新石器时代人骨颞下颌关节的研究

对宝鸡、华县新石器时代人骨22个成年个体的颞下颌关节进行研究。发现该时期人类中23％者存在髁状突和关节结节骨质的严重磨损、不对称磨损和不规则增生,认为这是由于强大的咀嚼压力所造成的继发性关节退行性变。颞下颌关节的测量结果表明,与现生人类相比较,新石器时代人类的髁状突较大,关节结节较高,关节凹较深,关节结节后斜面斜度较小,反映了人类进化过程中由于生活方式和口腔功能的改变颞下颌关节的变小和关节承压结构的减弱。     

Development of the temporomandibular joint in miniature pig embryos

The temporomandibular joint (TMJ) is a synovial joint involved in sliding and hinge movements of lower jaw in mammals. Studies on TMJ development in embryos have been mainly performed using rodents. However, the TMJ structure in rodents differs in several aspects from that in humans. There are few studies on the embryonic development of TMJ in large mammals. In the present study, we investigated the embryonic developmental characteristics of the TMJ in pigs histologically. Embryonic day 35 (E35), E45, E55, E75, E90, and postnatal day 1(P1) embryos/fetuses from the pigs were used for the study. The results showed condensation of mesenchymal cells on E35. The inferior articular cavity was formed on E45, together with a narrow crack in the superior articular cavity region. The superior and inferior articular cavities and articular disc of the TMJ were completely formed on E55. On E75, the condyle showed an obvious conical shape and the superior and inferior joint cavities were enlarged. Furthermore, the mandibular ramus and mandibular body under the neck of the condyle were ossified from E75 to P1 day. The chondrocyte layer of the condyle was significantly thinner from E75 to P1. It is speculated that the spatiotemporal development of the TMJ in miniature pig embryos is similar to that in humans. Embryonic development of the pig TMJ is an important bridge for translating the results of rodent research to medical applications.     

Dietary correlates of temporomandibular joint morphology in the great apes

Behavioral observations of great apes have consistently identified differences in feeding behavior among species, and these differences have been linked to variation in masticatory form. As the point at which the mandible and cranium articulate, the temporomandibular joint (TMJ) is an important component of the masticatory apparatus. Forces are transmitted between the mandible and cranium via the TMJ, and this joint helps govern mandibular range of motion. This study examined the extent to which TMJ form covaries with feeding behavior in the great apes by testing a series of biomechanical hypotheses relating to specific components of joint shape using linear measurements extracted from three‐dimensional coordinate data. Results of these analyses found that taxa differ significantly in TMJ shape, particularly in the mandibular fossa. Chimpanzees have relatively more anteroposteriorly elongated joint surfaces, whereas gorillas tend to have relatively anteroposteriorly compressed joints. Orangutans were most commonly intermediate in form between Pan and Gorilla, perhaps reflecting a trade‐off between jaw gape and load resistance capabilities. Importantly, much of the observed variation among taxa reflects differences in morphologies that facilitate gape over force production. These data therefore continue to emphasize the unclear relationship between mandibular loading and bony morphology, but highlight the need for further data regarding food material properties, jaw gape, and ingestive/food processing behaviors. Am J Phys Anthropol, 2013. © 2012 Wiley Periodicals, Inc.     

The instantaneous center of rotation of the mandible in nonhuman primates

Kinematic analyses of mandibular movement in humans demonstrate that the mandibular instantaneous center of rotation (ICoR) is commonly located near the level of the occlusal plane and varies in its position during a chewing sequence. Few data are available regarding the location of the ICoR in nonhuman primates and it remains unclear how the position of the ICoR varies in association with mastication and/or gape behaviors. ICoR was quantified throughout the gape cycle in five species of nonhuman primates (Macaca mulatta, Cebus apella, Chlorocebus aethiops, Eulemur fulvus, and Varecia variegata). The ICoR is commonly located below the mandibular condyle close to the occlusal plane and varies considerably both superoinferiorly and anteroposteriorly through the gape cycle. The path of the ICoR, and by inference condylar movement, in Macaca and Chlorocebus differs from humans whereas movement in Cebus resembles that of humans. Similarities between humans and Cebus in articular eminence and occlusal morphology may explain these resemblances. Food material properties had little influence on ICoR movement parameters.     

Dietary correlates of temporomandibular joint morphology in New World primates

Previous analyses of the masticatory apparatus have demonstrated that the shape of the temporomandibular joint (TMJ) is functionally and adaptively linked to variation in feeding behavior and diet in primates. Building on previous research, this study presents an analysis of the link between diet and TMJ morphology in the context of functional and dietary differences among New World primates. To evaluate this proposed relationship, I used three-dimensional morphometric methods to quantify TMJ shape across a sample of 13 platyrrhine species. A broad interspecific analysis of this sample found strong relationships among TMJ size, TMJ shape, and diet, suggesting that both size and diet are significant factors influencing TMJ morphology in New World primates. However, it is likely that at least some of these differences are related to a division of dietary categories along clade lines.A series of hypotheses related to load resistance capabilities and range of motion in the TMJ were then tested among small groups of closely related taxa with documented dietary differences. These pairwise analyses indicate that some aspects of TMJ morphology can be used to differentiate among closely related species with different diets. However, not all of my predictions were upheld. The anteroposterior dimensions of the TMJ were most strongly consistent with hypothesized differences in ingestive/masticatory behaviors and jaw gape, whereas the predictions generated for variation in entoglenoid and articular tubercle height were not upheld. These results imply that while some features can be reliably associated with increased load resistance and facilitation of wider jaw gapes in the masticatory apparatus, other features are less strongly correlated with masticatory function.     

Feeding behavior,mastication, and tooth wear in the western tarsier (Tarsius bancanus)

We assessed feeding and masticatory function in western tarsiers, Tarsius bancanus,from field study, from videotaped recordings of the feeding and chewing behavior of wild-caught animals in temporary captivity, from dissections of the muscles of mastication, and from scanning electron microscopic (SEM) examination of wear features of the teeth. Ingestion of large items of animal prey is made possible by the animal’s extremely wide gape. Anterior translation of the knob-like mandibular condyle in the anteroposteriorly elongated mandibular fossa makes possible a gape angle of 60–70‡. We observed two means of ingestion of grasshopper prey: ingestion by mastication, in which the postcanine teeth sever and reduce bites of the food as it is thrust into the mouth cavity, and repeated gape-shove sequences, during which the tarsier pushed grasshoppers of large diameter into the anterior part of its mouth and attempted to sever a bite with its anterior teeth. Morsels were successfully severed after three to five such sequences, and reduced quickly,with relatively few powerful, crushing chews. The insect cuticle was not evenly comminuted during mastication. We observed a marked side-to-side grinding component in the normal chewing cycle of T. bancanuson videotape and confirmed it by SEM. The main jaw adductors are bulky, long-fibered muscles that can accommodate wide grapes and still generate, at wide degrees of gape,the high occlusal pressures necessary to fracture thick chitinous exoskeletons of the scarabid beetles that form a substantial element of the western tarsier’s diet.     

The expanded mandibular condyle of the Megaladapidae

The Megaladapidae have a posterior expansion of the articular surface of the mandibular condyle. Several other strepsirhine species exhibit a similar condylar surface. In this study, I propose two behavioral scenarios in which the posterior articular expansion might function: 1) contact with the postglenoid process and resistance to joint stress during browsing, and 2) movement against the postglenoid process during the fast closing and power strokes of mastication, as a consequence of large transverse jaw movements and associated with a strong mandibular symphysis. These models are evaluated through dissection of the TMJ in Lepilemur and from comparative anatomical observations on strepsirhines and ungulates. In Lepilemur the mandibular symphysis is unfused, but compared to the unfused symphyses of other strepsirhines is strengthened by interlocking bony projections (Beecher [1977] Am. J. Phys. Anthropol. 47:325–336). An accessory articular meniscus is found between the posterior articular expansion and the postglenoid process in Lepilemur, suggesting that significant movement occurs in this part of the TMJ. The symphysis is fused in adult specimens of Megaladapis. A posterior articular expansion is common among ungulates, and its presence is associated not with browsing but with symphyseal fusion. This supports the second model and suggests that the posterior articular expansion functions as a movement surface during mastication. Schwartz and Tattersall ([1987] J. Hum. Evol. 16:23–40) cite the posterior articular expansion as a synapomorphy uniting an Adapis-Leptadapis clade with a Megaladapidae-Daubentonia-Indridae clade. The comparative evidence suggests that the posterior articular expansion has evolved convergently in adapines, notharctines, megaladapids, hapalemurids, and indrids as part of a functional complex related to herbivory. However, close morphological similarity of the posterior articular expansion among genera within these strepsirhine subfamilies and families indicates that it is probably a reliable synapomorphy at lower taxonomic levels. Am J Phys Anthropol 103:263–276, 1997. © 1997 Wiley-Liss, Inc.     

Mandibular function in Galago crassicaudatus and Macaca fascicularis: an in vivo approach to stress analysis of the mandible.

Single-element and/or rosette strain gages were bonded to mandibular cortical bone in Galago crassicaudatus and Macaca fascicularis. Five galago and eleven macaque bone strain experiments were performed and analyzed. In vivo bone strain was recorded from the lateral surface of the mandibular corpus below the postcanine tooth row during transducer biting and during mastication and ingestion of food objects. In macaques and galagos, the mandibular corpus on the balancing side is primarily bent in the sagittal plane during mastication and is both twisted about its long axis and bent in the sagittal plane during transducer biting. On the working side, it is primarily twisted about its long axis and directly sheared perpendicular to its long axis, and portions of it are bent in the sagittal plane during mastication and molar transducer biting. In macaques, the mandibular corpus on each side is primarily bent in the sagittal plane and twisted during incisal transducer biting and ingestion of food objects, and it is transversely bent and slightly twisted during jaw opening. Since galagos usually refused to bite the transducer or food objects with their incisors, an adequate characterization of mandibular stress patterns during these behaviors was not possible. In galagos the mandibular corpus experiences very little transverse bending stress during jaw opening, perhaps in part due to its unfused mandibular symphysis. Marked differences in the patterns of mandibular bone strain were present between galagos and macaques during the masticatory power stroke and during transducer biting. Galagos consistently had much more strain on the working side of the mandibular corpus than on the balancing side. These experiments support the hypothesis that galagos, in contrast to macaques, employ a larger amount of working-side muscle force relative to the balancing-side muscle force during unilateral biting and mastication, and that the fused mandibular symphysis is an adaption to use a maximal amount of balancing-side muscle force during unilateral biting and mastication. These experiments also demonstrate the effects that rosette position, bite force magnitudes, and types of food eaten have on recorded mandibular strain patterns.     

The Biomechanical Effects of Sagittal Split Ramus Osteotomy on Temporomandibular Joint

Abstract

The aim of this study was to evaluate the stress distributions and deformations of the temporomandibular joint (TMJ) during different periods before and after sagittal split ramus osteotomy (SSRO). A three-dimensional finite element model of the mandible and TMJ was established, based on the preoperative CT of a patient with mandibular prognathism. Numerical SSRO was performed and the models of three postoperative periods were established. Contact elements were used to simulate the interaction between the articular discs and the articular cartilages. Nonlinear cable elements were used to simulate the disc attachments and the ligaments. Muscle forces and boundary conditions corresponding to the central occlusion were applied on all the models. The results showed that the stress distributions of the patient’s TMJs were not the same as those of asymptomatic subjects. The stress distributions and deformations of the disc, condylar and temporal cartilage were changed at different periods after SSRO. The biomechanical parameters of TMJ were improved after SSRO. And the postoperative results showed that appropriate functional training could help to avoid TMJ diseases. Therefore SSRO could improve the stress distributions of the TMJ and relieve the symptoms of temporomandibular disorder (TMD).     

Aspects of masticatory form and function in common tree shrews,Tupaia glis

Tree shrews have relatively primitive tribosphenic molars that are apparently similar to those of basal eutherians; thus, these animals have been used as a model to describe mastication in early mammals. In this study the gross morphology of the bony skull, joints, dentition, and muscles of mastication are related to potential jaw movements and cuspal relationships. Potential for complex mandibular movements is indicated by a mobile mandibular symphysis, shallow mandibular fossa that is large compared to its resident condyle, and relatively loose temporomandibular joint ligaments. Abrasive tooth wear is noticeable, and is most marked at the first molars and buccal aspects of the upper cheek teeth distal to P². Muscle morphology is basically similar to that previously described for Tupaia minor and Ptilocercus lowii. However, in T. glis, an intraorbital part of deep temporalis has the potential for inducing lingual translation of its dentary, and the large medial pterygoid has extended its origin anteriorly to the floor of the orbit, which would enhance protrusion. The importance of the tongue and hyoid muscles during mastication is suggested by broadly expanded anterior bellies of digastrics, which may assist mylohyoids in tensing the floor of the mouth during forceful tongue actions, and by preliminary electromyography, which suggests that masticatory muscles alone cannot fully account for jaw movements in this species.     

Mandibular movement patterns relative to food types in common tree shrews (Tupaia glis)

Although common tree shrews have long been considered a model system for early eutherian mastication, little information on mandibular movement patterns relative to specific food types has been reported. Detailed analysis of mandibular movement patterns when related to resulting attrition facets may permit more accurate extrapolations regarding the dietary habits of primitive mammals. Marker beads were sewn to chins of five animals that were placed in a restraint system and filmed while they fully masticated mealworm larvae and standardized pieces of banana, almond, and commercial cat chow. These sequences were divided into early, middle, and late thirds of food reduction. Mandibular positions from both frontal and lateral perspectives were digitized frame by frame to yield plots of orbits in three dimensions as well as graphic display of displacements, velocities, and accelerations. Plot coordinates were averaged to generate composite orbital shapes. Significant (p < 0.01) findings included: (1) shortest orbital durations and greatest peak closing velocities and accelerations in early third of reduction; (2) smallest maximum gape, smallest maximum lateral excursion from midline, and longest duration of powerstroke relative to orbital duration in late third of reduction; (3) shortest orbital durations and smallest maximum gape during mastication of chow; (4) greatest maximum lateral excursion during mastication of mealworm larvae; and (5) smallest peak closing accelerations during mastication of banana. Significant differences were also found among subjects for all parameters examined. Capacity for complex jaw movement may have been critical for allowing primitive molars to be used for trituration of a variety of food types, and may have preceded evolution of more specialized molar forms.     

Diversity and Evolution of the Marsupial Mandibular Angular Process

A medial inflection of the mandibular angular process is present in most marsupials. The few living marsupials that lack this trait either are very specialized forms (e.g., Tarsipes) or show a medial inflection at some point in development that is lost in later ontogenetic stages (cf. Dactylopsila and Phascolarctos). A medially inflected angular process is not present in any known extant or extinct placental (including all Cretaceous taxa that preserve the back of the dentary bone). Some extant placentals with enlarged auditory bullae evolved a medial flange of the angular process as a strategy to increase gape, but this is not homologous to the marsupial condition. We conclude that the medially inflected angular process is a shared derived trait of extant and extinct marsupials. The significant diversity in the form of the medially inflected mandibular angular process in marsupials, documented here for 53 taxa, shows a general relation to dietary adaptations. Herbivores (with well-developed masseter and medial pterygoid muscles) tend to have a shelf-like angular process, while small, insectivorous marsupials generally have a rod-like angular process. A close connection between the angular process and the ectotympanic is maintained during early postnatal development in all marsupials examined, a relation not seen in the placentals examined. A previous hypothesis suggested that the angular process plays a role in hearing in pouch-young Monodelphis. Data on the maturation of the auditory system does not support this hypothesis. Currently there are no data on differences in muscular anatomy or mastication between marsupials and placentals that could serve as a causal explanation for the difference in adult form of the angular process between the two groups.     

Size and shape of the mandibular condyle in primates

The relationships between the size of the articular surface of the mandibular condyle and masticatory muscle size, tooth size, diet, and biomechanical variables associated with mastication were studied by taking 12 measurements on skulls of 253 adult female anthropoid primates, including three to ten specimens from each of 32 species. In regressions of condylar length, width, or area against body weight, logarithmic transformations substantially improve the fit of the equations compared with untransformed data. There is a strong relationship between condylar measurements and body weight, with all correlations being .94 or higher. The slopes of the allometric regressions of length, width, and area of the condylar head indicate slight positive allometry with body size. Folivorous primates have smaller condyles than frugivorous primates, and colobines have smaller condyles than cebids, cercopithecines, or hominoids. When colobines are eliminated, the differences between frugivores and folivores are not significant. However, the two species with the relatively largest condyles are Pongo pygmaeus and Cercocebus torquatus, suggesting that there may be a relationship between unusually large condylar dimensions and the ability to crack hard nuts between the teeth. Cranial features having strong positive correlations with condylar dimensions include facial prognathism, maxillary incisor size, maxillary postcanine area, mandibular ramus breadth, and temporal fossa area. These data are interpreted as indicating that relatively large condyles are associated with relatively large masticatory muscles, relatively inefficient mandibular biomechanics, and a large dentition. These relationships support the growing evidence that the temporomandibular joint is a stress-bearing joint in normal function.     

Cranial base and jaw relationship

The lateral skull radiographs of 124 boys aged approximately 10 years divided equally between the four angle classes were digitized in an effort to establish the relationship between cranial base size and shape and jaw relationship. Comparison of the means for occlusal groups showed a trend from class II to class III as cranial base dimensions and angle decreased. The condyle was also more distally positioned with respect to nasion, point A and the Pterygomaxillary vertical in the class II groups. Cranial base length correlated strongly with maxillary length but weakly with mandibular length. Nevertheless, the size of the maxilla did not influence its prognathism. The cranial base angle was strongly correlated (-0.7) with angle sella-nasion-point B. It is concluded that cranial base size and shape influence mandibular prognathism by determining the anteroposterior position of the condyle relative to the facial profile.     

Loss of molar occlusion and mandibular morphology in adults in an ancient human population consuming a coarse diet

The purpose of the study is to investigate the link between number of molar teeth retained in occlusion and mandibular morphology in adults in an ancient, high dental wear human population. The study material comprises skeletons from Mediaeval Wharram Percy, England (N = 50 female, 69 male adults). It was hypothesized that adults retaining fewer occluding molars would show reduction in mandibular dimensions, particularly in the ascending ramus and gonial regions where the main muscles of mastication have their insertions. Molar occlusal status is assessed using the concept of functional units. Mandibular morphology is assessed using a suite of ten linear measurements plus the mandibular angle. Results show no evidence for any association between number of molars retained in occlusion and mandibular angle. There was an association between mandibular size and number of molars retained in occlusion, with smaller mandibular dimensions in those retaining fewer occluding molars. Some measurements were affected more than others so that there was also some shape alteration. Alteration of mandibular dimensions was more clearly demonstrable in females than in males. Only in females could significant reduction in the ascending ramus and gonial regions be demonstrated. Reasons for the apparent difference in response to loss of molar occlusion between male and female mandibles are unclear, but sex differences in bony metabolism mediated by hormonal factors may be implicated. Results suggest that care should be exercised when including mandibles from individuals showing loss of molar occlusion in morphological studies. Am J Phys Anthropol 152:383–392, 2013. © 2013 Wiley Periodicals, Inc.     

The temporomandibular joint disc of Asian elephant (Elephas maximus) and African elephant (Loxodonta africana)

The temporomandibular joint (TMJ) is a synovial articulation between the mandibular head of the condylar process of the mandible and the mandibular fossa of the squamous temporal bone. Extensions of the fibrous capsule into the joint space form a biconcave disc that functions as an articulating surface and divides the joint into dorsal and ventral compartments. The TMJ disc plays a crucial role in normal functioning of the joint, and differences in cranial morphology, mastication patterns, and diet are reflected in the material and biochemical properties of the disc. The purpose of the present case study was to compare the regional histologic differences between two elephant genera and quantify the biochemical and biomechanical properties of the African elephant disc. This study provides a unique insight into the elephant TMJ disc and also provides a comparison between the African and the Asian elephant genera. The results demonstrate several remarkable findings. First, structure–function relationships exist within the elephant TMJ disc. Second, regional variations exist in the elephant TMJ disc, and these are likely to correlate with its functional requirement. Additionally, it is apparent that some properties of the disc vary with the specific anatomy, diet requirement, and jaw motion. Finally, in comparison with the TMJ disc of other species, it is clear that, although the elephant disc is unique, it has properties that transcend and are preserved among the species.     

Shape variation in the mole dentary (Talpidae: Mammalia)

The clade Talpidae consists of specialized fossorial forms, shrew‐like moles and semi‐aquatic desmans. As with all higher jawed vertebrates, different functional, phylogenetic and developmental constraints act on different parts of dentary influencing its shape. In order to determine whether morphological variation in the dentary was unified or dispersed into an integrated complex of structural–functional components, a morphometric analysis of the mole dentary was undertaken. The dentary was subdivided into component parts – horizonal ramus; coronoid, condylar, angular processes of the ascending ramus – and outline‐based geometric morphometric methods used to quantify, compare and contrast modes of shape variation within the clade. These were successful in revealing subtle differences and aspects of shape important in distinguishing between mole genera. Closer examination of shape variation within the two fully fossorial mole clades (Talpini and Scalopini) revealed several similarities in ascending ramus shapes between genera from each clade. For example, the broad, truncated appearance of the coronoid process in the talpine genera Talpa and Parascalops was shared with the scalopine genus Scapanus. Also, the more slender, hook‐shaped coronoid process of Euroscaptor and Parascaptor (Talpini) closely resembles that of Scalopus (Scalopini). Interestingly, subspecies (one from each clade) more closely resembled genera other than their own in coronoid process shape. Important distinctions in horizontal ramus shape were found to exist between the two clades, such as the extent of curvature of the ventral margin and relative depth of the horizontal ramus. Results show shape variation in this region is correlated with dental formulae and the relative sizes of the teeth. The taxonomically important dentition differences characteristic of mammals are also reflected in the horizontal ramus results. Moreover, these results suggest size may be affecting shape and the extent of variation in, for example, the coronoid and condylar processes between the semi‐aquatic moles Desmana and Galemys. It is likely that the effects of morphological integration seen at this level of analysis – covariation between shapes of dentary components – may exist because interacting traits are evolving together. Horizontal ramus and coronoid process shape, for example, are similar across Scapanus and Parascalops, but both these shapes have diverged in Scalopus. © 2008 Trustees of the Natural History Museum (London). Journal compilation © 2008 The Linnean Society of London, Zoological Journal of the Linnean Society, 2008, 153 , 187–211.     

Mandibular shape variation in mainland and insular hylobatids

Although hylobatids are the most speciose of the living apes, their morphological interspecies and intraspecies variation remains poorly understood. Here, we assess mandibular shape variation in two species of Hylobates, white-handed (Hylobates lar) and black-handed (Hylobates agilis) gibbons. Using 71 three-dimensional landmarks to quantify mandibular shape, interspecies and intraspecies variation and geographic patterns of mandibular shape are examined in a mixed sex sample of adult H. lar and H. agilis through generalized Procrustes analysis, Procrustes analysis of variance, and principal components analysis. We find that relative to H. agilis, H. lar exhibits a higher amount of variation in mandibular shape. Both species demonstrate similar allometric patterns in mandibular shape. We also highlight a geographic pattern in mandibular shape variation. Compared to mainland hylobatids, insular hylobatids have relatively lower, more posteriorly oriented, and anteroposteriorly wider mandibular condyles, with an increased distance between the condyles and the coronoid processes. This geographic pattern could reflect differences in functional demands on the mandible during mastication and/or could be driven by factors often associated with evolutionary pressures of island populations relative to mainland populations. The findings of this study highlight how little is known about Hylobates morphological variation and how important this is for using Hylobates to help interpret the primate fossil record. Understanding interspecific and intraspecific variation in extant primates is vital to interpreting variation in the primate fossil record.