change in hapticity of the η³-CH₂CCPh to η¹-CH₂CCPh or η¹-C(Ph)=C=CH₂. Thus, PMe₃ affords [(PMe₃)₃Pt(η¹-C(Ph)=C=CH₂)]⁺, CO gives both [trans-(PPh₃)₂Pt(CO)(η¹-CH₂CCPh)]⁺ and [trans-(PPh₃)₂Pt(CO)(η¹-C(Ph)=C=CH₂)]⁺, and LiBr yields cis-(PPh₃)₂PtBr(η¹-CH₂CCPh), which undergoes isomerization to trans-(PPh₃)₂PtBr(η¹-CH₂CCPh). Substitution reactions of cis- and trans-(PPh₃)₂PtBr(η¹-CH₂CCPh) each lead to tautomerization of η¹-CH₂CCPh to η¹-C(Ph)=C=CH₂, with trans-(PPh₃)₂PtBr(η¹-CH₂CCPh) affording [(PMe₃)₃Pt(η¹-C(Ph)=C=CH₂)]⁺ at ambient temperature and the slower reacting cis isomer giving [trans-(PPh₃)(PMe₃)₂Pt(η¹-C(Ph)=C=CH₂)]⁺ at 54 °C . All new complexes were characterized by a combination of elemental analysis, FAB mas spectrometry and IR and NMR (¹H, ¹³C{¹H} and ³¹P{¹H}) spectroscopy. The structure of [(PMe₃)₃Pt(η¹-C(Ph)=C=CH₂)]BPh₄·0.5MeOH was determined by single-crystal X-ray diffraction analysis.     

The synthesis and reactions of A-ring aromatic steroid complexes of manganese tricarbonyl

Treatment of the A-ring aromatic steroids estrone 3-methyl ether and β-estradiol 3, 17-dimethyl ether with Mn(CO)₅⁺BF₄⁻ in CH₂Cl₂ yields the corresponding [(steroid)Mn(CO)₃]BF₄ salts 1 and 2 as mixtures of and β isomers. The X-ray structure of [(estrone 3-methyl ether)Mn(CO)₃]BF₄ · CH₂Cl₂ (1) having the Mn(CO)₃ moiety on the side of the steroid is reported: space group P2₁ with a=10.3958(9), b=10.9020(6), c=12.6848(9) Å, β=111.857(6)°, Z=2, V=1334.3(2) ų, _calc=.481 cm⁻³, R=0.0508, and wR=0.0635. The molecule has the traditional ‘piano stool’ structure with a planar arene ring and linear Mn---C---O linkages. The nucleophiles NaBH₄ and LiCH₂C(O)CMe₃ add to [(β-estradiol 3,17-dimethyl ether)Mn(CO)₃]BF₄ (2) in high yield to give the corresponding - and β-cyclohexadienyl manganese tricarbonyl complexes (3). The nucleophiles add meta to the arene -OMe substituent and exo to the metal. The and β isomers of 3 were separated by fractional crystallization and the X-ray structure of the β isomer with an exo-CH₂C(O)CMe₃ substituent is reported (complex 4): space group P2₁2₁2₁ with a=7.5154(8), b=15.160(2), c=25.230(3) Å, Z=4, V=2874.4(5) ų, _calc=1.244 g cm⁻³, R=0.0529 and wR2=0.1176. The molecule 4 has a planar set of dienyl carbon atoms with the saturated C(1) carbon being 0.592 Å out of the plane away from the metal. The results suggest that the manganese-mediated functionalization of aromatic steroids is a viable synthetic procedure with a range of nucleophiles of varying strengths.