Stabilizing hyperactivated lecitase structures through physical treatment with ionic polymers

Lecitase Ultra has been covalently immobilized on cyanogen bromide cross-linked 4% agarose (CNBr) beads, maintaining 70% of the initial activity. The activity of the immobilized enzyme was improved in the presence of Triton X-100, sodium dodecyl sulfate (SDS), and cetyltrimethyl ammonium bromide (CTAB) (e.g., up to 800% when using CTAB). However, CTAB and Triton X-100 presented a negative effect on enzyme stability even at low concentrations, and SDS cannot be used for a long time at 1% concentration. To maintain the hyperactivated conformation of the enzyme in the absence of detergent, ionic polymers were added during incubation of the immobilized enzyme in the presence of detergents. Coating the immobilized enzyme with polyethylenimine in aqueous buffer (PEI) produced a 3-fold increase in enzyme activity. However, in the presence of 0.1% SDS (v/v), this coating produced a 50-fold increase in enzyme activity. Using PEI and 0.01% (v/v) CTAB, the Lecitase activity decreased to 10%. Using irreversible inhibitors, it could be shown that the PEI/SDS-CNBr-Lecitase preparation allowed its catalytic Ser to be more accessible to the reaction medium than the unmodified CNBr-Lecitase.     

Removal of bound Triton X-100 from purified bovine heart cytochrome bc1

Cytochrome bc₁ isolated from Triton X-100-solubilized mitochondrial membranes contains up to 120 nmol of Triton X-100 bound per nanomole of the enzyme. Purified cytochrome bc₁ is fully active; however, protein-bound Triton X-100 significantly interferes with structural studies of the enzyme. Removal of Triton X-100 bound to bovine cytochrome bc₁ was accomplished by incubation with Bio-Beads SM-2 in the presence of sodium cholate. Sodium cholate is critical because it does not interfere with the adsorption of protein on the hydrophobic surface of the beads. The resulting Triton X-100-free cytochrome bc₁ retained nearly full activity, absorption spectra, subunit, and phospholipid composition.     

Purification and properties of phosphatidic acid phosphatase from porcine thymus membranes.

We purified phosphatidic acid phosphatase (EC 3.1.3.4) 2300-fold from porcine thymus membranes. The enzyme was solubilized with beta-octyl glucoside and Triton X-100 and fractionated with ammonium sulfate. The purification was then achieved by chromatography in the presence of Triton X-100 with Sephacryl S-300, hydroxylapatite, heparin-Sepharose, and Affi-Gel Blue. The final enzyme preparation gave a single band of M(r) = 83,000 on sodium dodecyl sulfate-polyacrylamide gel electrophoresis under reducing and nonreducing conditions. The native enzyme, on the other hand, was eluted at M(r) = 218,000 in gel filtration chromatography with Superose 12 in the presence of Triton X-100. The enzyme was judged to be specific to phosphatidic acid, since excess amounts of dicetylphosphate or lysophosphatidic acid did not inhibit the enzyme activity. In this respect, the enzyme was inhibited by 1,2-diacylglycerol but not by 1- or 2-monoacylglycerol and triacylglycerol. The enzyme required Triton X-100 or deoxycholate for its activity. Although the enzyme appeared to be an integral membrane protein, we could not detect its phospholipid dependencies. The activity was independent of Mg2+, and other cations were strongly inhibitory. The specific enzyme activity was 15 mumol/min/mg of protein when assayed using phosphatidic acid as Triton X-100 mixed micelles. The Km for the surface concentration of phosphatidic acid was 0.30 mol%. The enzyme was inhibited by sphingosine and chloropromazine, and less potently, by propranolol and NaF. The enzyme was insensitive to thio-reactive reagents like N-ethylmaleimide.     

Purification and characterization of amphiphilic trehalase from rabbit small intestine

Rabbit intestinal trehalase (alpha,alpha-trehalose glucohydrolase, EC 3.2.1.28) was solubilized with Triton X-100 and purified in the presence of EDTA. The purified enzyme was homogeneous on polyacrylamide gel electrophoresis in the presence of Triton X-100 or SDS. It showed amphiphilic properties on gel filtration. polyacrylamide gel electrophoresis, charge-shift electrophoresis and phenyl-Sepharose chromatography. Its molecular weight was estimated to be about 330 000 by gel filtration under nondenaturing conditions and in the presence of Triton X-100, the value being in satisfactory agreement with the sum of the weight of one Triton X-100 micelle and twice the molecular weight (105 000) of purified hydrophilic trehalase which had been deprived of the anchor segment. The two purified trehalases gave almost the same molecular weights (about 75 000) on SDS-polyacrylamide gel electrophoresis. These results suggest that intestinal trehalase consists of two subunits with a molecular weight of 75 000 and that its anchor segment is small (less than 5000). Triton X-100 extracts freshly prepared from intestinal microvilli essentially showed one form of trehalase, which behaved on phenyl-Sepharose and Con A-Sepharose chromatography in the same manner as purified amphiphilic trehalase.     

An automated assay for phosphorylase kinase

A fully automated assay of phosphorylase kinase capable of processing 40 samples/hr is described. Problems due to enzyme adsorbed to the incubation coil and thereby producing a continuous rise of the base line were overcome by washing with a solution containing 0.05% Triton X-100, 0.03% SDS, and 5 mm EDTA. Under these conditions, a linear relationship between phosphorylase kinase concentration in the incubation mixture and absorbancy at pH's 6.8 and 8.2 is obtained when 1% glycogen is present in the reaction mixture.Inclusion of glycogen allows reduction of the concentration of phosphorylase in the incubation mixture. Due to the presence of Triton X-100 in this test, the carbohydrate acts like an allosteric activator of phosphorylase kinase. The standard deviation of the automated kinase test is 1.3% lower than that of the manual test.     

Effects of Triton X-100 concentration and incubation temperature on carboxyfluorescein release from multilamellar liposomes

Carboxyfluorescein is the most commonly used probe to measure the rate of release of vesicle contents. The validity of the data obtained by this method depends on obtaining an end point based on the complete release of the dye on treatment of the liposomes with a detergent, usually Triton X-100. However, Triton does not completely release entrapped carboxyfluorescein from multilamellar liposomes and the amount and rate of release of marker upon detergent treatment is a function of lipid composition of the liposome, Triton concentration and temperature and duration of detergent incubation. The fluorescence ‘end point’ for distearoyl-l-α-phosphatidylcholine/cholesterol (2:1, mol%) multilamellar liposomes treated with 0.5% Triton at 22°C (a condition often used) is only about one-fifth the value for liposomes treated with 5% Triton at 72°C. The conditions of treatment appear to affect the release of carboxyfluorescein from the lipid of the partially or completely disrupted liposome and the subsequent partitioning of the free dye into the aqueous phase. This effect can lead to serious errors in the interpretation of multilamellar liposome stability data. However, Triton allows complete release of entrapped dye from small unilamellar vesicles under all conditions tested.     

Stabilization of the hexameric glutamate dehydrogenase from Escherichia coli by cations and polyethyleneimine

The enzyme glutamate dehydrogenase (GDH) from Escherichia coli is a hexameric protein. The stability of this enzyme was increased in the presence of Li⁺ in concentrations ranging from 1 to 10 mM, 1 M of sodium phosphate, or 1 M ammonium sulfate. A very significant dependence of the enzyme stability on protein concentration was found, suggesting that subunit dissociation could be the first step of GDH inactivation. This effect of enzyme concentration on its stability was not significantly decreased by the presence of 10 mM Li⁺. Subunit crosslinking could not be performed using neither dextran nor glutaraldehyde because both reagents readily inactivated GDH. Thus, they were discarded as crosslinking reagents and GDH was incubated in the presence of polyethyleneimine (PEI) with the aim of physically crosslinking the enzyme subunits. This incubation does not have a significant effect on enzyme activity. However, after optimization, the PEI-GDH was found to almost maintain the full initial activity after 2 h under conditions where the untreated enzyme retained only 20% of the initial activity, and the effect of the enzyme concentration on enzyme stability almost disappeared. This stabilization was maintained in the pH range 5–9, but it was lost at high ionic strength. This PEI-GDH composite was also much more stable than the unmodified enzyme in stirred systems. The results suggested that a real adsorption of the PEI on the GDH surface was required to obtain this stabilizing effect. A positive effect of Li⁺ on enzyme stability was maintained after enzyme surface coating with PEI, suggesting that the effects of both stabilizing agents could not be exactly based on the same mechanism. Thus, the coating of GDH surface with PEI seems to be a good alternative to have a stabilized and soluble composite of the enzyme.     

Kinetic study of the colloidal and enzymatic stability of β-galactosidase,for designing its encapsulation route through sol–gel route assisted by Triton X-100 surfactant

The kinetic study of the colloidal and enzymatic stability for the β-galactosidase of Bacillus circulans was carried out in function of the presence of Triton X-100 surfactant, under orbital agitation and varying the pH and temperature. The correlation between the Dynamic Light Scattering and enzyme assay data, supported by z-potential and Differential Scanning Calorimetry analyses, gave insights about the mechanism of the protective role of the surfactant against the enzyme deactivation during its incubation. The best conditions for preserving the enzymatic activity, under orbital agitation, were: presence of 1 × 10⁻³M Triton X-100, at pH 6.0 and 25 °C or 40 °C during less than 24 h, even in the presence of 0.1 M sodium cations or 4% ethanol. As these conditions also affect the polycondensation of the siliceous species and the enzyme-silica interactions, these could be considered as primary information for designing and optimizing an encapsulation route of β-galactosidase in silica, by a sol–gel process assisted by surfactant.     

Solubilization, purification, and characterization of succinate dehydrogenase from membranes of Mycobacterium phlei.

Succinate dehydrogenase (SDH) was solubilized from membranes of Mycobacterium phlei by Triton X-100 with a recovery of about 90%. The solubilized SDH was purified about 90-fold by Sephacryl S-300, DEAE-cellulose, hydroxylapatite, and isoelectric focusing in the presence of Triton X-100 with a 20% recovery. SDH was homogeneous, as determined by polyacrylamide gel electrophoresis in nondenaturing gels containing Triton X-100. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis of the enzyme revealed two subunits with molecular weights of 62,000 and 26,000. SDH is a flavoprotein containing 1 mol of flavin adenine dinucleotide, 7 to 8 mol of nonheme iron, and 7 to 8 mol of acid-labile sulfide per mol of protein. Using phenazine methosulfate and 2,6-dichloroindophenol as electron acceptors, the enzyme had an apparent Km of 0.12 mM succinate. SDH exhibited a sigmoidal relationship of rate to succinate concentration, indicating cooperativity. The enzyme was competitively inhibited by fumarate with a Ki of 0.15 mM. In the absence of Triton X-100, the enzyme aggregated, retained 50% of the activity, and could be resolubilized with Triton X-100 with full restoration of activity. Cardiolipin had no effect on the enzyme activity in the absence of Triton X-100, but it stimulated the activity by about 30% in the presence of 0.1% Triton X-100 in the assay mixture. Menaquinone-9(2H), isolated from M. phlei, had no effect on the enzyme activity either in the presence or absence of Triton X-100.     

Characteristics of lysosomes in the rat placental cells

Six acid hydrolases, cytochrome oxidase, and alkaline phosphatase were demonstrated in 0.25 m sucrose homogenates of rat chorioallantoic placenta. The acid hydrolases were: acid phosphatase, β-glucuronidase, N-acetyl-β-glucosaminidase, β-galactosidase, and acid deoxyribonuclease, showing optimum activity near pH 4.5; cathepsin, with optimum activity near pH 3.6. The free acid hydrolases present in cytoplasmic extracts expressed 20–40% of their total activity. “Total” activity was defined as the enzyme activity observed in the presence of Triton X-100, while “free” activity denoted enzyme activity measured under similar assay conditions except in the presence of sucrose and absence of Triton X-100. The decreased activity or latency in the assays for the free activity of acid phosphatase, acid deoxyribonuclease, and cathepsin persisted after incubation at pH 5 and 37 ° up to an hour. In contrast, this latency did not persist after incubation of the β-glycosidases. Additionally, the free activity of all the designated enzymes of the cytoplasmic extract was in excess of the nonsedimentable activity observed.     

Control of autolysis of Bacillus subtilis for selective production of the intracellular enzyme glucose-6-phosphate dehydrogenase in aqueous two-phase systems

A method for the release of intracellular enzyme by autolysis of Bacillus subtilis cells is presented. Both the growth and lysis processes were further applied to aqueous two-phase systems (ATPS). Lysis induced by the addition of Triton X-100 and by low-temperature treatment facilitated the release of cytoplasmic enzyme glucose-6-phosphate dehydrogenase (G6PDH) in ATPS. The release selectivity increased when lysis was regulated by the addition of 50 μM or 100 μM Triton X-100. Cardiolipin efficiently inhibited the autolytic process. Control of the autolytic system promoted the selective release of G6PDH. B. subtilis cells could be grown and lysed in aqueous two-phase systems in a similar fashion to the conventional single-phase medium solutions. The released enzymes were partitioned according to their surface properties. G6PDH were extracted to the top phase in a PEG1540/Dex100K-200K sytem. Cells were partitioned to the bottom phase or the interface, and could be recycled into the fermentor. The selectivity of enzyme production was also increased in two-phase systems by the addition of cardiolipin.     

Alkaline treatment of muscle microsomes releases amphiphilic and hydrophilic forms of acetylcholinesterase.

To obtain information about the mode of attachment of amphiphilic monomers of acetylcholinesterase (AChE) in sarcoplasmic reticulum (SR) of skeletal muscle, attempts were made to release the enzyme by alkaline hydroxylamine. About half of the activity measured in microsomes preincubated with 0.5% (w/v) Triton X-100 is detached by incubation of SR with bicarbonate buffer (pH 10.5). Addition of 1 M hydroxylamine to the alkaline buffer did not improve enzyme solubilization. Molecular forms of 16S (A12), 10.5S (G4) and 4.0S (G1) are separated by sedimentation analyses of Triton X-100 or bicarbonate-solubilized AChE. Monomeric AChE, released under alkaline conditions (G1A), displays amphiphilic properties. G1A, but not G4 and A12, forms are retained in a phenyl-Sepharose column and this allows its separation from hydrophilic forms. Isolated monomers extracted with Triton X-100 (G1D) or alkaline buffer showed identical kinetic behaviour. The two forms reacted with lectins in a similar manner. However, thermal inactivation experiments revealed that about 90 and 40% of the activity in the G1D and G1A forms were lost by heating at 50 degrees C, following the same rate constant (k = 0.130 min-1). Addition of Triton X-100 to the G1A form leads to an increase of its thermal sensitivity, the enzyme being fully inactivated very rapidly (k = 0.230 min-1). The results suggest that the hydrophobic moiety of the enzyme might be exposed or hidden depending on the environmental hydrophobicity. Changes in the composition of the solvent will determine the final conformational state of the protein.     

Diacylglycerol kinase from suspension cultured plant cells : purification and properties

Diacylglycerol kinase (ATP:1,2-diacylglycerol 3-phosphotransferase, EC 2.7.1.107) from suspension-cultured Catharanthus roseus cells was extracted from a membrane fraction with 0.6% Triton X-100 and 150 millimolar NaCl and was purified about 900-fold by DEAE-cellulose, blue Sepharose, gel permeation, and phenyl-Sepharose chromatography. The enzyme is obviously membrane bound as activity in the cytosol could not be detected. In the presence of detergents such as Triton X-100 (3-[3-cholamidopropyl]dimethylamino)-1-propanesulfonate (Chaps), or deoxycholate, a molecular weight of about 250,000 was determined by gel filtration. In glycerol density gradients, the enzyme sedimented slightly more slowly than bovine serum albumin, indicating a molecular weight of less than 68,000. On sodium dodecyl sulfate-polyacrylamide gel electrophoresis enzyme activity could be assigned to a protein of 51,000 daltons. As found previously for bacterial and animal diacylglycerol kinases, the purified enzyme was completely devoid of activity without the addition of phospholipids or deoxycholate. Cardiolipin was found to be most effective, whereas higher amounts of detergent were inhibitory. The enzyme needs divalent cations for activity, with Mg²⁺ ions being the most effective. Apparent K_m values for ATP and diacylglycerol were determined as 100 and 250 micromolar, respectively.     

Reactivation of covalently immobilized lipase from Thermomyces lanuginosus

Lipase from Thermomyces lanuginosus (TLL) immobilized on cyanogen bromide agarose (CNBr) may be fully inactivated when incubated in saturated solutions of guanidine. When this inactivated enzyme is re-incubated in aqueous medium, 20% of the activity may be recovered for several cycles. However, if the activity was determined in the presence of a detergent (CTAB, an activator of this enzyme), 100% of the initial activity in the presence of detergent was recovered. The enzyme was also inactivated in the presence of organic solvents and at high temperatures. Inactivations were more rapid when the activity was determined in absence of detergent. In both cases, some activity could be recovered just by incubation under mild conditions, and this increase was higher if the activity measurements were performed in the presence of CTAB. These results suggested that the opening of the lipase could be a critical step in the inactivation or reactivation of immobilized TLL. In inactivations in the presence of solvents, 100% of activity could be recovered during several cycles, while in thermal inactivations, the recovered activity decreased in each inactivation–reactivation cycle. The incubation of the enzyme inactivated by temperature in guanidine improved the results, but still 100% could not be achieved during several cycles even measured in the presence of CTAB.Thus, the simple incubation of the partially or fully inactivated enzyme under mild conditions permitted to recover some activity (enhancing the half life of the biocatalysts), even in thermal inactivations.     

Interactions of pig brain cytosolic sialidase with gangliosides. The formation of catalytically inactive enzyme-ganglioside complexes requires homogeneous ganglioside micelles and is a reversible phenomenon

Cytosolic sialidase A, obtained from pig brain and purified, interacts with ganglioside GT1b giving two catalytically inactive enzyme-ganglioside complexes. Treatment of these complexes with Triton X-100 under given conditions (1% detergent; 1 h at 37 degrees C; 0.1 M acetic acid-sodium acetate buffer, pH 4.8) leads to the liberation of part of the enzyme (about 47%) in a free and fully active form. Reversible inactivation of cytosolic sialidase requires the presence of homogeneous micelles of GT1b or of mixed micelles (for instance Triton X-100 and GT1b) with a high GT1b content. Triton X-100/ganglioside mixed micelles with a molar ratio above 50, as well as small unilamellar vesicles of egg yolk lecithin and GT1b (7-15 mol%), did not inactivate the enzyme at all; on the contrary these forms of ganglioside dispersion behaved as excellent substrates for the enzyme. It is to be concluded that under in vitro conditions the ability of ganglioside to interact with cytosolic sialidase, giving rise to catalytically inactive complexes or to Michaelis-Menten enzyme-substrate complexes, depends on the supramolecular organization of the ganglioside molecules. Arrangements of tightly packed molecules with strong side-side interactions facilitate the formation of complexes with the enzyme; arrangement with separated and loosely interacting molecules facilitates binding at the catalytically active site of the enzyme.     

Immobilization in the presence of Triton X-100: modifications in activity and thermostability of <Emphasis Type="Italic">Geobacillus thermoleovorans</Emphasis> CCR11 lipase

A partially purified lipase produced by the thermophile Geobacillus thermoleovorans CCR11 was immobilized by adsorption on porous polypropylene (Accurel EP-100) in the presence and absence of 0.1% Triton X-100. Lipase production was induced in a 2.5% high oleic safflower oil medium and the enzyme was partially purified by diafiltration (co. 500,000 Da). Immobilization conditions were established at 25 °C, pH 6, and a protein concentration of 0.9 mg/mL in the presence and absence of 0.1% Triton X-100. Immobilization increased enzyme thermostability but there was no change in neither the optimum pH nor in pH resistance irrelevant to the presence of the detergent during immobilization. Immobilization with or without Triton X-100 allowed the reuse of the lipase preparation for 11 and 8 cycles, respectively. There was a significant difference between residual activity of immobilized and soluble enzyme after 36 days of storage at 4 °C (P < 0.05). With respect to chain length specificity, the immobilized lipase showed less activity over short chain esters than the soluble lipase. The immobilized lipase showed good resistance to desorption with phosphate buffer and NaCl; minor loses with detergents were observed (less than 50% with Triton X-100 and Tween-80), but activity was completely lost with SDS. Immobilization of G. thermoleovorans CCR11 lipase in porous polypropylene is a simple and easy method to obtain a biocatalyst with increased stability, improved performance, with the possibility for re-use, and therefore an interesting potential use in commercial conditions.     

Determination of lysosome membrane stability]

Effect of different concentration of non-ionic detergents (Triton X-100, Triton X-305, BRIJ-35 and Triton WR-1339) on total and non-sedimentable activity of 8 rat liver lysosome enzymes (acid phosphatase, acid DNase, acid RNase, arylsulphatases A and B, beta-glucuronidase, beta-galactosidase, beta-glucosidase and beta-acetylglucosaminidase) was studied. Only Triton X-100 at the concentration of 0.1% (and higher) was found to release completely lysosome enzymes. Low concentrations of Triton X-100 (0.025-0.05%) were used to characterize the strength of enzyme binding: the level of releasing acid DNase, beta-galactosidase, beta-glucuronidase and acid phsophatase being considerably higher than that of other lysosome enzymes studied. On the basis of the data obtained a method is worked out, which is suitable for series studies of the stability of lysosome membranes under different physiological and pathological conditions. The essence of the method is the treatment of membrane particles with increasing concentrations of Triton X-100 (0.025; 0.05 AND 0.1%) AND THE SUCCESSIVE ESTIMATION OF NON-Sedimentable activity of marker enzymes. The method detected troubles in the stability of rat liver lysosome membranes under starvation, protein deficiency and aging.     

Use of resistant mutants to study the interaction of triton X-100 with Staphylococcus aureus.

Staphylococcus aureus mutants resistant to the nonionic detergent Triton X-100, isolated from the wild-type strain H and the autolysin-deficient strain RUS3, could grow and divide in broth containing 5% (vol/vol) Triton X-100, while growth of the parental strains was markedly inhibited above the critical micellar concentration (0.02%) of the detergent. Growth-inhibitory concentrations of Triton X-100 killed wild-type cells without demonstrable cellular lysis. Triton X-100 stimulated autolysin activity of S. aureus cells under nongrowing conditions, and this lytic response was markedly reduced in energy-poisoned cells. In contrast, the detergent had no effect on the activity of autolysins in cell-free systems, and growth in the presence of Triton X-100 did not alter either the cellular autolysin activity or the susceptibility of cell walls to exogenous lytic enzymes. Treatment with either Triton X-100 or penicillin G in the growth medium stimulated release of predominantly acylated intracellular lipoteichoic acid and sensitized staphylococci to Triton X-100-induced autolysis. There was no significant difference in the cell wall and membrane compositions or Triton X-100 binding between the parental strains and the resistant mutants. The resistant mutant TXR1, derived from S. aureus H, had a higher level of L-alpha-glycerophosphate dehydrogenase activity, and its oxygen uptake was more resistant to inhibition by a submicellar concentration (0.008%) of Triton X-100. Growth in the presence of subinhibitory concentrations of Triton X-100 rendered S. aureus H cells phenotypically resistant to the detergent and greatly stimulated the level of oxygen uptake. Membranes isolated from such cells exhibited enhanced activity of the respiratory enzymes succinic dehydrogenase and L-alpha-glycerophosphate dehydrogenase.     

Partial characterization and inactivation of membrane-bound phosphofructokinase from Tetrahymena pyriformis

In Tetrahymena pyriformis, 6-phosphofructokinase (ATP:D-fructose-6-phosphate 1-phosphotransferase, EC 2.7.1.11) is membrane-bound. Enzyme activity is solubilized by treatment of membranes with Triton X-100 or by high ionic strength in the presence of a chelator. The solubilized enzyme has an approximate molecular weight of 300 000. Both the membrane-bound enzyme and the solubilized enzyme exhibit maximum activity over a wide pH range. At low pH, the membrane-bound form of the enzyme is irreversibly inactivated, whereas the solubilized enzyme is not. The membrane-bound enzyme is inactivated by incubation with Mg2+, ATP, fluoride and a soluble factor that is heat labile, nondialysis, (NH4)2SO4 precipitable and sensitive to trypsin. The solubilized enzyme is not inactivated under similar conditions.     

The effect of the interdependence of protein and bile salt concentrations on the measurement of cerebroside sulphate sulphatase activity in human leucocyte and fibroblast extracts

The previously observed differences in properties of human leucocyte and fibroblast cerebroside sulphate sulphatase (cerebroside-3-sulphate 3-sulphohydrolase, EC 3.1.6.8) measured in vitro have been found to be due to subtle differences in incubation conditions. Maximum enzyme activity was observed with either crude sodium taurocholate or with pure sodium taurodeoxycholate. The optimum bile salt concentration of the enzyme in leucocyte or fibroblast extracts, but not the pure ox liver enzyme, was critically dependent on protein concentration. At low concentrations of the latter (less than 0.1 mg/ml), maximum activity was observed at taurocholate concentrations less than 0.5 mg/ml; at protein concentrations greater than 0.20 mg/ml substantially more bile acid (more than 1.3 mg/ml) was required to stimulate maximum activity. Addition of Triton X-100 or bovine serum albumin to the incubation mixtures increased the optimum taurocholate concentration. The dependence of the bile salt optimum on protein concentration appears to be related to the binding of the lipid substrate to membranous protein present in the tissue extracts. Release of the bound lipid is effected either by increasing the bile salt concentration or by adding Triton X-100. In the presence of excess bile salt human leucocyte, fibroblast and liver cerebroside sulphate sulphatase activity is stimulated by Triton at low protein concentrations; under identical conditions the pure or crude ox-liver enzyme is substatially inhibited. Our data also show that cerebroside sulphate sulphatase activity measured in extracts from leucocytes and fibroblasts, the tissues normally used to effect a diagnosis of metachromatic leucodystrophy, is the result of a complex interaction of bile salt, protein, Triton X-100 and probably the substrate itself. Any slight alteration in any of those factors, without a corresponding change in any or all of the others, can have a marked effect on the measured enzyme activity, and may lead to errors in the diagnosis of metachromatic leucodystrophy.