Graft copolymerization of acrylamide on chitosan-co-chitin and its application for immobilization of Aspergillus sp. RL2Ct cutinase

The synthesis of chitosan (Chs) and chitin (Chi) copolymer and grafting of acrylamide (AAm) onto the synthesized copolymer have been carried out by chemical methods. The grafted copolymer was characterized by FTIR, SEM and XRD. The extracellular cutinase of Aspergillus sp. RL2Ct (E.C. 3.1.1.3) was purified to 4.46 fold with 16.1% yield using acetone precipitation and DEAE sepharose ion exchange chromatography. It was immobilized by adsorption on the grafted copolymer. The immobilized enzyme was found to be more stable then the free enzyme and has a good binding efficiency (78.8%) with the grafted copolymer. The kinetic parameters K_M and V_max for free and immobilized cutinase were found to be 0.55 mM and 1410 μmol min⁻¹ mg⁻¹ protein, 2.99 mM and 996 μmol min⁻¹ mg⁻¹ protein, respectively. The immobilized cutinase was recycled 64 times without considerable loss of activity. The matrix (Chs-co-Chi-g-poly(AAm)) prepared and cutinase immobilized on the matrix have potential applications in enzyme immobilization and organic synthesis respectively.     

Crucial factors affecting the nitrile hydratase production of Mesorhizobium sp. F28

Mesorhizobium sp. F28 contains cobalt-NHase, which effectively converts acrylonitrile into acrylamide. When urea was added to the culture medium, the NHase activity was 62.3 U ml^?1 (R2A–R2A/urea) after 22.5 h of cultivation, which was similar to that in the medium without addition (R2A–R2A, 70.0 U ml^?1). The relative activity of the purified NHase was 100%, 92%, 94%, and 92% in the medium containing, respectively, 0 mM, 2 mM, 5 mM, and 10 mM of urea. Urea had no significant effect on the purified NHase activity of Mesorhizobium sp. F28. This research did not observe the NHase production by Mesorhizobium sp. F28 when acrylonitrile was supplemented in the culture medium except that cobalt ions existed. The highest enzyme activity was 328.5 U ml^?1 as cobalt ions were added in the pre-culture and culture medium after 22.5 h of cultivation (R2A/Co-R2A/Co); compared to media without cobalt ions (R2A–R2A, 22.5 h, 70.5 U ml^?1) this is an almost five-fold enhancement. It can be concluded that culture media containing cobalt ions was beneficial for the formation of active NHase of Mesorhizobium sp. F28.     

Immobilization of urease on vapour phase stain etched porous silicon

Porous silicon layers fabricated by the reaction-induced vapor phase stain etch method were coated with 5% polyethylenimine. Urease from Canavalia brasiliensis beans was immobilized on this support through covalent linking with 2.5% glutaraldehyde. The pH and temperature profile of the immobilized and free urease exhibited higher activity at pH 6.5 and 37 °C. After being stored for 30 days at 4 °C, the immobilized enzyme had 75% of the initial activity. The maximum apparent Michaelis constant for free urease (K_m) was 94.33 mM whereas for immobilized urease was 53.04 mM. The maximum reaction velocity (V_max) for free urease was 3.51 mmol/min and for immobilized urease was 1.57 mmol/min.     

Application of chitosan beads immobilized Rhodococcus sp. NCIM 2891 cholesterol oxidase for cholestenone production

The cell-bound cholesterol oxidase from the Rhodococcus sp. NCIM 2891 was purified three fold by diethylaminoethyl–sepharose chromatography. The estimated molecular mass (SDS-PAGE) and K_m of the enzyme were ∼55.0 kDa and 151 μM, respectively. The purified cholesterol oxidase was immobilized on chitosan beads by glutaraldehyde cross-linking reaction and immobilization was confirmed by Fourier transform infrared spectroscopy, scanning electron microscopy and energy dispersive X-ray analysis. The optimum temperature (45 °C, 5 min) for activity of the enzyme was increased by 5 °C after immobilization. Both the free and immobilized cholesterol oxidases were found to be stable in many organic solvents except for acetone. Fe²⁺ and Pb²⁺ at 0.1 mM of each acted as inhibitors, while Ag⁺, Ca²⁺, Ni²⁺ and Zn²⁺ activated the enzyme at similar concentration. The biotransformation of cholesterol (3.75 mM) with the cholesterol oxidase immobilized beads (3.50 U) leads to ∼88% millimolar yield of cholestenone in a reaction time of 9 h at 25 °C. The immobilized enzyme retains ∼67% activity even after 12 successive batches of operation. The biotransformation method thus, shows a great promise for the production of pharmaceutically important cholestenone.     

Identification of a marine NADPH-dependent aldehyde reductase for chemoselective reduction of aldehydes

A putative aldehyde reductase gene from Oceanospirillum sp. MED92 was overexpressed in Escherichia coli. The recombinant protein (OsAR) was characterized as a monomeric NADPH-dependent aldehyde reductase. The kinetic parameters K_m and k_cat of OsAR were 0.89 ± 0.08 mM and 11.07 ± 0.99 s⁻¹ for benzaldehyde, 0.04 ± 0.01 mM and 6.05 ± 1.56 s⁻¹ for NADPH, respectively. This enzyme exhibited high activity toward a variety of aromatic and aliphatic aldehydes, but no activity toward ketones. As such, it catalyzed the chemoselective reduction of aldehydes in the presence of ketones, as demonstrated by the reduction of 4-acetylbenzaldehyde or the mixture of hexanal and 2-nonanone, showing the application potential of this marine enzyme in such selective reduction of synthetic importance.     

Optimization of immobilization conditions of Thermomyces lanuginosus lipase on styrene–divinylbenzene copolymer using response surface methodology

Microbial lipase from Thermomyces lanuginosus (formerly Humicola lanuginosa) was immobilized by covalent binding on a novel microporous styrene–divinylbenzene polyglutaraldehyde copolymer (STY–DVB–PGA). The response surface methodology (RSM) was used to optimize the conditions for the maximum activity and to understand the significance and interaction of the factors affecting the specific activity of immobilized lipase. The central composite design was employed to evaluate the effects of enzyme concentration (4–16%, v/v), pH (6.0–8.0), buffer concentration (20–100 mM) and immobilization time (8–40 h) on the specific activity. The results indicated that enzyme concentration, pH and buffer concentration were the significant factors on the specific activity of immobilized lipase and quadratic polynomial equation was obtained for specific activity. The predicted specific activity was 8.78 μmol p-NP/mg enzyme min under the optimal conditions and the subsequent verification experiment with the specific activity of 8.41 μmol p-NP/mg enzyme min confirmed the validity of the predicted model. The lipase loading capacity was obtained as 5.71 mg/g support at the optimum conditions. Operational stability was determined with immobilized lipase and it indicated that a small enzyme deactivation (12%) occurred after being used repeatedly for 10 consecutive batches with each of 24 h. The effect of methanol and tert-butanol on the specific activity of immobilized lipase was investigated. The immobilized lipase was almost stable in tert-butanol (92%) whereas it lost most of its activity in methanol (80%) after 15 min incubation.     

Laccase mediator system for activation of agarose gel: Application for immobilization of proteins

Cross-linked Sepharose beads were treated with laccase–TEMPO system for oxidation of the primary alcohol groups on the sugar moieties. Optimal activation conditions using Trametes versicolor laccase were at pH 5 and 22 °C, giving an aldehyde content of 55 μmol g⁻¹ Sepharose with 28 units g⁻¹ of laccase and 12.5 mM TEMPO. The activated Sepharose was used for immobilization of trypsin as model protein. Highest degree of immobilization was obtained at pH 10.5 but the activity yield was only 31% of that loaded on the gel. The yield of gel bound trypsin activity was increased to 76% (corresponding to about 43 U g⁻¹ Sepharose) when the immobilization was performed in the presence of trypsin inhibitor, benzamidine. The immobilization yields were comparable to that obtained on the matrix activated using sodium periodate (containing 72 μmol aldehyde per g Sepharose). Recycling and storage of the immobilized trypsin preparations showed high stability of the enzyme bound to laccase–TEMPO activated gel.     

Efficient production of S-(+)-2-chlorophenylglycine by immobilized penicillin G acylase in a recirculating packed bed reactor

(S)-(+)-2-Chlorophenylglycine 1 is an important intermediate in the synthesis of Clopidogrel. A recirculating packed bed reactor (RPBR) was constructed for efficient production of (S)-1 by kinetic resolution of racemic N-phenylacetyl-2- chlorophenylglycine 2 using immobilized penicillin G acylase (PGA). The immobilized PGA exhibited maximum activity at 50 °C and pH 8.0 with (R,S)-2 as substrate. The kinetic constants (K_m and v_max) of immobilized PGA were calculated to be 20.61 mM and 83.2 mM/min/g, respectively. The substrate displayed inhibitory effect on immobilized PGA with inhibition constant of 221.23 mM. The immobilized PGA showed a strict enantiospecificity for substrate at different temperature, pH and substrate concentration examined. The performance and productivity of RPBR were evaluated by several critical parameters, including immobilized PGA load, substrate feeding rate, height to diameter ratio and so on. The kinetic resolution process shows higher initial reaction rate and conversion by recycling 100 mL of substrate solution (80 mM) through RPBRs packed with 6.0 g immobilized PGA with a feeding rate of 1.5 mL/min while the H/D ratio was 4.0. The immobilized PGA-catalyzed kinetic resolution of (R,S)-2 was successfully operated in the RPBR for 60 batches, with an average productivity of 1.2 g/L/h for (S)-1 in high optical purity (>97% enantiomeric excess) in semi-continuous operation. The residual (R)-2 can be easily racemized and then used as substrate.     

Immobilization of α-galactosidase on galactose-containing polymeric beads

Industrial application of α-galactosidase requires efficient methods to immobilize the enzyme, yielding a biocatalyst with high activity and stability compared to free enzyme. An α-galactosidase from tomato fruit was immobilized on galactose-containing polymeric beads. The immobilized enzyme exhibited an activity of 0.62 U/g of support and activity yield of 46%. The optimum pH and temperature for the activity of both free and immobilized enzymes were found as pH 4.0 and 37 °C, respectively. Immobilized α-galactosidase was more stable than free enzyme in the range of pH 4.0–6.0 and more than 85% of the initial activity was recovered. The decrease in reaction rate of the immobilized enzyme at temperatures above 37 °C was much slower than that of the free counterpart. The immobilized enzyme shows 53% activity at 60 °C while free enzyme decreases 33% at the same temperature. The immobilized enzyme retained 50% of its initial activity after 17 cycles of reuse at 37 °C. Under same storage conditions, the free enzyme lost about 71% of its initial activity over a period of 7 months, whereas the immobilized enzyme lost about only 47% of its initial activity over the same period. Operational stability of the immobilized enzyme was also studied and the operational half-life (t_1/2 was determined as 6.72 h for p-nitrophenyl α-d-galactopyranoside (PNPG) as substrate. The kinetic parameters were determined by using PNPG as substrate. The K_m and V_max values were measured as 1.07 mM and 0.01 U/mg for free enzyme and 0.89 mM and 0.1 U/mg for immobilized enzyme, respectively. The synthesis of the galactose-containing polymeric beads and the enzyme immobilization procedure are very simple and also easy to carry out.     

Hen egg white as a feeder protein for lipase immobilization

Enzyme stabilization via immobilization is one of the preferred processes as it provides the advantages of recovery and reusability. In this study, Thermomyces lanuginosus lipase has been immobilized through crosslinking using 2% glutaraldehyde and hen egg white, as an approach towards CLEA preparation. The immobilization efficiency and the properties of the immobilized enzyme in terms of stability to pH, temperature, and denaturants was studied and compared with the free enzyme. Immobilization efficiency of 56% was achieved with hen egg white. The immobilized enzyme displayed a shift in optimum pH towards the acidic side with an optimum at pH 4.0 whereas the pH optimum for free enzyme was at pH 6.0. The immobilized enzyme was stable at higher temperature retaining about 83% of its maximum activity as compared to the free enzyme retaining only 41% activity at 70 °C. The denaturation of lipase in free form was rapid with a half-life of 2 h at 60 °C and 58 min at 70 °C as compared to 12 h at 60 °C and 2 h at 70 °C for the immobilized enzyme. The effect of denaturants, urea and guanidine hydrochloride on the free and immobilized enzyme was studied and the immobilized enzyme was found to be more stable towards denaturants retaining 74% activity in 8 M urea and 98% in 6 M GndHCl as compared to 42% and 33% respectively in the case of free enzyme. The apparent K_m (2.08 mM) and apparent V_max (0.95 μmol/min) of immobilized enzyme was lower as compared to free enzyme; K_m (8.0 mM) and V_max (2.857 μmol/min). The immobilized enzyme was reused several times for the hydrolysis of olive oil.     

Immobilization of fungal (Trametes versicolor) laccase onto Amberlite IR-120 H beads: Optimization and characterization

Laccase from Trametes versicolor was immobilized on Amberlite IR-120 H beads. Maximum immobilization obtained was 78.7% at pH = 4.5 and temperature T = 45 °C. Kinetic parameters, K_m and V_max values, were determined respectively as 0.051 mM and 2.77 × 10^?2 mM/s for free and 4.70 mM and 5.27 × 10^?3 mM/s for immobilized laccase. The Amberlite–laccase system showed a 30% residual activity after 7 cycles. On the other hand, the loss of activity for free laccase after 7 days of storage at 4 °C was 18.5% in comparison to Amberlite–laccase system with a loss of 1.4%, during the same period. Improved operational, thermal and storage stabilities of the immobilized laccase were obtained compared to the free counterpart. Therefore, the use of low-cost matrices, like Amberlite for enzyme immobilization represents a promising product for enzymatic industrial applications.     

The addition of Co2+ enhances the catalytic efficiency and thermostability of recombinant glucose isomerase from Thermobifida fusca

Glucose isomerase is an important industrial enzyme that catalyzes the reversible isomerization of glucose to fructose. In this study, the effect of cobalt ions (Co²⁺) on the catalytic efficiency and thermostability of recombinant glucose isomerase from Thermobifida fusca was analyzed. The activity of glucose isomerase from engineered Escherichia coli supplemented with 1 mM Co²⁺ (C-GI) reached 41 U/ml, 2.1-fold higher than enzyme prepared from E. coli without additive (GI). The purified C-GI also exhibited an increased specific activity (23.8 U/mg compared to 12.1 U/mg for GI) and a greater thermostability (half-life of 17 h at 75 °C, 11.3-fold higher than GI (1.5 h)). The optimal temperature for C-GI shifted from 80 °C to 85 °C and demonstrated higher activity over pH 7.0–9.0. The k_cat/K_m value of C-GI (89.3 M^?1 s^?1) for the isomerization of glucose to fructose was nearly 1.75-fold higher than that of GI. In addition, the engineered cells were immobilized with the method of flocculation-cross linking. The immobilized cells supplemented with 1 mM Co²⁺ (C-IGI) had a better operational performance than cells without additives (IGI); at the end of 6 cycles, the conversion rate of C-IGI was still 43.1%, meeting the conversion rate requirement.     

Polyethylene terephthalate membrane as a support for covalent immobilization of uricase and its application in serum urate determination

A method is described for covalent immobilization of uricase onto polyethylene terephthalate (PET) membrane with a conjugation yield of 4.44 μg/cm² and 66.6% retention of initial activity of free enzyme. The enzyme exhibited an increase in optimum pH from pH 7.0 to 8.5 and K_m for uric acid from 0.075 mM to 0.13 mM but slight decrease in temp. for maximum activity from 37 °C to 35 °C after immobilization. A colorimetric method for determination of serum uric acid was developed using immobilized uricase, which is based on measurement of H₂O₂ by a color reaction consisting of 3,5-dichlorobenzene sulphonic acid (DHBS), 4-aminoantipyrine and peroxidase as chromogenic system. Minimum detection limit of the method was 0.05 mM. Analytical recovery of added uric acid (5 mg/dl and 10 mg/dl) was 94.3% and 89.8%, respectively. Within and between batch coefficient of variation (CV) were <3.2% and <4.3%, respectively. A good correlation (r = 0.98) was found between uric acid values by standard enzymic colorimetric method and the present method. The immobilized uricase was reused 100 times during the span of 60 days without any considerable loss of activity, when stored in reaction buffer at 4 °C. The support chosen for the present study was biocompatible, antimicrobial, inert, impact resistant, light weight and had good shelf life.     

Immobilization and characterization of human carbonic anhydrase I on amine functionalized magnetic nanoparticles

In this study, we synthesized magnetic nanoparticles (MNPs) by co-precipitation method. After that, silica coating with tetraethyl orthosilicate (TEOS) (SMNPs), amine functionalization of silica coated MNPs (ASMNPs) by using 3-aminopropyltriethoxysilane (APTES) were performed, respectively. After activation with glutaraldehyde (GA) of ASMNPs, human carbonic anhydrase (hCA I) was immobilized on ASMNPs. The characterization of nanoparticles was performed by transmission electron microscopy (TEM), fourier transform infrared spectroscopy (FT-IR), X-ray powder diffraction (XRD) and vibrating sample magnetometer (VSM). The immobilization conditions such as GA concentration, activation time of support with GA, enzyme amount, enzyme immobilization time were optimized. In addition of that, optimum conditions for activity, kinetic parameters (K_m, V_max, k_cat, kcat/K_m), thermal stability, storage stability and reusability of immobilized enzyme were determined.The immobilized enzyme activity was optimum at pH 8.0 and 25 °C. The K_m value of the immobilized enzyme (1.02 mM) was higher than the free hCA I (0.48 mM). After 40 days incubation at 4 °C and 25 °C, the immobilized hCA I sustained 89% and 85% of its activity, respectively. Also, it sustained 61% of its initial activity after 13 cycles. Such results revealed good potential of immobilized enzyme for various applications.     

Immobilization of phytase on epoxy-activated Sepabead EC-EP for the hydrolysis of soymilk phytate

In this work, an active phytase concentrated extract from soybean sprout was immobilized on a polymethacrylate-based polymer Sepabead EC-EP which is activated with epoxy groups. The immobilized enzyme exhibited an activity of 0.1 U/g of carrier and activity yield of 64.7%. The optimum temperature and pH for the activity of both free and immobilized enzymes were found as 60 °C and pH 5.0, respectively. The immobilized enzyme was more stable than free enzyme in the range of pH 3.0–8.0 and more than 70% of the original activity was recovered. Both the enzymes completely retained nearly about 84% of their original activity at 65 °C. The K_m and V_max values were measured as 5 mM and 0.63 U/mg for free enzyme and 12.5 mM and 0.71 U/mg for immobilized enzyme, respectively. Free and immobilized soybean sprout phytase enzymes were also used in the biodegradation of soymilk phytate. The immobilized enzyme hydrolysed 92.5% of soymilk phytate in 7 h at 60 °C, as compared with 98% hydrolysis observed for the native enzyme over the same period of time. The immobilization procedure on Sepabead EC-EP is very cheap and also easy to carry out, and the features of the immobilized enzyme are very attractive that the potential for practical application is considerable.     

Oxidation of phenyl compounds using strongly stable immobilized-stabilized laccase from Trametes versicolor

The hydrolysis of phenolic compounds using an immobilized and highly active and stable derivative of laccase from Trametes versicolor is presented. The enzyme was immobilized on aldehyde supports. For this, the enzyme was enriched in amino groups by chemical modification of its carboxyl groups. The aminated enzyme was immobilized with a high recovered activity (over 60%). Aldehyde derivatives were more stable than soluble or aminated-soluble enzyme and the reference derivatives after incubation in different inactivating conditions (high temperatures, different pH values or presence of organic cosolvents). The most stable derivative was obtained immobilizing the chemically aminated enzyme at pH 10 on aldehyde supports with a stabilization factor approximately 280 fold after incubation at pH 7 and 55 °C. In addition, it was possible to prepare immobilized derivatives with a maximal enzyme loading of 60 mg g^?1 of support. This derivative could be reused for 10 reaction cycles with negligible lost of activity.     

Immobilization of catalase onto Eupergit C and its characterization

Bovine liver catalase was covalently immobilized onto Eupergit C. Optimum conditions of immobilization: pH, buffer concentration, temperature, coupling time and initial catalase amount per gram of carrier were determined as 7.5, 1.0 M, 25 °C, 24 h and 4.0 mg/g, respectively. V_max and K_m were determined as 1.4(±0.2) × 10⁵ U/mg protein and 28.6 ± 3.6 mM, respectively, for free catalase, and as 3.7(±0.4) × 10³ U/mg protein and 95.9 ± 0.6 mM, respectively, for immobilized catalase. The thermal stability of the immobilized catalase in terms of half-life time (29.1 h) was comparably higher than that of the free catalase (9.0 h) at 40 °C. Comparison of storage stabilities showed that the free catalase completely lost its activity at the end of 11 days both at room temperature and 5 °C. However, immobilized catalase retained 68% of its initial activity when stored at room temperature and 79% of its initial activity when stored at 5 °C at the end of 28 days. The highest reuse number of immobilized catalase was 22 cycles of batch operation when 40 mg of immobilized catalase loaded into the reactor retaining about 50% of its original activity. In the plug flow type reactor, the longest operation time was found as 82 min at a substrate flow rate of 2.3 mL/min when the remaining activity of 40 mg immobilized catalase was about 50% of its original activity. The resulting immobilized catalase onto Eupergit C has good reusability, thermal stability and long-term storage stability.     

Arthrobacter sp. lipase immobilization on magnetic sol–gel composite supports for enantioselectivity improvement

A bacterial lipase from Arthrobacter sp. (ABL: IIIM Jammu, India strain, MTCC No. 5125) has been immobilized on non-magnetic (Type A) and magnetic (Type B) supports derived from copolymerization of 3-aminopropyltriethoxysilane and tetraethylorthosilicate. Immobilized ABL presented 21–34 mg/g protein binding providing 30–75 units/g activity in Type A non-magnetic composites and 24–45 mg/g protein binding providing 35–90 units/g activity with Type B supports containing magnetic particles. Immobilized ABL preparations have shown enhanced stability at pH 5–9 and temperature up to 70 °C whereas free ABL is unstable under these conditions. Improved hydrolytic conversion as well as enantioselectivity were observed with acyl fluoxetine intermediate (ethyl 3-hydroxy-3-phenylpropanoate alkyl acylates) and chiral auxiliaryacyl 1-phenyl ethanol using immobilized ABL derivatives (ee ～99%; 3–4-fold increase in E-values) as compared to ABL enzyme/cells (ee 93–98%). Introduction of magnetic particles in these supports has led to easier separation process with high product recovery yields.     

Comparative biochemical characterization of soluble and chitosan immobilized β-galactosidase from Kluyveromyces lactis NRRL Y1564

An investigation was conducted on the production of β-galactosidase (β-gal) by different strains of Kluyveromyces, using lactose as a carbon source. The maximum enzymatic activity of 3.8 ± 0.2 U/mL was achieved by using Kluyveromyces lactis strain NRRL Y1564 after 28 h of fermentation at 180 rpm and 30 °C. β-gal was then immobilized onto chitosan and characterized based on its optimal operation pH and temperature, its thermal stability and its kinetic parameters (K_m and V_max) using o-nitrophenyl β-d-galactopyranoside as substrate. The optimal pH for soluble β-gal activity was found to be 6.5 while the optimal pH for immobilized β-gal activity was found to be 7.0, while the optimal operating temperatures were 50 °C and 37 °C, respectively. At 50 °C, the immobilized enzyme showed an increased thermal stability, being 8 times more stable than the soluble enzyme. The immobilized enzyme was reused for 10 cycles, showing stability since it retained more than 70% of its initial activity. The immobilized enzyme retained 100% of its initial activity when it was stored at 4 °C and pH 7.0 for 93 days. The soluble β-gal lost 9.4% of its initial activity when it was stored at the same conditions.