Increased production of FAEEs for biodiesel with lipase enhanced Saccharomyces cerevisiae

In this study, we expressed lipase 2 from Candida sp. 99-125 in Saccharomyces cerevisiae, and tried direct biodiesel production. Driven by 3-phosphoglycerate kinase promoter, Lip2 showed high expression level in cytoplasm. SDS-PAGE analysis confirmed the successful lipase expression with a 40 kDa molecular weight. The enzyme assay indicated that lipase 2 had a specific activity of 12.12 μmol/min/mg toward p-nitrophenyl palmitate. Gas chromatography showed that the main fatty acids of S. cerevisiae lipids were palmitoleic acid (31.79%) and oleic acid (29.84%). By three-step addition of 4% ethanol to culture broth, the yield of fatty acid ethyl esters by recombinant S. cerevisiae reached 11.4 mg/g dry cell weight. This work proposed a novel pathway for S. cerevisiae that could be applied for producing biodiesel directly.     

Optimization of immobilization conditions of Thermomyces lanuginosus lipase on styrene–divinylbenzene copolymer using response surface methodology

Microbial lipase from Thermomyces lanuginosus (formerly Humicola lanuginosa) was immobilized by covalent binding on a novel microporous styrene–divinylbenzene polyglutaraldehyde copolymer (STY–DVB–PGA). The response surface methodology (RSM) was used to optimize the conditions for the maximum activity and to understand the significance and interaction of the factors affecting the specific activity of immobilized lipase. The central composite design was employed to evaluate the effects of enzyme concentration (4–16%, v/v), pH (6.0–8.0), buffer concentration (20–100 mM) and immobilization time (8–40 h) on the specific activity. The results indicated that enzyme concentration, pH and buffer concentration were the significant factors on the specific activity of immobilized lipase and quadratic polynomial equation was obtained for specific activity. The predicted specific activity was 8.78 μmol p-NP/mg enzyme min under the optimal conditions and the subsequent verification experiment with the specific activity of 8.41 μmol p-NP/mg enzyme min confirmed the validity of the predicted model. The lipase loading capacity was obtained as 5.71 mg/g support at the optimum conditions. Operational stability was determined with immobilized lipase and it indicated that a small enzyme deactivation (12%) occurred after being used repeatedly for 10 consecutive batches with each of 24 h. The effect of methanol and tert-butanol on the specific activity of immobilized lipase was investigated. The immobilized lipase was almost stable in tert-butanol (92%) whereas it lost most of its activity in methanol (80%) after 15 min incubation.     

Enzymatic synthesis of fatty acid methyl esters from lard with immobilized Candida sp. 99-125

In this paper, immobilized lipase catalyzed biodiesel production from lard was studied. Using Candida sp. 99-125, the effect of temperature, water content, enzyme amount, solvent and three-step methanolysis were investigated. The optimal conditions for processing 1 g of lard were: 0.2 g immobilized lipase, 8 ml n-hexane as solvent, 20% water based on the fat weight, temperature 40 °C, and three-step addition of methanol. As a result, the fatty acid methyl esters (FAMEs) yield was 87.4%. The lipase was proved to be stable when used repeatedly for 180 h.     

Crosslinking of enzyme coaggregate with polyethyleneimine: A simple and promising method for preparing stable biocatalyst of Serratia marcescens lipase

Crosslinking of enzyme aggregates is a promising method for enzyme immobilization. In this work, crosslinked enzyme coaggregates of Serratia marcescens lipase with polyethyleneimine (CLECAs-SML-PEI) were prepared using polyethyleneimine (PEI) as coprecipitant and glutaraldehyde as crosslinking reagent. The crude lipase solution at a low protein concentration (0.1 mg/ml), with PEI at a mass ratio of 3:1 (PEI/protein, w/w), was found to be most adequate for the coprecipitation of SML. After crosslinking of the coaggregate of SML-PEI with 0.2% (w/v) glutaraldehyde under ambient temperature, over 70% of the total lipase activity was recovered. Compared with the free SML, the optimum temperature of the CLECAs-SML-PEI was enhanced from 50 °C to 60 °C and its thermal stability was also significantly improved. CLECAs-SML-PEI showed excellent operational stability in repeated use in aqueous–toluene biphasic system for asymmetric hydrolysis of trans-3-(4′-methoxyphenyl)glycidic acid methyl ester (MPGM), without significant inactivation after 10 rounds of repeated use.     

Improving the activity and stability of Yarrowia lipolytica lipase Lip2 by immobilization on polyethyleneimine-coated polyurethane foam

In this study, polyurethane foam (PUF) was used for immobilization of Yarrowia lipolytica lipase Lip2 via polyethyleneimine (PEI) coating and glutaraldehyde (GA) coupling. The activity of immobilized lipases was found to depend upon the size of the PEI polymers and the way of GA treatment, with best results obtained for covalent-bind enzyme on glutaraldehyde activated PEI-PUF (MW 70,000 Da), which was 1.7 time greater activity compared to the same enzyme immobilized without PEI and GA. Kinetic analysis shows the hydrolytic activity of both free and immobilized lipases on triolein substrate can be described by Michaelis–Menten model. The K_m for the immobilized and free lipases on PEI-coated PUF was 58.9 and 9.73 mM, respectively. The V_max values of free and immobilized enzymes on PEI-coated PUF were calculated as 102 and 48.6 U/mg enzyme, respectively. Thermal stability for the immobilization preparations was enhanced compared with that for free preparations. At 50 °C, the free enzyme lost most of its initial activity after a 30 min of heat treatment, while the immobilized enzymes showed significant resistance to thermal inactivation (retaining about 70% of its initial activity). Finally, the immobilized lipase was used for the production of lauryl laurate in hexane medium. Lipase immobilization on the PEI support exhibited a significantly improved operational stability in esterification system. After re-use in 30 successive batches, a high ester yield (88%) was maintained. These results indicate that PEI, a polymeric bed, could not only bridge support and immobilized enzymes but also create a favorable micro-environment for lipase. This study provides a simple, efficient protocol for the immobilization of Y. lipolytica lipase Lip2 using PUF as a cheap and effective material.     

One-step purification of YLLIP2 isoforms from Candida sp. 99–125 by polyethyleneimine modified poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate) monolith

The extracellular lipase Yarrowia lipolytica (YLLIP2) crude extract was efficiently separated and purified from Candida sp. 99–125 by one-step ion-exchange chromatography on polyethyleneimine (PEI) functionalized monolithic columns. The preparative conditions for the functionalization of monoliths were optimized, including PEI molecular mass, PEI concentration, modification time and temperature. The monolithic skeleton was prepared in situ by polymerization of glycidyl methacrylate (GMA) and ethylene glycol dimethacrylate (EGDMA) with a volume ratio of 8:2. Heptane was used as the porogen. PEI 30 kDa with the concentration of 10% (v/v) was applied for the modification of the monolith at 55 °C for 12 h. Lipase (EC.3.1.1.3) from Candida sp. 99–125 was separated to four isoforms (isoform A, isoform B, isoform C and isoform D). As analyzed on non-denaturing PAGE and MALDI-TOF–MS, the four isoforms are homogenous and have the same molecular mass of approximate 38 kDa. The monoliths can afford direct crude lipase loading without increasing too much back pressure, which explores the great potential of the application of monoliths for one-single step fast separation and purification of complicated proteins.     

Combination of two lipases more efficiently catalyzes methanolysis of soybean oil for biodiesel production in aqueous medium

A combination of two lipases was employed to catalyze methanolysis of soybean oil in aqueous medium for biodiesel production. The two lipase genes were cloned from fungal strains Rhizomucor miehei and Penicillium cyclopium, and each expressed successfully in Pichia pastoris. Activities of the 1,3-specific lipase from R. miehei (termed RML) and the non-specific mono- and diacylglycerol lipase from P. cyclopium (termed MDL) were 550 U and 1545 U per ml respectively, and enzymatic properties of these supernatant of fermentation broth (liquid lipase) were stable at 4 °C for >3 months. Under optimized conditions, the ratio of biodiesel conversion after 12 h at 30 °C, using RML alone, was 68.5%. When RML was assisted by addition of MDL, biodiesel conversion ratio was increased to >95% under the same reaction conditions. The results suggested that combination of lipases with different specificity, for enzymatic conversion of more complex lipid substrates, is a potentially useful strategy for biodiesel production.     

Ethyl isovalerate synthesis using Candida rugosa lipase immobilized on silica nanoparticles prepared in nonionic reverse micelles

Uniform and monodispersed silica nanoparticles were synthesized with a mean diameter of 100 ± 20 nm as analyzed by Transmission Electron Microscopy (TEM). Glutaraldehyde was used as a coupling agent for efficient binding of the lipase onto the silica nanoparticles. For the hydrolysis of pNPP at pH 7.2, the activation energy within 25–40 °C for free and immobilized lipase was 7.8 and 1.25 KJ/mol, respectively. The V_max and K_m of immobilized lipase at 25 °C for pNPP hydrolysis were found to be 212 μmol/min/mg and 0.3 mM, whereas those for free lipase were 26.17 μmol/min and 1.427 mM, respectively. The lower activation energy of immobilized lipase in comparison to free lipase suggests a change in conformation of the enzyme leading to a requirement for lower energy on the surface of the nanoparticles. A better yield (7 fold higher) of ethyl isovalerate was observed using lipase immobilized onto silica nanoparticles in comparison to free lipase.     

Enhancing performance of lipase immobilized on methyl-modified silica aerogels at the adsorption and catalysis processes: Effect of cosolvents

Hydrophobic silica aerogels modified with methyl group were applied as support to immobilize Candida rugosa lipase (CRL). At the adsorption process, different alcohols were used to intensify the immobilization of CRL. The results showed that n-butanol wetting the hydrophobic support prior to contacting with enzyme solution could promote lipase activity, but the adsorption quantity onto the support decreased. Based on this, a novel immobilization method was proposed: the support contacted with enzyme solution without any alcohols, and then the immobilized enzymes were activated by 90% (V) n-butanol solution. The experimental results showed that this method could keep high adsorption quantity (413.0 mg protein/g support) and increase the lipase specific activity by more than 50%. To improve the stability of immobilized lipase, the support after adsorption was contacted with n-octane to form an oil layer covering the immobilized lipases, thus the leakage can be decreased from over 30–4% within 24 h. By utilizing proper cosolvents, a high enzyme activity and loading capacity as well as little loss of lipase was achieved without covalent linkage between the lipase and the support. This is known to be an excellent result for immobilization achieved by physical adsorption only.     

Hen egg white as a feeder protein for lipase immobilization

Enzyme stabilization via immobilization is one of the preferred processes as it provides the advantages of recovery and reusability. In this study, Thermomyces lanuginosus lipase has been immobilized through crosslinking using 2% glutaraldehyde and hen egg white, as an approach towards CLEA preparation. The immobilization efficiency and the properties of the immobilized enzyme in terms of stability to pH, temperature, and denaturants was studied and compared with the free enzyme. Immobilization efficiency of 56% was achieved with hen egg white. The immobilized enzyme displayed a shift in optimum pH towards the acidic side with an optimum at pH 4.0 whereas the pH optimum for free enzyme was at pH 6.0. The immobilized enzyme was stable at higher temperature retaining about 83% of its maximum activity as compared to the free enzyme retaining only 41% activity at 70 °C. The denaturation of lipase in free form was rapid with a half-life of 2 h at 60 °C and 58 min at 70 °C as compared to 12 h at 60 °C and 2 h at 70 °C for the immobilized enzyme. The effect of denaturants, urea and guanidine hydrochloride on the free and immobilized enzyme was studied and the immobilized enzyme was found to be more stable towards denaturants retaining 74% activity in 8 M urea and 98% in 6 M GndHCl as compared to 42% and 33% respectively in the case of free enzyme. The apparent K_m (2.08 mM) and apparent V_max (0.95 μmol/min) of immobilized enzyme was lower as compared to free enzyme; K_m (8.0 mM) and V_max (2.857 μmol/min). The immobilized enzyme was reused several times for the hydrolysis of olive oil.     

Investigating and optimizing the immobilization of levansucrase for increased transfructosylation activity and thermal stability

Levansucrase (LS) represents a key enzyme in glycoside synthesis of novel prebiotics and β-2,6-levan. The study of the effects of immobilization parameters of LS, produced from Bacillus amyloliquefaciens, onto glyoxyl agarose-iminodiacetic acid/Cu (glyoxyl agarose-IDA/Cu) by response surface methodology revealed the significance of their interactive effects. Retention of activity was altered by interactive effects from buffer molarity/time and buffer pH/buffer molarity. The optimized immobilization conditions were identified to be a protein loading of 9.09 mg protein/g support, a buffer concentration of 608 mM at pH 6.8 and an incubation time of 49 h. Normally a reducing agent is applied to the immobilized enzyme in order to promote the formation of covalent bonds. This step was replaced with the addition of the ionic polymer polyethylenimine (PEI), which provided a better compromise between retained activity and thermal stability of the immobilized LS. Indeed, LS immobilized onto glyoxyl agarose-IDA/Cu/PEI had a retention of activity of 70.91% with a protein yield of 44.73% and an activity yield of 54.69%, while exhibiting a half-life 4.7 times higher than that of the free LS at 50 °C.     

Optimization studies to develop a low-cost medium for production of the lipases of Rhizopus microsporus by solid-state fermentation and scale-up of the process to a pilot packed-bed bioreactor

A low-cost lipase preparation is required for enzymatic biodiesel synthesis. One possibility is to produce the lipase in solid-state fermentation (SSF) and then add the fermented solids (FS) directly to the reaction medium for biodiesel synthesis. In the current work, we scaled up the production of FS containing the lipases of Rhizopus microsporus. Initial experiments in flasks led to a low-cost medium containing wheat bran and sugarcane bagasse (50:50 w/w, dry basis), supplemented only with urea. We used this medium to scale-up production of FS, from 10 g in a laboratory column bioreactor to 15 kg in a pilot packed-bed bioreactor. This is the largest scale yet reported for lipase production in SSF. During scale-up, the hydrolytic activity of the FS decreased 57%: from 265 U g⁻¹ at 18 h in the laboratory bioreactor to 113 U g⁻¹ at 20 h in the pilot bioreactor. However, the esterification activity decreased by only 14%: from 12.1 U g⁻¹ to 10.4 U g⁻¹. When the FS produced in the laboratory and pilot bioreactors were dried and added directly to a solvent-free reaction medium to catalyze the esterification of oleic acid with ethanol, both gave the same ester content, 69% in 48 h.     

Pancreatic lipase inhibitory and antioxidative constituents from the aerial parts of Paeonia lactiflora Pall. (Ranunculaceae)

To date, there have been reports mostly about research results of the peony root in comparison to the aerial parts. According to our study, the aerial parts of P.lactiflora showed superior anti-oxidative and pancreatic lipase inhibitory activities than its root. Especially, the water extract and the ethyl acetate fraction of the ethanol extract exhibited potent pancreatic lipase inhibitory activity by 53.11 ± 1.22% and 46.16 ± 1.55% at the same dose of orlistat (62.5 ± 1.27%). The ethanol extract exhibited the best anti-oxidative activity with IC₅₀ of 17.08 ± 0.9 μg/mL, and the ethyl acetate fraction 19.75 ± 0.02 μg/mL, respectively, comparing to the positive control rutin (IC₅₀, 22.66 ± 0.29 μg/mL). From the anti-oxidative and pancreatic lipase inhibitory active fractions three new compounds, monplacphloroside (1), monplachydroxyquinoside (2) and herbacetin-7-O-β-d-sophoroside (3) were isolated along with 19 (4-22) known ones.Compounds, PGG (14), 1-O-methyl-2,3,4,6-tetra-O-galloyl-β-d-glucopyranose (17) and ethylgallate (9) were found to be the strongest antioxidants and pancreatic lipase inhibitors. Monoterpenes, albiflorin R₂ (19) and albiflorin (20) were determined for the first time as strong pancreatic lipase inhibitors. The presence of the esterified galloyl moiety, with its increasing numbers or the β-lactone cycle within the molecular structure plays an essential role for the enhancement of the pancreatic lipase enzyme inhibitory activity.     

Biocatalytic ethanolysis of palm oil for biodiesel production using microcrystalline lipase in tert-butanol system

Biocatalytic synthesis is a promising environmentally friendly process for the production of biodiesel, a sustainable alternative fuel from renewable plant resources. In order to develop an economical heterogeneous biocatalyst, protein-coated microcrystals (PCMCs) were prepared from a commercial enzyme preparation from a recombinant Aspergillus strain expressing Thermomyces lanuginosus lipase and used for synthesis of biodiesel from palm olein by ethanolysis. Reaction parameters, including catalyst loading, temperature, and oil/alcohol molar ratio have been systematically optimized. Addition of tert-butanol was found to markedly increase the biocatalyst activity and stability resulting in improved product yield. Optimized reactions (20%, w/w PCMC-lipase to triacylglycerol and 1:4 fatty acid equivalence/ethanol molar ratio) led to the production of alkyl esters from palm olein at 89.9% yield on molar basis after incubation at 45 °C for 24 h in the presence of tert-butanol at a 1:1 molar ratio to triacylglycerol. Crude palm oil and palm fatty acid distillate were also efficiently converted to biodiesel with 82.1 and 75.5% yield, respectively, with continual dehydration by molecular sieving. Operational stability of PCMC-lipase could be improved by treatment with tert-butanol allowing recycling of the biocatalyst for at least 8 consecutive batches with only slight reduction in activity. This work thus shows a promising approach for biodiesel synthesis with microcrystalline lipase which could be further developed for cost-efficient industrial production of biodiesel.     

Immobilization of acidic lipase derived from Pseudomonas gessardii onto mesoporous activated carbon for the hydrolysis of olive oil

Mesoporous activated carbon (MAC) derived from rice husk is used for the immobilization of acidic lipase (ALIP) produced from Pseudomonas gessardii. The purified acidic lipase had the specific activity and molecular weight of 1473 U/mg and 94 kDa respectively. To determine the optimum conditions for the immobilization of lipase onto MAC, the experiments were carried out by varying the time (10–180 min), pH (2–8), temperature (10–50 °C) and the initial lipase activity (49 × 10³, 98 × 10³, 147 × 10³ and 196 × 10³ U/l in acetate buffer). The optimum conditions for immobilization of acidic lipase were found to be: time—120 min; pH 3.5; temperature—30 °C, which resulted in achieving a maximum immobilization of 1834 U/g. The thermal stability of the immobilized lipase was comparatively higher than that in its free form. The free and immobilized enzyme kinetic parameters (K_m and V_max) were found using Michaelis–Menten enzyme kinetics. The K_m values for free enzyme and immobilized one were 0.655 and 0.243 mM respectively. The immobilization of acidic lipase onto MAC was confirmed using Fourier Transform-Infrared Spectroscopy, X-ray diffraction analysis and scanning electron microscopy.     

Immobilization of lipase on epoxy-activated Purolite® A109 and its post-immobilization stabilization

In this study, Purolite^® A109, polystyrenic macroporous resin, was used as immobilization support due to its good mechanical properties and high particle diameter (400 μm), which enables efficient application in enzyme reactors due to lower pressure drops. The surface of support had been modified with epichlorhydrine and was tested in lipase immobilization. Optimized procedure for support modification proved to be more efficient than conventional procedure for hydroxy groups (at 22 °C for 18 h), since duration of procedure was shortened to 40 min by performing modification at 52 °C resulting with almost doubled concentration of epoxy groups (563 μmol g⁻¹). Lipase immobilized on epoxy-modified support showed significantly improved thermal stability comparing to both, free form and commercial immobilized preparation (Novozym^® 435). The highest activity (47.5 IU g⁻¹) and thermal stability (2.5 times higher half-life than at low ionic strength) were obtained with lipase immobilized in high ionic strength. Thermal stability of immobilized lipase was further improved by blocking unreacted epoxy groups on supports surface with amino acids. The most efficient was treatment with phenylalanine, since in such a way blocked immobilized enzyme retained 65% of initial activity after 8 h incubation at 65 °C, while non-blocked derivative retained 12%.     

A novel mono- and diacylglycerol lipase highly expressed in Pichia pastoris and its application for food emulsifier preparation

A mono- and diacylglycerol lipase (MDL) was cloned from Penicillium cyclopium and expressed in Pichia pastoris strain GS115. The recombinant enzyme was named Lipase GH1. High cell density fermentation was performed by culture in a 7.5-L fermenter using BSMG medium, in which the phosphate in basal salt medium was replaced by sodium glycerophosphate (Na₂GP). The maximal lipase activity detected was 18,000 U per mL, and total protein content in the fermentation supernatant was 3.94 g per L. The activity of the liquid enzyme remained stable under alkaline conditions at 4 °C for 6 months and was 50% after one year. Lipase GH1 was used for the synthesis of mono- and diacylglycerols (MAGs and DAGs), which are commonly used emulsifiers for industrial applications. A conversion rate of 84% after 24 h of reaction was obtained using glycerol/oleic acid molar ratio 11:1, water content 1.5 wt%, enzyme dosage 80 U per g, and reaction temperature 35 °C. Lipase GH1 was more efficient for the synthesis of MAGs and DAGs than was Lipase G50 (a similar, commercially available lipase derived from Penicillium camemberti) when oleic acid was used as an acyl donor. Lipase GH1 has potential for food emulsifier preparation.     

Ectoine improves yield of biodiesel catalyzed by immobilized lipase

To improve the production of biodiesel by enzymatic conversion of triglycerides in cottonseed oil, compatible solutes were added to the solvent-free methanolysis system to prevent competitive methanol inhibition on the immobilized lipase (Novozym^® 435). The results indicated that the addition of ectoine increased biodiesel synthesis using a three-step methanol addition process. The concentration of methyl ester (ME) reached a maximum of 95.0% in the presence of 1.1 mmol/l ectoine, an increase of 20.9% compared to that in the absence of ectoine. On the other hand, excess ectoine decreased the ME concentration. Ectoine was also shown to enhance reuse of the immobilized lipase, significantly improving ME concentrations in each recycling test. Total concentrations of ME with added ectoine were about 1.5 times that without ectoine during five recycling tests (molar ratio of cottonseed oil to methanol, 1:4). Enzymatic reaction kinetics showed, in the concentration ranges of 0.8–1.14 mol/l and 0.03–8 mol/l for triglyceride and methanol, respectively, that ectoine had no effect on the initial reaction rates when methanol concentrations were below 0.5 mol/l. When methanol concentration exceeded 0.5 mol/l, the addition of 0.8 mmol/l ectoine increased the initial reaction rates, and the lipase exhibited a lower affinity for methanol and higher affinity for triglyceride (kinetic parameters of K_mA increase, K_mTG decrease). However, the initial reaction rates decreased significantly when 8 mmol/l ectoine was added, with the lipase having higher affinity for methanol and lower affinity for triglyceride (K_mA decrease, K_mTG increase). The supplementation of ectoine provided a new method for the purpose of improving yield of biodiesel catalyzed by enzyme.     

Use of a low-cost methodology for biodetoxification of castor bean waste and lipase production

The castor bean (Ricinus communis) represents a potential candidate for biodiesel production. The Petrobras Research Center is developing a biodiesel production process from castor bean seeds, in which an unwanted byproduct named castor bean waste is produced. This extremely alkaline waste is toxic and allergenic and, as such, poses a significant environmental problem. Solid-state fermentation (SSF) of castor bean waste was carried out to achieve ricin detoxification, reduce allergenic potential and stimulate lipase production. The fungus, Penicillium simplicissimum, an excellent lipase producer, was able to grow and produce lipase enzyme. After an optimization process, the maximum lipase activity achieved was 44.8 U/g. Moreover, the fungus P. simplicissimum was able to reduce the ricin content to non-detectable levels in addition to diminishing castor bean waste allergenic potential by approximately 16%. In this way, SSF of castor bean waste by P. simplicissimum may increase the utility of the waste by promoting enzyme production and eliminating the principal toxic element, ricin.     

Immobilization of Candida rugosa lipase on electrospun cellulose nanofiber membrane

A biocatalyst with high activity retention of lipase was fabricated by the covalent immobilization of Candida rugosa lipase on a cellulose nanofiber membrane. This nanofiber membrane was composed of nonwoven fibers with 200 nm nominal fiber diameter. It was prepared by electrospinning of cellulose acetate (CA) and then modified with alkaline hydrolysis to convert the nanofiber surface into regenerated cellulose (RC). The nanofiber membrane was further oxidized by NaIO₄. Aldehyde groups were simultaneously generated on the nanofiber surface for coupling with lipase. Response surface methodology (RSM) was applied to model and optimize the modification conditions, namely NaIO₄ content (2–10 mg/mL), reaction time (2–10 h), reaction temperature (25–35 °C) and reaction pH (5.5–6.5). Well-correlating models were established for the residual activity of the immobilized enzyme (R² = 0.9228 and 0.8950). We found an enzymatic activity of 29.6 U/g of the biocatalyst was obtained with optimum operational conditions. The immobilized lipase exhibited significantly higher thermal stability and durability than equivalent free enzyme.