Metabolic engineering of Clostridium acetobutylicum for butyric acid production with high butyric acid selectivity

A typical characteristic of the butyric acid-producing Clostridium is coproduction of both butyric and acetic acids. Increasing the butyric acid selectivity important for economical butyric acid production has been rather difficult in clostridia due to their complex metabolic pathways. In this work, Clostridium acetobutylicum was metabolically engineered for highly selective butyric acid production. For this purpose, the second butyrate kinase of C. acetobutylicum encoded by the bukII gene instead of butyrate kinase I encoded by the buk gene was employed. Furthermore, metabolic pathways were engineered to further enhance the NADH-driving force. Batch fermentation of the metabolically engineered C. acetobutylicum strain HCBEKW (pta⁻, buk⁻, ctfB⁻ and adhE1⁻) at pH 6.0 resulted in the production of 32.5 g/L of butyric acid with a butyric-to-acetic acid ratio (BA/AA ratio) of 31.3 g/g from 83.3 g/L of glucose. By further knocking out the hydA gene (encoding hydrogenase) in the HCBEKW strain, the butyric acid titer was not further improved in batch fermentation. However, the BA/AA ratio (28.5 g/g) obtained with the HYCBEKW strain (pta⁻, buk⁻, ctfB⁻, adhE1⁻ and hydA⁻) was 1.6 times higher than that (18.2 g/g) obtained with the HCBEKW strain at pH 5.0, while no improvement was observed at pH 6.0. These results suggested that the buk gene knockout was essential to get a high butyric acid selectivity to acetic acid in C. acetobutylicum.     

Targeted mutagenesis of the Clostridium acetobutylicum acetone–butanol–ethanol fermentation pathway

The production of the chemical solvents acetone and butanol by the bacterium Clostridium acetobutylicum was one of the first large-scale industrial processes to be developed, and in the first part of the last century ranked second in importance only to ethanol production. After a steep decline in its industrial use, there has been a recent resurgence of interest in the acetone–butanol–ethanol (ABE) fermentation process, with a particular emphasis on butanol production. In order to generate strains suitable for efficient use on an industrial scale, metabolic engineering is required to alter the AB ratio in favour of butanol, and eradicate the production of unwanted products of fermentation. Using ClosTron technology, a large-scale targeted mutagenesis in C. acetobutylicum ATCC 824 was carried out, generating a set of 10 mutants, defective in alcohol/aldehyde dehydrogenases 1 and 2 (adhE1, adhE2), butanol dehydrogenases A and B (bdhA, bdhB), phosphotransbutyrylase (ptb), acetate kinase (ack), acetoacetate decarboxylase (adc), CoA transferase (ctfA/ctfB), and a previously uncharacterised putative alcohol dehydrogenase (CAP0059). However, inactivation of the main hydrogenase (hydA) and thiolase (thl) could not be achieved. Constructing such a series of mutants is paramount for the acquisition of information on the mechanism of solvent production in this organism, and the subsequent development of industrial solvent producing strains. Unexpectedly, bdhA and bdhB mutants did not affect solvent production, whereas inactivation of the previously uncharacterised gene CAP0059 resulted in increased acetone, butanol, and ethanol formation. Other mutants showed predicted phenotypes, including a lack of acetone formation (adc, ctfA, and ctfB mutants), an inability to take up acids (ctfA and ctfB mutants), and a much reduced acetate formation (ack mutant). The adhE1 mutant in particular produced very little solvents, demonstrating that this gene was indeed the main contributor to ethanol and butanol formation under the standard batch culture conditions employed in this study. All phenotypic changes observed could be reversed by genetic complementation, with exception of those seen for the ptb mutant. This mutant produced around 100 mM ethanol, no acetone and very little (7 mM) butanol. The genome of the ptb mutant was therefore re-sequenced, together with its parent strain (ATCC 824 wild type), and shown to possess a frameshift mutation in the thl gene, which perfectly explained the observed phenotype. This finding reinforces the need for mutant complementation and Southern Blot analysis (to confirm single ClosTron insertions), which should be obligatory in all further ClosTron applications.     

New insights into the butyric acid metabolism of Clostridium acetobutylicum

Biosynthesis of acetone and n-butanol is naturally restricted to the group of solventogenic clostridia with Clostridium acetobutylicum being the model organism for acetone-butanol-ethanol (ABE) fermentation. According to limited genetic tools, only a few rational metabolic engineering approaches were conducted in the past to improve the production of butanol, an advanced biofuel. In this study, a phosphotransbutyrylase-(Ptb) negative mutant, C. acetobutylicum ptb::int(87), was generated using the ClosTron methodology for targeted gene knock-out and resulted in a distinct butyrate-negative phenotype. The major end products of fermentation experiments without pH control were acetate (3.2?g/l), lactate (4.0?g/l), and butanol (3.4?g/l). The product pattern of the ptb mutant was altered to high ethanol (12.1?g/l) and butanol (8.0?g/l) titers in pH?≥?5.0-regulated fermentations. Glucose fed-batch cultivation elevated the ethanol concentration to 32.4?g/l, yielding a more than fourfold increased alcohol to acetone ratio as compared to the wildtype. Although butyrate was never detected in cultures of C. acetobutylicum ptb::int(87), the mutant was still capable to take up butyrate when externally added during the late exponential growth phase. These findings suggest that alternative pathways of butyrate re-assimilation exist in C. acetobutylicum, supposably mediated by acetoacetyl-CoA:acyl-CoA transferase and acetoacetate decarboxylase, as well as reverse reactions of butyrate kinase and Ptb with respect to previous studies.     

Trophic link between syntrophic acetogens and homoacetogens during the anaerobic acidogenic fermentation of sewage sludge

Acetate production during anaerobic sludge treatment has significant economic and environmental benefits. In this study, trophic links between syntrophic acetogens and homoacetogens in the anaerobic acidogenic fermentation of sewage sludge were investigated using methanogenic inhibitor 2-bromoethanesulfonate (BES) to block the methanogenesis pathway and butyrate to enhance syntrophic acetogenesis. The Gibbs free energies (ΔG) of the butyrate-degrading and homoacetogenic processes were close to the thermodynamic threshold of the reaction activity (−15 kJ/mol). In addition, microbial quantification analysis revealed that the growth of syntrophic acetogenic bacteria and homoacetogens in the treatment incubations was higher than that of the control. The results indicated that hydrogen-producing butyrate degraders are stimulated with homoacetogens when methanogenesis was specifically inhibited.     

Enhanced solvent production by metabolic engineering of a twin-clostridial consortium

The efficient fermentative production of solvents (acetone, n-butanol, and ethanol) from a lignocellulosic feedstock using a single process microorganism has yet to be demonstrated. Herein, we developed a consolidated bioprocessing (CBP) based on a twin-clostridial consortium composed of Clostridium cellulovorans and Clostridium beijerinckii capable of producing cellulosic butanol from alkali-extracted, deshelled corn cobs (AECC). To accomplish this a genetic system was developed for C. cellulovorans and used to knock out the genes encoding acetate kinase (Clocel_1892) and lactate dehydrogenase (Clocel_1533), and to overexpress the gene encoding butyrate kinase (Clocel_3674), thereby pulling carbon flux towards butyrate production. In parallel, to enhance ethanol production, the expression of a putative hydrogenase gene (Clocel_2243) was down-regulated using CRISPR interference (CRISPRi). Simultaneously, genes involved in organic acids reassimilation (ctfAB, cbei_3833/3834) and pentose utilization (xylR, cbei_2385 and xylT, cbei_0109) were engineered in C. beijerinckii to enhance solvent production. The engineered twin-clostridia consortium was shown to decompose 83.2 g/L of AECC and produce 22.1 g/L of solvents (4.25 g/L acetone, 11.5 g/L butanol and 6.37 g/L ethanol). This titer of acetone-butanol-ethanol (ABE) approximates to that achieved from a starchy feedstock. The developed twin-clostridial consortium serves as a promising platform for ABE fermentation from lignocellulose by CBP.     

Triphasic esterification of butanol and butyric acid in fermentation media

Butanol and butyric acid produced from acetone-butanol-ethanol (ABE) fermentation can be used to produce butyl butyrate, an important fragrance ester. However, low levels of butanol and butyric acid need to be purified from culture media first with energy-intensive distillation processes. In this study, a triphasic (organic/aqueous/fluorous) system is developed to esterify butanol and butyric acid in spent culture media into butyl butyrate directly without purification. The produced butyl butyrate forms a distinct organic phase floating on top and can then be separated easily. In a model system containing 37.1 g/L of butanol and 44.1 g/L of butyric acid, 57% of the butanol is converted to butyl butyrate after 8 h of esterification. With multiple cycles of esterification and product removal, butanol conversion can be further increased to 86%. When spent culture medium containing 7.12 g/L of butanol and 4.81 g/L of butyric acid is used for esterification, 38% of butanol (0.36 mmol) is consumed and 0.33 mmol of butyl butyrate is produced. However, when ABE fermentation and esterification are carried out simultaneously, only 0.042 mmol of butyl butyrate is produced, probably due to the incompatible pH requirements for cell growth (pH 5–7) and esterification (pH 2–3).     

Dihydroxyacetone production in an engineered Escherichia coli through expression of Corynebacterium glutamicum dihydroxyacetone phosphate dephosphorylase

Dihydroxyacetone (DHA) has several industrial applications such as a tanning agent in tanning lotions in the cosmetic industry; its production via microbial fermentation would present a more sustainable option for the future. Here we genetically engineered Escherichia coli (E. coli) for DHA production from glucose. Deletion of E. coli triose phosphate isomerase (tpiA) gene was carried out to accumulate dihydroxyacetone phosphate (DHAP), for use as the main intermediate or precursor for DHA production. The accumulated DHAP was then converted to DHA through the heterologous expression of Corynebacterium glutamicum DHAP dephosphorylase (cghdpA) gene. To conserve DHAP exclusively for DHA production we removed methylglyoxal synthase (mgsA) gene in the ΔtpiA strain. This drastically improved DHA production from 0.83 g/l (0.06 g DHA/g glucose) in the ΔtpiA strain bearing cghdpA to 5.84 g/l (0.41 g DHA/g glucose) in the ΔtpiAΔmgsA double mutant containing the same gene. To limit the conversion of intracellular DHA to glycerol, glycerol dehydrogenase (gldA) gene was further knocked out resulting in a ΔtpiAΔmgsAΔgldA triple mutant. This triple mutant expressing the cghdpA gene produced 6.60 g/l of DHA at 87% of the maximum theoretical yield. In summary, we demonstrated an efficient system for DHA production in genetically engineered E. coli strain.     

Genetic manipulation of acid and solvent formation in clostridium acetobutylicum ATCC 824

The genes coding for enzymes involved in butanol or butyrate formation were subcloned into a novel Escherichia coli-Clostridium acetobutylicum shuttle vector constructed from pIMP1 and a chloramphenicol acetyl transferase gene. The resulting replicative plasmids, referred to as pTHAAD (aldehyde/alcohol dehydrogenase) and pTHBUT (butyrate operon), were used to complement C. acetobutylicum mutant strains, in which genes encoding aldehyde/alcohol dehydrogenase (aad) or butyrate kinase (buk) had been inactivated by recombination with Emr constructs. Complementation of strain PJC4BK (buk mutant) with pTHBUT restored butyrate kinase activity and butyrate production during exponential growth. Complementation of strain PJC4AAD (aad mutant) with pTHAAD restored NAD(H)-dependent butanol dehydrogenase activity, NAD(H)-dependent butyraldehyde dehydrogenase activity and butanol production during solventogenic growth. The development of an alternative selectable marker makes it is possible to overexpress genes, via replicative plasmids, in mutant strains that lack specific enzyme activities, thereby expanding the number of possible genetic manipulations that can be performed in C. acetobutylicum. Copyright 1998 John Wiley & Sons, Inc.     

Metabolic engineering of Clostridium acetobutylicum ATCC 824 for the high-yield production of a biofuel composed of an isopropanol/butanol/ethanol mixture

Clostridium acetobutylicum was metabolically engineered to produce a biofuel consisting of an isopropanol/butanol/ethanol mixture. For this purpose, different synthetic isopropanol operons were constructed and introduced on plasmids in a butyrate minus mutant strain (C. acetobutylicum ATCC 824 Δcac15ΔuppΔbuk). The best strain expressing the isopropanol operon from the thl promoter was selected from batch experiments at pH 5. By further optimizing the pH of the culture, a biofuel mixture with almost no by-products was produced at a titer, a yield and productivity never reached before, opening the opportunities to develop an industrial process for alternative biofuels with Clostridial species. Furthermore, by performing in vivo and in vitro flux analysis of the synthetic isopropanol pathway, this flux was identified to be limited by the [acetate]_int and the high Km of CoA-transferase for acetate. Decreasing the Km of this enzyme using a protein engineering approach would be a good target for improving isopropanol production and avoiding acetate accumulation in the culture medium.     

Impact of pH and butyric acid on butanol production during batch fermentation using a new local isolate of Clostridium acetobutylicum YM1

The effect of pH and butyric acid supplementation on the production of butanol by a new local isolate of Clostridium acetobutylicum YM1 during batch culture fermentation was investigated. The results showed that pH had a significant effect on bacterial growth and butanol yield and productivity. The optimal initial pH that maximized butanol production was pH 6.0 ± 0.2. Controlled pH was found to be unsuitable for butanol production in strain YM1, while the uncontrolled pH condition with an initial pH of 6.0 ± 0.2 was suitable for bacterial growth, butanol yield and productivity. The maximum butanol concentration of 13.5 ± 1.42 g/L was obtained from cultures grown under the uncontrolled pH condition, resulting in a butanol yield (Y_P/S) and productivity of 0.27 g/g and 0.188 g/L h, respectively. Supplementation of the pH-controlled cultures with 4.0 g/L butyric acid did not improve butanol production; however, supplementation of the uncontrolled pH cultures resulted in high butanol concentrations, yield and productivity (16.50 ± 0.8 g/L, 0.345 g/g and 0.163 g/L h, respectively). pH influenced the activity of NADH-dependent butanol dehydrogenase, with the highest activity obtained under the uncontrolled pH condition. This study revealed that pH is a very important factor in butanol fermentation by C. acetobutylicum YM1.     

Diversity of moxifloxacin resistance during a nosocomial outbreak of a predominantly ribotype ARU 027 Clostridium difficile diarrhea

To characterize the extent and diversity of moxifloxacin resistance among Clostridium difficile isolates recovered during a predominantly Anaerobe Reference Unit (ARU) ribotype 027-associated nosocomial outbreak of antibiotic associated diarrhea we measured the susceptibility of 34 field isolates and 6 laboratory strains of C. difficile to moxifloxacin. We ribotyped the isolates as well as assaying them by PCR for the metabolic gene, gdh, and the virulence genes, tcdA, tcdB, tcdC, cdtA and cdtB. All the laboratory isolates, including the historical ARU 027 isolate Cd196, were susceptible to moxifloxacin (≤2 μg/mL). 13 field isolates were susceptible to ≤2 μg/mL. Five were resistant to from 4 to 12 μg/mL (moderate resistance); 16 were resistant to ≥16 μg/mL (high resistance). We sequenced the quinolone resistance determining regions of gyrA (position 71-460) and gyrB (position 1059-1448) from two susceptible laboratory strains, all five isolates with moderate resistance and two highly resistant isolates. Two highly resistant isolates (Pitt 40, ribotype ARU 027 and Pitt 33, ribotype ARU 001) had the same C245T (Thr₈₂ΔIle) mutation. No other changes were seen. Amplification with primer pairs specific for the C245T mutant gyrA and for the wild type gene respectively confirmed all 16 highly resistant ARU 027 isolates, as well as the highly resistant isolates from other ribotypes, had the C245T mutation and that the mutation was absent from all other isolates. Among the five isolates with moderate resistance we found combinations of mutations within gyrA (T128A, Val₄₃ΔAsp and G349T, Ala₁₁₇ΔSer) and gyrB (G1276A, Arg₄₂₆ΔAsn). The G1396A (Glu₄₆₆ΔLys) mutation was not associated with increased resistance.     

Efficient production of 2,3-butanediol in Saccharomyces cerevisiae by eliminating ethanol and glycerol production and redox rebalancing

2,3-Butanediol is a promising valuable chemical that can be used in various areas as a liquid fuel and a platform chemical. Here, 2,3-butanediol production in Saccharomyces cerevisiae was improved stepwise by eliminating byproduct formation and redox rebalancing. By introducing heterologous 2,3-butanediol biosynthetic pathway and deleting competing pathways producing ethanol and glycerol, metabolic flux was successfully redirected to 2,3-butanediol. In addition, the resulting redox cofactor imbalance was restored by overexpressing water-forming NADH oxidase (NoxE) from Lactococcus lactis. In a flask fed-batch fermentation with optimized conditions, the engineered adh1Δadh2Δadh3Δadh4Δadh5Δgpd1Δgpd2Δ strain overexpressing Bacillus subtilis α-acetolactate synthase (AlsS) and α-acetolactate decarboxylase (AlsD), S. cerevisiae 2,3-butanediol dehydrogenase (Bdh1), and L. lactis NoxE from a single multigene-expression vector produced 72.9 g/L 2,3-butanediol with the highest yield (0.41 g/g glucose) and productivity (1.43 g/(L·h)) ever reported in S. cerevisiae.     

Engineering Clostridium acetobutylicum for production of kerosene and diesel blendstock precursors

Processes for the biotechnological production of kerosene and diesel blendstocks are often economically unattractive due to low yields and product titers. Recently, Clostridium acetobutylicum fermentation products acetone, butanol, and ethanol (ABE) were shown to serve as precursors for catalytic upgrading to higher chain-length molecules that can be used as fuel substitutes. To produce suitable kerosene and diesel blendstocks, the butanol:acetone ratio of fermentation products needs to be increased to 2–2.5:1, while ethanol production is minimized. Here we show that the overexpression of selected proteins changes the ratio of ABE products relative to the wild type ATCC 824 strain. Overexpression of the native alcohol/aldehyde dehydrogenase (AAD) has been reported to primarily increase ethanol formation in C. acetobutylicum. We found that overexpression of the AAD^D485G variant increased ethanol titers by 294%. Catalytic upgrading of the 824(aad^D485G) ABE products resulted in a blend with nearly 50 wt%≤C₉ products, which are unsuitable for diesel. To selectively increase butanol production, C. beijerinckii aldehyde dehydrogenase and C. ljungdhalii butanol dehydrogenase were co-expressed (strain designate 824(Cb ald-Cl bdh)), which increased butanol titers by 27% to 16.9 g L⁻¹ while acetone and ethanol titers remained essentially unaffected. The solvent ratio from 824(Cb ald-Cl bdh) resulted in more than 80 wt% of catalysis products having a carbon chain length≥C₁₁ which amounts to 9.8 g L⁻¹ of products suitable as kerosene or diesel blendstock based on fermentation volume. To further increase solvent production, we investigated expression of both native and heterologous chaperones in C. acetobutylicum. Expression of a heat shock protein (HSP33) from Bacillus psychrosaccharolyticus increased the total solvent titer by 22%. Co-expression of HSP33 and aldehyde/butanol dehydrogenases further increased ABE formation as well as acetone and butanol yields. HSP33 was identified as the first heterologous chaperone that significantly increases solvent titers above wild type C. acetobutylicum levels, which can be combined with metabolic engineering to further increase solvent production.     

Lipase in biphasic alginate beads as a biocatalyst for esterification of butyric acid and butanol in aqueous media

Esterification of organic acids and alcohols in aqueous media is very inefficient due to thermodynamic constraints. However, fermentation processes used to produce organic acids and alcohols are often conducted in aqueous media. To produce esters in aqueous media, biphasic alginate beads with immobilized lipase are developed for in situ esterification of butanol and butyric acid. The biphasic beads contain a solid matrix of calcium alginate and hexadecane together with 5 mg/mL of lipase as the biocatalyst. Hexadecane in the biphasic beads serves as an organic phase to facilitate the esterification reaction. Under optimized conditions, the beads are able to catalyze the production of 0.16 mmol of butyl butyrate from 0.5 mmol of butyric acid and 1.5 mmol of butanol. In contrast, when monophasic beads (without hexadecane) are used, only trace amount of butyl butyrate is produced. One main application of biphasic beads is in simultaneous fermentation and esterification (SFE) because the organic phase inside the beads is very stable and does not leach out into the culture medium. SFE is successfully conducted with an esterification yield of 6.32% using biphasic beads containing iso-octane even though the solvent is proven toxic to the butanol-producing Clostridium spp.     

Metabolic engineering of Saccharomyces cerevisiae for the biotechnological production of succinic acid

The production of bio-based succinic acid is receiving great attention, and several predominantly prokaryotic organisms have been evaluated for this purpose. In this study we report on the suitability of the highly acid- and osmotolerant yeast Saccharomyces cerevisiae as a succinic acid production host. We implemented a metabolic engineering strategy for the oxidative production of succinic acid in yeast by deletion of the genes SDH1, SDH2, IDH1 and IDP1. The engineered strains harbor a TCA cycle that is completely interrupted after the intermediates isocitrate and succinate. The strains show no serious growth constraints on glucose. In glucose-grown shake flask cultures, the quadruple deletion strain Δsdh1Δsdh2Δidh1Δidp1 produces succinic acid at a titer of 3.62 g L^?1 (factor 4.8 compared to wild-type) at a yield of 0.11 mol (mol glucose)^?1. Succinic acid is not accumulated intracellularly. This makes the yeast S. cerevisiae a suitable and promising candidate for the biotechnological production of succinic acid on an industrial scale.     

A two-step enzymatic resolution of glycidyl butyrate

A two-step enzymatic resolution process for production of (R)- and (S)-glycidyl butyrate was investigated and the lipases were screened. The first step involved a hydrolysis of (R,S)-glycidyl butyrate catalyzed by porcine pancreatic lipase (S-favored) with an E of 21 for production of (R)-glycidyl butyrate (13.2 mmol, 98% ee, 36% yield) under the optimal conditions (pH 7.4, 30 °C, 30 mg/ml CTAB). Then, the recovered (R)-enriched glycidol (19.8 mmol, 65% ee, 56% yield) was used for transesterification catalyzed by Novozym 435 (R-favored) with an E of 69 to obtain (S)-glycidyl butyrate (15.1 mmol, 98% ee, 42% yield) under the optimum conditions (a_W = 0.24, n-heptane, 80 min).     

Synthesis of short chain alkyl esters using cutinase from Burkholderia cepacia NRRL B2320

Short chain alkyl esters are well appreciated for fruity flavors they provide. These are mainly applied to the fruit-flavored products like jam, jelly, beverages, wine and dairy. Cutinase from Burkholderia cepacia NRRL B 2320 was found to be active in catalyzing the synthesis of alkyl esters in organic solvent. The optimal temperature range for the enzyme catalyzed synthesis was found to be from 35 °C to 40 °C. The maximum conversion (%) during synthesis of ester was obtained for butyric acid (C4) and valeric acid (C5) with butanol reflecting the specificity of the enzyme for short-chain length fatty acids. In case of alcohol specificity, butanol was found to be most preferred substrate by the enzyme and conversion (%) decreased with increasing carbon chain length of alcohol used in the esterification reaction. The kinetic analysis for the synthesis of butyl butyrate by varying concentration of one substrate at a time (butanol or butyric acid), showed that Ping–Pong Bi Bi model with acid inhibition and influence of initial water is most suitable model for the prediction of the reaction kinetics.     

The Ccz1 mediates the autophagic clearance of damaged mitochondria in response to oxidative stress in Candida albicans

Autophagy plays a critical role in response to numerous cellular stresses, such as nutrient deprivation, hypoxia, starvation and organelle damage. The disruption of autophagy pathway affects multiple aspects of cellular stress response. Here we for the first time identified Ccz1 as an essential component for autophagy in Candida albicans. Our experiments demonstrated that loss of CCZ1 gene led to vacuolar fragmentation and disruption of the autophagy pathway. Our results also suggested that Ccz1 functioned in oxidative stress. In the ccz1Δ/Δ mutant, the levels of reactive oxidative species (ROS) sharply increased under H₂O₂ treatment. Further studies demonstrated that breakdown of the autophagic clearance pathway led to the accumulation of oxidative stress-damaged mitochondria, and consequently elevated cellular ROS levels in the ccz1Δ/Δ mutant. Furthermore, deletion of CCZ1 led to a significant defect in filamentous development at both 30 °C and 37 °C. The disruption of CCZ1 gene led to decreased capacity of macrophage killing and increased sensitivity to the macrophages. In addition, the ccz1Δ/Δ mutant exhibited attenuated virulence and decreased fungal burdens in the mouse systemic infection model, indicating that CCZ1 might provide a promising target for antifungal drugs development. In summary, our findings provide new insights into the understanding of autophagy-related gene in C. albicans.