Electrostatic immobilization of pectinase on negatively charged AOT-Fe3O4 nanoparticles

Enzyme immobilization on magnetic nanoparticles (MNPs) has been a field of intense studies in biotechnology during the past decade. The present study suggests MNPs negatively charged by docusate sodium salt (AOT) as a support for pectinase immobilization. AOT is a biocompatible anionic surfactant which can stabilize MNPs. Electrostatic adsorption can occur between enzyme with positive charge and oppositely charged surface of MNPs (ca. 100 nm). The effect of three factors, i.e. initial enzyme concentration, aqueous pH and AOT concentration in different levels was investigated on pectinase immobilization. Maximum specific activity (1.98 U/mg enzyme) of immobilized pectinase and maximum enzyme loading of 610.5 mg enzyme/g support was attained through the experiments. Initial enzyme concentration is significantly important on both loading and activity of immobilized enzyme, while pH and AOT concentration only affect the amount of immobilized enzyme. Immobilized enzyme on MNPs was recovered easily through magnetic separation. At near pH of immobilization, protein leakage in reusability of immobilized enzyme was low and activity loss was only 10–20% after six cycles. Since pH is associated with immobilization by electrostatic adsorption, the medium pH was changed to improve the release of protein from the support, as well. MNPs properties were investigated using Scanning Electron Microscopy (SEM), Fourier Transform Infrared (FT-IR) spectroscopy, and Dynamic Light Scattering (DLS) analysis.     

Purification and characterization of an extracellular cholesterol oxidase from a Bordetella species

A soil-isolated bacterium (strain B4) was identified as a species of Bordetella and deposited with the China General Microbiological Culture Collection (code, CGMCC 2229). The bacterium grew in a mineral medium, on cholesterol as a sole source of carbon and energy. Only one metabolite of cholesterol was accumulated in detectable amounts during the strain growth. It was identified as 4-cholesten-3-one. Cholesterol oxidase (COD) (EC 1.1.3.6), which catalyzes cholesterol into this metabolite, was evidenced from the strain. The conditions of the bacterium growth were optimized for extracellular enzyme production, which then reached around 1700 UL⁻¹ within 24 h culturing. The enzyme was purified from the spent medium of the strain to homogeneity on SDS-PAGE, and characterized. Its molecular mass, as estimated by this technique, was 55 kDa. COD showed an optimum activity at pH 7.0. It was completely stable at pH 5.0 and 4 °C for 48 h, and retained 80% at least of its initial activity at pH 4.0 or at a pH of 6.0–10.0. The optimum temperature for its reaction was 37 °C. The thermal stability of COD was appreciable, as 90% or 80% of its initial activity was recovered after 1 h or 2 h incubation at 50 °C. Ag⁺ or Hg⁺ at 1 mM, was inhibitor of COD activity, while Cu²⁺, at the same concentration, was activator. The COD K_m, determined at 37 °C and pH 7.0, was 0.556 mM. The enzyme was stable at pH 7.0 and 37 °C during 24 h mechanical shaking in the presence of 33% (v/v) of either of the solvents, dimethylsulfoxide, ethyl acetate, butanol, chloroform, benzene, xylene or cyclohexane.     

A novel thermostable GH5_7 β-mannanase from Bacillus pumilus GBSW19 and its application in manno-oligosaccharides (MOS) production

A novel thermostable mannanase from a newly isolated Bacillus pumilus GBSW19 has been identified, expressed, purified and characterized. The enzyme shows a structure comprising a 28 amino acid signal peptide, a glycoside hydrolase family 5 (GH5) catalytic domain and no carbohydrate-binding module. The recombinant mannanase has molecular weight of 45 kDa with an optimal pH around 6.5 and is stable in the range from pH 5–11. Meanwhile, the optimal temperature is around 65 °C, and it retains 50% relative activity at 60 °C for 12 h. In addition, the purified enzyme can be activated by several ions and organic solvents and is resistant to detergents. Bpman5 can efficiently convert locus bean gum to mainly M2, M3 and M5, and hydrolyze manno-oligosaccharides with a minimum DP of 3. Further exploration of the optimum condition using HPLC to prepare oligosaccharides from locust bean gum was obtained as 10 mg/ml locust bean gum incubated with 10 U/mg enzyme at 50 °C for 24 h. By using this enzyme, locust bean gum can be utilized to generate high value-added oligosaccharides with a DP of 2–6.     

Stabilization of ficin extract by immobilization on glyoxyl agarose. Preliminary characterization of the biocatalyst performance in hydrolysis of proteins

A protein extract containing ficin was immobilized on glyoxyl agarose at pH 10 and 25 °C. The free enzyme remained fully active after 24 h at pH 10. However the enzyme immobilized on the support retained only 30% of the activity after this time using a small substrate. After checking the stability of ficin preparations obtained after different enzyme-support multi-interaction times, it was found that it reached a maximum at 3 h (40-folds more stable than the free enzyme at pH 5). The immobilized enzyme was active in a wide range of pH (e.g., retained double activity at pH 10 than the free enzyme) and temperatures (e.g., at 80 °C retained three-folds more activity than the free enzyme). The activity versus casein almost matched the results using the small substrate (60%) at 55 °C. However, in the presence of 2 M of urea, it became three times more active than the free enzyme. The immobilized enzyme could be reused five cycles at 55 °C without losing activity.     

Stability of phycocyanin extracted from Spirulina sp.: Influence of temperature,pH and preservatives

Temperature and pH play an important role in the stability of phycocyanin, a natural blue colorant. Systematic investigations showed the maximum stability of phycocyanin was in the pH range 5.5–6.0. Incubation at temperatures between 47 and 64 °C caused the concentration (C_R) and half-life of phycocyanin in solution to decrease rapidly. The C_R value remained at approximately 50% after incubating for 30 min at 59 °C. After heating at 60 °C for 15 min, the C_R value of phycocyanin at pH 7.0 was maintained at around 62–70% when 20–40% glucose or sucrose was added, and the half-life increased from 19 min to 30–44 min. 2.5% sodium chloride was found to be an effective preservative for phycocyanin at pH 7.0 as a C_R value of 76% was maintained and the half-life of 67 min was increased.     

Hen egg white as a feeder protein for lipase immobilization

Enzyme stabilization via immobilization is one of the preferred processes as it provides the advantages of recovery and reusability. In this study, Thermomyces lanuginosus lipase has been immobilized through crosslinking using 2% glutaraldehyde and hen egg white, as an approach towards CLEA preparation. The immobilization efficiency and the properties of the immobilized enzyme in terms of stability to pH, temperature, and denaturants was studied and compared with the free enzyme. Immobilization efficiency of 56% was achieved with hen egg white. The immobilized enzyme displayed a shift in optimum pH towards the acidic side with an optimum at pH 4.0 whereas the pH optimum for free enzyme was at pH 6.0. The immobilized enzyme was stable at higher temperature retaining about 83% of its maximum activity as compared to the free enzyme retaining only 41% activity at 70 °C. The denaturation of lipase in free form was rapid with a half-life of 2 h at 60 °C and 58 min at 70 °C as compared to 12 h at 60 °C and 2 h at 70 °C for the immobilized enzyme. The effect of denaturants, urea and guanidine hydrochloride on the free and immobilized enzyme was studied and the immobilized enzyme was found to be more stable towards denaturants retaining 74% activity in 8 M urea and 98% in 6 M GndHCl as compared to 42% and 33% respectively in the case of free enzyme. The apparent K_m (2.08 mM) and apparent V_max (0.95 μmol/min) of immobilized enzyme was lower as compared to free enzyme; K_m (8.0 mM) and V_max (2.857 μmol/min). The immobilized enzyme was reused several times for the hydrolysis of olive oil.     

Immobilization of alkaline serine endopeptidase from Bacillus licheniformis on SBA-15 and MCF by surface covalent binding

An industrial enzyme, alkaline serine endopeptidase, was immobilized on surface modified SBA-15 and MCF materials by amide bond formation using carbodiimide as a coupling agent. The specific activities of free enzyme and enzyme immobilized on SBA-15 and MCF were studied using casein (soluble milk protein) as a substrate. The highest activity of free enzyme was obtained at pH 9.5 while this value shifted to pH 10 for SBA-15 and MCF immobilized enzyme. The highest activity of immobilized enzymes was obtained at higher temperature (60 °C) than that of the free enzyme (55 °C). Kinetic parameters, Michaelis–Menten constant (K_m) and maximum reaction velocity (V_max), were calculated as K_m = 13.375, 11.956, and 8.698 × 10^?4 mg/ml and V_max = 0.156, 0.163 and 0.17 × 10^?3 U/mg for the free enzyme and enzyme immobilized on SBA-15 and MCF, respectively. The reusability of immobilized enzyme showed 80% of the activity retained even after 15 cycles. Large pore sized MCF immobilized enzyme was found to be more promising than the SBA-15 immobilized enzyme due to the availability of larger pores of MCF, which offer facile diffusion of substrate and product molecules.     

Enzyme, β-galactosidase immobilized on membrane surface for galacto-oligosaccharides formation from lactose: Kinetic study with feed flow under recirculation loop

The work focuses on producing galacto-oligosaccharides (GOS) through an enzymatic reaction with lactose under a partial recirculation loop by utilizing membrane-immobilized β-galactosidase. Cross-linking through covalent bonding, using gluteraldehyde, was employed to immobilize enzyme on a microporous polyvinylidene fluoride membrane. GOS synthesis was carried out in a laboratory fabricated reaction cell, whereby three immobilized membranes were housed in series. The reaction was conducted at varying initial lactose concentrations (ILCs) and feed flow rates at pH 6 and 40 °C. A maximum GOS of 30% (dry basis) was obtained after 60 h of reaction time, 50 g/L ILC, 241 U of enzyme (specific loading of 600 U/g-membrane), and 0.5 mL/min of feed flow rate at 56% lactose conversion. The GOS yield increased with increased ILC and decreased feed flow rate. The selectivity of GOS formation increased by increasing both the ILC and the feed flow rate, whereas the reverse was true for mono-saccharides. The immobilized enzyme retained ∼50% of its initial activity after 30 days of storage at 20 °C, while the native enzyme lost 100% of its activity within 21 days. Furthermore, a five-step, nine-parameter model was developed, and simulated results showed excellent agreement with the experimental data.     

Response surface methodology: Synthesis of short chain fructooligosaccharides with a fructosyltransferase from Aspergillus aculeatus

A transferase was isolated, purified and characterised from Aspergillus aculeatus. The enzyme exhibited a pH and temperature optima of 6.0 and 60 °C, respectively and under such conditions remained stable with no decrease in activity after 5 h. The enzyme was purified 7.1 fold with a yield of 22.3% and specific activity of 486.1 U mg^?1 after dialysis, concentration with polyethyleneglycol (30%) and DEAE-Sephacel chromatography. It was monomeric with a molecular mass of 85 kDa and K_m and V_max values of 272.3 mM and 166.7 μmol min^?1 ml^?1. The influence of pH, temperature, reaction time, and enzyme and sucrose concentration on the formation of short-chain fructooligosaccharides (FOS) was examined by statistical response surface methodology (RSM). The enzyme showed both transfructosylation and hydrolytic activity with the transfructosylation ratio increasing to 88% at a sucrose concentration of 600 mg ml^?1. Sucrose concentration (400 mg ml^?1) temperature (60 °C), and pH (5.6) favoured the synthesis of high levels of GF₃ and GF₄. Incubation time had a critical effect on the yield of FOS as the major products were GF₂ after 4 h and GF₄ after 8 h. A prolonged incubation of 16 h resulted in the conversion of GF₄ into GF₂ as a result of self hydrolase activity.     

Polyaniline grafted polyacylonitrile conductive composite fibers for reversible immobilization of enzymes: Stability and catalytic properties of invertase

Polyacylonitrile fibers (PAN) surfaces were modified with chemical polymerization of conductive polyaniline (PANI) in the presence of potassium dichromate as an oxidizing agent. The effect of aniline concentration on the grafting efficiency and on the electrical surface resistance of PAN/PANI composite fibers was investigated. The surface resistance of the conductive composite fibers in this work was found to be between 8.0 and 0.5 kΩ/cm. As the amount of grafted PANI increased on the PAN fibers the electrical resistance of composite fibers decreased. The PAN/PANI composite fibers were characterized by SEM and FTIR studies. Composite PAN/PANI fibers were used for reversible immobilization of invertase. The immobilization efficiency and the activity of the immobilized invertase (from 1.0 mg/mL invertase solution at pH 5.5) were increased with increasing PANI contents of the composite fibers. The maximum amount of immobilized enzyme onto composite fibers containing 2.0% PANI was about 76.6 mg/g. The optimum pH for the free enzyme was observed at 5.0. On the other hand, immobilized invertase yielded a broad optimum pH profile between pH 5.0 and 7.0. Immobilized invertase exhibited 83% of its original activity even after two months storage at 4 °C while the free enzyme showed only 7% of its initial activity.     

Efficiencies of designed enzyme combinations in releasing arabinose and xylose from wheat arabinoxylan in an industrial ethanol fermentation residue

The generation of a fermentable hydrolysate from arabinoxylan is an important prerequisite for utilization of wheat hemicellulose in production of ethanol or other value added products. This study examined the individual and combined efficiencies of four selected, commercial, multicomponent enzyme preparations Celluclast 1.5 L (from Trichoderma reesei), Finizym (from Aspergillus niger), Ultraflo L (from Humicola insolens), and Viscozyme L (from Aspergillus aculeatus) in catalyzing arabinose and xylose release from water-soluble wheat arabinoxylan in an industrial fermentation residue (still bottoms) in lab scale experiments. Different reaction conditions, i.e. enzyme dosage, reaction time, pH, and temperature, were evaluated in response surface and ternary mixture designs. Ultraflo L treatment gave optimal arabinose release: treatment (6 h, 60 °C, pH 6) with this enzyme preparation liberated up to 46% by weight (wt.%) of the theoretically maximal arabinose yield from the substrate. Celluclast 1.5 L was superior to the other enzyme preparations in releasing xylose and catalyzed release of up to 25 wt.% of the theoretical maximum xylose yield (6 h, 60 °C, pH 4). Prolonged treatment for 24 h with a 50:50 mixture of Celluclast 1.5 L and Ultraflo L at 50 °C, pH 5 exhibited a synergistic effect in xylose release and 62 wt.% of the theoretically maximal xylose yield was achieved. Addition of pure β-xylosidase from T. reesei to the Ultraflo L preparation released the same amounts of xylose from the substrate as the 50:50 mixture of Celluclast 1.5 L and Ultraflo L. The data thus signified that the synergistic effect in xylose release between Celluclast 1.5 L and Ultraflo L is the result of a three-step interaction mechanism involving α-l-arabinofuranosidase and different xylan degrading enzyme activities in the two enzyme preparations.     

Purification and physicochemical properties of polygalacturonase from Aspergillus niger MTCC 3323

Polygalacturonases are the pectinolytic enzymes that catalyze the hydrolytic cleavage of the polygalacturonic acid chain. In the present study, polygalacturonase from Aspergillus niger (MTCC 3323) was purified. The enzyme precipitated with 60% ethanol resulted in 1.68-fold purification. The enzyme was purified to 6.52-fold by Sephacryl S-200 gel-filtration chromatography. On SDS–PAGE analysis, enzyme was found to be a heterodimer of 34 and 69 kDa subunit. Homogeneity of the enzyme was checked by NATIVE-PAGE and its molecular weight was found to be 106 kDa. The purified enzyme showed maximum activity in the presence of polygalacturonic acid at temperature of 45 °C, pH of 4.8, reaction time of 15 min. The enzyme was stable within the pH range of 4.0–5.5 for 1 h. At 4 °C it retained 50% activity after 108 h but at room temperature it lost its 50% activity after 3 h. The addition of Mn²⁺, K⁺, Zn²⁺, Ca²⁺ and Al³⁺ inhibited the enzyme activity; it increased in the presence of Mg²⁺ and Cu²⁺ ions. Enzyme activity was increased on increasing the substrate concentration from 0.1% to 0.5%. The K_m and V_max values of the enzyme were found to be 0.083 mg/ml and 18.21 μmol/ml/min. The enzyme was used for guava juice extraction and clarification. The recovery of juice of enzymatically treated pulp increased from 6% to 23%. Addition of purified enzyme increased the %T₆₅₀ from 2.5 to 20.4 and °Brix from 1.9 to 4.8. The pH of the enzyme treated juice decreased from 4.5 to 3.02.     

Stability and structural changes of horseradish peroxidase: Microwave versus conventional heating treatment

Effects of conventional heating (CH) and microwave (MW) on the structure and activity of horseradish peroxidase (HRP) in buffer solution were studied. CH incubation between 30 and 45 °C increased activity of HRP, reaching 170% of residual activity (RA) after 4–6 h at 45 °C. CH treatment at 50 and 60 °C caused HRP inactivation: RA was 5.7 and 16.7% after 12 h, respectively. Secondary and tertiary HRP structural changes were analyzed by circular dichroism (CD) and intrinsic fluorescence emission, respectively. Under CH, activation of the enzyme was attributed to conformational changes in secondary and tertiary structures. MW treatment had significant effects on the residual activity of HRP. MW treatment at 45 °C/30 W followed by CH treatment 45 °C regenerated the enzyme activity. The greatest loss in activity occurred at 60 °C/60 W/30 min (RA 16.9%); without recovery of the original activity. The inactivation of MW-treated HRP was related to the loss of tertiary structure, indicating changes around the tryptophan environment.     

Structural characterization of thermostable,solvent tolerant,cytosafe tannase from Bacillus subtilis PAB2

Tannase production by Bacillus subtilis PAB2, was investigated under solid state fermentation using tamarind seed as sole carbon source and it was found as the highest titer (73.44 U/gds). The enzyme was purified to homogeneity, which showed the molecular mass around 52 kDa (K_m = 0.445 mM, V_max = 125.8 mM/mg/min and K_cat = 2.88 min^–1). The enzyme was found stable in a range of pH (3.0–8.0) and temperature (30–70 °C) with an optimal activity at pH 5.0, pI of 4.4 and at 40 °C temperature. It exhibited half-life (t_1/2) of 4.5 h at 60 °C. The enzyme comprised a typical secondary structure containing α-helix (9.3%), β-pleated sheet (33.6%) and β-turn (17.2%). The native conformation of the enzyme was alike a 44 nm spherical nanoparticle upon aggregation. Thermodynamic parameters of tannase revealed that it was stable at 40 °C and showed Q₁₀, ΔG_d and ΔS_d values of 2.08, 99.37 KJ/mol and 252.38 J mol⁻¹ K⁻¹, respectively. Organic solvents were stimulatory with regard to enzyme activity. Moreover, the altered enzyme activity was determined to be correlated with the changes in structural conformation in presence of inducer and inhibitor. Tannase was explored to have no cytotoxicity on Vero cell line as well as rat model study.     

Purification and biochemical characterization of a mycelial glucose- and xylose-stimulated β-glucosidase from the thermophilic fungus Humicola insolens

A mycelial β-glucosidase from the thermophilic mold Humicola insolens was purified and biochemically characterized. The enzyme showed carbohydrate content of 21% and apparent molecular mass of 94 kDa, as estimated by gel filtration. Sodium dodecyl sulfate polyacrylamide gel electrophoresis analysis showed a single polypeptide band of 55 kDa, suggesting that the native enzyme was a homodimer. Mass spectrometry analysis showed amino acid sequence similarity with a β-glucosidase from Humicola grisea var. thermoidea, with about 22% coverage. Optima of temperature and pH were 60 °C and 6.0–6.5, respectively. The enzyme was stable up to 1 h at 50 °C and showed a half-life of approximately 44 min at 55 °C. The β-glucosidase hydrolyzed cellobiose, lactose, p-nitrophenyl-β-d-glucopyranoside, p-nitrophenyl-β-d-fucopyranoside, p-nitrophenyl-β-d-xylopyranoside, p-nitrophenyl-β-d-galactopyranoside, o-nitrophenyl-β-d-galactopyranoside, and salicin. Kinetic studies showed that p-nitrophenyl-β-d-fucopyranoside and cellobiose were the best enzyme substrates. Enzyme activity was stimulated by glucose or xylose at concentrations up to 400 mM, with maximal stimulatory effect (about 2-fold) around 40 mM. The high catalytic efficiency for the natural substrate, good thermal stability, strong stimulation by glucose or xylose, and tolerance to elevated concentrations of these monosaccharides qualify this enzyme for application in the hydrolysis of cellulosic materials.     

Comparative biochemical characterization of soluble and chitosan immobilized β-galactosidase from Kluyveromyces lactis NRRL Y1564

An investigation was conducted on the production of β-galactosidase (β-gal) by different strains of Kluyveromyces, using lactose as a carbon source. The maximum enzymatic activity of 3.8 ± 0.2 U/mL was achieved by using Kluyveromyces lactis strain NRRL Y1564 after 28 h of fermentation at 180 rpm and 30 °C. β-gal was then immobilized onto chitosan and characterized based on its optimal operation pH and temperature, its thermal stability and its kinetic parameters (K_m and V_max) using o-nitrophenyl β-d-galactopyranoside as substrate. The optimal pH for soluble β-gal activity was found to be 6.5 while the optimal pH for immobilized β-gal activity was found to be 7.0, while the optimal operating temperatures were 50 °C and 37 °C, respectively. At 50 °C, the immobilized enzyme showed an increased thermal stability, being 8 times more stable than the soluble enzyme. The immobilized enzyme was reused for 10 cycles, showing stability since it retained more than 70% of its initial activity. The immobilized enzyme retained 100% of its initial activity when it was stored at 4 °C and pH 7.0 for 93 days. The soluble β-gal lost 9.4% of its initial activity when it was stored at the same conditions.     

Characterization of functionally active immobilized carbonic anhydrase purified from sheep blood lysates

Carbonic anhydrase (CA) catalyzes the reversible reaction of hydration of CO₂ to bicarbonate and the dehydration of bicarbonate back to CO₂. Sequestration of CO₂ from industrial processes or breathing air may require a large amount of highly active and stable CA. Therefore, the objectives of the present study were to purify large amounts of CA from a cheap and easily accessible source of the enzyme and to characterize the enzymatic and kinetic properties of soluble and immobilized enzyme. We recovered 80% of pure enzyme with a specific activity of 4870 EU/mg protein in a single step using sheep blood lysates from slaughter house waste products and CA specific inhibitor affinity chromatography. Since affinity pure CA showed both anhydrase and esterase activities, we measured the esterase activities for enzymology. The Michaelis–Menten constant, K_M, pH optimum, activation energy, and thermal stability of soluble enzymes were 8 × 10^?2 M, 7.3 pH, 7.3 kcal/mol and 70 °C, respectively.The immobilization of the enzyme to Affigel-10 was very efficient and 83% of purified enzyme was immobilized. The immobilized enzyme showed a K_M of 5 × 10^?2 M and activation energy of 8.9 kcal/mol, suggesting a better preference of substrate for immobilized enzyme in comparison to soluble enzyme. In contrast to soluble enzyme, immobilized enzyme showed relatively higher activity at pH 6–8. From these results, we concluded that a shift in pH profile toward acidic pH is due to modification of lysine residues involved in the immobilization process. The immobilized enzyme was stable at higher temperatures and showed highest activity at 80 °C. The activity of immobilized enzyme in a flow reactor at 0.5–2.2 ml/min flow rate was unaffected. Collectively, results from the present study suggested the application of blood lysate waste from animal slaughterhouses for purification of homogeneous enzyme for CO₂ capture in a flow reactor.     

Purification and characterization of an exo-polygalacturonase produced by Penicillium viridicatum RFC3 in solid-state fermentation

The pectinolytic enzyme obtained from Penicillium viridicatum RFC by solid-state fermentation was purified to homogeneity by pretreatment with kaolin (40 mg mL⁻¹) and ultrafiltration, followed by chromatography on a Sephadex G50 column. The apparent molecular weight of the enzyme was 24 kDa. Maximal activity occurred at pH 6.0 and at 60 °C. The enzyme proved to be an exo-polygalacturonase, releasing galacturonic acid by hydrolysis of highly esterified pectin. The presence of 10 mM Ba²⁺ increased the enzyme activity by 96% and its thermal stability by 30%, besides increasing its stability at acid pH. The apparent K_m with apple pectin as substrate was 1.82 mg mL⁻¹ and the V_max was 81 μmol min⁻¹ mg⁻¹.     

Immobilization of α-galactosidase on galactose-containing polymeric beads

Industrial application of α-galactosidase requires efficient methods to immobilize the enzyme, yielding a biocatalyst with high activity and stability compared to free enzyme. An α-galactosidase from tomato fruit was immobilized on galactose-containing polymeric beads. The immobilized enzyme exhibited an activity of 0.62 U/g of support and activity yield of 46%. The optimum pH and temperature for the activity of both free and immobilized enzymes were found as pH 4.0 and 37 °C, respectively. Immobilized α-galactosidase was more stable than free enzyme in the range of pH 4.0–6.0 and more than 85% of the initial activity was recovered. The decrease in reaction rate of the immobilized enzyme at temperatures above 37 °C was much slower than that of the free counterpart. The immobilized enzyme shows 53% activity at 60 °C while free enzyme decreases 33% at the same temperature. The immobilized enzyme retained 50% of its initial activity after 17 cycles of reuse at 37 °C. Under same storage conditions, the free enzyme lost about 71% of its initial activity over a period of 7 months, whereas the immobilized enzyme lost about only 47% of its initial activity over the same period. Operational stability of the immobilized enzyme was also studied and the operational half-life (t_1/2 was determined as 6.72 h for p-nitrophenyl α-d-galactopyranoside (PNPG) as substrate. The kinetic parameters were determined by using PNPG as substrate. The K_m and V_max values were measured as 1.07 mM and 0.01 U/mg for free enzyme and 0.89 mM and 0.1 U/mg for immobilized enzyme, respectively. The synthesis of the galactose-containing polymeric beads and the enzyme immobilization procedure are very simple and also easy to carry out.     

Optimization of the immobilization of sweet potato amylase using glutaraldehyde-agarose support. Characterization of the immobilized enzyme

A simplified procedure for the preparation of immobilized beta-amylase using non-purified extract from fresh sweet potato tubers is established in this paper, using differently activated agarose supports. Beta-amylase glutaraldehyde derivative was the preparation with best features, presenting improved temperature and pH stability and activity. The possibility of reusing the amylase was also shown, when this immobilized enzyme was fully active for five cycles of use. However, immobilization decreased enzyme activity to around 15%. This seems to be mainly due to diffusion limitations of the starch inside the pores of the biocatalyst particles. A fifteen-fold increase in the Km was noticed, while the decrease of Vmax was only 30% (10.1 U mg^?1 protein and 7.03 U mg^?1 protein for free and immobilized preparations, respectively).