Screening and characterization of alkaline protease produced by a pink pigmented facultative methylotrophic (PPFM) strain,MSF 46

Among the various bacterial isolates, the strain MSF 46 isolated from thorn forest soil samples, Tamil Nadu, India, was screened and characterized for its proteolytic activity. While the 16S rRNA sequencing and biochemical characterization revealed that the strain closely resembles Methylobacterium sp., methylotrophy of the strain was confirmed by the sequence homology of mxaF gene with other relative Methylobacterium sp. The alkaline protease was purified to homogeneity using DEAE cellulose ion exchange chromatography, with a 5.2-fold increase in specific activity and 34% recovery. The apparent molecular weight of the enzyme was determined as 40 kDa by SDS–PAGE study. The pH and temperature optima were 9.0 and 50 °C respectively with maximum protease activity of 1164 U/ml. Protease of MSF 46 was active in a broad pH range 7.0–11.0 with a maximum at pH 8.5 and exhibited thermostability at 50 °C. The enzyme activity was inhibited by PMSF but showed stability with Tween 20, Triton X-100 and hydrogen peroxide. Nearly 30% reduction in enzyme activity was observed in the presence of EDTA and DTT. The enzyme was effective in hydrolyzing gelatin, skimmed milk and blood clots and exhibited the potency for dehairing of goat skin and removing blood stain from cotton fabric. Significant morphological changes were observed under scanning electron microscope between cells grown in normal and casein amended medium. This first detailed report on the production of alkaline protease by a PPFM strain appears promising toward development of protocols for mass production, study of the molecular mechanism and other applications.     

A novel surfactant-stable alkaline serine-protease from a newly isolated Bacillus mojavensis A21. Purification and characterization

An extracellular bleach stable protease producing strain was isolated from marine water sample and identified as Bacillus mojavensis A21 on the basis of the 16S rRNA gene sequencing and biochemical properties. The A21 alkaline protease was purified from the culture supernatant to homogeneity using acetone precipitation, Sephadex G-75 gel filtration and CM-Sepharose ion exchange chromatography, with a 6.43-fold increase in specific activity and 16.56% recovery. The molecular weight of the purified enzyme was estimated to be 20 kDa by SDS-PAGE and gel filtration. The enzyme was highly active over a wide range of pH from 7.0 to 13.0, with an optimum at pH 8.5. The relative activities at pH 11.0 and 12.0 were about 80 and 71.7% of that obtained at pH 8.5. The enzyme was extremely stable in the pH range of 7.0–12.0. It exhibited maximal activity at 60 °C. The thermostability of the enzyme was significantly increased by the addition of CaCl₂. The activity of the enzyme was totally lost in the presence of PMSF, suggesting that the purified enzyme is a serine protease.The N-terminal amino acid sequence of the first 20 amino acids of the purified protease was DINGGGATLPQKLYQTSGVL. B. mojavensis A21 protease showed low homology with bacterial peptidases, suggesting that the enzyme is a new protease.The alkaline protease showed high stability towards anionic (0.1% SDS) and non-ionic (1 and 5% Tween 80 and 1% Triton X-100) surfactants. In addition, the enzyme was relatively stable towards oxidizing agents, retaining more than 79 and 70% of its initial activity after 1 h incubation in the presence of 1% H₂O₂ and 0.1% sodium perborate, respectively. The enzyme showed excellent stability with a wide range of commercial solid and liquid detergents at 30 and 40 °C. Considering its promising properties, B. mojavensis A21 may find potential application in laundry detergents.     

A novel organic solvent-stable alkaline protease from organic solvent–tolerant Bacillus licheniformis YP1A

An organic solvent-stable alkaline protease producing bacterium was isolated from the crude oil contaminant soil and identified as Bacillus licheniformis. The enzyme retained more than 95% of its initial activity after pre-incubation at 40 °C for 1 h in the presence of 50% (v/v) organic solvents such as DMSO, DMF, and cyclohexane. The protease was active in a broad range of pH from 8.0 to 12.0 with the optimum pH 9.5. The optimum temperature for this protease activity was 60 °C, and the enzyme remained active after incubation at 50–60 °C for 1 h. This organic solvent-stable protease could be used as a biocatalyst for organic solvent-based enzymatic synthesis.     

Production and characterization of a thermostable endo-type β-xylanase produced by a newly-isolated Streptomyces thermocarboxydus subspecies MW8 strain from Jeju Island

A xylanase-producing, Gram-positive, aerobic, and spore-forming bacterium was isolated from a soil sample collected from Jeju Island and was classified as a novel subspecies of Streptomyces thermocarboxydus on the basis of 16S rRNA gene sequence similarity, the results of DNA–DNA hybridization analysis, and phenotypic characteristics. The novel strain was named as S. thermocarboxydus subsp. MW8 (=KCTC29013 = DSM52054). This strain produced extracellular xylanase. Xylanase from the strain was purified to homogeneity and had an apparent molecular weight of 52 kDa. The NH₂-terminal sequence (Ala-Glu-Ile-Arg-Leu) was distinct from those of previously reported xylanases. The purified xylanase produced xylobiose as the end-product of birchwood xylan hydrolysis. The K_m and V_max values of the purified xylanase on birchwood xylan were 1.71 mg/ml and 357.14 U/mg, respectively. The optimum pH and temperature for the enzyme were found to be 7.0 and 50 °C, respectively, and the enzyme exhibited significant heat stability. In addition, the enzyme was active over broad pH ranges: 84% of the maximum activity at pH 5.0, 84–88% at pH 6.0, 88% at pH 8.0, and 75–81% (pH 9.0). These enzymatic properties may be very useful for use in bio-industrial applications.     

Purification and characterization of a serine protease extracellularly produced by Aspergillus fumigatus in a shrimp and crab shell powder medium

A fungus with protease and chitinase activities was isolated from the soil. It has been identified as Aspergillus fumigatus Fresenius TKU003. A. fumigatus TKU003 produced proteases and chitinases when it was grown in a medium containing shrimp and crab shell powder (SCSP) of marine waste. An extracellular protease was purified from the culture supernatant of A. fumigatus TKU003. The molecular weight of TKU003 protease was 124 kDa by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE). The pI for TKU003 protease was 8.3. The optimum pH, optimum temperature, pH stability, and thermal stability of TKU003 protease was pH 8, 40 °C, 6–10, and 50 °C, respectively. The activity of the enzyme was strongly inhibited by PMSF. TKU003 serine protease, same as most other serine proteases of A. fumigatus, belongs to protease with alkaline pI. The unique characteristics of TKU003 protease is its high molecular weight.     

Degradation of chitin and production of bioactive materials by bioconversion of squid pens

Serratia marcescens TKU011, a protease- and chitosanase-producing bacterium, the optimized condition for protease and chitosanase production was found after the media were heated at 121 °C for 120 min and the culture was shaken at 25 °C for 5 days in 100 mL of medium containing 1% squid pen powder (SPP) (w/v), 0.1% K₂HPO₄, and 0.05% MgSO₄. An extracellular metalloprotease with novel properties of solvent stable, and alkaline was purified from the culture supernatant of S. marcescens TKU011 with squid pen wastes as the sole carbon/nitrogen source. The enzyme was a monomeric protease with a molecular mass of 48–50 kDa by SDS–PAGE and gel filtration chromatography. The optimum pH, optimum temperature, pH stability, and thermal stability of TKU011 protease were 8, 50 °C, pH 5–11, and <40 °C, respectively. Besides protease and chitosanase, with this method, deproteinization of squid pen for β-chitin, the production of peptide and reducing sugar may be useful for biological applications.     

Calcium dependent,alkaline detergent-stable trypsin from the viscera of Goby (Zosterisessor ophiocephalus): Purification and characterization

An alkaline calcium dependent trypsin from the viscera of Goby (Zosterisessor ophiocephalus) was purified to homogeneity with a 16-fold increase in specific activity and 20% recovery. The purified trypsin appeared as a single band on sodium dodecyl sulphate-polyacrylamide gel (SDS-PAGE) and native-PAGE. The enzyme had an estimated molecular weight of 23.2 kDa.The optimum pH was 9.0, and the enzyme was extremely stable in various pH buffers between pH 7.0 and 11.0. The optimum temperature for enzyme activity was 60 °C, and the activity and stability of trypsin was highly dependent on the presence of calcium ion. At 60 °C, Ca²⁺ (5 mM) stimulated the protease activity by 220%. The trypsin kinetic constants, K_m and k_cat, were 0.312 mM and 2.03 s^?1.The enzyme showed high stability towards non-ionic surfactants and oxidizing agent. In addition, the enzyme showed excellent stability and compatibility with some commercial solid and liquid detergents.     

Screening and optimization of protease production from a halotolerant Bacillus licheniformis isolated from saltern sediments

Protease producing halotolerant bacterium was isolated from saltern pond sediment (Tuticorin) and identified as Bacillus licheniformis (TD4) by 16S rRNA gene sequencing. Protease production was enhanced by optimizing the culture conditions. The nutritional factors such as carbon and nitrogen sources, NaCl and also physical parameters like incubation time, pH, agitation, inoculum size were optimized for the maximum yield of protease. Studies on the effect of different carbon and nitrogen sources revealed that xylose and urea enhances the enzyme production. Thus, with selected C–N sources along with 1 M NaCl the maximum protease production (141.46 U/mg) was obtained in the period of 24 h incubation at pH 8 under 250 rpm compared to the initial enzyme production (89.87 U/mg).     

Purification and characterization of solvent stable,alkaline protease from Bacillus firmus CAS 7 by microbial conversion of marine wastes and molecular mechanism underlying solvent stability

A marine bacterium Bacillus firmus CAS 7 produced protease in the medium supplemented with 3:1 shrimp and crab shell powder at 55 °C and was purified with the specific activity of 473.4 U/mg. The purified protease was highly stable up to 70 °C, pH 11.0 and 30% NaCl. The protease purified was quite stable in the presence of anionic and non-ionic surfactants and organic solvents. The molecular dynamics simulation confirmed that the competition between organic solvent and water for the enzyme surface was comparatively higher in water–miscible organic solvent which is responsible for organic solvent stability. The purified protease from B. firmus CAS 7 could be greatly useful to develop industrial processes performed under harsh conditions or with denaturants and organic solvents. The protease production by microbial conversion of marine wastes suggested its potential utilization to generate high value-added products.     

Hydrolytic and chromatographic studies on the PEGylation of dextranase from Penicillium sp.

Dextranases catalyze the hydrolysis of the α-l,6-glucosidic bond of the polysaccharide dextran. Dextranases have been isolated from bacteria, yeast and fungi. Purified dextranase enzyme from Penicillium sp. was PEGylated (polyethylene glycol modification) with mPEG (5000 Da) and showed an increase in the dextranase protein molecular weight as estimated by Superose 12 (23 ml) column and this increment in the molecular weight is directly proportional to mPEG (5000 Da) concentration until a complete dextranase enzyme PEGylation (disappearance of dextranase peak). The residual activity of partially PEGylated dextranase (mPEG 5000 of 5.8 mg/ml) was 33.8% and for the completely PEGylated dextranase (mPEG 5000 of 29 mg/ml) it was 25.75%. Dextranase PEGylated with mPEG (30,000 Da) showed a little PEGylation at mPEG concentration of 5.8 mg/ml but at a concentration of 29 mg/ml several PEGylated peaks were produced with a difference in dextranase activity toward dextran T500, retardation in the activity with the increasing in the molecular weight was clearly appeared with Sephadex G75 but for Sephadex G200 a little retardation than Sephadex G75 has been appeared.     

Purification and characterization of two thermostable protease fractions from Bacillus megaterium

Protease enzyme from Bacillus megaterium was successively purified by ammonium sulfate precipitation, ion exchange chromatography on DEAE-cellulose and gel filtration chromatography on Sephadex G-200. The purification steps of protease resulted in the production of two protease fractions namely protease P1 and P2 with specific activities of 561.27 and 317.23 U mg^?1 of protein, respectively. The molecular weights of B. megaterium P1 and P2 were 28 and 25 KDa, respectively. The purified fractions P1 and P2 were rich in aspartic acid and serine. Relatively higher amounts of alanine, leucine, glycine, valine, thereonine valine and glutamic acid were also present. The maximum protease activities for both enzyme fractions were attained at 50 °C, pH 7.5, 1% of gelatine concentration and 0.5 enzyme concentrations. P1 and P2 fractions were more stable over pH 7.0–8.5 and able to prolong their thermal stability up to 80 °C. The effect of different inhibitors on the protease activity of both enzyme fractions was also studied. The enzyme was found to be serine active as it had been affected by lower concentrations of phenylmethylsulfonyl fluoride (PMSF). Complete dehairing of the enzyme-treated skin was achieved in 12 h, at room temperature.     

BSF1 fibrinolytic enzyme from a marine bacterium Bacillus subtilis A26: Purification,biochemical and molecular characterization

A novel fibrinolytic enzyme, subtilisin BSF1, from a newly isolated Bacillus subtilis A26 was purified, characterized and the gene was isolated and sequenced. The subtilisin BSF1 was purified to homogeneity by five-step procedure with a 4.97-fold increase in specific activity and 6.28% recovery. The molecular weight of the purified enzyme was estimated to be 28 kDa by SDS-PAGE and gel filtration. The purified enzyme exhibited high fibrinolytic activity on fibrin agar plates.Interestingly, the enzyme was highly active over a wide range of pH from 7.0 to 12.0, with an optimum at pH 9.0. The relative activities at pH 10.0 and 11.0 were 97.8% and 85.2% of that at pH 9.0. The optimum temperature for enzyme activity was 60 °C. The activity of subtilisin BSF1 was totally lost in the presence of PMSF, suggesting that the purified enzyme is a serine protease. The N-terminal amino acid sequence of the first 11 amino acids (aa) of the purified fibrinolytic enzyme was AQSVPYGISQI.The bsf1 gene encoding the subtilisin BSF1 was isolated and its DNA sequence was determined. The bsf1 gene consisted of 1146 bp encoding a pre-pro-protein of 381 amino acids organized into a signal peptide (29 aa), a pro-peptide (77 aa) and a mature domain (275 aa). The deduced amino acids sequence of the mature enzyme (BSF1) differs from those of nattokinase from B. subtilis natto and subtilisin DFE from Bacillus amyloliquefaciens DC-4 by 5 and 39 amino acids, respectively.     

Purification and characterization of thermostable organic solvent-stable protease from Aeromonas veronii PG01

A mesophilic bacterium, Aeromonas veronii PG01, isolated from industrial wastes produced an extracellular thermostable organic solvent tolerant protease. The optimum condition for cell growth and protease production was pH 7.0 and 30 °C. The protease produced was purified 53-fold to homogeneity with overall yield of 32%, through ammonium sulphate precipitation, ion-exchange and gel permeation chromatography (GPC). The molecular weight, as determined by GPC–HPLC, was found to be about 67 kDa. SDS-PAGE revealed that the enzyme consisted of two subunits, with molecular weight of 33 kDa. The protease was active in broad range of pH from 6.0 to 10.0 with optimum activity at pH 7.5. The optimum temperature for this protease was 60 °C. The enzyme remained active after incubation at 50–60 °C for 1 h. This enzyme was stable and active after incubation with benzene and it was activated 1.3- and 1.5-fold by n-hexane and n-dodecane, respectively. This protease was inhibited completely by the classic metalloprotease inhibitor 1,10-phenanthroline and partially by the metal chelator EDTA but not by the serine protease inhibitor PMSF. The PG01 protease was found to contain 1.901 mol of zinc per mole of enzyme upon analysis by Inductively coupled plasma-optical emission spectroscopy. The thermostable and solvent tolerance property make it an attractive and promising biocatalyst for enzyme mediated synthesis.     

Biochemical characterization,cloning and molecular modeling of a detergent and organic solvent-stable family 11 xylanase from the newly isolated Aspergillus niger US368 strain

New β-1,4-d-xylan xylanohydrolase (XAn11) belonging to the xylanase 11 family was purified to homogeneity from a newly soil-isolated Aspergillus niger US368 strain. The pure xylanase is a glycosylated monomer having a molecular mass of about 26 kDa. The N-terminal sequence of the purified enzyme was determined and compared to some Aspergillus xylanases N-terminal ones. The gene encoding the XAn11 was cloned and sequenced.The maximal xylanase activity was obtained at pH 5.0 and 55 °C. The XAn11 was found to be stable in a wide range of pH (3–9) and in presence of some detergents and organic solvents. A specific activity of about 805.6 U/mg or 334 U/mg was measured using birchwood xylan or oatspelt xylan as substrate, respectively. A structural explanation of the difference between experimental and theoretical molecular mass as well as the stability of the enzyme against acidic pH was proposed by molecular modeling.     

The stability and thermodynamic parameters of a very thermostable and calcium-independent α-amylase from a newly isolated bacterium,Anoxybacillus beppuensis TSSC-1

Anoxybacillus beppuensis TSSC-1 (GenBank Number, EU710556), a thermophilic bacterium isolated from a hot spring reservoir, was found to optimally secrete a monomeric α-amylase at 55 °C and pH 7. The enzyme was purified to homogeneity by a single-step purification on phenyl sepharose 6FF, achieving a 58% yield, 10,000 U/mg specific activity and 19.5 fold purification. The molecular weight, K_m and V_max were 43 kD, 0.5 mg ml^?1 and 3571.42 μmol ml^?1 m^?1, respectively. The enzymatic catalysis of soluble starch was optimum at 80 °C and pH 7. The thermodynamic parameters, K_d, t_1/2, ΔH*, ΔS*, E and ΔG*, were consistent. The very compact structure of the enzyme and the transitional enzyme–substrate complex resisted denaturation at extreme temperatures and alkaline pH. The K_d and t_1/2 measurements were consistent with the high thermostability and pH tolerance observed. The structural stability of the enzyme was also reflected by the values of ΔH*, ΔS*, E and ΔG*. While the enzyme did not exhibit metal ion dependency, it was resistant to chemical denaturation. The broad thermo- and pH-tolerance of this enzyme suggests potential commercial opportunities.     

Characterization of thermo- and detergent stable serine protease from isolated Bacillus circulans and evaluation of eco-friendly applications

Alkaline protease from Bacillus circulans has been purified and characterized in detail for its robustness and its eco-friendly application potential at leather processing and detergent industries. The molecular weight of the purified enzyme was estimated to be 39.5 kDa on SDS-PAGE. It exhibited optimum activity at broad temperature range and maximum at 70 °C under alkaline pH environment, in the presence of surfactants and oxidizing agents. It has revealed stain removal property and dehairing activity for animal hide without chemical assistance and without hydrolyzing fibrous proteins. This enzyme showed application potential in leather processing industry for production of better quality product in eco-friendly process. In addition, the stability (pH, temperature and surfactants) and hydrolysis of blood stain data also revealed its application in detergent industries.     

Gene cloning,overexpression and characterization of a novel organic solvent tolerant and thermostable lipase from Galactomyces geotrichum Y05

Although the lipase of Geotrichum candidum has been extensively reported, little attention has been focused on molecular genetic and biochemical characterizations of Galactomyces geotrichum lipases. A lipase gene from G. geotrichum Y05 was cloned from both genomic DNA and cDNA sources. Nucleotide sequencing revealed that the ggl gene has an ORF of 1692 bp without any introns, encoding a protein of 563 amino acid residues, including a potential signal sequence of 19 amino acid residues. The amino acid sequence of this lipase showed 86% identity to lipase of Trichosporon fermentans WU-C12. The mature lipase gene was subcloned into pPIC9K vector, and overexpressed in methylotrophic Pichia pastoris GS115. Active lipase was accumulated to the level of 100.0 U/ml (0.4 mg/ml) in the shake-flask culture, 10.4-fold higher than the activity of the original strain (9.6 U/ml). This yield dramatically exceeds that previously reported with 23–50 U/ml, 0.06 mg/ml and 0.2 mg/ml. The purified lipase exhibited several properties of significant industrial importance, such as pH and temperature stability, wide organic solvent tolerance and broad hydrolysis on vegetable oils. Such a combination of properties makes it a promising candidate for its application in non-aqueous biocatalysis, such as biodiesel production, selective hydrolysis or esterification for enrichment of PUFAs and oil-contaminated biodegradation, which have been drawn considerable attention currently.     

A novel thermostable GH5_7 β-mannanase from Bacillus pumilus GBSW19 and its application in manno-oligosaccharides (MOS) production

A novel thermostable mannanase from a newly isolated Bacillus pumilus GBSW19 has been identified, expressed, purified and characterized. The enzyme shows a structure comprising a 28 amino acid signal peptide, a glycoside hydrolase family 5 (GH5) catalytic domain and no carbohydrate-binding module. The recombinant mannanase has molecular weight of 45 kDa with an optimal pH around 6.5 and is stable in the range from pH 5–11. Meanwhile, the optimal temperature is around 65 °C, and it retains 50% relative activity at 60 °C for 12 h. In addition, the purified enzyme can be activated by several ions and organic solvents and is resistant to detergents. Bpman5 can efficiently convert locus bean gum to mainly M2, M3 and M5, and hydrolyze manno-oligosaccharides with a minimum DP of 3. Further exploration of the optimum condition using HPLC to prepare oligosaccharides from locust bean gum was obtained as 10 mg/ml locust bean gum incubated with 10 U/mg enzyme at 50 °C for 24 h. By using this enzyme, locust bean gum can be utilized to generate high value-added oligosaccharides with a DP of 2–6.     

Homologous expression,purification and characterization of a novel high-alkaline and thermal stable lipase from Burkholderia cepacia ATCC 25416

The lipase secreted by Burkholderia cepacia ATCC 25416 was particularly attractive in detergent and leather industry due to its specific characteristics of high alkaline and thermal stability. The lipase gene (lipA), lipase chaperone gene (lipB), and native promoter upstream of lipA were cloned. The lipA was composed of 1095 bp, corresponding to 364 amino acid residues. The lipB located immediately downstream of lipA was composed of 1035 bp, corresponding to 344 amino acid residues. The lipase operon was inserted into broad host vector pBBRMCS1 and electroporated into original strain. The homologous expression of recombinant strain showed a significant increase in the lipase activity. LipA was purified by three-step procedure of ammonium sulfate precipitation, phenyl-sepharose FF and DEAE-sepharose FF. SDS-PAGE showed the molecular mass of the lipase was 33 kDa. The enzyme optimal temperature and pH were 60 °C and 11.0, respectively. The enzyme was stable at 30–70 °C. After incubated in 70 °C for 1 h, enzyme remained 72% of its maximal activity. The enzyme exhibited a good stability at pH 9.0–11.5. The lipase preferentially hydrolyzed medium-chain fatty acid esters. The enzyme was strongly activated by Mg²⁺, Ca²⁺, Cu²⁺, Zn²⁺, Co²⁺, and apparently inhibited by PMSF, EDTA and also DTT with SDS. The enzyme was compatible with various ionic and non-ionic surfactants as well as oxidant H₂O₂. The enzyme had good stability in the low- and non-polar solvents.     

Isolation,purification and biochemical characterization of dipeptidyl peptidase-III from germinated Vigna radiata seeds

Genome analysis of plants indicated majority of putative protease genes that need characterization at enzymatic and molecular level. Proteases execute important role in seed development but knowledge of dipeptidylpeptidases in seeds is limited. A dipeptidylpeptidase-III that cleaves Arg-Arg from Arg-Arg-4mβNA was purified from germinated Mung bean seeds. Screening of cereals and legumes for DPP-III revealed highest activity in Phaseolus vulgaris and Vigna radiata (variety P.9531) seeds germinated for 48 h. Homogenate (10%) was acid precipitated upto pH 4.2 and then subjected to 0–55% ammonium sulphate precipitation followed by successive chromatographies on cation exchanger, gel filtration and anion exchanger. Enzyme purity was confirmed by native polyacrylamide gel electrophoresis and in situ gel assays. DPP-III is a heterodimer of ～60 kDa with two subunits of 32.8 kDa and 27 kDa on SDS-PAGE. DPP-III worked optimally at pH 8.0 and at 37 °C with pH stability between 7.5 to 9.5. Arg-Arg-4mβNA was preferred substrate and none of endopeptidase and monopeptidase substrates were hydrolysed. Inhibitors studies revealed it as thiol protease with involvement of metals at active site. The enzyme might be involved in plant's development by generating/deactivating bioactive peptides. Further studies on functional characterization and molecular structure are in progress in our laboratory.