Effect of the support matrix on biotransformation of benzaldehyde to benzyl alcohol by yeast cells in aqueous and aqueous-organic two phase systems

Summary Biotransformation of benzaldehyde to benzyl alcohol bySaccharomyces cerevisiae immobilized in different support matrices was investigated. Polymers with intrinsic hydrophobic and/or hydrophilic nature as well as mixed hydrophobic and hydrophilic supports were examined both in aqueous and bisphasic aqueous-organic systems. The hydrophobic support material ENTP-2000 or mixed silicone:alginate (50-2550-75) proved to be most suitable not only for nonconventional media but also for conventional aqueous media for production of benzyl alcohol. With ENTP-2000, catalytic activity and maximum yield were 159 mol h^–1 g^–1 dry weight catalyst and 0.89 mM, respectively, in hexane containing 2% moisture. Corresponding values in aqueous media were 246 mol h^–1 g^–1 dry weight catalyst and 1.53 mM. With 5050 silicone:alginate, catalytic activity and maximum yield were 177 mol h^–1 g^–1 dry weight catalyst and 1.18 mM, respectively, in hexane containing 2% moisture. Corresponding values in aqueous media were 192 mol h^–1 g^–1 dry weight catalyst and 0.8 mM.     

Efficiency of hydrogen photoproduction by chloroplast-bacterial hydrogenase systems

A comparative study of H₂ photoproduction by chloroplasts and solubilized chlorophyll was performed in the presence of hydrogenase preparations of Clostridium butyricum. The photoproduction of H₂ by chloroplasts in the absence of exogenous electron donors, and with irreversibly oxidized dithiothreitol and cysteine, is thought to be limited by a cyclic transport of electrons wherein methylviologen short-circuits the electron transport in photosystem I. The efficiency of H₂ photoproduction by chloroplasts with ascorbate and NADPH is limited by a back reaction between light-reduced methylviologen and the oxidized electron donors. The use of a combination of electron donors (dithiothreitol and ascorbate), providing anaerobiosis without damage to chloroplasts, makes it possible to avoid consumption of reduced methylviologen for the reduction of oxidized electron donors and to exclude the short-circuiting of electron transfer. Under these conditions, photoproduction of H₂ was observed to occur with a rate of 350 to 400 micromoles H₂ per milligram chlorophyll per hour. In this case, the full electron-transferring capability of photosystem I (measured by irreversible photoreduction of methyl red or O₂) is used to produce H₂.     

Screening of organic solvents for bioprocesses using aqueous-organic two-phase systems

The application of conventional organic solvents has been essential in several steps of bioprocesses in order to achieve sufficient economic efficiency. The use of organic solvents is frequently used either to partly or fully replace water in the reaction medium or as a process aid for downstream separation.Nowadays, manufacturers are increasingly requested to avoid and substitute solvents with hazardous potential. Therefore, the solvent selection must account for potential environmental hazards, health and safety problems, in addition to fulfilling the ideal characteristics for application in a process.For the first time, criteria including Environment, Health and Safety (EHS), as well as the technical requirements for reaction and separation have been reviewed, collected and integrated in a single organic solvent screening strategy to be used as a guideline for narrowing down the list of solvents to test experimentally. Additionally, we have also included a solvent selection guide based on the methodology developed in the Innovative Medicines Initiative CHEM21 (IMI CHEM21) project and applied specifically to water-immiscible solvents commonly used in bioprocesses.     

Stability performance ofCynara cardunculus L. acid protease in aqueous-organic biphasic systems

Stability performance of the acid protease ofCynara cardunculus L. in biphasic systems containing ethyl acetate,n-hexane or isooctane was investigated and compared with that of pepsin. Activity retention was higher in the system containingn-hexane. In this system 100% retention was observed up to 144 hours. Pre-saturation of phases was found to increase enzyme stability in the cases ofn-hexane and isooctane and to be an absolute requirement in the case of ethyl acetate. The results obtained suggest also that, when dealing with pre-saturated phases, log P cannot be used straightforwardly to predict enzyme stability in biphasic systems.     

Electromotive phenomena in partition of erythrocytes in aqueous polymer two phase systems

Measurement was made of the electrical potential between the two phases formed in an aqueous solution containing 5% dextran, 4% polyethylene glycol and varying concentrations of sodium chloride and sodium phosphate. Partition of the polycation DEAE-dextran-glycyltyrosine-¹²⁵I in such systems containing varying salt composition could be correlated with the measured electrical potential. Partion of human erythrocytes which have a negative surface charge was also correlated related with the measured electrical potential. Binding of DEAE-dextran-glycyltyrosine-¹²⁵I to human erythrocytes had less effect on their partitioning than might be expected from the number of positive charges bound to their surface.     

Effect of pH on rate of interfacial inactivation of serine proteases in aqueous-organic systems

We studied the inactivation of trypsin and alpha- and beta-chymotrypsin by passage of droplets of tridecane though their aqueous solutions. The mechanism involves contact with the interface, because the loss of activity is proportional to the total area exposed. The rates of inactivation vary up to fivefold over the pH range 3 to 10. However, there is no clear maximum at the isoelectric point (pI) of each enzyme, where the amount of protein adsorbed is usually found to be highest. This is probably because, at the pI, there is also a minimum in structural alteration on adsorption. There may be a weak correlation with pH effects on foamability of the enzyme solutions, a parameter reported to reflect the "hardness" of different proteins, which controls their interfacial unfolding. The pH dependence of both inactivation and hardness cautions against attempts to correlate inactivation of different enzymes with a single value of a parameter such as adiabatic compressibility. There is no correlation between the effects of pH on interfacial inactivation and those reported in the literature on irreversible inactivation in concentrated urea or at high temperature.     

Peptide synthesis of aspartame precursor using organic-solvent-stable PST-01 protease in monophasic aqueous-organic solvent systems

The PST-01 protease is a metalloprotease that has zinc ion at the active center and is very stable in the presence of water-soluble organic solvents. The reaction rates and the equilibrium yields of the aspartame precursor N-carbobenzoxy-L-aspartyl-L-phenylalanine methyl ester (Cbz-Asp-Phe-OMe) synthesis from N-carbobenzoxy-L-aspartic acid (Cbz-Asp) and L-phenylalanine methyl ester (Phe-OMe) in the presence of water-soluble organic solvents were investigated under various conditions. Higher reaction rate and yield of Cbz-Asp-Phe-OMe were attained by the PST-01 protease when 30 mM Cbz-Asp and 500 mM Phe-OMe were used. The maximum reaction rate was obtained pH 8.0 and 37 degrees C. In the presence of dimethylsulfoxide (DMSO), glycerol, methanol, and ethylene glycol, higher reaction rates were obtained. The equilibrium yield was the highest in the presence of DMSO. The equilibrium yield of Cbz-Asp-Phe-OMe using the PST-01 protease attained 83% in the presence of 50% (v/v) DMSO.     

Protease-catalysed peptide synthesis in aqueous-organic two-phase systems: reactant precipitation and interfacial inactivation.

Peptides can be efficiently synthesized by the proteases thermolysin and pepsin acting in aqueous-organic two-phase systems similar to those reported previously. However, a number of problems can prevent successful reactions in these systems, with these and other proteases: (1) Complexes between amino acid reactants that are sparingly soluble in both phases may be precipitated, though their solubility behavior is complex; (2) the enzyme may be subject to rapid inactivation by contact with the phase interface, and the rate of this is unusually dependent on the nature of the solvent; and (3) the reaction rate is usually slow.     

Peptide synthesis catalyzed by Cynara cardunculus L. Acid protease in aqueous-organic biphasic systems

The ability of Cynara cardunculus L. protease to perform peptide synthesis was investigated using an aqueous organic biphasic system and the amino acid derivatives CBZ.Phe and Met.OMe. The reaction products were separated by RP-HPLC and identified by amino acid analysis and by EI-MS. Significant amounts of the dipeptide CBZ.Phe.Met.OMe was produced within 24h by Cynara cardunculus L. protease as compared with the amount produced by pepsin under the same conditions.     

Oxidation of the two beta-carotene molecules in the photosystem II reaction center

We present a spectroscopic characterization of the two nonequivalent beta-carotene molecules in the photosystem II reaction center. Their electronic and vibrational properties exhibit significant differences, reflecting a somewhat different configuration for these two cofactors. Both carotenoid molecules are redox-active and can be oxidized by illumination of the reaction centers in the presence of an electron acceptor. The radical cation species show similar differences in their spectroscopic properties. The results are discussed in terms of the structure and unusual function of these carotenoids. In addition, the attribution of resonance Raman spectra of photosystem II preparations excited in the range 800-900 nm is discussed. Although contributions of chlorophyll cations cannot be formally ruled out, our results demonstrate that these spectra mainly arise from the cation radical species of the two carotenoids present in photosystem II reaction centers.     

Reductive biotransformation by wild type and mutant strains of Saccharomyces cerevisiae in aqueous-organic solvent biphasic systems

Whole cells of Saccharomyces cerevisiae analyzed the conversion of benzaldehyde to benzyl alcohol in aqueous-organic biphasic media. Reaction rate increased dramatically as moisture content of the solvent was increased in the range 0% to 2%. The highest biotransformation rates were observed when hexane was used as organic solvent. Benzaldehyde was also converted to benzyl alcohol by a cell-free crude extract in biphasic systems containing hexane, although the rate of product formation was much lower. Mutant strains of S. cerevisiae lacking some or all of the ADH isoenzymes, ADH I, II, and III, manifested similar rates for bioconversion of benzaldehyde to benzyl alcohol in both aqueous and two-phase systems. In general, conversion rates observed in aqueous media were 2 to 3 times higher than those observed in hexane containing 2% moisture.     

Development of a general ligand for immunoaffinity partitioning in two phase aqueous polymer systems

The effect on the partition of erythrocytes in a two phase aqueous polymer system based on dextran T500 and polyethylene glycol (PEG) 8000 of a combination of immunoaffinity ligands, namely, rabbit immunoglobulin G (IgG) and PEG 1900-modified monoclonal IgG, was examined as a potential cell separation technique. Several hybridoma lines secreting mouse monoclonal IgG specific for the Fc receptor of rabbit IgG were raised. The monoclonal IgG was modified by cyanuric chloride attachment of PEG 1900, causing the modified antibody to partition predominantly into the PEG-rich upper phase of the systems. The PEG-modified monoclonal IgG was used as an affinity ligand in the two phase polymer system to specifically increase the partition of rabbit anti-NN glycophorin IgG. The rabbit IgG was applied together with the PEG-modified monoclonal IgG to increase the partition of human erythrocytes. The same system had no effect on the partition of rabbit erythrocytes. These experiments demonstrate that a monoclonal antibody can be modified and used as a general reagent with which to alter cell partition in two phase aqueous polymer systems in an immunologically specific manner.     

The effect of phase viscosity ratio on the rheology of liquid two phase gelatin-locust bean gum systems

The rheological behaviour of liquid two phase gelatin–locust bean gum (LBG) systems, comprising of (a) liquid LBG enriched continuous phase, and (b) flow-deformable gelatin-enriched dispersed particles seems to be determined, at the same phase composition, by phase viscosity ratio (μ). In the μ range from 0.03 to 0.21, viscosity dropped to values noticeably lower (13–40 times) than those of the corresponding LBG solution. Decrease in the viscosity of the mixtures was not observed at μ=0.5–0.6, corresponding that to the maximum energy scatter inside the droplets, in agreement with Mason’s conception of droplet deformation and disruption of liquid Newtonian emulsions.