In situ non-invasive spectral discrimination between bone cell phenotypes used in tissue engineering

Raman micro-spectroscopy was used to discriminate between different types of bone cells commonly used in tissue engineering of bone, with the aim of developing a method of phenotypic identification and classification. Three types of bone cells were analysed: human primary osteoblasts (HOB), retroviral transfected human alveolar bone cells with SV40 large T antigen (SV40 AB), and osteoblast-like human osteosarcoma derived MG63 cell line. Unsupervised principal component analysis (PCA) and linear discriminant analysis (LDA) of the Raman spectra succeeded in discriminating the osteosarcoma derived MG63 cells from the non-tumour cells (HOB and SV40 AB). No significant differences were observed between the Raman spectra of the HOB and SV40 AB cells, confirming the biochemical similarities between the two cell types. Difference spectra between tumour and non-tumour cells suggested that the spectral discrimination is based on the fact that MG63 osteosarcoma derived cells are characterised by lower concentrations of nucleic acids and higher relative concentrations of proteins compared to the non-tumour bone cells. A supervised classification model (LDA) was built and showed high cross-validation sensitivity (100%) and specificity (95%) for discriminating the MG63 cells and the non-tumour cells, with 96% of the cells being correctly classified either as tumour or non-tumour derived cells. This study proves the feasibility of using Raman spectroscopy to identify in situ phenotypic differences in living cells.     

Evaluation of safety and efficacy of radiation-sterilized bone allografts in reconstructive oral surgery

Bone grafting allows reconstruction of the atrophied or destroyed alveolar process. In orthopaedics and traumatology allogeneic grafting has been used to restore defects of osseous tissue for over 60 years. In order to improve safety of the graft recipient, sterilized allogeneic grafts have been use. The aim of the study was to assess the direct and long-term outcomes following augmentation of atrophied alveolar processes with the use of radiation-sterilized allogeneic bone grafts. Sixty-eight patients were surgically treated between 2004 and 2011: 29 underwent open sinus floor elevation, post-extraction alveoli augmentation was performed in 16 subjects and 23 underwent reconstruction of the atrophied alveolar process. Augmentation of bone defects used bone granulate in 63 patients and bone blocks stabilized with titanium screws in 5 patients. PRF membranes collected from the patient’s blood were also used in all the procedures. In each of the cases optimal dimensions of the alveolar process were obtained allowing embedment of BIOMET 3I dental implant/-s. In all the patients the defects were successfully restored with implant-supported prostheses. Radiation-sterilized allogeneic bone grafts proved to be safe and effective for the patients and manageable for the surgeon constituting a good alternative to autogeneic material.     

Development, characterization and clinical use of a biodegradable composite scaffold for bone engineering in oro-maxillo-facial surgery

We have developed a biodegradable composite scaffold for bone tissue engineering applications with a pore size and interconnecting macroporosity similar to those of human trabecular bone. The scaffold is fabricated by a process of particle leaching and phase inversion from poly(lactideco-glycolide) (PLGA) and two calcium phosphate (CaP) phases both of which are resorbable by osteoclasts; the first a particulate within the polymer structure and the second a thin ubiquitous coating. The 3-5 μm thick osteoconductive surface CaP abrogates the putative foreign body giant cell response to the underlying polymer, while the internal CaP phase provides dimensional stability in an otherwise highly compliant structure. The scaffold may be used as a biomaterial alone, as a carrier for cells or a three-phase drug delivery device. Due to the highly interconnected macroporosity ranging from 81% to 91%, with macropores of 0.8～1.8 mm, and an ability to wick up blood, the scaffold acts as both a clot-retention device and an osteoconductive support for host bone growth. As a cell delivery vehicle, the scaffold can be first seeded with human mesenchymal cells which can then contribute to bone formation in orthotopic implantation sites, as we show in immune-compromised animal hosts. We have also employed this scaffold in both lithomorph and particulate forms in human patients to maintain alveolar bone height following tooth extraction, and augment alveolar bone height through standard sinus lift approaches. We provide a clinical case report of both of these applications; and we show that the scaffold served to regenerate sufficient bone tissue in the wound site to provide a sound foundation for dental implant placement. At the time of writing, such implants have been in occlusal function for periods of up to 3 years in sites regenerated through the use of the scaffold.     

Effect of dolomite on the repair of bone defects in rats: histological study

The aim of the present study was to evaluate histologically and radiographically the tissue response to dolomite [CaMg(CO3)2] and its osteogenic potential in the repair of bone cavities in the calvaria of rats. A bone defect 10 mm in diameter and 1 mm deep was made in the calvaria of male Wistar rats. The defects were filled with dolomite, inorganic bovine bone (positive control), or coagulum (negative control). The animals were euthanized 7, 15, 30, and 60 days after surgery, and specimens were collected for radiographic and microscopic analyses. The bone defects were processed for paraffin embedding and H&E staining. The histological study revealed that dolomite stimulated a moderate inflammatory response, with programmed cell death in the first 15 days, compared to bovine bone which showed a moderate to intense acute response. In the chronic phase, the inflammatory response was characterized by the occurrence of macrophages organized as epithelioid cells in the dolomite group, and giant cells in the bovine-bone group. Fibrosis developed in all three groups; however, encapsulation of the fragments, reabsorption, and osteoconductive activity occurred only in the defects filled with bovine bone. The radiographic analysis showed that the bovine bone was most efficient in the repair of the defects, followed by the dolomite and the coagulum. This study demonstrated that the dolomite stimulated a moderate acute inflammatory response with programmed cell death, and a chronic inflammatory response by means of the phagocytic mononuclear system. Although osteo-conductive activity was not shown, the dolomite favored the repair process, compared to the coagulum group.     

Repair of long-bone pseudoarthrosis with autologous bone marrow mononuclear cells combined with allogenic bone graft

Background aimsLong-bone pseudoarthrosis is a major orthopedic concern because of numerous factors such as difficulty of the treatment, high recurrence, high costs and the devastating effects on the patients' quality of life, which sometimes ends in amputation. Although the “gold standard” for the treatment of this pathology is autologous bone grafting, which has high osteogenic, osteoconductive and osteoinductive properties, this treatment presents some restrictions such as the limited amount of bone that can be taken from the patient and donor site morbidity. Bone marrow mononuclear cells (BM-MNCs) comprise progenitor and stem cells with pro-angiogenic and pro-osteogenic properties. Allogenic cancellous bone graft is a natural and biodegradable osteoconductive and osteoinductive scaffold. Combination of these two components could mimic the advantages of autologous bone grafting while avoiding its main limitations.MethodsLong-bone pseudoarthrosis was treated in seven patients with autologous BM-MNCs from iliac crest combined with frozen allogenic cancellous bone graft obtained from the tissue bank.ResultsAll patients showed complete bone consolidation 5.3 ± 0.9 months (range, 2–9 months) after cell transplantation. Moreover, limb pain disappeared in all of them. The mean follow-up was 35.8 ± 4.6 months after transplantation (range, 24–51 months) without pseudoarthrosis recurrence or pain reappearing.ConclusionsCombination of autologous BM-MNCs and allogenic bone graft could constitute an easy, safe, inexpensive and efficacious attempt to treat long-bone pseudoarthrosis and non-union by reproducing the beneficial properties of autologous bone grafting while restricting its disadvantages.     

OSFE植骨与不植骨种植修复的临床效果对比研究

目的:比较上颌窦挤压内提升(OSFE)植骨与不植骨种植修复的临床效果。方法:选择上颌后牙区种植修复的35例患者,其剩余牙槽嵴高度(RBH)为4~8 mm,共植入43颗种植体。A组16例患者为植骨组,20个种植位点,牙槽骨可用骨高度平均(5.87±1.19)mm,植入人工骨粉后植入种植体;B组19例患者为不植骨组,23个种植位点,缺牙区牙槽骨可用骨高度平均(5.67±1.10)mm,上颌窦提升后直接植入种植体。6个月后行二期手术完成修复。采用临床检查、X线检查及视觉模拟评分法(visual analogue scale,VAS)进行效果评价。结果:两组病例的牙槽嵴高度差异比较无统计学意义。在平均约36.7个月的随访期内,A组种植体的存留率为100%(20/20),B组中有1枚种植体因咬合力过大及口腔卫生较差脱落,种植体的存留率为95.6%(22/23),两组病例的存留率比较无统计学差异。两组患者的VAS值比较亦相当。所有种植体骨结合良好,种植体周围软组织无炎症,种植义齿咀嚼功能良好。结论:在严格控制适应症、准确掌握种植技巧的前提下,RBH在4~8 mm之间的病例无需额外植入骨代替材料即可取得理想的修复效果,简化了手术的操作,减少了手术的风险和创伤,节省了手术的时间和费用,易被患者接受。     

Reciprocal osteoblastic and osteoclastic modulation in co-cultured MG63 osteosarcoma cells and human osteoclast precursors

Osteosarcoma is usually associated with a disturbed bone metabolism. The aim of this work was to characterize the reciprocal interactions between MG63 osteosarcoma cells and osteoclasts, in a co-culture system. Co-cultures were characterized throughout 21 days for the osteoclastogenic response and the expression of osteoblastic markers. Monocultures of MG63 cells and peripheral blood mononuclear cell (PBMC) and co-cultures of PBMC + human bone marrow cells (hBMC) were also performed. Compared to PBMC cultures, co-cultures yielded significantly increased gene expression of osteoclast-related markers, tartarate-acid resistant phosphatase (TRAP) activity, TRAP-positive multinucleated cells, cells with actin rings and vitronectin receptors (VNR) and calcitonin receptors (CTR) and calcium phosphate resorbing ability. Results showed that the development of functional osteoclasts required a very low number of MG63 cells, suggesting a high osteoclastogenic-triggering capacity of this cell line. Subjacent mechanisms involved the pathways MEK and NF-kB, although with a lower relevance than that observed on PBMC monocultures or co-cultures of hBMC + PBMC; PGE2 production also had a contribution. Compared to MG63 cell monocultures, the co-culture expressed lower levels of COL1 and ALP, and higher levels of BMP-2, suggesting that PBMC also modulated the osteoblastic behavior. While M-CSF appeared to be involved in the osteoclastogenic response on the MG63 + PBMC co-cultures, RANKL does not seem to be a key player in the process. On the other hand, sphingosine-1-phosphate production might contribute to the modulation of the osteoblastic behavior. Results suggest that the reciprocal modulation between osteosarcoma and osteoclastic cells might contribute to the disturbed bone metabolism associated with bone tumors.     

Isolation and characterisation of mesenchymal stem cells from adult mouse bone marrow

The future use of adult mesenchymal stem cells (MSCs) for human therapies depends on the establishment of preclinical studies with other mammals such as mouse. Surprisingly, purification and characterisation of murine MSCs were only poorly documented. The aim of this study was to purify mouse MSCs from adult bone marrow and to functionally characterise their abilities to differentiate along diverse lineages. Adherent cells from adult C57Bl/6J mouse bone marrow were depleted of granulo-monocytic cells and subsequently allowed to grow on fibronectin-coated dishes in presence of fetal bovine serum and growth factors. The growing fibroblastoid cell population primarily consisted of spindle- and star-shaped cells with significant renewal capacity as they were cultured until 30 passages (about 60 doubling population). We fully demonstrated the MSC phenotype of these cells by inducing them to differentiate along osteoblastic, adipocytic, and chondrocytic pathways. Mouse MSCs (mMSCs) sharing the same morphological and functional characteristics as human MSCs can be successfully isolated from adult bone marrow without previous mouse or bone marrow treatment. Therefore, mMSCs will be an important tool to study the in vivo behaviour and fate of this cell type after grafting in mouse pathology models.     

Lipids isolated from bone induce the migration of human breast cancer cells

Bone is the most common site to which breast cancer cells metastasize. We found that osteoblast-like MG63 cells and human bone tissue contain the bile acid salt sodium deoxycholate (DC). MG63 cells take up and accumulate DC from the medium, suggesting that the bone-derived DC originates from serum. DC released from MG63 cells or bone tissue promotes cell survival and induces the migration of metastatic human breast cancer MDA-MB-231 cells. The bile acid receptor farnesoid X receptor (FXR) antagonist Z-guggulsterone prevents the migration of these cells and induces apoptosis. DC increases the gene expression of FXR and induces its translocation to the nucleus of MDA-MB-231 cells. Nuclear translocation of FXR is concurrent with the increase of urokinase-type plasminogen activator (uPA) and the formation of F-actin, two factors critical for the migration of breast cancer cells. Our results suggest a novel mechanism by which DC-induced increase of uPA and binding to the uPA receptor of the same breast cancer cell self-propel its migration and metastasis to the bone.     

Segmental bone defects: from cellular and molecular pathways to the development of novel biological treatments

Several conditions in clinical orthopaedic practice can lead to the development of a diaphyseal segmental bone defect, which cannot heal without intervention. Segmental bone defects have been traditionally treated with bone grafting and/or distraction osteogenesis, methods that have many advantages, but also major drawbacks, such as limited availability, risk of disease transmission and prolonged treatment. In order to overcome such limitations, biological treatments have been developed based on specific pathways of bone physiology and healing. Bone tissue engineering is a dynamic field of research, combining osteogenic cells, osteoinductive factors, such as bone morphogenetic proteins, and scaffolds with osteoconductive and osteoinductive attributes, to produce constructs that could be used as bone graft substitutes for the treatment of segmental bone defects. Scaffolds are usually made of ceramic or polymeric biomaterials, or combinations of both in composite materials. The purpose of the present review is to discuss in detail the molecular and cellular basis for the development of bone tissue engineering constructs.     

Surface porous fibre-reinforced composite bulk bone substitute

The aim of this study was to describe and evaluate the significance of a porous surface with bioactive glass granules (S53P4) covering an artificial bulk material based on polymethylmetacrylate (PMMA) and fibre-reinforced composite (FRC) technology. Effort was focused particularly on characters of the porous surface and biomechanical properties of the material in vitro, and test in vivo the implant in reconstruction in an experimental long bone segment defect model. The defect, 10 mm in length, created in the shaft of rabbit tibia, was reconstructed by the implant and fixed by intramedullary K-wires. The implant was incorporated within 4 weeks by new bone growth from the host bone covering particularly its posterior surface and cortex/implant junctions with bridging trabecular bone. Later, at 8 weeks, new bone was found also at the cortex/implant interface and in the medullary canal of the implant. Histometric measurements revealed direct bone/implant surface contact in 34% at the interface. Bioactive glass granules in the porous surface evoked the most direct contact with bone. The implants manufactured from PMMA only served as a control group, and showed significantly lower osteoconductive properties. Biomechanical measurements in vitro of fibre-reinforced PMMA specimens revealed values for bending strength and the flexural modulus to match them to human bone. This artificial bulk bone material based on PMMA/FRC technology seems to have proposing properties to be used as a bone substitute on load-bearing conditions. This revised version was published online in July 2006 with corrections to the Cover Date.     

Effect of including damage at the tissue level in the nonlinear homogenisation of trabecular bone

Being able to predict bone fracture or implant stability needs a proper constitutive model of trabecular bone at the macroscale in multiaxial, non-monotonic loading modes. Its macroscopic damage behaviour has been investigated experimentally in the past, mostly with the restriction of uniaxial cyclic loading experiments for different samples, which does not allow for the investigation of several load cases in the same sample as damage in one direction may affect the behaviour in other directions. Homogenised finite element models of whole bones have the potential to assess complicated scenarios and thus improve clinical predictions. The aim of this study is to use a homogenisation-based multiscale procedure to upscale the damage behaviour of bone from an assumed solid phase constitutive law and investigate its multiaxial behaviour for the first time. Twelve cubic specimens were each submitted to nine proportional strain histories by using a parallel code developed in-house. Evolution of post-elastic properties for trabecular bone was assessed for a small range of macroscopic plastic strains in these nine load cases. Damage evolution was found to be non-isotropic, and both damage and hardening were found to depend on the loading mode (tensile, compression or shear); both were characterised by linear laws with relatively high coefficients of determination. It is expected that the knowledge of the macroscopic behaviour of trabecular bone gained in this study will help in creating more precise continuum FE models of whole bones that improve clinical predictions.     

An overview on bone protein extract as the new generation of demineralized bone matrix

Bone protein extract is regarded as the new generation of demineralized bone matrix. The aim of this paper is to describe and characterize the properties of demineralized bone matrix and its new generation product in addition to its application in animal and human studies. Bone protein extract has features of osteoconductivity, osteoinductivity and osteogenicity, which originate from its unique and precise processing. It has exhibited powerful bone formation capacity both in animal experiments and in clinical trials by providing an optimal microenvironment for osteogenesis. Furthermore, not only does it have excellent biocompatibility, it also has good compatibility with other implant materials, helping it bridge the host and implanted materials. Bone protein extract could be a promising alternative for demineralized bone matrix as a bone graft substitute.     

Effect of modified pectin molecules on the growth of bone cells

The aim of this study was to investigate molecular candidates for bone implant nanocoatings, which could improve biocompatibility of implant materials. Primary rat bone cells and murine preosteoblastic MC3T3-E1 cells were cultured on enzymatically modified hairy regions (MHR-A and MHR-B) of apple pectins. MHRs were covalently attached to tissue culture polystyrene (TCPS) or glass. Uncoated substrata or bone slices were used as controls. Cell attachment, proliferation, and differentiation were investigated with fluorescence and confocal microscopy. Bone cells seem to prefer MHR-B coating to MHR-A coating. On MHR-A samples, the overall numbers as well as proportions of active osteoclasts were diminished compared to those on MHR-B, TCPS, or bone. Focal adhesions indicating attachment of the osteoblastic cells were detected on MHR-B and uncoated controls but not on MHR-A. These results demonstrate the possibility to modify surfaces with pectin nanocoatings.     

Periprosthetic bone remodelling of a collum femoris preserving cementless titanium femoral hip replacement

Total hip arthroplasty represents a major surgical achievement for pain relief and restoration of lifestyle quality due to the joint disease of osteoarthritis. Total hip replacement has evolved over the past 30 years utilising a variety of biocompatible materials, geometric shapes and fixation techniques. The main objective of this study is to investigate the long-term effects of strain adaptive bone remodelling due to the influence of a novel titanium cementless femoral hip replacement. The period of on-growth has been taken into account and the simulation has been run to predict the remodelling behaviour for a 36-month period. The main conclusion from this analysis is that the implant does shield the calcar to a similar degree as other cementless femoral hip designs. It does, however, tend to cause bone to be laid down along its length. This may, in part, be due to the novel geometry of the implant interlocking with and loading the bone.     

Periprosthetic bone remodelling of a collum femoris preserving cementless titanium femoral hip replacement

Total hip arthroplasty represents a major surgical achievement for pain relief and restoration of lifestyle quality due to the joint disease of osteoarthritis. Total hip replacement has evolved over the past 30 years utilising a variety of biocompatible materials, geometric shapes and fixation techniques. The main objective of this study is to investigate the long-term effects of strain adaptive bone remodelling due to the influence of a novel titanium cementless femoral hip replacement. The period of on-growth has been taken into account and the simulation has been run to predict the remodelling behaviour for a 36-month period. The main conclusion from this analysis is that the implant does shield the calcar to a similar degree as other cementless femoral hip designs. It does, however, tend to cause bone to be laid down along its length. This may, in part, be due to the novel geometry of the implant interlocking with and loading the bone.     

A new transplant bone for maxillary alveolar cleft

An innovative technique with distraction osteogenesis has been developed in our research group to explore autogenous bone transplantation into craniofacial bone defects. This technique was designed to investigate bone-marrow transplantion using a chondroid or fibula bone graft into simulated alveolar bone defects in mice in terms of the osteogenic process and activity. As an experimental model of maxillary alveolar bone cleft available for testing bone-inductive materials, a critical-size defect was formed in the pre-maxillary bone of male mice using a surgical trephine bur with a low-speed dental engine. Distraction osteogenesis was performed using an external fixation device. The osteotomy site was occupied by an external callus consisting of hyaline cartilage with a large quantity of chondroid bone. Moreover, bone remodelling with new bone formation was demonstrated 30 days after the transplantation. Bone adhesion was better in chondroid bone grafting than in fibula bone grafting. The present findings are the first to demonstrate the potential of chondroid bone transplantation as a new therapeutic system of bone grafting, suitable for bone substitutes in craniofacial bone defects.     

Tissue reaction of deproteinized bovine bone matrix grafting in ectopic site: histological study on sheep

The aim of this paper was to evaluate through histological analysis of the tissue reaction of deproteinized bovine bone matrix (DBBM) when inserted into the site of intramuscular ectopic sheep. In this study, 16 sheep received 3 groups and these were divided into 2 experimental times: Group 1—sham group, Group 2—particulate autogenous bone and Group 3—DBBM granules. All animals underwent surgical procedures for insertion of materials in an ectopic site (muscles of the lower back and after 3 and 6 months postoperatively, the samples were evaluated by histological analysis. The results indicated that the Sham group showed dense collagen fibers and thin, characterizing fibrosis at 3 and 6 months. In the autograft group there was a significant amount of collagen deposition and decreased inflammation at 6 months postoperatively. Group of DBBM, it was noted the presence of dense connective tissue and surrounding remaining particles was observed the formation of with osteoid characteristic tissue. The DBBM demonstrated biocompatibility, osteoconductivity and small osteogenesis capacity on ectopic site.     

Influence of Enamel Matrix Derivative on Cells at Different Maturation Stages of Differentiation

Enamel matrix derivative (EMD), a porcine extract harvested from developing porcine teeth, has been shown to promote formation of new cementum, periodontal ligament and alveolar bone. Despite its widespread use, an incredibly large variability among in vitro studies has been observed. The aim of the present study was to determine the influence of EMD on cells at different maturation stages of osteoblast differentiation by testing 6 cell types to determine if cell phenotype plays a role in cell behaviour following treatment with EMD. Six cell types including MC3T3-E1 pre-osteoblasts, rat calvarial osteoblasts, human periodontal ligament (PDL) cells, ROS cells, MG63 cells and human alveolar osteoblasts were cultured in the presence or absence of EMD and proliferation rates were quantified by an MTS assay. Gene expression of collagen1(COL1), alkaline phosphate(ALP) and osteocalcin(OC) were investigated by real-time PCR. While EMD significantly increased cell proliferation of all cell types, its effect on osteoblast differentiation was more variable. EMD significantly up-regulated gene expression of COL1, ALP and OC in cells early in their differentiation process when compared to osteoblasts at later stages of maturation. Furthermore, the effect of cell passaging of primary human PDL cells (passage 2 to 15) was tested in response to treatment with EMD. EMD significantly increased cell proliferation and differentiation of cells at passages 2–5 however had completely lost their ability to respond to EMD by passages 10+. The results from the present study suggest that cell stimulation with EMD has a more pronounced effect on cells earlier in their differentiation process and may partially explain why treatment with EMD primarily favors regeneration of periodontal defects (where the periodontal ligament contains a higher number of undifferentiated progenitor cells) over regeneration of pure alveolar bone defects containing no periodontal ligament and a more limited number of osteoprogenitor cells.